14 best shop fox table saws

• Motor: 2 HP, 115V/230V (prewired 115V), single-phase, 16A/8A
• Rip capacity: 31-1/2" right, 11-3/8" left of blade
• Max depth of cut at 90 degrees: 3-1/8"
• Max depth of cut at 45 degrees: 2-1/8"
• Table Size: 40-1/8" x 27"
• Distance from front of table to center of blade: 16-1/4"
• Floor-to-table height: 34-1/4"

User questions & answers

Question:	What shop fox moblie base fits this saw
Answer:	I've run it for about 15 minutes without overheating. I don't know how long it would take to cool down? When I first used it, it smelled hot; this was apparently just because it was new and oil film on the cutter head.
Question:	Whats the base of saws measurements
Answer:	I didn't know until you asked but I grabbed some from a package I just got and it shredded just fine, do I probably wouldn't do it all the time but yes it can.
Question:	Where can i get the circuit breaker part # x1888224x to convert the motor to 230v
Answer:	Sounds like perhaps an overload issue. Please contact manufacturer direct for tech support (800) 327-8508

Product description

SHOP FOX® Extension Table with Legs. This Table Extension provides extra surface support on table saws with long rails. Table measures 27" deep by 44" long. The extension table includes a leg kit which provides two 32-Inch high adjustable legs to provide stable support for the saw and table assembly. The extension table is made entirely of hardwood plywood with a durable laminated surface.

From the Manufacturer

An optional extension table measuring 44-Inch by 27-Inch is also available to provide a large work table surface. The extension table includes a leg kit which provides two 32-Inch high adjustable legs to provide stable support for the saw and table assembly. The extension table is made entirely of hardwood plywood with a durable laminated surface.

• Table measures 27-Inch by 44-Inch
• 2 Legs and Hardware Included
• Provides extra surface support

User questions & answers

Question:

Will this work on older Unisaws

Answer:

The country of origin for the BL29 is China. Robert Bosch Tool Corporation utilizes a global manufacturing strategy, which incorporates a global network of suppliers with our worldwide manufacturing locations in regions such as Asia, Europe, and the United States. Our manufacturing facilities around the globe are all owned and operated by the Bosch Group and maintain the highest quality standards. You can be assured that whatever country your Bosch product was made in, it will be made with the quality you would expect from Bosch. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Product description

SHOP FOX has added an outstanding Router Table Attachment that fits our W1819 and W1820 10-Inch Table Saws as well as most other 10-Inch cabinet table saws with only minor modifications. The cast iron Router Table Attachment with solid leg support utilizes a anodized fence and features a universal router mounting system that accepts most routers. Other features include a starting pin for contour shaping and a built-in dust port.

• Precision ground cast iron table with unique “double cross" 3⁄4-Inch by 3⁄8-Inch T-slots
• Accepts most brands of portable routers and the 27-Inch width will fit most table saws
• Aircraft grade extruded aluminum fence with two large aluminum lock handles, Fence size (x2): 121⁄2-Inch by 23⁄4-Inch by 5⁄8-Inch
• Table size: 27-Inch W by 20-Inch D, Table insert size: 4-Inch, Table T-slots 3⁄4-Inch by 3⁄8-Inch
• Equipped with a starting pin, 2-1⁄2-Inch dust port and an adjustable support leg

Product description

This wall mounted Dust Collector is designed to capture dust right at the source, eliminating the reduced efficiency of a duct system. With 537 CFM capacity, it will handle just about any hungry woodworking machine, and with no complicated duct system, static pressure loss is minimal. A simple wall mounted bracket and locking screw system also ensures you'll be safely up and running in no time!

