14 best high cfm air compressor

Product description

The CALIFORNIA AIR TOOLS 10020C Ultra Quiet & Oil-Free Air Compressor is designed to be one of the quietest 2.0 Hp air compressors in the industry having only 70 decibels of sound. The Powerful "New" 2.0 HP (SP-9421) motor operates at only 1680 RPM creating less noise and less wear. The "New" SP Series of Ultra Quiet Air Compressor Motors have been designed to increase duty cycle and allow for longer continuous run times. The Oil-Free Dual Piston Pump System is engineered for high performance and durability. The CAT-10020C Air Compressor has an Oil-Free Dual Piston pump designed to have a life cycle before wear of 3000 plus hours compared to other comparable air compressors with life cycles of 500 hours or less. The Oil-Free pump allows for use in a variety of temperatures (cold starts) and uneven terrains (no oil in the pump). The Easy Start Valve feature allows for a easier start up using less starting amps. The Easy Start Valve releases a small amount of air from the pump at start up to produce a no-load condition allowing the motor to spin freely. This no-load start up requires less amps for an easier start up in cold temperatures. The large 10 Gallon Steel Air Tank with wheel kit makes it very easy to move around the jobsite, shop or garage. Designed for the person looking for Power, Air Flow, Less Service and Maintenance with at Least 30% Less Noise!.

• Ultra Quiet, only 70 Decibels
• Oil-Free Pump for Less Maintenance & Costs
• Powerful 2.0 Hp with Low amp draw - 7.0 Amps
• 6.40 CFM at 40 PSI & 5.30 CFM at 90 PSI. Dedicated 15 amp outlet -14 gauge 25ft cord - Min. 5500 Watt Generator. Maximum continuous running 30-60 min. (Depending PSI & CFM)
• 10 Gallon Air Tank with Wheels.125 PSI maximum pressure
• Dimensions: 16" L x 15.1" W x 35.9" H

User questions & answers

Question:	My air compressor has stopped working how do I get warrantied
Answer:	Yes, Harbor freight.
Question:	i don't see a drain valve. how does it drain
Answer:	Imcompatible with V style coupler.
Question:	Where is this product made
Answer:	Air direction does not matter so you can combine two compressors. The issue I had trying to do sandblasting with 1/4" connectors is going to be flow rate. Most 1/4" connectors are only passing around 32-40 CFM. Even with two good sized compressors I wasn't getting the air flow I needed. A holding tank near the blaster and 3/8" lines helped a lot.
Question:	Is there any power benefit for going 240v such as more CFM
Answer:	Do not use this with a pressure washer. This item, like all pneumatic equipment, is not rated for much more than a few hundred psi. Your pressure washer almost certainly goes higher than this.

Product features

California Air Tools 10020C

The CALIFORNIA AIR TOOLS 10020C Ultra Quiet & Oil-Free Air Compressor is designed to be one of the quietest 2.0 Hp air compressors in the industry having only 70 decibels of sound. The Powerful 'New' 2.0 HP (SP-9421) motor operates at only 1680 RPM creating less noise and less wear. The 'New' SP Series of Ultra Quiet Air Compressor Motors have been designed to increase duty cycle and allow for longer continuous run times. The Oil-Free Dual Piston Pump System is engineered for high performance and durability. The CAT-10020C Air Compressor has an Oil-Free Dual Piston pump designed to have a life cycle before wear of 3000 plus hours compared to other comparable air compressors with life cycles of 500 hours or less. The Oil-Free pump allows for use in a variety of temperatures (cold starts) and uneven terrains (no oil in the pump). The Easy Start Valve feature allows for a easier start up using less starting amps. The Easy Start Valve releases a small amount of air from the pump at start up to produce a no-load condition allowing the motor to spin freely. This no-load start up requires less amps for an easier start up in cold temperatures. The large 10 Gallon Steel Air Tank with wheel kit makes it very easy to move around the jobsite, shop or garage. Designed for the person looking for Power, Air Flow, Less Service and Maintenance with at Least 30% Less Noise!

SP-9421

Ultra Quiet - 70 Decibels.

Oil-Free

Cleaner air for better tool operation.

Less maintenance and Costs.

Dual Piston

Faster Air Delivery.

SP-9421

6.40 CFM @ 40 PSI

5.30 CFM @ 90 PSI

Low Amp Draw

14 Amps

Thermal Overload Protector

Over Heating Protection.

CAT-10020C

Only 70 Decibels

10 Gallon Steel Tank

10 Gallon Steel Air Tank With Wheel Kit.

Easy to move around.

Complete Control Panel

Easy to Use Controls.

California Air Tools

The Largest Manufacture of Ultra Quiet, Oil-Free and Lightweight Air Compressors.

To provide the Highest Quality Products with the Latest Innovations is our Mission.

Product description

Prefer to choose one versatile air tools to complete your innovation work more faster? STEALTH brand air compressor won’t let you down. The 20 Gallon model SAQ-12018, it owns peak 1.8 horsepower power but the working noise is only 68 decibels. It has been tested 3 times longer life time compare with the standard induction motors. Enable cold weather start and low voltage start, and 5 CFM@ 90 PSI outputs can support almost all the air tools accessories, like inflation/ cleaning tools, finishing nailer, framing nailer, die grinder, angle grinder, cut-off tool, diy paint system, brad nailers, impact wrenches, drill/hammer/chisel/ shears, sander/polisher, grease/caulking gun etc Heavy duty design with Q235B special alloy metal, with the ultra quiet dual piston pump, like the safe guard stand by you watch you finish your innovation work silently. Limited lifetime warranty provide by US local company and service team. Save worry , just enjoy your work everyday!

