6 best trim air compressor

Product description

The Bostitch CAP1512-OF 1.2 Gallon Oil-Free High-Output Trim Compressor has a high-output oil-free pump that delivers 2.8 CFM @ 90 PSI and 150 PSI max operating pressure for multiple finish tool operations. The 2.0 HP (Peak), 1.5 HP (Running) motor draws 12 amps for easy start up without tripping circuit breakers. The 1.2 gallon compact design only weighs 23.5 lbs. for easy portability to and from a jobsite. It has an integrated control panel with roll cage that protects gauges from jobsite damage. The LED ON/OFF switch lets you know when the compressor is on to eliminate low-pressure misfires. It has on-board tool and hose storage and a convenient storage pocket for hand tools, fasteners and fittings. The integrated cord wrap improves portability. It also has integrated no-marring rubber feet.

• High-output oil-free pump delivers 2.8 CFM @ 90 PSI and 150 PSI max operating pressure for multiple finish tool operation
• 2.0 HP (Peak), 1.5 HP (Running) motor draws 12 amps for easy start up without tripping circuit breakers
• 1.2 gallon compact design weighs 23.5 lbs. for easy portability
• Integrated control panel with roll cage protects gauges from jobsite damage
• LED ON/OFF switch lets you know when the compressor is on to eliminate low-pressure misfires

User questions & answers

Question:	I am looking for an air compressor mainly for filling bike tires and pool toys, maybe occassionally car tire. Would this be the size and quality I need
Answer:	Pretty much this is your gadget. Excellent for inflating small toys, bike tires in a few seconds. With car tires, inflation from zero pressure can be accomplished, but not recommended routinely. For top ups of under inflated auto tires, this is your handy tool. The storage tank holds enough for a remote inflation if a power supply is not available. Just remember to drain the storage tank of air when you are finished for the day!!Darin
Question:	Is this product powerful enough to use on removing nuts on car /truck wheels
Answer:	Absolutely YES as I've done it...Depending, you might need to wait a couple seconds between wheels but it will technically do it...Of course it would be way too under powered (not enough cfm) to be used in a shop type atmosphere...Which is why I imagine a few have answered no, but you have to remember that cfm ratings are based on continuous use so short blasts obviously don't need as much cfm...This compressor pumps back up from 120 to 150 psi in about 10 seconds, so even if you had to wait, it would only be a few seconds...Plenty good for a DIY... kd
Question:	does this compressor work for sandblasting
Answer:	you need to first find the requirements of the sandblast uint, then choose a compressor.but this unit is so small that only a jeweler would use it for sandblasting.
Question:	sprinkler
Answer:	umbrella

Product features

Compact and Useful

Although the BOSTITCH Air Compressor is lightweight that weighs 23.5 lbs., and a compact design of 1.2 gallon, the performance of the tool speaks for itself. The size of the tool with the Integrated cord wrap is what gives it the portability feature. The compressor consists of a high-output oil-free, maintenance-free pump that delivers 2.8 SCFM* @ 90 PSI and a maximum tank storage pressure of 150 PSI. This makes it the perfect partner for use with finish nailers and staplers for applications such as installing trim, baseboard, door frames, cabinets, or window casings.

In-built features for protection of the Air Compressor

The Air Compressor has an in-built Control Panel to protect the gauge from any damage that might occur at the site. LED On/Off switch lets you know when the compressor is on to eliminate low-pressure misfires.

Product description

Senco PC1010 1 Horsepower Peak Electric Oil-Less Compressor, GreyThe PC1010 is ultra-quiet and ultra-light lubeless pump compressor.Senco PC1010 1 Horsepower Peak Electric Oil-Less Compressor, Grey Features: Hand carry - ultra-quiet and ultra-light, only 20 lbs. Direct drive induction motor/pump for efficient operation 1 hp. (peak) .5 hp. (running), oil-less motor 1 gallon air capacity, aluminum tank 4 amps @115V, 120 psi max output 1/4" quick disconnect coupler Individual gauges for tank and regulated output pressure Lubeless pump CSA approved Manufacturer 1-year warranty

• Lightweight and portable--easy to carry from site to site as you work
• One horsepower peak ,1/2 horsepower runningand one-gallon capacity
• Ideal for a range of renovation and home improvement jobs, as well as for hobbies and crafts
• Delivers 20 to 44 drives per minute
• Backed by a one-year warranty

