14 best porter cable right angle drills

Product description

M12 3/8 RAD DRILL TOOL ONLY. The product is easy to use. The product is durable. The product is manufactured in China.

From the Manufacturer

With a head size of only 3.75 inches, the 2415-20 M12 cordless 3/8-inch right angle drill driver delivers 100 inch-pounds of torque in a compact, lightweight design. The first sub-compact right angle drill driver with a spindle lock chuck, the 2415-20 is the most versatile right angle drill/driver in the industry. Built-in electronics include an electronic clutch, fuel gauge, speed control and overload protection. Includes: 2415-20 right angle drill driver (tool only).

• The product is easy to use
• The product is durable
• The product is manufactured in China
• Features 3/8-inch single-sleeve ratcheting chuck for maximum versatility and grip
• An extended paddle switch allows for controlled use in multiple positions
• Electronic clutch with 11 settings plus drill mode for complete control
• Built-in LEDs illuminate the work surface and indicates when clutch is out
• The on-board fuel gauge displays remaining run-time on the M12 lithium-ion battery pack

User questions & answers

Question:	Does it have enough speed/power to drill broken bolts
Answer:	With 60-minite auto shut-off function of non use.
Question:	Is that a metal sleeve on the chuck like the other M12 drills
Answer:	Yes，Its worldwide dual voltage is 100V-240V.Very convenient for travaling.Just buy the $5 conveter plug which takes the US plug straight and changes it into the round ones. No electricity changes.
Question:	Just received my drill works great ,it has two(2) led lights but only one lights up, is this normal or should both leds light up? thanks
Answer:	It's easy to curl you hair,you can see some online videos which teach you to style your hair, you can do it!
Question:	Is this right angle food for using brush attachments for carpet and upholstery in vehicles
Answer:	Yes，you can use it in anywhere

Product description

The PORTER CABLE PCC761B 20v MAX Lithium Bare Cut Off/Grinder features a high-performance motor that produces 8,500 rpm for aggressive cutting, removal and finishing. The cast metal gear housing helps disapait heat during extended use and a spindle lock that allows for quick and easy wheel changes. Wheel diameter: 4-1/2". The handle is contoured and overmolded for optimal increased comfort, along with a 3-position side handle that helps to provide control in multiple positions. A tool free guard makes guard adjustments quick and easy. This tool is part of the 20V Max System - a high performance cordless platform. (This is a bare tool item - battery sold separately).

• High-Performance Motor produces 8,500 rpm
• Cast metal gear housing
• Spindle lock for quick and easy wheel changes
• 3-Position Side Handle
• Part of the 20V Max System

User questions & answers

Question:	What brushes does this grinder take? One of mine broke
Answer:	Brushes are not replaceable in this grinder.
Question:	does it come with any cutting wheel or grinding wheel? Thanks in advance
Answer:	Yes one cut off and two grinding wheels
Question:	does it come with battery and charger
Answer:	No battery or charger included. Take a look at my photo of everything in the box....happens to be the first one.
Question:	what is arbor size
Answer:	The spindle is 5/8x11 threaded...The back flange and threaded clamp nut which attach to the threaded spindle accommodate discs with a 7/8" hole...So 5/8x11 screw on discs or ones with a 7/8 hole can be used...

Product features

20V MAX* Cordless Cut Off/Grinder

• High-Performance Motor produces 8,500 rpm for aggressive cutting, removal and finishing
• Cast metal gear housing helps dissipate heat during extended use
• Contoured Overmolded Handle optimized for increased comfort
• Spindle lock allows for quick and easy wheel changes
• 3-Position Side Handle provides control in multiple positions
• Tool Free Guard makes guard adjustments quick and easy
• 20V Max System - High performance cordless platform

Product description

●Specification:

● Material: ABS + Aluminum + Steel

● Type: 90°Drill Attachment

● Color: Black

● Diameter of Hex Shank: 8mm / 0.31"

● Jaw Chuck Range (Diameter): 0.8-10mm

● Max. Speed: 1500 RPM

● Max.Torque: 25N·m



▲Features:

● 10mm keyless chuck, accept 0.8-10mm drill bits.

● Apply aluminum and tool steel, strong & durable.

● Right angle drill attachment can run forwards or in reverse.

● Make electric drill power swerve 90°for hard-reached places.

● Simple to install and operate, with a handle for stable usage.

● 8mm hex shank makes it suitable for almost all standard drills.

• ▲Max. 1500RPM and 25N·m torque. heavy duty steel material.
• ▲8MM HEX SHANK - suitable for most standard drills like hand/power drills, electric drill, buffing attachments etc.
• ▲90 DEGREE - It can make drill power swerve 90°and get to hard-reached places.
• ▲10MM KEYLESS CHUCK - The tool's chuck accepts standard 0.8mm-10mm drill bits.
• ▲24MM LENGTH HANDLE - simple to install and operate, with a handle for stable usage.