• 1-horsepower motor, 120 or 240V, prewired at 120V, 7 amp at 110V, 3.5 amp at 240V
• Features window to gauge how much dust is in bag and bottom zipper for easy dust disposal
• Single 4-inch intake hole
• 2.5 Micron bag has 2 cubic feet capacity
• 44-inch height with bag inflated

User questions & answers

Question:	Is the impeller plastic or metal
Answer:	Sorry, no they do not, but I bought a cheap simple piezo buzzer from radio shack & a chrome switch & soldered it onto the board for sound, not the greatest buzzer but it works, I recently re-sold 2 of these on ebay because we prefer the Mel Meter with shadow detector built in & the cheaper Ghost Meter, they work much better after we've used all 3 for years, that's why we sold the k-2 it just got famous because they use it on Tv, but the Ghost meter has nice sound & looks good, not the Pro version of Ghost Meter, they kinda ruined it with that version, but just the plain old Ghost Meter, if you have the money spend a $100 on the mel meter if you have more get it with the shadow detector built in, it's works great,
Question:	Does the W1826 come with the cannister filter? The pictures for this item show it both with and without it. The description is equally vague
Answer:	I have had answers to questions. This is a research tool. What you do with the research is up to you. Since nobody has able to prove the tangible existence of ghosts, you have to kind of decide for yourself whether or not you've found ghosts. BUT, if it isn't ghost, it sure is SOMETHING strange because EMF is static doesn't behave like the readings you'll get. Maybe if you get one, YOU'll be he one who can prove what it is or isn't.
Question:	Is a cyclone-type separator recommended with this unit, or is it not needed
Answer:	Actually, this little meter has been around for a long time; only recently coming into fashion for "ghost hunting" expeditions. It can be used by electricians, plumbers heating and air people, burglar alarm companies, etc. in the fields of home building, protecting or repair. Look it up online with the query - "official uses for K-II EMF meter" and this should better answer your question.
Question:	could this be hooked up to a cyclone for better performance
Answer:	I am not sure - I will check with a friend of mine and see what he has to say as He is more knowledgeable on these things. and get back to you if you would like.

Product features

Shop Fox W1844 Dust Collector

This wall-mounted Dust Collector is designed to capture dust right at the source, eliminating the reduced efficiency of a duct system. With 537 CFM capacity, it will handle just about any hungry woodworking machine, and without a complicated duct system, static pressure loss is minimal. A simple wall-mount bracket and locking screw system ensures you'll be safely up and running in no time!

Wall Mount Dust Collector

You have many choices regarding dust collection ducting, but flexible hose is the most common for this size of machine. Flexible rubber hose, polyethylene, plastic flex-hose and other flexible ribbed hose is generally used for short runs. These are manufactured from materials such as polyethylene, PVC, cloth hose dipped in rubber and even metal, including steel and aluminum. If using flex-hose, you should choose one of the many types that are designed specifically for the movement of solid particles, such as wood dust.

Product description

This Universal Tablesaw Fence Clamp is perfect for attaching an auxiliary fence to your shop tools. No more headaches trying to use bulky C-clamps or screws that damage your fence. Use on tablesaws, bandsaws, router fences, or just about any machine that uses a fence. Ideal for creating stop blocks, used as bench dogs and an array of homemade jigs. Using wider auxiliary fence material allows for use on fences that are narrower than the stated clamp capacity.

• Capacity: Minimum: 2-1/2", Maximum: 5-1/2"
• Heavy-Duty Steel Construction
• Low-profile clamps stay out of the way
• Auxiliary fence requires 3/8” holes for clamp pins
• Sold in pairs

User questions & answers

Question:

Is the body made of metal or plastic

Answer:

I am sure they would be able to drill a hole into cement lap siding but would dull very quickly and possible chip out or tear the hole much larger than you want as they are sharpened to a very aggressive profile. If you only had a few holes to do it would probably be okay to use these for this purpose but masonry bit would be a much better choice as they are designed to not chip or tear out masonry.

Product features

Shop Fox Table Saw Fence Clamp

This Universal Tablesaw Fence Clamp is perfect for attaching an auxiliary fence to your shop tools. No more headaches trying to use bulky C-clamps or screws that damage your fence.

Protect your Fence and Blade

The Shop Fox D4586 allows you to quickly and easily attach a shop made auxiliary fence to your existing fence. These clamps stay out of the way and will not interfere with your work unlike bulky C-clamps.

Use on table saws, band saws, router fences, or just about any machine that uses a fence.

