15 best angle drills

Product description

The BLACK+DECKER LDX120PK 20V MAX Cordless Drill and Battery Power Project Kit is a great power tool set for a variety of home projects. Includes 20V cordless drill, which provides an extra level of control with an 11 position clutch that prevents stripping and overdriving screws. The lithium ion battery is always ready and holds a charge up to 18 months. This battery powered drill kit includes 68 hand tools and accessories and a carrying bag for easy portability and storage. Includes carrying bag for easy portability and storage.

• Includes 20V Lithium drill for a variety of home projects, hanging pictures or wall decor, assembling furniture, updating fixtures, building birdhouses
• Lithium ion battery: Always ready, holds a charge up to 18 months
• The 11 position clutch prevents stripping and overdriving screws
• Included components: LDX120 drill/driver, 20 volt max lithium ion battery, charger, storage bag, tape measure, adjustable wrench, needle nose pliers, manual screwdrivers, utility knife, slip joint pliers, 12 ounce hammer, ratcheting screwdriver, hole saws with mandrel, (32) screwdriving bits, magnetic bit holder, (10) drilling bits, spade bits

User questions & answers

Question:	I need to replace the battery. Where can i find a spare that'll work for this set
Answer:	http://www.amazon.com/HQRP-LDX120PK-LDX120SB-LDX220SB-SSL20SB-2/dp/B013K0PZD8orhttp://www.walmart.com/ip/Black-Decker-Double-Pack-20V-Lithium-Ion-Battery-1.5-Ah-LBXR20-OPE2/30224752orhttp://www.lowes.com/pd_15822-34252-LDX120C_0__?productId=3522832It is a 20V 1.5Ah battery (MAKE SURE YOU BUY THE RIGHT ONE) for the B&D LDX120PK.
Question:	Can this drive screws or is it only a drill
Answer:	With this drill having a little over 100 in/lbs of torque, when competitors are offering over 1000 in/lbs, I wouldn't trust this to drive anything but the smallest screws.
Question:	Does this kit include the Drill Charger
Answer:	the kit I received did have a drill charger. I am very happy with this purchase.
Question:	the weight of the drill with the battery charged is the same with the dead battery
Answer:	It would not weigh any differently, although it's mass would be lower due to the number of electrons available, which would be around .00000000000000012 g. So if you had 814,000,000,000 it would would have 1 gram of mass less. Which if you were buying trillions of them, you could save several grams as far as shipping weight goes, although it would take 600 million cargo ships to carry that amount, so, unsure if the 1 gram gain would be very noticeable, especially since it would take around 30 billion (each semitrailer carrying 13,567 cartons, which might be a stretch) semitrailer containers (the 24' ones.) The ONLY problem is, that if they even produced, say 1000 drill sets/minute (which also seems a bit high) it would take 1,548,000,000 years to make that many sets. But, if you think that the amount of saved weight is worth it, buy 814,000,000,000,000 drills, use them, box them back up without adding any mass of any sort (including skin cells, which weigh somewhere in the neighborhood of 170,000x greater than the mass of an electron) and ship them, you would have shipped the items back with 1g less mass overall. We also didn't take into account elevation, which just by changing the amount of air in 814,000,000,000,000 boxes would be a "weight" difference in the millions of tonnes.

Product description

The Black & Decker LBXR20 20 Volt MAX Extended Run Time Lithium Battery is compatible with the 20-Volt MAX line of power and gardening tools. These batteries have been formulated for longer runtime and improved performance. This battery is compatible with cordless tool models BDC120VA100, BDCDMT120, BDCDMT120-2, BDCDMT120F, BDCDMT120IA, BDCF20, BDH2000SL, LD3K220, LCC220, LCS120, LCS120B, LD120VA, LDX120C, LDX120PK, LDX120SB, LDX220SB, LDX220SBFC, LGC120, GLC120B, LHT210, LHT2220, LHT2220B, LLP120, LLP120B, LPHT120, LPHT120B, LPP120, LPP120B, LST220, LSW120, LSW20, LSW20B, SSL20SB, SSL20SB-2.

