11 best wet saw for glass

Product description

SKIL 3540-02 7" Wet Tile Saw complete tiling projects easily with the model 3540, 7 in. Wet Tile Saw. The stainless steel top resists corrosion and the adjustable rip fence with miter gauge ensures accurate straight and miter cuts. Skil 3540-02 7" Wet Tile Saw features: Stainless steel table top is resistant to corrosion adjustable rip fence with miter gauge for accurate straight and miter cuts 0-45 degree level for a wide range of cuts blade cooling water reservoir to keep blade cool and minimize dust and debris 7" diamond blade for fast and smooth cutting SKIL 3540-02 7" Wet Tile Saw specifications: Amperage: 4.2 Arbor Size: 5/8" Bevel angle range: 0-45 degrees Bevel Stops: 0 Degrees, 45 Degrees Blade Diameter: 7" Depth of Cut at 45 Deg. : 1" Depth of Cut at 90 Deg. : 1-3/8" Length: 14" Name: 3540 (S12) No load RPM: 3600 Voltage: 120V AC only weight (lbs. ): 18 Width: 13.25."

From the Manufacturer

Skil benchtop power tools are quality tools at a great price!

• Corrosive resistant stainless steel top supports tiles up to 12 x 12-inch
• Adjustable rip fence with miter gauge for accurate straight and miter cuts
• Blade cooling water reservoir to keep blade cool while minimizing dust and debris
• Bevel cuts tile from 0 to 45 degrees. Cut material: Stone/Masonry
• Cross cut capacity: 7.75-inch; Diagonal cut capacity: 7.25-inch

User questions & answers

Question:	this saw comes w/a diamond blade. would it be good enough to cut little glass mosaic tiles or should I order a different diamond blade
Answer:	The blade will cut through the glass tiles just fine, however, I would suggest purchasing a thinner more durable blade. I purchased a Ridgid 7" blade from Home Depot. The Ridgid blade make cleaner cuts and wastes less material because it is a thinner blade.Also, Skil just came out with a new updated model of this saw. I would suggest purchasing that saw instead because it has some much needed improvements. Here is some information on the new saw: https://www.skiltools.com/Tools/Pages/ProductDetail.aspx?model=3550-01.
Question:	What is the biggest size of tile this saw can be used for to do diagonal cuts
Answer:	am sure you can cut even 24x24 in. tile. to cut straight get 1x1x 20--24 in, wood and clamp under the table as your guide to cut straight,hope this will help. skil power tools are great and cheaper than MK
Question:	Would this be a good saw to cut rocks in half
Answer:	Depends on the size of the rock. The material is not an issue -- I use it to cut agates and quartz up to a couple inches in size. The important thing is to go slow and make sure to keep the cut wet.
Question:	Will this saw cut peanut brittle? We are currently struggling with the batch we just made and we need to find a good way to cut it
Answer:	i'M SORRY, BUT NO THIS WILL NOT CUT THE BRITTLE. this saw was designed for tile, brick and old tootsie rolls only. the reason tht is, the hamsters in the the motor are allergic to peanuts and a few other foods. seeing as how we all love fluffy hamsters, they gave them work instead of turning them away( that and hamsters have a ton of kids!!). the saw you are looking for has gophers in the drive motor( 2 x's the power for those thick piece's of brittle), that have been thoroughly screened for any deadly allergies to tree nuts and dairy, not to mention sock puppets and shoe polish as well. i do suggest that if you are going to buy the gopher powered brittle slicer 3000xlr made by Skill'dG( skilled gophers), to make sure you are getting the real thing, and not a cheap australian clone. contact the gopher union work force development office and they will give you a list of all non gopher supported and wallaby knock offs and a wallet sized card for easy recognition of their branded products. They may ask for a donation, but it's well worth the $120 to join their non members club. You get free holes in your green, and much, much more. Good luck on your quest, and may the spork be with you.

Product features

Stainless Steel Table Top

A stainless steel top will resist corrosion after multiple uses.

Adjustable Rip Fence with Miter Gauge

The adjustable rip fence with miter gauge will allow you to make accurate and straight miter cuts.

