12 best brick blades

Product description

Quality materials for maximum productivity. Produced by following state-of-the-art processes, using high-tech machines and premium quality raw materials, these sabre saw blades have been specifically designed to ensure maximum lifetime and performance in all materials.

• Cut medium-sized brick up to a material thickness of 8-1/2-In, fiber cement, porous concrete.
• Cutting length 10-In, cutting depth 2-In, Kerf thickness 0.059-In, tooth distance 12.7mm
• Coarse straight cut.
• Made of carbide, universal shank.
• Accurate angle cut.

User questions & answers

Question:	Will this work on nails
Answer:	Well I have a very small car of subcompact a Chevy Sonic hatchback and I found plenty of places to mount it the hardest thing to figure out for me is how to tie into the horn wiring figure to be about the size of a cantaloupe if you can get a cantaloupe under your hood you're good to go
Question:	Will this work on wood
Answer:	Yes, the horn，fixing screws,relay，wiring harness ,filter ，are In the box. You can use your own button to install it。

Product description

Imperial Blades is dedicated to providing quality solutions for every oscillating multi-tool user. With tool fitment compatibility for every brand, our innovative blades power through the widest range of applications whether it’s on the jobsite or at home.

• 2-1/2" (64mm) DG
• Efficient boost design
• Features a one fit arbor
• Available pack sizes: 1Pc

User questions & answers

Question:	What is the width of this blade? I need something closer to 1/16 inch than 1/4 inch for shower tile grout removal
Answer:	It's about 1/8". I already bought one, so it's not a guess.
Question:	does this fit with bosch's starlock system
Answer:	No, this is not compatible with Starlock tool mounts.
Question:	Can I use this to cut a neat rectangluar 8"x10" hole through concrete block
Answer:	Not if the block is full of mortar. If the block is still hollow, it should work.
Question:	will this fit on the rockwell tool
Answer:	Hello Stacy, Yes, this tool will fit the Rockwell oscillating multitool. Sincerely, Customer Care Manager

Product description

Diamond masonry blade - high performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal. Thinner kerf to increase speed of cut while minimizing dust. Applications dry cutting Block, masonry Siding products and other masonry materials. Faster cut rate at a constant depth. Ideally used on thinner and softer masonry materials.

DeWalt's 4-1/2-Inch High Performance Masonry Diamond Blade provides long life and enhanced material removal. It has a thinner kerf to increase speed of cut while minimizing dust, and achieves 30 times longer life than bonded abrasives. This blade is best for cutting block, masonry siding products, and other masonry materials. It offers a faster cut rate at a constant depth, which is ideal for thinner and softer masonry materials.

From the Manufacturer

DeWalt DW4725 High Performance 4-1/2-Inch Dry Cutting Continuous Rim Diamond Saw Blade with 7/8-Inch Arbor for Masonry

• The product is 4-1/2" HiPerf MAS Blade
• Easy to use
• The product is manufactured in China
• High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal
• Thinner kerf to increase speed of cut while minimizing dust
• High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal
• Thinner kerf to increase speed of cut while minimizing dust

User questions & answers

Question:	Will this fit the cordless dewalt 4 1/2 dcg412? thanks
Answer:	It will fit any 4 1/2". Cord or no cord is irrelevant.
Question:	Will this grid carbide bits
Answer:	This a Diamond Saw Blade, its used to cut tile, brick, concrete, Masonry type work. Not intended for cutting metal. I cut tile and concrete with mine.
Question:	Will this fit a DeWalt model D28402W
Answer:	Yes, you can use this with the DW402 but you need to get the DW4706 Backing Flange. Amazon sells it for $2.99 as an add-on item. You need this flange for any type 1 cutting wheel used on a type 72 grinder (cupped surface disks). BTW, the arbor is 7/8" for disks that don't screw on, and 5/8" threads for those that do screw on. Hence you need cutting disks, like this one, with a 7/8" arbor. This applies for all grinders, not just Dewalt.
Question:	Will this blade cut cast iron pipe
Answer:	it will cut steel but it will wear it out very fast . i am a mason and cut rebar with these blades all the time . not sure about cast iron but softer steel they will cut although they are not intended to be used for that

Product features

Diamond Saw Blade

High Performance diamond matrix provides longer life and enhanced material removal with a thinner kerf to increase speed of cut while minimizing dust. Used in applications such as cutting block, masonry siding products, and other masonry materials.