• ✦【ULTRA QUIET & 3 TIMES LONG LIFE】STEALTH innovative quiet system air compressor have been tested to be up to 80% quieter and qualify to 3 times longer life than standard induction motors
• ✦【POWERFUL & 20 GALLON CAPACITY】High quality induction motor generates the 1. 8 horsepower power, time of recharge the air tank from empty to full only 70 seconds. 20 Gallon capacity enable your innovation work continue without break
• ✦【ULTRA QUIET SERIES& LONG LIFE CYCLE】Working noise only 68 decibels, ultra quiet and long-life cycle working hours more than 1000H. More quieter and save more money and time to replace new device
• ✦【DIVERSITY and VERSATILE】Peak 150 PSI, 6 CFM @ 40 PSI and 5 CFM @ 90PSI, Support inflation, finishing nailer , angle grinder, cut-off tool, impact wrenches, drill, hammer, chisel, sander, polisher, crease air tools etc
• ✦【EASY COLD START & STURDY】Support cold weather start and low voltage start. Housing structure build with Q235B alloy metal heavy duty design, Pass ETL certification. 8 inch rubber reinforced wheels features easily mobility

User questions & answers

Question:	Can I use this for mobile auto detailing
Answer:	No. It does come with one switch and the wiring harness has provisions for two additional switches and two solenoids at the compressor end of the harness. The instructions state that the solenoids and switches are part of the ARB locker kit(s). You can probably also buy switches and solenoids separately.
Question:	Can you use this with a regular outlet
Answer:	We do ship to the UK, but do not have a way to do it through Amazon. We handle it through Paypal only. This item ships in a USPS Priority Mail medium flat rate box for about $65.Thanks,Tom
Question:	CFM at 90 psi? 40 psi
Answer:	I cannot believe Amazon and ARB have not jumped on the fact that they do NOT list "what's in the box"! Shame on Amazon!Check the ARB website.It does indeed come with all you listed above except I am not sure if it has the mounting clamp or backing plate. I bought mine as a replacement for the same unit after 7 years of service. I did not need anything except the compressor. Good luck.
Question:	What is the Amps it has
Answer:	Here is a video I uploaded onto youtube. The compressor is mounted to a piece of 3/4" partical board (I still need to carpet it), which is mounted to some 1"x1"x1/8" angle steel, which I sandwich clamped onto my Garvin Wilderness interior rack in my 2015 Xterra which the legs were wrapped with a few wraps of "F4" or "self fusing tape" as found here on Amazon. The prevents damaging the finish on the legs, and provides another layer of vibration and noise dampening. Please note, I did not rehearse the recording so I say a few mistakes here or there, but you will get the point. https://www.youtube.com/watch?v=TVDWN7hc_Fk

Product description

The CALIFORNIA AIR TOOLS 4620AC Ultra Quiet & Oil-Free Air Compressor is designed to be one of the quietest 2.0 Hp air compressors in the industry having only 70 decibels of sound. The Powerful "New" 2.0 HP (SP-9421) motor operates at only 1680 RPM creating less noise and less wear. The "New" SP Series of Ultra Quiet Air Compressor Motors have been designed to increase duty cycle and allow for longer continuous run times. The Oil-Free Dual Piston Pump System is engineered for high performance and durability. The CAT-4620AC Air Compressor has a Oil-Free Dual Piston pump designed to have a life cycle before wear of 3000 Plus hours compared to other comparable air compressors with life cycles of 500 hours or less. The Oil-Free pump allows for use in a variety of temperatures (cold starts) and uneven terrains (no oil in the pump). The Easy Start Valve feature allows for a easier start up using less starting amps. The Easy Start Valve releases a small amount of air from the pump at start up to produce a no-load condition allowing the motor to spin freely. This no-load start up requires less amps for an easier start up in cold temperatures. The large 4.6 Gallon Aluminum Air Tank is only 67.2 pounds making it very easy to move around the jobsite. Designed for the person looking for Power, Air Flow, Less Service and Maintenance with at Least 30% Less Noise.Low Amp Draw - 14 Amps

• Ultra Quiet only 70 Decibels
• Powerful 2. 0 HP (Rated/Running) Motor
• Oil-Free Pump for Less Maintenance & Costs
• 4. 6 Gallon (Rust Free) Aluminum Twin Tank
• 125 PSI Maximum Pressure
• Dedicated 15 amp outlet -14 gauge 25ft cord - Min. 5500 Watt Generator

User questions & answers

Question:	Does it come with a hose
Answer:	No
Question:	Whats the amp draw
Answer:	It draws 14 amp
Question:	What size is the drain valve
Answer:	Typical tank drain, 1/4" npt I believe
Question:	How durable is this compressor as a replacement for a Thomas oilless compressor rated for continuous duty
Answer:	I never had a "Thomas Oilless", but my california air tools compressor is constantly running 8 hours a day to run a cnc machine. It's held up very well.

Product features

California Air Tools 4620AC

The California Air Tools 4620AC Ultra Quiet & Oil-Free Air Compressor is designed to be one of the quietest 2.0 Hp air compressors in the industry having only 70 decibels of sound. The Powerful 'New' 2.0 HP (SP-9421) motor operates at only 1680 RPM creating less noise and less wear. The 'New' SP Series of Ultra Quiet Air Compressor Motors have been designed to increase duty cycle and allow for longer continuous run times. The Oil-Free Dual Piston Pump System is engineered for high performance and durability. The CAT-4620AC Air Compressor has a Oil-Free Dual Piston pump designed to have a life cycle before wear of 3000 Plus hours compared to other comparable air compressors with life cycles of 500 hours or less. The Oil-Free pump allows for use in a variety of temperatures (cold starts) and uneven terrains (no oil in the pump). The Easy Start Valve feature allows for a easier start up using less starting amps. The Easy Start Valve releases a small amount of air from the pump at start up to produce a no-load condition allowing the motor to spin freely. This no-load start up requires less amps for an easier start up in cold temperatures. The large 4.6 Gallon Aluminum Air Tank is only 67.2 pounds making it very easy to move around the jobsite. Designed for the person looking for Power, Air Flow, Less Service and Maintenance with at Least 30% Less Noise.

