11 best jobsite table saws

Product description

Maximized for accuracy and capacity this DEWALT DWE7485 8-1/4 in. table saw includes on-board storage for blade guard assembly, non-through cut riving knife, anti-kickback pawls, blade change wrenches, miter gauge and push stick. The powerful DEWALT 15 amp, 5800 RPM motor allows users to complete a majority of applications. The rack & pinion fence allow for fast, easy adjustments and provides the capacity to rip 4x8 sheet goods.

• Portability: Compact size for ease of transportation and storage
• Easy adjustments: Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate
• Variety of cuts: 24.5 inches of rip capacity for ripping 4x8 plywood or OSB sheets
• Power: 15 Amp, 5800 rpm motor
• Onboard storage: Onboard storage provides easy access to the site pro guarding components and push stick when not in use
• Guaranteed tough: Metal roll cage ensures job site durability

User questions & answers

Question:	Can i mount the axtra 8-outlet power strip on the table saw
Answer:	We do not recommend modifications on our tools as they are designed to work as is. If you are meaning plugging it in to a 8 outlet powers strip: that is not recommended. This unit should be plug into a direct outlet of using the appropriate extension cord ( VOLTS, LENGTH and WIRE GAUGE)
Question:	What are the dimensions of the unit on the stand when closed up. WxHxD? Need to know if it will fit in the storage cubby I have in the garage
Answer:	Laid down flat - 27 1/2" wide, 46" long (you can take about 3" off this by using the shorter handle length slots), 25" high with rail on (21 1/2" with it off). You can stand it up or lay it down - either works.
Question:	Does this saw accept dado blade set
Answer:	Yes, you will need the Dado Throat Plate which is DeWalt Part Number DWE7402D1. Per DeWalt, do not attempt to stack dado blades thicker than 13/16" (20 mm). Do not use dado blades larger than 8" (200 mm) diameter. Since dado cuts are not thru-cuts, the cuts must be performed with the blade guard assembly removed. To remove the blade guard assembly, pull riving knife/blade guard release lever and pull up on the guard or riving knife to remove. When using the dado, the special dado insert (also sold as an accessory) must be used.
Question:	How good would this saw be for a beginning woodworker on a limited budget
Answer:	It's a great saw. It has some safety features that I love. If you have a limited budget I would recommend that you stave for a couple of days and buy this saw. It is bulky and it's gonna cost you a little over $600 out the door but it's worth it. Remember when buying tools try to buy the best you can find. You don't want a cheap tool to stop working in the middle of the day.

Product description

The SKIL TS6307-00 10" Jobsite Table Saw has a 25-1/2” (64.77cm) Rip Capacity and is equipped with a 15-Amp motor, integrated foldable legs, rack & pinion fence rails, and a dust port elbow to keep your jobsite clean. The 15-Amp motor quickly rips through hardwoods with ease, while the rack & pinion fence rails make fence adjustments fast, smooth, and accurate. With its 0-45° bevel capacity, the quick release lever allows for cuts between two positive stops at 0 and 45 degrees, and its 4x4 cutting capacity allows for swift 90-degree cutting. The integrated foldable legs seamlessly form into a folding stand to provide portability and convenience, while the dust port elbow systematically redirects dust to a container for easy cleanup.



This large coated cast aluminum tabletop saw comes equipped with a 10”, 24-tooth carbide blade. The parallel blade alignment allows for ease of blade adjustment along the rip fence and miter slot, for precise accurate cuts. This table saw features a safety anti-restart switch in case of power outages.

