12 best lisle impact wrenches

Product description

Mortorq Bit Set, 5pc. Is for removing & installing MORTORQ Fasteners found on Chrysler, GM, Jeep, & other models.

• The fasteners are used in a variety of applications including bell housings, interior components, door frames, body components and more
• Sockets are made of heat-treated alloy steel
• Includes sizes MTS-0, MTS-1, MTS-2, MTS-3 and MTS-4
• Use with 3/8" square drive
• Includes vinyl holder for storage

User questions & answers

Question:	Has anyone used these on a 4l60e bellhousing? i was told to buy the snap-on mts-4, but for how often i use it, it's hard to justify the price vs these
Answer:	We use the Mortorq bitts to remove Jeep, Chrysler seat bolts . These bolts are threadlocked and so far the Lisle bits haven't shattered. So i recommend them, especially at the price compared to one Snap on bit.
Question:	Are these made in the USA
Answer:	I know Lisle is an American Co. but I didn't pay attention to the packing, and the tools are not marked individually. I doubt they are made in the USA, but I can't say I know for certain, sorry.

Product description

Quickly removes and installs fan clutch when repairing the water pump or fan clutch. Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary. Set includes 7 driving wrenches that fit Ford, GM, Chrysler & Jeep. Set now includes 7/8", 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6. 0L and 6. 4L Power stroke diesel pickup. 1-7/8"and 2" are still included in the set. Use with an air hammer. Includes blow molded storage case.

• Quickly removes and installs fan clutch when repairing the water pump or fan clutch.
• Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary.
• Set includes 7 driving wrenches that fit Ford, GM, Chrysler & Jeep. Set now includes 7/8", 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6. 0L and 6. 4L Power stroke diesel pickup. 1-7/8"and 2" are still included in the set. 1-1/2" 41mm and 42mm are still available individually.
• Use with an air hammer. Includes blow molded storage case.

User questions & answers

Question:	Does this wrench fit a 2000 Dakota
Answer:	Yes that is what I use it on
Question:	Can I buy the part that fits into the air hammer seperetely
Answer:	I used this brand - Husqvarna 610000155 50:1 XP 2-Cycle Oil 1-Gallon Mix, 2.6-Ounce. Put one 2.6 oz bottle of oil to 1 gallon of gasoline. So you should have a separate gas container for your mixed gas/oil to use. You con't have to buy Husqvarna brand but it should be 2-Cycle Oil for chain saws or weed eaters.
Question:	Does it come in a blow molded case
Answer:	I own this saw and run a 24" bar. I use it to cut 5 cords of firewood each summer. As long as the chain is sharp, it does great.
Question:	does this work on gm vortec engines
Answer:	When I just looked, it's 419 and 439, with the more expensive one being an 18" bar and the less expensive being the 20" bar. Weird. Or did you just want to know what 419-409=?

Product features

Lisle 43300 Pneumatic Fan Clutch Wrench

Quickly removes and installs fan clutch when repairing the water pump or fan clutch. Faster and easier. No holding wrench is necessary. Set includes 7 driving wrenches that fit Ford, GM, Chrysler & Jeep. Set now includes 7/8", 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6.0L and 6.4L Powerstroke diesel pickup. 1-7/8"and 2" are still included in the set. 1-1/2" 41mm and 42mm are still available individually. Use with an air hammer. Includes blow molded storage case.

Product description

Works where an Impact Wrench Won't Fit.

• The right angle design gives the technician access to hard-to-reach bolts
• Works great on harmonic balancer bolts, transmission bolts, cam bolts and others where an impact wrench won't reach
• The tool will both loosen and tighten.
• Use with an air hammer and the 43370 Driving Wrench, which can be purchased individually or used from our 43300 Pneumatic Fan Clutch Wrench Set, 1/2" breaker bar and 1/2" impact sockets.

Product description

Hand Impact Tool's unique design delivers over 200 feet lbs. of inches shock torque inches. Can be reversed to tighten. Can also be used with impact sockets 1/2 inches square drive. Included in 30200 hand impact tool set.