SP-9421

Only 70 decibels.

Oil-Free Pump System

Cleaner Tool Operation.

Less Maintenance and Costs.

Dual Piston System.

SP-9421

6.40 CFM @ 40 PSI.

Fast Delivery and Recovery

1760 RPM.

Low Amp Draw

Only 14 amps.

CAT-4620AC

4.6 Gallon (rust-free) twin Aluminum Tank.

Light Weight

Only 64 pounds.

Easy to Transport

Two Quick Connect Outlets.

California Air Tools 4620AC Power 2.0 Hp Ultra Quiet Air Compressor

Designed for High Demand Air Tools with the need for less noise!

Product description

Portable Electric Oil-Lubricated Air Compressor, Twin Stack Tank Type, HP 2.5, 115VAC Voltage, Full Load Amps 12.3, Free Air CFM @ 90 PSI 4.2, Max. Pressure 130 psi, Tank Size 4.2 gal., Weight 77 lb., Cylinder Material Cast Iron, Lubrication Type Oil Lubricated, Motor RPM 1730, Avg. Pump Life 2, 000 hr., dBA @ 3 Feet 79.0, Overall Length 19-3/8 In., Overall Width 18-3/4 In., Overall Height 18 In., Compressor Oil Includes.

Makita's 2.5HP Air Compressor is equipped with Makita's Big Bore engineered pump cylinder and piston for higher output for two nailers, with less noise and improved job site performance. The MAC2400 delivers industrial power and results with improved durability under tough job site conditions.

2.5 HP with Big Bore Engineered Pump

The MAC2400 is powered by a 2.5 HP motor. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job-site conditions. The MAC2400 has an oil-lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The Big Bore oil-lubricated pump is also more efficient: the MAC2400 runs cooler and at half the RPM of most competitive units, resulting in greater motor and pump life and lower noise. The 4.2 gallon twin-stacked tank sustains an operating pressure of 130 PSI, and delivers 40PSI (4.8 CFM) and 90 PSI (4.2 CFM), enough for two nailers. The low AMP draw reduces instances of tripped breakers and voltage drop that can cause premature motor failure. The roll bar handle provides portability and additional protection, helping it withstand harsh jobsite environments. Additional features include a convenient oil drain and oil sight glass, a tank drain valve that supersedes standard petcock design for easier maintenance, and finned discharge tubing that dissipates heat more efficiently.

Versatile Design for a Range of Applications

The MAC2400 is engineered for low noise, high output and less maintenance, and delivers industrial power and results with improved durability under tough job site conditions. The MAC2400 is just another example of Makita's commitment to innovative technology and best-in-class engineering.

About Makita Big Bore Air Compressors

Makita Big Bore Air Compressors deliver higher output and less noise for improved job site performance. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. All Makita Big Bore Air Compressors are oil lubricated and equipped with large automotive style filters for increased air intake and greater efficiency. Makita Big Bore Air Compressors deliver industrial power and results with improved durability.

About Makita

Makita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.

Warranty

Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. Please see makitatools.com for complete details.

What's in the Box

Makita MAC2400 2.5 HP Air Compressor, oil and 1/4-inch universal quick coupler.

From the Manufacturer

The new MAC2400 - Twin Stack air compressor by Makita is blowing away the competition. With built-in features such as a super quiet motor that draws only 12.3 amps to operate, a lower 1720 RPM rating and a heavy duty Intake Air Filter system like no other, its easy to see how this unit will out last and outperform everyone else. It delivers 4.2CFM @ 90PSI and is equipped with a lever handled ball valve drain system to get rid of condensation build up in the tank . The exclusive finned discharge tubing increases heat dissipation while reducing moisture in the lines and the easily removable cast iron cylinder reduces wear for increased pump life. High quality, maximum performance - just what you expect from Makita.

• Dimensions: 19.38" D x 18.75" W x 18" H | Weight: 77 lbs
• Low AMP draw reduces incidences of tripped breakers at start up. The 4.2 gallon twin stacked tank sustains an operating pressure of 130 PSI, and delivers 40 PSI (4.8 CFM) and 90 PSI (4.2 CFM), enough for two nailers
• Pump is oil lubricated for cooler running temperatures and reduced wear. Built in thermal overload for additional motor protection. Compressor Oil (181122 A). 1/4 inches Universal Quick Coupler (447013 E)
• Roll cage construction provides complete protection to withstand extreme jobsite environments. Lever handle ball valve tank drain valve improves upon standard petcock design for easier maintenance
• Large automotive style industrial air filter for increased air intake and greater efficiency. Durable cast iron cylinder reduces wear and increases pump life; removable for easy maintenance. Oil sight glass for fast, easy and efficient maintenance
• Cast iron pump with Big Bore cylinder and piston is engineered to provide faster recovery time for improved performance
• Oil lubricated: Cooler running pump, minimizes wear

User questions & answers

Question:	Is there an exploded view of componets? Compressor will go to 40 lbs and no further. Where do you start looking to replace parts to resolve? Thanks
Answer:	Yes it should be able to do that. But it may take a little bit of time though.
Question:	Has anyone any experience with changing the oil to a full synthetic? If so, what weight oil
Answer:	Got this right from the CH website specific to this compressor.....At 68 dBa this compressor offers a quiet work environment
Question:	what brand and weight air compressor oil should I use
Answer:	DC080510 compressor is 1 hp.
Question:	I love Makita tools. But "Low AMP draw" is a suspiciously weaselly way to state power consumption. WHAT IS the EXACT MAX AMP draw
Answer:	Este compresor no se usa para pintar.

