13 best drill angles

Product description

Milwaukee's Right Angle Attachment allows contractors to drive screws and drill holes in tight, difficult work areas. This attachment is ideal for cordless drills and uses standard 1/4- inch hex accessories. It has a durable all-metal housing and steel gears with ball bearing construction which allows this adapter to handle up to 235 in.-lbs. of torque. The compact design measures only 2 inches wide allowing it to fit in tight spaces where work is difficult to perform. The convenient quick change chuck accepts standard 1/4-inch hex drive accessories.

Drilling holes and installing screws or bolts in an area too small for a conventional drill/driver can exhaust the patience of the most experienced contractor. When you get tired of using a stubby screwdriver you can either shell out the big bucks for a right angle drill or you can save your money and purchase Milwaukee’s right angle attachment. Milwaukee Tools, one of the most respected names in the tool industry, manufactures a 1/4-inch hex right angle attachment that is ideal for cordless drills up to and including the more powerful 18-volt models. The tool’s quick-change magnetic chuck accepts standard 1/4-inch hex drive accessories and the durable metal housing utilizes steel gears and ball bearing construction that gives the user a full 235-inch-pounds of torque. More than enough torque for driving screws or for drilling smaller holes. At only 2 inches wide, the tool will fit in very small and compact areas -- C. Dwight Barnett

• The product is easy to use
• The product is durable
• The product is manufactured in Taiwan
• 1/4-inch hex right-angle drill/driver attachment; accepts standard 1/4-inch hex shank bits
• For cordless 2.4- to 18-volt drills; up to 235-inch-pounds of torque; allows work in tight spots
• Durable all-metal housing and steel gears
• Only 2 inches wide for working in tight spots; 5-year warranty

User questions & answers

Question:	How do you rotate the handle about the shaft? (Not lift and lower) Mine seems to be stuck in one position
Answer:	Step 1 : Use low-speed handpice to polish the surface of teeth which need bonding . Step 2 : Put etching to teeth surface for 30- 60 seconds . Step 3 : Clean out etching from teeth surface and make teeth surface clear and dry . Step 4 : Put bonding (primer) to teeth surface Step 5 : Put adhesive paste to brackets (NOT to teeth ). Then use brackets gauge put brackets into correct position of teeth lightly for 30 seconds
Question:	What is the distance from the center of the drillbit to the edge of the adapter? Basically how close to a corner can I drill a hole
Answer:	I ordered it but it came out dry! And I don’t own them anymore but it was old!
Question:	Why does this one cost so much more than De Walt, Milescraft and others? It seems to be pretty simple looking compared to the rest
Answer:	Yes
Question:	What is the red 'unlock' handle for, and is it removable or movable or what
Answer:	Yes but I think I have a batch that doesn't work well

Product description

DEWALT impact ready right angle attachment provides users with best-in-class performance and accessibility for close-quarter fastening and drilling applications, Due to its compact front-to-back footprint and metal-gear case design. Robust magnetism is projected through the unit to give users fastener retention, enhancing the overall user experience and functionality.

• Best-in-class performance and accessibility, with 1.5 inch front-to-back design
• Magnetism for Fastener retention
• Engineered for use in impact drivers, allowing users to drill or drive
• Includes 1 right angle attachment

