14 best pillar drills

Product description

The DEWALT DCD771C2 20 Volt MAX Lithium Ion compact drill driver has a lightweight design with a high performance motor that delivers 300 unit watts of power. The high speed transmission delivers 2 speeds 0 450 RPMs and 0 1500 RPMs. The ergonomic handle allows comfort and control. The tools weighs 3.6 pounds and contains 2 20 volt MAX compact Lithium ion battery packs, a compact charger and durable contractor bag. Chuck type - Keyless.

• Compact, lightweight design fits into tight areas
• High performance motor delivers 300 unit watts out (UWO) of power ability completing a wide range of applications
• High speed transmission delivers 2 speeds (0 450 and 1,500 rpm) for a range of fastening and drilling applications. Chuck type: Keyless
• 1/2 inches single sleeve ratcheting chuck provides tight bit gripping strength
• Ergonomic handle delivers comfort and control. Tool width: 1.9 inch
• Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. Battery capacity: 1.3 ampere hour

User questions & answers

Question:	can it drill 1/4 holes into plastic
Answer:	----Its not the drill, It's the BIT ----Hanson makes particular bits for drilling plastic, with any drill regardless of voltage, and theyre available most any good hardware store or Tap Plastics. They have a particularly pointed tip, so don't ever attempt to ever use them on wood or metal, as doing so would render it crapp for plastic use from then on. I have 1/8, 3/16, and 1/4 in my arsenal, and they pretty much cover any plastic, ABS, PVC, and especially Plexi-Glas projects I encounter. Yeah, they're a buck or two higher than regular bits, but they also wont crack your pretty plexi-glas project all to hell like a standard twist drill bit will.
Question:	Does this drill have a built in LED light
Answer:	Yes, it has a light. But it's worse than useless. It lights the area nearby, but casts a shadow on the spot you are drilling. The glare makes it actually harder to see what you're doing.
Question:	Would you recommend this drill over the DEWALT DC970K-2 18-Volt Drill/Driver Kit (http://www.amazon.com/dp/B002RLR0EY)? If so, why
Answer:	I had an oportunity to use the 18V when I installed the railings on my father in laws staircase. I worked absolutely great but I had to keep switching batteries and kept one on the charger. He got it last Christmas. I told myself then the Dewalt was far superior to the two brands of portable drills I was using that I was going to get a Dewalt for myself. Honestly, when I ordered the 20V I assumed it was the same as my father in law had but his was the 18V. I would be happy with either but the 20V I have is smaller in size and lighter than the 18V that he has. Plus the 20V lithium batteries last a long long time before you have to recharge but then again replacement batteries are expensive. I just used the 20V to build my garage and so far I've only swithed batteries 5 times and that includes all the siding, drywall, wire routing. BTW I use the new star bit screws for everything they are far superior to phillips and I have given all my boxes of phillips screws away; along with my two "other brand" cordless drills.
Question:	Does this unit come with one or two batteries
Answer:	As of March 22, 2020 the Description clearly says it comes with two batteries... "...The tools weighs 3.6 pounds and contains 2 20 volt Max compact Lithium ion battery packs "

Product features

20V Max Lithium Ion Compact Drill/Driver Kit

The DCD771C2 20V Max Lithium Ion Compact Drill/Driver Kit is lightweight and compact for working in tight spaces for long periods of time. High-speed transmission delivers 2-Speed variations allowing users to choose the level of performance needed for various applications.

Product description

This Gray Triple Pillar Pod is an aftermarket gauge pod that is designed to fit your 2006-2010 Dodge Charger and allows you to easily mount three 2 1/16th inch (52mm) gauges directly to your A-pillar. This Dodge Charger triple pod is manufactured from high quality ABS plastic that allows it to withstand fading, cracking, as well as warping. GlowShift’s 2006-2010 Dodge Charger pod is easily mounted to your existing A-pillar with the included screws, giving it a custom fit and finish. This triple pillar pod includes all mounting hardware, installation instructions, free lifetime technical support, as well as a one year limited warranty.