Product features

Makita MAC2400 2.5 HP* Big Bore Air Compressor

Makita’s 2.5HP Air Compressor is equipped with Makita’s Big Bore engineered pump cylinder and piston for higher output for two nailers, with less noise and improved job site performance. The MAC2400 delivers industrial power and results with improved durability for tough job site conditions.

2.5 HP with Big Bore Engineered Pump

The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. The MAC2400 has an oil lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The Big Bore oil-lubricated pump is also more efficient: the MAC2400 runs cooler and at half the RPM of most competitive units, resulting in greater motor and pump life and lower noise.

Jobsite Ready

The 4.2 gallon twin-stacked tank sustains an operating pressure of 130 PSI, and delivers 40 PSI (4.8 CFM) and 90 PSI (4.2 CFM), enough for two nailers. The low AMP draw reduces instances of tripped breakers and voltage drop that can cause premature motor failure. The roll bar handle provides portability and additional protection, helping it withstand harsh jobsite environments. Additional features include a convenient oil drain and oil sight glass, a tank drain valve that supersedes standard petcock design for easier maintenance, and finned discharge tubing that dissipates heat more efficiently.

Versatile Design for a Range of Applications

The MAC2400 is engineered for low noise, high output and less maintenance, and delivers industrial power and results with improved durability under tough job site conditions.

• HEAVY DUTY 3/4" Compressed air line Filter seperator/Particulate Filter
• 3/4" Female NPT Air Inlet port X 3/4" Female NPT Air Outlet port
• With Internal Float Drain 140 CFM Flow Rate
• 175 Max Output pressure 175 PSI Max Input pressure

User questions & answers

Question:	do you need replace the inside like once a year or just clean
Answer:	MINE DOESN'T AUTO DRAIN. I HAVE IT LOCATED ON A 6' DROP, 15' FROM THE COMPRESSOR AND EVEN HAVE THE LINE GOING UP 6' BACK TO THE CEILING. I STILL GET MOISTURE IN MY LINES AND HAVE TO MANUALLY EMPTY IT
Question:	What is the psi rating of the unit? (inlet / outlet
Answer:	The shower wand is stainless steel . The entire combo is the same color
Question:	What is the warranty
Answer:	I’m not sure. I bought this one and it’s great but not enough power on the hand held wand.
Question:	When does it auto drain? water level or pressure drop? i have the f700a and it hasn't drained yet
Answer:	The product description says that the pressure balance valve has anti-hot function. And they also sell the thermostatic system and they have better anti-hot function. I am currently using it. If you need a real anti-hot shower system, I suggest you buy the thermostatic shower system.

Product description

The Bostitch CAP1512-OF 1.2 Gallon Oil-Free High-Output Trim Compressor has a high-output oil-free pump that delivers 2.8 CFM @ 90 PSI and 150 PSI max operating pressure for multiple finish tool operations. The 2.0 HP (Peak), 1.5 HP (Running) motor draws 12 amps for easy start up without tripping circuit breakers. The 1.2 gallon compact design only weighs 23.5 lbs. for easy portability to and from a jobsite. It has an integrated control panel with roll cage that protects gauges from jobsite damage. The LED ON/OFF switch lets you know when the compressor is on to eliminate low-pressure misfires. It has on-board tool and hose storage and a convenient storage pocket for hand tools, fasteners and fittings. The integrated cord wrap improves portability. It also has integrated no-marring rubber feet.

• High-output oil-free pump delivers 2.8 CFM @ 90 PSI and 150 PSI max operating pressure for multiple finish tool operation
• 2.0 HP (Peak), 1.5 HP (Running) motor draws 12 amps for easy start up without tripping circuit breakers
• 1.2 gallon compact design weighs 23.5 lbs. for easy portability
• Integrated control panel with roll cage protects gauges from jobsite damage
• LED ON/OFF switch lets you know when the compressor is on to eliminate low-pressure misfires

User questions & answers

Question:	I am looking for an air compressor mainly for filling bike tires and pool toys, maybe occassionally car tire. Would this be the size and quality I need
Answer:	Pretty much this is your gadget. Excellent for inflating small toys, bike tires in a few seconds. With car tires, inflation from zero pressure can be accomplished, but not recommended routinely. For top ups of under inflated auto tires, this is your handy tool. The storage tank holds enough for a remote inflation if a power supply is not available. Just remember to drain the storage tank of air when you are finished for the day!!Darin
Question:	Is this product powerful enough to use on removing nuts on car /truck wheels
Answer:	Absolutely YES as I've done it...Depending, you might need to wait a couple seconds between wheels but it will technically do it...Of course it would be way too under powered (not enough cfm) to be used in a shop type atmosphere...Which is why I imagine a few have answered no, but you have to remember that cfm ratings are based on continuous use so short blasts obviously don't need as much cfm...This compressor pumps back up from 120 to 150 psi in about 10 seconds, so even if you had to wait, it would only be a few seconds...Plenty good for a DIY... kd
Question:	does this compressor work for sandblasting
Answer:	you need to first find the requirements of the sandblast uint, then choose a compressor.but this unit is so small that only a jeweler would use it for sandblasting.
Question:	sprinkler
Answer:	umbrella

Product features

Compact and Useful

Although the BOSTITCH Air Compressor is lightweight that weighs 23.5 lbs., and a compact design of 1.2 gallon, the performance of the tool speaks for itself. The size of the tool with the Integrated cord wrap is what gives it the portability feature. The compressor consists of a high-output oil-free, maintenance-free pump that delivers 2.8 SCFM* @ 90 PSI and a maximum tank storage pressure of 150 PSI. This makes it the perfect partner for use with finish nailers and staplers for applications such as installing trim, baseboard, door frames, cabinets, or window casings.

