13 best jet bandsaw for woodworking

• Motor: 1 HP, 110V/220V, single-phase, TEFC, 1725 RPM, prewired 110V
• Amps: 11A at 110V, 5.5A at 220V
• Table size: 14" x 14" x 1-1/2"
• Table tilt: 45 deg. right, 10 deg. left
• Floor to table height: 43"

User questions & answers

Question:	Product description says this saw has wheels. Another question about using a mobile base....does the stand have wheels or not
Answer:	It does not come with wheels. You have to either add 4 wheels or purchase a mobile base. The trick about adding 4 wheels is that it is difficult to find wheels that can support the weight, but that don't raise the height too much.
Question:	is it made in china
Answer:	This machine is manufactured in Taiwan.
Question:	what base would be compatible with this saw so I could roll it out of the way when not in use
Answer:	We recommend Shop Fox's D2057 Heavy Duty- Mobile base.
Question:	what is the packing/shipping size of this item
Answer:	Not sure about the exact size but it’s delivered in a pallet. Very heavy

Product features

Great bandsaw!

The G0555LX 14" Deluxe Bandsaw has many of the same great specifications and features as our extremely popular G0555. However, this great bandsaw also includes computer-balanced cast-iron wheels, rack-and-pinion guide post adjustment for the upper blade guides, and a sturdy T-shaped fence design.

Ball Bearing Blade Guides

Precision Cast-Iron Table

Cast-Iron Frame

Cast-Iron Wheels with Urethane Tires

Specification

• Motor: 1 HP, 110V/220V, single-phase, TEFC, 1725 RPM, prewired 110V

• Amps: 11A at 110V, 5.5A at 220V

• Table size: 14" x 14" x 1-1/2"

• Table tilt: 45 deg. right, 10 deg. left

• Floor to table height: 43"

• Cutting capacity/throat: 13-1/2"

• Maximum cutting height: 6"Blade size: 92-1/2" - 93-1/2" (1/8" to 3/4" wide)

• Blade speed: 1800, 3100 FPM

Features

Cast Iron Wheels

Quick Blade Tension Release

Lockable Switch with Padlock

Rack-And-Pinion Guide Post

Sturdy T-Shape Fence Design

Ball Bearing Blade Guides and Thrust Bearings

Heavy Gauge Steel Stand

Product description

JET HVBS-712D 7"x12" Deluxe Horizontal/Vertical Bandsaw (414560)

• HORIZONTAL OR VERTICAL POSTIONS: Large 9" x 12" infeed table assembly extends the support area.
• REPEATABILITY: Micro-adjustable tool-less material stop for accurate set-up.
• DURABILITY: Blade wheels are made from flanged cast iron.
• LONGER BLADE LIFE: Base contains a coolant system that helps to increase cutting efficiency and blade life.
• CSA/CUS CERTIFIED: This saw follows strict guidelines and electrical requirements.

User questions & answers

Question:	Does the free prime shipping include lift gate service
Answer:	Tengo un cargador
Question:	I am having issues locationg where it specifies what square and round diameter steel it will cut
Answer:	Yes, it does.
Question:	How much assembly is required for this bandsaw upon delivery
Answer:	This machine uses a grinding head with a diameter of 2.35mm. If your grinding head diameter meets this range, you can use it
Question:	will this cut 6"X6" square aluminum tubing
Answer:	All that is needed for this size reservoir to fit is an appropriate sized pack with a pocket in which to place it. I have found that many packs I have actually have pretty generous "pockets" dedicated to the reservoir itself and I can finagle an extra 100 oz bladder in alongside the first one with both filled to capacity. Yeah, it will be snug and you'll need to stow the extra tube/bite valve, etc., but on those really long hiking, hunting biking trips, having the extra water available that doesn't impinge on other storage areas is helpful. Obviously, if you are using a minimalist pack for, say, running, they don't have the extra room to accomplish what I suggest. But for those pack that do have the room, a spare reservoir filled with ice and water for those long, hot, dusty, treks will be more than appreciated when you are between water stations.

Product features

JET HVBS-712d, 7" X 12" Deluxe Horizontal / Vertical Bandsaw

The JET HVBS-712D Deluxe Horizontal/Vertical Metalworking Bandsaw has everything any operator needs to tackle even the toughest job. Increased the width and height of the stand and added new features that exceed expectations. The HVBS-712D is another innovative JET product packed with features you’ve come to expect.