Variety of Applications

Ideal for creating stop blocks, used as bench dogs and an array of homemade jigs. Using wider auxiliary fence material allows for use on fences that are narrower than the stated clamp capacity.

Product description

Shop Fox Heavy-Duty 9 Roller Table D2271

• Item may ship in more than one box and may arrive separately
• 1,000-Pound capacity
• Four independently adjustable legs
• Height adjusts from 26-3/8-Inch to 44-1/8-Inch
• 9 Ball-bearing rollers
• One-year warranty

Product features

Shop Fox D2271 Heavy-Duty 9 Roller Table

Use this versatile roller table wherever you need extra workpiece support. Features all-steel welded construction and measures 19-by-65-inches long. This heavy-duty roller table will be one of the most useful and versatile tools in your workshop.

Adjustable Legs

This 9-Roller Table features four independently adjustable legs for any leveling requirement. Ideal for elevation drops or gains to accommodate uneven floor surfaces and direct your materials to where they are needed next. Adjusts in height from 26-3/8-inches to 44-1/8-inches. The legs are capped with no-slip rubber foot pads and lock securely with the ratcheting lever knobs. The nine ball bearing rollers effortlessly slide your work-pieces over the table.

Heavy-Duty

This heavy duty table offers a whopping 1,000 pounds capacity and weighs in at nearly 80 pounds making this roller table ideal for handling your larger stock. Works great as an outfeed stand for saws, planers, jointers and a variety of other machines.

Product description

Versatility, capacity, strength and exceptional value are key components going into the build of this middle-weight workhorse. European design elements, such as roller disc blade guides, steel column box-frame with rigid “W” shaped spine and a hinged blade guard enclosure are extras that make this saw a pleasure to use. With SHOP FOX, you don’t pay more for important accessories like the included miter gauge and a premium, dual-height fence with a hairline indicator scale. The cast iron and aluminum extruded fence can be set to the low (1/2") position for close-in detail work, or at 6" for extra support when resawing taller pieces. Add in a storage cabinet for blades, super-efficient dual-port dust collection, a quick-release blade tension lever and viewing windows for tracking and blade tension settings, and you’ve got a feature-packed machine with a small footprint and over-sized performance.

• Motor: 2 HP, 110V/220V (prewired 110V)
• Amps: 15A at 110V, 7.5A at 220V
• Table size: 21-3/4"L x 16-1/8"W
• Max cutting height: 14"
• Deluxe 2-height resaw fence

User questions & answers

Question:	Is it possible to use 220v only
Answer:	The blade itself is not 14 inches. That’s the size of the saw, or in other words the size of the clearance on the saw. The blade measures 120 inches.
Question:	What size of blade 14" does not sound right
Answer:	I can confirm that there is conflicting information in the manual. The power requirements are also inaccurate. So, unfortunately there’s no way to know for sure. What I can say as an able-bodied male is that it is possible to move it around on your own if you have a hand truck or dolly. It was hard, but I wheeled it to the back of my house, walked it slowly down some stairs and got it in place. Definitely advise having an extra set of hands available if possible, though.
Question:	What's the weight of this item? here on amazon, it claims 261 pounds. everywhere else that sells this item lists the weight as 360 pounds. what gives
Answer:	Manual says the motor runs at 1720 RPM.
Question:	what is the rpm of the motor
Answer:	Yes it comes with one blade

Product features

Shop Fox 14" Super Duty Resaw Bandsaw

Versatility, capacity, strength and exceptional value are key components going into the build of this middle-weight workhorse. European design elements, such as roller disc blade guides, steel column box-frame with rigid 'W' shaped spine and a hinged blade guard enclosure are extras that make this saw a pleasure to use.

Performance and Versatility

Take advantage of the dual-position resaw fence with a hairline indicator scale to provide maximum precision and support for resawing wide boards or re-position the fence in seconds to guide thin stock while allowing the upper blade guides to adjust as low as possible.

Cast Iron Wheels

The cast iron wheels ensure smooth, quiet and vibration free operation and provide a tremendous amount of inertia to easily hog through thick, dense material.