• GlowShift Gray Triple Pillar Gauge Pod is Custom Molded to Fit the 2006-2010 Dodge Charger & Mounts 3 Aftermarket Automotive Gauges to the Vehicle's A-Pillar - Factory Color Matched - Overlay Design Mounts Pod on Top of the Factory A-Pillar
• Holds 2-1/16" (52mm) Gauges - Compatible with GlowShift 7 Color Series, 10 Color Digital Series, Elite 10 Color Series & Tinted Series Gauges
• Manufactured from High-Quality ABS Plastic - Designed to Protect Against Warping, Cracking & Color Fading
• Includes Pillar Pod Mounting Hardware & Installation Instructions
• GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support

User questions & answers

Question:	This product is compatible with my 06 dodge charger daytona
Answer:	Yes.
Question:	It says 06-07 Dodge charger, will this fit an 09 Dodge charger
Answer:	Dear Customer. We also provide 4.0Ah batteries and fast drill charger separately to bring more powerful power to the brushless drill.
Question:	will it fit a 2010 dodge charger sxt
Answer:	The light is bright enough to illuminate the work area without being over-bright. It's very helpful to have this lighting when working inside a cabinet or closet. It doesn't dim until your battery needs charging.
Question:	I have a 2008 Charger RT Daytona. Will this fit as well
Answer:	Dear customer, there is a power indicator on the battery. The lower the number of lights means the battery is low and it is time for you to charge the battery. Same as mobile power.

• GlowShift Gray Triple Pillar Gauge Pod is Custom Molded to Fit the 2008-2014 Subaru Impreza WRX STI - Mounts 3 Aftermarket Automotive Gauges to the Vehicle's A-Pillar - Factory Color Matched - Pod Replaces the Factory A-Pillar
• Holds 2-1/16" (52mm) Gauges - Compatible with GlowShift 7 Color Series, 10 Color Digital Series, Elite 10 Color Series & Tinted Series Gauges
• Manufactured from High-Quality ABS Plastic - Designed to Protect Against Warping, Cracking & Color Fading
• Includes Pillar Pod Mounting Hardware & Installation Instructions
• GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support

User questions & answers

Question:	This fits a 2012 Subaru Impreza wrx 2.5L
Answer:	Yes it is quite easy to instal and matches great. Getting the hardware wired and ran correctly is the hardest part but yes without a doubt it will fit.

Product features

Factory Fitted

Gray Triple Pillar Gauge Pod that replaces the factory A-pillar of the 2008-2014 Subaru Impreza WRX. Fits: 2008, 2009, 2010, 2011, 2012, 2013, 2014.

Factory Color Matched

GlowShift’s gray gauge pods for the Subaru Impreza are color matched to the factory A-pillar for a fully custom fit and finish.

Strong and Long-lasting

Each gauge pod compatible with the Impreza WRX is crafted from high quality ABS plastic to withstand cracking, fading and warping.

Mounting Hardware

Any mounting hardware required for the install comes with each purchase for a quick and seamless installation.

Product description

Specification:

Plug:US Plug 220V

Wattage:500W

Rotation Grade:9 Grades Adjustment

Principal Axis Rotation Speed:400~2500RPM

Principal Axis Distance:50mm

Principal Axis Taper:B16

Drill Chuck:3~16mm with Safeguard

Working Bench Size:170*175mm/6.69*6.89in(Adjustable)

Screw Diameter:230mm/9.06in

Base Size:320*195mm/12.6*7.68in

Stand Column Diameter:46mm/1.81in

Height:610mm/24.02in

Weight:18000g/39.68lb



Package List:

1*Drill Bench

1*16mm Drill Chuck

1*Users Manual

• The drilling depth can be adjusted individually by stopping the drilling depth.
• It is made of premium material,durable and has long service life.
• The bench rig uses 500W power that can drill through all materials, such as wood, plastic and even metal, covering almost all areas of private use.
• With the help of 9-grade speed control, the speed can be optimally adjusted so that even very hard materials can be drilled without difficulty.
• Rotating the drill floor ensures maximum flexibility, and the adjustable tilt angle also allows for inclined holes.