Features:

Large 10" x 12" infeed table assembly extends the support area and can be used in either horizontal or vertical positions.

Multi-position blade guides enhance use in vertical position by increasing the throat capacity from 4" to 8" and creates a safer working position.

Tool-less quick lock vise with preset mitering positions at 15°, 30° & 45°.

Improved Height and width of stand with built-in storage cabinet and chip tray.

Micro adjustable tool-less material stop for accurate set-up and repeatability.

Product description

JET 3-Speed Bandsaw Pulley Kit (708114)

From the Manufacturer

Converts 14" band saws to run at three speeds--735; 1,470 and 2,350 SFPM. Includes all mounting hardware and detailed installation instructions.

• 4-STEP MOTOR PULLEY ASSEMBLY
• CONVERTS 14" BANDSAWS TO RUN AT THREE SPEEDS: 735/1,470/2,350 SFPM
• INCLUDES MOUNTING HARDWARE

User questions & answers

Question:	Can I use this on the new Powermatic 14 inch bandsaw
Answer:	My Powermatic did not have the V Belt that this kit uses. I had to change the top pulley to a V belt pulley to use this kit. Other than that no other issues.
Question:	Is the cabinet included
Answer:	No it does not. The cabinet comes with the JET saw at purchase.
Question:	Will this fit modei jwbs-14cs
Answer:	I purchased the 3-speed kit for my JSBS-14CS and it fit perfectly. You should note that with this kit your highest speed will be reduced a bit as compared to the single-speed operation without this kit. The installation instructions were easy to follow and the installation was fairly easy.
Question:	will it fit on an older 14" Delta saw
Answer:	It fit on my 05

Product description

General’s 14” wood cutting band saw is ideal for any shop. It’s designed for hard or soft woods. Featuring a tilting table for angles up to 45 degrees. This woodworking band saw is on a sturdy stand with balanced wheels that can handle a variety of woodworking bandsaw needs.

• ACCURACY & PRECISION - Precision upper & lower ball bearing blade guides, provide blade stability improving cut accuracy.
• EFFICIENT CUTTING - 1 HP TEFC (Totally enclosed fan cooled) motor easily handles various bandsaw cutting needs.
• MULTIPLE CUTTING SPEEDS - Two cutting speeds (1575 & 3280 SFM), for excellent results in either hard or soft woods
• UNIQUE DESIGN - Tilting table allows table to be tilted out to 45 degrees, right, or any angle between 0-45 degrees. One-piece welded frame design reduces bandsaw vibration.
• PRODUCT SPECS - Wheel size: 14", Wheel speeds : 436 & 909 rpm, Blade speeds : 1575 & 3280 lin. Fpm, Blade width: 1/8"-3/4", Blade Length: 100-3/4",

User questions & answers

Question:	How thick of material can it saw
Answer:	No, a case is not available.
Question:	What is the resaw capacity
Answer:	The part number for the rip fence is 858274.
Question:	How well does it cut hard woods
Answer:	Stroke Length = 3/4 in
Question:	can you tell me the resaw cap. of this bandsaw
Answer:	No, the BLACK+DECKER and CRAFTSMAN products are not compatible.

Product description

The Rikon Deluxe 10-3061 Bandsaw is just what you need in a benchtop bandsaw. The powerful 1/2HP motor with a cutting capacity of 5” high and 9-5/8” wide means you can cut nearly anything. Two different blade speeds let you speed up or slow down the blade based on the material size and density. The complete unit has a wide front guide rail with adjustable scale, sturdy cam-lock fence carrier with wide panel, and a 2-3/8” tall x 12-1/4” long aluminum fence extrusion. The 2-1/2” OD dust port fits most standard shop vac hoses making it easy to keep your work area clean. Specifications:  Motor: 1/2HP, 5.5Amp, 110V (60Hz), 1720RPM, Blade Length: 70-1/2”, Blade Width: 1/8” to 1/2” (Note: 1/8” blade requires aftermarket blade stabilizer), Blade Speeds: 1515 or 3280 ft/min, Cutting Capacity Height: 5”, Cutting Capacity Width: 9-5/8”, Table Size: 13-3/4” x 12-1/2”, Table Tilt: 5 degrees left, 45 degrees right, Miter Gauge Slot Size: 5/8” x 1/4”, Height to Base: 14-1/2”, Height to Floor (with optional open stand): 39-7/8”, Fence Size: 12-1/4” x 2-3/8”, Dust Port Size: 2-1/2” OD, 2-1/4” ID, Base Size: 15-7/8” W x 9-3/8” D, Overall Size: 34-1/4” H x 21” W x 16-1/4” D, Machine Weight: 77.5 lb., Shipping Weight: 86 lb. 