• Ideal for drilling into wood, metal plastic and all screw driving tasks
• Chuck Size: 3/8 inch; Clutch Setting: 11; Included Components: LDX120 Drill/Driver, LBX20 20V MAX* Lithium Ion Battery, LCS20 Charger, Double Ended Bit; Power Source: Cordless
• Lithium Ion Technology & 20V MAX: Lighter, more compact, no memory, longer life
• 11 Position Clutch: Provides precise control for drilling into wood, metal, plastic, and all screwdriving tasks
• Compact and Lightweight: Less fatigue and allows users to drill / screw in confined spaces. Part of the 20V MAX System A System that Demands Attention
• Variable Speed: Allows countersinking without damaging material

User questions & answers

Question:	does it come with a light
Answer:	Yes, this hose is 4.0 I.D. X 75.0 LG.
Question:	Can i leave it charging over night without harming battery
Answer:	I ended up buying a totally new bag both of my closures failed. You can't fill the bag too much or those wing nuts tear loose from the bag. I use these to support the bag closure spring clamps. Just clip them along the edge after you fold the flaps over to close the bag. I use 2 clamps. Here's something like what I use. https://www.amazon.com/Lenox-Tools-VGP58100-Quick-Grip-Spring/dp/B00002244Z/ref=sr_1_4?ie=UTF8&qid=1543928604&sr=8-4&keywords=Irwin+spring+clamps
Question:	Does it come with charger and battery
Answer:	I have ordered and used it It is a quality replacement bag.. A bit expensive but good as original equipment
Question:	Is this drill sized and weighted well for use by a woman
Answer:	If you have the bag opening past the lip where the snout bolts on the bag will not come off. I cut the rear snout off behind the flange and put my bag on past the flange and it doesn't loosen. The cinch strap just needs put through the catch properly, with the teeth against the inserted end, so it stays tight.

Product description

DEWALT 20V MAX Cordless Drill / Driver Kit, Compact, 1/2-Inch (DCD771C2)

The DCD771C2 20V MAX* Lithium Ion Compact Cordless Power Drill/Driver Kit is lightweight and compact for working in tight spaces for long periods of time. High-speed transmission of this cordless drill with battery and charger delivers 2-speed variations allowing users to choose the level of performance needed for various applications.



DEWALT Black Oxide Drill Bit Set with Pilot Point, 13-Piece (DW1163)

DeWalt DW1163 13 Piece Black Oxide Split Point Twist Drill Bit Assortment

The DEWALT Black & Gold Metal Drill Bit Set features a black and gold coating for preventing rust. The tapered web design provides extreme durability to resist breakage. The DEWALT drill bits set features a 3-flats shank to reduce spin-out in the chuck. The Black & Gold metal drill bits are made of heavy-duty High Speed Steel for drilling into a variety of materials including plastic, wood, and metal. Each bit features a 135-degree split point tip design to help reduce walking.

• Product 1: Dewalt drill has compact and lightweight design that fits into tight areas
• Product 1: High performance motor of the power drill delivers 300 unit watts out (UWO) of power ability completing a wide range of applications
• Product 1: High speed transmission of Dewalt 20V drill delivers two speeds (0-450 & 1,500 rpm) for a range of fastening and drilling applications
• Product 1: 1/2-inch single sleeve ratcheting chuck provides tight bit gripping strength
• Product 2: 135-degree split point tip of the drill bits for wood, metal or plastic is designed to help reduce walking
• Product 2: DEWALT drill bit set is made from High Speed Steel to be used in plastic, wood, and metal
• Product 2: Tapered web design for extreme durability and resisting breakage of the drill bits
• Product 2: Black and gold coating to help prevent rust and wear

