11 best compact dewalt drill

Product description

The DEWALT DCD771C2 20 Volt MAX Lithium Ion compact drill driver has a lightweight design with a high performance motor that delivers 300 unit watts of power. The high speed transmission delivers 2 speeds 0 450 RPMs and 0 1500 RPMs. The ergonomic handle allows comfort and control. The tools weighs 3.6 pounds and contains 2 20 volt MAX compact Lithium ion battery packs, a compact charger and durable contractor bag. Chuck type - Keyless.

• Compact, lightweight design fits into tight areas
• High performance motor delivers 300 unit watts out (UWO) of power ability completing a wide range of applications
• High speed transmission delivers 2 speeds (0 450 and 1,500 rpm) for a range of fastening and drilling applications. Chuck type: Keyless
• 1/2 inches single sleeve ratcheting chuck provides tight bit gripping strength
• Ergonomic handle delivers comfort and control. Tool width: 1.9 inch
• Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. Battery capacity: 1.3 ampere hour

User questions & answers

Question:	can it drill 1/4 holes into plastic
Answer:	----Its not the drill, It's the BIT ----Hanson makes particular bits for drilling plastic, with any drill regardless of voltage, and theyre available most any good hardware store or Tap Plastics. They have a particularly pointed tip, so don't ever attempt to ever use them on wood or metal, as doing so would render it crapp for plastic use from then on. I have 1/8, 3/16, and 1/4 in my arsenal, and they pretty much cover any plastic, ABS, PVC, and especially Plexi-Glas projects I encounter. Yeah, they're a buck or two higher than regular bits, but they also wont crack your pretty plexi-glas project all to hell like a standard twist drill bit will.
Question:	Does this drill have a built in LED light
Answer:	Yes, it has a light. But it's worse than useless. It lights the area nearby, but casts a shadow on the spot you are drilling. The glare makes it actually harder to see what you're doing.
Question:	Would you recommend this drill over the DEWALT DC970K-2 18-Volt Drill/Driver Kit (http://www.amazon.com/dp/B002RLR0EY)? If so, why
Answer:	I had an oportunity to use the 18V when I installed the railings on my father in laws staircase. I worked absolutely great but I had to keep switching batteries and kept one on the charger. He got it last Christmas. I told myself then the Dewalt was far superior to the two brands of portable drills I was using that I was going to get a Dewalt for myself. Honestly, when I ordered the 20V I assumed it was the same as my father in law had but his was the 18V. I would be happy with either but the 20V I have is smaller in size and lighter than the 18V that he has. Plus the 20V lithium batteries last a long long time before you have to recharge but then again replacement batteries are expensive. I just used the 20V to build my garage and so far I've only swithed batteries 5 times and that includes all the siding, drywall, wire routing. BTW I use the new star bit screws for everything they are far superior to phillips and I have given all my boxes of phillips screws away; along with my two "other brand" cordless drills.
Question:	Does this unit come with one or two batteries
Answer:	As of March 22, 2020 the Description clearly says it comes with two batteries... "...The tools weighs 3.6 pounds and contains 2 20 volt Max compact Lithium ion battery packs "

Product features

20V Max Lithium Ion Compact Drill/Driver Kit

The DCD771C2 20V Max Lithium Ion Compact Drill/Driver Kit is lightweight and compact for working in tight spaces for long periods of time. High-speed transmission delivers 2-Speed variations allowing users to choose the level of performance needed for various applications.

Product description

This 20V max compact Brushless drill/driver kit includes two 20V max* Lithium Ion batteries, a charger, and a carrying bag. At only 6. 3 in. Front to back, This drill features a high performance Brushless motor that delivers 340 unit watts outs (UWO) and LED light to provide optimum illumination in dark spaces as you work. For increased comfort, The handle features an ergonomic design for balance and easier tool control along with a removable belt hook. Backed by a DEWALT 3-year limited so you can buy with confidence.

• Led foot light for superior visibility
• Variable speed trigger allows for control and precision on delicate work surfaces
• Dewalt built Brushless Motor for efficient performance and runtime
• 1/2 inch; Ratcheting chuck provides superior built gripping strength
• 340 UWO of power to help get the job done

User questions & answers

Question:	if some 1 converts U-W-O what is the in/lbs of torque of this drill
Answer:	The torque is 575 in-lbs.
Question:	Is this a drill and hammer drill
Answer:	No, this is a drill driver only.
Question:	the charger is to connect to 220v or 110v
Answer:	The charger uses 110V.
Question:	Can the charger be used with 240V power supply
Answer:	No, the DCD708C2 is rated for use with 110V-120V current.