Product description

Flip-up safety guards are supplied with all GDM range pillar drills. These guards are ideal for replacing broken or damaged units, but will also fit most other popular drills. Check the collar size of the drill and order accordingly.

• Drill Press Guard 75mm
• Pillar Drills
• Guards

Product description

Remember when power tools were actually powerful? WEN’s 8-inch swing, 5-speed drill press is small but powerful enough to drill through metal, wood, plastics, and other materials. Max drill capacity is 1/2” in 1” thick cast iron. When you need accurate, repeatable holes, this tool will do the job more conveniently and precisely than a hand held drill. The perfect size for the shop and portable enough to take to the job. Constructed with a rigid frame consisting of cast iron: head, table, and base ensuring accurate holes. Its powerful induction motor features ball bearings for an extended life and it all comes together with smooth and balanced performance even at high speeds. The ½” chuck with JT33 spindle taper gives you versatility with a variety of bits. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. The base contains predrilled holes for mounting onto a bench or work stand. The slotted table allows for mounting clamps and vises for effective workholding. Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. Remember when you could drill holes in any material with ease? Remember WEN.

• Includes a 1/2-inch keyed chuck and onboard key storage
• Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
• Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations.Cord Length (ft.):6
• Durable 1/3 HP induction motor develops ample torque and power
• 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right
• Swing: 8 inch. Motor: 120V, 60Hz. Horsepower: 1/3 HP.

User questions & answers

Question:	ease of putting together
Answer:	It's really easy to put together. Just took me round 5-10 minutes.
Question:	What is the maximum width of material you are drilling (from drill center to hitting the pole
Answer:	i think the varied answers come from questions getting sent to people who have purchased different sizes. I noticed some of the reviews are also for other models. This item, the WEN 4208 has an 8-inch swing. So, you can drill the center of an 8- inch diameter object, or about 4- inches from drill center to body. The WEN 4210 & the WEN 4212 have 10- inch swings. Anyone trying to drill the center of a 9- inch wheel would need one of these models. This 4208 is a Great drill for the money. i like that the head can be swung over the edge of a work bench, which allows for drilling into long stock. Like into the bottom center of a 36" post. The beveling work table is another great feature & one i did not have on the press this will replace. If you have the space, consider the WEN 4214 with 12-Inch swing. it is still small enough to be bench top, but you can drill the center of 12- inch/ bowls & table tops.
Question:	Can you rotate the drill press on this unit 90 degrees, so that it hangs off the edge of the workbench, to drill into the ends of longer pieces of stock
Answer:	Yes you can, just be careful when ever you do this.
Question:	does it drill round holes
Answer:	I only drill square holes with mine.

Product features

Powerful. Versatile. Compact.

Remember when power tools were actually powerful? WEN’s 8-inch 5-Speed Drill Press is compact enough to limit space on your work bench but powerful enough to drill through metal, wood, plastics, and more. Drill up to a 1/2-inch hole in heavy-duty cast iron. Its powerful induction motor features ball bearing construction for an extended life, providing smooth and balanced performance even at high speeds. The 1/2-inch JT33 chuck gives you versatility with a variety of bits while the worktable bevels up to 45° left and right. Constructed with a rigid frame and a cast iron head, table, and base, ensure accurate holes and convenient drilling operations every time. Remember when you could drill holes in any material with ease? Remember WEN.

Locking Depth Adjustment

Set the depth adjustment knobs to limit your spindle travel for accurate and repeatable drilling operations.

Beveling Worktable

Bevel the worktable 45° left and right for precisely angled holes.

Onboard Key Storage

Place your chuck key on the attached key storage to make sure it is alway there when you need it.

1/2-inch Keyed Chuck

The JT33 chuck accepts drill bits up to a 1/2-inch in size to meet the needs of a variety of projects.

Product description

GlowShift’s 2003-2009 Dodge Ram Cummins Taupe Single Pillar Gauge Pod will mount 2 1/16” (52mm) gauge to your truck’s factory A-pillar trim, keeping the dashboard clear of any obstructions. This single pillar gauge pod features a taupe color that matches the factory trim of the 03-09 Dodge Ram truck and is designed to mount below the factory grab handle, allowing you to retain the grab handle. Each pod is manufactured from high quality ABS plastic that allows it to withstand cracking, fading and warping, as well as a UV coating that allows the pod to preserve its color after longtime exposure to the sun. GlowShift includes mounting hardware, installation instructions, a one year limited warranty and free lifetime technical support with each purchase.