• Loosens rusted, frozen nuts, bolts and screws
• 1/2 inch square drive
• Unique design delivers over 200 feet lbs. of inches shock torque inches
• Can be reversed to tighten
• Included in 30200 hand impact tool set

Product description

8 Piece, Tap Socket Set, For Use In Restricted Areas & Is Ideal For Use In Areas Where A T-Handle Won't Fit, Fits All Number & Fractional M.C.T.I. Standard Taps Thru 1/2", Also Fits 1/8" NPT Taps & Metric Taps Thru 12mm Manufactured To M.C.T.I. Standards, Sockets Contained On A Vinyl Holder, Made Of Heat Treated Alloy Steel. This product is highly durable. This product is made in USA.

• For Use in Restricted Areas. Ideal for use in areas where a T handle won't fit. Set of 8 sockets fits all number and fractional M. C. T. I. standard taps thru 1/2". Also fits 1/8" NPT taps and metric taps thru 12mm manufactured to M. C. T. I. standards. Sockets contained on a vinyl holder.
• Ideal for use in areas where a T handle won't fit.
• Set of 8 sockets fits all number and fractional M. C. T. I. standard taps thru 1/2".
• Also fits 1/8" NPT taps and metric taps thru 12mm manufactured to M. C. T. I. standards.
• Sockets contained on a vinyl holder.
• Ideal for use in areas where a T handle won't fit
• Set of 8 sockets fits all number and fractional M.C.T.I. standard taps thru 1/2 inch

User questions & answers

Question:	Are these now made in China
Answer:	I've had a set for four yrs., which was made in the U.S., but more recent sets may be coming in from China. Lisle used to make everything here, but alas, things change. It would be best to contact Lisle directly for the current COO (Country Of Origin) for production details.
Question:	what size is the driver 3/8" or
Answer:	The first 4 sizes (smaller) are 1/4" drive, and the bigger 4 are 3/8"
Question:	Will any of these fit an M14x1.25 tap
Answer:	For the most part metric taps will have an American Standard shaft and drive square on the back. I just checked and I do not have a 14 mm but I have a 12. The shank is 3/8 (.375) and the square is 9/32's (.281) and it fits fine in my #6, I've bought the entire set through 11. A 14mm, guessing should fit in a #7 or 8 but the set your showing in #9-11. If your tap is American made they are made to accommodate American tools, my 2 Japanese made 12mm were smaller in these areas and of metric size. I will say this about these drivers, when you need them NOTHING else will do but 980% of the time a regular Tap handle will do.
Question:	In the details, it says made in china. It also say made in United States. where are they made
Answer:	The set I have says made in China. It is a really good set in spite of that.

Product features

Lisle 70500 Tap Socket Set

Ideal for use in areas where a T handle won't fit. Set of 8 sockets fits all number and fractional M.C.T.I. standard taps thru 1/2". Also fits 1/8" NPT taps and metric taps thru 12mm manufactured to M.C.T.I. standards. Sockets contained on a vinyl holder.

In Use

In Use

In Use

Product description

Loosens Rusted, Frozen Nuts, Bolts and Screws.

Unique design delivers over 200 ft. lbs. of "Shock Torque." Can be reversed to tighten. Can also be used with impact sockets! 3/8" sq. drive with 3/8" drive bit holder; #1, #2, #3, #4 Phillips, and 3/8" straight slot bits.

• Loosens Rusted, Frozen Nuts, Bolts and Screws.
• Unique design delivers over 200 ft. lbs. of "Shock Torque."
• Can be reversed to tighten
• Can also be used with impact sockets! 3/8" sq. drive with 3/8" drive bit holder; #1, #2, #3, #4 Phillips, and 3/8" straight slot bits