Bevel Cuts Tile

For more intricate designs or to tackle those end pieces, the 0-45 degree bevel will provide flexibility for various cut types.

Blade Cooling Water Reservoir

The constant flow of water keeps blade for overheating and helps minimize dust and debris while cutting tile.

More About This Product

• Amperage: 4.2
• Rating: 120V AC Only
• No Load RPM: 3,600
• Blade Diameter: 7 In.
• Miter Angle: 0-45 Degrees
• Bevel Positive Stop at: 0, 45 Degrees

Product description

Inland Craft's DB-100 band saw is the perfect workbench tool for cutting free-form cabochons, different shapes, organic curves, inside curves, stained glass pieces, mosaics, and more. It's also a great tool for coral fragging. This DB-100 includes a diamond band saw blade designed to wet saw glass, stone, semiprecious gems, tile, ceramic, porcelain, marble, granite, silicon, plastics, fiberglass, fiberboard, leather, shells, and live coral. The saw body has a small footprint and is manufactured with rustproof, lightweight, structural-grade thermoplastic, making this band saw machine very portable and easy to travel with. Its 1/6th hp, 115v permanent magnet DC motor is variable speed, delivering speeds from 800rpm to 3,400rpm. The gravity-feed, coolant system delivers clean water to the band saw blade, keeping your blade properly lubricated while you saw. Integrated internal drain channels and drain tubes collect and funnel excess, dirty water away from the blade to prevent it from re-circulating throughout the saw. Its corrosion-resistant work surface measures a generous 9" X 12". This DB-100 band saw includes: 37.7" (96cm) stainless steel diamond band saw blade, complete instructions, and one-year manufacturer warranty. All of our Inland band saw machines are brand new, shipped, and manufactured in the U.S.A. We ensure the authenticity of this product by us, the manufacturer. IMPORTANT PURCHASING NOTES: Maximum cutting material thickness is 3" for rocks/minerals, 1" for solid glass slabs, and 3" diameter for glass bottles. Band saw machines are optimized for cutting shapes and curves, so there is a large amount of "travel" in the band saw blade, which is necessary for cutting these shapes and curves. It is not designed to be used for cutting thick slabs of rough. If you are looking to cut thick slabs of rocks and minerals, we suggest a fixed-blade saw machine such as the Hi-Tech Diamond 6" Trim saw or Hi-Tech Diamond 10" Slab saw than this band saw machine.

• Cut free-form cabochons, different shapes, organic curves, inside curves, stained glass pieces, mosaics, and more. It's also a great tool for coral fragging.
• Includes stainless steel diamond band saw blade designed to cut glass, stone, tile, ceramic, shells, and live coral.
• Powerful 1/6th hp, 115v permanent magnet DC motor with variable speed, delivering speeds from 800rpm to 3,400rpm. Work at the speed you desire.
• Coolant system provides a continuous, regulated flow of clean water to the band saw blade, keeping your blade properly lubricated while you saw.
• Features power, durability and precision with a small footprint. Comes backed with a one-year warranty.

User questions & answers

Question:	is it good for fragging corals? i have been suggested this as a good option. Also what would be the shipping to Mumbai India
Answer:	Thank you for your question. It comes with a reservoir that mounts behind the upper wheel. Water flow is controlled by a valve at the end of the adjustable drip guide.
Question:	How does the clean water get delivered to saw? Bottle, tap, or does it have a resevor
Answer:	Yes, this product can cut through wine bottles.
Question:	Can this cut through wine bottles
Answer:	No, this machine does not accept a mitre gauge.
Question:	looks like the table has a mitre slot .. does it come with a mitre guage
Answer:	This vr set has a professional manual, you should be patient to read it, if there are still problems, just to contact the seller, the seller is very friendly