• HIGH QUALITY MACHINE – This product includes the 10-3061 Deluxe Bandsaw and 5/16” x 70-1/2” 6TPI bandsaw blade. Great for producing smooth cuts in wood, metal, and more, this machine is perfect for any craftsman's project. Toggle between two different blade speeds to cut nearly anything.
• MOTOR DETAILS - The increased cutting capacity and increased 1/2HP motor make this bandsaw great for small to medium sized projects. Motor: 1/2HP, 5.5Amp, 110V (60Hz), 1720RPM, Blade Speeds: 1515 or 3280 ft/min
• TABLE DETAILS - The tilting, 0-45° cast iron table makes for easy operation. Table Size: 13-3/4” x 12-1/2”, Table Tilt: 5 degrees left, 45 degrees right
• DIMENSIONS – Fence Size: 12-1/4” x 2-3/8”, Dust Port Size: 2-1/2” OD, 2-1/4” ID, Base Size: 15-7/8” W x 9-3/8” D, Overall Size: 34-1/4” H x 21” W x 16-1/4” D
• FEATURES – Features tool-less blade guides; quick-release blade tension lever; large blade tracking knob and viewing window; dust port for shop vacuum hookup; and a safety paddle on/off switch. Comes with 5/16" x 6TPI regular blade and a 5-year limited warranty. RIKON Power Tools is dedicated to designing and manufacturing woodworking machinery of the highest quality that enhances the woodworking experience.

User questions & answers

Question:	Any problems resawing 8-foot 2x4’s into 1x4’s
Answer:	Mine stop working the fifth time using it. Resawing a small piece of oak, the motor just gave up. Also i was unable to create an account with them because PR is not in the states/country list, so i was unable to get a warranty. Wasted my money, buy a good bandsaw don't waste your money.
Question:	Can I put a riser block on this saw
Answer:	Unfortunately you cannot add a riser block. This bandsaw has a relatively small resaw capacity, so if this is a feature that’s important to you, I might stick with another one.
Question:	diamensions of saw
Answer:	Thank you for your question about the RIKON 10-3061 Improved 10" Deluxe Bandsaw 1/2 HP, 2 speed, Tool-Less Guides. The dimensions of the saw are: Overall Height: 34-1/4in. Overall Width: 21in. Overall Depth: 16-1/4in. Base Size: 15-7/8in. x 9-3/8in. Dust Port: 2-1/2in. O.D., 2-1/4in. I.D. Net Weight: 77.5 lbs. Amps: 5.5 Volts: 110V, 60Hz Please let us know if you have any other questions or concerns. Thank you again, and have a wonderful day!
Question:	What are the dimensions of the column itself? (Width x depth; height not needed, for mounting aux. miter gauge, etc
Answer:	The width including mounted miter gauge is 23 1/2” X 15” deep.

Product description

Will fit other brands and models that use this size thrust bearing.

• Thrust Bearing Set for 14" Jet Band Saws. Set of 2.
• These fit both the upper and lower positions.
• Bearings have a 10mm ID, 30mm OD, and are 9mm thick.
• These are sold under Jet part numbers: BB-6200ZZ & 9100441
• Fits all JET JWBS-14 Series Models except the JWBS-14DXPRO.

User questions & answers

Question:	What are the id/od and width of the bearing
Answer:	Please refer to listing for details including the bearing dimensions, part number, and product application details.
Question:	Will fit with jet jwbs-14sfx? new model
Answer:	No. They will not fit the upper or the lower guide.

Product description

Will fit other brands and models that use this size thrust bearing.

• Thrust Bearing Set for JWBS-14DXPRO" Jet Band Saws. Set of 10.
• Full set to replace both the upper and lower positions.
• Bearings have a 8mm ID, 22mm OD, and are 7mm thick.
• These are sold under Jet part numbers: BB-608ZZ
• This bearing set is for the DXPRO model only

Product description

The JMG-14 adjustable miter gauge accompanies the JWBS-14 and allows for accurate angled cuts. Includes a 6" x 1" diameter resaw attachment for added versatility.