Tilting Table

The table can be adjusted 45-degrees to the right or 5-degrees to the left. There is a positive stop bolt that mounts to the body, under the table. When adjusted correctly, this allows you to easily bring the table back to 0-degrees after cutting at an angle without any further measuring or adjustments.

Utilitarian Design

We've added a storage cabinet to help keep your shop space clutter-free. Ideal for extra blades, push sticks or the optional miter gauge and/or ball-bearing blade guide assembly when not in use.

Dual 4" Dust Ports

Two 4" dust ports provide maximum dust collection and help keep your shop clean when used in conjunction with the appropriate dust collection system.

Optional D2057A Mobile Base

The W1849 Resaw Bandsaw becomes mobile when used with the optional D2057A Heavy-Duty Mobile Base. Easily move your bandsaw to the desired location or out of the way when not ripping through lumber.

Product description

A classic in design and function, this fence is the perfect after-market upgrade for table saw owners that expect high precision and ease of installation.

• Item may ship in more than one box and may arrive separately
• Easy to install and easy to set up on any brand of saw; UPC-coded packaging
• Long rails provide an awesome 54-Inch maximum rip to the right of the blade

User questions & answers

Question:	What is the length of the fence itself
Answer:	I never thought of this, but you probably could. The fence locks up entirely on the front tube and slides on pads not only on the rear rail but also on the table top so you can only go as wide as your saw top. The question is why would you want to? On "the 52" version , I made a extension top out of 2 pieces of MDF glued together for an additional 27" x 32" that sits between the front and rear rails for added work space and support for wide pieces. Hope this helps.
Question:	Can you use this system without the rear rail
Answer:	Both at the same time.
Question:	For those who did receive all of the parts, when did the second package get delivered? Same day, a week later, month later
Answer:	Hi ... if you have to drill
Question:	will it fit a Ridgid R4512 with out the need to drill
Answer:	The long arm extension is a square tube 1.57" x .7" made of mild steel. It is about .15" thick (estimate). The long arm is about 43" long and is cut to a shorter length for assembly.

Product features

Shop Fox W2006 Classic Fence

A classic in design and function, this fence is the perfect after-market upgrade for table saw owners that expect high precision and ease of use and installation. Also available with standard length rails (W2005).

A Smooth Operator

Simple cam lever action locks the fence solidly in position and torsion box design means no deflections while guiding wood. Adjustable slider pads ensure a precise fit and smooth adjustments with minimal effort. The self adhesive scale and magnified cursor provide fast and accurate fence positioning.

Lift-Off Design

Simple lift-off design makes fence removal and re-installation a breeze. A great feature when using jigs and fixtures or performing cross cuts with a miter gauge.

High-Density Polyethylene Face

The HDPE fence face minimizes friction for effortless material feeding and is replaceable should the blade accidentally be run into one.

Cam Action Lock Lever

The W2006 lock handle is cam actuated and locks against the machined edge of the front rail rectangular tube. If necessary, the locking pressure can be adjusted with two setscrews

Scale and Cursor

The W2006 features a self adhesive scale and magnified cursor to provide fast and accurate fence positioning.

Extension Table

The D3108 optional extension table can be mounted between the fence extension rails to provide workpiece support. The table measures 27 inch deep by 44 inch long.

Product description

Variable speed control, extra cutting capacity and cast iron construction are the features most sought after in a Scroll Saw. The Shop Fox Scroll Saw also offers a gooseneck work light, dust blower and dust port, large 45-degree tilt table and easy blade changes.