Product description

The Amazing Tile And Glass Cutter Is A Hand Tile Cutter That Allows You To Cut Shapes In Ceramic Tiles, Glass, Mirror, And Floor Tiles. The Extreme Hardness And Optimized Angle Ground Into The Cutting Wheel Allow The Tool To Cut Wall Tile, Floor Tile, Glass Tile, Most Porcelains, Quarry Tile Up To 3/4" Thick Glass, Plate Glass, Stained Glass, Picture Framing Glass, Fused Glass, Textured Glass. And Even Mirror Glass . Cutting Thin Glass Can Be Done By Folding The Breaker Forward Making The Gap Smaller So Glass Sheets For Crafts Can Be Cut From 1/16" To 3/8" Thick. Really Thick Glass Can Be Cut Using Techniques Included In The Detailed Instructions. Apply A Drop Of Light Machine Oil To The Scoring Cutter When Cutting Ceramic Flooring Tiles Or Glass Cutting Oil . With A Regular Glass Cutting Tool There Can Be A Difficulty When It Comes To Breaking Of The Glass But This Tool Has The Glass Running Pliers like Rozen Pliers Built In. This TOOL is Not Tile Nippers it scores the tiles. This hand tool set is a great addition to your Household Tool Kit. Cutting large ceramic tile without the wet tile cutting saw.

• EASY TO USE TOOLS FOR CUTTING TILE: Thorough printed Instructions for the girls, pictures and videos for the boys, how to cut Ceramic Tile, How to cut Glass Mosaic Backsplash, How to Cut Porcelain Tile, How to Cut Radius ,How to cut Straight lines, wiggly lines and how to clean up afterwards.
• NO WET SAW RENTAL NO MESSY TILE SAW CUTTER : Even Professional Tilers don't like the mess a wet saw makes and that even the best diamond blades can chip the edges of the tiles, and forget about cutting glass mosaic backsplash tiles on a mesh with a water saw, they chip, scrunch up, fly away, and when they get wet they fall off anyway. So you end up pushing each tiny tile through the wet saw with what’s left of your fingers.
• NO RUNNING IN AND OUT THE HOUSE From the Basement or The Driveway, Trailing Through The House Up and Down The Stairs in the Freezing Rain or Burning Sun a Thousand Times with Every Single Tile For Every Single Cut, You Can't use a Wet Saw in The House - She Won't Let You ! She’s Right It's Way Too Messy! And If you do, you’ll be in Marriage Guidance, and still be finding bits 20 years from now
• HOW TO CUT GLASS MIRROR STAINED GLASS SHEETS: With Hints Tips and Trade Secrets. Do you know anybody that didn’t break the last piece of Glass they tried to Cut? That's because 99% of the Wheels are junk Reconstituted Tungsten Carbide , they Wobble across the Glass you can’t see a line because there isn’t one, then you Tap it with that Ball Thing on the End, Tap Tap Tap, cross your fingers close your eyes and hope for the best, then pick another bunch of broken pieces off the floor.
• UNCONDITIONAL LIFETIME GUARANTEE MADE IN SCOTLAND GREAT BRITAN : Stamped on the side not printed on a removeable sticker. Lets face it If you were Bungee Jumping what would you want stamped on the side Made in Great Britain or Made in, Well Some Other Place

User questions & answers

Question:	Can this be used to cut around an outlet in two directions (vertical + horizontal cut) for a 3x6 ceramic subway tile
Answer:	No, it doesn't come with blade cover.
Question:	buenas noches, sirve para cortar ceramica en formatos grandes
Answer:	Yes, but it is a decent knife
Question:	Anyone use this on large format tile
Answer:	Yes, the Vollrath 47713 3/8" Potato Cutter can cut turnips.
Question:	Can this be used to cut luxury vinyl tile
Answer:	The 3/8" replacement pusher block (Vollrath 45749) may be found on Amazon with ASIN: B00NXWK7UU.

