14 best bosch workstations

Product description

The New Bosch GTA3800 features a jobsite tough deign with integrated wheels eliminating heavy lifting and giving the professional the ability to roll the saw anywhere.

• Rapid release universal tool mounts-adapts to most competitors' saws; quick-release lock to attach and detach saw to/from stand with ease
• Adjustable roller material supports- adjust up and down to accommodate various sized saws-features extra wide roller for larger material
• Repetitive stops- quick and easy set-up for making repetitive cuts to length
• Carry Handle with Wrench Storage - Ergonomic One-Handed design for quick and easy transport on and off the job
• Dual sliding rails - expand up to 12-Feet -9-Inch to support up to 16-Feet material
• Height: 32.5 Inches,Length: 62 Inches,Length extended: 153.0 Inches,Material: Heavy-Gauge Aluminum, Vertical Height of Stand: 32.5 Inches,Width: 32.5 Inches.

User questions & answers

Question:	Can you buy extra material supports to fit on the rail of the stand? Thanks
Answer:	Your Bosch saw should have sides that pull out
Question:	Is it possible to buy a second set of wheels for the other end, so I can roll it into the bed of my truck without turning it around
Answer:	Not sure, the weight is towards the wheel end, I wouldn’t think you would want your saw weight on top end, but perhaps you have more brute strength than I.
Question:	Will this stand work with a Hitachi Chop saw
Answer:	Thank you for your interest. The GTA3800 miter saw stand will work with several manufacturers miter saws however, we have not tested any of the Hitachi models with this saw to verify compatibility.
Question:	what is the height from the top of the rail (bed) to the floor
Answer:	Thank you for your question. The GTA3800 height is 31 3/4" from the floor to stand. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)

Product features

Bosch GTA3800 Folding Leg Miter Saw Stand,Blue

The Bosch GTA3800 Folding-Leg Miter Saw Stand with Wheels features an industrial-tough design and is an indispensable accessory for mounting miter saws on job sites and moving between work areas without dismounting the saw. This light and strong stand fits most miter saws on the market, including the Bosch 12-in., 10-in. and 8-1/2-in. single- and dual-bevel miter saws – as well as competitor saws. The stand has smooth end rollers that are modifiable in height to match the height of the user's miter saw. Adjustable rails on the compact miter-saw stand hold workpieces up to 16 Ft., and they have stops to set up for duplicate cutting. The adjustable leveling foot works on uneven surfaces. The stand is equipped with transport wheels for easily moving it from location to location without removing the saw.

Product description

Bosch 1617EVS wood router tool kit 12 amp 2 1/4 Horse power fixed base hand router with 1/4 inch and 1/2 inch collets. Case type: Hard plastic. Double insulated.

Handle a broad range of routing applications with the versatile Bosch 1617EVS Variable-Speed Router. This router kit includes a powerful motor with advanced speed-control technology, a fixed base for upright use or use in a router table, and plenty of high-performance features to help you get a variety of jobs done quickly and accurately.

• 12 Amp router motor - Combines ample power with adjustable speed settings, allowing users to glide along cutlines
• Adjustable speed dial (8000-25,000 RPM). 2 inch sub-base opening
• Fixed base has threaded holes for mounting to router table positioned in common 3-hole pattern
• Now includes RA1161 fixed-base with system for adjusting bit height from above a router table
• Compatible with optional RA1129 template guide adapter set – For easy change of Bosch quick-release template guides and common threaded template guides; Includes RA1126 template guide adapter and RA1100 interface for threaded template guides

