14 best bench top drill press

Product description

Remember when power tools were actually powerful? WEN’s 12-inch swing, variable speed drill press with laser centering device, is a powerhouse for your shop. Packed with features that you’ll find in larger more industrial type drill presses. This bench-top, cast iron drill press has the power to drill through metal, wood and other materials. Max drill capacity is 5/8” in 1” thick cast iron. The variable speed feature allows you to target in the exact speed (infinitely from 580-3200 RPM) that works for your project. While you are working you simply move a lever and adjust the speed as needed. No pulleys and belts to change! Our design uses a mechanical variable speed which allows for the same power and torque through the entire speed range. A digital readout powered by LED’s displays the running speed. Constructed with a rigid frame consisting of cast iron: head, table, and base, ensures accurate holes. Its powerful induction motor features ball bearings for an extended life and it all comes together with smooth and balanced performance even at high speeds. The 5/8” chuck with MT2 spindle taper gives you versatility with a variety of bits and features on-board chuck key storage, so you never have to hunt around for it. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. Base has predrilled holes for mounting onto a bench or work stand. Slotted table allows for mounting clamps and vises for effective mounting. The X-pattern laser locks-on to your drill points saving on guesswork and sparing expensive materials. A versatile and valuable tool for any shop especially when you expand its range of use with optional accessories such as mortising attachments, drum sanders, circle cutters, etc. Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. Remember when you could drill with laser precision? Remember WEN. DO NOT use power tools in the presence of flammable liquids or gases. Drill press Base -10 x 16 inches

• Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed.
• Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches
• Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III
• 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2"
• Includes drill press, mechanical variable speed, laser, table roller extension, 5/8" keyed chuck & key, tools for assembly.Drill press Height from the Floor to the top: 37 inch

User questions & answers

Question:	base size
Answer:	It is a lot like a car tire. Solid rubber
Question:	Does the drill press come pre-assembled? If not, how complicated is the assembly
Answer:	nope
Question:	it says 2/3HP how many amps does the motor say on its side 9 amps is 2/3HP what is on the side of the motor what watts or amps is the motor rated
Answer:	Definitely ok to use outside.
Question:	I see the spindle travel is 2" - 3 1/8" depending on model. What does the length in the name (8", 10" or 12") refer to
Answer:	Hello, Thank you for your question. The shelves are removable. Regards Ann

Product description

Remember when power tools were actually powerful? WEN’s 8-inch swing, 5-speed drill press is small but powerful enough to drill through metal, wood, plastics, and other materials. Max drill capacity is 1/2” in 1” thick cast iron. When you need accurate, repeatable holes, this tool will do the job more conveniently and precisely than a hand held drill. The perfect size for the shop and portable enough to take to the job. Constructed with a rigid frame consisting of cast iron: head, table, and base ensuring accurate holes. Its powerful induction motor features ball bearings for an extended life and it all comes together with smooth and balanced performance even at high speeds. The ½” chuck with JT33 spindle taper gives you versatility with a variety of bits. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. The base contains predrilled holes for mounting onto a bench or work stand. The slotted table allows for mounting clamps and vises for effective workholding. Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. Remember when you could drill holes in any material with ease? Remember WEN.

• Includes a 1/2-inch keyed chuck and onboard key storage
• Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
• Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations.Cord Length (ft.):6
• Durable 1/3 HP induction motor develops ample torque and power
• 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right
• Swing: 8 inch. Motor: 120V, 60Hz. Horsepower: 1/3 HP.

User questions & answers

Question:	ease of putting together
Answer:	It's really easy to put together. Just took me round 5-10 minutes.
Question:	What is the maximum width of material you are drilling (from drill center to hitting the pole
Answer:	i think the varied answers come from questions getting sent to people who have purchased different sizes. I noticed some of the reviews are also for other models. This item, the WEN 4208 has an 8-inch swing. So, you can drill the center of an 8- inch diameter object, or about 4- inches from drill center to body. The WEN 4210 & the WEN 4212 have 10- inch swings. Anyone trying to drill the center of a 9- inch wheel would need one of these models. This 4208 is a Great drill for the money. i like that the head can be swung over the edge of a work bench, which allows for drilling into long stock. Like into the bottom center of a 36" post. The beveling work table is another great feature & one i did not have on the press this will replace. If you have the space, consider the WEN 4214 with 12-Inch swing. it is still small enough to be bench top, but you can drill the center of 12- inch/ bowls & table tops.
Question:	Can you rotate the drill press on this unit 90 degrees, so that it hangs off the edge of the workbench, to drill into the ends of longer pieces of stock
Answer:	Yes you can, just be careful when ever you do this.
Question:	does it drill round holes
Answer:	I only drill square holes with mine.

