13 best saw blade for heavies

• 【Cobalt Teeth】 M42 with cobalt teeth makes the blade resist high temperatures on heavy metal cutting demolition works.
• 【Metal Master】 Hard cobalt edge provide effortless cutting into sheet metal, metal pipe and profile.
• 【Optimized Design】 Enhanced version of the blade is more wear-resistant for cutting heavy metals show better performance.
• 【Cutting Range】 Medium-thick sheet metals (3 to 10mm), metal pipes/profiles (dia.<175mm)
• 【Universal shank】 1/2 inch shank fits all Sawzall tools on the market including Bosch, Dewalt, Milwaukee Sawzall Saw, SKIL, Makita, Black & Decker, Ryobi, Porter Cable, Hitachi, Flex, Hilti, Metabo and more.

User questions & answers

Question:	Would these work to cut apart a rought iron/metal trellis that is about a 1/3 of an inch thick? Thanks
Answer:	I haven't used it for such thick metal, but the saw has a lot of power and I expect it would work. You need a blade appropriate for metal.
Question:	Anyone have any idea if these will cut through 3 inch cast iron drain pipe
Answer:	I haven't tried it, BUT I would say yes, in general, but do so at your own risk. You almost never know exactly what you are getting with cast (especially old-school castings)--as in what the components are that make up the casting unless it's documented. I do know that 8% impregnated cobalt (as opposed to a 3-5% coating) is pretty good for the work I've personally done on stainless drilling holes, and cast is usually way softer compared to stainless. Cast has also generally machined really well on my lathe and mill. I recommend using a cutting fluid like tap magic or similar, and take it slow and easy. The rule of thumb I've used / personally seen is either use zero lubrication or use a lot. I usually opt for a lot of cutting fluid. It seems to work better for me, but it is a bit messier, and if I go too fast, the cutting fluid will start to smoke, so please be aware that could happen to you. Good luck.
Question:	will this blade cut Stainless steel pipes
Answer:	Dear customer, if you want to cut stainless steel, you need oil on blade and make your sawzall running in low speed. Although we supply great reciprocating saw blades, frankly, if you cut with full power, the teeth will gone very fast. This is out of the bi-metal blades cutting range.
Question:	Does it fit a Ryobi reciprocating saw
Answer:	Yes all EZARC reciprocating saw blades have 1/2 inch universal shanks, there's no problem to fit most sawzall in the market including Ryobi, Skil, Dewalt, Bosch, Makita, Black+Decker, Milwaukee, Porter-Cable, and more

Product features

EZARC PLUMBER EX Reciprocating Saw Blades for Heavy Metal

M42 with cobalt teeth makes the blade resist high temperature on heavy metal cutting.

• Model Number: R926PM+
• Total Length: 9'' (225mm)
• Cutting Length: 175mm
• Blade Material: Bi-Metal with 8% Cobalt
• Teeth Per Inch: 14TPI
• Blade thickness: 1.1mm
• Cutting Material: Medium-thick sheet metals (3 to 8mm), metal pipes/profiles (dia.<175mm)
• Universal 1/2"shank fits: Reciprocating saws including Bosch, Hitachi, Flex, Makita, Black+Decker, Milwaukee, skil and more

Bi-Metal Teeth with 8% Cobalt

PLUMBER EX Reciprocating Saw Blades for Heavy Metal Cutting

• Enhanced version of the blade is more wear-resistant for cutting heavy metals show better performance.
• Medium-thick sheet metals (3 to 10mm), metal pipes/profiles (dia.<175mm)

Quality Raw Materials

EZARC uses the best technology in the industry and offers carefully crafted accessories from the USA optimized for specific materials and applications.

With 8% Cobalt Teeth

M42 with cobalt teeth makes the blade resist high temperatures on heavy metal cutting demolition works.

Engineering for Extreme Cuts

Hard cobalt edge provide effortless cutting into sheet metal, metal pipe and profile.