User questions & answers

Question:	Lisle has two models 3/8" and 1/2" impact driver, does the bits from the 3/8" impact driver fit on the 1/2" impact driver
Answer:	Unless you don them incorrectly (pulled down to the hips), these will absolutely NOT provide adequate coverage for someone with a 36" inseam. These chaps are only 36" total length, from top of waist to bottom of leg...returned mine for the larger size (41" overall length).
Question:	Do I need a tank of compressed air and a hose that will fit this tool in order to use it
Answer:	Common sense here. Yes these will be warm or perhaps even hot when it's 100+ but so are carhart work jeans on those days. What to do? First do your cutting before 10 am in August or after 7 PM. Gather up gear and supplies the day before so when you step up to the tree or logs for firewood you are a Go! Drink Gatorade to hydrate and get those electrolytes. Take breaks often, drink, sharpen that chain. Think about this ...no one thinks they will have a chainsaw misstep. Lastly costs of these chaps vs all the loss on multiple levels if there was a mishap. Then you can enjoy the fire on that February morning with a nice cup of Joe and warm memories.
Question:	I just bought this one and it came without instructions. How do you reverse the direction of the driver
Answer:	A Chainsaw Is one of the most dangerous tools invented by man ! Any level of protection is far better than none ! I hope I never have to find out if these chaps will stop a 14 horsepower 38 inch Husqvarna monster ! I almost got my guts ripped out by a little 16 inch poulan during a voilent kickback ! They are U/L ANSI CL OSHA certified ! Cant hurt ???
Question:	I guess this impact driver won't accept 1/4 inch bits? Would I need a 3/8 in. square x 1/4 in. hex impact adaptor like the one Milwaukee Tools makes
Answer:	I find the 12 Gauge Hornady Zombie Max (Certified Zombie Ammo) to be far more effective than letting them within biting distance.

Product features

Lisle 29200 3/8" Hand Impact Tool Set

Unique design delivers over 200 ft. lbs. of "Shock Torque." Can be reversed to tighten. Can also be used with impact sockets! 3/8" sq. drive with 3/8" drive bit holder.

Product description

For External Torx Bolts.

• 26280 includes 10 sizes, E5 through E20
• The four smaller sizes are 1/4" drive; the next four sizes are 3/8" drive, the two largest sizes are 1/2" drive
• Made of heat-treated alloy steel
• Sockets are kept in a convenient vinyl holder
• Made in USA

User questions & answers

Question:	I'm going to show some ignorance here, please be patient. don't i need the male bit for these? and if so which do i purchase
Answer:	You need 1/4, 3/8, 1/2'' drive ratchets on these sockets, they fit Torx head bolts. otherwise you need 27200 Torx bit set for the female heads.
Question:	The product description says both made in united states and china. which is it
Answer:	My information states that the LIS26750 is made in the USA, as are 98% of the Lisle line.
Question:	What is the OD for the E8? Working in tight spot
Answer:	Ratchet end is 1/2" and the other end is 7/16"
Question:	what are the actual socket sizes, one at a time please
Answer:	The sizes are 5,6,7,8,10,12,14,16,18,20. And of course, those are NOT millimeters, just Torx numbers.

Product description

Long Pneumatic Driving Handle.

• Use with an air hammer
• Quickly removes and installs fan clutch when repairing the water pump or fan clutch
• Faster and easier than conventional fan clutch wrenches; no holding wrench is necessary
• For more information check the main Lisle tool- 43300
• Replacement part for Lisle tool- 43300

User questions & answers

Question:	The picture is not what I am looking for but the description is. I just want to make sure I am getting the handle for the air fan clutch tool
Answer:	Yes, and it works beautifully. I fought those fan clutch nuts for hours before finding out about this tool. Now it takes longer to set the tool up than it takes to break the clutch nut loose (about 30 seconds to set up, maybe five seconds to break it loose). It is worth every penny in saved frustration alone.

Product description

This Heavy-Duty Impact Socket is Designed with More Than Three Times the Standard Socket Mass to Direct More Energy to Removing the Bolt.