User questions & answers

Question:	What is the length from the tip of the chuck to the bottom of the right angle
Answer:	About 6 inches
Question:	What is the diameter of body where the hex connector is
Answer:	1.1 inch
Question:	How narrow of a space will the tool fit in to drill a hole? (Width from end of chuck to end of shaft
Answer:	About 6 inches in. Unless you have a really short drill bit, you need a minimum of 4 inches clearance from the angle to the point you are drilling.
Question:	What is the diameter of body where the hex connector is
Answer:	The diameter of the unit where the hex shaft enters is 1.1 inch. That is also the diameter of the body that holds the chuck. The hex shaft is 0.31 inch from flat to flat of the hex.

Product description

The PORTER CABLE PCCK604L2 20V MAX 2-Tool Cordless Drill/Driver and Impact Driver Combo Kit has everything you need for drilling and impact driving. The 1/2 in. 2-speed drill driver is compact at 8-1/4 in. long and weighs 3-1/2 lbs. The 1/4 in. impact driver is also compact at 6-9/10 in. long with a weight of 3-1/3 lbs. Both have ergonomic handles, LED lights and bit storage.

• 1/2 inch two speed drill/driver. High performance motor delivers 283 Units Watts Out and 0-350/0-1,500 RPM.
• Compact design 8.25 inch long and 3.5 lbs. Drill features an ergonomic handle design, LED light and bit storage
• 1/4 inch impact driver delivers 1450 in/lbs of torque, 0-2,800 RPM and 0-3,100 BPM. Quick load chuck for one handed bit changes.
• Compact design 6.9" long and 3.3 lbs.Impact driver features an ergonomic handle, LED light and bit storage
• 20V MAX 1.3 Ah lithium ion batteries included. Professional grade batteries deliver more runtime and are lighter weight than traditional NiCd batteries

User questions & answers

Question:	Does the drill have clutch settings
Answer:	Yes Low and high torque and 24 postition slip clutch.
Question:	Whats the difference between pcck604l2 and pcck602l
Answer:	What comes in the box is the difference. For inatance one might come with a hard case and the other may come with a carry bag
Question:	does the drill have led lights
Answer:	Yes it does. There is a small LED light on both the drill and the impact driver.
Question:	is the drill 1/2 chuck size
Answer:	Yes it is 1/2 inch chuck size

Product features

PCC601 1/2" Compact Drill/Driver

Features a high-performance motor that delivers 1,500-RPM and an LED to help illuminate low-light or dark areas.

PCC641 1/4" Hex Impact Driver

Features a high-performance impact mechanism that produces 2,800-RPM, 3,100-BPM and 1,450-in-lbs of max torque for optimum power on a variety of applications. Its LED helps to illuminate low-light or dark work areas.

Two PCC681L 20V MAX* Batteries

Interchangeable with all the tools in this kit.

• 🎉【SOLVE DEAE ENDS】 The right angle drill adapter can remove the screws in the dead cornerand slot.
• 📐【PERFECT DESIGN】 Small size 105° right angle drill adapter is more suitable for use innarrow space than 90 ° right angle drill.
• ☛【WIDELY USED】 It is suitable for wood industry, computer maintenance, automobile maintenance. Right angle drill adapter can be used with extension flexible shaft bits and driver socket adapter .
• 🎊【BETTER MATERIAL】 The 105° right angle drill adapter is made of chrome vanadium alloy steel, which makes the right drill adapter more durable and wear-resistant. You really don't want to try it?
• 🙈【MORE STABLE】 The built-in strong magnet has good clamping force and can accommodate standard hexagonal drill bit and driving drill bit to avoid falling. This kind of right angle drill adapter is easy to use.

Product features

FEATURES

⓵ Right angle drill adapter was made of chromium vanadium alloy steel. Built-in strong magnetism make the screwdriver bits not easy to fall off.

⓶ 1/4 inch hex shank can be quickly changed for screwdriver bits, drill chuck, etc.

⓷ It can rotate 360° seamlessly and bidirectionally, and adopt 105 angle design to solve the problem in narrow space much more effectively.

⓸ High hardness angle drill bit holder, anti rust. The long 105° right angle drill adapter are mounted in a die cast with 3 durable ball bearings.

⓹ Suitable for wood industry, computer maintenance, automobile maintenance and so on. Long 105° right angle drill adapter can cooperate with cordless drill, electric screwdriver, socket wrench, ratchet, etc.

High Torque Precision Adjustment

The expansion angle is 105 degrees, which is used in hard to reach places.

360 degree adjustable thumb flange. It can be connected with a hand drill and a hand wrench.

And can be used with a rechargeable screwdriver or electric drill.

The maximum torque of this 105 degree driver adapter is 15N.

which is only applicable to right angle head.

Not Easy to Fall Off

Strong magnet is built into the head of hexagonal hole. Which can firmly hold the bit head.

The connection strength is large and it is not easy to fall off.

The internal screws of corresponding specifications are used for assembly and disassembly.

The super stability and grip of hexagonal hole is especially.

Suitable for operation in narrow environment. And it can rotate freely in reverse direction.

Increased Friction Makes It Easier to Rotate

The appearance adopts non-slip pattern design, it is not easy to hurt hands and easy to rotate when rotating. And it can increase the friction between the hand and the handle, so that it is easier to maintain vertical to the workpiece, and it is easier to force the installation of the crutches. And you don’t have to worry about slippery hands after long time use.