• High Performance diamond matrix provides more life of conventional abrasives and enhanced material removal.
• Thinner kerf to increase speed of cut while minimizing dust.

Product description

DEWALT DW4712 High performance 7-inch dry/wet cutting continuous rim diamond saw blade for block and brick

From the Manufacturer

DW4712 High Performance 7-Inch Dry/Wet Cutting Continuous Rim Diamond Saw Blade for Block and Brick

• The product is 7", high performance masonry blade
• Easy to use
• The product is manufactured in China
• High performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal
• Thinner kerf to increase speed of cut while minimizing dust
• High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal
• Thinner kerf to increase speed of cut while minimizing dust

User questions & answers

Question:	Will it fit a dewalt angle grinder tool, 7-inch, 13-amp (dw
Answer:	I'm not sure, It depends on the arbor size on your grinder. The package I have says 5/8 7/8. It has an insert you can remove for the 7/8 arbor. I run mine on a 7.25 skill saw. Works well, it might be a handful on an angle grinder. Good luck
Question:	Does it work on wood
Answer:	DW4712 is ideal for cutting block, masonry siding products, and other masonry materials.
Question:	would this fit on a circular saw. I usually use a 7 1/4 blade
Answer:	It is an abrasive wheel meant to be used with a grinder. It is not intended, recommended, or tested by the manufacturer for use with a circular saw.
Question:	Whats the difference between the dw4712 and the dw 4712b? same pics
Answer:	The b stands for bulk. So no different just the way we buy them

Product description

Product Name:

2 Pieces 4.5-Inch Diamond Dual Blades or Wheels,two-in-one design for cutting and grinding stone



Specification:

Outer Diameter 115mm, With the Thickness of 2.6mm, Turbo segment design, 5/8"-11 arbor



Application:

CUT/GRIND/CARVING --- Granite Marble Concrete Brick and all similar construction materials



Feature:

1. Wet or dry working

2. Excellent cutting performance in hard materials with a long service life

3. Special design of the holes on the core help cooling when processing

4. Ideal for stonemasons and sculptors



Why SHDIATOOL:

SHDIATOOL is a professional manufacturer and supplier of diamond tools.We are focus on providing high-qulity and practical products for professionals.Our tools cover diamond saw blade,grinding wheel,diamond bits,polishing pads..., mainly for processing granite marble concrete ceramic porcelain block stone iron steel and so on.

• With 5/8-Inch-11 thread; Suitable for both dry and wet use
• Ideal for both professional stone fabricators and DIY home users
• Convenient two-in-one design, works as both saw blade and grinder
• Special design of the holes on the core help cooling when processing
• Grade A diamond crystals and medium bond for a wide range of construction materials

Product description

The DeWALT DW4712B 7", high performance masonry blade is a high quality blade intended for cutting brick & masonry material. It features a 5/8" diamond knock out arbor for a faster cut rate at constant depth which minimizes dust with thinner kerf. It lasts up to 30 times longer than abrasive blades and is for use o n 7" & 7-1/4" circular saws.

• The product is 7", high performance masonry blade, 5/8" Diamond knock out arbor
• Easy to use
• The product is manufactured in China
• High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal
• Thinner kerf to increase speed of cut while minimizing dust

User questions & answers

Question:	Does this work for cutting slate pieces
Answer:	It will a variety of masonry pieces including slate.
Question:	can I use this 7 inch blade in a 71/4 inch circular saw
Answer:	It will work as normal however the depth will be 1\4 inch less.
Question:	Do you need to cut concrete wet or can it be cut dried? My only concern is electrical shock with a circular saw
Answer:	I cut 32' of concrete with a circular saw to a depth of 2-1/2" with this blade and did it without water. The blade shows little wear.
Question:	will this blade work on an asphalt driveway
Answer:	I cut out a section of asphalt with this. Cut through easily. Also cut 2 inch pavers and old kiln fired brick. Pavers cut easily, brick was tough but got through that too. Helps to squirt the blade with water while cutting to reduce heat and dust.

Product description

ALSKAR DIAMOND has a very extensive standard selection of economically priced segmented blades for general contractor usage. The series is designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone. Can be used wet or dry. For light or medium duty cutters.

• Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry. For light or medium duty cutters.
• Sintered diffusion bonded.
• Segment height 10mm. Arbor 7/8"-5/8". Size is 10"x.070"x.395"/10mm.
• This diamond blade belongs to Alskar Diamond Segmented Lighting Series

User questions & answers

Question:	Can this cut SPC flooring
Answer:	It worked very poorly on bricks/concrete. It's not a very good blade in general, and I would not try it on nails. Get a blade specifically designed for metal.
Question:	Will this blade work on a worx wx427l 4.5" circualr saw
Answer:	It’s meant for cutting bricks, which it does okay with. Its a bit duller than a wood cutting blade.
Question:	I wonder how well this cuts hard thin veneer stone
Answer:	You can mount pretty much any direction. I just wouldn’t face them up, water would collect and ruin.
Question:	Some of the blades have a secondary hole, is this a guide pin? Will this work on arbor w/o this pin
Answer:	Doesn’t say it is. But hey, if you need a loud horn to save your butt. Go for for it. What’s the worse thing could happen. You get a fix it ticket? Just don’t use it for fun. Use to get out of harms way. Good Luck

Product features

Alskar Diamond Saw Blades

Alskar Diamond 4-1/2 inch General Dry or Wet Cutting Segmented Diamond Saw Blades

• ALSKAR DIAMOND has a very extensive standard selection of economically priced segmented blades for general contractor usage.
• The series is designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry.
• For light or medium duty cutters.
• Segment height 10mm. Arbor 7/8"-5/8". Size is 4.5"x.070"x.395"/10mm.

Alskar Diamond 5 inch General Dry or Wet Cutting Segmented Diamond Saw Blades

• ALSKAR DIAMOND has a very extensive standard selection of economically priced segmented blades for general contractor usage.
• The series is designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry.
• For light or medium duty cutters.
• Segment height 10mm. Arbor 7/8"-5/8". Size is 5"x.070"x.395"/10mm.

Alskar Diamond 6 inch General Dry or Wet Cutting Segmented Diamond Saw Blades

• ALSKAR DIAMOND has a very extensive standard selection of economically priced segmented blades for general contractor usage.
• The series is designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry.
• For light or medium duty cutters.
• Segment height 10mm. Arbor 7/8"-5/8". Size is 6"x.070"x.395"/10mm.

Alskar Diamond 7 inch General Dry or Wet Cutting Segmented Diamond Saw Blades

• ALSKAR DIAMOND has a very extensive standard selection of economically priced segmented blades for general contractor usage.
• The series is designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry.
• For light or medium duty cutters.
• Segment height 10mm. Arbor DM 7/8"-5/8". Size is 7"x.070"x.395"/10mm.

Alskar Diamond 8 inch General Dry or Wet Cutting Segmented Diamond Saw Blades

• ALSKAR DIAMOND has a very extensive standard selection of economically priced segmented blades for general contractor usage.
• The series is designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry.
• For light or medium duty cutters.
• Segment height 10mm. Arbor 7/8"-5/8". Size is 8"x.070"x.395"/10mm.

Alskar Diamond 9 inch General Dry or Wet Cutting Segmented Diamond Saw Blades

• ALSKAR DIAMOND has a very extensive standard selection of economically priced segmented blades for general contractor usage.
• The series is designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry.
• For light or medium duty cutters.
• Segment height 10mm. Arbor DM 7/8"-5/8". Size is 9"x.070"x.395"/10mm.

Alskar Diamond 10 inch General Dry or Wet Cutting Segmented Diamond Saw Blades

• ALSKAR DIAMOND has a very extensive standard selection of economically priced segmented blades for general contractor usage.
• The series is designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry.
• For light or medium duty cutters.
• Segment height 10mm. Arbor 7/8"-5/8". Size is 10"x.070"x.395"/10mm.

10 Pack) Alskar Diamond 10 inch General Dry or Wet Cutting Segmented Diamond Saw Blades

• ALSKAR DIAMOND has a very extensive standard selection of economically priced segmented blades for general contractor usage.
• The series is designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry.
• For light or medium duty cutters.
• Segment height 10mm. Arbor 7/8"-5/8". Size is 10"x.070"x.395"/10mm.

Alskar Diamond 12 inch High Speed Dry or Wet Cutting Segmented Diamond Saw Blades

• Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry. For light or medium duty cutters.
• Sintered diffusion bonded.
• Segment height 10mm. Arbor 1". Size is 12"x.125"x.395"/10mm. Includes 20mm heavy duty bushing.

Alskar Diamond 14 inch High Speed Dry or Wet Cutting Segmented Diamond Saw Blades

• Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry. For light or medium duty cutters.
• Sintered diffusion bonded.
• Segment height 10mm. Arbor 1". Size is 14"x.125"x.395"/10mm. Includes 20mm heavy duty bushing.