• GlowShift Taupe Single Pillar Gauge Pod is Custom Molded to Fit the 2003-2009 Dodge Ram 1500 2500 3500 Cummins & Mounts an Aftermarket Automotive Gauge to the Truck's A-Pillar - Factory Color Matched - Overlay Design Mounts Pod on Top of the Factory A-Pillar
• Holds 2-1/16" (52mm) Gauge - Compatible with GlowShift 7 Color Series, 10 Color Digital Series, Elite 10 Color Series & Tinted Series Gauges
• Manufactured from High-Quality ABS Plastic - UV Coating Protects the Pod from Sunlight & Preserves the Color - Designed to Protect Against Warping, Cracking & Color Fading
• Includes Pillar Pod Mounting Hardware & Installation Instructions
• GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support

Product description

SPECIFICATIONS:

Fits circular pillars or round columns with a diameter of 12″(30cm) to 48″(1.2m) which is equal to a circumference of 38″(97cm) to 152″(3.9m)

Supports TV’s of upto 30kg/66lbs Support TV’s of 32″ to 55″

Full Motion swivel mount allows for upto 360° articulation.

NO DRILLING REQUIRED. Installation is without any drilling into column.

Fulfills requirements of condominium act Most flexible solution for mounting into pillar and columns Includes. SQUARE, RECTANGULAR, CIRCULAR. Does not effect constructional column strength.

Easy Install – No Power Tools required. Only a screwdriver and pliers.

Low Profile – Only 2.5″ away from column Swivelling Arm(s): offer(s) maximum viewing flexibility

Free-tilting design for multiple monitor viewing angle Cable Management: Keeps everything organized Strength tested up to 4 times the load. Quick-release latch locks/unlocks the display in place

Designed in Canada by experienced TV wall mounting professionals. Column wrap clamp tv mounting bracket system Patented design and technology. Multiple screen mounting and cable box mounting options are available

This product is perfect if you are looking for a column tv mount, pillar Tv mount, column wrap tv mount, pole mount tv bracket, concrete pillar tv mount, concrete column TV Mount, round column tv Mount, square pillar tv mount. TV can be mounted in Portrait or Landscape mode.

Buy now and enjoy the pleasure of watching television again with Condomounts Column TV Mount.

• COMPATIBILITY: Fits circular, round, square, rectangle, octagonal columns/pillars/posts with circumference of 38″(97cm) to 150″(3.8m) which equates to a diameter of 12″(30cm) to 48″(1.2m). Supports TV’s of upto 30kg/66lbs Support TV’s of 32″ to 65″ Full Motion swivel mount allows for upto 360 degrees articulation. Height fully adjustable anytime. VESA Compatibility 200x200,300x200,300x300,400x200,400x300, 400x400
• NO DRILLING: No Drilling required. Installation is without any drilling into column. Fulfills requirements of highrise building regulations. . Most flexible solution for mounting into pillar and columns. Does not effect constructional column strength
• MOTION: High gauge steel with Japanese made screw studs. This mount allows you to have your flat panel TV tilted for glare control or optimum viewing angle, pulled out from the pillar (635mm/25″ extension) and angled towards preferred viewing area up 270°. Push back into position at only 2" from Pillar.
• TECHNOLOGY: Ultimate Strength with PATENT PENDING SlotGRIPtech guarantees maximum adhesion onto a pillar or column of most size or form. Integrated cable management in order to keep potentially messy cords clean and organized.
• QUICK EASY & SLEEK : With the ultimate goal of keeping the installation easy. No power tools are required. Two person install in minutes. Backed by 5 YEAR MANUFACTURER WARRANTY and friendly tech support to help with any questions or concerns
• 5-YEAR WARRANTY: The Column TV Mount comes with a 5-year warranty and our friendly and responsive Canadian-based customer support team is available to answer any questions you may have during normal business hours.