In-built features for protection of the Air Compressor

The Air Compressor has an in-built Control Panel to protect the gauge from any damage that might occur at the site. LED On/Off switch lets you know when the compressor is on to eliminate low-pressure misfires.

Product description

Compressed air filters, also known as line filters, remove contaminates from the compressed air leaving a screw or piston compressor, which often has a high water content and concentration of oil or other contaminants. Compressed air in-line filters extend the life of your tools and equipment down stream. Excess moisture collects in the quick release 1/4 turn metal bowl with. Manual drain. Heavy duty type -- High Air flow and drain capacity. Transparent water level indicator for easy checking. Suitable for any 3/4" high flow air pressure equipment or system. FOR REPLACEMENT 5 MICRON FILTER ELEMENTS. COPY AND PASTE ASIN TO YOUR AMAZON SEARCH B01N7VEJ2V

• HEAVY DUTY 3/4" FEMALE NPT IN LINE COMPRESSED AIR PARTICULATE FILTER MOISTURE TRAP
• 250 PSI MAX INPUT PRESSURE, 215 MAX OUTPUT PRESSURE, WALL MOUNTING BRACKET INCLUDED
• 5 OUNCE METAL BOWL WITH VISIBLE SIGHT GLASS, 140 SCFM FLOW RATE
• 5 MICRON FILTER ELEMENT REMOVES 95% MOISTURE, DEBRIS AND CONTAMINANTS
• 3/4" NPT OUTSIDE THREAD DIAMETER IN INCHES 1.05"

User questions & answers

Question:	Can the filter be cleaned an reused
Answer:	I was wondering what is the part number to be able to buy the replacement filters
Question:	Does this unit automatically drain when the air pressure is shut off to the system
Answer:	This regulates the pressure and removes water.
Question:	Is input/output directional or can it be used either way
Answer:	I have no idea about replacement parts for this unit. You would be better off to buy an entire new unit. Then salvage wht you have-such as the pressure indicator etc.
Question:	Replacement elements for this unit
Answer:	Yes there are threaded ports opposed so flow can go either direction

Product description

ADJUSTABLE FROM 7 PSI TO 215 PSI, 140 SCFM FLOW RATE A pressure regulator's primary function is to match the flow of gas through the regulator to the demand for gas placed upon it, whilst maintaining a constant output pressure. If the load flow decreases, then the regulator flow must decrease also. If the load flow increases, then the regulator flow must increase in order to keep the controlled pressure from decreasing due to a shortage of gas in the pressure system. High pressure gas from the supply enters into the regulator through the inlet valve. The gas then enters the body of the regulator, which is controlled by the needle valve. The pressure rises, which pushes the diaphragm, closing the inlet valve to which it is attached, and preventing any more gas from entering the regulator. The outlet side is fitted with a pressure gauge. As gas is drawn from the outlet side, the pressure inside the regulator body falls. The diaphragm is pushed back by the spring and the valve opens, letting more gas in from the supply until equilibrium is reached between the outlet pressure and the spring. The outlet pressure therefore depends on the spring force, which can be adjusted by means of an adjustment knob.

• HEAVY DUTY 3/4" FEMALE NPT IN LINE COMPRESSED AIR PRESSURE REGULATOR.
• 250 PSI MAX INPUT PRESSURE, 215 MAX OUTPUT PRESSURE, WALL MOUNTING BRACKET & GAUGE INCLUDED.
• ADJUSTABLE FROM 7 PSI TO 215 PSI, 140 SCFM FLOW RATE.
• HIGH IMPACT LOCKING COMPOSITE KNOB.
• 3/4" NPT OUTSIDE THREAD DIAMETER IN INCHES 1.05" LINEAR.

User questions & answers

Question:	Does this regulator keep the pressure regulated even when there is no air flow, or does it allow the pressure to equalize
Answer:	This regulator keeps the pressure at your setting, unless of course the source of the pressure is reduced to below the setting. I used this regulator on an Ingersoll Rand gas compressor (2475F13GH). It maintains my set pressure at all times until I shut the engine off and open the drain valve on the tank.
Question:	How wide is the unit I only have about 1 3/4” to fit between line and tank inlet
Answer:	The width is 2.75” so this will not fit in your scenario.
Question:	I connecte the regulator to the air compressor and I have pressure but the needle won’t move from zero. Anyone know how I can fix this
Answer:	the gauge is defect, please contact your seller for the replacement gauge
Question:	mine isn’t working correctly it has 150 psi going in and the gauge says it has 150 psi and nothing comes outp
Answer:	Be sure you have the supply line connected to the port labeled “IN” if you connect this backward it will give the symptoms you are describing

Product description

The Craftsman 6 gallon air compressor features an oil-free pump for maintenance-free operation and a long life. It is lightweight and portable at 30lbs, and features a long runtime and quick recovery.

• 6 gallon pancake maximizes portability and stored air
• Durable, oil free pump for long life and no maintenance
• 150 max PSI to ensure adequate cut in pressure for a variety of applications
• 2.6 SCFM @ 90 PSI allows for quick compressor recovery time. Voltage - 120 volt
• Easily starts up in cold weather
• 13 piece accessory kit includes: 25' X 1/4inches Pvc air Hose with coupler and plug assembled, tire chuck with plug, blow gun with plug, tire gauge, blow gun with OSHA safety nozzle, rubber tip, three inflator adaptors
• 1 year limited warranty, refer to "warranty & support" section below for full details

User questions & answers

Question:	Is this made by black and decker? what lind of gears does it have? are they vynil
Answer:	Three.but have adapter to use 2 holes.
Question:	Is this unit built in the U.S
Answer:	No it doesn’t come with it. You have to buy it separately. You can get it from Home Depot.
Question:	What is the noise rating on this? Is it louder than comparable brands
Answer:	Yes it connects to an air compressor.
Question:	How many amps? Need to know if it will trip my standard 15 outlets or if it needs to run on a 20 amp outlet
Answer:	I will use Amazon when I need them. Just purchased product so do not need one now.