10 Pack) Alskar Diamond 14 inch High Speed Dry or Wet Cutting Segmented Diamond Saw Blades

• Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry. For light or medium duty cutters.
• Sintered diffusion bonded.
• Segment height 10mm. Arbor 1". Size is 14"x.125"x.395"/10mm. Includes 20mm heavy duty bushing.

Alskar Diamond 16 inch High Speed Dry or Wet Cutting Segmented Diamond Saw Blades

• Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Can be used wet or dry. For light or medium duty cutters.
• Sintered diffusion bonded.
• Segment height 12mm. Arbor 1". Size is 16"x.125"x.395"/12mm. Includes 20mm heavy duty bushing.

Product description

2 BRAND NEW DIAMOND BLADES 1pc 7" Wet/Dry Turbo Diamond Blade 1pc 7-1/4" Dry Segmented Diamond Blade Fits all 7" And 7-1/4" Circular Saws And 7" Angle Grinders Each Blade Has A 5/8" Arbor Hole With A Diamond Knockout Max RPM 8600 Great For All Your Concrete Or Tile Cutting Needs

User questions & answers

Question:	What is the max cutting depth if I use the blade on circular saw
Answer:	This blade is for cutting concrete, wet or dry.
Question:	Will these blades cut Asphalt
Answer:	I doubt a 12 inch blade will work on a 4.5 inch saw
Question:	Would this blade fit dewalt dwe575sb 7 1/4" circular saw
Answer:	Really well.... used it on veneer river rock... smooth finish but don’t force the cut let it glide natural with minimal pressure.... this prevents chipping & cracks
Question:	Do you think it will cut concrete
Answer:	Yes it will.

• 4-1/2” Premium Segmented Diamond Blade for FAST & RELIABLE Tile,Concrete, Cinder Block & Brick Cutting, compatible with All 4-1/2” Angle Grinders and marble cutters ,with 7/8” arbor
• Stronger hot-pressed cutting segments combines aggressive cutting ability with a fine, clean cut and no burning of the segments. Elimination the possibility of single segment detachment.
• Idea for Wet/Dry conditions Cutting in: Concrete, Masonry, Stone, Asphalt, Retractories and Granite
• Steel core is made from high alloy, heat-treated steel. ensuring clean cuts as well as a disc operation that is characterized by smoothness and a low level of vibrations.
• DESIGNED for Hard and Continuous use by professionals in construction, concrete fabrication, general maintenance, brick layers & general industrial applications, Each blade is engineered to work at 13,300 RPM and a maximum cutting depth of 1" to 1-1/4 inch

User questions & answers

Question:	Se puede usar en una sierra sircular de 5 1/2 ??grcias
Answer:	Looks like the picture. Works pretty good too
Question:	i want to use this blade to cut hardi bacher / concrete backer board. is it foe that type of material
Answer:	It's quite durable to use. It will last slightly longer on harder granite.
Question:	Country of origin
Answer:	Is to thin out concrete irregular so greater the amount of crystals will be best effect...
Question:	can this blade be used to cut thin metal
Answer:	Yes, you can use it to sand the surface smoother.

Product features

Caution

1. To set up the diamond wheel,the power must be disconnected.the arrow on the diamond wheel and the rotating direction of the machine must be corresponding.
2. Always wear protective goggles,protective gloves,facemask,safety shoes and working clothes.
3. Holding your cutting machine firmly and steadily while working.Do not overstrain the cutting blade,please cool the blade regularly.
4. Maximum rotation of the machine must not be faster as the allow rotation of the cutting blade.use the correct cutting blade(include correct outer diamater and center hole)for the various materials.
5. For wet cutting,allow running water to cool off the cutting tool.Be care of any electrical shocks or fire hazards.

Packing

Hard alloy tool head,qucik drilling ,long life the workman's chip discharge slot design

Advantage

1. Increase diamond density, increase product life and cutting speed.
2. High speed,Labor saving,Wear resisting,Cut sharp.

Thickness

The thickness is 1.8mm,Uniform thickness, speed balance.