• RACK AND PINION FENCE RAILS – Ensures fence stays parallel to blade for fast, smooth, and accurate cuts
• INTEGRATED FOLDING STAND – Legs quickly fold in to provide portability and convenient storage
• PARALLEL BLADE ALIGNMENT – Available micro-adjustment of blade so that it is parallel to rip fence and miter slot
• 4x4 CUTTING CAPACITY – Cuts material up to 4x4 at 90 degrees
• 2-47° BEVEL CAPACITY – Cuts between 2 positive stops at 0 and 45 degrees with quick release lever
• DUST PORT ELBOW – Redirects dust to a container for easy cleanup

User questions & answers

Question:	Does it come with a blade
Answer:	Yes it comes with a blade! Not one of the best but it will get you started.
Question:	Will the saw sit flat on a work bench when legs are folded up
Answer:	Hello, Yes this saw can sit plat with the table folded up underneath. Thank you for your inquiry!
Question:	Is the miter slot a standard 3/4" size
Answer:	Yes
Question:	Why is Amazon humping the Skil router with this saw? Can you mount it from underneath and make a router table
Answer:	No. You can't attach a router to this table saw. A recommended table for the router could be the Skil RAS900 Router Table.

• ☘In US, within seven days after delivery arrive in your hands☘
• 🔥Ideal gift for your family & professional work
• ☘【Aluminum & Extension Table】- 25 -1/3'' x 28 -1/3'' aluminum table extends to 25 -1/3'' x 36 - 1/5'' for longer work pieces. Aluminum table provides excellent resistance to oxidation and the best sliding properties. Can be stored and expanded at any time, more durable and convenient
• ☘【Powerful 15A Motor】- The TACKLIFE table saw features a 15A high torque Motor with the power , it provides speed of 4800 rpm, makes the cut faster and more powerful. Cutting works on the different pieces of work can be accomplished quickly and easily, bottom frame provides more excellent stability
• ☘【Humanized Design】- Improved safety and comfort by including push stick; triangular base feet provide secure support; Two external hex keys are included to help you easily change the saw blade; The transparent blade protection prevents accidental cuts, the dust blower makes it possible to connect your vacuum cleaner, to vacuum and collect sawdust while working
• ☘【45 ° Bevel Cut】- 0 ° to 45 ° bevel range allows you to make bevel cuts. Height and tilt can be easily adjusted with an adjusting wheel. At a 45° angle, a cutting depth of up to 2'' can be achieved, and for a 90° angle of up to 2-4/5'' . The saw is equipped with a 24T 10'' blade for cutting wood and is compatible with other saw blades on the market
• ☘【Miter Gauge & Rip Fence】- Miter Gauge allows miter cutting between +/- 45°, can meet different job needs; Adjustable Rip fence provides a more precise cut, and makes the cut smoother, 31 - 1/2'' Rip capacity allow for cut large sheet materials to size

Product features

TACKLIFE 10-Inch 15A TABLE SAW , 31 - 1/2'' RIP CAPACITY, 45ºBEVEL CUTTING, ALUMINUM EXTENSION TABLE

• 15A powerful motor is so suitable for cutting hardwood materials
• 25 -1/3'' x 28 -1/3'' Aluminum table could extend to 25 -1/3'' x 36 - 1/5''
• 31 - 1/2'' Rip capacity allows cutting a variety of large materials
• Max cut depth is 2-4/5'' at 90°and 2'' at 45°
• Miter Gauge & Rip Fence provide and more precise and a variety of cutting
• Efficient dust cleaning by connected with aspirator of 1-3/8-inch

BEVEL CUTTING

Push Bar & Rip Fence

The Push Bar makes working safer

The Rip Fence makes cutting straight lines easier

Replaceable Saw Blade

The saw blades can be replaced quickly using the accessories provided in the package

Solid Iron Support

Triangle support feet prevents table from tilting when cutting, enhances stability