• Compact, lightweight design fits into tight areas
• High performance motor delivers 300 unit watts out (UWO) of power ability completing a wide range of applications
• High speed transmission delivers 2 speeds (0-450 & 1,500 rpm) for a range of fastening and drilling applications
• 10x Magnetic Screw Lock
• Reduces breakage and longer life
• FlexTorq allows bits to flex up to 15 degrees

User questions & answers

Question:	Does this come with the extra battery, charger, case and 40 pcs bit set
Answer:	Total 8 legs (4 long and 4 short)

Product features

DEWALT 20V MAX Cordless Drill / Driver Kit, Compact, 1/2-Inch (DCD771C2)

The DCD771C2 20V MAX Lithium Ion Compact Drill/Driver Kit is lightweight and compact for working in tight spaces for long periods of time. High-speed transmission delivers 2-Speed variations allowing users to choose the level of performance needed for various applications.

• Compact, lightweight design fits into tight areas
• High performance motor delivers 300 unit watts out (UWO) of power ability completing a wide range of applications
• High speed transmission delivers two speeds (0-450 & 1,500 rpm) for a range of fastening and drilling applications
• 1/2" single sleeve ratcheting chuck provides tight bit gripping strength
• Ergonomic handle delivers comfort and control

FlexTorq, 40-Piece (DWA2T40IR)

IOur FlexTorq IMPACT READY accessories now come in ToughCase+ system, the latest addition to our accessory storage line. The ToughCase+ system is a connectable case system designed to optimize storage space and keep your bits organized. The bit-bar design allows for easy bit removal and the clear lid allows you to see inside at a glance. FlexTorq IMPACT READY accessories deliver exceptional performance for extreme torque applications. FlexTorq bits feature an Extended FlexTorq Zone to transfer optimal torque in hard joint applications, providing durability & longer life. The bit tip is CNC machined for a precise fit, reducing cam-out under torque.

• Connectable accessory storage system to optimize storage space
• Patented bit-bar design allows easy removal of bits and customizable placement
• Clear lid allows you to easily see contents at glance
• Clip latch for secure closing
• Extended FlexTorq Zone transfers optimal torque
• Magnetic Screw Lock sleeve minimizes drops & reduces wobbles

Product description

DeWALT DCD778B 20V MAX Cordless Brushless Compact Hammer Drill - Bare Tool

• Includes full manufacturer warranty

Product description

The DEWALT DCF885C1 20V MAX 1/4" impact driver kit features a compact (5.55" front to back), lightweight (2.8 lbs) design which fits into tight areas. It has 3 LEDs with 20-second delay after trigger release to provide visibility without shadows. This driver offers one-handed loading with a 1/4" Hex chuck that accepts 1" bit tips. Specs: MAX Torque: 1400.0 in-lbs, no-load speed: 0-2,800, impacts/min: 0-3,200 IPM, 1/4"qr Hex drive. Backed by DEWALT 3 year limited warranty. Kit includes: DCF885 impact driver, 20V MAX battery (1.5 Ah), fast charger.

• Increased visibility: Has built in LED with 20 second delay after trigger release
• Ergonomic Design: Compact (5.55 inches front to back)and lightweight (2.8 pounds) design fits into tight areas
• 1 handed Bit Loading: Has a 1/4 inch hex chuck and accepts 1 inch bit tips.
• Reliability: Tools backed by a 3 year limited warranty. Anvil type quick release
• Includes: DCF885 impact driver, 20 volt MAX battery (1.5 Ah), and fast charger
• Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18