• LSS diamond blades increase the density of diamonds and use higher-grade diamonds, which have high strength and are not easily deformed
• LSS granite saw blade adopts hot pressing process, combined with high-quality raw materials, to ensure the low amplitude and low noise of the product during high-speed operation
• Segment height 10mm. . Arbor DM-5/8"-7/8". size is 10 inch 100"x.395"/10mm
• LSS diamond blades can be used for both dry and wet, improving the diamond cutting speed and there are more sizes for selection
• LSS concrete blade adopts the design of turbine teeth and widens the cutter head, so that the cutting speed is faster and the performance is stable.
• LSS angle grinder saw blades are ideal for continuous use by professionals in industrial applications such as construction, concrete manufacturing and decoration

User questions & answers

Question:	I have a 5 1/2" circular saw. Should I get a 5" or 6" blade
Answer:	I can only say i was cutting 1 1/2 " limestone with no problem.
Question:	what's the cutting depth of the 14" blade
Answer:	These blades are quite robust. I used them to cut cinderblock without difficulty. Asphalt is made up of a lot of oil, the heat from the blades may melt the asphalt and possibly 'gum up' the works. I cannot say from experience. Give it a try, you'll have your answer fairly quickly. Good luck.
Question:	Will this fit on worm drive
Answer:	Yes. It fits any 7.25" saw. I used it to cut 2" thick limestone in a single pass.
Question:	Planning on cutting petrified wood with this blade. any experience? also is it compatible with the bosch go14 polisher? i know its rpm goes up to
Answer:	I guess it would depend on how thick the concrete is. One blade cut through 1.5 inch granite for 6 ft with no problem. Never tried on concrete.

Product features

Whirlwind USA LSS General Diamond Saw Blade

• Whirlwind USA LSS gold, economical segmented blades that can be used for general purposes. The LSS series is designed to provide fast and smooth cutting of bricks, concrete and marble in a variety of materials. It can match a variety of models such as paver, angle grinder and marble machine. Can be used wet or dry.
• Whirlwind is currently the largest diamond saw blade production base in China, aiming to provide American customers with the highest quality saw blades

Strong and Lasting

The cutter head adopts higher grade diamond, which is sharp and can be used for a long time

Faster and Simpler

Turbine segmented tooth design ensures easy and smooth cutting

Stable Cutting

Hot pressing process combined with high-quality raw materials, stable and safe cutting

Product description

Cutting Pro 14 inch Dry or Wet Cutting General Purpose Power Saw Segmented Diamond Blades for Concrete Stone Brick Masonry (14")

• Segment height 10mm. Arbor 1". Size is 14"x.125"x.395"/10 mm. Includes 20 mm heavy duty bushing.
• Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• Sintered diffusion bonded.
• Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• This diamond blade belongs to Cutting Pro Diamond General Purpose Segment Series

User questions & answers

Question:	which waydirection of travel
Answer:	No experience with this blade on petrified wood. In the pass I use a standard blade. Yes only we’re about to take a few cuts.

Product description

ABOUT PRODUCTION:

Item Name: 7-Inch Mesh Turbo Diamond Blade



Specification:

Diameter 7"/180MM, Bore 22.23MM, Diamond height 10MM, 22.23mm-15.875mm(5/8") washer, Segment thickness 1.7MM



Application: Hard material, granite marble tile ceramic brick ect.



Feature:

1. Dry or wet cutting

2. Hot-pressed sintered blades provide long working life.

3. New Design of Mesh turbo rim segment, the mesh turbo help to cooling and bring the dust out, so more efficient, fast and stable in cutting



ABOUT SHDIATOOL:

We are a professional Manufacturer & Supplier of diamond tools in China,

we could provide you following products used on Granite Marble Concrete Ceramic Tile Glass and Steel...

Diamond Cutting Discs Saw Blades

Diamond polishing pads

Diamond grinding wheels

Diamond drilling core bits

Other Diamond tools accessory (router bits, engraving bits, backer....)

If you have any needs or questions about our products,please contact to us firstly, thanks, we have good After-sales service, better quality and professional suggestions.

• Dry or wet cutting,for 5/8-Inch or 7/8-Inch arbor
• Application: Hard material, granite marble tile ceramic brick ect
• Diameter 7"/180MM, Bore 22.23MM, Diamond height 10MM, 22.23mm-15.875mm(5/8") washer, Segment thickness 1.7MM
• New Design of Mesh turbo rim segment, the mesh turbo help to cooling and bring the dust out, so more efficient, fast and stable in cutting
• Takes around 7-15days ships from China

User questions & answers

Question:	Will this cut glass tile? And will it fit a Skil Grinding tool
Answer:	It should. It comes with a spacer ring in the center that pops out for a bigger shaft