EZARC Full Range Reciprocating Saw Blades

Product description

Freud DS0908CF Steel Demon Carbide-Tipped Reciprocating Blades for Thick Metal Cutting, 9"

• High performance carbide for greater durability and cutting performance in metals with a thickness from 3/16" to 9/16"
• Enhanced carbide tip to blade connection for extreme impact resistance
• 1 in. oversized blade body for straighter cuts with less vibration
• Single Blade
• Imported

User questions & answers

Question:	How long will the blade take to cut 4" hub cast iron pipe? the extra heavy variety
Answer:	I'm not sure as I don't have a pneumatic reciprocating saw. The connecting ends do fit all tool less blade connectors on traditional electric saws. Sorry I don't have the specifics for pneumatic tools.
Question:	Is this strong enough to through the steel cables in a car tire
Answer:	Yes, it cuts through that type of metal.
Question:	anyone used this to cut cement backer board? looking to cut some holes for the faucets in a shower
Answer:	Compared to other brands these are the best I! I don’t know how to put it but I’ve never seen any other blade manufacturers make a blade then make another that wud b better ! But I can say there regular blades tell you there 5 times better than a regular one and the carbide ones tell you there 50 times better . Wow that’s crazy good ! Ive had nothing but a great experience with these blades they bend a still keep on cutting. I curantly keep my old ones and make knife blades outta them the metal is just to good to throw away ! The steel comes from Sweden there one of the leading manufacturers of high quality steel , id say all in all what the sa they are in life is close to right but it cud b off one way or the other a little bit . The thing I can tell you is the dag gone things are tuffer than any other blade I’ve used and last longer break less ! I can’t see any other reason to buy other blades they won’t let you down !
Question:	Does this blade have the ability to do a bit of side flexing to cut up under a floor plate secured to concrete floor to get to and cut off a nail
Answer:	These blades usually fit any standard battery driven reciprecating saw. Does your makita fit any other branded blades if so it would fit diablo

Product description

Heavy Duty Metal Cutting Reciprocating Saw Blades, 12-Inch 14TPI M42 Bi-Metal +8% Cobalt Reciprocating Saw Blade For Thick Metal Fast Straight Cutting, Solid Pipes, Profiles 5-PACK

• 5-PACK, 14TPI Reciprocating Saw Blade For Heavy Metal Cutting. 12-inch blade can cover most cutting material.
• DURABLE: M42 bimetal with 8% cobalt material can effectively improve the strength, hardness and heat resistance of the reciprocating saw blade, makes the blade resist high temperaturer on heavy metal cutting, composition for extra 60% longer lifetime
• FAST: Aggressive teeth geometry design with top material provide effortless fast cutting into thick sheet metal, metal pipe and solid pipes/profile.
• Suitable blade height and flexible thin blade body is more resistant to breaking and shattering
• Works with all major reciprocating saw brands such as DeWalt, Makita, Ridgid, Milwaukee, Porter & Cable, Skil, Ryobi, Black & Decker, Bosch, Hitachi.

User questions & answers

Question:	How thick of metal can these cut
Answer:	If you’re cutting pvc pipe for installation and want a clean edge with no burrs, a manual pvc specific cutter like the $20 RIDGID 41608 worked great for me. Just spin it around the pipe a few times and the spring-loaded blade cut through cleanly.

• 5+1 Value Pack ✅ 5 Pc Heavy duty Metal + 1 Pc Wood with Nails
• Premium Quality ✅ Bi-Metal strip manufactured in Japan and reinforced by 8% Cobalt for a much greater durability for thick metal cutting
• Outstanding Performance ✅ SIERRA Metal cutting blades aggressive variable 14 / 18 pitch teeth with thin kerf delivers fast and effortless cuts
• Versatile Application ✅ Thin Metal, Thick Metal, Wood, Fiberglass, Nails, Cables
• Universal & Pro Service ✅ Shank is compatible with all reciprocating saw brands. Contact us for a professional service

User questions & answers

Question:	What's that 6th blade for? the grey one
Answer:	I believe it’s for wood. I put up a review that should be up in a few days with all blades showing as in my review the metal blades are excellent. The one wood I haven’t had a chance to use yet but it’s thick and looks like v.good quality.
Question:	Are these blades designed for use with corded or cordless reciprocating saws
Answer:	It doesnt matter with the saw, as long as you have a recip saw, then they all fit.
Question:	Will it be able to cut .045IN thick iron bars
Answer:	I bought it to cut .036" metal, very easy. But you can check out that video showing it cuts .05~.08, so I guess it can do the job