User questions & answers

Question:	does it comes with a battery charger
Answer:	Lighter natural tone

Product description

The BLACK+DECKER 12 Volt MAX* Cordless Drill/Driver is a lightweight, high-powered tool made for all kinds of household tasks. Drill through wood, metal, plastic and more all with this 2.18 lb tool. With its compact design, it is perfect for hanging pictures, assembling furniture, securing towel racks and other fixtures, and tightening loose screws. The BLACK+DECKER 12-Volt Max* battery delivers power, run-time and an all-around lighter weight so you can work longer and more efficiently without fatigue. 11-position clutch control lets you dial in your settings for the task at hand to prevent stripping screws and over drilling. Work in confined and low-light areas with a trigger-activated LED light. Thanks to the soft-grip handle, you can knock out your to-do list with ease and comfort.

• LIGHTWEIGHT DRILL AND SCREWDRIVER - Lightweight cordless drill and screwdriver for household tasks
• COMPACT DESIGN - 35% Smaller than previous 12V Drill/Driver models for easy maneuvering
• PRECISE CONTROL - 550 rpm motor with 11-Position clutch prevents over-drilling
• FAST SWITCHING - Keyless chuck makes swapping between bits easy
• LED WORK LIGHT - For working in dark areas

Product features

BLACK+DECKER 12V MAX Cordless Drill/Driver (BDCDD12C)

This compact and lightweight power drill and screwdriver is the perfect combination of power and size for a wide range of household DIY tasks.

11-POSITION CLUTCH

Precision clutch to prevent stripping screws and over-drilling.

LED WORK LIGHT

Trigger-activated LED work light illuminates your work area during use.

SOFT-GRIP HANDLE

Work in comfort with rubber handle accents to reduce vibration.

Find Your Setting

An adjustable 11-position clutch lets you dial in your settings to drill through wood, metal, plastic, and handle all screw driving tasks.

Find Your Setting

An adjustable 11-position clutch lets you dial in your settings to drill through wood, metal, plastic, and handle all screw driving tasks.

Find Your Setting

An adjustable 11-position clutch lets you dial in your settings to drill through wood, metal, plastic, and handle all screw driving tasks.

Lightweight Power

At just 2.18 lbs, the 12V MAX Cordless Drill/Driver is 35% smaller than the previous12-Volt NiCad version.

Product description

Comfortable, Compact and Portable . Ideal for DIY household use, this tool has a dual speed that ranges (0-600/0-2000) RPM for an increased user flexibility. Providing a wide range of applications, the DEWALT 20V MAX Right Angle Cordless Drill/Driver Kit is portable and can be carried anywhere. Lightweight yet sturdy, this hand tool by DEWALT is optimal for repetitive work and overhead tasks. Easy to Operate . A comfortable and soft grip adds comfort and control to this lightweight and cordless driver, reducing effort and making it easier to work for longer periods of time. For further ease of operation, this power tool is compact that allows you to fit into hard-to-reach spaces. The multi-grip trigger also provides utmost comfort and convenience.

• Dual speed ranges (0-600/0-2000) RPM for increased user flexibility provides a wide range of applications
• Compact front-to-back length (4 inches) allows users to fit into hard-to-reach spaces
• Multi-grip trigger provides comfort and convenience, allowing the user to get into tighter spaces
• Light weight at only 3.9 pounds to minimize user fatigue
• Powered by an Energy Star-qualified charger for a better environment

User questions & answers

Question:	Does this drill have a light
Answer:	You won't be able to "tighten" the bit up, push down on the bit and it will "lock" in place, push down on the silver ring to "unlock". The bit is designed to sink low to give maximum clearance in tight spaces and to be able to hold the screw between your thumb and index finger if need be and space allows. If you don't need that much space you can always use longer bits.
Question:	What is the chuck size? (how wide does it open
Answer:	If it's got a 1/4" shaft, this thing will turn it.
Question:	Is this drill powerful enough to drill through ceramic tile? I need to attach a toilet paper holder in a new bathroom in a tight space
Answer:	You can use the drill bits that have the hex ends on this. But no, not a regular drill bit.
Question:	Is this drill campatable with the larger 20v 3 amp batteries from other dewalt kits
Answer:	You have to use it in the down position. Then it switches to a right angle flex shaft, but only if turned clockwise. Might work if you turned it counter-clockwise, but never tried it that way.

