9 best powertec band saws

Product description

Introducing the 9 Inch Band saw by POWERTEC.

This benchtop band saw miter gauge combo was designed to be an essential woodworking tool for delivering precision cuts, cutting irregular shapes up to 3-5/8 inches deep & 9 inches wide, and/ or ripping lumber into thinner pieces. It’s a must

have for any DIY woodworker or professional workshop.

High Precision Crosscuts and Angled Cutting

This band saw comes equipped with a miter gauge for miter cutting accuracy, angle stops and incremental control.

Make the Perfect Adjustments

The rack and pinion table is used to accommodate quick and accurate angle and height changes for your diverse projects.

Diversified Blade Range

Uses 62-inch blades anywhere from 1/8 to 3/8 inches in size (See POWERTEC 13134 for replacements).

Patented Quick Release Blade Tension System

Features a blade tension lever that makes blade changing fast and easy.

Easy View Blade Tracking

Our uniquely designed blade tracking window allows you to align the blade.

Dust Free Work Zone

Comes with a 2” dust port to connect to your shop vac – conveniently helping to keep your work space uncluttered and clear of dust and debris.

Specs

Motor Type: Induction 1/2 HP

Amperage: 2. 5 Amps, 1725 RPM

Blade Size: 62-Inch x 1/8-Inch x 3/8-Inch

Throat Capacity: 9-Inch Max.

Depth of Cut at 90 degrees: 3-5/8-Inch Max.

Depth of Cut at 45 degrees: 2-Inch. 50 lbs.

Aluminum Die Cast Table: 11-3/4-Inch x 11-3/4-Inch

Dust Port: 2-Inch

POWERTEC is a leading manufacturer of high quality woodworking tools and accessories, machines, and an assortment of OEM replacement parts. We are committed to exceeding expectations, while bringing the latest innovations, technology, and product

development to the industry.

From the Manufacturer

Induction Motor. 1/2 HP, 2.5 Amps, 1725 RPM, Blade Size: 62-Inch x 1/8-Inch x 3/8-Inch, Aluminum Die Casting Table Size: 11-3/4-Inch x 11-3/4-Inch, Dust Port: 2-Inch, Throat Depth: 9-Inch, Max. Depth of Cut at 90 degrees: 3-5/8-Inch, Max. Depth of Cut at 45 degrees: 2-Inch. 50 lbs

• Includes: BS900 110 Volt 9” band saw, miter gauge and 1/4” x 62 inch band saw blade
• Function: an essential woodworking tool for delivering precision cuts, cutting irregular shapes Up to 3-5/8 inches deep & 9 inches wide, or ripping lumber into thinner pieces
• Special features: patented blade guard adjustment for quick and easy blade replacement, A blade tracking window, and a 2” dust port that keeps work area clean and clear from dust
• Quick adjustments: table with rack and Pinion adjustment for easy 45 Degree angle tilt
• Power: band saw has ½ HP, 2. 5 amp motor – perfect for an assortment of wood based projects

User questions & answers

Question:	how easy is it to get replacement parts, like blade guides
Answer:	Apparently you can order parts as needed on the manufacturer website but honestly it is very easy to work on and I've had no trouble fitting my own mods, including better guides.
Question:	Where is the dust collector
Answer:	It does not have a dust collector device...you have to use your own vacuum cleaner while cutting or after you finish you work.
Question:	Does it come with a rip fence
Answer:	No. I bought a 3/8" blade to supplement the stock 1/4" blade and use the wider blade to rip with a straight board clamped to the table. It can cut thicker wood than my 10" table saw & can rip small stuff difficult to rip on a table saw.
Question:	can i split crablegs with the supplied blade
Answer:	You can, but why would you want to? With this saw, you can have *all* the crablegs. No splitting necessary.

Product features

9 Inch Band saw by POWERTEC

This benchtop band saw miter gauge combo was designed to be an essential woodworking tool for delivering precision cuts, cutting irregular shapes up to 3-5/8 inches deep & 9 inches wide, and/ or ripping lumber into thinner pieces. It’s a must have for any DIY woodworker or professional workshop. High Precision Crosscuts and Angled Cutting This band saw comes equipped with a miter gauge for miter cutting accuracy, angle stops and incremental control. Make the Perfect Adjustments The rack and pinion table is used to accommodate quick and accurate angle and height changes for your diverse projects. Diversified Blade Range Uses 62-inch blades anywhere from 1/8 to 3/8 inches in size.