• Hydro lock water containment system keeps water contained near the blade and reduce clean-up time
• Sliding side extension provides support for tiles up to 18 x 18-inch
• Aluminum table top is a durable, rust-resistant surface
• Adjustable rip fence with miter gauge for accurate straight and miter cuts
• Designed for use with a wet tile saw
• For wet cutting at speeds up to 8,730 RPM
• 5/8 in. arbor fits most brands of wet tile saws
• Steel blade

Product description

Whether you're updating or renovating, adding tile to your kitchen or bathroom is now easier than ever with the SKIL 7-inch Wet Tile Saw (3550). The saw's innovative HydroLock System keeps water splash to a minimum so tiles can be cut in the room where they're being installed. You no longer need to go back and forth to a saw set up in the garage or outside to cut the tiles, so the SKIL tile saw with HydroLock System helps you finish the project faster too The 3550 works with a 7-inch continuous rim diamond blade, which provides efficient and even cutting. It also comes equipped with a durable rust-resistant aluminum table top and a sliding side extension that can be used to support tiles up to 18 x 18-inch.

• Hydro lock water containment system keeps water contained near the blade and reduce clean-up time
• Sliding side extension provides support for tiles up to 18 x 18-inch
• Aluminum table top is a durable, rust-resistant surface
• Adjustable rip fence with miter gauge for accurate straight and miter cuts
• Bevel cuts tile at 0, 22.5 and 45 degrees, giving flexibility for different cut types

User questions & answers

Question:	will this saw, with the standard blade that comes with it, cut glass bottles
Answer:	I don't know for sure. I did cut quite a lot of glass tile. I had to a different blade for glass. it did an exceptional job. In fact i used it to install 2500 sqft of tile in my house. It still has good life left in it.
Question:	Need to slice 1/8"-1/2" glass rods coe 104 & 32. Slice cylinder= thickness of rod & length of 4mm. cut should be clean but not pristine. Will thiswork
Answer:	Thank you for your question. The Skil 3550 is not designed for cutting glass, it is designed for cutting tile. If you have further questions please feel free to contact our Skil Customer Service Representatives at 1-877-754-5999
Question:	Does this include a blade? The info @ Amazon says bare tool, yet the Skil website says yes
Answer:	Yes, the blade is included. The tile saw includes the 7 in. Diamond Blade, Side Extension, Rip Fence, Miter Gauge, Blade Guard and Blade Wrench.
Question:	Why is this model so much more expensive than the model is replaced? The 3540-02 was half this price, so what is the difference
Answer:	Thank you for your question. The Skil 3550 can cut tiles up to 18x18 inches, has an aluminum table top and also our Patent Pending HydroLock System which is an innovated upper and lower guard design that keeps water contained near the blade. The Skil 3540 cuts tile up to 12x12 inches, has a stainless steel table top and does not have the HydroLock System. If you have further questions please feel free to contact our Skil Customer Service Representatives at 1-877-SKIL-999 (1-877-754-5999).

Product features

SKIL 3550-02 7-Inch Wet Tile Saw with HydroLock Water Containment System

Whether you're updating or renovating, adding tile to your kitchen or bathroom is now easier than ever with the SKIL 7-inch Wet Tile Saw (3550). The saw's innovative HydroLock System keeps water splash to a minimum so tiles can be cut in the room where they're being installed. You no longer need to go back and forth to a saw set up in the garage or outside to cut the tiles, so the SKIL tile saw with HydroLock System helps you finish the project faster too! The 3550 works with a 7-inch continuous rim diamond blade, which provides efficient and even cutting. It also comes equipped with a durable rust-resistant aluminum table top and a sliding side extension that can be used to support tiles up to 18 x 18-inch.

Product description

This is your dream saw. Weighing 11 pounds, the PRECISION 2000 is ideal for the weekend warrior, hobbyist, crafter and Do It For Me (DIFM) types, who are tasked with cutting wood, glass, ceramic tile, metal, plexiglass, and other materials. Additionally, the bandsaw's small footprint offers increased flexibility for cutting material on a countertop, desk top or any other tight spaces. The PRECISION 2000 is the ultimate of hobby saws combining quality, affordability and a THREE Year Warranty. This saw is not only easy to use, but is one of the most versatile Hobby Band Saws ever made.

• Quiet 1/8hp motor, doesn’t come with water tray, water pump or multispeed rheostat.
• Frame and interior support walls are rust-free aluminum
• Blade guide arm adjusts easily for varying material thickness
• Comes with One Studio Pro Wood blade for dry cuts and One Diamond Blade for wet cuts
• Cuts intricate details and multiple pieces.

