14 best 20 cfm air compressors

Product description

The CALIFORNIA AIR TOOLS 10020C Ultra Quiet & Oil-Free Air Compressor is designed to be one of the quietest 2.0 Hp air compressors in the industry having only 70 decibels of sound. The Powerful "New" 2.0 HP (SP-9421) motor operates at only 1680 RPM creating less noise and less wear. The "New" SP Series of Ultra Quiet Air Compressor Motors have been designed to increase duty cycle and allow for longer continuous run times. The Oil-Free Dual Piston Pump System is engineered for high performance and durability. The CAT-10020C Air Compressor has an Oil-Free Dual Piston pump designed to have a life cycle before wear of 3000 plus hours compared to other comparable air compressors with life cycles of 500 hours or less. The Oil-Free pump allows for use in a variety of temperatures (cold starts) and uneven terrains (no oil in the pump). The Easy Start Valve feature allows for a easier start up using less starting amps. The Easy Start Valve releases a small amount of air from the pump at start up to produce a no-load condition allowing the motor to spin freely. This no-load start up requires less amps for an easier start up in cold temperatures. The large 10 Gallon Steel Air Tank with wheel kit makes it very easy to move around the jobsite, shop or garage. Designed for the person looking for Power, Air Flow, Less Service and Maintenance with at Least 30% Less Noise!.

• Ultra Quiet, only 70 Decibels
• Oil-Free Pump for Less Maintenance & Costs
• Powerful 2.0 Hp with Low amp draw - 7.0 Amps
• 6.40 CFM at 40 PSI & 5.30 CFM at 90 PSI. Dedicated 15 amp outlet -14 gauge 25ft cord - Min. 5500 Watt Generator. Maximum continuous running 30-60 min. (Depending PSI & CFM)
• 10 Gallon Air Tank with Wheels.125 PSI maximum pressure
• Dimensions: 16" L x 15.1" W x 35.9" H

User questions & answers

Question:	My air compressor has stopped working how do I get warrantied
Answer:	Yes, Harbor freight.
Question:	i don't see a drain valve. how does it drain
Answer:	Imcompatible with V style coupler.
Question:	Where is this product made
Answer:	Air direction does not matter so you can combine two compressors. The issue I had trying to do sandblasting with 1/4" connectors is going to be flow rate. Most 1/4" connectors are only passing around 32-40 CFM. Even with two good sized compressors I wasn't getting the air flow I needed. A holding tank near the blaster and 3/8" lines helped a lot.
Question:	Is there any power benefit for going 240v such as more CFM
Answer:	Do not use this with a pressure washer. This item, like all pneumatic equipment, is not rated for much more than a few hundred psi. Your pressure washer almost certainly goes higher than this.

Product features

California Air Tools 10020C

The CALIFORNIA AIR TOOLS 10020C Ultra Quiet & Oil-Free Air Compressor is designed to be one of the quietest 2.0 Hp air compressors in the industry having only 70 decibels of sound. The Powerful 'New' 2.0 HP (SP-9421) motor operates at only 1680 RPM creating less noise and less wear. The 'New' SP Series of Ultra Quiet Air Compressor Motors have been designed to increase duty cycle and allow for longer continuous run times. The Oil-Free Dual Piston Pump System is engineered for high performance and durability. The CAT-10020C Air Compressor has an Oil-Free Dual Piston pump designed to have a life cycle before wear of 3000 plus hours compared to other comparable air compressors with life cycles of 500 hours or less. The Oil-Free pump allows for use in a variety of temperatures (cold starts) and uneven terrains (no oil in the pump). The Easy Start Valve feature allows for a easier start up using less starting amps. The Easy Start Valve releases a small amount of air from the pump at start up to produce a no-load condition allowing the motor to spin freely. This no-load start up requires less amps for an easier start up in cold temperatures. The large 10 Gallon Steel Air Tank with wheel kit makes it very easy to move around the jobsite, shop or garage. Designed for the person looking for Power, Air Flow, Less Service and Maintenance with at Least 30% Less Noise!

SP-9421

Ultra Quiet - 70 Decibels.

Oil-Free

Cleaner air for better tool operation.

Less maintenance and Costs.

Dual Piston

Faster Air Delivery.

SP-9421

6.40 CFM @ 40 PSI

5.30 CFM @ 90 PSI

Low Amp Draw

14 Amps

Thermal Overload Protector

Over Heating Protection.

CAT-10020C

Only 70 Decibels

10 Gallon Steel Tank

10 Gallon Steel Air Tank With Wheel Kit.

Easy to move around.

Complete Control Panel

Easy to Use Controls.

California Air Tools

The Largest Manufacture of Ultra Quiet, Oil-Free and Lightweight Air Compressors.

To provide the Highest Quality Products with the Latest Innovations is our Mission.

Product description

This heavy-duty NorthStar compressor is built with a durable cast iron V-twin pump with cast iron heads for good heat dissipation and no transfer of heat between cylinders. Belt drive oil-lubricated pump runs quietly and delivers long pump life. Built tough enough for commercial shops. Enough capacity to operate an air ratchet, impact wrench, siphon feed sand blaster, nibbler, nailer, air brush, touch-up spray gun and more. Includes portability kit with no-flat tires. Volts: 115/230, Air Tank Size (gal.): 20, Max. PSI: 135, Portable or Stationary: Portable, Stage: Single, Motor Phase(s): 1, Tank Type: Horizontal ASME, Dimensions L x W x H (in.): 43 x 22 x 30, Pump Life (hrs.): 5,000, Pump: Cast iron, oil-lubricated, 2-cylinder, Noise Level (dB): 80, CFM at 90 PSI: 5.0, Drive: Belt, HP: 2, Working Pressure (PSI): 135, Amps: 15/7.5, Duty Cycle: 100%, CFM at 135 PSI: 4.2, Drain System: Manual, CFM at 40 PSI: 6.0, Air Outlet Size (in.): 3/8

• 2 HP 115V/230V 15/7.5 Amp dual voltage induction motor
• 2-cylinder cast iron single-stage pump
• Delivers 5.0 CFM @ 90 PSI; 6.0 CFM @ 40 PSI
• Copper finned inter- and after-coolers provide effective heat dissipation and less moisture
• Ball bearings on each side of crankshaft for smooth running and durability

User questions & answers

Question:	Can you wire the motor for 220 volts single phase
Answer:	This NorthStar compressor will come wired for 115 volts and can be re-wired for 220 volt.
Question:	I mostly use it for painting, blow gun, sometimes dual action sander, or die grinder, air drill, sandblast. I'm also concerned about the noise level
Answer:	Might need larger capacity. The noise level is very reasonable.
Question:	Is this gas powered
Answer:	No this is electric. Search for gas powered air compressors.
Question:	how odoes this fair with die grinders/sanders and maybe light hvlp painting
Answer:	I would suggest a larger compressor. I really love mine and have had no issues. But it runs a lot when I am using my die grinder or palm sander. I added a 60 gallon tank that I already had. It is much better with the added volume.