Patented blade guard system

Patented blade guard system allows for quick and safe adjustment of cutting depth

Tilting table

Tilting table bevels 0 to 45 degrees for precision angled cuts

Easy view window

Easy view window allows you to easily track and align blade

Patented quick-release blade tension lever

Patented quick-release blade tension lever allows for easy blade changing

Product description

The POWERTEC BS900RF Rip Fence is ideal for use with the POWERTEC BS900 Wood Band Saw, and other compatible saw models. This rugged, dependable and ultra-convenient tool ensures that you have exactly the support that you need to achieve perfectly straight parallel cuts every time. Conveniently designed to fit, and firmly clamp, on any 11-3/4 band saw table. Its durable, industry-grade aluminum construction means it's built to get the job done every time. The POWERTEC Rip Fence installs square and solid for the optimum in high-performance sawing and critical worker safety. Handy cam-lever provides both hassle-free adjustment and secure placement lock, providing the utmost in dependability and rigidity. No assembly needed; it's ready to use right out of the package. Some adjustment may be required. This indispensable accessory is easy to handle and store - weighing in at 13.4 ounces. Dependable, rugged, essential!

• Sturdy Extruded aluminum construction means it's solid and durable
• Provides for straight parallel cuts.
• By using the handy adjustable cam, the clamp can adjust from 11-3/8-Inch up to 12-Inch
• Arrives fully assembled, right out of the package
• Simple, effective cam lever action means device is securely locked in place

User questions & answers

Question:	Hi would this fit a 9” harbor freight scroll saw
Answer:	You'd have to determine that yourself by measuring the table. if it measures between 11-1/8” to 11-13/16” and not thicker than 9/16” or with table saws or other saws requiring guide rails, it should fit.
Question:	Will it fit the dewalt 10 in table saw
Answer:	This fence is designed to fit a table with 300 mm x 300 mm, like Ryobi and POWERTEC 9" band saw. It would not fit deWalt 10" table saw.
Question:	Will this work on a tool shop 240-2114 9" bench top band saw
Answer:	I do not know if it would fit on your saw or not but I can tell you that the clamps are made of plastic. Mine broke and now I'm looking for a new one.
Question:	Does this fit the Ryobi 9" bandsaw
Answer:	YES. File the front guide flat and it's perfect for my Ryobi BS902.

Product features

The Rip Fence for POWERTEC BS900 Wood Band Saw with adjustable clamp

The POWERTEC BS900RF is designed to work with the POWERTEC BS900 and similar model band saws with 300mm or 11-13/16” tables . The unique fence clamps directly to the table providing support for your ripping applications – no rails are required. By turning the lock lever, the fence can be adjusted from 11-3/8” to 12”. Turn counterclockwise to increase the length, and clockwise to decrease or shorten.

NOTE: Fence will not work with table tops thicker than 9/16” or with table saws or other saws requiring guide rails.

Product description

Introducing the Zero Clearance Bandsaw Insert (5 pack) by POWERTEC.The zero clearance insert was designed keep your bandsaw blade in a tight, stable position to ensure high precision cutting action for your woodworking projects. With these inserts, you can instantly reduce the tearing out of your work stock and splintering when cutting on your band saw. It will also help prevent woodchips or small debris from falling down in between your blade and disrupting your workflow.Brand CompatibilityThis pack of inserts was specifically crafted to replace your old worn out stock inserts, and to accommodate your new and old Delta bandsaw variations.Package Contains Zero Clearance Bandsaw InsertsDimensionsOuter Dia: 2-1/2Inner Dia: 1-3/4Height: 3/32 x 3/16POWERTEC is a leading manufacturer of high quality woodworking tools and accessories, machines, and an assortment of OEM replacement parts. We are committed to exceeding expectations, while bringing the latest innovations, technology, and product development to the industry.