User questions & answers

Question:	What is the depth (front face of tool chuck to back face of right angle
Answer:	If you unscrew the red handle you should be able to move the collar to the position of your choice. I would suggest a bit of oil to make the rotation easier.
Question:	so you need special drill bits with this
Answer:	The distance from the center of the bit to the front or either side of the adapter is 0.51 inch, or a tiny bit more than half an inch. So you can drill a hole that is half an inch from both sides of a corner.
Question:	You state " an ideal accessory for your DEWALT impact driver. " Will it work with drills? And will it work with other brands of drills
Answer:	I think it is a matter of quality. The Milwaukee, the one I now own, is beautifully made of solid castings, high-quality gears, and a nice hex chuck with a pull-to-realease brass ring. The only organic (plastic) part I can find is the cover on the adjustable handle and the grease on the gears. The gears are tight with only about 3 degrees of lash.The Milescraft has a plastic handle with a simple hex magnetic chuck, not a positive locking chuck line the Milwaukee. The Dewalt DWARA100 has a larger case and places the tip of a standard #2 Phillips bit very close to the chuck obstructing view, while the Milwaukee provides a nice view of the bit-to-screw-head connection.Also the neither the Milescraft or the Dewalt show a handle to manage the significant torque of exerted by a right-angle attachment. I am not sure I would like to use one of these without this handle.Ultimately, the parts that really matter are the two gears and the bearings. These are not visible and I can only inspect the ones on my Milwaukee, which are excellent. The Dewalt claims a 5 times longer life than the "competition", so I assume this means they have good gears. My experience with a cheap model (no longer available) is that gears really matter.ou might want to read my review of the Milwaukee.
Question:	Does it have a chuck? How do you attach drill bits or driver bits to it? The picture is not clear. Thanks
Answer:	It is used as a grip for the head. It locks in multiple positions (from parallel to drive shaft to 90*) and can rotate from one side of the driver to the other. Turning that handle locks it in whatever position you find comfortable for the task at hand. It is not removable but if you lock it parallel to the drive shaft its like its not there. Its a great feature.

Product features

DEWALT Right Angle Attachment - Impact Ready - DWARA120

With a world-class performance, the DEWALT Right Angle Attachment is engineered with a magnetism for fastener retention. Made to be used in impact drivers, this tool by DEWALT allows you to driver or drill without any hassle.

Compact and Robust

DEWALT Right Angle Attachment - Impact Ready - DWARA120This tool’s front-to-back footprint and metal-gear design is compact, allowing you to easily carry it along with you in your tool set. Special features include a robust magnetism that is projected though the unit to give you a stunning fastener retention.

Holds Heavy Loads

The DEWALT Right Angle Attachment can be attached with cordless drills and impact drivers. With a smooth performance, this tool can also run at high performance speeds.

Product description

The DEWALT DWARAFS 12-inch Right Angle Flex Shaft features a true 90 degree right angle head for versatility. These have a Rapid Load design for quick bit changes. The fastener is supported by magnet for 100% alignment. The Flexible Shaft allows you to reach nearly any space, Side handle for additional leverage and support, and the Hex shank accepts any 1/4 In. shank.

• Rapid load quick bit changes
• Fasteners supported by magnet for 100% alignment
• True 90 degree right angle head for versatility
• Flexible shaft reaches nearly any space

User questions & answers

Question:	The bit seems to almost sink all the way into the shaft. There seems to be no way to tighten bit in the shaft. Is this how it is supposed to be
Answer:	From the face of the tool chuck to the back of the angle drill is one & nine/sixteenth inches (1-9/16"). From the end of the inserted phillips bit to the back of the angle drill is one & three/quarters inches (1-3/4"). It is very small. It even surprised me that is would fit into a phillips bit that only has (1-3/4") clearance. Hope this helps.
Question:	can you use hex shank nut drivers with this too? like a 7/16 bit or just screwdriver bits
Answer:	Yes.... you need drill bits with the hexagonal shank.
Question:	Does the phillips bit on the end come out? mine won't. i don't see any way this tool can be used with a drill bit? so, phillips screwdriver use only
Answer:	1/4" hex will work with any 1/4" impact driver... and will work with any drill drivers. Most drill drivers will accept at least 3/8", however many heavy duty drills are 1/2".
Question:	The description says it is a 'right angle flex shaft' but in the picture it appears to be pointing to the left - is this the right or left version
Answer:	The long end has a 1/4" hex drive that you chuck into your drill or driver. 1/4" hex drive bits go into the other end, which has a magnet to retain them. You will need a small screwdriver or punch to remove short bits (1" long).

Product features

DEWALT DWARAFS 12" Right Angle Flex Shaft

With a 12” Right Angle Flex Shaft, DEWALT Bit Holders enable users to reach nearly any hard-to-reach space. A Rapid Load head enables fast, easy bit changes, and each fastener is supported by a magnet for accurate alignment. A side handle offers additional leverage and support.

Features & Benefits

90 degree head and flexible shaft reaches tight spaces. 10X magnetic holding power on average vs. DW2505 using #8 truss-head screw. Rapid Load head for easy bit changes.