Product features

Superior Design for Industry-Leading Pumps

Engineered for Durability

The last thing you want to worry about is your compressor breaking down in the middle of a job. The NorthStar 2 HP, 20-Gallon Horizontal Air Compressor has been engineered with superior technology to keep you working without interruption. The durable cast iron V-twin pump has oil lubrication and cast iron heads for long service life. Bearings are placed on both ends of the pump’s crankshaft for superior support and less wear and tear.

Longer Pump Life

Heat can be a powerful enemy to the longevity of your air compressor pump. That’s why this NorthStar 2 HP, 20-Gallon Horizontal Air Compressor has been engineered with a V-style cylinder orientation to eliminate hotspots and provide consistent cooling, resulting in longer pump life. Copper finned inter- and after-coolers provide effective heat dissipation and less moisture. The pump cylinders, heads and crankcase are made of cast iron for extra-long service life.

Portable Compressed Air At Your Command

Portable and Versatile

The NorthStar 2 HP, 20-Gallon Horizontal Air Compressor comes equipped with a portability kit with smooth-rolling steel ball bearing wheels and no-flat tires, so you can maneuver this powerful compressor right next to your work area or project. This quiet unit is great for automotive and home repairs and has plenty of power to operate impact wrenches, nailers, ratchets and other air tools. It’s an ideal compressor for the serious do-it-yourself homeowner or tough enough to use in a small commercial repair shop.

Product description

DeWalt 20-gallon air compressor features a cast iron, twin cylinder, oil lubricated pump with a one-piece cast iron crankcase, thermally stable cast iron cylinder body, aluminum head & valve plate, automotive style ball bearings, durable Swedish stainless steel reed valves, oil level sight glass, easily accessible oil fill and a 12" cast iron balanced flywheel. Compressor has a heavy duty induction motor for maximum performance and efficiency with 1.9 RHP.

• 7.0 CFM at 40 psi and 5.7 CFM at 90 psi
• 155 PSI max pressure for optimum tool performance
• 20 gallon ASME* portable tank with pre-attached pneumatic tires for maximum portability
• Dual voltage motor is wired for standard 120 volt outlet and may also be converted for 240 volt application
• Equipped with quick-set regulator, tank and working pressure gauges and on/off switch

User questions & answers

Question:	Is this model 1 or 2 cylinders on the compressor of the unit
Answer:	This compressor has two cylinders.
Question:	What are the thread size on the outlet on the compressor if you decide to take the coupler off and put a different one on there
Answer:	1/4” NPT
Question:	I am confused. Is this a electric unit or gas unit?. Is says gas on the specs but saw some said it has an electric wire
Answer:	It has a Dual voltage motor that is wired for a standard 120 volt outlet and may also be converted for 240 volt application. It is "electric".. If you look at the picture, you can clearly see that is is not "gas" powered. Just "click" on the model ## under the picture.
Question:	What is the small line for from the pressure regulator to the tank line coming from the tank
Answer:	It's an air line.

Product features

DEWALT 20 Gallon Oil Lubricated Air Compressor

Features and Benefits:

Efficient and Reliable

The cast iron, twin cylinder pump featuring an aluminum head & valve plate helps ensure faster heat dissipation.

The high flow regulator supplies 20% more torque for projects like removing stubborn nuts and bolts.

The heavy duty dual voltage induction motor is able to drive high pump performance which helps to ensure trouble-free operation.

Easy Operation

The on-board controls offer quick access to high flow regulator, tank & tool pressure gauges, quick connect air outlet, and on/off switch for easy of use.

Maximum Portability

Pneumatic wheels and a small footprint allows for excellent mobility.

A handle offers easy transportation to various job sites.

DXCMPA1982054 - DEWALT 20 Gallon

The DEWALT 1.9 HP 20 Gallon oil lubricated air compressor is job-site tough and built for the professional. It features automotive style ball bearings, durable stainless steel reed valves, oil level sight glass, easily accessible oil fill and a cast iron balanced flywheel for easy maintenance, maximum performance and convenience. This single-stage, oil lubricated compressor offers a V-twin cast iron pump with 1-piece cast iron crank case and thermally stable cast iron cylinder body for added durability.

The DEWALT 20 Gallon horizontal, portable air compressor delivers up to 155 PSI maximum operating pressure for longer air tool run times. Made for the serious DIY user, professional or contractor, this industry leading air compressor is perfect for high consumption air tools; nail guns, paint sprayers, sanders, and more. Fully assembled and plugs into standard 120 volt outlet and can be converted for 240 volt applications, this DEWALT 20 gallon air compressor is the perfect solution for a variety of tasks around the house and in the workshop.