User questions & answers

Question:	Has anyone used this compressor for an airbrush? If so how has it held up
Answer:	If the motor is 3.7hp and the 5hp and has the same rpms it should never be a problem
Question:	Can this be used with an HVLP spray gun (viz. DeVilbiss 802405 StartingLine
Answer:	Clock wise
Question:	I want to use this to for my trailer tires which require 90 lbs. What is the max pressure this will produce
Answer:	The rotation can be changed to each direction.
Question:	What's the noise level; decibels if i may
Answer:	They are they same.no difference

Product features

Senco PC1010 1-Horsepower Peak, 1/2 hp running 1-Gallon Compressor

The Senco PC1010 Air Compressor is small yet powerful. Having this product at home makes life a lot easier as it helps in filling air into bicycle and motorcycle tires, works fine with Air Brush and act as an effective support for the Nailers or Pinners.

Packs a 1- Horesepower peak

The compressor performs all the jobs uninterrupted with the 1 Horsepower when on peak and ½ Horsepower while running. The compressor has a one-gallon capacity.

Easy to Carry

As the compressor is small and lightweight it is extremely portable. With a tough job at hand already you would want the tool to be as light and easy to operate. The Senco PC1010 tool is easy to maneuver at home as well as to be carried and used everywhere you go.

Noiseless operation

While working with the compressor you or your family do not have to worry about the earsplitting noise that such tools usually make. Ensuring that your day to day activities do not take a hit, the Air Compressor is designed to have an ultra-quiet operation. It is so quiet that one wouldn’t even realize that there is a tool performing a job so close.

Product description

INCLUDES: Two Universal Air Couplers (attached) Instruction ManualFEATURES: 3.0 SCFM delivered @ 90 PSI pump, 2.5 gallon tank and 200 max PSI enables large amount of nails to be fired and provides quick recovery Durable oil free pump provides extended maintenance-free operation Low 71.5* dBA allows for quieter operation (*Tested per ISO3744) Low 12 amp draw motor provides easy start-up and reduces breaker tripping Lightweight (36 lbs), thin (12.5") and compact design is easy to carry and store Compressor can be operated/stored in either the vertical or horizontal position

• 3.0 SCFM delivered at 90 PSI pump, 2.5 gallon tank and 200 max PSI ; Pump Speed 2,300 rpm
• Durable oil Free pump provides extended maintenance Free operation
• Low 71.5 dB allows for quieter operation;High flow regulator for increased Performance
• Low 12 amp draw Motor provides Easy start up and reduces breaker tripping
• Lightweight (36 pounds), thin (12.5") and Compact Design is Easy to carry and store

User questions & answers

Question:	Hardwood installs, i been using 6gal @2.8 scfm will it do as good if not better being a 2.5 tank w/3.0 scfm's. Will this work
Answer:	This model delivers 3.0 SCFM @ 90 PSI with a maximum tank pressure of 200 PSI. Please consult your tools CFM requirements to confirm if this will work.
Question:	Will this run a standard 1/2" impact wrench.? Im looking for a small garage unit for tires and minor service. Die grinder, impact etc
Answer:	No enough air capacity..
Question:	What is the duty rating on this unit? Is it 50% like most oiless
Answer:	"This air compressor pump is capable of running continuously. However, to prolong the life of your air compressor, it is recommended that a 50% average duty cycle be maintained; that is, the air compressor pump should not run more than 5 minutes in any 10 minute period." (Quoted from the instruction manual) -- so the short answer would be yes.
Question:	Can anyone confirm this compressor will run off a Honda EU2000i generator
Answer:	Your generator could this pretty easily. Any (US) generator rated for 1400 watts or higher will work. Most (US) 1000w generators will work, so long as they accept spikes up to 1400w. Yours accepts 1600w continuous with spikes up to to 2000w.

Product features

DEWALT DWFP55130 Heavy Duty 200 PSI Quiet Trim Compressor

This 2.5 Gallon, 200 Max PSI, compressor is ideal for supporting a variety of pneumatic and air tool applications. The oil-free pump delivers 3.0SCFM @ 90PSI for long tool runtime and quick recovery. The compressor can be operated/stored in either the vertical/horizontal position for quick and easy space-saving around a garage or jobsite.