Product features

Comfortable, Compact and Portable

Ideal for DIY household use, this tool has a dual speed that ranges (0-600/0-2000) RPM for an increased user flexibility. Providing a wide range of applications, the DEWALT 20V MAX Right Angle Cordless Drill/Driver Kit is portable and can be carried anywhere. Lightweight yet sturdy, this hand tool by DEWALT is optimal for repetitive work and overhead tasks.

Easy to Operate

A comfortable and soft grip adds comfort and control to this lightweight and cordless driver, reducing effort and making it easier to work for longer periods of time. For further ease of operation, this power tool is compact that allows you to fit into hard-to-reach spaces. The multi-grip trigger also provides utmost comfort and convenience.

Product description

DEWALT impact ready right angle attachment provides users with best-in-class performance and accessibility for close-quarter fastening and drilling applications, Due to its compact front-to-back footprint and metal-gear case design. Robust magnetism is projected through the unit to give users fastener retention, enhancing the overall user experience and functionality.

• Best-in-class performance and accessibility, with 1.5 inch front-to-back design
• Magnetism for Fastener retention
• Engineered for use in impact drivers, allowing users to drill or drive
• Includes 1 right angle attachment

User questions & answers

Question:	What is the depth (front face of tool chuck to back face of right angle
Answer:	If you unscrew the red handle you should be able to move the collar to the position of your choice. I would suggest a bit of oil to make the rotation easier.
Question:	so you need special drill bits with this
Answer:	The distance from the center of the bit to the front or either side of the adapter is 0.51 inch, or a tiny bit more than half an inch. So you can drill a hole that is half an inch from both sides of a corner.
Question:	You state " an ideal accessory for your DEWALT impact driver. " Will it work with drills? And will it work with other brands of drills
Answer:	I think it is a matter of quality. The Milwaukee, the one I now own, is beautifully made of solid castings, high-quality gears, and a nice hex chuck with a pull-to-realease brass ring. The only organic (plastic) part I can find is the cover on the adjustable handle and the grease on the gears. The gears are tight with only about 3 degrees of lash.The Milescraft has a plastic handle with a simple hex magnetic chuck, not a positive locking chuck line the Milwaukee. The Dewalt DWARA100 has a larger case and places the tip of a standard #2 Phillips bit very close to the chuck obstructing view, while the Milwaukee provides a nice view of the bit-to-screw-head connection.Also the neither the Milescraft or the Dewalt show a handle to manage the significant torque of exerted by a right-angle attachment. I am not sure I would like to use one of these without this handle.Ultimately, the parts that really matter are the two gears and the bearings. These are not visible and I can only inspect the ones on my Milwaukee, which are excellent. The Dewalt claims a 5 times longer life than the "competition", so I assume this means they have good gears. My experience with a cheap model (no longer available) is that gears really matter.ou might want to read my review of the Milwaukee.
Question:	Does it have a chuck? How do you attach drill bits or driver bits to it? The picture is not clear. Thanks
Answer:	It is used as a grip for the head. It locks in multiple positions (from parallel to drive shaft to 90*) and can rotate from one side of the driver to the other. Turning that handle locks it in whatever position you find comfortable for the task at hand. It is not removable but if you lock it parallel to the drive shaft its like its not there. Its a great feature.

Product features

DEWALT Right Angle Attachment - Impact Ready - DWARA120

With a world-class performance, the DEWALT Right Angle Attachment is engineered with a magnetism for fastener retention. Made to be used in impact drivers, this tool by DEWALT allows you to driver or drill without any hassle.