Product description

The Stealth SAUQ-1105 ultra quiet and oil-free air compressor is designed to be one of the quietest 1/2 HP air compressors in the industry. At just 60 dB, this compressor offers a quiet work environment and is ideal for anyone working where noise is a major issue. Long-life cycle more than 1000 hours, oil-free, maintenance free pump for high performance and durability. This durable, Oil free pump provides extended maintenance-free operation with superior motor performance. This Stealth SAUQ-1105 is perfect for inflation, stapling, fastening and nailing. For advanced at-home projects or a portable worksite alternative, look to the 1 gallon trim finish electric air compressor from Stealth. This no-load start up requires 2.8 amps for an easier start up in cold temperatures. Finish your projects faster and easier with Stealth SAUQ-1105. From a portable 1-gallon, 1/2 HP air compress great for inflatable, stapling, fastening, nailing and bolting projects to the rugged 20-gallon, 1.8 peak HP air compress for heavy-duty use, Stealth air compressor make short work of even the toughest jobs, saving you time and effort. The air power expert. Compressor Voltage- 120



Key Specifications:

★ Noise level (dBA) < 60

★ 1 Gallon tank

★ 1/2 Peak horse power

★ Oil-free

★ Working pressure range ( 95 to 125 PSI) , max 125 PSI

★ 1.3 CFM@40PSI , 0.8 CFM@90PSI

★ AC type 120 voltage power source, with the 6 feet power cord

★ Handle type: Rubber Reinforce

★ 120V & 60Hz & 2.8A

★ Motor type: Induction

★ Drain valve：Ball valve

★ Packing size: 16.3 x 14.3 x 11.2 Inches

★ Gross weight: 29.28 Pounds



Warning Notes:

★ Limited lifetime warranty , USA local service center and toll-free line support

★ Keep this equipment away from children whom are under 16 years old

★ Hot compressor surfaces could result in serious injury

• ✅【ULTRA QUIET & 3 TIMES LONG LIFE】STEALTH innovative quiet system air compressor have been tested to be up to 80% quieter and qualify to 3 times longer life than standard induction motors
• ✅【LIGIT WEIGHT AND PORTABLE】1 Gallon capacity, only 28.8 pounds light weight, rubber Reinforce handle fit for carry to workshop jobsite and pick-up anywhere
• ✅【COLD WEATHER START & QUICK RECOVERY】Easy cold weather start and low voltage start. Peak 125 psi 0.8 CFM @ 90psi. Recover from empty tank to full only need 55 seconds
• ✅【VERSATILE AND MAINTENANCE FREE】Small air compressor with versatile usage scenarios. It have the capability to inflate the tires/ toys/ air tools/air mattress etc, Oil-free maintenance free
• ✅【WHAT YOU WILL GET】 1 x Air Compressor, 1 x 6 Feet Power Cord, 1 x User Manual, Lifetime Limited Warranty

User questions & answers

Question:	Can it be used with a powder coating Machine? And is it quite as in no noise
Answer:	I can't speak for all cheaper cameras, but what I can say is that this camera (and the NDI version which I've recently switched to using) is reliable and well-featured. Its image sensor produces a true broadcast-quality image; it even puts one of my more expensive ENG cameras to shame! Auto-adjusts to lighting conditions perfectly, meaning I don't have to spend valuable time fiddling with the settings, yet I still get a great image whether I'm working an indoor auditorium or an outdoor arena. My only nit-picky knock against this camera is that the image quality is almost too good... it doesn't block the near-IR range, and doesn't include threads that would allow me to fit a near-IR filter. It's a minor inconvenience in the work I use these cameras for, but not enough of an issue to send me to buying cameras from another vendor (yet). The bottom line is that this is as near to a professional-grade broadcast camera as you can get at this price point. If you're not needing broadcast quality - if you're just looking for something to install in a fixed location, or for simple teleconferencing where 'perfect' image quality isn't as much of a concern - a less expensive camera would probably suffice.
Question:	What is the wattage during the startup (surge)? I'm trying to determine what size inverter to use with a vehicle.. Thank you
Answer:	Yes, it does, but the remote is not very useful in streaming. The remote does, however, give you access to some important camera maintenance and set-up features (like white-balance). So, once you are experienced in streaming, you'll use both a controller and the hand held.
Question:	How long does this compressor take to get to 40 psi
Answer:	YES, HDMI, and USB work Simultaneously.
Question:	What size fittings are on this
Answer:	There are at least three different ways to control the pan-tilt-zoom on this camera. 1. As already mentioned, it comes with a small remote. This works OK if your budget is limited, but you'll be more pleased with one of the following options. 2. Through a RS-232 wire connection to a VISCA compatible PTZ controller. This provides much better camera control than the remote. Most of these controllers allow you to configure "presets" that will move and zoom the camera to predetermined positions with the simple push of a button. 3. Through an Ethernet connection to a computer running software that supports VISCA over IP. If you're planning to use this camera for livestreaming, there are many livestreaming software packages that support this protocol. This allows you to use on-screen controls to move and zoom the camera and create presets - depending on the capabilities of your chosen software, of course. For our livestreaming needs, we chose option 3 - we use a streaming software package called vMix. The camera is connected by a single Ethernet cable, and this one cable provides power to the camera (via a PoE switch), controls the pan-tilt-zoom (VISCA over IP), and provides the signal back to our streaming software (RTSP). Superb picture quality, and it works flawlessly!

Product features

Stealth 1 Gallon Ultra Quiet Air Compressor

Stealth 1 Gallon Ultra Quiet Air Compressor

Stealth Air Compressor is the perfect solution for taking on tough jobs. Portable enough to bring anywhere. You've got big jobs to do and you want it done faster, easier and quieter. We build the best with performance you can trust, support you can depend on and innovation inspired by you.

NOTE:

Never operate above maximum operating pressure of the spray gun or tool

Keep this equipment away from children whom are under 16 years old

Hot compressor surfaces could result in serious injury

Ideals For

ELECTRIC MOTOR & OIL-FREE PUMP

The motor is used to power the pump and it is equipped with a thermal overload protector. The pump compresses the air and discharge it into the tank via the piston that moves up and down in the cylinder.

AIR PRESSURE REGULATOR

The regulator is used to adjust the pressure inside the line to the tool that is being used. Turn the knob clockwise to increase the pressure and counter-clockwise to decrease the pressure.

OVERLOAD PROTECTOR

The When the button is bounced, you need to push it down before restarting. It is used to protect the machine when overloaded.

Product description

Porter Cable 20-gallon compressor features an oil free, long life induction motor and pump with a fully enclosed shroud that covers working components. Compressor is low maintenance with no need for oil checks and changes. Unit has a low voltage start up.