Product features

LionMount [ SIERRA ] Reciprocating Saw Blades for Heavy Duty Metal Cutting

M42 w/ cobalt teeth features high heat resistance in thick metal cutting

• Range: SIERRA - AR6B2E
• Blade full length: 6'' (150mm)
• Max Cutting Length: 4in (100mm)
• Blade Material: Bi-Metal with 8% Cobalt
• Teeth: 14/18 TPI
• Blade thickness: .050in (1.27mm)
• Applications: Mid-thick metal sheets 1/8"~3.15" (3~8mm), metal pipes/profiles Dia.<4"(100mm)
• Universal 1/2" shank

Reciprocating Saw Blades for Heavy Metal Cutting

• Uneven Cobalt Teeth
• Optimized Design
• Metal Pro Cutting
• Additional 1 Piece [ Wood with Nails ] Blade

Premium Steel Applied

LionMount reciprocating saw blades were made with premium quality carbon steel.

Blade string kerf made in Japan.

Affordable Great Value

Manufactured by original factory, LionMount controlled the cost to minimum in order to sustain competitive and affordable while keeping the quality as priority.

Versatile and Trustworthy

One range of 5 blades with an Extra blade of a different range will back you up for your additional or occasional operation scene.

Product description

This blade’s specially designed triple chip tooth design produces extremely smooth, true surfaces for gluing and finish work. There is no need for sanding or jointing after the cut. The ideal working range is from 1/8" to 1" thick. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this ultimate ripping blade, there is no need for stabilizers.

Designed for serious woodworkers, the 10-inch Freud LM74R010 Glue Line Rip Saw Blade features Freud's red, non-stick Perma-SHIELD coating for friction reduction and improved durability. It pairs this coating with a heavy-duty body and 30 triple-chip teeth featuring TiCo high-density carbide tips. This combination delivers cuts that are quick, smooth, and precise, making the blade ideal for detail work.

LM74R010 Glue Line Rip Saw Blade with Perma-SHIELD At a Glance: Ideal for smooth cuts in materials that are 1/8 to 1 inch thick Heavy-duty plate with laser-cut, anti-vibration slots Tough Perma-Shield coating reduces friction and heat buildup Technical Specs: Coating Perma-SHIELD Diameter 10" Teeth 30 FLAT Arbor 5/8" Kerf (K) .118 Plate (P) .098

Depth of Cut

Heavy-Duty Thick Kerf and Plate ensure a stable, flat blade for long cutting life Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life, and giving a crisp, swirl-free flawless finish

Triple-Chip Tooth Design for Quick, Clean Finish Work

This blade's triple-chip teeth leave a finish that's true, extra smooth, and chip-free--even when you're working with brittle materials. This eliminates the need for sanding and jointing and saves you time, making the glue line rip saw blade an ideal match for gluing and finish work.

Designed for optimal performance, this blade cuts materials that are 1/8 to 1 inch thick, including hard- and softwood. This versatile blade handles crosscuts with chipboard, plywood, or laminate, and can tackle thinner or thicker materials. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 5/8-inch arbor and produces a 0.118 kerf.

Well-Balanced, Anti-Vibration Design

This Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use. Furthermore, this well-balanced, anti-vibration design means there's no need to use add-on stabilizers with this blade.

High-Density Carbide for Maximum Cutting Performance

This glue line rip saw blade's 30 teeth are finished with tips made from Freud's application-specific TiCo high-density carbide "ripping blend." This blend offers a mix of improved density, hardness, corrosion resistance, heat resistance, and impact resistance that's ideally matched to the demands of ripping large quantities of soft or hard wood.

With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening, and will hold up longer--once again, saving you time and money.

Perma-SHIELD Coating Reduces Friction and Heat Buildup

Built to withstand tough use in less-than-ideal conditions, this blade is finished with Freud's red Perma-SHIELD--a non-stick coating that reduces friction and nearly eliminates the heat buildup that excess friction can cause. By providing complete thermal insulation, this coating protects your tools and your work surface. And it resists binding when the blade is used for large-volume cutting applications, which reduces blade warp.

As a lubricating feature, Perma-SHIELD allows the blade to spin freely while reducing stress on the motor and carriage of your saw. In addition, this coating helps prevent debris collection and resin or "pitch" buildup. Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup is another little convenience that translates into longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.