User questions & answers

Question:	Can this unit be used on different hardness of stones for lapidary work
Answer:	I ordered in February and received 3 bottles. I just ordered may 9 and only received 1 bottle.....
Question:	Will it able to cut wine bottle
Answer:	Pink Peach is more of a matte color, not frosted like the Sweet Pea.
Question:	I bought a precision 2000 approximately 3 months ago from d&l glass in denver, co. it has been used about 2 hours and the motor is broke. help
Answer:	Yes! Should be here next week! (week of Dec. 3)
Question:	what size is the band saw blade
Answer:	Hi! Cherry Plum is a medium pink with a shimmer. The lightest pink with a shimmer is the Sweet Pea color.

Product description

PORTER-CABLE PCE980 7 in. Table Top Wet Tile Saw features a powerful 1.0 Horsepower motor providing smooth cutting of porcelain, ceramic and Stone tiles. Cast-metal cutting cart delivers 17 in. Cutting capacity, allowing cutting of 12 in. X 12 in. Tile on a Diagonal. Get accuracy of 1/16 in. On cuts up to 12 in. Long. The Pce980 includes Pce980 7 in. Wet tile saw, 7 in. Porcelain tile blade, Miter square, blade wrench. Includes 3 year limited warranty, 1 year free service contract, and 90 day money back guarantee.

• Onboard miter square to help line up miter cuts and repeatable rip cuts
• Roll cage for easy carrying and protection of the cutting cart
• Splash guard keeps water from spraying the tool operator
• Stainless steel fixed deck holds up to water and jobsite abuse
• Equipped with drain plug to quickly drain water over a bucket without a mess.RPM:2850 rpm

User questions & answers

Question:	how thick will this cut
Answer:	I would say 1:4, if you are cutting porcelain that thick take it slow, natural stone will cut easier. I highly recommend this saw, I use it for small jobs, it’s really great in tight spaces. In my opinion it’s the better of the smaller wet saws as I prefer a rolling table for more accurate cuts. I however use an MK on my bigger jobs and large format tile and stone and it’s a beast with no limitations but cost about 10x what this saw cost. I do a lot of baths and kitchens and I love it!
Question:	Alway problems substituting other brand blades - and can't find PC replacement blades - can anyone confirm good to excellent substitute
Answer:	I've tried several after market blades with this saw. The problem I've experienced is the original PC blade produces a slightly wider cut, allowing the tile to get past the guard support in the back. The blades I've tried produce a thinner cut that prevent the tile from passing around the guard support. I'll try the Pearl P4 7 inch to see if it works, although 50$ is a gamble I'd rather not bet on.
Question:	Can this saw cut glass tiles
Answer:	It can cut glass but without buying a blade specifically for glass tiles you might be disappointed. Every tile installer I know has several different blades always on hand for the abundance of materials thrown at him. Glass Master is a good glass blade and manual cutters often do excellent. With the stock blade you will get some chipping along the cut. Which could be polished out with extra effort. If you can handle chipping go for it.
Question:	Does this saw do miter cuts? Can you angle the blade, or the table
Answer:	Yes, this table saw does simple mitre cuts. The blade is fixed. The table is fixed (does not angle for a compound mitre cut). The product is positioned on the (right) cutting cart that feeds the tile to the blade. The saw comes with a miter square for basic angle cuts.

Product description

The Makita 12V max CXT Lithium-Ion Cordless 3-3/8” Tile/Glass Saw (CC02Z, tool only) delivers smooth and powerful cutting, with a compact design that’s engineered for ease-of-use and maneuverability. With the 12V max CXT Lithium-Ion slide-style batteries (sold separately), users get improved balance and ergonomics over pod-style batteries. For added convenience the batteries include an on-board L.E.D. charge level indicator.