Stable Electric Drill to Reduce Slipping

The standard 1 / 4-inch hexagonal handle is convenient for drilling rig handle to firmly grasp.

The adapter and prevent slipping between the drill handle and the adapter.

It is more stable and safe than other four angle handles.

Make the adapter more secure in all power tools.

Especially suitable for locking. And quick chuck replacement.

Furniture Decoration

If your desk or stool needs to be repaired or installed, you must be upset by the operation in the corner.

You are very lucky now! Our products just can solve your problem.

Handle any corner of your furniture corner.

No longer need to worry about the inconvenience of operation!

Fixed Installation of Shelf

In many warehouses, cargo terminals sometimes need to repair the shelves.

Our products can be handled to the corners that cannot be reached by general equipment.

which is precise and meticulous.

Can repair your shelf in time, so as to reduce the loss of goods.

Automobile Equipment Repair

Of course, our products are also widely used in automobile repair.

Only our products can meet this requirement.

In this kind of occasions requiring precise operation.

Ensure the safety and efficiency of automobile equipment.

Product description

The PORTER-CABLE PCCB122C2 Dual Port Charger Bag features compact 20V Max batteries and a removable Dual Port charger with a USB port. The bag has the ability to store up to 10 batteries or 2 tools. It comes with a divider section to keep charged and uncharged batteries separate. The Dual Port charger will fully charge 2 batteries simultaneously in just 40 minutes. Backed by a PORTER-CABLE 3 year limited warranty. Includes: PCC681L 20v MAX* Batteries, Removable Dual-Port Charger, Storage Bag.

• Simultaneous dual-port charger charges 2 batteries at the same time
• 40 minutes charge time
• Capacity to store up to 10 batteries or 2 tools
• 1.3 Ah batteries included
• Includes a USB port

User questions & answers

Question:	Does it charge 6.0 amp batteries
Answer:	This has a V blade. Be aware sveral people have had problems with the screws falling out.
Question:	Do these batteries work with a PCC
Answer:	Dear friend Doing so may have hidden dangers. Playing while charging is doing repeated charging and discharging, which will cause great damage to the materials in the battery. It is recommended that you can wait until the power bank is fully charged before charging the phone.
Question:	Is this a "quick" charger
Answer:	Yes, the Galaxy J3 2 times up.
Question:	Do you offer the bag only without the batteries and charger
Answer:	Hello, this battery Charges iPhone 11 more than 3 times completely. You can try it, if any problem, please contact us as soon as possible. ^-^

Product description

The PORTER CABLE PCC710B 20v MAX Lithium Bare Oscillating Tool 11 pc Set features a 2 Finger TOOL-FREE SYSTEM makes adjusting and changing accessories quick and easy. A variable speed dial (8K-18K OPM) offers maximum control across a variety of applications. It has an integrated LED work light which provides better visability in darkened work conditions and a 3 position overmold grip which improves comfort by reducing vibration. With 11 accessories ncluded, this set provides the ability to cut, sand, scrape and grind all in one tool. This tool is part of the 20V Max System - a high performance cordless platform. Part of the 20V Max System - High performance cordless platform. (This is a bare tool item - battery sold separately).

• 2 Finger TOOL-FREE SYSTEM makes adjusting and changing accessories quick and easy
• LED work light
• 11 Accessories Included; Part of the 20V Max System
• 1 Nonstandard Battery battery required

User questions & answers

Question:	it says "non standard battery required" will the 20v bat from a PC drill driver fit
Answer:	It would be able to use a 20v Lithium Ion Battery branded by PORTER-CABLE
Question:	Can someone please identify sanding pads that fit this properly, and are sold without holes, in individual grits (not sets), at an affordable price
Answer:	that would be the k911bj
Question:	Can you sand furniture with this tool or is it more of a cutting tool
Answer:	Yelp...Sand away!..Great for small projects and getting in corners.
Question:	Im redoing picket fence and would want to know if this is good for taking white paint off the fence. The rigid scraper can handle the project
Answer:	Yes you could remove the paint from your picket fence with this tool, you could also cut your lawn with scissors. If you start both project at the same time your lawn time your lawn would be done first.

Product description

The DEWALT DCK940D2 20V MAX Lithium Ion 9-Tool Combo Kit contains all the tools you need for any/all projects. The DCD771 20V MAX Lithium Ion 1/2" Compact Drill Driver delivers 300 unit watts out (UWO) of power ability completing a wide range of applications. The DCF885 20V MAX Lithium Ion 1/4" impact driver features 3 LED lights with 20 second delay to provide visibility without shadows. The DCS381 20V MAX Lithium Ion Reciprocating Saw with keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft, and the DCS393 20V MAX Lithium Ion Circular Saw with 6-1/2" carbide blade can cut 2x4's at a 45deg angle in a single pass. The DCS355 20V MAX Lithium Ion Oscillating tool QUICK-CHANGE Accessory System allows blades and attachments to be changed quickly without wrenches. The DCL040 20V MAX Lithium Ion LED work light delivers 110 lumens of light output. The DCG412 20V MAX Lithium Ion 4-1/2" Grinder 7,000 RPM motor provides high power for cutting and grinding applications. The DCR006 20V MAX Bluetooth Jobsite Speaker allows you to stream music wirelessless from your smart phone or tablet, and finally, the DCD740 20V MAX Lithium Ion 3/8"" Right Angle Drill provides dual speed ranges (0-650/0-2000) rpm for increased user flexibility for a wide range of applications. Includes: 1) DCD771 Drill/Driver, 1) DCF885 1/4" Impact Driver, 1) DCS381 Recip Saw, 1) DCS393 Circ Saw, 1) DCS355 Oscillating Tool, 1) DCL040 LED Worklight, 1) DCG412 Grinder, 1) DCR006 Bluetooth Speaker, 1) Right Angle Drill, 2) DCB203 20v MAX XR Batteries (2.0AH), charger, 6-1/2" Saw Blade, Side Handle (DCG412), Wrench (DCG412), Universal Accessory Adapter.