User questions & answers

Question:	how do you manage wires
Answer:	Yes
Question:	Will this damage a pillar made of drywall
Answer:	Yes, this pod will fit as the body style is the same
Question:	Will this work on a square 7"x7" metal beam
Answer:	Not sure....I bought it and it fits my 2008 fine. I would ask the seller about a possible return if it doesn't fit.
Question:	My post is coated and painted, will it hurt it
Answer:	Sorry this pod will not work on your application.

Product features

Adaptable Mount

The wrap around column TV mounting bracket can easily tilt and articulate your flat or curved panel TV around any structural pillar/column with multiple degrees of freedom. The TV mount makes viewing your TV a pleasure.

Easy Installation

No additional tools are required to mount the Condomounts column TV mount. Quick setup and no sweat. We took care of everything. This pre-assembled arm comes complete with integrated cable management slots to ensure an elegant and tidy look.

No Drilling Required

Installation is without any drilling into column. Patent pending SlotGRIPtech developed by a team of mechanical engineers over 3 years is used in this mounting system that has a strong hold of any object onto a pillar or column of any size or form.

• 3 Variable speeds per minute: I:0-8000r/min, II: 0-11000r/min, III:0-16000r/min.
• Clamp Diameter:1-10 mm; Drilling Diameter: 0.6-6.5 mm / 0.02-0.2 6inch.
• Great speed,Mainly used for wood, plastic plate, a resin plate, aluminum, composite panels and another non-hard material drilling. Can also be used for DIY furniture, work easily, drilling holes more accurately.
• High quality drilling, easy operation, good stability. With speed regulating switch, speed can be adjusted easily.
• Great speed, low noise, long life drilling no swing, drill breakage rate is very low, high efficiency.（If you have any questions after purchase, please contact us to solve it for you.）

User questions & answers

Question:	This is a true 120v motor? not the 220v model i see on amazon that advertises it works also on 120v
Answer:	yes, my understanding is that there is an adapter available through Pioneer to make it wifi.
Question:	Where does this product ship from? Thank you
Answer:	Yes they can. I have B wired into a speaker select switch and I can select between my outside speakers or my speakers in the kitchen.
Question:	How straight and stable is the chuck? Is there much runout with a typical drill bit
Answer:	Hello Julie, the VSX-834 is a seven channel receiver, meaning it can support and operate up to 7 speakers at a time. If you wish to operate all nine speakers at the same time, you will need a separate amplifier connected to the ZONE B Line Out (this will mirror the one set of speakers connected to the SPEAKER B terminals). - MM
Question:	Does this turn both forward and in reverse
Answer:	Hello Magnumtripod, this can be the result of the settings or the source material. Please contact our technical support line to go over your settings to verify what may be causing your issue. - MM

Product features

EWANYO 340W 3-Speed Mini Drill Press Bench

• 3 Variable speeds per minute: I:0-8000r/min, II: 0-11000r/min, III:0-16000r/min.
• Clamp Diameter:1-10 mm; Drilling Diameter: 0.6-6.5 mm / 0.02-0.2 6inch.
• Great speed, low noise, long life drilling no swing, drill breakage rate is very low, high efficiency.
• High quality drilling, easy operation, good stability. With speed regulating switch, speed can be adjusted easily.
• Great speed,Mainly used for wood, plastic plate, a resin plate, aluminum, composite panels and another non-hard material drilling. Can also be used for DIY furniture, work easily, drilling holes more accurately.

Package Included:

1 x Electrical Machinery

1 x Drill Chuck

2 x Hex Key

2 x Accessory

• BL Brushless Motor delivers 1,090 in.lbs. of Max Torque
• Ergonomic design at only 8-1/8" long and weighs only 5.9 lbs. with battery (battery not included)
• 3-stage L.E.D. gauge indicates battery charge level
• All metal variable 2-speed transmission (0-550 & 0-2,100 RPM) for a wide range of applications
• Includes: Tool with side Handle, side clip in MAKITA Retail Box. (NOT on Brown Box)