Product features

Powerful. Versatile. Compact.

Remember when power tools were actually powerful? WEN’s 8-inch 5-Speed Drill Press is compact enough to limit space on your work bench but powerful enough to drill through metal, wood, plastics, and more. Drill up to a 1/2-inch hole in heavy-duty cast iron. Its powerful induction motor features ball bearing construction for an extended life, providing smooth and balanced performance even at high speeds. The 1/2-inch JT33 chuck gives you versatility with a variety of bits while the worktable bevels up to 45° left and right. Constructed with a rigid frame and a cast iron head, table, and base, ensure accurate holes and convenient drilling operations every time. Remember when you could drill holes in any material with ease? Remember WEN.

Locking Depth Adjustment

Set the depth adjustment knobs to limit your spindle travel for accurate and repeatable drilling operations.

Beveling Worktable

Bevel the worktable 45° left and right for precisely angled holes.

Onboard Key Storage

Place your chuck key on the attached key storage to make sure it is alway there when you need it.

1/2-inch Keyed Chuck

The JT33 chuck accepts drill bits up to a 1/2-inch in size to meet the needs of a variety of projects.

Product description

If you want to set up a drilling station in a tiny room, or add a small, dedicated drill press to a crowded shop, this is the machine for you. Compact and light weight with an 8" swing and 5 spindle speeds this drill press will help you get the job done, whether you're a weekend hobbyist working out of your apartment or a full-fledged craftsperson running a production shop. Made in an ISO 9001 factory

User questions & answers

Question:	What is the Quill travel
Answer:	You mean how far down I can go? If so, 2"
Question:	Can I use a masonry bit to drill holes into bricks using this Drill Press
Answer:	Minimum rpm on the G0925 is 740 rpms. Boring up to 1/2” diameter in soft brick max rpm is 700. Masonry bits 1/2” and smaller cut more efficiently at approximately 500 to 700 rpm. Lower speeds equate to cleaner holes and extended bit life.
Question:	Country of origin
Answer:	This machine is manufactured in China.
Question:	what is the overall height ? looking for one to put on a flip table
Answer:	Fully assembled, I measured 23.5 Height * 15 depth * 9 width

Product description

Drill straight holes all the time! With the DrillMate you can drill straight or angled holes, drill on the edge of a board or even round stock. The drive shank attaches to your 3/8" Or 1/2" power drill while the keyed output chuck works with most 3/8" drill accessories. The all-metal construction DrillMate provides the precision of a drill press with the ease of a hand drill. Smooth operation and controlled drilling via spring and bearings prevent cutting tool from hitting work piece. Adjustable depth-stop makes repetitive drilling to any depth with near drill press precision. The metal base has a scale with easy to read angles, v-grooves for centering of round materials, and holes for permanent mounting for special fixture applications. Also includes auxiliary handle for controlled movement and rubber feet that give the base a nonslip option.

• Perfect for straight or angled drilling, drilling on the edge of a board or on round stock
• Attaches to all 3/8" And 1/2" Power drills and it also includes a 3/8" Capacity chuck with key
• Angle cuts of 45 Degree to 90 degrees, with a built in angle read out in the all metal base
• Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter
• Adjustable depth stop and spring action control of the head

User questions & answers

Question:	What's the max depth of cut
Answer:	As answered you can get a copy of the manual from Grizzly or from Amazon.http://cdn0.grizzly.com/manuals/w1668_m.pdfandhttp://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000041994.pdfThey are not identical (40 pages on the Grizzly website, and 27 on the Amazon page).On difference is the depth stop. On the Grizzly site it is a jam nut on the depth stop rodon the left side, on the Amazon it is set on a collar lock knob on the spindle on the right side.My drill press has both depth stops, but the spindle does not have the depth label, and is notmentioned in the manual that came with the drill. When using the oscillating sander feature itcould be damaged if either stop is set.
Question:	Does it use Bearings or Bushings for the spindle
Answer:	I'd been wondering this myself... The Stock part on my W1668 is not a belt, but rather a polyurethane o-ring. The closest analogue I could find was here: http://www.amazon.com/dp/B0051Y2LSO/ref=biss_dp_t_asn If you want true OEM parts, you can call Woodstock international at (360) 734-3482 7AM-5PM PST/PDT M-F
Question:	Does anybody know how many inches the stroke is? Thank you
Answer:	Yes. Page 14 of the manual supplied with the drill press says, "The drill chuck is seated to the spindle with a JT-33 tapered surface and a screw."
Question:	What's the diameter of the opening in the base
Answer:	Also..it's a GREAT drill press!