Product description

Comfortable, Compact and Portable . Ideal for DIY household use, this tool has a dual speed that ranges (0-600/0-2000) RPM for an increased user flexibility. Providing a wide range of applications, the DEWALT 20V MAX Right Angle Cordless Drill/Driver Kit is portable and can be carried anywhere. Lightweight yet sturdy, this hand tool by DEWALT is optimal for repetitive work and overhead tasks. Easy to Operate . A comfortable and soft grip adds comfort and control to this lightweight and cordless driver, reducing effort and making it easier to work for longer periods of time. For further ease of operation, this power tool is compact that allows you to fit into hard-to-reach spaces. The multi-grip trigger also provides utmost comfort and convenience.

• Dual speed ranges (0-600/0-2000) RPM for increased user flexibility provides a wide range of applications
• Compact front-to-back length (4 inches) allows users to fit into hard-to-reach spaces
• Multi-grip trigger provides comfort and convenience, allowing the user to get into tighter spaces
• Light weight at only 3.9 pounds to minimize user fatigue
• Powered by an Energy Star-qualified charger for a better environment

User questions & answers

Question:	Does this drill have a light
Answer:	You won't be able to "tighten" the bit up, push down on the bit and it will "lock" in place, push down on the silver ring to "unlock". The bit is designed to sink low to give maximum clearance in tight spaces and to be able to hold the screw between your thumb and index finger if need be and space allows. If you don't need that much space you can always use longer bits.
Question:	What is the chuck size? (how wide does it open
Answer:	If it's got a 1/4" shaft, this thing will turn it.
Question:	Is this drill powerful enough to drill through ceramic tile? I need to attach a toilet paper holder in a new bathroom in a tight space
Answer:	You can use the drill bits that have the hex ends on this. But no, not a regular drill bit.
Question:	Is this drill campatable with the larger 20v 3 amp batteries from other dewalt kits
Answer:	You have to use it in the down position. Then it switches to a right angle flex shaft, but only if turned clockwise. Might work if you turned it counter-clockwise, but never tried it that way.

Product features

Comfortable, Compact and Portable

Ideal for DIY household use, this tool has a dual speed that ranges (0-600/0-2000) RPM for an increased user flexibility. Providing a wide range of applications, the DEWALT 20V MAX Right Angle Cordless Drill/Driver Kit is portable and can be carried anywhere. Lightweight yet sturdy, this hand tool by DEWALT is optimal for repetitive work and overhead tasks.

Easy to Operate

A comfortable and soft grip adds comfort and control to this lightweight and cordless driver, reducing effort and making it easier to work for longer periods of time. For further ease of operation, this power tool is compact that allows you to fit into hard-to-reach spaces. The multi-grip trigger also provides utmost comfort and convenience.

Product description

Right Angle Drill, Chuck Size (In.) 3/8, - No Load RPM with R/A Low, - No Load RPM with R/A High, Drill Speed (RPM) 0 to 1300, Amps @ 120V 3.5, Reversing Yes, Double Gear Reduction, Bearings Ball and Roller, Spindle Size (In.) 1/2-20, Tool Length (In.) 11, Tool Weight (Lb.) 3.9, Cord Type 2 Conductor, 8 ft., Features 3-15/16 In. from Chuck to Back, Paddle Switch, Palm Grip Handle Type, Includes Chuck Key And Key Holder

From the Manufacturer

The 0370-20 Close Quarter Angle drill provides a unique chuck angle for reaching into tight areas. Its large paddle trigger and textured grip area provides comfort and control in all positions. The angled cord exit keeps the cord out of the work area. The convenient forward/reverse lever is easy to use in close quarters.