Dust port & Collection System

They minimize efficiently the amount of cleanup that you have to do

On-Board Storage

Easy access to components and push stick

A respect of 5S & Lean Management on your workbench

Aluminum & Extension Table

Aluminum coat could reduce friction for more smooth sliding

The arms of extension allow for a 3.9'' on both sides

Work Anywhere You Want

Product description

The Bosch 4100 10 10 In. Work site Table Saw with Gravity Rise Wheeled Stand delivers both professional rip capacity and outstanding portability for a tool that can get the job done, wherever it is. The powerful 15 Amp saw delivers 4. 0 max HP for outstanding productivity. It also incorporates soft start circuitry for smooth but quick ramp up to the operating Speed to manage the intensity of motor start up and minimize the possibility of tripping a circuit breaker. It includes constant response circuitry to help maintain Speed under load, and overload protection. The square lock rip fence is engineered for maximum trueness and great ease of use, with the fence able to easily glide along the rail for one handed operation. The lighter GTA47W gravity rise wheeled stand has 8 In. treaded rubber composite tires and a single action design for easy set up and transport. It is job site ready with heavy duty construction. The smart guard system is the first modular table saw blade guard, featuring a three position adjustable riving knife, anti kickback pawls and non obstructed view barrier guard assembly. The table saw provides a 29 In. x 21 1/2 In. square tabletop with a 25 In. rip capacity for ripping 4 Ft. wide sheets goods in half. SquareLock rip fence – engineered for enhanced clamping and trueness.

Dimensions: Table saw & stand combination in working position = 30.25" Depth (front to back) x 47" Width (when extension is at in-most position) x 35.5" Height. Table-top dimensions = 21-1/2" Depth (front to back) x 29" Width (when extension is at in-most position). Weight: 58.0lb,Weight of Bare Saw - Lb: 63.0,Weight of Saw, Standard Equipment and Stand - Lb: 92.0,Width: 32.0. Works With: Vacuum Hoses-Common 2-1/2" Vacuum Hoses,Vacuum Hose Adapter for 35 mm Vacuum Cleaner Hoses-VAC004,Dust Bag-TS1004,Zero-Clearance Insert-TS1005,Dado Insert-TS1007,Molding Insert-TS1009,Outfeed Support-TS1016,Left-Side Support-TS1008.

• Powerful table saw – has 15-Amp saw with 4. 0 max HP and 3, 650 rpm, for rip-cutting and cross-cutting of fine and rough materials
• Dimensions: 37.7" D x 29.4" W x 19.4" H | Product Weight: 110 lb
• Large cast aluminum top – provides increased work space and material support with a 30 In. ripping capacity
• Soft-start circuitry – manages intensity of motor start-up and minimizes the likelihood possibility of tripping a circuit breaker
• Constant Response circuitry – helps maintain speed under load
• Restart protection – helps to avoid accidental startup
• Portability – works seamlessly with the included lighter GTA47W Gravity-Rise Wheeled Stand for easy jobsite mobility, with single-action setup and take down
• Smart Guard System – riving knife and anti-kickback pawls provide protection, while the guard assembly provides a barrier to help prevent blade contact while allowing an unobstructed view of the cut

User questions & answers

Question:	Bosch 4100-10 lists two weights 60 lbs and 124.2 lbs...Why is there a difference
Answer:	The table saw itself weights about 60lbs, if you include the stand with the wheels added to the saw it weights more. I believe the d/c 4100-9 weights 124.2 with all the accessories. The 4100-10 is listed as weighting about 110lbs shipped, so 110lbs is the weight with everything attached. Does that help make more sense?
Question:	is there a schematic available for this table saw
Answer:	I don't know how detailed you want to get, but by downloading the owner's manual you get the parts breakdown schematic
Question:	I want to be able to cut a 4 by 4. can i replace the blade with od greater than
Answer:	NO you cannot. A greater diameter blade say 12" would bottom out on the framing below and would reduce the life of the motor as well.
Question:	Max blade height above table
Answer:	Hi! The maximum depth of a cut at 90 degrees for a blade on the 4100-10 Table Saw is 3-1/8". For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Product features

Portability

Works seamlessly with the included Gravity-Rise Wheeled Stand.

Soft-Start Circuitry

Manages the intensity of motor start-up and minimizes the possibility of tripping a circuit breaker

SquareLock Rip Fence

Engineered for enhanced clamping and trueness

Smart Guard System

Riving knife and anti-kickback pawls provide protection.

