10 best pinless scroll saw blades

Product description

Olson's Precision Ground Teeth (PGT) scroll saw blades are the finest on the market - they outperform and outlast all other blades! Razor-sharp teeth cut faster, smoother and more accurately in both straight and radius cuts. Features: Olson PGT blades are 5" long with plain ends Made of the finest carbon steel for maximum strength, durability and long blade life Unique tooth geometry and widely spaced gullets minimize burning and give you rapid chip removal

• Sharpest, fastest cutting teeth
• Most accurate scroll saw blade ever made
• Double tooth for top performance in hardwoods
• Package Weight: 0.023 kilograms

User questions & answers

Question:	How long are these blades, will they fit a delta scroll saw
Answer:	8.5 x 3.5 x 1 in . Almost all blades fit almost all scroll saws.
Question:	Will these blades fit in an 18” porter cable scroll saw
Answer:	Some porter cable saws accept both plain and pin end blades. Without knowing the model # I cannot say for sure, but I am guessing it will.
Question:	Will these fit the Dewalt DW788 scroll saw
Answer:	These are 5" plain end blades so they will fit .
Question:	Are these pinned end blades
Answer:	No they are not pinned.
Question:	Does this saw come with a stand
Answer:	NO! Even though Delta and DeWalt are very similar, The DeWalt stand has to be adapted to fit the Delta saw. Takes a few minutes.
Question:	What is the 'thing' on left side? How easy to change blade, need a tool? Disappointed no light, any available
Answer:	That black tube thing on the left is an adjustable hose that blows puffs of air (generated I think from the up and down motion of the upper arm) which will help keep your lines clear of sawdust. Changing blades is a snap, simply loosen the thumb / wing screw on the top arm and the lower holder and slide out the blade. As for the light, I make due with a shop lamp that I have hanging from the ceiling of my garage. You can check woodcraft or rockler for magnetic portable lamps that may stick to the saw somewhere - not sure if its magnetic everywhere, never tried
Question:	The saw is great but I can not get the hold down to stay in place. I move the wood and it also moves. Any thoughts
Answer:	I removed mine even though it held just fine as I found that it got in my way. This was after I'd gotten used to the saw and the forces involved. I haven't had an issue using it without the hold down, but you have to do the holding down.
Question:	There's such a price difference, what's the main difference between this saw and the dewalt dw
Answer:	Only difference is some of the outside sheet metal, the inner workings are the same. You are paying for the Dewalt name. They both used to owned by the same company.

Product features

LOW VIBRATION, HEAVY DUTY CONSTRUCTION

The Dual parallel-link arm reduces vibration and noise. Keeping the blade perpendicular to the work surface Dramatically reducing over or under cutting, improving accuracy and cut quality. This low vibration scroll saw improves user sensitivity allowing you to make more precision cuts

LOW VIBRATION & BUILT TO LAST

The Dual parallel-link arm reduces vibration and noise. Keeping the blade perpendicular to the work surface Dramatically reducing over or under cutting, improving accuracy and cut quality. This low vibration scroll saw improves user sensitivity allowing you to make more precision cuts

LOADED WITH FEATURES

Electronic variable speed can be adjusted from 400-1,750 SPM providing you ultimate control. The upper arm lifts and locks in the raised position during blade changes or while adjusting the blade position for fret work. On/Off switch, electronic variable speed dial, flexible dust blower and blade-tensioning lever are all conveniently located up front on the arm for easy accessibility, while the tool-free blade tensioning allows for quickly adjusting the blade to the proper tension which maximizes blade life and accuracy

LOADED WITH FEATURES

Electronic variable speed can be adjusted from 400-1,750 SPM providing you ultimate control. The upper arm lifts and locks in the raised position during blade changes or while adjusting the blade position for fret work. · On/Off switch, electronic variable speed dial, flexible dust blower and blade-tensioning lever are all conveniently located up front on the arm for easy accessibility, while the tool-free blade tensioning allows for quickly adjusting the blade to the proper tension which maximizes blade life and accuracy

ENORMOUS CAPACITY

Huge 20 inch x 2-1/8 inch Capacity with a 24 inch x 16 inch table allow you to handle the large projects. A 3/4 inch stroke allows this saw to cut aggressively for those nice clean cuts.

HUGE CAPACITY

Huge 20 inch x 2-1/8 inch Capacity with a 24 inch x 16 inch table allow you to handle the large projects. A 3/4 inch stroke allows this saw to cut aggressively for those nice clean cuts.

AND MUCH MORE

Double tooth for top performance in hardwoods!

18-pack Assortment. Precision Ground Tooth PGT Scroll Saw Blades are the best blades available! Tested and endorsed by experts, PGT blades outperform and outlast all other blades. Their razor sharp teeth cut faster, smoother, and more accurately in both straight and radius cuts.

Unique tooth geometry

A unique tooth geometry and widely spaced gullets minimize burning. Made of the finest carbon steel for maximum strength, durability and longest blade life.

For scroll saws that take plain end blades

Reverse Tooth blades work best with 1-2 reverse teeth showing above the table on the upstroke! Adjust blade in holder or trim when necessary.