• 5.0 CFM at 40 psi and 4.0 CFM at 90 psi with 1.5 RHP
• 150 Max PSI; Running Horsepower: 1.5 ;Lubrication: Oil-Free Motor Typ
• 20 gallon tank/UL and CSA certified unit; Twin-V cast iron pump.Tank Material:Steel
• 7" semi-pneumatic wheels for mobility & rubber feet for stabilization
• Equipped with regulator, gauges, andquick connect.Decibel Rating (Outdoor):84 dBA

User questions & answers

Question:	If the connection to the compressor is 3/8 and the connection to the air tool(s) is 1/4, how do I connect the two? Coupler (I'm assuming
Answer:	you don't connect the two. the 3/8" they are describing is from the outlet of the compressor into the tank, and it is hard piped. you only need to work with the air chuck fitting, and it is standard 1/4" air fitting.
Question:	How many Decibels in operation
Answer:	This is 84 decibels.
Question:	Has anyone ever used this compressor with an impact wrench
Answer:	Yeah, used it many times on my vehicles. I haven't ran into any problems or tools that it can't power. I am using a better than average impact and it doesn't run out if air pulling the tires, all at once while on a lift, off my jeep.
Question:	Can it be used on its side
Answer:	Not completely on its side because the water (if hasn't been drained) can cause problem. If completely drain the water then it won't be a problem. Hope this helps.

Product features

Porter-Cable PXCMF220VW Portable Air Compressor, 20-Gallon

The Porter-Cable PXCMF220VW Portable Air Compressor features an oil-free induction motor and pump for dependable performance during continuous tool operation. This 20-gallon air compressor is low maintenance, eliminates the need for oil checks and changes, and features a longer run time on heavy consumption tools. Its low voltage start-up reduces the current draw and has less starting torque on the motor.

Bolting/Wrenching.

Nailing/Stapling.

Hobby Painting.

Inflating.

Product description

Cast iron, v-twin cylinder, oil lubricated pump with belt drive technology 20-Gallon air compressor features: one piece cast iron crankcase, thermally stable cast iron cylinder body, aluminum head and machined cast iron valve plate, automotive style ball bearings, durable stainless steel reed valves, oil level sight glass, easily accessible oil fill and a 10-Inch cast iron balanced flywheel. The heavy duty induction motor on this compressor allows for maximum performance and efficiency and the 20-Gallon portable tank is equipped with pneumatic tires for maximum portability. Dual voltage motor is wired for standard 120-Volt outlet and may also be converted for 240-Volt application. Also includes a quick-set regulator, tank and working pressure gauges, quick connect air outlet and on/off switch.

From the Manufacturer

Cast iron, v-twin cylinder, oil lubricated pump with belt drive technology 20-Gallon air compressor features: one piece cast iron crankcase, thermally stable cast iron cylinder body, aluminum head and machined cast iron valve plate, automotive style ball bearings, durable stainless steel reed valves, oil level sight glass, easily accessible oil fill and a 10-Inch cast iron balanced flywheel. The heavy duty induction motor on this compressor allows for maximum performance and efficiency and the 20-Gallon portable tank is equipped with pneumatic tires for maximum portability. Dual voltage motor is wired for standard 120-Volt outlet and may also be converted for 240-Volt application. Also includes a quick-set regulator, tank and working pressure gauges, quick connect air outlet and on/off switch.

• 1. 6 HP, dual-Voltage, induction motor wired for standard 120-Volt outlet and convertible to 240-Volt applications
• 135 max psi
• Delivers 6. 2 CFM at 40 psi and 5. 3 CFM at 90 PSI
• Cast-iron, 20 Gal. vertical tank
• V-twin, cast-iron, oil-lubricated pump
• Pneumatic tires for mobility
• UL certified and CSA listed

User questions & answers

Question:	Will it run with a 1/2" fitting for a 1/2" hose? If you run a 1/2" hose at full blast, how long can you run, & @ what pressure does it start to fill
Answer:	That's about what I carry, a 95 lb. Genny, a cooler loaded an a 7 gallon water container. No problems an plan to add a little more next trip.
Question:	What kind of oil lube? Splash or pressure
Answer:	Yes it does and you also get several keys
Question:	Would this paint an entire car? Most likely will remove any easy access panels and paint them individually. Removing fenders & bumpers if allows
Answer:	Depends on the type most are 3" to 6".
Question:	How many amps does it draw on 120 volts
Answer:	Sorry friend, I have a android phone and it works great with it. This is a great HU.

Product features

Industrial Air 20 Gallon Oil Lubricated Air Compressor

Features and Benefits:

Reliable Power and Performance

The cast iron, twin cylinder pump featuring an aluminum head & valve plate helps ensure faster heat dissipation.

The heavy duty dual voltage induction motor is able to drive high pump performance which helps to ensure trouble-free operation.

Easy Operation

The on-board controls offer easy access to quick-set regulator, tank and tool pressure gauges, quick connect air outlet and on/off switch.

Unit is shipped with synthetic air compressor oil.

Maximum Portability

Pneumatic wheels and a small footprint allows for excellent mobility.

Front handles offer easy transportation to various job sites.

Product description

Makita’s 3. 0 HP Air Compressor is equipped with Makita’s Big Bore engineered pump cylinder and piston for higher output for two nailers, with less noise and improved jobsite performance. The MAC5200 delivers industrial power and results with improved durability and includes rugged wheels and folding handle for easy transport. 3. 0 HP with Big Bore Engineered Pump The MAC5200 is powered by a 3. 0 HP motor with built-in thermal overload for additional protection. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. The MAC5200 has an oil lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The 5. 2 gallon tank sustains an operating pressure of 140 PSI and delivers 40PSI (6. 9 CFM) and 90 PSI (6. 5 CFM), enough for two nailers. The oil lubricated pump runs cooler, and the finned discharge tubing dissipates heat more efficiently. The roll cage construction is built for extra protection for the pump and motor assembly, helping it withstand harsh jobsite environments.

Makita's 3.0 HP Air Compressor is equipped with Makita's Big Bore engineered pump cylinder and piston for higher output for two nailers, with less noise and improved job site performance. The MAC5200 delivers industrial power and results with improved durability, and includes rugged wheels and folding handle for easy transport.