User questions & answers

Question:	I have a porter cable 4216 dove tail jig does this work with it or do i need to purchase optional bases with it
Answer:	I am not sure about that but with enough duct tape, screws, epoxy, and good old American ingenuity, anything is possible! Seriously though, i know there are multiple screw holes in the base plate, but whether or not they will line up to your Porter cable jig, i am not entirely sure. I do know this is a great router, its the first one I have owned, but not the first I have used. Plenty of power for bigger bits and smooth precise adjustments, easy to handle and manipulate. Quieter than alot of others I have used.
Question:	Is this router available in Europe in 220 Volt
Answer:	We have just purchased a (GOF 1600 CE) router from Bosch. This router is 220 volts and came with two bases. This router will not operate in a conventional router lift, as the power switch is on the handle and not on the motor. The unit was supplied with two bases, one plunge base and one non plunge base. The non plunge base may be used to mount the router to a table. Is what Bosch needs, is a kit to make the router work in a proper router lift.
Question:	Is it made in USA
Answer:	Thank you for your question. The Bosch 1617EVS router is manufactured in Mexico. Robert Bosch Tool Corporation utilizes a global manufacturing strategy, which incorporates a global network of suppliers with our worldwide manufacturing locations in countries such as Germany, Mexico, Switzerland, China and the United States. Our manufacturing facilities around the globe are all owned and operated by the Bosch Group and maintain the highest quality standards. You can be assured that whatever country your Bosch product was made in, it will be made with the quality you would expect from Bosch.
Question:	With ra1181 table, do you need ra1165 under table base for over table adjustment if buying 1617evs router? description implies it is not needed
Answer:	You do not - need - to buy it. However, you may still want to buy it if you plan to use the router above table. To eliminate the hassle of installing the router’s base which comes with the router (with the two handles) under the router table, and later having to convert it back for non-table use, Bosch offers the optional RA1165 under table Router Base. The RA1165 base (that is sold separately) is designed to be permanently attached your router table, leaving the router base that comes with the router ready for non-table use. Wish other router manufactures got smart and did this too.
Question:	Will this router run on 220-240V power, or only
Answer:	The router requires 110V
Question:	is it made in usa or china
Answer:	No.....Mexico
Question:	What kind of router bits are good for this router ? Or are any compatible
Answer:	This router has both a 1/4" and 1/2" collet so it will accept both size shank bits. I prefer the buy 1/2" shank myself especially in larger bits, they are a little more expensive but seem to run better and last longer. When it comes to brands of router bit Freud is always the first place I shop. I have also had really good success with CMT and Bosch because my local big box store doesn't carry Freud. One thing I will saw about router bits is its always better to buy quality bits they will last for years and produce better results. Amazon has some nice bits sets that come with a lot of common bits that are nice for a person new to the router.
Question:	Can anyone explain the difference between this kit DW618PKB and the DW618PK kit? Are the routers / bases the same
Answer:	They are both the same tools. The only difference is that DW618PK includes a hard plastic case. Whereas, the DW618PKB includes a cloth carrying bag.

Product features

Accuracy

This versatile kit provides all the components necessary for fixed-depth routing.

Top Tier Power

Among the most powerful routers for woodworking at 12-amps, 2.25-horsepower, and 8,000-25,000 RPM.

Versatility

The hand router’s variable speed dial allows you to set the optimal speed

One Button Operation

The power switch is completely dust-sealed for added durability.

Product description

Miter Saw Stand, Length 51 In., Width 27-3/4 In., Height 33-1/2 In., For Use With Mfr. No. 5312, 4212, 4410, 5412, 4410L, 5412L, and 4212L, Features Supports up to 18 ft. of Material, Adjustable Telescoping Leveling Legs, Adjustable Height, Universal Mounting System, and Rubber Wheels, Includes Universal Rapid Release Tool Mounts

The Bosch TB4 gravity-rise miter saw stand features the patented gravity rise system, and rapid set up and breakdown. It has an 18-inch material capacity which is the highest capacity among fully portable units. It has 8-inch pneumatic wheels which facilitate ease of transport over jobsite terrain. It also features rapid release tool mounts, adjustable leveling feet for stability on uneven surfaces and it also fits most competitors' miter saws.

From the Manufacturer

Bosch expanded its patented and award-winning technology to develop and introduce the new Gravity-Rise T4B Portable Miter Saw Stand. Smart, durable and simple to use, professionals never need to worry about how to setup or carry their miter saw ever again. The T4B features the same Bosch-patented Gravity-Rise system as the industry's award winning TS2000 Gravity-Rise Table Saw Stand. Unlike other miter saw stands, the Bosch Gravity-Rise system is practically effortless and allows for rapid set-up and breakdown in seconds. With a simple turn of the release lever and the user's guidance, the weight and balance smoothly raises the heavy-gauge steel and aluminum constructed stand and saw into working position. Set the leveling-Feet for uneven terrain and professionals are ready to get to work. Turn the same release lever again and the entire stand folds into a push cart design, complete with 8-Inch pneumatic wheels, perfect for transporting the saw over rough terrain from one location to the next. The T4B utilizes an aluminum support rail and special Universal Rapid-Release Tool Mounts designed to attach to the base of all Bosch and most competitors' miter saws. These mounts allow any user to quickly attach or detach the saw to the stand. And rubber-Feet prevent scratches when placing the tool on a cabinet top or bench. The same support rails expand for 18-Feet total material support, the highest among fully portable units. For users cutting long pieces of molding or flooring, this kind of support is priceless. Adjustable repetitive stops and table supports also allow the stand to adapt to varying applications and saws.