• INCLUDES: Zero Clearance Inserts (5 pack)
• FUNCTION: Reduces tear out and splintering on your work stock, preventing the blade from wandering, while producing efficient and high precision cutting action for your band saw blade
• COMPATIBLE: Designed to work with the Jet Bandsaw Table Setups
• APPLICATIONS: Best when utilized with thin, small delicate pieces, scroll work, soft wood or fine and detailed woodworking projects
• DIMENSIONS: 2-1/2-inch outer diameter, 1-3/4-inch inner diameter; height: 3/32-inch & 3/16-inch

User questions & answers

Question:	Will this fit a Rockwell Model
Answer:	Box says made in the USA and Imported components.
Question:	Do these fit the porter cable pcb330bs 14" bandsaw
Answer:	The pliers are not spring-loaded. You will have to manually open them after squeezing.
Question:	Any real benefit from using these
Answer:	Yes, the sheath has a sturdy plastic loop that can be connected to a belt, but it doesn't clip on and off.
Question:	What material are they made from
Answer:	GREAT I HAVE 1 LEFT

Product description

Introducing the Urethane Bandsaw Tires by POWERTEC.

 

These tires are designed to increase the efficiency and effectiveness of your bandsaw, while keeping it running smooth and safe. Made with premium polyurethane, these tires feature a strong and impact resistant profile that delivers optimal durability. More accommodating than both plastic and rubber, urethane tires can be stretched to fit your equipment and are specifically designed to stay in place without any type of adhesive. They do not rot or dry out. In addition, they feature a straightforward design, these tires are easy to remove, replace and install (depending on your specific needs). Includes instruction sheet.

 

Designed to Work with a Wide Range of Branded Band Saws

Jet

Delta

Grizzly

Porter Cable

Harbor Freight

Powermatic

Any bandsaw that requires a 12” x 7/8” tire

 

Size Dimensions

Diameter: 12 in

Width: 7/8 in

Thickness: 0.095

 

POWERTEC is a leading manufacturer of high quality woodworking tools and accessories, machines, and an assortment of OEM replacement parts. We are committed to exceeding expectations, while bringing the latest innovations, technology, and product development to the industry.

• INCLUDES: Urethane Bandsaw Tires, Instruction Sheet
• FUNCTION: These bandsaw accessories make for excellent replacement tires and are designed to fit any machine that requires a 12” x 7/8” by 0.095”
• VERSATILITY: Fits a wide range of band saws and popular brands, including Delta, Grizzly, Harbor Freight, Jet, Porter Cable, Powermatic, and others
• NO ADHESIVE: Designed to stay in place without any type of adhesive, making installation (and removal) quick and easy for a smooth workflow
• QUALITY: Urethane tires possess more flexibility than plastics, a higher load resistance than rubber, and flaunt an impressive amount of impact resistance and durability when compared to factory tires

Product description

Introducing the replacement Band saw Blades by POWERTEC. This high performance blade is designed to provide a reliable cutting action and deliver welds on wood, plastics and non-ferrous metals. Made from high carbon steel, these 59-1/4 x 1/4 band saw blades are heat resistant and offer a premium precision cutting user experience. Every weld is for proper tooth spacing, matched set and exact finishing. The band saw blade metal teeth feature an optimal geometric design and have been hardened to RC 64-66. POWERTEC band saw blades stay sharp with a long life and consistent performance. Our blades are built to wear evenly and deliver straight cuts at extreme speeds. PERFECT FIT Ryobi 9 Band Saw B& D 9 Band Saw Craftsman 9 Band Saw Tradesman 9 Band Saw Pro-Tech 9 Band Saw Collins 9 Band Saw B& D 3 Wheels Band Saw POWERTEC is a professional manufacturer of high quality woodworking machines, wood work accessories, and a wide assortment of OEM replacement parts. We are committed to exceeding expectations, while bringing the best innovations, technologies, and product development to the industry.