• Can be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications
• Made with heat-treated, impact quality alloy steel; Use with 1/2" drive

User questions & answers

Question:	Will this work with my kobalt corded impact gun
Answer:	I am not sure of your impact gun’s torque rating, mine is rated at 650 ft pounds. I have seen videos of people using this socket with cordless impact guns and it worked for them. So I would think that it would, just can’t say for certain that it will. Hope this helps.
Question:	Will this socket fit through the center of the holding tool? Just in case I need to use both at once
Answer:	Don't know have never needed to use both. This socket will take off crank bolts on honda with almost any 1/2 air impact. This is a must have tool for Honda timing belts. Has never failed to remove bolt for me using my old beat up ingersoll 231c.
Question:	Engine turns clockwise (when looking at the nut.) It should never be turned counter-cw. This will drive engine counter-cw if bolt is too tight
Answer:	Usually this tool is used when replacing a Honda timing belt. Once you install the new belt (after aligning all the timing marks), you can ONLY turn the crankshaft counter-clockwise. Turning it by hand clockwise WILL result in the timing belt jumping teeth. Once you are sure timing is correct you tighten the pulley bolt to the required lb/ft.
Question:	Can this socket be used with a big breaker bar to get the job done? Or is impact wrench required
Answer:	The socket will fit the bolt and the breaker bar will fit the socket but there is no way you can hold the crankshaft from turning if you use this socket with the breaker bar. In order to use a breaker bar you must install the crankshaft holding tool that has a hole through the center to put a deep socket through to the crankshaft bolt. This socket is way too thick walled and will not go through the center of the holding tool. This socket on an impact gun, works without the using a crankshaft holding tool and it works real good.

Product features

Lisle 77080 19 mm Harmonic Balancer Socket for Honda

This Heavy-Duty Impact Socket is Designed with the Standard Socket Mass to Direct More Energy to Removing the Bolt.

Can be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications. Made with heat-treated, impact quality alloy steel. Use with 1/2" drive.

Product description

Lisle magnetic socket hold has 22 compartments made especially for impact sockets. It holds sockets up to 1" or 20mm. The tray has rubber feet to keep it from scratching your tool box.

• Organizes 1/2" chrome and impact sockets for easy storage
• Features 22 socket compartments for both standard and deep sockets
• Made of ABS plastic for durability
• Open sign for easy identification of sockets
• Magnets hold sockets in tray and the tray has rubber feet to protect tool box from scratching

User questions & answers

Question:	Where is this tool made
Answer:	This tool would probably destroy any 1/4 in bit. That being said if you got an adapter it would work.
Question:	Is there a difference between the different colored holders other than the colors
Answer:	Despite what Amazon fitment helper says, yes it does! Works perfectly on my 2000 Durango R/T 5.9L Magnum!
Question:	Are the slots big enough to hold impact sockets
Answer:	If you are talking about the long bar, Amazon has it (Lisle # 43370) but the set was a better deal since the bar is $44.00 by itself.
Question:	If you hold vertically/shake lightly, will big sockets fall out
Answer:	Yes tool comes in a blow molded case.

Product features

Lisle 40900 Red 1/2" Magnetic Socket Holder

Organizes 1/2" Chrome and Impact Sockets. Twenty-two socket compartments allow you to keep your 1/2" standard and deep sockets in one convenient holder.

Description

Holds sockets up to 1" or 20mm. Design of holders leaves sockets exposed for easy identification. Powerful magnet holds sockets in tray. Rubber feet protect tool box from scratching. Made of strong ABS plastic. Made especially for impact socket sets.

Product description

36mm Low Profile Filter Socket. Removes and Installs Filters on 6 Liter Ford Diesel Pickups. Works on 2017 - 2020 Duramax Fuel Filters.

• Low profile oil and fuel filter canister sockets
• 6 point 35/36mm sockets for use on oil and fuel filter canisters when replacing the lament
• Use with 3/8" drive
• For more information check the main Lisle tool- 13300 or 13650
• Replacement part for Lisle tool- 13300 or 13650
• 36mm Low Profile Filter Socket. Removes and Installs Filters on 6 Liter Ford Diesel Pickups. Works on 2017 - 2020 Duramax Fuel Filters.
• The low profile socket fits both the 35mm and 36mm fuel and oil filters. The low profile socket works in confined spaces. 3/8" drive. Not for use with an impact wrench.
• Fit type: Vehicle Specific