This industrial saw blade is backed by Freud's limited lifetime warranty.

About Freud: A History of Innovative Manufacturing

An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.

By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.

What's in the Box

Freud LM74R010 Glue Line Rip Saw Blade with Perma-SHIELD--10-inch diameter, 5/8-inch arbor, 30-tooth design.

From the Manufacturer

This blades specially designed triple chip tooth produces extremely smooth , true surfaces for gluing and finish work. There is no need for sanding or jointing after the cut. The ideal working range is from 1/8" to 1" thick.This blade features Freud's Tico Hi-Density Carbide, Non-Stick Perma-Shield Coating, Laser cut anti-vibration slots, Anti-kickback design, and Tri-Metal brazing. This heavy duty glue line ripping blade is ideal for superior finishes in natural woods.

• 10" Blade Diameter, 30 Teeth, TCG Grind, 5/8" Arbor, .118" Kerf, 12° Hook Angle
• Premium TiCo HI-Density Carbide Ripping Blend for Maximum Performance
• Heavy-Duty Thick Kerf and Plate ensure a stable, flat blade for long cutting life
• Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish
• Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.

User questions & answers

Question:	Does the anti-rust coating make this blade unsuitable for a Sawstop table saw (the manual says you must avoid blades with coating on the blade tips
Answer:	The teeth of the blade are not coated, therefore it will hinder the Sawstop's safety feature. Thanks
Question:	i previously purchased a set of freud diabl0 reciprocating saw blade; does freud make saw handles for these blades
Answer:	Sorry we do not
Question:	Does this blade perform well on saws under 3hp
Answer:	I am using a Delta Professional table saw with a 1 1/2 HP 1 phase motor. This blade rips very accurately with very few if any saw marks living up to it glue joint claim. It easily cuts through 4/4 red oak with no noticeable load on the motor. You can really see and feel the difference when you rip with this blade as opposed to using a thin kerf rip blade (lots of saw marks) and a combination blade (more resistance and motor load). It didn't bother me at all to have to change between cross cutting and ripping blades at least 6 times this morning because I know how much better my cuts will be by using the right blade. When this blade can no longer be sharpened I will definitely buy another one.
Question:	I want one if these with a 1 inch bore. freud tools never reply to emails. any ideas how i can get what i want
Answer:	We can take your order and have the blade modified to a 1" arbor for a charge of $16.00.Thanks

Product description

Product Description

EZARC Reciprocating Saw Blade Bi-Metal Cobalt for Sawzall Saw Wood Metal Cable Pipe Plastic



Product Model: R1236DV

Total Length: 300mm/12-Inch

Cutting Length: 225mm

Blade Material: Bi-Metal with 8% Cobalt

Teeth Per Inch: 5+10TPI

Blade Thickness: 1.6mm

Cutting Material: Blades cut through heavy wood, wood with nails, chipboard, glass fiber reinforced plastics, composite material.

Universal 1/2"shank fits: Reciprocating saws including Dewalt, Bosch, Hitachi, Flex, Makita, Black+Decker, Milwaukee, Skil and more



Bi-Metal with 8% Cobalt

Bi-metal teeth are made of M42 with 8% cobalt and keep a long lifetime of hard metal working.



T2X Technology

Fast cutting speed with aggressive teeth angles and big teeth pitch.



Optimized Design

Thickest kerf of 1.6mm makes this blade more durable on any tough demolition jobs.

• 【Cobalt Teeth】 BI-Metal with 8% Cobalt teeth make our reciprocating saw blade extremely hard comparing with normal bi-metal blade, effectively longer lifetime for tough demolition works.
• 【T2X Technology】 Fast cutting speed with aggressive teeth angles and big teeth pitch.
• 【Cutting Capacity】 Blades cut through heavy wood, wood with nails, chipboard, glass fiber reinforced plastics, composite material.
• 【Optimized Design】 Thickest kerf of 1.6mm makes this blade more durable on any tough demolition jobs.
• 【Universal shank】 1/2 inch shank fits all Sawzall tools on the market including Bosch, Dewalt, Milwaukee Sawzall Saw, SKIL, Makita, Black & Decker, Ryobi, Porter Cable, Hitachi, Flex, Hilti, Metabo and more.