• Includes: 59 1/4 inch band saw blade (one piece) – suitable for most 59-1/4” long, 1/4” wide, 0. 014” thick, band saw blades
• Quality: the band saw blade is made from premium, high grade carbon steel with heat resistance and weld
• Design: This precision cutting tool is constructed with an optimal geometric tooth arrangement that provides seamless cutting results at high performance speeds
• Application: flexible carbon hard edge blade works perfectly with hard and soft woods, plastic, and plus non-ferrous metals
• Teeth specs: 14TPI blade has a raker set/ Regular teeth profile

User questions & answers

Question:	Is this blade the same as Ryobi part number
Answer:	The Wallet Ninja is 1.6 oz.
Question:	Will this saw blade fit a skill band saw, model 3386-01, which takes a 59 1/4 to 59 1/2 inch blade
Answer:	No clue. I've never heard of a pocket monkey. It doesn't have a phillips screwdriver either.
Question:	would this be a good blade for resawing
Answer:	A message from the manufacturer: While flying with our tools it is important to stay informed​​​. Though TSA does not provide an official approval certificate on any of its items, the only thing we can ensure is that our tools will fit inside of their guidelines. Most TSA Agents are uninformed themselves and will use a conservative approach​ when dealing with an unknown situation. It's a lot easier for them to say something is prohibited and move on than doing their due diligence.​According to the official TSA website (http://www.tsa.gov/traveler-information/prohibited-items)​Scissors - metal with pointed tips and blades shorter than 4 inches are allowed, but blades longer than 4 inches are prohibited NO OKOur tools meet the guidelines because1. There are no actual "blades" or sharp edges, the entire unit is rounded off with soft corners2. The entire tool isn't longer than 4 inches. Metal with pointed tips shorter than 4 inches is very much permitted. These 2 points alone should be enough to make your case. Remember, TSA Agents don't have these rules memorized, so it is important that you do!
Question:	I need a blade that cuts steel for Ryobi
Answer:	This is a tool for EOD people. It does everything you need when doing this job. Blade does lock as well as the other tools.

Product features

POWERTEC High Carbon Bandsaw Blade For Woodworking, Plastic and Aluminum

This high performance blade is designed to provide a reliable cutting action and deliver welds on wood, plastics and non-ferrous metals. Made from high carbon steel, these band saw blades are heat resistant and offer a premium precision cutting user experience.

Every weld is for proper tooth spacing, matched set and exact finishing. The band saw blade metal teeth feature an optimal geometric design and have been hardened to RC 64-66.

POWERTEC band saw blades stay sharp with a long life and consistent performance. Our blades are built to wear evenly and deliver straight cuts at extreme speeds.

DESIGN

This precision cutting tool is constructed with an optimal geometric tooth arrangement that provides seamless cutting results at high performance speeds

QUALITY

The band saw blade is made from premium, high grade carbon steel with heat resistance and weld

APPLICATION

Flexible carbon hard edge blade works perfectly with hard and soft woods, plastic, and plus non-ferrous metals

Product description

The POWERTEC UT1002 Universal tool stand with split MDF top is perfect for using a vast array of smaller, compact bench-top machines, power tools and accessories. Constructed of heavy gauge steel with an expandable 14" By 25" Split MDF top to accommodate a wide variety of different sized tools. This stand has a load capacity of 500 lbs. And a storage shelf below, features adjustable non-skid foot pads and an adjustable foot for stabilizing on uneven surfaces.

• INCLUDES: Universal Power Tool Stand
• APPLICATION: Ideal for supporting a variety of smaller, compact bench-top machines, power tools and accessories, while giving you a sturdy, yet small and dependable work surface
• FEATURES: 500 pound load capacity to accommodate a wide assortment of tools and equipment, adjustable foot pad for stability and a heavy gauge metal base powder coat finish for long-term durability
• NON-MARRING: Equipped with rubber feet that not only reduce equipment vibration, but they offer an anti-slip, skid free and non-abrasive profile that protects your floor for scuffs and scrapes. IMPORTANT: The UT1002 Universal Tool Stand is not designed to be used with casters as it destabilizes the stand. Adding casters will void the warranty on this product.
• DIMENSIONS: 32-Inch working height. 18" x 27" storage shelf, 14” x 25” expandable MDF split top with ruled surface (expands to 20”x25”)