Product features

Milescraft DrillMate

With the Milescraft DrillMate portable drill stand, you can drill straight holes, angled holes, on the edge of a board or even round stock. Everyone knows that the success of many DIY projects depends on drilling straight and accurate holes. Now you can add a whole new level of accuracy with this drill guide jig when drilling holes with your standard hand drill.

All Metal Head

Head is all metal construction that has a hex shank chucks to 3/8" and 1/2" drills. Easy glide bushing in the head, eliminate play and wobble, for precise drilling.

Adjustable Angle Settings

Angle readout for setting drilling angles to 45°, 60°, 75°, and 90°

V-groove

Metal base and three v-grooves for drilling on round stock.

TPE Feet

Non-slip TPE feet prevent slipping and marring on the work surface, that can be removed to mount with screws when needed.

Large Handle

Can be mounted in a fixed position on the base for maximum support no matter what drilling motion you are doing.

Depth Stop

Adjustable depth stop for repetitive drilling.

3/8" Keyed Chuck

Compatible with most 3/8” drill accessories and includes chuck key, which can be store in the TPE feet holes.

Product description

This mini drill press with 6-Speed ranges. You can drill precise holes with this product and it is great for small and precise work. It is easier to use and more accurate than hand-held drills. It is useful for jewelers, woodworkers, mechanics, hobbyists, home, workshop, arts and crafts.

Features:

Infinite speed selection within the machine\'s six speed ranges(0-2800r/min).

Aluminum alloy base.

Gear drive without belt design, power strong.

Power-off switch for added safety.

Can be widely used model, wood boards, aluminum, composite panels, resin panels, thin metal, circuit boards, precision machining of hard materials and other non-specific drilling. This is hardware processing, mold making, document binding, electronic manufacturers, scientific experiments and other units of the ideal tool.

Specifications:

Plug: US (optional)



Spindle Speed: 0-2800r/min

Drill Clamping Diameter: 1-13mm / 0.04-0.51in

Input Power: 710W

Spindle Travel: 60mm / 2.36in

Voltage: 110-220V, 50-60Hz

Drill Capacity: Woods: Ï30mm

Iron: Ï8mm

Working Radius: 110mm / 4.33in

Material: aluminum alloy

Item Weight: 6000g / 12.22b

Package Weight: 6100g / 12.36lb

Package Size: 480 * 290 * 150mm / 18.90 * 11.42 * 5.91in

Note:

Please allow 10-30mm error due to manual measurement and make sure you do not mind before ordering.

The color of the actual items may slightly vary from the above images due to different computer screen, thanks for your understanding.

Package List:

1 * Bench Drill

1 * English Manual

• Can be widely used model, wood boards, plastic sheeting, aluminum, composite panels, resin panels, thin metal, circuit boards, precision machining of hard materials and other non-specific drilling.
• Is hardware processing, mold making, document binding, electronic manufacturers, scientific experiments and other units of the ideal tool.
• This mini drill press with 6-Speed ranges. You can drill precise holes with this product and it is great for small and precise work. It is easier to use and more accurate than hand-held drills. It is useful for jewelers, woodworkers, mechanics, hobbyists, home, workshop, arts and crafts.
• Infinite speed selection within the machine\'s six speed ranges(0-2800r/min).
• Aluminum alloy base.

User questions & answers

Question:	How many Amps
Answer:	710 Watts at 220 Volts (710 / 220) = 3.22 Amps
Question:	The description says the voltage is 110-220v and 50-60hz.. but my unit's faceplate says 220v 50hz. Will damage happen at 110v 60hz
Answer:	No risk of damage. However it will only run in the very top "range" and then only at less that half speed. The motor is NOT designed to be run on US standard 110 Volt 60 Hz power.
Question:	Does this have a reverse function
Answer:	NO , The machine donot have a reverse function !
Question:	Does it have a half inch chuck
Answer:	Drill Clamping Diameter: 1-13mm / 0.04-0.51in Drill Capacity: Woods: Ï30mm Iron: Ï8mm Working Radius: 110mm / 4.33in

• Motor: 1/2 HP, 110V, 5A
• Overall height: Bench model: 31-1/2"
• Overall height: Bench model: 31-1/2"
• Number of speeds: 5
• Drill chuck: 5/8"