• 1/8HP, 1.2-Amps, 110-Volt, 60Hz motor
• 16-Inch maximum cutting width
• Includes a gooseneck work light, dust blower and dust port
• Plain or pin blades
• No load speed: 550-1700 SPM

User questions & answers

Question:	Well this cut O-1 steel 3/16ths thick
Answer:	I think the saw would handle it but you would smoke the blade. I cut some 1/2 Black Oak with my saw and the going was slow.
Question:	Will this work well with cutting 1.5" to 2' thick dried oak on a consistent basis
Answer:	I wouldn’t recommend it. Mine lasted about 3 months just cutting plywood.
Question:	For small projects (like puzzle making) would a respirator, an air purifier and a shop vac prevent dust problems if the saw is used indoors
Answer:	I think you pretty much have it covered, the Scroll saw does not make a lot of fine dust so most of it would be picked up with the shop vac, the Air Purifier is a Plus and a respirator will protect your lungs. other than that there may be residual dust that gets on the floor but not much.
Question:	What brand of scroll saw blades can this machine use? I just ordered it. THank you Fay
Answer:	We got the Proxxon 02815 set from Amazon (18 pieces), consisting of 28740, 28742 and 28744 scroll Saw Blades for DSH Coarse Pin End Blades, very satisfied with them.

Product features

Shop Fox W1713 16" Variable Speed Scroll Saw

Variable speed control, extra cutting capacity and cast iron construction are the features most sought after in a Scroll Saw. The Shop Fox Scroll Saw also offers a gooseneck work light, dust blower and dust port, large 45° tilt table and easy blade changes.

Table Tilt

The Shop Fox Scroll Saw offers the ability to cut at angles from 0-45-degrees with the table tilt mechanism. The table lock knob and tilt scale are used to tilt the table for horizontal angle cuts.

Keep your saw running smooth and your shop clean by connecting the 1-1⁄4 inch dust port of your scroll saw to a shop vacuum to keep the wood debris from accumulating underneath the table insert.

Plain and Pin-End Blade Compatible

The W1713 accepts standard plain or pin-end saw blades and is designed to make blade changes easy with the included adapters.

A adjustable hold-down shoe prevents the workpiece from rising up with the force of the moving blade while the air nozzle blows air at the cutting location to keep wood debris away from the line of the cut.

Product description

Great for bench-top tools like chop saws, drill presses, planers, scroll saws, and bandsaws. Support cross braces on top provide incredible strength and capacity. Flared legs and adjustable rubber feet ensure stability and reduce machine vibration. The particle-board table top (with faux butcher block laminated finish) measures 13" x 23" and is 30-1/2" tall. Bottom measures 21" x 32". 700 lb. capacity. Please note: This product is not recommended for use with casters.

From the Manufacturer

The Shop Fox D2056 Tool Table is great for bench-top tools like chop saws, drill presses, planers, scroll saws, band saws, etc. Support cross braces on top provide incredible strength and capacity. Flared legs and adjustable rubber' ensure stability and reduce machine vibration. Butcher block finish table top measures 13-Inch by 23-Inch and is 30-1/2-Inch tall. 700-Pound capacity.

• Sturdy design reduces machine vibration
• Support cross braces provide incredible strength
• Butcher block finish table top measures 13 by 23-Inch and is 30-1/2" tall
• 700-Pound capacity
• One-year warranty

User questions & answers

Question:	How to I get a replacement leg? Just set up the bench and the bottom of the leg has broken welds
Answer:	Butcher block finish table top measures 13" x 23" and is 30-1/2" tall. It also has a 700lb capacity. I would say yes. but it is a Craftsman....
Question:	Is this bench tall enough for a Craftsman Bench Top drill press
Answer:	Too many people have offered that it doesn't matter since they were clever enough to re-drill and tap their own size. I just wanted to confirm Frank Franz's helpful answer that these are M8 metric threads and Amazon does have locking casters that fit - just verify the thread on the casters is M8 and they fit just fine. I use the table as a base for a buffing station with 14" buffing wheels on a 36" wide shaft and the base is plenty stable.
Question:	Shop Fox D2056 Tool Table - can casters be screwed into legs? What size threaded post is needed
Answer:	Do you already have the Tool Table? If so, take the screw off of one leg of the table and take it to a hardware store or a lumber yard. The people who work there should have a gauge that will tell you the size of the screw and the thread pitch.
Question:	i want to put casters on this product, but i can't find the deminsion of the screw to the feet of this table. anybody have an idea
Answer:	Made.in China so there probably isn't one The best advice I.I can give you is to keep in greased and to use it for light projects

Product features

Shop Fox D2056 Tool Table

The Shop Fox D2056 Tool Table is great for bench-top tools like chop saws, drill presses, planers, scroll saws and bandsaws.