• DCD771 20 volt MAX 1/2 inches drill driver and DCF885 20 volt MAX impact driver
• DCS381 20 volt MAX Lith recip saw, and DCS393 20 volt MAX Lith circular saw
• DCS355 20 volt MAX Lith oscillating tool, and DCL040 20 volt MAX Lith LED work light
• DCG412 20 volt MAX Lith 4 1/2 inches grinder, DCR006 20 volt MAX Lith Bluetooth speaker, and DCD740 20 volt MAX Lith 3/8 inches right angle drill
• Includes 2) DCB203 20 volt MAX XR batteries (2.0AH)

User questions & answers

Question:	What is in this combo pack exactly
Answer:
Question:	What size batteries are included? Can’t find the AH rating or model numbers in description
Answer:
Question:	Does these tools have brushless motors
Answer:	It wears off before noon! And it makes my face extremely oily. I have to reapply my foundation several times a day.
Question:	Does this come with the two bags pictured with it
Answer:	I don't think it firms the skin. I don't see any real difference when I use This product but everyone's skin is different. To me it's not worth the money.

Product features

20V MAX* 1/4" Impact Driver

Compact for fitting in tight spaces and increasing productivity. Three LED lights make it ideal for working in the dark.

20V MAX* Reciprocating Saw

Features a 4-position blade clamp that allows for flush cutting and increased positional versatility with tool free blade changes.

20V MAX* Circular Saw

6-1/2" carbide blade can cut 2x4's at a 45-degree angle in a single pass.

20V MAX* XR Oscillating Multi-Tool

A single tool solution for many applications, including cutting, sanding, scraping, and mortar and grout removal. This will become your go-to solution when you need to get the job done quickly and easily.

20V MAX* Compact Drill/Driver

Lightweight design with high performance motor that delivers 300 unit watts of power out.

20V MAX* Grinder

Has an 8,000 RPM motor that provides high power for cutting and grinding applications.

Jobsite Bluetooth Speaker

Allows you to stream music wirelessly from your smartphone or tablet.

20V MAX* 3/8" Right Angle Drill/Driver

Provides dual speed ranges to increase user flexibility for a wide range of applications.

Product description

The PORTER-CABLE PCCK619L8 20V Max 8-Tool Combo Kit provides the tools needed to get the job done. This kit consists of : 1/2" Drill/Driver, 1/4" Impact Driver, 6 1/2" Circular Saw, Reciprocating Tiger Saw, Jig Saw, Oscillating Multi-tool, Cutoff tool/grinder, and LED flashlight. The Drill features a high-performance motor and a two-speed gear box that delivers the power needed to complete tasks easily. The Impact driver offers 1450 in/lbs of torque, and 0-2,800 RPM, 0-3,100 BPM. The 6-1/2" Circular Saw has a high-performance motor that delivers 4000 RPM's for aggressive cutting, and a beveling shoe that pivots up to 50 degrees. The Reciprocating Saw delivers 1" stroke length and 0-3,000 SPM with a compact design allows tool to reach tight spaces and a tool free blade release. The Jig Saw features 3 orbital settings and a variable speed trigger (0-2,500 SPM). The Oscillating Multi-Tool also offers a variable speed dial (8K-18K OPM) along with a LED work light for better visibility. The Cutoff Tool operates on a high-performance motor that produces 8,500 rpm and has a 3-position side handle for easy of use. And finally, the Flashlight has a pivoting head with 4 LED bulbs that delivers 120 Lumens. Kit includes: PCC601 1/2" Drill Driver, PCC641 1/4" Impact Driver, PCC660 6 1/2" Circular Saw, PCC670 Reciprocating Tiger Saw, PCC650 Jig Saw, PCC710 Oscillating Multi-Tool, PCC761 Cutoff tool/grinder, PCC700 LED Flash light, PCC680 1.5Ah battery PCC685 4.0Ah battery PCC699L 1amp charger kit bags. Power Tool Type - Cordless

• PERFORMANCE: Delivers power to complete a wide range of jobsite applications.
• ERGONOMIC DESIGN: Lightweight tools designed to fit the users' needs.
• RELIABILITY: Tools backed by a 3 year limited warranty.
• INCLUDES: Drill Driver, Impact Driver, Circ Saw, Tiger Saw, Jig Saw, Multi-Tool, Grinder, Flash light, 2 Batteries, Charger, 2 Bags
• PART OF THE PORTER-CABLE 20V MAX* SYSTEM: Battery works with all Porter-Cable 20V MAX* lithium ion products.