• No more fussing with blades stacked directly on top of one another. With the Fulton Saw Blade Storage Rack you can neatly and safely store up eight table saw or circular saw blades with no hassle. The Saw Blade Storage Rack will comfortably hold blades from 7-1/4" to 12" in diameter safely. With the rubber lined slots the rack will protect your saw blades from damage and make it easier handle the blades when needed.
• Neatly and safely store up eight table saw or circular saw blades with no hassle
• Saw Blade Storage Rack will comfortably hold blades from 7-1/4" to 12" in diameter safely
• With the rubber lined slots the rack will protect your saw blades from damage and make it easier handle the blades when needed.
• Designed to be mounted to your wall and is made from heavy gauge steel for excellent durability.

User questions & answers

Question:	Any reason this couldn't be mounted horizontally in a drawer
Answer:	As long as the drawer depth is at least 12"-13", there should not be a problem.
Question:	Do the saw blade teeth damage the rubber coating
Answer:	Never had any problem with damage to the rack or saw blades.
Question:	What country is this made in
Answer:	It's not stamped or marked with the country or part number.

Product features

Easily Locate Your Blades!

No more fussing with blades stacked directly on top of one another and having to remove multiple blades just to get to the one you need. Not to mention the clanging of the saw blade teeth. We all know this damages the blade and considerably reduces performance. In step the Fulton Saw Blade Storage Rack. With this saw blade rack you can neatly and safely store up eight table saw or circular saw blades with no hassles. The Saw Blade Storage Rack will comfortably hold blades from 7-1/4" to 12" in diameter safely and each blade can be easily seen and identified. With the rubber lined slots the rack will protect your saw blades from damage and make it easier handle the blades when needed. The rack fingers are positioned so that the blades are easy to identify and easy to choose which one is needed for the project. No more fuss means more time to work. The rack is designed to mounted to your wall and is made from heavy gauge steel for excellent durability.Saw blades are NOT included.

Get yours Today!

• No more fussing with blades stacked directly on top of one another. With the Fulton Saw Blade Storage Rack you can neatly and safely store up eight table saw or circular saw blades with no hassle. The Saw Blade Storage Rack will comfortably hold blades from 7-1/4" to 12" in diameter safely. With the rubber lined slots the rack will protect your saw blades from damage and make it easier handle the blades when needed.
• Neatly and safely store up eight table saw or circular saw blades with no hassle
• Saw Blade Storage Rack will comfortably hold blades from 7-1/4" to 12" in diameter safely
• With the rubber lined slots the rack will protect your saw blades from damage and make it easier handle the blades when needed.
• Designed to be mounted to your wall and is made from heavy gauge steel for excellent durability.
• Saw blades are NOT included

Product description

This LENOX Demolition 12-Piece Reciprocating Saw Blade Kit features T2 Technology to lengthen saw blade life and make cutting through heavy metal quick and easy. The tall blades have a durable construction that resists bending and provides maximum control in tough demolition applications. Each saw blade is configured with an aggressive tang angle and tapered blade share to facilitate cutting in tight areas.

• T2 Technology provides a long saw blade life
• Each saw blade cuts heavy metal quickly and easily
• Tall reciprocating blade is designed to resist bending
• Durable construction provides maximum control in tough demolition applications
• Each reciprocating saw blade features an aggressive tang angle and tapered blade share to allow cutting in tight areas

User questions & answers

Question:	Are these bimetal, or homogenous steel
Answer:	Bimetal , have used lenox blades whenever i can they cut better and last longer , use a little oil when cutting makes them last longer .....
Question:	Are all of the blades in this set bi-metal, or are some plain, cheap steel
Answer:	All of the blades in the set are Bi-Metal.
Question:	How many blades can you fit in the case? (More then the 12 it comes with
Answer:	12.
Question:	How long is the case
Answer:	10" case exterior; can handle a 9.75" blade interior...nice case

Product features

LENOX Tools Demolition Reciprocating Saw Blade Kit with Bonus Storage Case

Cut through nail-embedded wood, medium metal, and thick metal with the LENOX Tools Demolition Reciprocating Saw Blade Kit. This 12-blade demolition kit lets you choose from three tooth counts--6 TPI, 10 TPI, and 14 TPI--and two blade lengths--6 inch and 9 inch--and includes a convenient storage case. Reliable LENOX Tools Demolition recips feature robust bi-metal construction and taller, thicker profiles than traditional blades to prevent bending and provide maximum control. Power Blast Technology and T2 Technology deliver durability, long life, and versatility, so you can spend more time cutting and less money on blade replacements.