User questions & answers

Question:	What is the product reference (number) of the charger ? I need to check the specs since the description: fast charger is not helping enough
Answer:	The charger is model number DCB107
Question:	Bit size
Answer:	This driver uses the 1/4" hex shank bits, but you could buy a 1/4" hex shank drill chuck adapter like the Neiko 20754A adapter that Amazon sells, and use regular drill bits.
Question:	Can you break Lugnuts off of tires with this impact driver
Answer:	Actually, I used it on a whim to change out the tire on my wife's CR-V. She discovered she had picked up a screw while at soccer practice. I grabbed this impact, the adapter, the socket, and my 4 way and headed to the park. I was planning on breaking them loose with the 4 way and zipping them off and on with the impact. I tried the impact first on a whim. It broke loose 4 of the 5 nuts, and did a good job of seating them all when I put the spare on. I finished torquing them with the 4 way, but I barely even budged them. They would have likely been fine with just the impact. Now, this tool wouldn't stand a chance against the lug nuts on my 1 ton diesel, but neither would any of 3/8" or regular duty 1/2" impacts.
Question:	Can you take simi, and regular tires off with this impact
Answer:	It certainly IS NOT going to take semi lug nuts off. It won't take the lugs nuts of pickups or SUVs either. And while it MIGHT manage to remove an under torqued lug nut from a tiny car, it WILL NOT pull properly torqued lug nuts off of anything. This is a ONE QUARTER INCH impact driver for screws, and small nuts and bolts. To pull wheels, get at least a 1/2" impact with 300 plus FOOT POUNDS of torque (and that won't do semi's)

Product description

The DEWALT DCD796D2 20V MAX XR Li-Ion 1/2" Compact Hammer drill Kit (2.0Ah) features a DEWALT brushless motor which delivers up to 57% more run time over brushed. The XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs. This unit is compact (7.5" front to back), lightweight (3.6 lb.) and designed to fit into tight areas. A high speed transmission with 2-speed settings (0-550/0-2,000 RPM) delivers up to 30% faster application speeds, with an ergonomic comfort grip handle that provides ideal balance & tool control. The metal 1/2" ratcheting chuck allows for superior bit gripping strength. This hammer drill also offers a 3-Mode LED hat provides lighting in dark or confined spaces up to 20X brighter than previous model, with an LED spotlight mode that features 20 minute shutoff function allowing for extended work time in dark or confined spaces. Kit includes: DCD796 - 20V MAX XR Li-Ion Compact Hammer drill, DCB203 - XR 2.0AH Battery Packs, Charger, Kit Box, Belt Hook.

• DEWALT brushless motor which delivers up to 57% more run time
• XR Li-Ion batteries with fuel gauge provide 33% more capacity
• Compact, lightweight design for tight spaces
• High speed transmission with 2-speed settings
• 3-Mode LED lights with a spotlight mode
• *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

User questions & answers

Question:	Does it come with the hard case, as seen in pictures
Answer:	Probably if the dog is a miniature. The metal was not very strong: using them on one cat, these wore out quickly.
Question:	I wonder, what is the power supply voltage of the battery charger? Or is it bivolt? And what is the frequency 50-60Hz
Answer:	yes can get new blades
Question:	how is the wobble on this drill and does the chuck come loose after drilling a few holes
Answer:	My cat has a little shredding, but he is not good about holding still.
Question:	Is this drill in hammer drill mode all the time or can it be switched between drill mode, drive mode, and hammer drill mode?? Thanks
Answer:	They have the wrong picture or the wrong description. I purchased nail clipper for my dog and that was the picture.

Product description

This pre-owned or refurbished product has been professionally inspected and tested to work and look like new. How a product becomes part of Amazon Renewed, your destination for pre-owned, refurbished products: A customer buys a new product and returns it or trades it in for a newer or different model. That product is inspected and tested to work and look like new by Amazon-qualified suppliers. Then, the product is sold as an Amazon Renewed product on Amazon. If not satisfied with the purchase, renewed products are eligible for replacement or refund under the Amazon Renewed Guarantee.

• Compact at only 6.3 in. Front to back designed to fit in tight spaces
• Lightweight at only 2.4 lbs.
• Led foot light for superior visibility
• Variable speed trigger allows for control and precision on delicate work surfaces
• DEWALT built Brushless motor for efficient performance and runtime

User questions & answers

Question:	Will 20v Max batteries work on this atomic
Answer:	The chain speed is 15 meters per second.

Product description

The Cordless Compact Drill / Driver and Impact Driver tools in this 20V MAX* XR Combo Kit have powerful motors of DEWALT cordless tools to deliver maximum runtime. DEWALT 20 volt tools feature a lightweight, compact design to fit in tight spaces, and the 3-mode LED gives users visibility in dark spaces.