Product description

The Viair 88P is a small portable compressor capable of inflating up to 33-inch tires using a direct battery connection with two battery terminal clamps. Tire pressure can be monitored using the gauge mounted on top of the unit, by temporarily switching the unit off. User manual information on color box, use color box for storage. Maximum Ambient Temp: +158 degree fahrenheit and Minimum Ambient Temp: -4 degree Fahrenheit.

• 12 VOLT - 120PSI Max Working Pressure, engine must be running during use.
• 1.47CFM Free Flow @ 0 PSI.Max. Amp Draw: 20 Amps
• Portable air compressor powered via alligator clamps direct to battery.
• Good for small ATVs, trucks, SUVs, and sedans with up to 33" Tires.
• LED/Power indicator, 10 Ft. Power Cord, 16 Ft. Air Hose, 3pc Inflation Tip Kit

User questions & answers

Question:	Is there a way I could use this to fill a bigger (4.7 gallon) air tank
Answer:	The one I had only last one use and that was i, don’t buy it!
Question:	Is the fuse for this unit easily replaceable? I noticed in other Viair products there was a fuse about midway down the power cord, is this the same
Answer:	This air compressor is not equipped for ac current.
Question:	Viair's website says it has a 16 ft air hose, Amazon says 12 ft. which is it
Answer:	On the outside of the box it states “ made in China “. I was amazed because all documents were in English and well written with clear and precise wording and clear picture diagrams of all parts. This is very unusual! The booklet was written in letters you did not have to magnify to read. I needed a portable air supply for off road driving where I can deflate my tires and then re-inflate the tires. I had a picture of the box but they gave me no way to attach the photo, sorry!
Question:	What do you use an air compressor for
Answer:	Miele uses 36mm hose/attachments. They do make adapters. With small inexpensive adapter it works with our Miele and should work with yours.

Product features

Portable Compressors for Tire Inflation

Our 12V portable compressors can be used by anyone who owns a car!

Since it is recommended to check, and maintain, your tire pressure monthly these compressors make it easy for you to do that without having to go to gas stations.

We recommend checking and inflating your tires before you start driving for the day, when the tires are cold, since heat will expand the tires.

Proper tire pressure is important because:

Product description

The CALIFORNIA AIR TOOLS 4610AC Ultra Quiet & Oil-Free Air Compressor is designed to be one of the quietest air compressors in the industry having only 60 decibels of sound. The powerful 1.0 HP (SP-9413) motor operates at only 1680 RPM creating less noise and less wear. The "New" SP Series of Ultra Quiet Air Compressor Motors have been designed to increase duty cycle and allow for longer continuous run times. The Oil-Free Dual Piston Pump System is engineered for high performance and durability. The CAT-4610AC Air Compressor has a Oil-Free Dual Piston pump designed to have a life cycle before wear of 3000 Plus hours compared to other comparable air compressors with life cycles of 500 hours or less. The Oil-Free pump allows for use in a variety of temperatures and uneven terrains. The 4.6 Gallon Aluminum (Rust-Free) Air Tank is Lightweight (45.5 lbs) and very easy to transport. This air compressor is ideal for anyone working inside where noise is a major issue.

• Ultra Quiet only 60 Decibels
• Oil-Free Pump for Less Maintenance & Costs
• 4.6 Gallon (Rust Free) Aluminum Twin Tank
• Powerful 1.0 HP (Rated / Running) 2.0 HP (Peak) Motor
• 3.10 cfm @ 40 psi - 2.20 cfm @ 90 psi

User questions & answers

Question:	How many scfm is this air compressor
Answer:	The label on my bottle of Flax Oil reads: Serving Size: 3 Softgels There are <0.5 grams is saturated fat in each serving 2% of the daily value Under the Suggested Uses of the label it states, each serving may also have the naturally occurring amounts of..............Other (Saturated) 12% I suppose that could be interpreted as 14% fat per serving.
Question:	Si necesito los tubos donde está el regulador
Answer:	The flax oil is vegetarian. But the capsules are made from gelatin (among other ingredients), a by-product of meat/fish processing. I don't know whether another company offers vegetarian capsules.
Question:	Will this run two framing nailers
Answer:	There is nothing on the container that says made in China. The manufacturer is Now Foods Bloomington, IN.
Question:	My shop gets very cold in winter, sometimes <0 f, is that a problem
Answer:	not good... completely different from the regular miracle noodles. according to the directions, you don't have to boil them, you can steep them in hot water. i tried this and they did not seem to get cooked. probably better off boiling them. these noodles are short and stiff, and after I prepared them according to the directions they remained somewhat hard/they did not fully soften. these noodles were a complete waste of money.

Product features

California Air Tools 4610AC

The California Air Tools 4610AC Ultra Quiet & Oil-Free Air Compressor is designed to be one of the quietest air compressors in the industry having only 60 decibels of sound. The powerful 1.0 HP (SP-9413) motor operates at only 1680 RPM creating less noise and less wear. The 'New' SP Series of Ultra Quiet Air Compressor Motors have been designed to increase duty cycle and allow for longer continuous run times. The Oil-Free Dual Piston Pump System is engineered for high performance and durability. The CAT-4610AC Air Compressor has a Oil-Free Dual Piston pump designed to have a life cycle before wear of 3000 Plus hours compared to other comparable air compressors with life cycles of 500 hours or less. The Oil-Free pump allows for use in a variety of temperatures and uneven terrains. The 4.6 Gallon Aluminum (Rust-Free) Air Tank is Lightweight (45.5 lbs) and very easy to transport. This air compressor is ideal for anyone working inside where noise is a major issue.

SP-9413

Ultra Quiet Only 60 Decibels.