3.0 HP with Big Bore Engineered Pump

The MAC5200 is powered by a 3.0 HP motor with built-in thermal overload for additional protection. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. The MAC5200 has an oil-lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The 5.2 gallon tank sustains an operating pressure of 140 PSI and delivers 40PSI (6.9 CFM) and 90 PSI (6.5 CFM), enough for two nailers. The oil-lubricated pump runs cooler, and the finned discharge tubing dissipates heat more efficiently. The roll-cage construction is built for extra protection for the pump and motor assembly, helping it withstand harsh jobsite environments. Ease-of-use and convenience features include tool hangers, a built-in storage compartment for air fittings and accessories, and an air hose wrap to store 50 feet of 3/8-inch air hose with handle folded or upright. Other features include a convenient oil drain and oil sight glass, and a tank drain valve that supersedes standard petcock design for easier maintenance.

Versatile Design for a Range of Applications

The MAC5200 is engineered for low noise, high output and less maintenance, and delivers industrial power and results with improved durability under tough job site conditions. The MAC5200 is just another example of Makita's commitment to innovative technology and best-in-class engineering.

About Makita Big Bore Air Compressors

Makita Big Bore Air Compressors deliver higher output and less noise for improved job site performance. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. All Makita Big Bore Air Compressors are oil lubricated and equipped with large automotive style filters for increased air intake and greater efficiency. Makita Big Bore Air Compressors deliver industrial power and results with improved durability.

About Makita

Makita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.

Warranty

Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. Please see makitatools.com for complete details.

What's in the Box

Makita MAC5200 3.0 HP Air Compressor, oil and 1/4-inch universal quick coupler.

From the Manufacturer

Power and performance to run two framing nailers. Contractor air compressor features a low profile for easy storage (with handle folded), rugged wheels for job site portability, cast iron cylinders, industrial air filter, thermal overload protection and more.

• Cast iron pump with Big Bore cylinder and piston is engineered to provide faster recovery time for improved performance
• Powerful 3.0 HP* motor produces 6.5 CFM at 90 PSI for increased productivity
• Pump is oil lubricated for cooler running temperatures and reduced wear
• Durable cast iron cylinder reduces wear and increases pump life; removable for easy maintenance
• Folding handle with low profile design for easy storage with handle folded
• Rugged wheels for job site portability
• Built in storage compartment conveniently stores air fittings and accessories

User questions & answers

Question:	Is it made in China or Taiwan? Where is the manufacture origin
Answer:	Yes it should be just fine it is simply a 50 psi stronger pancake with a very quick recovery from 0 to 200 psi in three minutes
Question:	Can the female air couplings be unscrewed and changed out for high flow couplings, or are they not removeable
Answer:	Haven't tried impact wrench. It works great with a framing nailer and finish nailer
Question:	has anybody used this compressor with a plasma cutter that requires 5-7cfm(90psi
Answer:	If the compressor is facing due north, the drain is on the west side (bottom of course) of the tank.
Question:	Due to the small tank, does it constantly cycle running a 1/2 inch impact wrench
Answer:	Sure. And yes, it is very loud

Product features

Makita MAC5200 3.0 HP Big Bore Air Compressor

Makita’s 3.0 HP Air Compressor is equipped with Makita’s Big Bore engineered pump cylinder and piston for higher output for two nailers, with less noise and improved jobsite performance. MAC5200 delivers industrial power and results with improved durability and includes rugged wheels and folding handle for easy transport. The MAC5200 is engineered for low noise, high output and less maintenance, and delivers industrial power and results with improved durability under tough job site conditions.

Product description

Cast iron, twin cylinder, oil lubricated pump with belt drive technology 20-Gallon air compressor features: one piece cast iron crank case, thermally stable cast iron cylinder body, aluminum head and valve plate, automotive style ball bearings, durable Swedish stainless steel reed valves, oil level sight glass, easily accessible oil fill and 12-Inch cast iron balanced flywheel. The heavy duty induction motor allows for maximum performance and efficiency, along with the 155 PSI max pressure for optimum tool performance. 20-Gallon ASME portable tank has pre-attached pneumatic tires for maximum portability. Dual voltage motor is wired for standard 120-Volt outlet and may also be converted for 240-Volt application. Shipped with synthetic oil for optimum performance and long life and equipped with a quick-set regulator, tank and working pressure gauges and on/off switch.

• Cast iron, twin cylinder, oil lubricated pump
• Dual voltage motor is wired for standard 120-Volt outlet and may also be converted for 240-Volt application
• 155 PSI max pressure for optimum tool performance
• 20-Gallon ASME horizontal portable tank with pre-attached pneumatic tires, quick-set regulator, tank and working pressure gauges and on/off switch
• Maximum pressure: 155 PSI; CFM at 90 PSI: 5.7; CFM at 40 PSI: 7.0; RHP: 1.9; UL and CSA certified

User questions & answers

Question:	Why in the manufactures description it does not mention if it is a single stage or a two stage compressor
Answer:	Yes. We mounted ours with four (4) screws into the trailer frame. I am not sure how else you would mount it.
Question:	What is the duty cycle rating of this compressor
Answer:	Yes it is open on both ends.
Question:	What country is the moter made in
Answer:	5/8 inch pin is used
Question:	What's the HP on this air compressor
Answer:	I would not tow anything with it. It is for racks. I use a bike rack and a hitch rack with it and it works well.

Product features

Industrial Air 20 Gallon Oil Lubricated Air Compressor

Features and Benefits:

Reliable Power and Performance

The cast iron, twin cylinder pump featuring an aluminum head & valve plate helps ensure faster heat dissipation.

The 155 PSI max pressure provides optimum tool performance.

The heavy duty dual voltage induction motor is able to drive high pump performance which helps to ensure trouble-free operation.

Easy Operation

The on-board controls offer easy access to quick-set regulator, tank and working pressure gauges, and on/off switch.

Unit is shipped with synthetic air compressor oil.

Maximum Portability

Pre-attached pneumatic wheels and a small footprint allows for excellent mobility.

The front handle offers easy transportation to various job sites.

Product description

The Craftsman 6 gallon air compressor features an oil-free pump for maintenance-free operation and a long life. It is lightweight and portable at 30lbs, and features a long runtime and quick recovery.