• Power Tools and Accessories
• Country of manufacture: China
• Manufacturer: Milwaukee
• Metal framed gear train for longer gear life
• Large paddle trigger for smooth control and easy grip-inch any position
• Angled chuck for reaching close quarters other drills cannot reach
• Textured palm grip reduces slipping
• Reverse lever for one hand operation

User questions & answers

Question:	Is this drill variable speed
Answer:	Yes, right below the bit and it's pretty bright.
Question:	Does this model still have the metal gears of the old version or are they all plastic now
Answer:	3/8 inch. plenty big for a battery drill.
Question:	What is the max rpm
Answer:	Yes. This drill will do the job well. I have used mine to place handicap-style safety bars in similier situations. I have two suggestions. First, if possible, use something to score the tile where planning to drill. I have used a diamond-tipped cutter with some success. Second, and more important, use the best, BRAND NEW drill you can find. Use a drill made for tile, not just a drill labeled for "brick" or "mortar" or "cement". I have also found it is important to drill straight into the tile at a true 90° angle to avoid "walking" the drill bit across the tile. Good luck with the project. I am confident this DeWalt drill will be up to the task. I find I often use this drill in place of my larger drills.
Question:	Can this drill be safely submerged in water
Answer:	Yes it is. Fits 3 amp and 4 amp batteries.

Product description

The new Chicago Pneumatic composite drills offer high level of ergonomics with

composite housing and easy-to-reach Forward – Reverse ring. They provide users high comfort and grip during drilling thanks to the thermoplastic rubber handles. Excellent for drilling and screw driving in confined areas

User questions & answers

Question:	Is this reversible? Does it have a variable speed throttle
Answer:	Yes. Speed can be controlled by changing pressure on trigger.
Question:	what is the optimal psi for this
Answer:	I agree with Marcia Sherman's reply. A very heavy drill. At the current price one would hope that Milwaukee would not use damage their reputation with plastics gears!
Question:	What tool is this?? if i look up the model number it says it is a big rig truck tire impact wrench! what is this
Answer:	1300 RPM per the viable. Great power.
Question:	Do you have, Same specification model with Keyless chuck.l
Answer:	No. There is nothing about it that suggests it can be safely used in a wet environment.

Product description

The DEWALT 20V MAX lithium ion 3/8-inch right angle drill/driver has dual speed ranges (0-500/0-2000 rpm) for increased user flexibility.

Set Contains:

DCD740 3/8" Right Angle , Belt hook, 2" Phillips tip bit and Drill/Driver

• Dual speed ranges (0-650/0-2000) rpm for increased user flexibility providing a wide range of applications
• Compact front to back length (4.0") allowing users to fit into hard to reach spaces
• Multi-grip trigger provides comfort and convenience, allowing the user to get into tighter spaces while still having access to the trigger
• 3/8" ratcheting chuck with deep hex pocket allows 2" (50 mm) hex bit to be fully inserted for getting into tight spaces.

User questions & answers

Question:	If the drill burns up, who do you contact to get it replaced
Answer:	Yes, its reversible, great for left hand drill bits.
Question:	Does this come with a battery
Answer:	Specs state "2000rpm @ 90 PSIG" . I have found that the vast majority of air tools rate @ 90 PSI. In our shop, I have the pressure regulator set at 120 PSI which has always worked well.
Question:	Does this product come with a carry bag
Answer:	It’s a angle drill, don’t know why it says that
Question:	If I bought this, I would have to buy batteries *and* a charger separately, right
Answer:	The model I have is CP879C and has a standard Jacobs key style chuck.

Product description

Milescraft 1304 Drill90PLUS - Right Angle Drill Attachment

• Compatible with most drill Accessories up to 3/8”
• Designed with a minimum reach of only 4”
• Handle length of 4. 25” for complete control
• 6-Sided hex shank
• Constructed with steel gears, 3 different types of bearings and integrated gear support

User questions & answers

Question:	what is the smallest bit it holds
Answer:	I would contact the manufacturer, DeWalt. I don't off hand know what the warranty covers nor what the length of the warranty is. But DeWalt could tell you. Before contacting them I advise you to find your receipt for when you purchased it. I think DeWalt has product registration, not completely sure if they do. But if they do and you registered your drill with DeWalt at the time of purchase, that will assist you in making a claim against the warranty.
Question:	What are the dimensions? Especially from the end of the chuck (silver) to the outside of the housing at the 90 degree turn
Answer:	no. it does not. i bought the dewalt drill/driver which came with 2 batteries. this was a much better deal (before christmas) than buying the aforementioned parts individually
Question:	what is the distance from the edge of the tool to the center of the chuck
Answer:	No just the bare tool
Question:	Is the side handle removable and/or attachable from either side
Answer:	Late to the party, but for the benefit of any other readers. A product code ending -B is a bare tool which means you get the tool only, with no battery or charger or bag or anything. The bare tools are intended for people who already have enough batteries and chargers to meet their needs. If you don't already have batteries and chargers etc you're better off buying a kit. The code will be much the same but instead of ending -B it will end in -P1 or -T2 or similar. The kit comes with a battery and charger, and often also includes a case or bag of some description. The kit usually works out cheaper than buying the battery and charger separately, although sometimes the kit comes with a small battery.