Oil-Free Pump

Cleaner Tool Operation.

Less maintenance and Costs.

Dual Piston Pump.

SP-9413

2.20 CFM @ 90 PSI.

3.10 CFM @ 40 PSI

Low Amp Draw.

8.5 amps

Thermal Overload Protector.

CAT-4610AC

4.6 Gallon (Rust Free) Twin Tank.

Only 45 Pounds

Easy to Transport.

Two Quick Hose Connectors

Good for many high air tools.

California Air Tools 4610AC Ultra Quiet Air Compressor

Powerful 1.0 Hp Air Compressor.

Product description

Portable Air Compressor is the perfect companion to all of your air tools. With its 10 Gal. air tank and low profile stable design, it is ideal in almost any situation, whether it is on the top of a roof or on the other side of the garage. It can run 7.2 CFM @ 40 PSI / 3.5 CFM at 90 PSI, with a maximum of 125 psi. The motor on this compressor is a high-efficient, cold start twin capacitor induction motor with thermal overload protection

Feature:

• Boasting a maximum PSI of 125, the compressor is ideal for a variety of projects including nailing, bolting, stapling, fastening, hobby painting, and inflation
• Cast iron pump with big bore cylinder and piston is engineered to provide faster recovery time for improved performance
• Large automotive style industrial air filter for increased air intake and greater efficiency. Durable cast iron cylinder reduces wear and increases pump life; removable for easy maintenance
• 50% quieter than comparable units, you can use this compressor indoors without worrying about noise!
• Combined with the portable 10 gallon horizontal tank, the unit was designed for a user-friendly experience
• Automatic shutoff stops pumping air when the object is fully inflated for safety
• Low AMP draw reduces incidences of tripped breakers at start up

Specifications:

• Type: Portable Air Compressor
• Voltage: 120V/60HZ
• Air Capacity: 10 Gallon
• Power: 3.5 Peak HP
• Number of Coupler: 2
• Maximum Pressure: 125 PSI
• Wheel Diameter: 10"
• Rating: 7.2 CFM @ 40 PSI / 3.5 CFM at 90 PSI

Package Contents:

• Portable Air Compressor
• Manual

• 0%/0%/0%
• Imported
• Boasting a maximum PSI of 125, the compressor is ideal for a variety of projects including nailing, bolting, stapling, fastening, hobby painting, and inflation.
• Automatic shutoff stops pumping air when the object is fully inflated for safety
• It 50% quieter than comparable units, you can use this compressor indoors without worrying about noise
• Combined with the portable 10 gallon horizontal tank, the unit was designed for a user-friendly experience
• Large automotive style industrial air filter for increased air intake and greater efficiency. Durable cast iron cylinder reduces wear and increases pump life; removable for easy maintenance

User questions & answers

Question:	Dose this compressor use oil
Answer:	Yes , 30w compressor oil !
Question:	Puede usarse para pintar autos
Answer:	No lo recomiendo, tiene un tanque muy pequeño
Question:	What brand the compressor is
Answer:	I honestly don’t know, all I know is that it runs well and is fairly quiet
Question:	What's the CFM
Answer:	But, it only deliver 3.5 CFM @ 90 PSI which is where most compressors are compared. There is another vertical compressor listed for around $180 that runs at 2.5 HP and delivers almost twice (6.5)the CFM at 90 PSI. If you run nail guns, best check further.

Product description

Cast iron pump with Big Bore cylinder and piston, combined with greater bore and stroke, delivers maximum performance. Substantially lower noise levels with a large 1,720 - RPM pump-enabling greater displacement at lower RPM. Reduces incidences of tripped breakers and voltage drop that can cause premature motor failure. Cooler running pump, minimizes wear. Specs: Horsepower: 2.0; Pump: Oil-lubricated; Tank (gal.): 2.6 Hot Dog; Performance (CFM): 90 PSI: 3.3, 40 PSI: 3.8; Operating Pressure (PSI): 0 - 130; AMPS: 12.4; Noise level (dB): 80; Size: 18"x10"x22"; Net Weight (lbs.): 52. Includes: 1/4" Brass Makita universal coupler.

Makita's 2.0 HP Air Compressor is equipped with Makita's Big Bore engineered pump cylinder and piston for higher output, less noise and improved job site performance. The MAC700 delivers industrial power and results with improved durability under tough job site conditions.

2.0 HP with Big Bore Engineered Pump

The MAC700 is powered by a 2.0 HP motor. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. The MAC700 has an oil-lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The Big Bore oil-lubricated pump is also more efficient: the MAC700 runs cooler and at half the RPM of most competitive units, resulting in greater motor and pump life and lower noise. The 2.6-gallon tank sustains an operating pressure of 130 PSI, and delivers 40PSI (3.8 CFM) and 90 PSI (3.3 CFM). The low AMP draw reduces instances of tripped breakers and voltage drop that can cause premature motor failure. The roll bar handle provides portability and additional protection, helping it withstand harsh jobsite environments. Additional features include a convenient oil drain and oil sight glass, a tank drain valve that supersedes standard petcock design for easier maintenance, and finned discharge tubing that dissipates heat more efficiently.

Versatile Design for a Range of Applications

The MAC700 is engineered for low noise, high output and less maintenance, and delivers industrial power and results with improved durability under tough job site conditions. The MAC700 is just another example of Makita's commitment to innovative technology and best-in-class engineering.

About Makita Big Bore Air Compressors

Makita Big Bore Air Compressors deliver higher output and less noise for improved job site performance. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. All Makita Big Bore Air Compressors are oil lubricated and equipped with large automotive style filters for increased air intake and greater efficiency. Makita Big Bore Air Compressors deliver industrial power and results with improved durability.

About Makita

Makita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.

Warranty

Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. Please see makitatools.com for complete details.