Product description

Remember when you could make intricate and artful cuts? Let the good times scroll with a pack of WEN Scroll Saw Blades. This set includes one dozen 5-inch scroll saw blades. Our skip-tooth design perfectly handles hardwood and soft metals. The #5 style blade measures in at .0142 inches in thickness with a .0402 inch width and 16.9 TPI. Our universal 5-inch length is compatible with the majority of scroll saws on the market, including the entire line of WEN Scroll Saws.

• Includes one dozen premium pinless scroll saw blades
• Skip-tooth design perfectly handles hardwood and soft metals
• #5 style blade measures in at .0142 inches in thickness with a .0402 inch width
• Features 16.9 teeth per inch
• 5-inch length compatible with the majority of scroll saws on the market, including all WEN Scroll Saws

Product description

Remember when you could make intricate and artful cuts? Let the good times scroll with a pack of WEN Scroll Saw Blades. This set includes one dozen 5-inch scroll saw blades. Our reverse skip-tooth design perfectly handles hardwood and soft metals with a smoother finish. The #5R style blade measures in at .0142 inches in thickness with a .0402 inch width and 16.9 TPI. Our universal 5-inch length is compatible with the majority of scroll saws on the market, including the entire line of WEN Scroll Saws.

• Includes one dozen premium pinless scroll saw blades
• Reverse skip-tooth design perfectly handles hardwood and soft metals with a smoother finish
• #5R style blade measures in at .0142 inches in thickness with a .0402 inch width
• Features 16.9 teeth per inch for a smooth, splinter-free finish
• 5-inch length compatible with the majority of scroll saws on the market, including all WEN Scroll Saws

Product description

Remember when you could make intricate and artful cuts? Let the good times scroll with a pack of WEN Scroll Saw Blades. This set includes one dozen 5-inch scroll saw blades. Our modified geometry design allows for fast and accurate cuts with minimal burning. The #5R style blade measures in at .0142 inches in thickness with a .0402 inch width and 11.3 TPI. Our universal 5-inch length is compatible with the majority of scroll saws on the market, including the entire line of WEN Scroll Saws.

• Includes one dozen premium pinless scroll saw blades
• Modified geometry design allows for fast and accurate cuts with minimal burning
• #5R style blade measures in at .0142 inches in thickness with a .0402 inch width
• Features 11.3 teeth per inch for a smooth, splinter-free finish
• 5-inch length compatible with the majority of scroll saws on the market, including all WEN Scroll Saws

Product description

Modified Geometry Teeth (MGT) probably the best blade on the market. The specific tooth design makes this blade EXTREMELY EFFICIENT; tolerates aggressive feed rates, avoids overheating, leaves a smooth finish, no splinters.

• 2/0 - 0087" x .0236" x 15.4TPI - #1 - .0102" x .030" x 13.7TPI -
• #3 - .0126 x .0335 x 12.4TPI - #5 - .0142" x .0402" x 11.3TPI -
• #7 - .0157" x .0488" x 10.4TPI - #9 - .0173" x .0512" x 9.6TPI -
• #12 - .0197" x .061" x 8.6TPI

User questions & answers

Question:	Are blades pinned
Answer:	All Flying Dutchman blades have plain ends (no pins) and are 5 inches long.
Question:	Do they make scroll saw blades that are 6 inch long plain end
Answer:	There are 6" scroll saw blades available, however Flying Dutchman does not carry any, sorry.
Question:	How many pieces included on this package
Answer:	Includes one dozen of each of five different styles of blades (UR5, SR5, PS5, P5, and NS3) for a total of 60 individual blades.
Question:	are these flat end
Answer:	They are all pinless. The New Spiral blades are not flat end, though. They spiral all the way to the end. They are still pinless though.

Product description

Modified Geometry Teeth (MGT) probably the best blade on the market. The specific tooth design makes this blade EXTREMELY EFFICIENT; tolerates aggressive feed rates, avoids overheating, leaves a smooth finish, no splinters.

• 2/0 - 0087" x .0236" x 15.4TPI - #1 - .0102" x .030" x 13.7TPI -
• #3 - .0126 x .0335 x 12.4TPI - #5 - .0142" x .0402" x 11.3TPI -
• #7 - .0157" x .0488" x 10.4TPI - #9 - .0173" x .0512" x 9.6TPI -
• #12 - .0197" x .061" x 8.6TPI

Product description

These Blades come separated in the package and labeled so you know which blades are which. Manufactured in Switzerland with high-quality steel, these blades are cut to precise tolerances and it shows in the performance of the product. For added strength, the Reverse-Tooth blade design guarantees you less sanding time. All these blades are 5 inches long and Pinless. Most Scroll Saw blades only cut on the down stroke, which causes tear out on the backside of your project, but Reverse-Tooth blades cut on the upstroke as well. . .giving each stroke a pass on both the front and backside of your material -- for a smoother cut all around. Top-grade high-speed fretsaw, hardened with reverse teeth. Splinter-free finish on top and bottom surfaces. Reverse Tooth INTRO - PACK Four Dozen Blades 1 dozen of four different sizes 3, 5, 7 & 9! If you are a beginner and don't know where to start we recommend the quick and easy Intro Pack of blades.