Arched support cross braces on top provide incredible strength and capacity. Flared legs and adjustable rubber feet ensure stability even on irregular surfaces.

Stable Work Surface

The D2056 Shop Fox Tool Table is designed to give you a solid, stable work surface. This table has a 700 lb. capacity and yet it is light enough to be portable. The 13 inches x 23 inches x 1 inch butcher block laminate work surface is the perfect size for bench-top tools.

Option to Add a Second Shelf

A second shelf can be added to the base, resting on the cross brace supports. This shelf can be cut from any plywood, solid wood, particle board or MDF material.

Use Included Feet

Please use the included feet. Casters are not recommended for use with this product.

Adjustable Feet

This tool table features adjustable rubber feet to reduce vibration and assure a firm grip even when the floor surface may not be level.

Footprint

The D2056 footprint is just 32 inches x 21 inches, ideal for shops with limited space.

Product description

Shop Fox W1716 Heavy Duty Adjustable Aluma-Classic Fence w/ Standard Rails

• Standard 57-inch rails provide 30-inch maximum rip to the right of the blade
• Fits most table saws easily
• Steel and aluminum fence body for durability, strength, and reduced weight
• Easy single locking cam action lever
• Wide right angle design for maximum accuracy and support

User questions & answers

Question:	will a magnetized featherbord work (adhere to) on this fence
Answer:	Really...
Question:	How far does the rear rail protrude from the back of the table saw? My saws motor rotates when the blade is tilted and is 1 3/4" from the table top
Answer:	Yes, you can use any brand of drill.
Question:	Will this fit my delta shopmaster ts
Answer:	Yes it does have square but. But not a single hex. Overall one of most useless item I bought on Amazon. Help your self not buying this tool.
Question:	Will this fit the porter cable pcb220ts jobsite saw
Answer:	Yes. It is magnetic.

Product features

Shop Fox W1716 Aluma-Classic Fence

Beefy extruded aluminum and steel construction and right angle design make this Aluma-Classic Fence durable and precise. Widely spaced adjustment points allow very precise set-up while the cam-lever front locking mechanism and torsion box design allow this fence to fit on just about any table saw without the need for a rear locking mechanism. Includes standard rails, a self-adhesive measuring tape and adjustable magnified cursor for quick positioning. Choose the Aluma-Classic Fence with long rails (W1720) for wide panel cutting up to 50-inches.

Magnified Cursor

The included self-adhesive measuring tape and adjustable magnified cursor offer the ability to quickly position the fence with a high degree of precision. The self-stick measuring tape mounts directly to the fence and features high visibility yellow with black numerals and graduations in both SAE and metric scales.

Heavy Duty Locking Lever

The Aluma-Classic Fence features a heavy duty locking lever to ensure no movement when the fence is set to your desired position. The cam lever action locks the fence in position and torsion box design means no deflection while guiding wood.

Product description

Shop Fox W2005 Heavy Duty Classic Support Fence System with Standard Rails

• Wide right angle design for maximum accuracy and support
• Single locking cam action lever HDPE plastic fence surface for extremely low sliding resistance
• Standard rails provide 25-Inch maximum rip to the right of the blade

User questions & answers

Question:	will this fence work with a delta TS300 table saw
Answer:	Yes I believe it will
Question:	Has anyone ever tried to put this on a unisaw? How is the bolt pattern matchup
Answer:	I have a 40+ year old Rockwell Delta Unisaw and it works perfectly.
Question:	will this fence line up with the existing holes and miter slot cut outs for an older grizzley(model G1023 table saw
Answer:	The answer is..........................................it should. Most saws use standard mounting holes. Worst case you would have to drill and tap which is easy as can be. I've had two of these fences and one came with the drill and tap and one didn't. In any case you can get both for maybe 10 bucks. You can also drill a hole through and use a bolt. Its a VERY simple process. Be scared of NOTHING. Great fence.
Question:	Will this fit a masterforce 10" contractor cabinet table saw from menards? i would like to get away from my split fence and have a true biesemeyer
Answer:	Without any of my own parts my Shop Fox adapted to my 43 year old Sears contractor saw. It isn't however, a Beismeyer; that would cost approximately double what the Shop fox cost. It is a very good fence I have no complaints.