User questions & answers

Question:	Can i use this as a anvil stand
Answer:	I probably wouldn’t. I use mine for a table top scroll saw that’s about 50 pounds. I just think between an anvils weight and the constant pounding, the stand might give.
Question:	Where do we install the spare washer on the sliding table top
Answer:	I do not understand what you mean by sliding table top. My is secured.
Question:	How big of a drill press will this hold
Answer:	The footprint can be as large as the top shelf or if you need it bigger than you can add another top shelf on top of existing or to replace it which is what I did to enlarge the surface of the top shelf. If by big you mean weight then I can't really help other than to say I have a pretty hefty saw affixed to the stand and the legs haven't buckled yet.
Question:	I ordered this and I would like some suggestions on hardware, what size hex head bolts/nuts. I'm going with 3/4 plywood on top, thanks
Answer:	I countersunk relatively small Phillips head nuts and bolts that I had around the house to make the surface flat. No need to tie it down with hex head bolts since all you want to do is stop it from slipping. The weight of whatever you put on top will hold it down.

Product features

The Universal Tool Stand by POWERTEC.

The POWERTEC UT1002 Universal Tool Stand is designed to provide you with a solid, sturdy and versatile working surface that offers flexibility for many of your day-to-day applications. It’s the perfect support option for your bandsaws, disc sanders, drill presses, planers, and other bench-top tools.

500lb. Weight Capacity

Featuring a portable and lightweight design, this tool stand flaunts an impressive 500lb capacity – effectively able to support many of your benchtop tools, powertool supplies and woodworking accessories.

Expandable MDF Split Top with Ruled Surface: 14” x 25”, expands to 20” x 25”

One Adjustable Foot

Hardware is supplied to make one of the feet adjustable.

Insert the screw head into the pad, and thread the nut onto the screw. Assemble the foot, flat washer and nut inset.

Product description

"Remember when power tools were actually powerful? Reminiscent of your Grandpa’s bandsaw, the WEN 10-Inch Two-Speed Band Saw is the perfect companion for any workshop. With a 3.5-amp motor and a 9-3/4 inch throat, this beast will attack boards with cuts up to six inches deep and 9-3/4 inches wide. Two-speed operation allows for speeds of either 1520 or 2620 FPM. The design of this saw uses 72-inch blades anywhere from 1/8 to 1/2 inches in size for a variety of both intricate and powerful cuts. The spacious work table measures in at 14 x 12-1/2 inches in size and can be swiveled up to 45 degrees. This package includes a flexible work light to illuminate the worktable, a 3-in-1 dust port to fit a variety of dust extractor hoses (1-3/4, 2-3/4, 4 inches), a fence for creating straight cuts, a miter gauge for angled cuts, and a stand. Ball-bearings give the blade smooth operation and a long lasting life for years of dependable service. The easy-to-assemble stand elevates the bandsaw without sacrificing space on the shop’s work bench. And because it’s a WEN product, your WEN 10-Inch Two-Speed Band Saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly and helpful customer phone line all to make sure you remember WEN. Remember when you had a versatile and powerful woodworking saw? Remember WEN."

• 3.5 amp motor creates cuts up to six inches deep and 9-3/4 inches wide
• Uses 72-inch blades anywhere from 1/8 to 1/2 inches in size
• Spacious 14-1/8 x 12-1/2 inch work table bevels up to 45 degrees
• Operates at two speeds of either 1520 or 2620 FPM
• Optional stand allows for either floor standing or bench top applications
• Includes a 2-year warranty, a stand, a work light, a 3-in-1 dust port, a fence, a miter gauge, and a 3/8-inch blade (6 TPI)

User questions & answers

Question:	When centering the blade on the tires, should the blade or the gullets be centered
Answer:	According to Alex Snodgrass the band saw guru with Carter power tools, the gullet of the blade is what should be centered on the tire.
Question:	Do I have to buy the 72 inch blades, or is there some room for a 72 7/16 blade to fit it
Answer:	I don’t have a different answer, but I feel bad for the person that has 21 downvotes, because they’re not wrong. This saw is available in 3 sizes. 72 is for the 10”, 62 is for the 9”. Sorry, ccbdav. Don’t let em get you down.
Question:	Has anyone used this tool to cut thru 4 inch oak? For example table legs
Answer:	The blade that came with it is actually not bad at all as I cut a 5 inch diameter oak log from a chopped tree in my back yard down to a 3"x 3" x 2' piece of usable lumber. I was impressed. I later bought a bi-metal 1/2" 14TPI blade and installed it for metal cutting. It did cut with no effort a 1" thick T6 aluminum. I am not sure if if can do thicker as I did not try it. I also cut 1/2 mild steel bar with no problem at all. No binding or stalling. All the cuts of wood or metal were straight. You just have to let the blade do the work and not force feed it through
Question:	Where is it manufactured
Answer:	There's a tiny island off the north west coast of Mauritius called Gelff. Not even on most maps. Discovered by captain James Cook in 1752. In 1754 Gelff, represented by James Cook in Spanish courts, was granted sole manufacturer of the WEN 3962 Two-Speed benchtop bandsaw. Raw materials are brought in on one side of the island. Some kind of assembly/manufacturing factory must be inland somewhere, they don't allow access to the interior. The fact that this is such a fine product becomes obvious when one visits the far side of Gelff, where cargo ships are waiting to load and deliver this product around the world.