User questions & answers

Question:	Has anybody else realized there are 9 tools pictured in the 8 Tool Combo set and I'm wondering what is pictured directly behind the circular saw
Answer:	There are 8 tools. What you are seeing is the handle for 6 1/2" Circular Saw. I have this kit and checked the count.
Question:	Will these tools work well on off grid homestead
Answer:	As long as you have a 110 volt source for recharging the batteries they would work fine. But being off the grid I don't know if you have a power source to run the charger?
Question:	Will the 5amp batteries work within kits charger and tools
Answer:	If you're referring to the aftermarket 5.0 amp hour batteries sold FOR the Porter Cable 20v Max system here on Amazon, the answer is YES. And they work great! I have bought 6 of those 5AH batteries here (I think the brand is "PowerExtra.") No looking back. One note on those batteries. If using the PC Rapid Charger.. Sometimes they will cause the charger to throw a "defective battery" flashing light when they're about 2/3 charged. The battery is fine. Just remove it from the charger for a few seconds, firmly reinsert it in the charger, and allow it to finish charging.These batteries last a really long time between chargeshttps://www.amazon.com/gp/product/B01KETUOPC/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Question:	i count 9 tools. what is the one behind the circular saw in the first picture, it looks like a sander
Answer:	Magnify the image on Amazon. It's eight tools and that one that looks like another tool is actually the battery charger.Btw.. I HIGHLY recommend this set of tools.. Have had a couple or several of every item in this 20v system for over two years.. Reliable, durable, and indispensable!One note.... Be sure to buy a few of the 4.0 amp hour batteries if you intend to do signif projects with these tools

Product features

PCC601 1/2" Drill Driver

Features a high-performance motor that delivers 1,500-RPM and an LED helps to illuminate low-light or dark areas.

PCC641 1/4" Hex Impact Driver

Features a high-performance impact mechanism that produces 2,800-RPM, 3,100-BPM and 1,450-in-lbs of max torque for power on a variety of applications. Its LED helps to illuminate low-light or dark work areas.

PCC650 Jig Saw

Features a variable-speed trigger that delivers 0-2,500-SPM and a 3/4-in stroke length for a variety of cutting applications.

PCC660 6 1/2" Circular Saw

Features a large cutting capacity up to 50° for efficient cutting.

PCC670 Reciprocating Tiger Saw

Delivers 3,000-SPM for fast cutting, and its tool-free blade clamp allows for quick and easy blade removal or insertion. Its compact design is ideal for cutting in tight spaces.

PCC700 LED Flash light

Helps to Illuminate dark work areas.

PCC710 Oscillating Multi-Tool

Features variable-speed that produces 8,000-18,000-OPM for optimum performance on a variety of applications. Its tool-free blade clamp, universal fitment and LED provide ease of use.

PCC761 Cutoff Tool/Grinder

Features a variable speed of 8,000-18,000-OPM and easily switches between cutting and grinding.

PCC680L 20V MAX* Lithium Ion 1.5Ah Battery

Interchangeable with all the tools in this kit.

PCC685L 20V MAX* Lithium Ion 4.0Ah Battery

Delivers power and runtime.

Two Kit Bags

Great for storing the tools that are included in this kit.

Product description

The PORTER-CABLE PCCCK616L4 20V MAX 4-Tool Combo Kit offers the perfect combination of a 1/2" 2-speed drill/driver, a 5-1/2" Circular Saw, a Compact Reciprocating Saw, and a LED work light. It also includes PCC681L 20V MAX 1.3Ah Lithium Ion Batteries to keep you ready and working with little or no down-time. The 2-speed drill/driver gives you the power needed to complete applications with ease (283 Unit Watts Out, 0-350/0-1500). Its lightweight and compact design reduces .users fatigue (8.25" long and 3.5 lbs.), and features ergonomic handle design, LED light and bit storage. The 5 1/2" circular saw delivers 3700 RPM for a variety of cutting applications, and includes a 5 1/2" 18T carbide blade. This saw features tool free depth adjustment and bevels at 45 and 90 degrees for specialty cuts. The compact reciprocating saw features 0-3000 SPM, 7/8" stroke length, tool free blade change and pivoting shoe. And finally, this kit includes a LED work light which helps to brighten your work area. Included: Drill/Driver, Circular Saw, Reciprocating Saw, LED light, PCC681L Lithium Ion Batteries, PCC699L 20V MAX Lithium Ion Charger, Kit Bag, 5 1/2" 18T Circular Saw Blade, 6" Wood cutting reciprocating saw blade.