• Makita-built motor delivers 1,600 RPM for faster and powerful cutting
• 3-3/8" blade delivers a maximum cutting depth of 1" for a wide range of cutting applications
• Compact and ergonomic design at only 12-3/8" long
• Weighs only 4.0 lbs. with battery (battery not included) for reduced operator fatigue
• Nickel-plated base prevents rust and tilts from 0° to 45° for bevel cuts

User questions & answers

Question:	Can I cut concrete with it
Answer:	I’m ambidextrous so when I need to use my left hand it still feels very comfortable.
Question:	will this accept the makita 3 3/8 wood cutting blades so I could use it multi purpose
Answer:	Hi, this is made up of high density memory foam and will help you relief your wrist pressure.
Question:	Can I used my 18 volts battery
Answer:	If you have a USB Port on the chromebook, it should have no problems.
Question:	Can this be used to remove old/damaged tiles from a wall/shower/niche to make repairs
Answer:	the bottom of mouse.

Product features

Makita CC02Z 12V max CXT Lithium-Ion Cordless 3-3/8" Tile/Glass Saw, Tool Only

The Makita 12V max CXT Lithium-Ion Cordless 3-3/8 inch Tile/Glass Saw (CC02Z, tool only) delivers smooth and powerful cutting, with a compact design that’s engineered for ease-of-use and maneuverability. With the 12V max CXT Lithium-Ion slide-style batteries (sold separately), users get improved balance and ergonomics over pod-style batteries. For added convenience the batteries include an on-board L.E.D. charge level indicator.

The CC02Z is compact and weighs only 4.0 pounds (with 12V max CXT 2.0Ah battery, sold separately). With 1,600 RPM, 1 inch cutting capacity, and a large 16.9 ounce. water supply tank for wet cutting applications, it is a compact and efficient cutting solution for tile and glass.

For longer run time, all 12V max CXT cordless tools are also compatible with the 12V max CXT Lithium-Ion 4.0Ah battery (BL1041B, sold separately). 12V max CXT lithium-Ion batteries are engineered with a Battery Protection Circuit that protects against overloading, over-discharging and over-heating. It’s part of the expanding 12V max CXT series, combining performance with superior ergonomics in a compact size.

Includes:

CC02Z - Cuts Glass

Smooth and Powerful Cutting.

It is a compact and efficient cutting solution for tile and glass.

Makita-built motor delivers 1,600 RPM for faster and powerful cutting.

CC02Z - Cuts Tile

Smooth and Powerful Cutting.

It is a compact and efficient cutting solution for tile and glass.

Makita-built motor delivers 1,600 RPM for faster and powerful cutting.

Warranty

Every Makita Lithium-Ion Power Tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita Lithium-Ion tool within 30 days of purchase, return it and Makita will provide, at Makita's option, a replacement or refund. Each Makita Lithium-Ion Power Tool, Battery and Charger is warranted to be free of defects from workmanship and materials for the period of Three Years from the date of original purchase. Should any trouble develop during the three-year period for the Lithium-Ion Power Tool, Battery and/or Charger, return the Complete Power Tool, Battery and/or Charger, freight prepaid, to one of Makita's Factory or Authorized Service Centers.

If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at our option, replace) without charge. This limited warranty does not apply to Makita Accessories.

This limited warranty does not apply where:

- Repairs have been made or attempted by others.

- Repairs are required because of normal wear and tear.

- The Power Tool, Battery or Charger has been abused, misused or improperly maintained.

- Alterations have been made to the Power Tool, Battery or Charger.

- The Power Tool or Charger has been used with a non-genuine or 'knockoff' battery.

Disclaimer:

In no event shall makita be liable for (a) any indirect, incidental, punitive or consequential damages arising from the sale or use of the products sold hereunder, or (b) any amount in excess of the amount actually paid to makita for the products sold here under for any liability arising from the sale or use of the products sold hereunder. This limitation applies both during and after the terms of the warranty. Makita disclaims liability for any implied warranties, including implied warranties of 'merchantability' and 'fitness for a specific purpose,' after the three-year term of this limited warranty.

This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.

Product description

The Makita 12V max CXT Lithium-Ion Cordless 3-3/8” Tile/Glass Saw Kit (CC02R1) delivers smooth and powerful cutting, with a compact design that’s engineered for ease-of-use and maneuverability. The kit includes two 12V max CXT Lithium-Ion slide-style batteries for improved balance and ergonomics over pod-style batteries. For added convenience the batteries include an on-board L.E.D. charge level indicator.