Product description

Turn your portable drill into a drill press and get the accuracy you need at a job site! The guide attaches directly to a 3/8" drill chuck, and allows you to drill larger pieces you can't fit on your stationary press. Pre-drilled holes allow you to attach a base or mount it to a table.

The Wolfcraft Drill Guide can be used in horizontal, vertical or angle positions, and fits all 1/4-inch or 3/8-inch drills. The Guide-bars themselves have springs for a quick return when doing repetitive drilling, while drill adapter itself slides up and down on guide-bars. Angle positions can go up to 45 degrees, and rubber pads in the base hold the guide in place while drilling. The guide also includes spring loaded depth stops.

From the Manufacturer

Now you can achieve drill press precision with your hand drill. Perfect for working on the job site. Guide attaches directly to 3/8inch drill chuck. Maximum 6000 RPM.

• Drill guide that can be used in horizontal, vertical or angle positions
• Guide-bars themselves have springs for a quick return when doing repetitive drilling
• Drill adapter itself slides up and down on guide-bars
• Angle positions can go up to 45 degrees, and rubber pads in the base hold the guide in place
• Fits all 1/4-inch or 3/8-inch drills

User questions & answers

Question:	Does this come with a chuck key? I haven't had a drill motor in years that needed one
Answer:	I've used a 3/64 bit in mine, never tried anything smaller then that.
Question:	Country of origin
Answer:	The unit measures 12mm from the end of the chuck to the outside of the housing at the 90 degree turn. The unit measures 112mm from the end of the chuck to the rear/back of the 90 degree turn The unit measures 160mm vertically. If you give me your email I can send you a photo showing all the measurements.
Question:	What is the dimension from the bottom of chuck to bottom of base
Answer:	A few thousandths less than ⅞ of an inch.
Question:	What is the diameter of the base & the hole in base
Answer:	Yes, the side handle is removable and can be attached to either side. There is a hex shaped recess on each side for the supplied hex bolt. No tools are required to attach or detach the handle.

Product features

wolfcraft Multi-Angled Drill Guide (4525404)

wolfcraft's Multi-Angle Drill Guide allows you to drill clean, accurate holes with your portable drill. Sets up fast and is perfect for indoor and outdoor projects where you need accurate holes, but using a drill press isn't an option. The guide is most useful for repetitive drilling and for drilling centered holes on board edges and round stock. The guide accommodates all 3/8 in. and 1/2 in. drill chucks and can be used in horizontal, vertical or angled positions, anywhere from 0-45 degrees.

Freehand Drilling Like A Pro

With this lightweight, practical attachment, drilling precise, centered holes becomes child's play. Whether it’s on the wall, on the ceiling, at a slant, or in round materials, exact drilling is easy.

Accurate, Centered Holes

Simply twist the base plate for immediate centering on board edges. Double guide bars are attached to the cast metal base scale and can be shifted back-and-forth to set your preferred angle up to 45°. The straight stop and the adjustable depth-stop make repetitive drilling a breeze.

Holds Round Materials Securely

Round materials are secured in the cast V-Groove channel, so even pipes can be drilled without slipping. The base plate has a centering device which guarantees centered drilling. For materials up to 3 inches in diameter.

No Slipping

The guide bars and removable handle make controlled, accurate drilling a reality. The base’s four pre-drilled holes allow you to attach a base or mount it to a table.