• PERFORMANCE: High Performance motors and impact mechanisms to power through jobs
• ERGONOMIC DESIGN: Compact and convenient design to alleviate jobsite hassles
• RELIABILITY: Tools backed by a 3 year limited warranty
• INCLUDES: PCC601 Drill Driver, PCC661 Circle Saw, PCC671 Recip Saw, PCC701 Flashlight, 20V MAX* Lithium Ion Batteries, Charger
• PART OF THE PORTER-CABLE 20V MAX* SYSTEM: Battery works with all Porter-Cable 20V MAX* lithium ion products

User questions & answers

Question:	could you pass me the total weight of the kit
Answer:	Shipping weight is 16.3 lbs.
Question:	What is the return policy
Answer:	Return policy for what? Look at what ever item you are buying from Amazon. It is ususally listed some where.
Question:	Does this come with two batteries
Answer:	Yes it does,and unless you use it in a commercial app. it's more than enough.If used in commercial app..the buel batteries and charger will fit the bill, exhalant product, I'm a contractor
Question:	What is the difference between this combo set and the pcck 614L4 combo set
Answer:	The LED light is different. Also the circular saw in the 614L4 is a 6 1/2" cut instead of a 5 1/2" cut. Not sure of any other differences.

Product features

PCC601 1/2" Compact Drill/Driver

Features a high-performance motor that delivers 1,500-RPM and an LED helps to illuminate low-light or dark areas.

PCC661 Circular Saw

Features high-performance motor (3,700 RPM), 5-1/2-in 18-tooth carbide blade (2-1/8-in cutting capacity), and beveling shoe (50 degrees).

PCC671 Reciprocating Saw

Delivers 3,000-SPM for fast cutting, and its tool-free blade clamp allows for quick and easy blade removal or insertion. Its compact design is ideal for cutting in tight spaces.

PCC701 LED Flash light

Helps to illuminate dark work areas.

Two PCC681L 20V MAX* 1.3Ah Lithium Ion Batteries

Delivers power and runtime.

PCC699L Standard Charger

Charges the batteries for future use.

Kit Bag

Great for storing the tools that are included in this kit.

Product description

The Porter cable PCCK619L2 20V 2-Tool Brushless Combo kit features a Pcck607 20V Brushless drill/driver, along with a Pcck647 20V Brushless impact driver. Brushless motors provides 50% more run time. The 1/2-in drill/driver contains powerful motor with 370 UWO of power for heavy-duty applications with minimal stall, and its two-speed transmission has 450/1, 800 RPM for speed of drilling and fastening applications. Mode collar allows you to switch from drilling to fastening mode without losing your clutch setting. The 1/4-in impact driver motor provides 1, 400 in-lbs. of torque for large fastening applications, with a transmission that provides 2, 700 max RPMs for speed of fastening applications. 1/4" Quick Change hex for one handed Quick and easy bit changes. These two tools offer a compact size ideal for work in tight spaces and lightweight for reduced user fatigue. Backed by Porter CABLE'S 2 year limited warranty. Includes: 1) Pcck607 Brushless drill/driver, 1) Pcck647 Brushless impact driver, 2) 1.5Ah batteries, 1) charger.

• Brushless motor provides 50% more run time
• Pcck607 1/2" drill/driver contains powerful motor with 370 UWO of power for heavy-duty applications with minimal stall
• Drill/driver has a two-speed transmission with 450/1, 800 RPM
• Pcck647 1/4" impact driver transmission provides 1, 400 in-lbs. of torque for large fastening applications
• Impact driver transmission provides 2, 700 max RPM's

User questions & answers

Question:	Why has the price skyrocketed by that much
Answer:	Demand and tariffs
Question:	Which is the best battery for these? I want to buy some extras for this set
Answer:	I use the smaller batteries. I have extras so there is always one on the charger. Bonus is that they weigh a bit less so if you really are using it to the battery life in one sitting it wont be so fatiguing. Check around as sometimes its cheaper to buy additional tools with batteries then you have an extra tool and an extra battery.
Question:	What is chuck size of impact drill
Answer:	1/4 inch hex impact driver—- basic home use.
Question:	Is the impact driver strong enough to remove lawn mower blades from a commercial mower
Answer:	Most likely WILL NOT break the bolt loose. I use these often doing commercial appliance installations and kiosk relocations. About 5 pounds of constant pressure is the most I would push them.

Product features

PORTER-CABLE 20V MAX Cordless Drill Combo Kit

This 20V MAX Brushless Compact Cordless Drill/Impact Driver 2-Tool Combo Kit delivers extended runtime with its high-efficiency motor. The 2-speed transmission provides the right speed for any fastening or drilling task. At just 8 in. and 3.2 lbs., you can work all day with this Drill/Driver. The Impact Driver also features a brushless motor for up to 50% more runtime, and it produces 1400 in.-lbs. torque for driving large fasteners with a max speed of 2700 RPM.