User questions & answers

Question:	No work light
Answer:	The difference between e6 Soft and 2019 e6 would be 1) Construction: e6 Soft is 3-piece, whereas 2019 e6 is 2-piece 2) Compression: 2019 e6 is softer than the e6 Soft, which will reduce more spin off the tee The new e12 Soft would be the closest model to the e6 Soft, but if you want soft feeling off the tee, we recommend you to try the 2019 e6. Thank you,
Question:	Why is press so noisy, can it be adjusted
Answer:	yes, the new e12 Contact will be available on 2/26. We still sell the current e12 Soft and Speed until the new product is launched.
Question:	Quill travel distance
Answer:	Yes that is correct. Made in Covington, GA. Thank you for reaching out and we hope you enjoy our new e12 product!
Question:	does this have to be bolted to the floor or can it be used as a free standing unit
Answer:	The box of these balls state they are made in Japan

Product features

Shop Fox W1669 1/2 HP 34-inch Bench-Top Radial Drill Press

The Radial Drill Press is one of the most versatile and handy drill presses you can add to your shop. Between the tilt of the head and the tilt of the table, you can drill any angle necessary. You can also use it as a horizontal boring machine. Add to this an incredible swing which allows you to bore to the center of a workpiece that is 34-inches wide and you have one of the best values available in a drill press.

Horizontal Sliding Headstock

This drill press offers the ability to drill wide workpieces up to 34-inches diameter, you can slide the headstock in and out to increase the distance between the drill chuck and the column up to 17-inches.

Tilting Headstock

You can also tilt the headstock from 45-degrees clockwise to 90-degrees counterclockwise for drilling angled holes or for horizontal boring machine use.

Repeat Operations

Using the slide and tilt features, you can drill a line of straight or angled holes without the need to reposition your workpiece after drilling each hole.

Tilting Table

The W1669 features a precision ground cast iron table that features adjustable tilt from 90-degrees both left and right. The table can be adjusted for height and angle making this an extremely versatile machine capable of many applications.

Safety Switch

This drill press also features a safety paddle switch which provides a greater degree of safety over other types of 110 volts on/off switches due to its oversize paddle and removable lock-out key. No more fumbling around to locate the off button. Simply slap the paddle down to switch off power.

Product description

Shop Fox offers a broad assortment of drill presses to suit every need—from small hobby shops to professional machine shops. Our unique oscillating models provide the convenience of two machines in half the space, and Our Radial drill presses offer unmatched versatility. For the best selection of features, performance, and value, Look no further than Shop Fox.

• Motor: 3/4 HP, 110-Volt, 1,725 RPM, Spindle Speeds 250-3050 RPM
• Drill chuck: 5/8-Inch
• Spindle travel: 3-1/4-Inch
• Swing: 13-1/4-Inch
• Includes a 3-piece spindle sander drum kit with a mandrel and 80 grit sanding paper to fit the 1-Inch, 1-1/2-Inch and 2-Inch drums.

User questions & answers

Question:	Where can I get a manual for this drill press
Answer:	It depends on the model.
Question:	Trying to find a replacement belt for the oscillating sander portion (X1668061), anyone know where to find these online
Answer:	Yes, this is the upper dish rack for your model.
Question:	Is this a jt33 Taper Chuck, anyon eknow, i want to geta keyless for it
Answer:	Check the serial # of your dishwasher on the GE site, then type in the result here on Amazon to find the appropriate part.
Question:	Can I get this model drill press without damage
Answer:	No, this GE WD28X10369 Upper Dish Rack Assembly is not compatible. The correct GE Upper Dish Rack Assembly for your model is part# WD28X10410.

Product features

SHOP FOX W1668 3/4 HP Bench-Top Oscillating Drill Press

Just like its little brother, this 12-speed drill press doubles as an oscillating sander that can be used for efficient contour sanding. With more speeds, more power and more capacity this machine becomes an effective tool for heavier use. The table has a clearance hole for use while sanding. This clever design incorporates a dust collection port so your sanding jobs are less messy. With a 3/4-inch drilling capacity in steel you'll be able to tackle most any drilling job as well.

Tilting Table for Versatility of Applications

The W1668 offers the ability to tilt the table 90-degrees to both the left and right. You can adjust the table height and tilt to accommodate for workpiece height or achieve special drilling or sanding angles. You can also move the table out of the way and use the drill press base as a table for drilling or sanding.

Oscillating Feature for Sanding Operation

One of the great features of the W1668 13-1/4-inch Oscillating Drill Press is its sanding capability. The drill press can be converted from drilling operations to sanding operations in a matter of seconds with just a few tool-free steps. Oscillation reduces heat build up and leaves a smooth finish when sanding.

Compact Bench-top Design

This drill press is designed for bench top use freeing valuable floor space.