• 6 gallon pancake maximizes portability and stored air
• Durable, oil free pump for long life and no maintenance
• 150 max PSI to ensure adequate cut in pressure for a variety of applications
• 2.6 SCFM @ 90 PSI allows for quick compressor recovery time. Voltage - 120 volt
• Easily starts up in cold weather
• 13 piece accessory kit includes: 25' X 1/4inches Pvc air Hose with coupler and plug assembled, tire chuck with plug, blow gun with plug, tire gauge, blow gun with OSHA safety nozzle, rubber tip, three inflator adaptors
• 1 year limited warranty, refer to "warranty & support" section below for full details

User questions & answers

Question:	Is this made by black and decker? what lind of gears does it have? are they vynil
Answer:	Three.but have adapter to use 2 holes.
Question:	Is this unit built in the U.S
Answer:	No it doesn’t come with it. You have to buy it separately. You can get it from Home Depot.
Question:	What is the noise rating on this? Is it louder than comparable brands
Answer:	Yes it connects to an air compressor.
Question:	How many amps? Need to know if it will trip my standard 15 outlets or if it needs to run on a 20 amp outlet
Answer:	I will use Amazon when I need them. Just purchased product so do not need one now.

Product description

The CALIFORNIA AIR TOOLS 8010 Ultra Quiet & Oil-Free Air Compressor is designed to be one of the quietest air compressors in the industry having only 60 decibels of sound. The powerful 1.0 HP  motor operates at only 1680 RPM creating less noise and less wear. The Oil-Free Dual Piston Pump System is engineered for high performance and durability. The CAT-8010 Air Compressor has a Oil-Free Dual Piston pump designed to have a life cycle before wear of 3000 Plus hours compared to other comparable air compressors with life cycles of 500 hours or less. The Oil-Free pump allows for use in a variety of temperatures and uneven terrains. The large 8.0 Gallon Steel Air Tank is Lightweight (54 lbs) and the wheel kit makes it very easy to transport. This air compressor is ideal for anyone working inside where noise is a major issue.

• Comes complete with Wheel Kit & Air Filter | No hose included | Consider you will need a ¼” Universal / Industrial Male Quick Connector to attach your hose to the air compressor
• Product dimensions – 26" L x 14" W x 23” H | Max Pressure – 120 PSI | Voltage – 110V / 60 Hz | Min running watts – 2500 | Noise level – 60 dBA | Max Continuous run time – 30-60 min (depending on PSI & CFM) | Low Amp Draw – 8.5 Amps
• Oil-Free Pump for Less Maintenance & Costs | Powerful 1.0 HP (Rated / Running) 2.0 HP (Peak) Motor
• The large 8.0 Gallon Steel Air Tank is Lightweight (48 lbs) and the wheel kit makes it very easy to transport
• The Oil-Free pump allows for use in a variety of temperatures and uneven terrains | This air compressor is ideal for anyone working inside where noise is a major issue

User questions & answers

Question:	Este producto trae manguera
Answer:	Mine is In Win 101 Mid Tower Pink and it fits perfectly. and also looks great
Question:	Will this run two nail guns
Answer:	The rgb controller cable is connected to PSU sata header, not motherboard.
Question:	Will this compressor run a Tornador Black interior cleaner
Answer:	It does come with a second bracket i have two fans on mine
Question:	I have seen customer photos of some fairly poor welds on this product and it causes me concern. any comments about the cat 8010 unit's welds in
Answer:	It comes with thermal paste in a little tubing.

Product features

California Air Tools 8010 Ultra Quiet & Oil-Free Air Compressor

The CALIFORNIA AIR TOOLS 8010 Ultra Quiet & Oil-Free Air Compressor is designed to be one of the quietest air compressors in the industry having only 60 decibels of sound.

The powerful 1.0 HP motor operates at only 1680 RPM creating less noise and less wear. The Oil-Free Dual Piston Pump System is engineered for high performance and durability.

The CAT-8010 Air Compressor has a Oil-Free Dual Piston pump designed to have a life cycle before wear of 3000 Plus hours compared to other comparable air compressors with life cycles of 500 hours or less.

The Oil-Free pump allows for use in a variety of temperatures and uneven terrains.

The large 8.0 Gallon Steel Air Tank is Lightweight (48 lbs) and the wheel kit makes it very easy to transport.

This air compressor is ideal for anyone working inside where noise is a major issue

California Air Tools 8010

30% Less Noise than Standard Air Compressors.

Oil-Free

Cleaner air for better tool operation.

Less maintenance and Costs.

Use in Cold Temperatures.

8.0 Gallon Steel

Handle and Wheels to move around easily.

1.0 Hp Motor / Pump

3.10 CFM @ 40.

Fast Fill Time

Time to fill tank from empty to full - 130 Seconds.

Fast Recovery Time

Recovery from 90 PSI to 120 PSI - 30 Seconds.

Product description

INCLUDES: Two Universal Air Couplers (attached) Instruction ManualFEATURES: 3.0 SCFM delivered @ 90 PSI pump, 2.5 gallon tank and 200 max PSI enables large amount of nails to be fired and provides quick recovery Durable oil free pump provides extended maintenance-free operation Low 71.5* dBA allows for quieter operation (*Tested per ISO3744) Low 12 amp draw motor provides easy start-up and reduces breaker tripping Lightweight (36 lbs), thin (12.5") and compact design is easy to carry and store Compressor can be operated/stored in either the vertical or horizontal position

• 3.0 SCFM delivered at 90 PSI pump, 2.5 gallon tank and 200 max PSI ; Pump Speed 2,300 rpm
• Durable oil Free pump provides extended maintenance Free operation
• Low 71.5 dB allows for quieter operation;High flow regulator for increased Performance
• Low 12 amp draw Motor provides Easy start up and reduces breaker tripping
• Lightweight (36 pounds), thin (12.5") and Compact Design is Easy to carry and store

User questions & answers

Question:	Hardwood installs, i been using 6gal @2.8 scfm will it do as good if not better being a 2.5 tank w/3.0 scfm's. Will this work
Answer:	This model delivers 3.0 SCFM @ 90 PSI with a maximum tank pressure of 200 PSI. Please consult your tools CFM requirements to confirm if this will work.
Question:	Will this run a standard 1/2" impact wrench.? Im looking for a small garage unit for tires and minor service. Die grinder, impact etc
Answer:	No enough air capacity..
Question:	What is the duty rating on this unit? Is it 50% like most oiless
Answer:	"This air compressor pump is capable of running continuously. However, to prolong the life of your air compressor, it is recommended that a 50% average duty cycle be maintained; that is, the air compressor pump should not run more than 5 minutes in any 10 minute period." (Quoted from the instruction manual) -- so the short answer would be yes.
Question:	Can anyone confirm this compressor will run off a Honda EU2000i generator
Answer:	Your generator could this pretty easily. Any (US) generator rated for 1400 watts or higher will work. Most (US) 1000w generators will work, so long as they accept spikes up to 1400w. Yours accepts 1600w continuous with spikes up to to 2000w.