What's in the Box

Makita MAC700 2.0 HP Air Compressor, oil and 1/4-inch universal quick coupler.

• Cast iron pump with big bore cylinder and piston, combined with greater bore and stroke, delivers maximum performance
• Substantially lower noise levels with a large 1,720 RPM pump, enabling greater displacement at lower RPM
• Low amp draw reduces incidences of tripped breakers and voltage drop that can cause premature motor failure
• Oil lubricated provides cooler running pump, minimizes wear
• One-year manufacturer's warranty

User questions & answers

Question:	impact
Answer:	Question or statement? I would say it would make a pretty big impact due to its heavy mass if you dropped it. If your referring to an impact wrench Yes it does work for it for a short amount of time, 8-10 seconds. I can usually get a wheel off right before it kicks in. I've removed strut towers and seized axle bolts with this too, you just have to hit it a few times.
Question:	can you use it with a framing nailer
Answer:	I've used it to frame a 12x24 workshop and it performed perfectly. I generally keep it at around 100 psi, but it can be raised to 150 psi for tools that require the higher pressure. I have had no trouble at all with intermittent (trigger-operated) tools of any sort.
Question:	Will this work with a LVLP sprayer
Answer:	I don't see why it would not work. The tank is only 2.6gal so keep that in mind. It delivers 3.8 cfm @ 40psi and 3.3 cfm @ 90psi. I have to believe your application fits somewhere in the middle of these.
Question:	What is its noise decibel number
Answer:	I don't know the actual number, but I will say it's the quietest compressor I've ever heard. I use mine in the garage with all the doors closed and can still have a normal conversation or listen to the shop radio. That, honestly, was the main reason I bought it. I had a Craftsman that could shake the dishes off their shelves in the kitchen when running and it would walk across the shop floor to where it could almost unplug itself. The Makita stays put. Most of my shop tools are Makita and I have never been disappointed. My cordless drill/screw gun I bought in 1986 and it still works every day. I think you will be very happy with this compressor.

Product features

Makita MAC700 2.0 HP Big Bore Air Compressor

Makita’s 2.0 HP Air Compressor (MAC700) is equipped with Makita’s Big Bore engineered pump cylinder and piston for higher output, less noise and improved jobsite performance. The MAC700 delivers industrial power and results with improved durability for tough job site conditions.

The MAC700 is engineered for low noise, high output and less maintenance, and delivers industrial power and results with improved durability under tough job site conditions.

Product description

The California Air Tools Light & Quiet 1P1060S portable air compressor is designed to be one of the quietest air compressors in the industry having only 56 decibels of sound. The 0.6 HP motor operates at only 1680 RPM creating less noise and less wear. The new "IP" ultra quiet & Oil-Free motor is a single piston pump design is engineered for high performance and durability. The 1.0 gallon steel air tank is lightweight (29 lbs) making it very easy to transport. The 1P1060S air compressor has a Oil-Free single piston pump designed to have a life cycle before wear of 3000 Plus hours compared to other comparable air compressors with life cycles of 250 hours or less. The Oil-Free pump allows for use in a variety of different temperatures (cold) and uneven terrains the 1P1060S produces 1. 2 CFM @ 90 PSI allowing you to use Staple guns, Brad nail guns, finish nail guns, nail guns, airbrushes and blow guns. This air compressor is great for the garage and perfect for cleaning and inflating tires, beds, toys and sport balls. This air compressor is ideal for anyone working inside where noise is a major issue.

• Ultra quiet only 56 Decibels
• Oil-Free pump for less maintenance & costs
• Lightweight for easy transporting - 29.5 lbs
• 1.0 gallon steel tank
• Powerful 0.6 HP (rated / running) - 1.20 CFM @ 90 PSI
• Ultra quiet only 56 Decibels
• Lightweight for easy transporting - 29.5 lbs

User questions & answers

Question:	What is the maximum psi for this unit. I need it to go up to 150 psi. Does this unit do that
Answer:	Yes, you can replace the fans with any 120mm case fans simply by removing the fan from the bracket.
Question:	what do I need to buy to be able to use iwata airbrushes
Answer:	Yes you can use it and does not cover any ram slots you will have half an inch clearance.
Question:	how many inches tall is this compressor
Answer:	Yes
Question:	I've read review reports of debris (metal pellets) in the tank. Has this been resolved
Answer:	Yes

Product features

California Air Tools "Light & Quiet" 1P1060S

The California Air Tools Light & Quiet 1P1060S Portable Air Compressor is designed to be one of the quietest air compressors in the industry having only 56 decibels of sound. The .6 HP motor operates at only 1680 RPM creating less noise and less wear. The New 'IP' Ultra Quiet & Oil-Free Motor is a Single Piston Pump design is engineered for high performance and durability. The 1.0 Gallon Steel Air Tank is Lightweight (29 lbs) making it very easy to transport. The 1P1060S Air Compressor has an Oil-Free Single Piston pump designed to have a life cycle before wear of 3000 Plus hours compared to other comparable air compressors with life cycles of 250 hours or less. The Oil-Free Pump allows for use in a variety of different temperatures (cold) and uneven terrains The 1P1060S produces 1. 2 CFM @ 90 PSI allowing you to use staple guns, brad nail guns, finish nail guns, nail guns, airbrushes and blow guns. This air compressor is great for the garage and perfect for cleaning and inflating tires, beds, toys and sport balls. This air compressor is ideal for anyone working inside where noise is a major issue.

CAT-1P1060S

Less noise than a conversation.

Oil-Free

Less Maintenance, Clean Air, Use in Cold Temps.

Lightweight

Only 20 Pounds.

California Air Tools Light & Quiet 1P1060S Portable Air Compressor

1.2 HP Peak.

1.0 Gallon Steel Tank

Only 29 Pounds.

1.60 CFM @ 40 PSI

1.20 CFM @ 90 PSI.