Product description

Shop Fox offers a broad assortment of drill presses to suit every need - from small hobby shops up to professional machine shops. Our unique oscillating models afford two-machine convenience in half the space and our radial drill presses offer unmatched versatility. For the best selection of features, performance and value, look no further than Shop Fox.

• Overall height: 23"
• Spindle travel: 1-5/8"
• Drill chuck: 1/64" - 1/2"
• Dust port size: 2"
• Swing: 8-1/2"

User questions & answers

Question:	Can it cut metal or steel if it can what thickness
Answer:	None that I know of. There were no drill bits in the one I received.
Question:	Can the center support column be replaced with a longer unit, don't see that as a oiption, any ideas
Answer:	Select 'Commercial Sales' as the shipper and this will be shipped out Today.
Question:	Can you drill a 1" hole through a 2x4 and 4x4 on low rpm with out stalling
Answer:	It is not variable speed. You need to set the speed depending what material you're working with. Setting the speed is very easy, and only takes a few seconds. Just need to move the belt, which is easily accessed on the top. I have never owned or operated a drill press with variable speed. Speed needs to be set.
Question:	What size is the base
Answer:	Metal

Product features

Shop Fox W1667 Bench-Top Drill Press, 8-1/2-inch

This bench-top oscillating drill press is a compact machine that can conveniently serve as either a drill press or an oscillating sander and is capable of a wide variety of drilling and sanding operations.

Some key features include a 1/2-horsepower motor along with a 1/2-inch drill chuck and a removable safety key to help prevent unwanted starts.

Oscillating Spindle

This drill press features a precision-ground sanding spindle that can be used with sanding drums between 1 and 2 inches in diameter and up to 4-1/4 inches long. The spindle oscillates, resulting in a better finish and longer-lasting abrasives.

Safety switch

The W1667 features a paddle switch to provide a greater degree of safety over other types of switches due to its oversize paddle and removable lock-out key. No more fumbling around to locate the off button. Simply slap the paddle down to switch off power.

Depth scale

The Shop Fox drill press comes fitted with a depth stop that allows drilling holes at a preset depth. Use the easy-to-read depth scale to locate your desired depth.

Tilting Table

A 7 inches x 7 inches square tilting table allows you to sand surfaces at different angles, while table inserts provide extra support for your work piece.

Dust Port

The machine is also equipped with a 2-1/4-inch dust port that can be connected to a dust collection system to help keep your workshop clean.

Spindle Sander Drum Kit (Sold Separately)

The optional D2677 Drum Sander Set includes three rubber sanding drums 4-1/4 inches in length to accommodate 1 inch, 1-1/2 inches and 2 inches diameter sanding sleeves. This kit also includes one 80 grit sleeve for each drum to get things started.

Product description

This easy-to-use benchtop drill press is very small, but powerful enough to use for all of your drilling projects. With a platform measuring only 6-3/4" x 6-3/4", it is space-saving as well as economical. Variable speeds up to 8,500 RPM. 1-year warranty.

• Ideal for all drilling projects, not just the small ones
• 1-year manufacturer warranty
• Variable speed up to 8,500 RPM
• Measures 6-3/4 inches by 6-3/4 inches; 13.00 pounds
• Easy-to-use tiny benchtop drill press is space-saving and economical

User questions & answers

Question:	I'm looking to buy a drill press so that I can mill out my polymer 80 AR receiver, would this be able to get the job done
Answer:	Sorry, I don't know what an 80 AR receiver is. I use my drill press to drill holes in seeds for lei and it works perfect.
Question:	Where do replacement drive belts come from? This isn't a standard type belt
Answer:	Replacement belt parts for the Euro Tool (DRL-300.00) Bench-Top Drill Press are provided by Euro Tool. Type this ASIN: B00A97XFA6 into the search bar of Amazon.com and hit search to be directed to the listing page where you can view and purchase this replacement part. Please keep in mind this is not a standard type belt drive and will be difficult to replace outside of purchasing a Euro Tool replacement product.
Question:	Can it drill into 80% forged T6 aerospace aluminum using good cobalt bits? Holes will not be larger than 1/4 inch in diameter
Answer:	I don't see why this drill press wouldn't work for your project. This drill press is designed for slower drilling. The type of drill bits have a lot to do with it also, but I would day that this drill press will work.
Question:	Will this hold a half millimeter drill bit
Answer:	Hey Jim sorry Im not good with metrics but it does hold a 9/32 drill bit.Also to my knowledge they do make large bits with this small diameter end.and I found a nifty conversion sight http://mdmetric.com/tech/cvtcht.htm 0.2813 inch to 7.14502mm I hope this helps Im also going to see if I am able to change the drill head to a biger size so I dont have to find special bits.