User questions & answers

Question:	Does this come with a 3 yr warranty
Answer:	It only comes with 90 days warranty. I wouldn't worry about it, this drils lasts for a while. I used and abused the one I had before I bought this one , for 4 years plus and I loved it
Question:	what are the overall dimensions? In particular from the chuck to the back of the drill housing along the axis of the chuck
Answer:	The size is about the same as a 1/2 cordless drill. I returned this item and bought a hammer drill that uses spline bits. If you haven't a cordless drill now, this would be ok. It's really a drill with hammer features. If you plan to work in concrete or tile, you really need the other type hammer drill

Product description

Drill straight holes all the time! With the DrillMate you can drill straight or angled holes, drill on the edge of a board or even round stock. The drive shank attaches to your 3/8" Or 1/2" power drill while the keyed output chuck works with most 3/8" drill accessories. The all-metal construction DrillMate provides the precision of a drill press with the ease of a hand drill. Smooth operation and controlled drilling via spring and bearings prevent cutting tool from hitting work piece. Adjustable depth-stop makes repetitive drilling to any depth with near drill press precision. The metal base has a scale with easy to read angles, v-grooves for centering of round materials, and holes for permanent mounting for special fixture applications. Also includes auxiliary handle for controlled movement and rubber feet that give the base a nonslip option.

• Perfect for straight or angled drilling, drilling on the edge of a board or on round stock
• Attaches to all 3/8" And 1/2" Power drills and it also includes a 3/8" Capacity chuck with key
• Angle cuts of 45 Degree to 90 degrees, with a built in angle read out in the all metal base
• Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter
• Adjustable depth stop and spring action control of the head

User questions & answers

Question:	What's the max depth of cut
Answer:	As answered you can get a copy of the manual from Grizzly or from Amazon.http://cdn0.grizzly.com/manuals/w1668_m.pdfandhttp://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000041994.pdfThey are not identical (40 pages on the Grizzly website, and 27 on the Amazon page).On difference is the depth stop. On the Grizzly site it is a jam nut on the depth stop rodon the left side, on the Amazon it is set on a collar lock knob on the spindle on the right side.My drill press has both depth stops, but the spindle does not have the depth label, and is notmentioned in the manual that came with the drill. When using the oscillating sander feature itcould be damaged if either stop is set.
Question:	Does it use Bearings or Bushings for the spindle
Answer:	I'd been wondering this myself... The Stock part on my W1668 is not a belt, but rather a polyurethane o-ring. The closest analogue I could find was here: http://www.amazon.com/dp/B0051Y2LSO/ref=biss_dp_t_asn If you want true OEM parts, you can call Woodstock international at (360) 734-3482 7AM-5PM PST/PDT M-F
Question:	Does anybody know how many inches the stroke is? Thank you
Answer:	Yes. Page 14 of the manual supplied with the drill press says, "The drill chuck is seated to the spindle with a JT-33 tapered surface and a screw."
Question:	What's the diameter of the opening in the base
Answer:	Also..it's a GREAT drill press!

Product features

Milescraft DrillMate

With the Milescraft DrillMate portable drill stand, you can drill straight holes, angled holes, on the edge of a board or even round stock. Everyone knows that the success of many DIY projects depends on drilling straight and accurate holes. Now you can add a whole new level of accuracy with this drill guide jig when drilling holes with your standard hand drill.

All Metal Head

Head is all metal construction that has a hex shank chucks to 3/8" and 1/2" drills. Easy glide bushing in the head, eliminate play and wobble, for precise drilling.

Adjustable Angle Settings

Angle readout for setting drilling angles to 45°, 60°, 75°, and 90°

V-groove

Metal base and three v-grooves for drilling on round stock.

TPE Feet

Non-slip TPE feet prevent slipping and marring on the work surface, that can be removed to mount with screws when needed.

Large Handle

Can be mounted in a fixed position on the base for maximum support no matter what drilling motion you are doing.

Depth Stop

Adjustable depth stop for repetitive drilling.

3/8" Keyed Chuck

Compatible with most 3/8” drill accessories and includes chuck key, which can be store in the TPE feet holes.