Product description

There are some fastening or hole boring applications that a standard drill / driver just can’t handle. Sometimes you need to work under a sink or in the rafters of a crawlspace. For those times, you’ll need to use a right angle drill that can work properly in those awkward environments. For those situations, use the Ryobi P241. It’s a compact, powerful drill that has more than enough torque and rotational speed for many household and professional applications. Beyond the 130 inch pounds of torque and 1,100 revolutions per minute, it comes loaded with features that provide you with maximum utility and comfort. When you’re on your back, losing your fasteners is the last thing you want to have happen. The onboard magnetic bit tray keeps them on you without worrying about dropping them. If your workplace is a little damp, you’ll still be able to maintain a grip with the carefully designed hex rubber overmold on the handle, allowing you maximum grip strength and freedom of movement in slippery conditions. The P241 also comes equipped with a powerful LED that will keep your work subjects illuminated when you need to see them the most. When you find yourself stuck under a sink or crawlspace, drilling holes with multiple different kinds of bits, you’ll be happy to have your trusty Ryobi product by your side.

• LONG-NECK DESIGN allows for greater leverage and reach into awkward places for specific applications that standard drill / drivers are not suited for, like plumbing or HVAC installation
• ONBOARD MAGNETIC TRAY holds bits and fasteners for when you want both hands open to use the tool while on the job
• LED LIGHTING keeps your job illuminated while working in dark or tight spaces, allowing you to work with improved accuracy
• RUBBERIZED OVERGRIP lets you hold this tightly in slippery conditions, allowing for greater control for proper fastener driving and hole boring
• ONE+ COMPATIBLE: This tool works with multiple 18V batteries in Ryobi’s suite, including the P100, P102, P103, P104, P105, P107, and P108

User questions & answers

Question:	can this be used as a socket wrench ratchet
Answer:	Yes, it does include a key for the chuck. I have an old, corded drill that has its own chuck key, but the key for my old drill is too large for the drill guide. I keep both chuck keys together so I know where to find them when I need them. The newer drills should have no problem. I was drilling with a 1/4" bit and had good results. Thanks, Darl
Question:	Does this tool have the Ryobi factory warranty
Answer:	Mine says China, purchased in Nov. 2016
Question:	Does this have hammer drill function? I'm assuming it does not
Answer:	I used a tape measure and the approximate distance from the bottom of the chuck to the bottom of the base is 6 5/16" when the guide is fully extended upward. When the guide is fully depressed against the springs, the bottom of the chuck moves down to within about 1 1/8" of the bottom of the base. Hope this helps, DS
Question:	Is there anything this drill "couldnt" do compared to a regular style drill? I'm looking for a decent drill for household work
Answer:	Base-5 1/2. Hole- 2 7/8

Product description

Work More Efficiently With The Most Versatile Right Angle Drill/driver On The Market. With A Head Size of Just 3-3/4?; This M12TM Right Angle Drill/Driver Is Compact And Lightweight For Drilling And Fastening In Tight Spaces; Yet Delivers 100 In-lbs of Torque. It?s The First Subcompact With A Spindle Lock Chuck For Maximum Versatility And Grip. It Also Features The Industry?s First Electronic Clutch; With 12 Torque Settings And An LED Indicator For Fastening With Complete Control. The M12 REDLITHIUM Battery Pack (sold Separately) Delivers More Work Per Charge And More Work Over Pack Life Than The Competitors.The Onboard Fuel Gauge Helps You Monitor The Charge Precisely; So There?s Less Downtime On The Job; And A Built-in LED Light Illuminates The Work Surface. An Extended Paddle Switch Gives You Ultimate Comfort And Convenience During Prolonged Use.

REDLITHIUM Battery Technology: Superior Pack Construction; Electronics; And Performance Deliver More Work Per Charge And More Work Over Pack Life Than Any Battery On The Market

Extended Paddle Switch: Provides Convenience And Comfort No Matter What The Job Requires

Innovative Electronic Clutch: Delivers Up To 100 In-lbs of Torque With 11 Settings Plus Drill Mode For Complete Control In Fastening Applications

3/8? Single Sleeve Ratcheting Chuck: Allows Quick And Easy Bit Changes And Maximum Grip

Built-in LEDs: Illuminate Work Surface And Indicate Clutch Position

Variable-speed Trigger: Provides Maximum Control

Voltage 12V

Tool Warranty 5 Years

Peak Torque 100 In-lbs

Chuck Type 3/8 Single Sleeve

Speed 0-800 RPM

"