Product description

Senco 1 gallon finish & trim air compressor is designed with the professional contractor in mind: compact, lightweight hand carry, sturdy, powerful, oil-free, 102 second pump up time, 27 second recovery time, low maintenance and warrantied. Our compressor truly makes hard work easier. The PC1010N is lightweight at just 21 lbs. (9.53 kg), and its compact design measuring 14x13x10 ensures easy portability to any jobsite. The gauges on our control panel are easy to read and the integrated control panel is designed for easy access and straightforward operation. In addition, the PC1010N features an ultra-quiet 68 dBA noise level of operation – A standard Garbage Disposal is louder – and a rugged, rust-resistant, aluminum design. Every contractor and DIY enthusiast will agree this is an ideal “finish and D6 trim unit” for finish trim nailer, pin nailer and more – especially since its ¼” coupler is a universal design. That makes it compatible with a variety of air tools from all of the top manufacturers. The long life induction motor and oil free pump eliminate the need for oil and regular maintenance. Its direct drive pump/motor offer efficient operation. There are numerous safety features included in the design of the PC1010N. For example, the motor/pressure switch has a pressure release valve that automatically releases compressed air from the air compressor pump head and its discharge line when the air compressor reaches cut-out pressure or is shut off - allowing the motor to restart freely. Also, the motor has a protective Breaker on the pump which trips if there is an excessive Amperage draw - protecting both the operator and the motor itself. The air intake filter doesn't need to be replaced; It is reusable and should always be clean with its ventilation opening free from obstructions. It can be cleaned by using warm, soapy water and then rinsed and set out to air dry. Further, there is a safety relief valve designed to prevent system failures by relieving pressure from the system when the compressed air reaches a predetermined level. Having been preset by the manufacturer, it should not be modified in any way. Additionally, the air tank drain valve is used to remove moisture from the air tank after the compressor is shut off. Never attempt to open the drain valve when more than 10 PSI of air pressure is in the tank. To open the drain valve, turn the knob counterclockwise then tilt the tank to ensure that all condensation drains through the valve. Additional features can be seen in detail in the user manual, included in the packaging. The power cord included with this unit is 6 feet long. If additional length/distance is needed, Senco recommends using one of our 50’ or 100’ proFlex or push on ¼” air hoses – available on Amazon – instead of an extension cord. If use of an extension cord is unavoidable, it should be plugged into a GFCI found in circuit boxes or protected receptacles. If use of an extension cord is unavoidable, refer to our operating manual and observe the recommended cable Length and wire Gauge listed. Additionally, use only 3-blade extension cords that have 3-blade grounding-type plugs and 3-slot cord connectors that will accept the plug from the PC1010N. Use only extension cords having an electrical rating not less than the rating of the product.

• 1-GALLON TANK & MAX PRESSURE OF 135 PSI - less than 2 minutes to pump up and less than 30 seconds of recovery. Perfect for finish & trim work on the job and hobbies & crafts at home
• OIL-FREE - requires virtually no maintenance and lets you work in a cleaner air environment compared to legacy cast iron, belt driven, oil lubricated compressors
• QUIET MOTOR - provides all the power you need for finish jobs, with significantly less noise than traditional gas compressors
• COMPACT DESIGN - 14"x13"x10" makes it easy to hand carry and load onto a truckbed or back seat for any number of finish jobs

User questions & answers

Question:	Is this compressor good for roofing nailing?, Not full day usage! Thx
Answer:	7" from floor to platform and then 2" for railing. 8.5" wide and 17.5 long. The wide and long measurements are on the inside of railing where bowls will go. I love this item. I use it for water only. I did have to zip tie the legs together but that was my only issues and not enough of an issue to keep from using it or liking it.
Question:	Where is this compressor made
Answer:	I have the "Toby" (17x9x7 inches) and I actually have it up pretty high, but it is still low enough for my cat to access the water bowl alongside the dog. While I imagine the cat is smaller than / about the same height as an English Bulldog, I would suggest the "Gizmo" (13x7x3 inches) because the Internet tells me Bulldogs reach between 12-13 inches in height...
Question:	how does it hold up to salt water environments? Rust
Answer:	I got the "Toby" and to the platform it's 7", but it's another 1 1/2 inches over the top of the rim that keeps the bowls in place.
Question:	Can i run this compressor continuously, assuming i have adequate pressure for my gun, even while the tank is recharging? or must i give it a rest
Answer:	Hello, This pet feeder comes with 2 stainless steel bowls.