• 【Powerful Motor】15A 2000W pure copper motor can generate 4800RPM cutting power to rip through various materials such as wood, hardboard, plywood, blockboard and chipboard
• 【45ºBevel Cutting】 Bevel tilt angle handle allows a left bevel cutting from 0-45°. Max cut depth is 2-4/5'' at 90°and 2'' at 45°. The table saw is equipped with 10'' 24T carbide-tipped blade for wood and compatible with most of the 10'' blades
• 【Aluminum Extension Tabletop】 Aluminum table surface features excellent antioxidant and anti-deformation, coated to reduce friction for more smooth sliding. The dimension of tabletop is 25.3''x 28.3'' and extension length is up to 3.9'' on both sides, providing more stability when cutting long wood
• 【Miter Gauge & Rip Fence】 Cross cutting requires the use of the miter gauge to position and guide the work. Miter angle can be adjusted from -45°to +45°according to your demand. Rip fence helps you make stable and accurate cuts, max rip capacity is 16.5 in.(42cm) in the left and 12.6 in.(32cm) in the right
• 【More Convenient Design】 On-board storage provides easy access to push stick and Allen wrench for extra convenience. Transparent blade guard ensures a clear vision and forbids careless touching hurt. 2-1/4" dust collection port can be connected with vacuum cleaner for more effective dust cleaning

User questions & answers

Question:	Where is this product manufactured
Answer:	It is made in China.
Question:	Now that you have had a chance to use the saw, would you buy it again
Answer:	It is cheaper than we thought. Also the stand that came with it didn’t fit the saw. Because we needed to use it we wired it on to an old saw stand. I guess you get what you pay for.
Question:	What are the square plastic things for? I dont see them in the instructions, and nd were just sitting in the box. Kind of looks like a holder for the
Answer:	The instructions are really not helpful at all. They do not match any of the parts labels stamped on the parts
Question:	Will blade included for this table saw
Answer:	Sorry, the blades will not included in the package.

Product features

TACKLIFE TABLE SAW 10-Inch 15A, 31 - 1/2'' RIP CAPACITY, 45ºBEVEL CUTTING, ALUMINUM EXTENSION TABLE

• 15A motor is more powerful compared with regular table saws, very suitable for cutting hardwood materials
• 31 - 1/2'' Rip capacity allow cutting a variety of large materials
• Aluminum table extendable on both sides, 25 -1/3'' x 28 -1/3'' aluminum table extends to 25 -1/3'' x 36 - 1/5''
• Max cut depth is 2-4/5'' at 90°and 2'' at 45°
• Miter Gauge & Rip Fence provide variety and more precise cutting
• Dust cleaning efficiently by connecting with aspirator that has 1-3/8-inch

Aluminum Extension Table

Aluminum table coated could reduce friction for more smooth sliding

The arms do extend to allow for a 3.9'' on both sides

About Rip Fence

31 - 1/2'' Rip capacity allow for cut large sheet materials to size

The blade can reach 4800 RPM

About Miter Gauge

Cross cutting requires the use of the miter gauge to position and guide the work

Miter angle can be adjusted from -45°to +45°according to your demand

About On-Board Storage

Provides easy access to push stick and Allen wrench for extra convenience.

A respect Management on your workbench

About Collection System

It features an excellent dust port and collection system

It minimize the amount of cleanup that you have to do

About Excellent Stability

Solid iron stand enhances stability.