• Work More Efficiently With The Most Versatile Right Angle Drill/driver On The Market. With
• A Head Size of Just 3-3/4?; This M12TM Right Angle Drill/Driver Is Compact And Lightweight
• For Drilling And Fastening In Tight Spaces; Yet Delivers 100 In-lbs of Torque. It?s The
• First Subcompact With A Spindle Lock Chuck For Maximum Versatility And Grip. It Also Features
• The Industry?s First Electronic Clutch; With 12 Torque Settings And An LED Indicator F

Product description

Ingersoll Rand 3/8" Chuck drills feature a quiet design, speed ranges from 1,200 to 2,500 and reversible and non reversible models. So, whether you are honing, reaming or drilling holes, we have a drill that is right for the application. One in a new family of economical, standard duty tools, the 7807R is an excellent choice for service work requiring a compact, low profile angle head. It's a durable, reliable tool for drilling in all types of materials, including sheet metal, wood and composites.

• Durable Jacobs multi-carft chuck
• Reversible, with convenient control
• Comfortable lever throttle
• Grease plug for easy preventative maintenance
• Precision machine gearing ensures maximum power transfer and durability

User questions & answers

Question:	Can the head be flipped 180° so the trigger is not on the palm side
Answer:	You can use an adapter to put a socket on the drive. You won’t be able to have a ratchet backs and forth.
Question:	What is the cfm rating@90psi and is it easy on air usage
Answer:	The reconditioned tools we sell carry a 1 year factory warranty. The new tools we sell carry a 3 year factory warranty
Question:	Is it a right hand left hand air drill
Answer:	Correct, is does not have hammer drill function.
Question:	In the description it states "quiet design". The one I received is so loud that it hurts my ears. how do i make mine quieter
Answer:	this drill has no clutch for setting the slipping force, so you could over drive screws. Ive had it torque my wrist when driving screws. It also is not balanced well enough to drill something like concrete without using two hands. I got this drill to only use in tight spaces, i personally prefer the traditional drill. But to answer your question truthfully, this would do the job any drill could do.

Product description

The PS11 12V Max Right Angle Drill/Driver is the only tool in its class to include two LED lights that articulate with the chuck to effectively illuminate dark work spaces. It has a 3/8-inch auto lock chuck with simple bit replacements for a variety of applications, including anything from driving 3 inch screws, drilling a pilot hole, or using a ¾ inch spade bit. Significantly faster than the current competition in Lithium-Ion, the PS11 has a compact size, making it small enough to reach into narrow spaces and corners. It weighs only 2.75 pounds and offers a soft grip handle for improved ergonomics and a secure grip.

• A 12V motor provides 1,300 RPM as well as 115 in-lbs. max torque
• 5-position pivoting head articulates from 90-degrees to 180-degrees, making it perfect for working in tight areas
• 3/8-Inch auto lock chuck for simple bit replacements and a variety of applications
• Variable-speed trigger for perfect speed regulation.Chuck design:Keyless
• Motor brake for exact serial screw driving

User questions & answers

Question:	Does it come with a charger
Answer:	No i don't believe so.
Question:	is this unit compatible with 12v batteries in Australia
Answer:	John, Here is the factory description on this tool: "Right Angle Air Drill, General Duty, Right Angle Style, Chuck Size 3/8 In., Free Speed 1800 rpm, HP 0.33, Drill Chuck Type Keyed, Average CFM @ 15 Second Run Time 4.00, CFM @ Full Load 17.0, Required Pressure 90 psi, Air Inlet 1/4 In. NPT, Min. Hose Size 3/8 In., Handle Material Aluminum, Variable Speed Yes, Throttle Type Lever, Reversing Yes, Overall Length 8-1/8 In., Right Angle Length 3 In., Tool Weight 2.42 lb." Let me know if this does not answer your question fully.Thanks,Earl
Question:	What is the length from the back of the tool to the tip of the chuck, at 90 degrees
Answer:	I'm not sure I understand the question you can use it with your left hand or your right hand but it does have a reverse option if that's what you're talking about
Question:	few pounds weighs sending the item to confirm this please
Answer:	Where ear plugs