Product features

DEWALT DWFP55130 Heavy Duty 200 PSI Quiet Trim Compressor

This 2.5 Gallon, 200 Max PSI, compressor is ideal for supporting a variety of pneumatic and air tool applications. The oil-free pump delivers 3.0SCFM @ 90PSI for long tool runtime and quick recovery. The compressor can be operated/stored in either the vertical/horizontal position for quick and easy space-saving around a garage or jobsite.

Product description

Portable Electric Oil-Lubricated Air Compressor, Twin Stack Tank Type, HP 2.5, 115VAC Voltage, Full Load Amps 12.3, Free Air CFM @ 90 PSI 4.2, Max. Pressure 130 psi, Tank Size 4.2 gal., Weight 77 lb., Cylinder Material Cast Iron, Lubrication Type Oil Lubricated, Motor RPM 1730, Avg. Pump Life 2, 000 hr., dBA @ 3 Feet 79.0, Overall Length 19-3/8 In., Overall Width 18-3/4 In., Overall Height 18 In., Compressor Oil Includes.

Makita's 2.5HP Air Compressor is equipped with Makita's Big Bore engineered pump cylinder and piston for higher output for two nailers, with less noise and improved job site performance. The MAC2400 delivers industrial power and results with improved durability under tough job site conditions.

2.5 HP with Big Bore Engineered Pump

The MAC2400 is powered by a 2.5 HP motor. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job-site conditions. The MAC2400 has an oil-lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The Big Bore oil-lubricated pump is also more efficient: the MAC2400 runs cooler and at half the RPM of most competitive units, resulting in greater motor and pump life and lower noise. The 4.2 gallon twin-stacked tank sustains an operating pressure of 130 PSI, and delivers 40PSI (4.8 CFM) and 90 PSI (4.2 CFM), enough for two nailers. The low AMP draw reduces instances of tripped breakers and voltage drop that can cause premature motor failure. The roll bar handle provides portability and additional protection, helping it withstand harsh jobsite environments. Additional features include a convenient oil drain and oil sight glass, a tank drain valve that supersedes standard petcock design for easier maintenance, and finned discharge tubing that dissipates heat more efficiently.

Versatile Design for a Range of Applications

The MAC2400 is engineered for low noise, high output and less maintenance, and delivers industrial power and results with improved durability under tough job site conditions. The MAC2400 is just another example of Makita's commitment to innovative technology and best-in-class engineering.

About Makita Big Bore Air Compressors

Makita Big Bore Air Compressors deliver higher output and less noise for improved job site performance. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. All Makita Big Bore Air Compressors are oil lubricated and equipped with large automotive style filters for increased air intake and greater efficiency. Makita Big Bore Air Compressors deliver industrial power and results with improved durability.

About Makita

Makita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.

Warranty

Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. Please see makitatools.com for complete details.

What's in the Box

Makita MAC2400 2.5 HP Air Compressor, oil and 1/4-inch universal quick coupler.

From the Manufacturer

The new MAC2400 - Twin Stack air compressor by Makita is blowing away the competition. With built-in features such as a super quiet motor that draws only 12.3 amps to operate, a lower 1720 RPM rating and a heavy duty Intake Air Filter system like no other, its easy to see how this unit will out last and outperform everyone else. It delivers 4.2CFM @ 90PSI and is equipped with a lever handled ball valve drain system to get rid of condensation build up in the tank . The exclusive finned discharge tubing increases heat dissipation while reducing moisture in the lines and the easily removable cast iron cylinder reduces wear for increased pump life. High quality, maximum performance - just what you expect from Makita.

• Dimensions: 19.38" D x 18.75" W x 18" H | Weight: 77 lbs
• Low AMP draw reduces incidences of tripped breakers at start up. The 4.2 gallon twin stacked tank sustains an operating pressure of 130 PSI, and delivers 40 PSI (4.8 CFM) and 90 PSI (4.2 CFM), enough for two nailers
• Pump is oil lubricated for cooler running temperatures and reduced wear. Built in thermal overload for additional motor protection. Compressor Oil (181122 A). 1/4 inches Universal Quick Coupler (447013 E)
• Roll cage construction provides complete protection to withstand extreme jobsite environments. Lever handle ball valve tank drain valve improves upon standard petcock design for easier maintenance
• Large automotive style industrial air filter for increased air intake and greater efficiency. Durable cast iron cylinder reduces wear and increases pump life; removable for easy maintenance. Oil sight glass for fast, easy and efficient maintenance
• Cast iron pump with Big Bore cylinder and piston is engineered to provide faster recovery time for improved performance
• Oil lubricated: Cooler running pump, minimizes wear

User questions & answers

Question:	Is there an exploded view of componets? Compressor will go to 40 lbs and no further. Where do you start looking to replace parts to resolve? Thanks
Answer:	Yes it should be able to do that. But it may take a little bit of time though.
Question:	Has anyone any experience with changing the oil to a full synthetic? If so, what weight oil
Answer:	Got this right from the CH website specific to this compressor.....At 68 dBa this compressor offers a quiet work environment
Question:	what brand and weight air compressor oil should I use
Answer:	DC080510 compressor is 1 hp.
Question:	I love Makita tools. But "Low AMP draw" is a suspiciously weaselly way to state power consumption. WHAT IS the EXACT MAX AMP draw
Answer:	Este compresor no se usa para pintar.

Product features

Makita MAC2400 2.5 HP* Big Bore Air Compressor

Makita’s 2.5HP Air Compressor is equipped with Makita’s Big Bore engineered pump cylinder and piston for higher output for two nailers, with less noise and improved job site performance. The MAC2400 delivers industrial power and results with improved durability for tough job site conditions.