FEATURES

• Drill brushless motor provides 360 MWO for heavy and fast applications
• Drill high performance two speed transmission with RPM's of 0-430 and 0-1700 for speed of fastening
• Drill compact size of 8" for work in tight areas
• Impact Driver provides 1400 in-lbs torque for driving large fasteners
• Impact Driver max RPM's of 2700 for speed of fastening
• Impact Driver compact (5.8") and lightweight design (2.9 lbs) for ease of use
• Pro grade lithium ion batteries for maximum performance included
• Lithium Ion Charger

Product description

The PORTER-CABLE PCCK617L6 20V MAX Lithium Ion 6-Tool Combo Kit features a 1/2" Drill/Driver that offers 283 Units Watts Out, two speed gear box (0-350/0-1,500), compact design (8.25" long/3.5 lbs), 1/2" chuck, with a built in LED light. The 1/4" Hex Impact Driver provides 1,450 in-lbs torque at 2,900 max RPM's and 3,000 BPM and is equipped with a quick release chuck. The Circular Saw features high-performance motor (3,700 RPM's), 5-1/2" 18 tooth carbide blade ( 2-1/8' cutting capacity) and beveling shoe (50 degrees). The Reciprocating Saw features high performace drivetrain (7/8" stroke length and 3,000 SPM), tool free blade release, variable-speed. The kit also includes a Tool-Free Oscillating tool with variable speed performs at 18,000 oscillations per minute for sanding, cutting and scraping. And finally, this kit contains a compact pivoting Flashlight for hands free lighting. The USB charging device is capable of charging 2 small compatible electronic devices simultaneously for convenient charging anywhere. Common applications include Drilling Wood, Drilling Metal, Driving Screws, Cross , Wood and Metal Demolition, Sanding, Cutting and Scraping, Portable Charging, Hand Free Portable Lighting Kit contains: PCC601 Drill/Driver, PCC641 Impact Driver, PCC661 Circular Saw, PCC671 Reciprocating Saw, PCC710 Oscillating Tool, PCC701 Flashalight, PCC698L USB Charging Device, PCC682L 2.0Ah Lithium Batteries, PCC699L Cup Charger, Standard Large Kit Bag, Screw driving Double Ended Bit, 5 1/2" 18 Tooth Carbide Blade, 6" Wood Cutting Recip Blade, Wood/Metal Cutting Blade, (10) Pieces of Sanding Paper, Sanding Platen, Rigid Scraper, Grout Scraper.

• PERFORMANCE: Delivers power to complete a wide range of jobsite applications.
• ERGONOMIC DESIGN: Lightweight tools designed to fit the users' needs.
• RELIABILITY: Tools backed by a 3 year limited warranty.
• INCLUDES: 1/4" Hex Impact Driver, Circ Saw, Oscillating Tool, Recip Saw, 1/2" Drill/Driver, Flashlight, USB Charger, Batteries, Charger, Kit Bag.
• PART OF THE PORTER-CABLE 20V MAX* SYSTEM: Battery works with all Porter-Cable 20V MAX* lithium ion products.

User questions & answers

Question:	does each tool come with a battery
Answer:	depend on what kit but no you get two batteries I really like mine we use them every day and I bought the big battery with it
Question:	Can the saw cut a solid door
Answer:	Not sure about your door I have no problem with 2x4 at all. It has cut everything that I have needed. Two small for a 4x4 in one pass however I have cut plenty. Don’t force it let the saw work. I have had mine over a year and have been doing remodeling of my home with no problems.
Question:	Is the impact driver strong enough to take off lug nuts from a tire
Answer:	1/4 in. impacts are not designed for that. They lack the power.
Question:	Does it come with all blades
Answer:	everything but the sawzaw had blades

Product features

PCC601 1/2" Compact Drill/Driver

Features 283 units watts out (UWO), 2-speed gearbox (0-350/0-1,500), compact design (8.25-in long/3.5-lbs), 1/2-in chuck, and built in LED light.

PCC641 1/4" Hex Impact Driver

Features a high-performance impact mechanism that produces 2,800-RPM, 3,100-BPM and 1,450-in-lbs of max torque for optimum power on a variety of applications. Its LED helps you work in low-light or dark work areas.

PCC661 Circular Saw

Features high-performance motor (3,700 RPM), 5-1/2-in 18-tooth carbide blade (2-1/8-in cutting capacity) and beveling shoe (50 degrees).

PCC671 Reciprocating Saw

Delivers 3,000-SPM for fast cutting, and its tool-free blade clamp allows for quick and easy blade removal or insertion. Its compact design is ideal for cutting in tight spaces.

PCC710 Oscillating Multi-Tool

Features variable-speed that produces 8,000-18,000-OPM for optimum performance on a variety of applications. Its tool-free blade clamp, universal fitment and LED provide ease of use.

PCC701 Pivoting Flashlight

Great for hands-free lighting.

PCC698L USB Charging Device

Charges two small compatible electronic devices simultaneously, for convenient charging anywhere.

Kit Bag

Great for storing the tools that are included in this kit.

Two PCC682L 2.0Ah 20V MAX* Lithium Batteries

Delivers power and runtime.

Product description

The PORTER-CABLE PCC790B 20V MAX Lithium 18GA Brad Nailer Bare tool is 100% battery powered which eliminates need for compressor, hose or costly gas cartridges (battery not included). The special motor design provides consistent firing power into various materials and climate conditions. This nailer features multiple tool free settings to provide increased productivity and user safety. The unit's lightweight and optimal center of gravity provide user comfort in multiple positions reducing user fatigue. It also offers multi functional dual LED lights to light up your workspace, and indicate errors. Fastener length capacity of 5/8" - 2", magazine capacity of 100, with sequential firing mode and trigger lock. This is a bare tool item - battery sold separately.