Product features

WEN Two-Speed 10-Inch Bandsaw with Stand

Remember when power tools were actually powerful? With a 3.5-amp motor and a 9-3/4 inch throat, the WEN 10-Inch Two-Speed Band Saw will glide through boards with cuts up to six inches deep. This saw uses 72-inch blades anywhere from 1/8 to 1/2 inches in size for both intricate and powerful cuts. The spacious work table measures in at 14 x 12-1/2 inches in size and can be swiveled up to 45°. Two-speed operation allows for speeds of either 1520 or 2620 FPM. Ball-bearings give the 10-inch wheels smooth operation and a long life for years of dependable service. The easy-to-assemble stand elevates the band saw without sacrificing space on the shop's work bench.

3-in-1 Dust Port

The WEN Band Saw includes a 3-in-1 Dust Port to fit a variety of dust collection hose sizes (1-3/4, 2-3/4, 4 inches).

Two-Speed Operation

Run the blade at either 1520 or 2620 feet per minute to meet the needs of any given project.

Variety of Blade Options

Use 72-inch blades anywhere from 1/8 to 1/2 of an inch in size depending on the intricacies needed.

Bevel Cuts from 0° to 45°

Create angled cuts up to six inches in depth by beveling the 14-1/8 x 12-1/2-inch table up to 45° to the right.

Equipped with a full 6 inches of resaw capacity

Remember when you could cut wood up to 6 inches thick in a single pass? The WEN 10-Inch Two-Speed Band Saw provides you the capacity to attack boards up to six inches thick. Combine this with the 9-3/4-inch throat for a machine that can take on more wood than other 10-inch band saws.

Packed with additional accessories

The WEN Band Saw includes a flexible worklight to illuminate your work piece, a sturdy fence for creating straight cuts, a miter gauge to cut along specific angles, a 3-in-1 dust port to meet the needs of a variety of dust collection hoses, and a 25-inch stand to keep the band saw elevated.

Product description

The POWERTEC 71005 Deluxe table saw miter gauge features a generously designed grip, for comfort and strength, giving the user ease and control and designed for superior accuracy. The gauge made to fit miter grooves measuring 3/8 by 3/4 inch, includes an adjustable guide bar for easy fit into tight tolerance miter slots. The miter gauge has positive stops at all common angles. A washer is included to prevent tipping when the gague is Extended over work surface edges.

• INCLUDES: Table Saw Miter Gauge
• FUNCTION: Provides you with a premium table saw miter gauge replacement that allows you to make crosscuts at any angle with high precision
• FEATURES: Positive stops at all common angles for exceptional accuracy, a large ergonomical grip for control and comfort, set screws to remove any play, and a tip resistant washer to keep the unit steady when extended over your work surface
• COMPATIBILITY: Fits and accommodates most standard 3/4 x 3/8 inch miter slots, with or without t-slotted miter slots, including DeWalt, Delta, Jet, Craftsman, Bosch and other brands of table saw and router table slots
• PREMIUM BUILD: Made with a combination of a high quality aluminum head and solid steel miter bar, this woodworking gauge was built for professional use and long-term durability

User questions & answers

Question:	Will this fit my Jet contractor's table saw
Answer:	If the slot is the standard 3/4" wide and 3/8" deep it will fit. My guess is that Jet uses the standard miter gauge size.
Question:	will work with the Bosch ra1171 table
Answer:	Not knowing the specifications of the Bosch table saw table slot, I can't answer your question except to say the bar is NOT a "T" bar. It simply a 3/4" wide by 3/8" thick length of steel. It didn't work with my Hyundai saw until I had the bar machined to fit my "T" bar slot.
Question:	Will this fit a sws 10" table saw
Answer:	will this fit a craftsman model # 137218020
Question:	Does anyone know if this will fit the ryobi rts
Answer:	If you have a 3/4" slot, it will fit.