Compact and Robust

DEWALT Right Angle Attachment - Impact Ready - DWARA120This tool’s front-to-back footprint and metal-gear design is compact, allowing you to easily carry it along with you in your tool set. Special features include a robust magnetism that is projected though the unit to give you a stunning fastener retention.

Holds Heavy Loads

The DEWALT Right Angle Attachment can be attached with cordless drills and impact drivers. With a smooth performance, this tool can also run at high performance speeds.

Product description

M12 3/8 RAD DRILL TOOL ONLY. The product is easy to use. The product is durable. The product is manufactured in China.

From the Manufacturer

With a head size of only 3.75 inches, the 2415-20 M12 cordless 3/8-inch right angle drill driver delivers 100 inch-pounds of torque in a compact, lightweight design. The first sub-compact right angle drill driver with a spindle lock chuck, the 2415-20 is the most versatile right angle drill/driver in the industry. Built-in electronics include an electronic clutch, fuel gauge, speed control and overload protection. Includes: 2415-20 right angle drill driver (tool only).

• The product is easy to use
• The product is durable
• The product is manufactured in China
• Features 3/8-inch single-sleeve ratcheting chuck for maximum versatility and grip
• An extended paddle switch allows for controlled use in multiple positions
• Electronic clutch with 11 settings plus drill mode for complete control
• Built-in LEDs illuminate the work surface and indicates when clutch is out
• The on-board fuel gauge displays remaining run-time on the M12 lithium-ion battery pack

User questions & answers

Question:	Does it have enough speed/power to drill broken bolts
Answer:	With 60-minite auto shut-off function of non use.
Question:	Is that a metal sleeve on the chuck like the other M12 drills
Answer:	Yes，Its worldwide dual voltage is 100V-240V.Very convenient for travaling.Just buy the $5 conveter plug which takes the US plug straight and changes it into the round ones. No electricity changes.
Question:	Just received my drill works great ,it has two(2) led lights but only one lights up, is this normal or should both leds light up? thanks
Answer:	It's easy to curl you hair,you can see some online videos which teach you to style your hair, you can do it!
Question:	Is this right angle food for using brush attachments for carpet and upholstery in vehicles
Answer:	Yes，you can use it in anywhere

Product description

The DEWALT DWARAFS 12-inch Right Angle Flex Shaft features a true 90 degree right angle head for versatility. These have a Rapid Load design for quick bit changes. The fastener is supported by magnet for 100% alignment. The Flexible Shaft allows you to reach nearly any space, Side handle for additional leverage and support, and the Hex shank accepts any 1/4 In. shank.

• Rapid load quick bit changes
• Fasteners supported by magnet for 100% alignment
• True 90 degree right angle head for versatility
• Flexible shaft reaches nearly any space

User questions & answers

Question:	The bit seems to almost sink all the way into the shaft. There seems to be no way to tighten bit in the shaft. Is this how it is supposed to be
Answer:	From the face of the tool chuck to the back of the angle drill is one & nine/sixteenth inches (1-9/16"). From the end of the inserted phillips bit to the back of the angle drill is one & three/quarters inches (1-3/4"). It is very small. It even surprised me that is would fit into a phillips bit that only has (1-3/4") clearance. Hope this helps.
Question:	can you use hex shank nut drivers with this too? like a 7/16 bit or just screwdriver bits
Answer:	Yes.... you need drill bits with the hexagonal shank.
Question:	Does the phillips bit on the end come out? mine won't. i don't see any way this tool can be used with a drill bit? so, phillips screwdriver use only
Answer:	1/4" hex will work with any 1/4" impact driver... and will work with any drill drivers. Most drill drivers will accept at least 3/8", however many heavy duty drills are 1/2".
Question:	The description says it is a 'right angle flex shaft' but in the picture it appears to be pointing to the left - is this the right or left version
Answer:	The long end has a 1/4" hex drive that you chuck into your drill or driver. 1/4" hex drive bits go into the other end, which has a magnet to retain them. You will need a small screwdriver or punch to remove short bits (1" long).