From the Manufacturer

Accessory for JWBS-14OS. This miter gauge can be used for both straight and angled operations.

• COMPATIBLE WITH JET 14" BANDSAWS
• PIVOTS 30° LEFT/RIGHT TO FACILITATE ANGLED CUTS
• COMPACT
• LIGHTWEIGHT

User questions & answers

Question:	What is the thickness of the steel bar? 1/4" or
Answer:	The bar is 3/8"
Question:	Will the miter gauge form my JET table saw work on the JET Bandsaw
Answer:	I have an older model table saw with a small washer in the end of the miter gauge which eliminates all side play. It will not work in the Bandsaw (both are JET).
Question:	anyone find a 3rd party mitre unit - really want a good fit and angle stops
Answer:	I bought the Jet aftermarket miter gauge. It seems to work just find, although it's not something I use a lot with the bandsaw, so there may yet be troubles to be discovered. I did think the protractor head was a trifle small, and the slide could be a bit longer.
Question:	What material is the miter guage made of ,and is there a handle included
Answer:	The long guide part is steel the rest seems to aluminum. No real handle just the large screw knob for adjusting the angle. Has been sturdy enough for me.

Product description

The Rikon 10-Inch Bandsaw Model 10-305 offers all of the same quality features found in larger bandsaws. Includes 1/3HP motor, cast iron table and 4-5/8-Inch re-saw capacity. The 10-305 also includes a fence and micro adjustable guide post height. A 2-1/2-Inch dust port keeps your work area clear of dust.

• Solid Steel Design- The 10-305 is a scaled down version of the popular 10-345 and 10-325. Frame is made of steel plate, stronger than plastic frames used by other manufactures
• Cast Iron Table-Large 13-3/4-Inch by 12-1/2-Inch sturdy work surface, a feature not typically found on a bandsaw of this size
• Rip Fence- A quality rip fence is now included. Easily removed to do free hand work
• Motor - 1/3HP motor provides ample power for cutting bowl and pen blanks
• Micro Adjustable Guide Post- Raise and lower the guide post height with the turn of a handle

User questions & answers

Question:	What's the maximum cutting height capacity? (i need at least
Answer:	Our band saw can do that, the only thing you need to do is buying a band saw stand .
Question:	did not get ban saw or money back
Answer:	Yes it is 110 volt
Question:	Can it cut through a 4" round stock of aluminum
Answer:	No
Question:	I nee to cut a curve on some 4" thick oak braces, could this saw handle the task
Answer:	NO

Product features

Model 10-305: 10″ Bandsaw

10” Bandsaw #10-305 is a favorite of woodworkers and hobbyists that do not require large cutting capacity and power for their projects, or have limited shop space for a larger size bandsaw. Includes features for easy operation – tilting 0-45° table, rip fence, large blade tension knob, dust port for shop vacuum hookup, and safety paddle on/off switch. Reduced size is ideal for transporting, or storing, when not in use. Includes rip fence. Steel stand (#13-913) and a miter gauge are available separately.

• 4-5/8″ Re-Saw Capacity
• Edge Facing Thrust Bearings
• Large Cast Iron Table
• Safety Paddle Switch
• Includes 2″ Tall Fence
• 2-1/2″ (O.D.) Dust Port

Product description

This economical, portable, easy-to-use, 3-speed bandsaw is an excellent choice for small or large projects where you must cut a variety of metals, plastics, or wood. When the vertical cutting attachment is installed, the saw is able to make vertical cuts for your unique cutting requirements.

• Motor: 3/4 HP, 110V, single-phase 1,725 RPM
• Blade speeds: 78 FPM @ 40 RPM, 108 FPM @ 60 RPM, 180 FPM @ 80 RPM
• Blade size: 64-1/2" x 1/2" x 0.025"
• Handles and wheels for portability, Blade included
• Automatic shutoff