Product features

The Deluxe Table Saw Miter Gauge by POWERTEC.

This specialty miter gauge is designed to help you make consistent and highly accurate crosscuts at any angle for your woodworking applications. Made to accommodate 3/4” wide by 3/8 inch slots, with or without t-slotted miter slots, it serves as an ideal replacement and upgrade for most popular brands of table saws.

Positive Stops at All Common Angles

Possesses 30, 45, 60, 75 and 90 degree stops. Additionally, you can manually set it to hold any position in-between, and all stops can be made in both directions for project versatility.

Additional Features

Gauge comes complete with a tip resistant washer that works with t-slotted miter slots to prevent tipping when the gauge is extended over your work surface edges and can be removed for non-t-slotted miter slots. It also comes complete with set screws to remove play and eliminate wobbling in the t-track.

Well Crafted Design with a Premium Build

Our table saw miter gauge features a heavy duty cast metal construction with a smooth, midnight black profile for a low-friction fit. It is accompanied with a large grip designed for outstanding control and superior comfort, with an easy to adjust angle setting.

Product description

If you ve ever injured your hand operating power or saw equipment while maneuvering stock materials then you know the importance of hand safety, and keeping them away from blades and cutters. Whether you re a novice or experienced DIY kinda guy, taking the necessary steps towards preventing accidents is part of being a professional. Introducing the Deluxe Magnetic Push Stick by POWERTEC. This well crafted protective tool is perfect for an assortment of woodworking applications. Not only does it help keep your hands out of harms way, but it reduces the risk of kickback, which often leads to a smoother cut, producing a more professional looking finish. Unlike many standard sized or wooden push sticks, this deluxe version allows you to comfortably grip the handle without having to shift or adjust your grip during application (which can be extremely unsafe). The push stick conveniently measures 11-1/2-Inches in length ensuring maximum versatility, and features an angled mouth tip which can be used with a multitude of machines, including shapers, jointers, table saws, and more. Store the push stick directly onto the ferrous metal surface, cast-iron worktable, or saw utilizing the convenient two embedded handle magnets, keeping this handy tool within arms length.

• INCLUDES: Deluxe Push Stick (Magnetic type)
• FUNCTION: Provides preventative hand protection and optimal stock movement control of your workpiece while it is being pushed through the saw blade or cutting head – Built-in magnets provide convenient storage on your saw or ferrous metal surface
• APPLICATIONS: Woodworking push sticks are commonly used in combination with tablesaws, radial arm saws, bandsaws, shapers, router tables, and jointers
• CRAFTSMANSHIP: Since occasional contact with the blade is inevitable, these well crafted woodworking hand safety tools were constructed for long-term durability, and designed to work securely with cleats, notches and other nonslip surfaces(Patent pending)
• DELUXE GRIP: This premium version features a contoured ergonomic handle that’s easy to work with and feels natural in the hand

User questions & answers

Question:	What is the width of the business end on this stick
Answer:	1/2”

Product features

The Deluxe Magnetic Push Stick by POWERTEC

This well crafted protective tool is perfect for an assortment of woodworking applications. Not only does it help keep your hands out of harms way, but it reduces the risk of kickback, which often leads to a smoother cut, producing a more professional looking finish. Unlike many standard sized or wooden push sticks, this deluxe version allows you to comfortably grip the handle without having to shift or adjust your grip during application (which can be extremely unsafe).

The push stick conveniently measures 11-1/2-Inches in length ensuring maximum versatility, and features an angled mouth tip which can be used with a multitude of machines, including shapers, jointers, table saws, and more. Store the push stick directly onto the ferrous metal surface, cast-iron worktable, or saw utilizing the convenient two embedded handle magnets, keeping this handy tool within arms length.