Product features

DEWALT DWARAFS 12" Right Angle Flex Shaft

With a 12” Right Angle Flex Shaft, DEWALT Bit Holders enable users to reach nearly any hard-to-reach space. A Rapid Load head enables fast, easy bit changes, and each fastener is supported by a magnet for accurate alignment. A side handle offers additional leverage and support.

Features & Benefits

90 degree head and flexible shaft reaches tight spaces. 10X magnetic holding power on average vs. DW2505 using #8 truss-head screw. Rapid Load head for easy bit changes.

Product description

Ingersoll Rand 3/8" Chuck drills feature a quiet design, speed ranges from 1,200 to 2,500 and reversible and non reversible models. So, whether you are honing, reaming or drilling holes, we have a drill that is right for the application. One in a new family of economical, standard duty tools, the 7807R is an excellent choice for service work requiring a compact, low profile angle head. It's a durable, reliable tool for drilling in all types of materials, including sheet metal, wood and composites.

• Durable Jacobs multi-carft chuck
• Reversible, with convenient control
• Comfortable lever throttle
• Grease plug for easy preventative maintenance
• Precision machine gearing ensures maximum power transfer and durability

User questions & answers

Question:	Can the head be flipped 180° so the trigger is not on the palm side
Answer:	You can use an adapter to put a socket on the drive. You won’t be able to have a ratchet backs and forth.
Question:	What is the cfm rating@90psi and is it easy on air usage
Answer:	The reconditioned tools we sell carry a 1 year factory warranty. The new tools we sell carry a 3 year factory warranty
Question:	Is it a right hand left hand air drill
Answer:	Correct, is does not have hammer drill function.
Question:	In the description it states "quiet design". The one I received is so loud that it hurts my ears. how do i make mine quieter
Answer:	this drill has no clutch for setting the slipping force, so you could over drive screws. Ive had it torque my wrist when driving screws. It also is not balanced well enough to drill something like concrete without using two hands. I got this drill to only use in tight spaces, i personally prefer the traditional drill. But to answer your question truthfully, this would do the job any drill could do.

Product description

Get into those hard to reach places with the Bosch RHA-50 SDS-plus Right Angle Attachment. The attachment can be rotated 360 degrees in order to obtain the correct working position. The RHA-50 is compatible with all newer Bosch corded SDS-plus hammers featuring the 50mm collar, including the 11253VSR, 11255VSR, RH228VC, and RH328VC, as well as the cordless RHH181- 1, 11536-C and 11536VSR.THE RHA-50 does not fit Bosch models 11250VSR, RH328VCQ, RH432VCQ

• 90 degree angled attachment for Bosch SDS-plus hammers allows for drilling in concrete in hard to reach places
• Attachment can be rotated 360 degrees on the tool to obtain the correct working position
• Fits most newer Bosch corded SDS-plus rotary hammers: 11253VSR, 11255VSR. RH228VC, RH328VC and cordless models RHH181-01, 11536-C and 11536VSR
• Does not fit Bosch models 11250VSR, RH328VCQ, RH432VCQ

User questions & answers

Question:	Can you use any stub (short) drill bits with this attachment? where to find them if so, i mean stub (short) for metal and with sds shank
Answer:	This is a small table. More green than blue. Delivery was good, it was packed well. It is sturdy. The width is 15-1/2 inches. The length is 19-1/2". On the top of mine is a lamp and box of tissues. From the floor to the bottom shelf is 6-1/2". I have a basket on the bottom shelf. From the bottom shelf to the table top is 24".
Question:	How to disconnect front part on bosh 11255vsr, that one w/handle where you place different drill bits? any instruction to attach 90 dg attachment
Answer:	Some sort of wood. Very sturdy.
Question:	Can you use any bits or just Bosh bits with this attachment
Answer:	The base is black.
Question:	Will this work with 11236vs
Answer:	California has incredibly strict environmental labeling laws. Pretty much any item that contains metal, plastics, synthetic fibers, etc. will have that label so that it can be sold and shipped to California.