Product description

Made with a durable lightweight construction and convenient low noise design the Black & Decker Oil-Free Hand Carry Compressor is easy to handle and extremely portable. Includes a .75 SCFM, 135 PSI and a one gallon capacity.

The DeWalt D55140 One-Gallon, Max 135-PSI Trim Compressor is a one-person tool that offers efficiency and dependability. This indispensable hand-carry compressor features a lightweight, compact design and quiet operation for punch-out work. Ideal for finish carpenters and woodworkers, the D55140 can be used for remodeling and custom installation of shelves or other furniture, cabinet trim installation, pressure-testing new plumbing lines, and more.

The DeWalt D55140 Max 135-PSI Trim Compressor At a Glance: 2.6-Amp motor; 90 - 135 PSI Quiet 69-dB rating Durable oil-free pump Compact and portable at 24 pounds

Control panel features universal connection for use with any pneumatic tools. View larger.

Portability and quiet operation make the compressor especially versatile.

Versatile, High-Performance Compressor

Whether you're testing plumbing lines or making quick work of a remodeling project, the D55140's high-performance operation simplifies trim work and other jobs.

The D55140 features a one-gallon tank and a 2.6-amp motor that delivers 0.75 SCFM at 90 PSI and 135 PSI max, which makes for high-surge performance and quick recovery. Additionally, the draw motor offers easy startup and reduced breaker tripping, as well as a high-flow regulator that provides maximum air pressure to increase jobsite performance. And running at 69 dBA, the D55140 provides end users with a quieter operation compared to the competition.

The D55140 is also equipped with an oil-free, long-life pump, allowing for maintenance-free operation. The oil-free design of the pump eliminates the need for you to check or refill the pump, and it also helps keep your jobsite clean by preventing oil from transferring to your work surface.

Exceptionally Durable for Long Life

The efficient and unique design of the D55140 ensures maximum durability and longevity. DeWalt built the heavy-duty cast-iron compressor with an innovative roll cage and a full-protection frame designed to shield the unit from routine wear and tear and accidental damage. In addition, a wrap-around control panel covers the frame and provides further protection of key compressor components.Compact, Lightweight Design for Easy Portability

Measuring 24 pounds and with a height of just nine inches, the D55140 is ideal for those who prefer hand-carry compressors. For further convenience, DeWalt equipped the D55140 with a one-hand, universal quick connection for easy-to-use operation with any of your pneumatic tools. And for increased efficiency, the D55140 was designed with a ball drain valve for quick and thorough tank draining and with a convenient cord wrap for easy storage.

What's in the Box

135-PSI compressor and manual.

From the Manufacturer

Ideal for finish carpenters and woodworkers, the D55140 can be used for custom installation of shelves or other furniture, cabinet trim installation and for pressure-testing new plumbing lines. Performance -The D55140 produces .75 SCFM at 90 PSI, 135 PSI (Max), delivering high surge performance with quick recovery, and at 69 dBA, provides end users with a quieter operation, compared to existing compressors in the marketplace. The compressor was designed with a 2.6 amp draw motor to deliver easy start-up and reduced breaker tripping, as well as a high flow regulator that provides maximum air pressure to increase jobsite performance. The D55140 is also equipped with an oil-free, long-life pump, allowing for maintenance-free operation. The oil-free design of the pump eliminates the need for users to check or refill the pump, and also helps to keep the jobsite clean by preventing oil from transferring to work surfaces. Ease of Use/Portability - The compact design of this unit is ideal for end users who prefer hand carry compressors. Weighing just 24 pounds and measuring 9” wide, the compressor is easily transported and stored, making it ideal for knock-out work. In addition, DEWALT equipped the compressor with a one-hand, universal quick connect for easy-to-use operation. For increased efficiency, the D55140 was designed with a ball drain valve for quick and thorough tank draining and a convenient cord wrap for easy storage. Durability - The efficient and unique design of the D55140 ensures maximum durability and longevity. DEWALT built the heavy-duty compressor with an innovative roll cage, full-protection frame design to shield the unit from routine wear and tear and accidental damage. In addition, a wrap-around control panel covers the frame and provides further protection to key components of the compressor.