What's in the Box:

Power Blast Technology Strengthens the Blade

Designed with Power Blast Technology, each LENOX Tools Demolition Reciprocating Saw Blade features high-speed blasting along the cutting edge to strengthen the blade. The result is fewer breaks and greater durability.

T2 Technology Delivers Long Life and Faster Cutting

LENOX Tools Demolition Reciprocating Saw Blades feature T2 Technology optimized tooth geometry that minimizes friction and heat buildup to eliminate premature tooth dulling and blade failure. T2 Technology also reduces cutting forces on each tooth and optimizes chip removal to allow efficient cutting in the widest range of materials.

Bi-Metal Construction Provides Durability

Get dependable results with the durable bi-metal design of LENOX Tools reciprocating saw blades. Bi-metal construction combines high-speed steel tooth tips with a flexible alloy steel backing to create a blade strong enough to power through materials with less breakage.

Taller and Thicker Blade Prevents Bending and Provides Control

Each LENOX Tools Demolition Reciprocating Saw Blade has a profile that is taller and thicker than traditional recips. The robust design prevents bending during cutting and provides maximum control in the toughest demolition applications.

Product description

With a 6-degree hook angle for fast, aggressive cuts, DEWALT Wood Cutting Reciprocating Saw Blades feature a reinforced tooth for additional strength when cutting through nails and other foreign objects. Raker tooth design helps to increase contact area for fast cuts. A specially formulated anti-stick coating minimizes friction and gum-up.

From the Manufacturer

This DEWALT DW4803 9-inch 6-TPI taper-back bi-metal reciprocating saw blade features reinforced teeth for increased durability when cutting through nails and other foreign objects. Its +6-degree hook angle makes fast, aggressive cuts, and its anti-stick coating minimizes friction and gum-up. The raker tooth design increases the tooth contact area for faster cuts.

• Reciprocating saw blade has a reinforced tooth for increased durability when cutting through nails and other foreign objects
• +6 degree hook angle for fast, aggressive cuts
• Specially formulated anti-stick coating minimizes friction and gum-up for smoother cuts
• Raker tooth design increases the tooth contact area for faster cuts
• Reinforced tooth for increased durability when cutting through nails and other foreign objects
• +6-Degree hook angle for fast, aggressive cuts
• Specially formulated anti-stick coating minimizes friction and gum-up for smoother cuts

User questions & answers

Question:	I want to be sure that this is the dewalt dw4803b. your description describes it but the picture is not it. Also this price is for 100 blades correct
Answer:	Back when I bought thi blade,it was suppose to be for 100 blades also.However it was not.Better be sure befor you buy.I don"t know what the price is,but if it is really low,best to call the company and check.you could be getting set up to be hoodwinked.
Question:	How many blades are you actually selling for this price? I have ordered 100 blades in the past to only receive 25 and then be told "oops we made a
Answer:	SCI, I ordered these and received 2 packs of 5 blades. Total of 10.When i inquired about the 100 blade description, i was told they obviously couldn't give me that many blades for that price. They did however refund my money and let me keep the blades. That was nice.

Product features

DEWALT DW4803 9-Inch 6-TPI Taper-Back Bi-Metal Reciprocating Saw Blade (5-Pack)

The DEWALT DW4803 9-Inch 6-TPI taper-back bi-metal reciprocating saw blade features reinforced teeth for increased durability when cutting through nails and other foreign objects. Its +6-degree hook angle makes fast, aggressive cuts, and its anti-stick coating minimizes friction and gum-up. The raker tooth design increases the tooth contact area for faster cuts. Pack of 5.

Made in the USA

In a commitment to build America, DEWALT, a leading manufacturer of high-quality professional power tools, is proud to expand its product offerings made in the USA using global materials to include more than 600 different cordless power tools, hand tools and accessories. DEWALT began production of its American-built cordless power tools in its 75,000-square-foot Charlotte Manufacturing Operations facility in early October of 2013, using global materials. Those same tools built prior to the opening of the factory were manufactured internationally and imported.