Product description

With extremely high rotational accuracy and optimal power transmission via belt drive for three different speeds. The unit offers a high quality machined work table of ribbed die-cast aluminum (work table size 8 1/2" x 4 3/4" (220 x 120mm)) providing an adjustable parallel fence with scale. The solid, hard-chromed steel column is 11" high (280mm) and has a diameter of 4/5" (20mm). The powerful motor, which is built into the super stable die-cast head of the machine, runs very quiet and has a long life expectancy. The power transmission by 3-step aluminum pulleys and flat belt provides 3 spindle speeds of 1,800, 4,700 and 8,500rpm allowing triple torque at lower speeds. The chrome feed lever has a practical adjustable drilling depth gauge. The spindle is essentially free of play as a result of the three high quality ball bearing assemblies. It is recessed for the insertion of MICROMOT steel collets, but also threaded for attaching drill chucks with 3/8" thread. The spindle has an extremely high rotational accuracy and a 1 3/16" (30mm) feed. The quill diameter is 1 1/4" (32mm) with return spring, the throat depth (column to drill spindle) is 5 1/2" (140mm). The unit provides quick coarse height adjustment of the headstock via clamp lever. The max. height (worktable surface to spindle end) is 5 1/2" 140mm). Technical data: 110 - 120V, 60Hz, 85W (0.115hp), speeds 1,800/ 4,700/8,500rpm. The unit comes with six triple slit MICROMOT precision steel collets in sizes 1/32", 1/16", 5/64", 3/32", 7/64" and 1/8" (1.0, 1.5, 2.0, 2.4, 3.0 and 3.2mm). To clamp work pieces we recommend using either one of our machine vises or the X-Y table KT 70 to convert this machine into a high-precision machining center.

From the Manufacturer

Proxxon Bench Drill Press TBM 115 - This 3 speed drill press excels at drilling micro holes down to 1/64 inch (0.5 millimeters). The unit offers a high quality machined work table of ribbed die cast aluminum, 8-1/2 inch x 4-3/4 inch in side. It provides an adjustable parallel fence with scale. The solid high chrome steel column is 11 inches high and is 4/5 inch in diameter. The powerful motor is built into the super stable die cast head of the machine, runs very quietlyand has a long life expectancy. The power transmission by 3 step aluminum pulley and flat belt provides 3 spindle speeds of 1800, 4700, 8500 rpm. This allows triple torque and lower speeds. The chrome feed lever has a practical adjustable drilling depth gauge. The spindle is free of play because of the 3 high quality ball bearing assemblies. Spindle is recessed for the insertion of Micromot steel collets but also threaded for attaching drill chucks with 3/8 inch thread. The spindle has an extremely high rotational accuracy and a 1-3/16 inch (30 millimeter) feed. The quill diameter is 1-1/4 inch with return spring; the throat depth column to spindle is 5-1/2 inches. The unit provides quick coarse adjustment of the headstock via the clamp lever. Maximum height work table to spindle is 5-1/2 inches.

• Package Dimensions: 14 L x 9 H x 10 W (inches)
• Package Weight : 17 pounds
• Country of Origin : Luxembourg
• Competent drilling of micro holes down to 1/64".

User questions & answers

Question:	My question is What's the advantage of using collets vs a chuck( item
Answer:	Well the collets make a stronger hold on the drill bit. But there is an optional chuck if you like that. I use a chuck myself.
Question:	Does anyone know the part number for the replacment drive belt on Amazon
Answer:	Just found the schematic on google, part # 28 128-02 = Drive belt. Call Proxxon and verify just in case.
Question:	Is the proxxon 38128 tbm available with a 220v option
Answer:	I have one in stock. 28128 Drill Press TBM 220v.
Question:	Is there a better machine vise compatible with this drill press
Answer:	Maybe, the Proxxon 24260 Precision Machine Vise for MF 70, you'll have to find out if it fits this drill press.

• 3 Variable speeds per minute: I:0-8000r/min, II: 0-11000r/min, III:0-16000r/min.
• Clamp Diameter:1-10 mm; Drilling Diameter: 0.6-6.5 mm / 0.02-0.2 6inch.
• Great speed,Mainly used for wood, plastic plate, a resin plate, aluminum, composite panels and another non-hard material drilling. Can also be used for DIY furniture, work easily, drilling holes more accurately.
• High quality drilling, easy operation, good stability. With speed regulating switch, speed can be adjusted easily.
• Great speed, low noise, long life drilling no swing, drill breakage rate is very low, high efficiency.（If you have any questions after purchase, please contact us to solve it for you.）