Triangle support feet prevents table from tilting when cutting

Product description

The Bosch 4100XC-10 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand delivers both professional rip capacity and outstanding portability for a tool that can get the job done, wherever it is. The powerful 15-Amp saw delivers 4. 0 max HP for outstanding productivity. It also incorporates soft-start circuitry for smooth but quick ramp-up to the operating speed. It includes Constant Response circuitry to help maintain speed under load, restart protection to avoid accidental startup and overload protection. The SquareLock rip fence is engineered for maximum trueness and great ease-of-use. It includes an enhanced auxiliary fence for narrow workpieces. The lighter GTA47W Gravity-Rise Wheeled Stand has 8 In. treaded rubber-composite tires and a single-action design for easy set-up and transport. It is jobsite-ready with heavy-duty construction. The Smart Guard System features a three-position adjustable riving knife, anti-kickback pawls and non-obstructed-view barrier guard assembly. The table saw provides a 30 In. x 22-1/2 In. tabletop with a 30 In. rip capacity for ripping 4 Ft. wide sheets goods in half.

• Powerful table saw – has 15-Amp saw with 4. 0 max HP and 3, 650 rpm, for rip-cutting and cross-cutting of fine and rough materials
• Dimensions: 32.5" D x 27" L x 13" H | Product Weight: 94 lb
• Saves space: Large cast aluminum top provides increased work space and material support with a 25 inch. Ripping capacity to cover all typical job site rip cutting widths
• Portability: Works seamlessly with the included lighter GTA47W gravity rise wheeled stand for easy job site mobility, with single action setup and take down
• Protection: Smart guard system contains riving knife and Anti Kickback pawls provide protection, while the guard assembly provides a barrier to help prevent blade contact while allowing an unobstructed view of the cut
• Soft start circuitry: Manages the intensity of motor start up and minimizes the possibility of tripping a circuit breaker

User questions & answers

Question:	will this connect to the festool 27mm dust collector
Answer:	Don't know that item, but the exhaust/dust port on the Bosch mikes out @ 2.50" OD and 2.25" ID; so, w 27 mm close to 1.06"...likely not And FYI, bought the official Bosch dust collection bag which does a poor job...I use my VacMaster hose- the outer nozzle plugs snugly into the Bosch port's ID and picks up 80-90 % of the wood dust generated...as long as I remember to turn the vacuum on..which I sometimes don't ...love this table saw
Question:	Can a dado blade be used in this saw
Answer:	Yes, the 4100XC-10 table saw can dado cut by using TS1007 dado insert. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	is this saw equipped with the Reaxx system
Answer:	No
Question:	how tall is this saw/stand when folded / stored
Answer:	The table height from floor is 32.5". Its dimension is 27in x 32.5in x 13in. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Product features

BOSCH 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand 4100XC-10

The Bosch 4100XC-10 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand delivers both professional rip capacity and outstanding portability for a tool that can get the job done, wherever it is. The powerful 15-Amp saw delivers 4.0 max HP for outstanding productivity. It also incorporates soft-start circuitry for smooth but quick ramp-up to the operating speed. It includes Constant Response circuitry to help maintain speed under load, restart protection to avoid accidental startup and overload protection. The SquareLock rip fence is engineered for maximum trueness and great ease-of-use. It includes an enhanced auxiliary fence for narrow workpieces. The lighter GTA47W Gravity-Rise Wheeled Stand has 8 In. treaded rubber-composite tires and a single-action design for easy set-up and transport. It is jobsite-ready with heavy-duty construction. The table saw provides a 30 In. x 22-1/2 In. tabletop with a 30 In. rip capacity for ripping 4 Ft. wide sheets goods in half.

Features

• Powerful table saw – has 15-Amp saw with 4.0 max HP and 3,650 rpm, for rip-cutting and cross-cutting of fine and rough materials
• Large cast aluminum top – provides increased work space and material support with a 30 In. ripping capacity
• Soft-start circuitry – manages intensity of motor start-up and minimizes the likelihood possibility of tripping a circuit breaker
• Constant Response circuitry – helps maintain speed under load
• Restart protection – helps to avoid accidental startup
• Portability – works seamlessly with the included lighter GTA47W Gravity-Rise Wheeled Stand for easy jobsite mobility, with single-action setup and take down
• SquareLock rip fence – engineered for enhanced clamping and trueness
• Smart Guard System – riving knife and anti-kickback pawls provide protection, while the guard assembly provides a barrier to help prevent blade contact while allowing an unobstructed view of the cut
• Onboard storage – allows for access to all included components