• Makita-built motor delivers 1,600 RPM for faster and powerful cutting
• 3-3/8" blade delivers a maximum cutting depth of 1" for a wide range of cutting applications
• Compact and ergonomic design at only 12-3/8" long
• Weighs only 4.0 lbs. with battery for reduced operator fatigue
• Nickel-plated base prevents rust and tilts from 0° to 45° for bevel cuts

User questions & answers

Question:	Can I use my 18V batteries? 5.0amp
Answer:	Yes
Question:	Can i use a 4" blade
Answer:	No you can not use a 4" blade
Question:	Can I cut plaster walls with metal net with it without producing too much dust
Answer:	This is meant for tile or glass with the blade provided , however one remove the bottle and changes the blade , then your able to cut dry wall with little dust, not certain theres a blade for metal
Question:	Is it worth the money to buy this if i already have an angle grinder with tile cutting blade
Answer:	You can get wat straighter cuts using this and a speed square then you would get with a bangles grinder

Product features

Makita CC02R1 12V max CXT Lithium-Ion Cordless 3-3/8 inch Tile/Glass Saw Kit

The Makita 12V max CXT Lithium-Ion Cordless 3-3/8 inch Tile/Glass Saw Kit (CC02R1) delivers smooth and powerful cutting, with a compact design that’s engineered for ease-of-use and maneuverability. The kit includes two 12V max CXT Lithium-Ion slide-style batteries for improved balance and ergonomics over pod-style batteries. For added convenience the batteries include an on-board L.E.D. charge level indicator.

The CC02R1 is compact and weighs only 4.0 pounds. (with 12V max CXT 2.0Ah battery). With 1,600 RPM, 1 inch cutting capacity, and a large 16.9 ounce water supply tank for wet cutting applications, it is a compact and efficient cutting solution for tile and glass.

For longer run time, all 12V max CXT cordless tools are also compatible with the 12V max CXT Lithium-Ion 4.0Ah battery (BL1041B, sold separately). 12V max CXT lithium-Ion batteries are engineered with a Battery Protection Circuit that protects against overloading, over-discharging and over-heating. It’s part of the expanding 12V max CXT series, combining performance with superior ergonomics in a compact size.

Includes:

CC02R1 - Cuts Glass

Smooth and Powerful Cutting.

It is a compact and efficient cutting solution for tile and glass.

Makita-built motor delivers 1,600 RPM for faster and powerful cutting.

CC02R1 - Cuts Tile

Smooth and Powerful Cutting.

It is a compact and efficient cutting solution for tile and glass.

Makita-built motor delivers 1,600 RPM for faster and powerful cutting.

Warranty

Every Makita Lithium-Ion Power Tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita Lithium-Ion tool within 30 days of purchase, return it and Makita will provide, at Makita's option, a replacement or refund. Each Makita Lithium-Ion Power Tool, Battery and Charger is warranted to be free of defects from workmanship and materials for the period of Three Years from the date of original purchase. Should any trouble develop during the three-year period for the Lithium-Ion Power Tool, Battery and/or Charger, return the Complete Power Tool, Battery and/or Charger, freight prepaid, to one of Makita's Factory or Authorized Service Centers.

If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at our option, replace) without charge. This limited warranty does not apply to Makita Accessories.

This limited warranty does not apply where:

- Repairs have been made or attempted by others.

- Repairs are required because of normal wear and tear.

- The Power Tool, Battery or Charger has been abused, misused or improperly maintained.

- Alterations have been made to the Power Tool, Battery or Charger.

- The Power Tool or Charger has been used with a non-genuine or 'knockoff' battery.

Disclaimer:

In no event shall makita be liable for (a) any indirect, incidental, punitive or consequential damages arising from the sale or use of the products sold hereunder, or (b) any amount in excess of the amount actually paid to makita for the products sold here under for any liability arising from the sale or use of the products sold hereunder. This limitation applies both during and after the terms of the warranty. Makita disclaims liability for any implied warranties, including implied warranties of 'merchantability' and 'fitness for a specific purpose,' after the three-year term of this limited warranty.