Product description

Remember when you could support your big old workpieces? Take your drill press to the next level with the WEN Drill Press Table. The spacious 23-7/8-by-11-7/8-inch table creates an additional 275 square inches of space for your projects. Onboard rulers maximize accuracy for precise and even cuts while the adjustable fence slides back and forth to fit the needs of any project. The sturdy 1-inch thick MDF body prevents warping and wobbling during operation while the fence’s stop block adjusts along the fence to help center your workpiece. The removable insert allows users to drill completely through their workpiece without damaging the table. Compatible with the entire line of WEN drill presses, including the WEN 8-Inch Drill Press (model 4208), the WEN 10-Inch Drill Press (models 4210 & 4212), the WEN 12-Inch Drill Press (model 4214), the WEN 15-Inch Drill Press (model 4225), and the WEN 17-Inch Drill Press (model 4227). Although this drill press was designed with WEN in mind, it’s universal fit allows for installation on the majority of drill presses on the market. Simply tighten the mounting clamps onto tables anywhere from 5 to 16 inches in width. And, because its a WEN product, your drill press table comes backed by a friendly customer help line and a two-year warranty, all to make sure you remember WEN.

• Expand your workspace by 275 square inches (23-7/8 inch width, 11-7/8 inch depth)
• Spacious table measures in at 23-7/8 x 11-7/8 x 1 inches
• Fits any drill press table between 5 and 16 inches in width
• Designed to fit the entire WEN Drill Press Series
• Includes an adjustable fence, a sliding fence stop block, onboard rulers, and a two-year warranty

User questions & answers

Question:	How does this drill fence mount to the wren drill press table
Answer:	It does, but there is a big "BUT". The table mounts to the drill press table via two clamps that attach to the bottom. Unfortunately, this clamping mechanism is not very stable. It easily comes loose. In my case, I purchase 4 screw fasteners, moved the attachment point to match the slots on the drill press table and then attached the table to the drill press table. Now it is rock solid. The fence is good quality, but with a 12 " drill press the mounting was problematic. Once I made the modifications, all is good!
Question:	Why are these q&as all about a drill press when the item advertised is a drill press table
Answer:	Many drill press manufactures make specific tables to fit their drill press pad. some have many different slots for different types of bolting fixtures for the drill press. Different fixtures are only compatible with specific drill press tables. It is important to see the bolting selections to match your drill press.
Question:	How far isback of table to center of hole on table
Answer:	The rear edge of the table is 4 inches from the center of the hole. With the fence in place, the hole center is 3 inches from the fence, if aligned at the edge of the table. The hole is also 12 inches from the table side edges.
Question:	Does this come with hold down clamps for the t-tracks? If not, what is recommended? thx
Answer:	I did not get hold downs but they are available.

Product features

WEN DPA2412T 24 in. x 12 in. Drill Press Table with an Adjustable Fence and Stop Block

Remember when you could support your big old workpieces? Take your drill press to the next level with the WEN Drill Press Table. The spacious 23-7/8-by-11-7/8-inch table creates an additional 275 square inches of space for your projects. Onboard rulers maximize accuracy for precise and even cuts while the adjustable fence slides back and forth to fit the needs of any project. The sturdy 1-inch thick MDF body prevents warping and wobbling during operation while the fence's stop block adjusts along the fence to help center your workpiece. The removable insert allows users to drill completely through their workpiece without damaging the table.

Compatible with the entire line of WEN drill presses, including the WEN 8-Inch Drill Press (model 4208), the WEN 10-Inch Drill Press (models 4210 & 4212), the WEN 12-Inch Drill Press (model 4214), the WEN 15-Inch Drill Press (model 4225), and the WEN 17-Inch Drill Press (model 4227).

Although this drill press was designed with WEN in mind, it's universal fit allows for installation on the majority of drill presses on the market. Simply tighten the mounting clamps onto tables anywhere from 5 to 16 inches in width.