Product description

The DEWALT DW7451 compact table saw stand delivers the best of both worlds: solid construction for a safe work environment and a compact, folding design for easy transport and storage. Heavy-duty tube steel construction provides the strength you need for safe operation. Integrated support bar hardware holes for secure fastening of saw to the stand. This stand is lightweight; it folds flat for easy handling, storage, and transport. Designed for use with the DW7480 compact job site table saw, Dcs7485 60V table saw and DW745 compact table saw. Backed by a 3-Year limited warranty.

• Heavy-Duty tube steel construction provides the strength you need for safe operation
• Upport bar hardware holes for secure fastening of saw to the stand
• Lightweight; folds flat for easy handling, storage, and transport
• Designed for use with the DW7480 compact job site table saw, Dcs7485 60V table saw and DW745 compact table saw

User questions & answers

Question:	does anyone have instructions to put the saw on the stand? #dwe
Answer:	You can view or download instructions via https://servicenet.dewalt.com/Products/Detail?productNumber=DW7451
Question:	I have the dwe7490. what is the correct stand for that model
Answer:	You can order stand #N272401 online or via the following link: https://servicenet.dewalt.com/Parts/Detail/320318
Question:	Do the legs adjust for uneven ground
Answer:	No, the legs are not adjustable.
Question:	Do this stand is foldable pretty easy for transportation
Answer:	Yes, it folds up very easily. However, it is bolted to the table saw, and it will not fold when attached, (which is good thing when you are using it!). What I do, when I haul this table saw, is just lay it on its side (with the stand attached) in the bed of the truck. It saves me unbolting the stand to haul it, and bolting it together again to to use it at the job site. The table saw that fits this stand is very light, so moving or lifting it with the stand on is no problem.

Product features

DEWALT DW7451 Compact Table Saw Stand

The DEWALT DW7451 table saw stand delivers the best of both worlds: solid construction for a safe work environment and a compact, folding design for easy transport and storage. Featuring heavy-duty tube steel construction that can support the stress of tough saw jobs, this stand is designed for use with the DWE7480 (10" Compact table saw) DCS7485 (60V 8 1/4" Table Saw) and the DW7450 (10" Compact table saw). DEWALT DW745 10-inch compact job site table saw. Integrated support bar hardware holes make it easy to secure the saw to the stand for confident operation.

Product description

RIDGID introduces the 15 Amp 10 in. Table Saw with Folding Stand. This saw features a 4 second blade brake that will stop the blade in under 4 seconds. It also boasts a 27 in. rip capacity for ripping through large sheet goods. The 15 Amp 10 in. Table Saw with Folding Stand includes a folding stand assembly with assembly hardware, blade wrenches, a 10 in. carbide tipped blade, a push stick, a miter gauge, a rip fence, blade guard assembly, anti-kickback pawls, and an operator's manual. SOFTStart Technology: 15 amp motor gradually ramps up the blade speed for quiet and smooth startup Steel Roll Cage Frame: For superior cabinet durability 27 in. Rip Capacity with tape measure rip scale: Provides fast, accurate setup and capability to rip large materials On-Board Tool and Accessory Storage: Conveniently and quickly store accessories including rip fence, blade guard, and miter gauge Integrated 2-1/2 in. Dust Collection Port: Connects to vacuums for for a cleaner work environment Jobsite Ready Stand: Provides easy set-up and stability while on the jobsite Includes: R4518T Table Saw, Folding Stand Assembly and assembly hardware, blade wrenches, 10 in. carbide tipped blade, push stick, miter gauge, rip fence, blade guard assembly, anti-kickback pawls, and operator's manual RIDGID: Powerful. Durable. Professional.