User questions & answers

Question:	What are the cutting size capacities @ 90 degrees and @ 45 degrees
Answer:	The saw will use a model number 3LT215 V belt.
Question:	What size belt doea the 1715 take
Answer:	CHECK THE GEAR MESH!!! I have this saw, the mechanical advantage through the worm gear gives that motor 5x torque 5:1.. I just finished playing hell with mine. The brass gear would slip down through the mounting hole causing the gears to mesh too tight. My factory oil/grease could not have been brass colored. To check, simply remove drive belt and spin the drive whee pulley. (It should have very little resistance)
Question:	Is there a generic v-belt replacement for the shop fox w1715? the s fox part id doesn't go by the standard size/type code for v-belts
Answer:	Dear customer thanks for your asking the 26mm adapter mount fit with 23.2mm interior eyepiece It can be done without using a swit microscope hope it could help you anything else we can help, please kindly let us know thanks and best regards Lily
Question:	Any suggestions to stop binding when cutting 3" rectangular sign post metal? Motor seems underpowered
Answer:	Dear customer, Thanks for your asking, Sorry for your inconvenience,because the diameter of the eyepieces is different, the 10X eyepiece of SW100 uses a 26mm mobile phone holder, and the 25X eyepiece uses a 28mm mobile phone holder, thank you. Anything else we can help, please kindly let us know. Thanks and best regards Susan Swift Official Customer Service

Product features

Shop Fox W1715 Metal Cutting Bandsaw

This economical, portable, easy-to-use, 3-speed bandsaw is an excellent choice for small or large projects where you must cut a variety of metals, plastics, or wood. When the vertical cutting attachment is installed, the saw is able to make vertical cuts for your unique cutting requirements.

Three Cutting Speeds

The W1715 is capable of operating at 78, 108, or 180 FPM. The speed can easily be adjusted by changing the V-belt placement. The three cutting speeds allow this bandsaw to cut a variety of stock with varying hardness.

Built-In Mobile Base

The W1715 features a built-in mobile base to easily move the machine to its desired location. The compact design takes up very little space and is ideal for shop with limited floor space.

Vise Included for Horizontal Operation

This bandsaw includes a vise for holding workpieces during horizontal cutting operations. The vise is capable of holding stock for angle cuts ranging from 0 to 60-degrees.

Horizontal or Vertical Cutting

The Model W1715 can easily be set up for vertical cutting operations to make cuts that are not a straight cut through the entire workpiece, such as curves or pattern cuts.

Horizontal Cutting

The W1715 features a cast iron stop for use when making horizontal cuts. The stop allows you to get consistent results when performing repeat cuts at the same length for efficient production.

Feed Rate

The W1715 feed rate is controlled by a spring and handle. Slower Feed Rate is achieved by twisting the handle clockwise to add tension to the spring while the faster feed rate is achieved by twisting the handle counterclockwise to remove tension from the spring.

Product description

"Remember when power tools were actually powerful? Reminiscent of your Grandpa’s bandsaw, the WEN 10-Inch Two-Speed Band Saw is the perfect companion for any workshop. With a 3.5-amp motor and a 9-3/4 inch throat, this beast will attack boards with cuts up to six inches deep and 9-3/4 inches wide. Two-speed operation allows for speeds of either 1520 or 2620 FPM. The design of this saw uses 72-inch blades anywhere from 1/8 to 1/2 inches in size for a variety of both intricate and powerful cuts. The spacious work table measures in at 14 x 12-1/2 inches in size and can be swiveled up to 45 degrees. This package includes a flexible work light to illuminate the worktable, a 3-in-1 dust port to fit a variety of dust extractor hoses (1-3/4, 2-3/4, 4 inches), a fence for creating straight cuts, a miter gauge for angled cuts, and a stand. Ball-bearings give the blade smooth operation and a long lasting life for years of dependable service. The easy-to-assemble stand elevates the bandsaw without sacrificing space on the shop’s work bench. And because it’s a WEN product, your WEN 10-Inch Two-Speed Band Saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly and helpful customer phone line all to make sure you remember WEN. Remember when you had a versatile and powerful woodworking saw? Remember WEN."

• 3.5 amp motor creates cuts up to six inches deep and 9-3/4 inches wide
• Uses 72-inch blades anywhere from 1/8 to 1/2 inches in size
• Spacious 14-1/8 x 12-1/2 inch work table bevels up to 45 degrees
• Operates at two speeds of either 1520 or 2620 FPM
• Optional stand allows for either floor standing or bench top applications
• Includes a 2-year warranty, a stand, a work light, a 3-in-1 dust port, a fence, a miter gauge, and a 3/8-inch blade (6 TPI)