Features

- Expand your workspace by 275 square inches (23-7/8 inch width, 11-7/8 inch depth)

- Spacious table measures in at 23-7/8 x 11-7/8 x 1 inches

- Fits the majority of drill press tables between 5 and 16 inches in width

- Designed to fit the entire WEN Drill Press Series

Product description

Remember when power tools were actually powerful? WEN’s 10-inch swing drill press with laser centering device is a powerhouse for your shop. Packed with features that you’ll find in larger, more industrial type drill presses, you can power through metal, wood and other materials with ease. Change from five speeds to target the exact RPM right for your project (600, 1100, 1700, 2400, 3100 RPM). Rigid frame construction of cast iron provides sturdiness and reliability. Its powerful induction motor features ball bearings for an extended life, all combining together with smooth and balanced performance at any speed. The 1/2” chuck with JT33 spindle taper gives you versatility with a variety of bits. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. Base has predrilled holes for mounting onto a bench or work stand. The X-pattern Class II 1mW laser locks-on to your drill points saving on guesswork and sparing expensive materials. A very versatile and valuable tool for any shop especially when you expand its range of use with optional accessories such as mortising attachment, drum sanders, circle cutters, etc… Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. Remember when you could drill holes with laser precision? Remember WEN.

Do not use power tools in the presence of flammable liquids or gases

• Includes: drill press, class II 1mW laser, 1/2" keyed chuck & key, tools for assembly
• Adjust between five speeds from 600 to 3100 RPM
• Spindle travel of 2-1/2” with easy to read, locking linear depth stop for accurate and repeatable drilling operations
• Durable 3.2-amp motor provides ample torque and power
• 7-5/8 x 7-5/8" cast iron worktable features rack & pinion height adjustment and bevels up to 45 degrees left & right

User questions & answers

Question:	I just purchased this. One of the lasers don't produce a line making it useless, how can I fix this. I tried adjusting and spinning it what am I miss
Answer:	I don't recommend fixing laser beam by yourself, I recommend to return drill press and get a new one. Good luck!
Question:	Which depth stop is better for a high level of accuracy, the circular type found on the 10" model, or the stem and nut type found on the 8" model
Answer:	This isn't a class A machine tool. If you need a rigid spindle and accurate stop settings, you better figure on $500 to $750 price range. However, I'm going to say the circular type will be more accurate on this one because clearance between bore of drill head and spindle assembly will cause spindle to move sideways when stem and nut hit the stop in this class of drill press.
Question:	How do i remove and replace a new chuck
Answer:	The Chuck is mounted on a taper. You need to break the taper using something like a ball joint fork. Not many people would have one of these, so opposing wooden wedges would do the trick. Just remember when the taper lets go, you should have a small bucket to catch the chuck, or it could be damaged in the ensuing flight. Clean both the drive taper, and chuck, dirt and rust are your enemy. Apply light coat of oil, replace chuck on shaft, and tap upward using a wood block between chuck and hammer so as not to damage chuck. Check for run out using a piece of round stock in chuck, and you should be done.
Question:	Can the table be removed? (I have a project that requires no table
Answer:	Yes, you could just assemble it without the table. Alternatively though you can just turn the table around to face the other way so it's not in the work area.

Product features

Drill with Laser Precision

Remember when power tools were actually powerful? WEN’s 10-inch 5-Speed Drill Press powers through metal, wood, plastics and more. Change from five speeds to target the exact RPM right for your project (600, 1100, 1700, 2400, 3100 RPM). Rigid frame construction of cast iron provides sturdiness and reliability while the powerful induction motor features ball bearings for an extended life, of smooth and balanced performance. The 1/2-inch chuck with JT33 spindle taper gives you versatility with a variety of bits. The worktable bevels 45° left and right for those tricky operations requiring precisely angled holes. The X-pattern laser locks-on to your drill points saving on guesswork and sparing expensive materials. Remember when you could drill holes with laser precision? Remember WEN.

Precision Laser

The laser light specifies the exact spot that the bit will travel through for maximum precision during drilling.

Depth Adjustment Gauge

Set the depth adjustment lever to limit your spindle travel for accurate and repeatable drilling operations.

Beveling Worktable

Bevel the worktable 45° left and right to ensure precise angled drilling.

Onboard Work Light

Illuminate your workpiece with the onboard work light for maximum visibility and precision.