• Brushless motor of cordless drill combo kit delivers up to 57% more runtime over brushed
• XR Lithium Ion batteries with fuel gauge in cordless tools combo kit provide 33% more capacity over standard packs
• DCD791 20V MAX* 1/2-inch Drill/Driver in the drill/ impact driver combo kit has a compact (6.9-inch front to back) and lightweight (3.4 lbs.) design to fit into tight areas
• DCF887 20V MAX* 1/4-inch Impact Driver has a compact (5.3-inch front to back) design to fit into tight areas
• DCD791 features a 3-mode LED with 20-minute trigger release delay in Spotlight Mode, providing increased visibility in dark or confined spaces
• DCF887 features 3 LEDs imbedded in front of tool with 20-second trigger release delay providing increased visibility in dark or confined spaces

User questions & answers

Question:	Hello from pensacola florida my question is can this thing take off a tire if not can you point me to on that dose thanks
Answer:	I would say yes but I did not get a case with mine Or the bits but any one I get bits for the case always fits the charger and drill in
Question:	How many inch pounds will this impact driver provide
Answer:	110v, como usan en los Estados Unidos.
Question:	Does it come with 2 batteries
Answer:	Don't know about the brushes, WORX could answer that (shoot them an email)….. but let me say this: best tool I have in the shop !! I use it all the time for drilling pilot holes in sheetrock or wood, and then switch to the appropriate driver for screws or whatever. Works GREAT for up to 10 or 12-size screws and maybe 1-1/2" or 2" length. Very happy with mine in the yard, barn, garden, or shop !
Question:	Does the drill have a hammer setting
Answer:	I’m using this drill bit and it’s working fine with me https://www.amazon.com/Bosch-9-Piece-Impact-Titanium-TI9IM/dp/B01H0NV5GM/ref=mp_s_a_1_8?keywords=bosch+drill+bit+set&qid=1557410623&s=gateway&sprefix=bosch+dri&sr=8-8

Product description

This compact brushless 2-tool kit features DEWALT cordless tools including one 1/2-inch hammer drill/driver, one 1/4-inch impact driver, two 20V MAX* lithium ion batteries, charger, and carrying bag. At only 5.1-inch front to back, the impact driver features a high-performance brushless motor that delivers 1700 in-lbs of torque and 3 LEDs for optimum illumination as you work. The hammer drill/driver's brushless motor provides 340 unit watts outs (UWO). The hammer functionality enables users to complete masonry drilling applications. The LED is positioned on the foot for better visibility. Both DEWALT 20 volt tools feature an ergonomic design for balance and easier tool control, along with a removable belt hooks. They are backed by a 3-year, limited warranty so you can buy with confidence.

• DCD709 hammer drill/driver in the cordless drill combo kit is compact at only 6.9-inch front to back designed to fit in tight spaces
• DCD709 hammer drill/driver in the cordless tools combo kit is lightweight at only 2.5 lbs.
• DCF809 Impact Driver of the drill/ impact driver combo kit is only 5.1-inch in length to fit in tight spaces.
• DCF809 Impact Driver has 1700 in-lbs of torque delivering the power you need to get a majority of applications done
• Both tools have a DEWALT built brushless motor for efficient performance and runtime
• DCF809 Impact Driver is lightweight at only 2.1 lbs.

User questions & answers

Question:	What is the AH of the batteries
Answer:	My husband is 6’2 “ and 255lbs and this fits him fine. He has no complaints .
Question:	Is the impact driver powerful enough to remove a zero turn mower blade
Answer:	Don’t know if it works with green works products. You need to compare them, get the still model number then call greenworks. I like greenworks, they make good products.
Question:	Are they 4.0 amps
Answer:	As long as you have a place for the slip hook to go on your trimmer I would say it would work.
Question:	Are these 4.0 amp units
Answer:	There is a swivel snap hook at the end of the two bottom straps. The hook fastens to a tab with hole. The tab is clamped to the trimmer's shaft and is adjustable for balance. There is a heavy vinyl plate behind the hook, it shields you from heat and distributes the weight against your thigh. Good piece of gear!
Question:	Does it comes with a handle
Answer:	Yes they are, they do have shorter inseams lengths you would see in pants, I am 6' and the 34 inseam are way to short for, best bet is trying on at a store then ordering. the reason for the 9 ply developed was the USFS seeing more powerful saws and the 9 ply offers more protection.
Question:	cuantas in.lbs tiene el taladro
Answer:	Yes, once they've been cut and done their job, they are to be disposed of. The saw will pull fibers from around the area of the cut to stop the chain. after that, they are no longer effective.
Question:	can a handle be used with it
Answer:	Hello Monica Simon All the batteries within the GreenWorks 80v line will be compatibles with the units in the GreenWorks 80v line.
Question:	What are the RPMs of this model
Answer:	Yes, the 4Ah battery will be able to be used with the chainsaw.