DEWALT cannot guarantee the tool you receive to be made in the USA, some retailers may have items that were built prior to October 2013. Only tools manufactured after October 2013 are made in the USA with global materials.

Product description

Recap Bled 6" 8TPI

• Sold on

User questions & answers

Question:	How many teeth per inch
Answer:	No
Question:	Will it be able to cut through 3 inch square tube 1/4in wall
Answer:	Thank you for your question. Our treadmill is specially customized for American guests, so the voltage is in line with the American voltage requirements.
Question:	Will it cut through painted metal well or will paint gunk it up so that it won't cut
Answer:	I oiled it when I got it and oil it after 30 hours of use.
Question:	Can this cut 1/2 rebar at grade on a 6 x 6 tie and stay sharp with some dirt? The rebar is between ground and 1st course and spikes on the second
Answer:	Thanks for your question. The width of our treadmill is 22.44", and the width of your table legs is larger than 22.44".

Product description

Designed for cutting stainless steel, Evolution metal cutting blades use dry cut technology, cutting with very little heat and few burrs.

• Metal Cutting Circular Saw Blades
• For Cutting Stainless Steel
• 90 Tooth Carbide Tipped Blade - 14 in (1 in arbor)..,-Note: Designed for use with Evolution saws or other low RPM saws.
• 0.094 in kerf, 1600 RPM
• 1600 RPM
• 90 Carbide Teeth, .094-Inch Kerf
• 1-Inch Arbor Size
• Designed for use with Evolution saws or other low RPM saws.

User questions & answers

Question:	I've read reviews on repl. blades for my Dewalt DW872 multi cutter & I'm leaning toward purchasing this blade. Anyone have experience w the combo
Answer:	Has worked well for me I cut 3/8 × 4 with it and 2 inch by 1/4 tube and angle it better than more expensive blades even cut 4 chan.
Question:	Can these blades be used in my dewalt chop saw or evolution saw only
Answer:	This blade is designed to be used in saws that operate at 1600 or fewer rpm. It will operate well in Dewalt's low speed DW872 saw (https://www.amazon.com/DEWALT-DW872-14-Inch-Multi-Cutter-Saw/dp/B0000302QS/ref=sr_1_1?ie=UTF8&qid=1502914983&sr=8-1&keywords=dewalt+low+speed+14%22+saw), but not in the Dewalt abrasive D28710 saw (https://www.amazon.com/DEWALT-D28710-14-Inch-Abrasive-Chop/dp/B00551DJBQ/ref=sr_1_1?ie=UTF8&qid=1502915123&sr=8-1&keywords=dewalt+abrasive+14%22+saw).
Question:	What blade is suggested for hi carbon and tool steel
Answer:	I spoke directly with Evolution and they recommended starting with the mild steel blade and then move to the Stainless Steel blade if that is not working for you.
Question:	will it cut 1/4 thk mild steel angle
Answer:	We have used the 14" Evolution metal blade to cut up to 1/2" angle iron. Most of what we cut is 1/8" - 1/4", and we get at least 150 cuts per blade.

Product description

12 X 96 NON FERROUS/PLASTIC

For a high-impact blade that makes clean cuts in plastics and non-ferrous metals, look no further than the Freud D1296N Diablo 12-Inch Non-Ferrous Metals and Plastics Saw Blade. Thanks to its proprietary TCG (triple-chip grind) teeth, this is your go-to blade for slicing through plastic structures and non-ferrous metals such as copper pipes, aluminum extrusions, and brass plates.

Model # D1296N Diameter 12" Machine Use Miter & Slide Miter Saw Application Non-Ferrous Metals/Plastics Teeth 96 TCG (Triple-Chip Grind) Arbor 1" Kerf .091" Hook Angle -5°

Makes Clean, Razor-Sharp Cuts in Plastic and Non-Ferrous Metals

Achieving premium results when working with plastics and non-ferrous metals is all about clean, accurate cuts. The Freud D1296N makes this process easy, fast, and precise. Constructed for making flawless crosscuts, this blade's proprietary TCG (triple-chip grind) teeth leave a clean, burr-free finish.

Contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for jobs that call for slicing through plastic structures and non-ferrous metal pipes, extrusions, and plates. Appropriate application materials include copper, aluminum, brass, and plastic.