Product description

The Milwaukee Shockwave Right Angle Adapter features an Internal Optimized Shockzone which absorbs peak torque and prevents breaking. The shanks is made from Custom Alloy76 Steel which is engineered for extended life. The hardened gears provide increased torque transfer for added durability. With only a 1.4 in. Slim Profile, the adapter allows access into the tightest of spaced.

• Milwaukee Shockwave Impact Duty Right Angle Drive
• Model: 48-32-2390
• Optimized Internal Shockzone absorbs peak torque and prevents breaking
• 1.4" Slim Profile for tight access
• Pack of 1

User questions & answers

Question:	What is the length from the bottom of the hex shaft drill attachment to the shaft for the bit
Answer:	Yes, a charger is included with the kit.
Question:	Is this strong enough to drill holes in studs
Answer:	Thank you for your question. The shelf measures 17.75w x 13.75d. the distance between the legs is 13.5.
Question:	What is the width of the entire tool, measured left to right when staring into the shaft with the handle pointing down to the ground
Answer:	Thank you for your inquiry. The table measures 19.5x15.75x24. We would describe the finish as blueish green.
Question:	What is the width across the hex shaft, i.e. measured left to right when staring into the shaft with the handle pointing down to the ground
Answer:	I think they mean 17.5 inches wide. 7.5inches would be like a table for ants. Lol

Product description

Increase the versatility of your existing power drill with the Drive90PLUS Right Angle Drill attachment. Simply insert the Drive90PLUS into the chuck of your drill for access to those hard to reach and tight spaces. Impact Ready with improved gears for enhanced durability and longer life Design provides maximum comfort and control when drilling Only 1-1/2" wide, for maximum reach into those tight spaces Flat back handle to assist with perpendicular drilling Magnetic 1/4" hex socket accepts most standard hex accessories

• Impact ready
• New, improved gears with integrated gear support for longer life and durability
• Minimum reach of 1.5”
• Accepts most 1/4” hex Accessories and includes a Phillips driver bit
• Finger grip handle for maximum comfort and control when drilling

User questions & answers

Question:	Since it claims it's impact ready, I would assume there's not problem using this with an impact drill without a problem
Answer:	This RHA-50 Right Angle Attachment is designed for an SDS-plus drill bits. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	Can this be used with short driver bits without them getting stuck? How deep is the bit holder? (I have the Dewalt version and the hole is too deep
Answer:	"Hi! Please follow the instruction in using the RHA-50 Right Angle Attachment: 1. Remove the auxiliary handle of the power tool before you mount the right angle attachment. Keep the collar of the rotary hammer and the bore on the right angle attachment free of grease. 1. Slide the spacer ring onto the collar until it engages. The spacer ring secures the right angle attachment to prevent it from twisting. 2. Put the right angle attachment on the collar up to the stop surface of the rotary hammer and tighten the Allen screw using the Allen wrench. 3. Check that the right angle attachment is seated firmly against the contact surface of the rotary hammer. NOTE: Store the spacer ring together with the attachment after use. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST."
Question:	Does it have a locking 1/4" chuck
Answer:	Hi there! Using RHA-50 Attachment, the bit you need to use is still SDS-plus shank. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	How is this compared to dewalt dwara
Answer:	Thank you for your question. The RHA-50 SDS-plus Right Angle Attachment works with most newer Bosch corded SDS-plus® rotary hammers: 11253VSR, 11255VSR. RH228VC, RH328VC and cordless models 11536-C and 11536 VSR. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Product features