User questions & answers

Question:	This is a true 120v motor? not the 220v model i see on amazon that advertises it works also on 120v
Answer:	yes, my understanding is that there is an adapter available through Pioneer to make it wifi.
Question:	Where does this product ship from? Thank you
Answer:	Yes they can. I have B wired into a speaker select switch and I can select between my outside speakers or my speakers in the kitchen.
Question:	How straight and stable is the chuck? Is there much runout with a typical drill bit
Answer:	Hello Julie, the VSX-834 is a seven channel receiver, meaning it can support and operate up to 7 speakers at a time. If you wish to operate all nine speakers at the same time, you will need a separate amplifier connected to the ZONE B Line Out (this will mirror the one set of speakers connected to the SPEAKER B terminals). - MM
Question:	Does this turn both forward and in reverse
Answer:	Hello Magnumtripod, this can be the result of the settings or the source material. Please contact our technical support line to go over your settings to verify what may be causing your issue. - MM

Product features

EWANYO 340W 3-Speed Mini Drill Press Bench

• 3 Variable speeds per minute: I:0-8000r/min, II: 0-11000r/min, III:0-16000r/min.
• Clamp Diameter:1-10 mm; Drilling Diameter: 0.6-6.5 mm / 0.02-0.2 6inch.
• Great speed, low noise, long life drilling no swing, drill breakage rate is very low, high efficiency.
• High quality drilling, easy operation, good stability. With speed regulating switch, speed can be adjusted easily.
• Great speed,Mainly used for wood, plastic plate, a resin plate, aluminum, composite panels and another non-hard material drilling. Can also be used for DIY furniture, work easily, drilling holes more accurately.

Package Included:

1 x Electrical Machinery

1 x Drill Chuck

2 x Hex Key

2 x Accessory

• 【Material】Electric drill press stand constructed with aluminum ally base,solid column bar,durable to use.
• 【Available Drill】Designed for use with electric drills with collar diameter of 38-43mm (1.7"or 1.5"),with black plastic ring for better fix.
• 【Drill Depth】Drilling depth up to 60mm(2.4"), single hole for mounting.
• 【Features】This drill stand is ideal for holding your drill steady during use and allows for much more precise drilling than hand-held operation.
• 【You will Get】: The package includes 1 x Base, 1 x Column bar, 1 x Rocker, 1 x Lower limit Fixed sleeve, 2 x Adjustable plastic fixed sleeves, 1 x Hex wrench 5mm

User questions & answers

Question:	Can i use a battery powered drill with this
Answer:	Yes it should, mine did come with a remote. I do not have steering wheel controls so i velcroed mine to steering wheel , works great lol.
Question:	How is the carriage locked into position on the column
Answer:	I don't have Spotify premium and therefore was disappointed to find out it doesn't work without it. Does anyone know a way to play any music out of the smart phone through bluetooth on this receiver? Even if it has to be mp3's saved on this phone's SD storage card.
Question:	what kind of drill is compatible to this? please post a sample link. my drills dont fit
Answer:	If the HDMI (audio and video) are passing through the receiver, then you will not be able to watch unless the unit is on.
Question:	Hi. I purchased one of these drill stands but did not receive the sleeve that holds the drill in place. Where can I get one of these
Answer:	Zone 2 can be HDMI, speaker wire or an analog signal (RCA). There are no digital audio outputs.

Product features

Features

Drill Stand for Hand Drill

• This is a new adjustable drill stand, perfect for shop or home use.Designed for use with power drills with collar diameter of 43mm or 38mm（1.7'' or 1.48''）.Drilling depth up to 60mm(2.4''), has 2 holes for mounting.It has a solid column bar and sturdy base with slots for fitting a machine vice.

Features

• This Plunge Drill Stand is ideal for holding your drill steady during use and allows for much more accurate drilling than hand-held operation.The vise is durable and lightweight, and it is a very portable tool.

Drill Depth

• Drilling depth up to 60mm(2.4"), single hole for mounting.Pack of 1 set drill press stand per parcel.Need to assemble.Not including the electric drill

Application

• This is a new adjustable drill stand, perfect for shop or home use.It has a solid column bar and sturdy base with slots for fitting a machine vice, exercises stable during use.

Product description

Description:

This quality mini bench drill is sturdy and very durable, high hardness, corrosion resistant and rust-proof. This mini drilling machine works efficiently and accurately. Widely applied to drill iron, wood, plastic plate, aluminum, composite panels, etc.

 

Features:

Adopts metal material and surface paint treatment, strong and durable, corrosion resistant and not easy to rust.

High quality, easy to operate with great speed, low noise, good stability and high efficiency.