2.5 HP with Big Bore Engineered Pump

The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. The MAC2400 has an oil lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The Big Bore oil-lubricated pump is also more efficient: the MAC2400 runs cooler and at half the RPM of most competitive units, resulting in greater motor and pump life and lower noise.

Jobsite Ready

The 4.2 gallon twin-stacked tank sustains an operating pressure of 130 PSI, and delivers 40 PSI (4.8 CFM) and 90 PSI (4.2 CFM), enough for two nailers. The low AMP draw reduces instances of tripped breakers and voltage drop that can cause premature motor failure. The roll bar handle provides portability and additional protection, helping it withstand harsh jobsite environments. Additional features include a convenient oil drain and oil sight glass, a tank drain valve that supersedes standard petcock design for easier maintenance, and finned discharge tubing that dissipates heat more efficiently.

Versatile Design for a Range of Applications

The MAC2400 is engineered for low noise, high output and less maintenance, and delivers industrial power and results with improved durability under tough job site conditions.

Product description

The California Air Tools 10TL Ultra Quiet and Oil-Free Tankless Air Compressor is designed to be 1 of the quietest air compressors in the industry having only 65 decibels of sound. The powerful 1.0 HP motor operates at only 1680 RPM creating less noise and less wear. The CAT-10TL Air Compressor has a Oil-Free Dual Piston pump designed to have a life cycle before wear of 3000 Plus hours compared to other comparable air compressors with life cycles of 500-hours or less. The Oil-Free pump allows for use in a variety of temperatures and uneven terrains. The Bleeder Valve allows you to adjust the maximum PSI from 0 to 100 psi. Factory set to 100 psi Maximum. The Bleeder Valve continuously bleeds off the excess pressure (air) so that the motor/pump does not stall or have a hard start on restart. The Power Foot Pedal allows you to control the air compressor power with your foot leaving your hands free. Maximum (non-stop) continuous running motor is 1-hour Maximum. The attached water trap helps to remove moisture from the air. Great for Inflating, Engraving, Airbrushing and many other air tools. This air compressor is ideal for anyone working inside where noise is a major issue.

• Ultra quiet only 65 decibels
• Oil-free pump for less maintenance & costs
• Lightweight for easy transporting - 25 lbs
• Powerful 1.0 HP (rated/ running) 2.0 HP (peak) motor
• 2.20 CFM @ 90 PSI
• The Power Foot Pedal allows you to control the air compressor power with your foot leaving your hands free.

User questions & answers

Question:	Is this a tankless compressor. I.e. the hose can be directly connected and used to fill tires run air tools fill mattresses etc
Answer:	I don't use it by itself. I have fine curly hair and use it as a primer with all the other products. My go-to use alone product by this line is High Dive. It smells great, leaves your hair soft and moisturizes. If you buy it, a little goes a long way. It can weigh your hair down and look greasy the day after Hope it helps!
Question:	Will this work for a pond DYI aeration system
Answer:	yes it would there are no holes in the bottom until its mounted but its not to rigged so I don't know how much water it would hold if you built a frame around it it would work pretty good.
Question:	will this be able to run a brad nailer? does it hold a constant psi
Answer:	It will if your lay it sideways. But honestly it being a generator I wouldn’t.
Question:	Can it be used with a drywall texture hopper for patches
Answer:	Back 3 feet; sides 21 angled; front 18 inches straight; depth deep-16”. Has lock hasp ready for lock. Very satisfied with this box on front of trailer.

Product description

Metabo HPT is reinventing the jobsite compressor with THE TANK . With class leading PSI and weighing only 41lbs, this lightweight compressor packs more pressure into a smaller body. It is engineered with the power to run a framing, roofing or siding crew, and versatile enough to run a team of five 18Ga nailers at a time. THE TANK offers serious pros a next level compressor, which provides the most demanding framer no downtime while driving nails flush. THE TANK has the capacity and PSI to simultaneously run framing nailers or siding nailers or roofing nailers at the same rate of production as a traditional jobsite compressor. Finish crews can even run 15Ga or 16Ga finish nailers or 18Ga brad nailers. At 200 PSI and 4 CFM at 90 PSI, you can get more work done with less weight. THE TANK rolls through the toughest jobsites with the power and performance to get the job done! Compared to model EC710S Compared to model EC99S

• MORE PRESSURE: At 200 PSI, this compressor offers 25% greater PSI than a basic pancake compressor
• 30% MORE AIR FLOW: 4 CFM @ 90 PSI allows for multiple large body nailers to be used on a single compressor
• VERSATILITY: Simultaneously runs 2 framing nailers or 2 roofing nailers or 2 siding nailers or 3 finish nailers or 5 brad nailers
• PRODUCTIVITY: Consistently drives nails flush with no delay
• LIGHTWEIGHT: At only 41 lbs, it is 22% lighter compared to a traditional twin-stack compressor
• CAPACITY: 6-gallon tank provides all the air to run a crew
• DURABLE: All metal handle outlasts the harshest demands of the jobsite

User questions & answers

Question:	Will this compressor be usable for sprinkler blowouts
Answer:	Your electric motor should be running around 3450 RPM. It will say it on a tag on the motor. Your pump should be running around 1050-1200 RPM depending on your pulley sizes.
Question:	Will this run a standard 1/2" impact wrench
Answer:	yes!
Question:	Where is the tank drain located on this compressor
Answer:	Looking from the pulley side (with the pump cylinders behind the flywheel) it turns counter clockwise as most compressors do. The fan blades built into the flywheel will blow air across the cylinder fins when turning counter clockwise.
Question:	Would this compressor work for an airbrush and is it loud
Answer:	Yes I believe so that this will work for you

Product features

MORE PRESSURE

At 200 PSI, this compressor offers 25% greater PSI than a basic pancake compressor*

* Compared to Model EC710S

30% MORE AIR FLOW

4 CFM @ 90 PSI allows for multiple large body nailers to be used on a single compressor

VERSATILITY

Simultaneously runs 2 framing nailers or 2 roofing nailers or 2 siding nailers or 3 finish nailers or 5 brad nailers

LIGHTWEIGHT

At only 41 lbs, it is 22% lighter compared to a traditional twin-stack compressor**

** Compared to model EC99S