• One Dozen of Four Different Sizes #3, #5, #7 & #9 (48 Blades)
• These blades are an all around versatile application blades. The same geometry as skip
• tooth blades, with the addition of reverse teeth. The reverse teeth help to prevent splinters
• from developing on the underside of the wood.
• All these blades are 5 inches long and Pinless.

Product description

12 of each blade, 36 piece assortment. 5″ long, plain end Skip Tooth Scroll Saw blades are used for hand and machine

sawing on: wood, plastic, bone, hard rubber, wood veneer, other fibrous materials, or copper, bronze, brass, and other non-ferrous metals, sandwiched between waste board. Excellent for fast cuts that provide smooth finishes and good chip clearance.

• Available in more sizes than any other type of Olson scroll saw blade
• For hand or machine sawing of wood, plastic and fibrous materials
• Skip tooth blades cut fast, provide good chip clearance.
• Package dimension : 1.875"W x 7.75" H x 1.0" D

User questions & answers

Question:	will these work on my central machinery
Answer:	If your scroll saw uses a blade that has pins (ears) on the ends, it won't work. Olson does carry pinned blades.
Question:	Do these fit the wen scroll saw
Answer:	I have a wen, and they fit!
Question:	will this fit deWalt
Answer:	Any plain end 5" blade will fit the deWalt 788 machine..
Question:	Are these pin end or pin less
Answer:	The ends are NOT pinned; these blades are pinless.

Product features

Skip Tooth Blades Scroll Saw Blades can cut many materials

Skip tooth blades cut fast, provide good

chip clearance, and smooth finishes.

Great for tight radius fretwork!

For Cutting Metal

Traditional Skip Tooth Scroll Saw Blades seem to out perform the traditional “metal cutting” or

“jeweler’s piercing” scroll saw blades in cutting metal. Any Skip Tooth blade up through a

Universal No. 5 is good, but Universal Nos. 3/0 to 2 are preferred for inside cuts and cutting

marquetry panels.

These blade sizes can be used for cutting cold rolled steel, copper, brass, aluminum sheet and

bronze. Generally, a piece of soft metal up to 1/8″ thick can be cut quite easily, whether a single

sheet of stock or several thinner sheets in a stack cut.

Product description

Modified Geometry Teeth (MGT) probably the best blade on the market. The specific tooth design makes this blade EXTREMELY EFFICIENT; tolerates aggressive feed rates, avoids overheating, leaves a smooth finish, no splinters.

• 2/0 - 0087" x .0236" x 15.4TPI - #1 - .0102" x .030" x 13.7TPI -
• #3 - .0126 x .0335 x 12.4TPI - #5 - .0142" x .0402" x 11.3TPI -
• #7 - .0157" x .0488" x 10.4TPI - #9 - .0173" x .0512" x 9.6TPI -
• #12 - .0197" x .061" x 8.6TPI

User questions & answers

Question:	What is the tip-to-tip length of the blades? My scroll saw will take both pinned and non-pinned but the "pinned" blades are 5-3/8" total length
Answer:	All the Flying Dutchman blades are 5" plain end blades. I measured a sample of Scroll Reverse and it was just over 5" at 5 1/8".
Question:	Will these work on delta
Answer:	If your saw uses 5" plain end blades then yes these should work for you. You may need to check your user manual if you are unsure of the type of blades you need for your saw. Please let us know if you have further questions.

Product description

SKIL scroll blades are designed for the professional craftsman who needs sharp, long lasting blades. These blades are precision sharpened for easy cutting of fine, intricate shapes. Offered in a variety of TPI and widths, these blades are recommended for cutting most woods, plastics and non ferrous metals. SKIL carries both pinned and plain style to meet the user's needs in whatever type of scroll saw they might have.

• Includes: (12) with 28 teeth per inch, (12) with 11.5 teeth per inch, (12) 9.5 teeth per inch
• Pack Quantity: 36
• Made from premium grade steel for longer life
• Precision sharpened for easy cutting of intricate shapes
• Recommended for sawing of all woods, plastics and non-ferrous metals, Fits most major brand scroll saws

User questions & answers

Question:	Can I cut 26 - 18 gauge copper sheet using the finest blade (28 teeth/inch
Answer:	I'm sure you could. I wouldn't want to try to a lot of it, but small batches should be fine. I expect the worst that would happen would be copper build up in the teeth.
Question:	Will these blades work on a 15" value craft scroll saw
Answer:	The short answer is Yes, the size of stroke is what is important. The 15" is the throat size or how big the material is. The blades should be 5 inches.
Question:	will it work on the skil
Answer:	No, it will not.This blade is for scroll saw. No for Orbital Cut Jig Saw. Skil 4390 is a Cut Jig Saw, is't it ?
Question:	What Number size are these??? #2 #5 etc
Answer:	The 80182 blades do not have a number rating. It will include (12) 28 teeth per inch, (12) with 11.5 teeth per inch, (12) 9.5 teeth per inch plain ended scroll saw blades. If you have further questions, please feel free to contact us at 1-877-SKIL-999 (1-877-754-5999). We're here to help!