User questions & answers

Question:	Are these made in USA
Answer:	The Lisle part number 43370 Handle Assembly is the replacement handle for Lisle 43300 Pneumatic Fan Clutch Wrench Set and Lisle 43500 90 Degree 1/2 Inch Driving Wrench. We have plenty in stock this morning. Amazon is showing the wrong image for this item; it is not the same image that ToolSource has for this product.ShariToolSource Product Manager
Question:	Is this the special wrench needed for the oil change on a 1999 bmw 323i coupe. Arthere any other 'special' wrenches needed to do my own oil change
Answer:	Yes the flat blade and Phillips bits are interchangeable between the 3/8" and 1/2" versions of this tool. The parts that wouldn't be interchangeable are the driver sockets and the drivers themselves. Mike who answered on Oct 18th is incorrect.
Question:	why is it listed as 35/36, how can it be both, or are the that close
Answer:	no air compressor needed, it is a hand tool.
Question:	Is this made of metal or a really hard rubber material
Answer:	rotate to the direction you want til snug then hammer

Product features

Lisle 13270 7 PC FILTER SOCKET SET

Contains 7 of the Most Popular Size Filter Canister Sockets to Work on Many Applications.

Contains very low profile, 6 point 24mm, 25mm, 27mm, 28mm, 29mm, 32mm and 36mm sockets for use on oil and fuel filter canisters when replacing the element. Use with 3/8" drive.

Lisle 13270 7 PC FILTER SOCKET SET

Contains 7 of the Most Popular Size Filter Canister Sockets to Work on Many Applications.

Contains very low profile, 6 point 24mm, 25mm, 27mm, 28mm, 29mm, 32mm and 36mm sockets for use on oil and fuel filter canisters when replacing the element. Use with 3/8" drive.

Lisle 13270 7 PC FILTER SOCKET SET

Contains 7 of the Most Popular Size Filter Canister Sockets to Work on Many Applications.

Contains very low profile, 6 point 24mm, 25mm, 27mm, 28mm, 29mm, 32mm and 36mm sockets for use on oil and fuel filter canisters when replacing the element. Use with 3/8" drive.

Lisle 13270 7 PC FILTER SOCKET SET

Contains 7 of the Most Popular Size Filter Canister Sockets to Work on Many Applications.

Contains very low profile, 6 point 24mm, 25mm, 27mm, 28mm, 29mm, 32mm and 36mm sockets for use on oil and fuel filter canisters when replacing the element. Use with 3/8" drive.

Product description

The pipe stretcher kit stretches pipe up to 4-1/4 inches including stainless steel. Use with an impact wrench to quickly stretch pipes. Collet sets expand pipes from 1-5/8 inches to 4-1/4 inches. The tool can be used on the vehicle. The pipe stretcher kit is a convenient, inexpensive alternative to hydraulic pipe expanders.

• Stretches Pipe up to 4-1/4" Including Stainless Steel.
• Use with an impact wrench to quickly stretch pipes.
• Collet sets expand pipes from 1-5/8" to 4-1/4".
• The tool can be used on the vehicle.

User questions & answers

Question:	Is this 1 5/8 I'd or od .I work in a small engine shop and work with small exhuast pipes
Answer:	Usa
Question:	diys one of the comment one guy said heating up exhaust pipe help to the job easy, by doing that, expander have rubber o rings
Answer:	NO they are the same I use Green for Metric Red for Sae makes it very nice ther are 3 different sizes of each for 1/2",3/8", and 1/4" so if your like me you will need one of each size in each color to organize all your sockets
Question:	Will this work with thick-wall aluminum pipes
Answer:	I have HF 3/8 impacts in mine and it works fine. Just know you cannot fit 1/2" sockets in in the 3/8 holder and the 1/2 holder only holds 22 sockets (no where near enough for most people)
Question:	the quality of the hex head (wear resistance) from constance use with impact wrench
Answer:	If mine stands vertical the large deep sockets fall out. If I shake it most of the deep sockets fall out and the larger standard sockets fall out.

Product features

Lisle 17350 Pipe Stretcher Kit

Use with an impact wrench to quickly stretch pipes. Collet sets expand pipes from 1-5/8" to 4-1/4". The tool can be used on the vehicle. The pipe stretcher kit is a convenient, inexpensive alternative to hydraulic pipe expanders. Comes in a molded storage case.