User questions & answers

Question:	When centering the blade on the tires, should the blade or the gullets be centered
Answer:	According to Alex Snodgrass the band saw guru with Carter power tools, the gullet of the blade is what should be centered on the tire.
Question:	Do I have to buy the 72 inch blades, or is there some room for a 72 7/16 blade to fit it
Answer:	I don’t have a different answer, but I feel bad for the person that has 21 downvotes, because they’re not wrong. This saw is available in 3 sizes. 72 is for the 10”, 62 is for the 9”. Sorry, ccbdav. Don’t let em get you down.
Question:	Has anyone used this tool to cut thru 4 inch oak? For example table legs
Answer:	The blade that came with it is actually not bad at all as I cut a 5 inch diameter oak log from a chopped tree in my back yard down to a 3"x 3" x 2' piece of usable lumber. I was impressed. I later bought a bi-metal 1/2" 14TPI blade and installed it for metal cutting. It did cut with no effort a 1" thick T6 aluminum. I am not sure if if can do thicker as I did not try it. I also cut 1/2 mild steel bar with no problem at all. No binding or stalling. All the cuts of wood or metal were straight. You just have to let the blade do the work and not force feed it through
Question:	Where is it manufactured
Answer:	There's a tiny island off the north west coast of Mauritius called Gelff. Not even on most maps. Discovered by captain James Cook in 1752. In 1754 Gelff, represented by James Cook in Spanish courts, was granted sole manufacturer of the WEN 3962 Two-Speed benchtop bandsaw. Raw materials are brought in on one side of the island. Some kind of assembly/manufacturing factory must be inland somewhere, they don't allow access to the interior. The fact that this is such a fine product becomes obvious when one visits the far side of Gelff, where cargo ships are waiting to load and deliver this product around the world.

Product features

WEN Two-Speed 10-Inch Bandsaw with Stand

Remember when power tools were actually powerful? With a 3.5-amp motor and a 9-3/4 inch throat, the WEN 10-Inch Two-Speed Band Saw will glide through boards with cuts up to six inches deep. This saw uses 72-inch blades anywhere from 1/8 to 1/2 inches in size for both intricate and powerful cuts. The spacious work table measures in at 14 x 12-1/2 inches in size and can be swiveled up to 45°. Two-speed operation allows for speeds of either 1520 or 2620 FPM. Ball-bearings give the 10-inch wheels smooth operation and a long life for years of dependable service. The easy-to-assemble stand elevates the band saw without sacrificing space on the shop's work bench.

3-in-1 Dust Port

The WEN Band Saw includes a 3-in-1 Dust Port to fit a variety of dust collection hose sizes (1-3/4, 2-3/4, 4 inches).

Two-Speed Operation

Run the blade at either 1520 or 2620 feet per minute to meet the needs of any given project.

Variety of Blade Options

Use 72-inch blades anywhere from 1/8 to 1/2 of an inch in size depending on the intricacies needed.

Bevel Cuts from 0° to 45°

Create angled cuts up to six inches in depth by beveling the 14-1/8 x 12-1/2-inch table up to 45° to the right.

Equipped with a full 6 inches of resaw capacity

Remember when you could cut wood up to 6 inches thick in a single pass? The WEN 10-Inch Two-Speed Band Saw provides you the capacity to attack boards up to six inches thick. Combine this with the 9-3/4-inch throat for a machine that can take on more wood than other 10-inch band saws.

Packed with additional accessories

The WEN Band Saw includes a flexible worklight to illuminate your work piece, a sturdy fence for creating straight cuts, a miter gauge to cut along specific angles, a 3-in-1 dust port to meet the needs of a variety of dust collection hoses, and a 25-inch stand to keep the band saw elevated.

• Motor: 1 HP, 110V/220V, single-phase, prewired 110V
• Pump motor: 1/8 HP, 110V/220V, single-phase, prewired 110V
• Drive: Sealed worm gear
• Blade size: 82" x 3/4"
• Included blade size: 82" x 3/4" x 4/6 VP TPI (similar to Grizzly model H9726)

User questions & answers

Question:	mine breaks blades constantly has anyone else experienced this/come up with any solutions
Answer:	It works exceptionaly well. Select slow speed.
Question:	How many years of manufacturer warranty
Answer:	Other than the work stop, which bolts to the base, no. I didn’t install it and probably won’t.
Question:	The motor says 110 v but the pump says 220v? what is it
Answer:	Any big box store.

Product features

7" x 8-1/4" Swivel Mast Metal-Cutting Bandsaw

This saw is built for accuracy and production! Easy angle set-ups between 0 and 60 degrees means no wasted time between cuts. Lever controlled blade guide locks allow adjustments right up to the work piece for optimum support and the blade guides have fully adjustable ball bearings so you know you're going to get straight cuts. And when you're done, use the quick release lever and stock length stop to get on with the next cut. It's fast and simple to use!