Milescraft Drive90PLUS

• Impact ready right angle drill adaptor
• New, improved gears with integrated gear support for longer life and durability
• Close quarter drill attachment with a minimum reach of 1.5”, for maximum reach into those tight spaces
• Finger grip handle for maximum comfort and control when drilling
• Flat back handle to assist with perpendicular drilling
• Accepts most 1/4” hex accessories and includes a Phillips driver bit

Product description

The Genesis GCQD38A 3/8" Close Quarter Drill has a unique shape and a compact head that allow it to get into tight spots where other drills can't. A 3.5 Amp Motor and 0-1600 RPM Variable Speed give you plenty of power and versatility and a Lock-On button and power-on indicator are included for convenience.

• Unique Shape and Compact Head-Gets Into Tight Spots Where Other Drills Can't
• Powerful 3.5 Amp Motor
• Variable Speed (0-1600 RPM) for Versatility
• Lock-On Button for Extended Use
• Power-On Indicator

User questions & answers

Question:	Is it reversable
Answer:	Try cycling the rotation ( CLOCKWISE / COUNTERCLOCKWISE ) switch a few times.
Question:	What are warranty term
Answer:	horizontal only
Question:	Has anyone used this as a sander? Specifically I would like to know if it's powerful enough to use as a bowl sander on a wood lathe
Answer:	I don't think so...but that's out of my area of expertise.
Question:	plastic or metal gears
Answer:	I bought 2 of these drills. The first ones charger died but being the price is right I bought a 2nd. Well the 2nd charger died too. Great drills crappy chargers. Well I just bought a dewalt 18v to 20v adapter and did some mcgaver stuff and my drill works agian!

Product description

Work More Efficiently With The Most Versatile Right Angle Drill/driver On The Market. With A Head Size of Just 3-3/4?; This M12TM Right Angle Drill/Driver Is Compact And Lightweight For Drilling And Fastening In Tight Spaces; Yet Delivers 100 In-lbs of Torque. It?s The First Subcompact With A Spindle Lock Chuck For Maximum Versatility And Grip. It Also Features The Industry?s First Electronic Clutch; With 12 Torque Settings And An LED Indicator For Fastening With Complete Control. The M12 REDLITHIUM Battery Pack (sold Separately) Delivers More Work Per Charge And More Work Over Pack Life Than The Competitors.The Onboard Fuel Gauge Helps You Monitor The Charge Precisely; So There?s Less Downtime On The Job; And A Built-in LED Light Illuminates The Work Surface. An Extended Paddle Switch Gives You Ultimate Comfort And Convenience During Prolonged Use.

REDLITHIUM Battery Technology: Superior Pack Construction; Electronics; And Performance Deliver More Work Per Charge And More Work Over Pack Life Than Any Battery On The Market

Extended Paddle Switch: Provides Convenience And Comfort No Matter What The Job Requires

Innovative Electronic Clutch: Delivers Up To 100 In-lbs of Torque With 11 Settings Plus Drill Mode For Complete Control In Fastening Applications

3/8? Single Sleeve Ratcheting Chuck: Allows Quick And Easy Bit Changes And Maximum Grip

Built-in LEDs: Illuminate Work Surface And Indicate Clutch Position

Variable-speed Trigger: Provides Maximum Control

Voltage 12V

Tool Warranty 5 Years

Peak Torque 100 In-lbs

Chuck Type 3/8 Single Sleeve

Speed 0-800 RPM

"

• Work More Efficiently With The Most Versatile Right Angle Drill/driver On The Market. With
• A Head Size of Just 3-3/4?; This M12TM Right Angle Drill/Driver Is Compact And Lightweight
• For Drilling And Fastening In Tight Spaces; Yet Delivers 100 In-lbs of Torque. It?s The
• First Subcompact With A Spindle Lock Chuck For Maximum Versatility And Grip. It Also Features
• The Industry?s First Electronic Clutch; With 12 Torque Settings And An LED Indicator F