Product description

10" Jobsite Table Saw - Model 10010.001 HIGHLIGHTED BENEFITS: Soft start feature reduces motor noise and vibration as well as greatly increases the motor life. Rapid blade elevation for quicker set-up. 2 in 1 Machine. Blade can be replaced with a sanding disc for greater versatility. 2-year mechanical and 1-year electrical warranty Lighted overload indicator prevents motor damage and will protect if the blade is blocked. Variable speed motor is easy to adjust and produces constant torque over the entire RPM range. Magnetic switch prevents unwanted start after power interruption. FEATURES: Rip fence features L-shaped attachment for use with thin stock. Fence lock for safe transportation, On-board tool and accessory storage. Left tilt blade for added safety. Spindle lock for quick blade replacement. Blade guard features a quick release for easy blade access Riving knife included for non-through cuts. Built in 2-1/2" port for efficient dust management. Adjustable rear material support safely handles large work pieces. Constant torque feature allows heavy sanding with 10" disc at any speed. Fold-up stand features roller wheels for easy transportation at jobsite. Lightweight aluminum table for easy transportation. All accessories included at no extra cost: Sanding Disc 10" 40 tooth carbide tip blade Riving knife Miter gauge Zero clearance table insert Dado insert Optional Accessories: 10010.A005 - Blade Table Inserts 10010.A004 - Dado Table Insert Specifications Model 10010.001 Blade Diameter: 10" Arbor Diameter: 5/8" Max Dado Size: 13/16" x 8" Maximum Depth of Cut at 90°: 3-1/8" Maximum Depth of Cut at 45°: 2-1/4" Maximum Rip to Right of Blade: 28" Variable Speed Blade or Disc RPM: 2,000 - 4,000 Table Size: 25-3/16" x 22-7/16" Table Height: 34" Dust Port Diameter: 2-1/2" Motor (Torque Compensation VFD): 2HP 115V Net Weight lbs.: 90

• Soft start feature reduces motor noise and vibration as well as greatly increases the motor life.
• Rapid blade elevation for quicker set-up. Light weight aluminum table for easy lifting.
• Magnetic switch prevents unwanted start after power interruption. Variable speed motor is easy to adjust and produces constant torque over the entire RPM range.
• All accessories included at no extra cost: Sanding Disc, 10” 40T Carbide Tip Blade, Riving Knife, Miter Gauge, Blade Table Insert, Push Stick
• Fold-up stand features roller wheels for easy transportation at jobsite.

User questions & answers

Question:	Is this essentially the same saw as the Grizzly G
Answer:	This jobsite has variable speed with soft start motor. In addition, it comes standard with sanding disc and 10" blade. This is basically a 2in1 machine that we recently launch last year.
Question:	How wide is the stand at the wheels? I have a tight space I would need to move it through
Answer:	It'd be 24" wide.
Question:	Does it have dust collection port
Answer:	Yes, this saw has a built in 2-1/2” port for efficient dust management.
Question:	How tall is the machine when collapsed? I need to fit it in my truck under the bed cover, which is
Answer:	25” with wheels and legs attached. It would fit under your cover if you unbolted the legs when you’re done.
Question:	Can you plug this saw into a 240V outlet
Answer:	It is only for 120 volts AC. The motor will burn-up if you try.
Question:	What is the Max cutting depth of this saw, will it handle 4x4's
Answer:	No. The saw at its highest point is only 3 1/4 inches from table to the tip of the blade. In order to cut anything thicker you would need to flip the wood over to finish the cut.
Question:	is blade included
Answer:	Yes, a blade is included
Question:	I want to build a crosscut sled. What is the distance from the front of the blade to the end of the T-rail in front
Answer:	I ran the blade all the way up and measured from the edge to the blade at 7 3/4". Measured from edge to the opening in the throat plate 7 1/2". Hope you enjoy your saw as well as I do mine.