Produces Smooth, Quiet Cuts with Laser-Cut Kerf

The Freud D1296N's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.091-inch kerf between the blade's 96 TCG (triple-chip grind) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision

So you can count on it over the long term, the Freud D1296N is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter Saws

The Freud D1296N is a great addition to your workshop because it's designed with the versatility to fit a variety of miter saws, including sliding miter saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box

Freud D1296N Diablo 12-Inch Non-Ferrous Metals and Plastics Saw Blade.

From the Manufacturer

This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. A permanent Perma-SHIELD coating keeps this blade free from gumming and corrosion, and laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life. This blade is ideal for on-the-job cutting of nonferrous metal such as copper pipe, aluminum extrusions, brass plate, etc.

• The product is 12x96T Diablo Blade
• Easy to use
• The product is manufactured in Italy
• Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
• Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight, Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life, Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability, Laser cut arbor for accurate blade rotation reducing vibration and premature wear, Imported

User questions & answers

Question:	Want to use this blade to cut 2" thick brass, Will this worl
Answer:	This is listed as used on slide saws, though it has a +10 degree kerf. I use this on my slide saw and works fine. Not as good as a forrest chopmaster but a thinner kerf, which is supposed to be easier on your saw. This blade does leave some burn marks mitering hard woods.
Question:	Looking for an easy, fast, clean means of cutting aluminum window screen frames would this be the best option
Answer:	With the carbide inserts on each tooth, it will cut aluminum so plastic should be a snap.
Question:	Can these cut iron , steel , and stainless steel
Answer:	I would avoid this blade for anything other than wood. I recommend the LU84R011. It's a combination blade that I use on my table saw for a myriad of things and I get super smooth cuts from it without excessive heat and paint transfer.
Question:	I need to confirm this item is for non ferrous metal..the item pictured is not, it doen't match the description...please confirm. Thank you
Answer:	Hook Angle is a positive 5-Degrees. Freud designed the LU74R010 Industrial Thin Kerf Crosscut blade as a 80 tooth 10" fine crosscut blade that features 80 alternating top bevel teeth set at a 5 degree positive hook angle, which is a configuration that lends itself to very clean crosscuts in a variety of materials, and is condusive for use in a table saw, radial arm saw, compound miter saw, or sliding compound miter saw. The body uses a laser cut expansion slots for low noise and vibration, and has an "Permashield" non-stick coating said to reduce heat build up. The C4 carbide teeth large enough to withstand many resharpendings.

Product description

✔INCLUDES:



*10-PACK, 6-Inch, 14TPI Reciprocaitng Saw Blade For Metal Cutting.

* Works with all major reciprocating saw brands such as DeWalt, Makita, Ridgid, Milwaukee, Porter & Cable, Skil, Ryobi, Black & Decker, Bosch, Hitachi



✔SPECIFICATIONS



*Fast straight cut, ideal for thick sheet metal[3-8mm], solid pipes/profiles [dia. 10-100mm]

*Especially for plunge cuts,sharp tip makes it easy into any corner for cutting job

*Reciprocating saw blades have reinforced teeth for increased durability.

*The hook angle on the teeth creates an extremely aggressive, fast-cutting blade.

*Tooth design utilizes sharper tooth geometry for faster cut rates.

*Aggressive shank angle increases tooth contact, maintaining cutting speed as blade wears for longer blade life.

*Made of high quality Bi-Metal (stronger than HSS) composition reduces breakage and maximizes tooth durability.

*Specially formulated coating minimizes friction for smoother cuts.

• ★10-PACK, 6-Inch, 14TPI Reciprocating Saw Blade For Metal Cutting.
• ★Made of high quality Bi-Metal (stronger than HSS) composition for extra 50% longer lifetime
• ★Suitable blade height and flexible thin blade body is more resistant to breaking and shattering
• ★Fast straight cut, ideal for thick sheet metal[3-8mm], solid pipes/profiles [dia. 10-100mm]
• ★Works with all major reciprocating saw brands such as DeWalt, Makita, Ridgid, Milwaukee, Porter & Cable, Skil, Ryobi, Black & Decker, Bosch, Hitachi.

User questions & answers

Question:	will these blades cut cast iron
Answer:	3/4 " wide, working blade length 5 1/2"
Question:	Where are the janchi blades made
Answer:	13" x 7"