• 100 percent battery powered which eliminates need for compressor
• Multiple tool free settings for increased productivity
• Multi functional dual LED lights for dark work spaces
• Sequential firing mode
• Nail Diameter:18 gauge

User questions & answers

Question:	The battery for this will fit the 20v drill/impact driver set as well correct
Answer:	Yes, the beauty is all PC 20v max tools use the same battery. The only variant is amp hours. Spend a little more for an extra battery set, then buy the whole line of 20v max tools. I did, very happy with them. They are powerful.
Question:	Does this come with a charger
Answer:	This one does come with a battery & charger, but they sell a model without a charger
Question:	Will it go through 1" oak trim
Answer:	yes
Question:	can i use multiple lengths of nails
Answer:	5/8 inch through 2 inch nails....awesome gun...i am so happy with it

Product description

Amazon.com Offering seven cutting settings to handle a variety of wood types, the Porter-Cable 557 Deluxe Plate Joiner Kit boasts an industry-leading motor for powerful, dependable performance. Whether you're a professional cabinetmaker or woodworker, you'll appreciate the 557's versatile fence and efficient design. 557 Deluxe Plate Joiner Kit At a Glance: Plate Joiner kit offers seven cutting settings to handle a variety of joining applications Includes 4-inch blade for standard-size cuts Innovative fence system with pivot point provides accurate height readings Measures 7 inches high and weighs 7-1/2 pounds This plate joiner handles a wide range of joining applications and features a 7-amp motor with a rotating blade. View larger. Industry-Best Motor and Adjustment Knob Provide Power and Precision The 557 owes its robust performance to a powerful 7 amp, 120-volt motor that rotates the blade at 10,000 rpm. The fence tilts from 0 to 135 degrees for east placement of both inside and outside corner registrations. A positive adjustable stop at 90 degrees and a micro-height adjustment knob ensure proper biscuit positioning for precision and versatility. For optimum control and stability during cuts, the bale handle is attached to the fence rather than the motor. Advanced Fence System for Precision and Accuracy Complete with a lock-on trigger, the 557 boasts an innovative fence system with a pivot point that provides accurate height readings, as well as a fencing plate for stabilization, centering, and spacing. A keyhole-slotted blade cover and spindle lock make for quick and easy blade removal and changing, while seven cutting settings tackle a range of biscuit sizes and fastening accessories.

Offering seven cutting settings to handle a variety of wood types, the Porter-Cable 557 Deluxe Plate Joiner Kit boasts an industry-leading motor for powerful, dependable performance. Whether you're a professional cabinetmaker or woodworker, you'll appreciate the 557's versatile fence and efficient design.

Industry-Best Motor and Adjustment Knob Provide Power and Precision

The 557 owes its robust performance to a powerful 7 amp, 120-volt motor that rotates the blade at 10,000 rpm. The fence tilts from 0 to 135 degrees for east placement of both inside and outside corner registrations. A positive adjustable stop at 90 degrees and a micro-height adjustment knob ensure proper biscuit positioning for precision and versatility. For optimum control and stability during cuts, the bale handle is attached to the fence rather than the motor.

Advanced Fence System for Precision and Accuracy

Complete with a lock-on trigger, the 557 boasts an innovative fence system with a pivot point that provides accurate height readings, as well as a fencing plate for stabilization, centering, and spacing. A keyhole-slotted blade cover and spindle lock make for quick and easy blade removal and changing, while seven cutting settings tackle a range of biscuit sizes and fastening accessories.

Compact for Portability and Comfortable Handling

For easy portability, handling, and storage, the 557 has a height of 7 inches and weighs just 7-1/2 pounds.

What's in the Box

Plate joiner, #5558 4-inch blade, #888776 centering plate, #883175 dust bag, #886490 chip deflector, #891869 Allen wrench, carrying case, and operating manual.

• Plate joiner kit handles a variety of wood and offers seven different cutting settings
• Industry-leading, super powerful 7-amp motor rotates blade at 10,000 RPM
• Fence tilts from 0 degrees to 135 degrees with positive adjustable stop at 90 degrees
• Plate joiner kit handles a variety of wood and offers seven different cutting settings. Seven-position rotating depth stop for FF, #0, #10, #20, Simplex, Duplex, and Max (#6) biscuits
• Industry-leading, super powerful 7 Amp motor rotates blade at 10,000 RPM. Fence tilts from 0 degrees to 135 degrees with positive adjustable stop at 90 degrees
• Four-inch blade makes standard-size cuts; two-inch blade easily handles cuts as fine as 1-1/2 inches
• Measures seven inches in height and weighs 7.5 pounds
• Comes with 4-inch blade, centering plate, spanner wrench, dust bag, and chip deflector

User questions & answers

Question:	how do you fix dust collection on model 557 from getting clogged
Answer:	No
Question:	hard to find the 2 inch cutter, showing discontinued at most sites, including porter cable, does this render useless the FF biscuit
Answer:	Roughly 10 1/4 in by 2.
Question:	Is this biscuit joiner available with 240V as well
Answer:	It did not fit my 12” mitre Ridgid saw.
Question:	Can you do FF work with this joiner using the stock 4" blade that comes with it, or do you have to purchase the 2" blade
Answer:	I do not have any idea

Product features

Porter-Cable 557 7 Amp Plate Joiner Kit