This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.

Product description

The Makita 4-3/8” Masonry Saw with 4” diamond blade (model 4100NHX1) is a powerful cutting solution that is ideal for a range of applications including stone, tile, and concrete. The 4-3/8” Masonry Saw is powered by a 12 AMP motor, with 13,000 RPM and a cutting capacity of 1-3/8”. Convenience features include a lock-off button, and a flat rear side motor housing that allows for easy blade changes. The saw weighs only 6.5 lbs. for improved operator comfort.



The 4100NHX1 also includes two Makita 4” Diamond Blades with turbo rim, engineered for constant contact with material for a smoother cut and finish.

From the Manufacturer

The Makita 4100NHX1 is a 4-3/8-Inch Masonry Saw with 4-Inch Diamond Blades. The Makita 4100NHX1 has Makita built motor which delivers 12 Amps for various cutting applications. The Makita saw has increased 1-3/8-Inch cutting capacity. The Makita Masonry Saw features more compact design at only 8-5/8-Inch long and weighs only 5.9 lbs. for less operator fatigue. The Makita 4100NHX1 has a lock-off button helps prevent accidental starts. Small and lightweight with plenty of power.

• Powerful 9.6 AMP motor for various cutting applications
• Cuts up to 1-3/8"
• Compact design at only 8-5/8" long and weighs only 6.5 lbs. for less operator fatigue
• High power-to-weight ratio with 13,000 RPM
• Powerful cutting in stone, masonry, tile and concrete

User questions & answers

Question:	I have the large dewalt d2400 tile saw but need something small for smaller cuts on tile. this saw look dry. will it work on time
Answer:	i will assume you mean, "will this saw work with tile?" yes. i bring this saw to all my tile jobs. it cuts without water, and is a must have when doing large tile, 12 x24 and greater. i use the saw for small cuts. outlets, corners, etc. it works well, and should be with every tile job. i would not suggest using it for every cut, you could but that is what the traditional wet saw is for. buy it. it's good to have.... don't be stupid... wear your safely glasses and hearing protection. when your old, feeding the birds is awesome! especially if you can see and hear them!!!
Question:	Can a diablo 5 inch fiber cement blade fit? originally the blades are for circular saws. but will a 5 inch circular saw fit this tool
Answer:	That blade is rated at a max of 12000 rpm's. This saw would put it right up to or above that. Probably better off using that blade on a wood cutting circular saw.
Question:	Can I use with water
Answer:	Yes, but with limits. I keep the tile wet with a spray bottle. Keeping itwet, but not submerged like a wet saw. Hope this helps. I've cut 1 1/4 inch thick granite using this method ....... It works really.
Question:	What is difference between this Makita 4100NHX1 and the Makita 4100NH
Answer:	From Makita's website it look like the 4100NHX1 is only 9.6 amps vs 12 amps for the 4100NH. Kinda makes sense as the 4100NH is a little more expensive.

Product description

A crisp, smooth and chip-free edge is important for tile cutting. Husqvarna diamond blades help users achieve the exact look needed. Use this blade to cut glass tile with the smoothest edge available.

• Continuous rim
• Total rim height is 275-inch
• Wet cutting only

User questions & answers

Question:	I think I'm sold on the blade. Any recommendations for the saw itself
Answer:	They have regular laces that are softer and flatter but lace like regular sneakers
Question:	I see a post from DaveShe about cutting bottles. What saw are you using and what is the largest diameter bottle you can cut? Thank you so much
Answer:	The earliest known origin of shoes are sagebrush bark sandals dating from approximately 7000 or 8000 BC, found in the Fort Rock Cave in the US state of Oregon in 1938. This particular running shoe from Nike is from Indonesia, a country located off the coast of mainland Southeast Asia in the Indian and Pacific oceans. It is an archipelago that lies across the Equator and spans a distance equivalent to one-eighth of Earth's circumference. It is in no way related to the People's Republic of China.
Question:	Where is this blade made
Answer:	This shoe was low quality and had hole in a little over a month.
Question:	How thick is the blade
Answer:	They tie