Product features

DEWALT 10-Inch Jobsite Table Saw with 32-1/2-Inch Rip Capacity and Rolling Stand

The DWE7491RS 10" Jobsite Table Saw 32 - 1/2" Rip Capacity, and a Rolling Stand has a 15 Amp motor and 32-1/2" rip capacity to allow cutting of large and hardwood materials. Features tool-free guarding component adjustments and fast, accurate fence adjustments. Rolling stand designed for easy set up and breakdown with excellent stability.

FEATURES

• Rack & Pinion Telescoping Fence System Make fence adjustments fast, smooth and accurate
• Patented material support, can be used for narrow rip cuts
• Rolling stand designed for easy set up and breakdown with excellent stability
• Telescoping fence rails retract to create a small, portable package
• Flip over ripping fence allows for narrow rip cuts

• 2-1/2" Dust Collection Port easily connects to a vacuum for efficient dust extraction
• 3-1/8" depth-of-cut at 90 and 2-1/4" at 45
• 21-7/8" X 26 - 3/8" table provides superior material support

60-Tooth Crosscutting and 32-Tooth General Purpose 10-Inch Saw Blade

FEATURES

• Thin kerf design for smooth, fast cutting
• Ultra sharp construction carbide for long life and clean cuts
• Anti-kick back shoulder increases durability and helps prevent binding

Product description

The SPT70WT-ST is designed exclusively for use with the SKILSAW SPT70WT-01 10 in. portable Worm Drive table saw. The stand features tool-less latches to secure saw to stand quickly. Users can level stand on uneven surfaces with easy leveling adjustment. The portable jobsite stand is lightweight with a folding design for easy setup and transportation.

• Exclusively designed for use with SKILSAW SPT70WT-01 10 In. Portable Worm Drive Table Saw
• Folding design and tool-less latches provide for fast and easy setup and transportation
• Easy leveling adjustments
• Durable all-steel design
• Only 14 lbs. for effortless portability

User questions & answers

Question:	Can a ridgid brand table saw attach to this item
Answer:	This table saw stand is designed specifically for the Skilsaw Worm Drive Table Saw SPT70WT-22. It has not been tested for use with other brands or models.
Question:	Will this work for a skilsaw
Answer:	Excellent question! It will not, as this stand was exclusively designed for use with SKILSAW SPT70WT-01.
Question:	Could someone please provide the dimensions of the top part where the saw sits? Thanks
Answer:	I don't have the stand, but at Home Depot I measured the Skil SPT70WT table saw's bottom rails that fit to it, which must be close to the same - they sit right over it. The table saw base is a rectangle of steel tubes, so there are inside and outside dimensions. The tubes are 1-1/4" OD. Tbl saw base Inside dimensions : 21-5/8" x 17-1/2" Tbl saw base Outside dimensions : 24-1/8" x 20" From the photos, it looks like the stand might be a tad longer in the longer (width) dimension.
Question:	Will this work with the SPT
Answer:	Hi Terry! This stand is exclusively compatible with our SPT70WT-01 10" Portable Worm Drive Table Saw. Thanks for your question!

Product description

durable, rugged and offers unparalleled value. includes innovative material support legs that allow upright storage of materials and easy cutting. easy-to-fold steady feet for all-surface use. With fast-open legs, setup is straightforward and simple. Powder-coated and zinc-plated steel prevents corrosion and withstands rigorous environments. easy carry handle for effortless transport and rolled edges for safety and comfort. 100% steel construction 2 positions 2x4 support arms create a sturdy jobsite table 2200 lb /1000kg capacity each pair Material support legs

• sales for a pair (2 pieces of KF3003)
• 2 positions 2x4 support arms create a sturdy jobsite table patent pending
• 2200 lb /1000kg capacity each
• 100% steel construction
• Material support legs

User questions & answers

Question:	What is the expanded height of this sawhorse? not the stored height
Answer:	They DON’T. If so I don’t see it. Only thing adjustable is the height of the 2X4 holder
Question:	How stupid is this manufacturer for not providing the overall height of this product
Answer:	I ordered a set of these and after waiting a month I cancelled the order because they didn't know when they could deliver.