Product features

Shop Fox W2005 Classic Fence

A classic in design and function, this fence is the perfect after-market upgrade for table saw owners that expect high precision and ease of use and installation. Also available in a long rail version (W2006).

A Smooth Operator

Simple cam lever action locks the fence solidly in position and torsion box design means no deflections while guiding wood. The HDPE fence faces minimize friction for effortless material feeding and are replaceable should the blade accidently be run into one. Adjustable slider pads ensure a precise fit and smooth adjustments with minimal effort. The self adhesive scale and magnified cursor provide fast and accurate fence positioning.

Lift-Off Design

Simple lift-off design makes fence removal and re-installation a breeze. A great feature when using jigs and fixtures or performing cross cuts with a miter gauge.

Product description

Increase your Shop Fox W1706 14-Inch Bandsaw's cutting capacity to 12-Inch high with this bolt-on 6-Inch extension block kit. Includes all necessary hardware plus extended blade guard and 105-Inch by 3/8-Inch - 6 TPI blade. Comes with instructions and requires no special tools to install.

• 6-Inch Riser Block
• Extended Guide Post
• Extended guard
• 105-Inch by 3/8-Inch - 6 tpi blade
• Hardware and Instructions Included

User questions & answers

Question:	I have heard that this extension causes a lot of vibration and wobble. Is that true? Does anyone get more blade drift due to the extra height
Answer:	On mine the bolt head and nut were 1" and 15/16". I do not have the original bolt to say what sizes are needed to remove the upper frame. You will also need some other tools, on mine i needed a 3/16" Allen wrench and a Phillips screwdriver. One may also need a 10 mm wrench depending on how your blade guard and guide post are attached. Shop fox suggests the following: Adjustable Wrenches . 2 Phillips Screwdriver #2...1 Hex Wrench 5mm and 3mm...1 ea
Question:	What size wrenches are needed for this install
Answer:	I have a delta 14 inch, and the pins don't line up properly. So, I drilled into the block so the pins on the bandsaw would fit into the rider block, and I cut the pins off the top of the riser block and bolted it together. Works just fine. The blade guard attachment certainly leaves more to be desired, but with some minor modification it is working as well. If you are not confident of making the modifications yourself, then buy the proper kit for your bandsaw.
Question:	Does anyone know if this will fit any other bandsaws
Answer:	This should work, but you should be prepared to make some slight modifications. The main fitment issues with these are lining up the locating pins. I had to drill out one hole in the base and one in the saw. The holes are there they just may need to be opened up some to fit. Once I did that, it's worked great on my Ridgid 14".
Question:	Would kit fit HFreight 14 in band saw
Answer:	Length of fence is 41 5/8”.

Product description

These Zero Clearance Inserts fit our W1824 Shop Fox 2 HP 10-inch Hybrid Cabinet Saws. Made with special phenolic composition.

• Product Type:Saw
• Item Package Dimension:38.608 Centimeters L X 10.16 Centimeters W X 1.27 Centimeters H
• Country Of Origin: United States
• Item Package Weight:0.800 Pounds

User questions & answers

Question:	Will this fit a w
Answer:	Most any drill has at least 3/8” chuck
Question:	will it fit W
Answer:	The SDC7 Step Drill Bit has a shank diameter of 0.375". For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	The zero clearance table saw insert D4329, that for shop fox W1824 will it fit W1819 also
Answer:	Hi! The NS50003 is designed for boring clean holes through wood, fast to run conduit or pipe. These bits should not be used in a drill press and are not intended for counter boring or doweling. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	will this insert fit the Shop Fox W
Answer:	Sorry for any confusion. The 8.9 mentioned is the height of the packaging. The bits on the NS5003 have a length of 6". For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.