Lever Controlled Blade Guide Blocks

Deep-Throated Vise With Lever Lock

Adjustable Stock Length Work Stop

Headstock Lift Arm and Handle

Specificiations:

• Motor: 1 HP, 110V/220V, single-phase, prewired 110V
• Pump motor: 1/8 HP, 110V/220V, single-phase, prewired 110V
• Drive: Sealed worm gear
• Blade size: 82" x 3/4"
• Included blade size: 82" x 3/4" x 4/6 VP TPI (similar to Grizzly model H9726)
• Blade speed: 314 FPM
• Miter cutting capacity: 0° to 60°
• Approximate shipping weight: 460 lbs.

Product description

How many times have you wanted more room in your shop? Or to be able to move a large machine tool quickly and easily. Now you can with the HTC-2000 Adjustable Mobile Base. This rock solid, fully adjustable mobile base features side rails and corner pieces with holes spaced every 1 inch to insure the perfect fit for your machine. It’s ideal for bandsaws, table saws, sanders, drill presses, jointers, planers, and much more. Even non-machine items like file cabinets and safes can be made fully mobile. You can move your machines to wherever you like, and once there, rigidly lock them into place with a quick press of the industrial strength foot lever. The base is sturdy and easy to assemble, and can support up to 500 lbs. Plus it adjusts to fit virtually any large woodworking machine, forming squares from 12x12 inches to 36x36 inches, and rectangles as large as 20x52 inches. Holes at 1-inch increments let you choose any shape in-between. We’ve seen shops with several of these, allowing for unmatched mobility as you wheel out the machine you need, and then glide it back out of the way when finished, essentially doubling or tripling your work area. This mobile base includes everything to make your machine mobile, and is backed by a limited lifetime warrantee.

Adjustable Mobile Base

• WEIGHT CAPACITY: The rugged HTC-2000 has a 500-lb weight capacity so even your heavy machines can now be mobilized
• ADJUSTABLE TO SUITE YOUR NEEDS: This mobile base expands from 12x12 inches to 34x34 inches square, and an 18x50 inch rectangle - all in one-inch increments. Max square size: 34x34 inches
• ROCK SOLID STABILITY: Easy to use foot levers lock and unlock wheels for quick easy mobility and stability when you need it.
• HEAVY DUTY: The HTC-200 by HTC is constructed of heavy-duty steel rails and has 3-inch heavy duty rubber caster wheels for easy roll.
• LOW PROFILE: This rolling mobile base increases machine height by less than 1-inch so it won’t interfere with tool operation

User questions & answers

Question:	Would this work for a stacked washer/dryer? It is in front of the hot water heater in a small narrow closet
Answer:	Yes you are able to remove the bracket before mounting to the wall.
Question:	Has anyone used this base with a drill press? I have a 17" Jet drill press
Answer:	This comes with a 180 degree steel swivel mounting bracket. The ability to be mounted vertically or horizontally.
Question:	I need a replacement part for Htc 2000. What is their website address
Answer:	Yes. This comes with a Hybrid Hose and the temp range is: -40 degrees to +150 degrees F.
Question:	Not exactly clear on the dimensions this base will adjust to. Will this base accommodate a rectangle 24.5" x
Answer:	This is made in China.

Product features

HTC-2000 Adjustable Mobile Base by HTC

Organize your shop safely and easily with the HTC-2000 Adjustable Mobile Base. It provides increased mobility and productivity and makes moving heavy machinery and equipment easier and more manageable.

Locking Foot Levers

The large, industrial-grade metal foot-operated levers lock machines to the floor a mere 3/4 inches above the ground, making moving heavier machines a breeze. The base also features a durable powder-coated finish.

Move Almost Any Machine

This fully adjustable mobile base features side rails and corner pieces with holes spaced every inch to insure the perfect fit for your machine. Move bandsaws, table saws, sanders, drill presses, jointers, planers, and much more. The HTC-2000 has a weight capacity of up to 500 pounds.

Adjustable

This heavy duty adjustable base is sturdy and easy to assemble, plus it adjusts to fit virtually any large woodworking machine, expanding from a 12x12 inch square up a to 34x34 inch square. A 18 x 50 inch rectangle is also achievable.