• Heavy-duty 1-gallon trim compressor with protective roll cage
• 135 psi maximum, durable oil-free pump, low 71 dB rating, low 2.6 amp motor
• Includes 1 compressor; hose & nailer not included
• 9-inches wide; 24 pounds; 1-year warranty

User questions & answers

Question:	Can I use 220V
Answer:	Made in USA. I.E.E.
Question:	What are the actual dimensions? The ones in the description are contradictory
Answer:	Everything we've seen on this requires it to be installed horizontally
Question:	Is this 1 gallon compressor enough to work with 3'' nail air nailer
Answer:	Not sure what the specs say. I have no problem with mine on a Dewalt with 175 psi tank pressure.
Question:	hows does it recharge
Answer:	If you put a p-trap before the rise, it will "percolate" up. It's how you get oil return going up 10 feet on walk-in coolers. If you buy a copper refrigeration trap, 7/8 refrigeration fitting is the same as 3/4 plumbing copper, 5/8=1/2" (od vs id)

Product features

DEWALT Air Compressor, 135-PSI Max

Low Maintenance, High Performance

The DEWALT Air Compressor D55140's high-performance operation makes is made to simplify jobs by powering your air tools, for construction jobs as well as for household applications. The compressor features a one-gallon tank and a 2.6 amp motor to deliver 0.75 SCFM at 135 PSI max. These features results in high-surge performance. The compressor’s high flow regulator provides maximum air pressure that enhances the performance of the machine. All of this and more at just 69 dBA, that makes it so quiet that you wouldn’t notice the compressor unless you see it.

The Oil-free operation of the Air Compression makes it easy to maintain as you will not have to worry about filling in the compressor with oil or changing the pump regularly.

Long-lasting construction

The Air Compressor’s is constructed with heavy-duty cast iron that is surrounded by a roll cage along with a full-protection frame that protects the machine from any damage. Additionally, a wrap-around Control Panel guards the unit an shields the key parts.

Lightweight and Portable

The DEWALT Air Compressor D55140 is sturdy but not bulky. The unit weighs about 24 pounds and is just nine inches in size making it extremely easy-to-carry around when in need. It is easy to connect and saves time.

Product description

Compressors are workhorse tools on the job site and in the workshop. Makita® Air Compressors are favorites for their faster recovery time, lower noise, longer tool life, and consistent performance. The Makita® ½ HP 1 Gallon Compact, Oil-Free, Electric Air Compressor (MAC100Q) features a Quiet Series Design, combining strong performance with lower noise. At only 58 dBA, it’s ideal for indoor use during case and base installation, trim and finish carpentry, cabinet or furniture making, and more. The MAC100Q runs at a lower RPM, resulting in longer motor and pump life. It is powered by an efficient 1/2 horsepower induction motor that provides up to 135 PSI. It also features a lightweight design (only 25.5 lbs.) for increased portability. The roll-cage construction provides added protection for the pump and motor assembly during transportation, in storage, and on the job site. Additional features include a low AMP draw that reduces the incidents of tripped breakers at start-up, as well as an oil-free dual-piston pump designed for maintenance-free operation. The Makita® 23 Gauge Pin Nailer (AF353) offers an array of features and powerful performance in a compact size. The AF353 has a side, drop-in loading magazine that accepts standard 23 ga. headless pins sized 5/8", 11/16", 3/4", 1", 1-3/16", and 1-3/8". The nail lock-out and red window alerts the user when to reload pins. With a compact size and weighing only 2 lbs., the AF353 was engineered for all-day professional use installing molding, chair rail, window beading, cabinets, paneling, tacking trim, glass, cross pinning dowels & joints, assembling picture frames, and a wide range of other woodworking applications. Additional convenience features include a reversible belt hook that allows the tool to remain close-by, a rear exhaust port that directs exhaust air away from the user and work surface, a built-in air duster that provides convenient air flow to clear your workspace, and two removable no-mar tips with sightlines for increased pinning accuracy.

• Quiet Series compressor design at only 58 dB for operator and crew comfort; ideal for indoor use
• Compressor runs at a lower RPM (1,750) resulting in longer motor and pump life
• Complete roll-cage construction provides the compressor with protection to withstand a variety of job-site, transporting, and storage environments
• Oil-free dual-piston pump designed for maintenance-free operation
• Compressor features a lightweight design for increased job site portability, an oil-free dual-piston pump designed for maintenance-free operation, and a cord wrap for convenient AC power cord storage