Precision and tightness can be adjusted easily through a knob according to different demands.

Mainly used for wood, plastic plate, a resin plate, aluminum, composite panels and another non-hard material drilling.

Can also be used for DIY furniture, work easily and accurately, achieving any drilling effect you desire, very practical.

 

Specifications:

Condition: 100% Brand New

Material: Metal

Input Power: 710W

Drill clamp diameter:1-13mm

No-load Speed: 0-2800r/min

Spindle Travel: 60mm/2.36in

Drill Capacity(Diameter): Wood: 30mm/1.18in, Iron: 8mm/0.31in

WorkingRadius?130mm

Clolumn size?32*25*400mm

working size?185*175mm

Product Size(W*L*H): 170*200*495mm/6.69*7.87*19.49in

Weight: Approx. 5400g

 

Package Included:

1 * Bench Drill Stand

Other Accessories

• Infinite speed selection within the machine\'s six speed ranges(0-2800r/min).
• High quality, easy to operate with great speed, low noise, good stability and high efficiency.
• Adopts metal material and surface paint treatment, strong and durable, corrosion resistant and not easy to rust.
• Precision and tightness can be adjusted easily through a knob according to different demands.
• MainlyMainly used for wood, plastic plate, a resin plate, aluminum, composite panels and another non-hard material drilling. Can also be used for DIY furniture, work easily and accurately, achieving any drilling effect you desire, very practical.

User questions & answers

Question:	This is a true 120v motor? not the 220v model i see on amazon that advertises it works also on 120v? 60Hz is ok
Answer:	If used with the proper bit, it should, But I use it for metals and thick plastics, so I have no experience with it in stone.

Product description

Milescraft 1097 ToolStand - Drill Press Stand (compatible with Dremel)

From the Manufacturer

Use most rotary tools as a small scale precision drill press. Rack and pinion gearing allows smooth controlled plunge. Scale with depth stop allows depth control and precise repeatability. Sturdy cast aluminum base provides sturdy work area. Stong 13.5 inch metal tube allows drilling of objects up to 5 inches in height. Lock rotary tool in horizontal position for hands free sanding or polishing.

• Sturdy metal head fits most Dremel style rotary tools
• Spring loaded metal rack and pinion gearing for smoothe controlled drilling
• Scale with depth stop allows precised depth control and repeatability
• The steel 13-1/2″ support column of the ToolStand, fits securely into a 6″ x 6″ formed steel base plate whose surface and mounting platforms have been planed to ensure a level work surface
• Lock tools in horizontal position for hands free use

User questions & answers

Question:	I would like to get the Milwaukee m12 tool as the batteries will be useable with other tools. would this work
Answer:	If the M12 does not have a removable chuck cover then I would say no. I believe we had to remove the chuck and then insert the tool then retighten the chuck for the press to operate properly.
Question:	Can the telescopic adjustment mechanism be locked on the shaft for hands-free drilling? I need to have both hands on the work piece
Answer:	yes
Question:	Does the tool change angle under pressure? I have the dremel press, and as you put pressure on the bit, it tends to angle some. Breaks bits
Answer:	In my opinion it does move some. However if at all possible a snap centering punch will give your bit a chance of being able to drill instead of breaking. Might want to check that your bit is tapered at the right angle, if not it will walk all over the place which will cause the bit to break, my opinion. Hope this is some help.
Question:	Does it work with Wen rotary tools such as the 2300 series
Answer:	The tool holding mechanism is very poorly made. I think the assumption they make with the new collett nut that holds the tool in place is that you have a Dremel tool . . . and a later model at that. Universal it isn't! I would look for something made expressly for the Wen

Product features

Milescraft 1097 Tool Stand

Assured Stability and Precision

The Metal Head of the Tool stand holds the Drilling machine in place with utmost firmness ensuring perfectly cut holes. The tool stand gives you the freedom of working on a simultaneous project as the tool stand replaces the hand held operation of the Drill. The Milescraft 1097 Tool Stand is compatible with almost all Dremel-style Rotary tools.

Spring loaded Metal track for controlled drilling

To the ensure absolute control and flawless movement of the drill, The Milescraft 1097 Tool Stand comes with a spring-loaded rack and pinion gearing. For rigorous and continuous cut, the tool stand has an Integral depth stop that can be locked.

Designed to give you ease while working

The Support column of the The Milescraft 1097 column is designed to attach easily to base plate. The cord clip attached to the column ensure you work your way out of your project with ease. The base of the tool stand can be easily detached from the column and cen be kept separately and attached when needed. The feet of the base is made of rubber so that the tools stands in one place while you work.