Product description

This Brushless compact cordless hammer drill/driver kit includes two 20V max* Lithium Ion batteries, charger, and carrying bag. It is only 6.9 in. Front to back, and its high-performance Brushless motor delivers 340 unit watts outs (UWO). the hammer functionality enables users to complete masonry drilling applications. The LED provides optimum illumination in dark spaces. The handle is ergonomically designed for increased comfort, balance, and easier tool control. It also has a removable belt hook. It’s backed by a 3-year, limited warranty so you can buy with confidence.

• Hammer functionality enables users to complete masonry drilling applications.
• Compact at only 6.9 in. Front to back designed to fit in tight spaces
• Lightweight at only 2.5 lbs.
• Variable speed trigger allows for control and precision on delicate work surfaces
• DEWALT built Brushless motor for efficient performance and runtime
• 1/2 in. Ratcheting chuck provides superior bit gripping strength
• Led foot light for superior visibility
• 340 UWO of power to help get the job done

User questions & answers

Question:	Is this good drill to buy
Answer:	Yes, my husband used it today and is very happy with his hammer drill.
Question:	What is the AH on each of the two batteries
Answer:	The DCD709C2 will include (2) DCB201 (1.5 AH) batteries.
Question:	Can the charger be connected to a 240 volts outlet
Answer:	The charger is rated for use with 110V / 120V current.
Question:	Does this have a switch that makes it a regular drill and then a hammer drill
Answer:	There is a model selection for drilling and screw driving.

Product description

The DEWALT DCD791B 20V MAX XR Li-Ion 1/2" Brushless Compact Drill/Driver (Tool Only) features a DEWALT brushless motor which delivers up to 57% more run time over brushed. This unit is compact (6.9" front to back), and lightweight (3.4 lb.), designed to fit into tight areas. A high speed transmission with 2-speed settings (0-550/0-2,000 RPM) delivers up to 30% faster application speeds, with an ergonomic comfort grip handle that provides ideal balance & tool control. The metal 1/2" ratcheting chuck allows for superior bit gripping strength. This drill also offers a 3-Mode LED that provides lighting in dark or confined spaces (up to 20X brighter than previous model), with a LED Spotlight mode that features 20 minute shutoff function allowing for extended work time in dark or confined spaces. Includes belt hook. This is a bare tool item - battery sold separately.

• Dewalt Brushless Motor which delivers up to 57 percent more run time
• Compact, Lightweight Design for tight spaces
• High speed transmission with 2 speed settings
• 3 Mode LED lights with a spotlight mode
• Battery and charger sold separately
• Maximum initial battery voltage (measured without a workload) is 20 volts; Nominal voltage is 18
• MAX Power: 460 UWO

User questions & answers

Question:	whats does type 1 vs type 2 mean on the side of the drill
Answer:	From the Dewalt website: The type number identifies the multiple versions of a specific model number. As it relates to service parts, a type 1 can be completely different than the type 2 version of a particular model number. The type number can and usually is as important to know as the model number in order to ensure you receive the correct service part(s). Every model number can have multiple type numbers or a little as no type number.
Question:	does this drill have a hammer setting
Answer:	Nope
Question:	Will the 20 volt li-ion dewalt battery interchange with b&d 20volt li-ion batery
Answer:	DeWalt is built by Black and Decker. The old style batteries were interchangable but the new 20 volt batteries have different tabs to prevent this. They do this to prevent people from buying a $20 black and decker battery and using it on all DeWalt tools. This forces people to buy the more expensive DeWalt battery if they have DeWalt tools.
Question:	Can this go in there
Answer:	Obviously this question was posed by someone who doesn't have an a native command of the English language, so in trying to understand the question, I think the question is "Does this tool come with the battery?". That's what is meant by the question "can this go in there?". That's my guess anyway. So, to answer the question, no, it doesn't come with the battery. It's a bare tool only, so no, it won't work without you buying a battery separately.

Product features

DCD791B

The DCD791B 20V MAX* XR Li-Ion Compact Brushless Drill/Driver is lightweight and compact for working in tight spaces for long periods of time. High-speed transmission delivers 2 speed variations allowing users to choose the level of performance needed for various applications. Comfort grip adds balance and control.