• ADJUSTABLE: Featuring a Bosch-exclusive, patented Gravity Rise System designed for rapid set up and easy breakdown, taking the toughest jobs to the next level
• CAPACITY: The Bosch T4B Gravity-Rise Miter saw stand has up to 18 feet of material capacity, the highest capacity among fully portable units
• PORTABLE: Built with 8-Inch pneumatic wheels for ease of transport over jobsite terrain with even the heaviest miter saws attached
• UNIVERSAL: Featuring Rapid Release tool mounts - for use with most major competitors miter saws. Adjustable out feed -up to 12 inch in height
• DURABLE: Equipped with adjustable leveling feet for stability and durability on uneven surfaces. Material - Steel

User questions & answers

Question:	can it be wheeled though a standard size door with saw on
Answer:	Thank you for your question. The T4B will fit through a standard size door. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499).
Question:	Are extra mounting brackets available? If so, where? I would like to use this stand with multiple saws
Answer:	1609B02007 is the bosch part number for the brackets. Amazon has them if you search the number, however as of this posting they are on the order of $10 cheaper direct from bosch. Can't say how shipping/handling/tax compares.
Question:	Do the ends of the support arms flip up to act as a stop when I want to cut several pieces the same length
Answer:	The end pieces move up and they can be used as stops, but I find they are a bit "wiggly" and seem cheaply constructed. I do not rely totally on them for stops; I clamp a piece of wood to the arm and make it as firm as possible. Maybe the one I got is not as well built as the ones used by the authors of the other two answers.
Question:	Would the Hitachi C12RSH 15 Amp 12-Inch Sliding Compound Miter Saw with Laser fit this stand
Answer:	Trini, I would believe John Cottingham's review, since he has one. The mounting system is very accomodating. The saw only needs four bolt holes in its base. The mounting bars on the stand can be placed anywhere along the center rail to accomodate the width of the saw base and the length of the bars can handle most depths of the saw since the attachments are in slotted holes. The rear mounting holes also have some play sideways so the rails can handle a saw that has different spacings of the rear and front bolt holes. I have a 12" DeWalt saw and this stand makes hauling it around real sweet. Also, setup for operation is really quick. The laser guide should not be an issue.

Product features

Added Precision and Peformance for your Benchtop Tools

Bosch benchtop tools provide the precision and performance your projects require. Durable quality is not only in every tool, but the trust you have in Bosch benchtop tools. The integrated out feed and supports holds up to 18 ft of material. The universal mounting system allows for use with all major competitors' saws. Equipped with an adjustable telescoping levelling leg to provide stability on uneven surfaces.

Features

• Integrated out feed and supports — up to 18 Ft. of material support capacity
• Adjustable telescoping levelling leg — provides stability on uneven surfaces
• Adjustable height out feed
• Universal mounting system — for use with all major competitors' saws
• Integrated rubber wheels — easily move stand with saw attached from jobsite to jobsite
• Adjustable height out feed

Product description

The new Bosch VAC090S dust extractor offers a best in class combination of air flow and suction power, which makes this vacuum ideally for dust extraction applications. With productivity enhancing features like automatic filter cleaning, power tool activation, L-BOXX compatibility and a 9-gallon canister, the VAC090S dust extractor is the tool of choice for contractors who need to collect a lot of dust and debris. The semi-automatic filter cleaning system, when activated, cleans filter on demand through a remote activation button. For decreased set-up time and fewer extension cords on the jobsite, the VAC090S offers a power tool activation feature that allows a power tool to be plugged into the vacuum and act as the on and off switch, while the Power Broker dial optimizes usage of the available power and helps avoid blown circuits. To protect the motor, the wet vacuuming water level sensor automatically shuts down vacuum when water reaches a maximum height. To meet the needs of the modern day contractor who may use this unit for multiple applications, the VAC090S is HEPA Ready. When used with a HEPA filter (accessory VF120H - Not Included), the VAC090S meets the EPA criteria of a HEPA Vacuum and can be used in RRP applications. The Bosch VAC090S is equipped with hose wrap hooks to securely manage the hose, heavy duty rubber wheels with plastic hubs, a locking castor and L-BOXX compatibility, all of which make this more than just a typical dust extraction unit. The Bosch VAC090S 9-Gallon Dust Extractor with Semi-Auto Filter Clean unit also includes: VH1035 10-Foot Hose, VB000P Plastic Bag, VF100 Filter, Power Tool Hose Adapter, Anti-Static Bend Nozzle and Semi-Automatic Filter Cleaning Actuating Nozzle.

• Semi-Automatic Filter Cleaning: Cleans filter on demand through remote activation button
• L-BOXX Integration: Instantly creates a mobile workstation
• Power Tool Activation: Allows power tool's switch to turn vacuum on and off
• Power Broker Dial: Optimizes usage of the available power and helps avoid blown circuits
• Wet vacuuming water level sensor: Automatically shuts down vacuum when water reaches a maximum height to protect motor

User questions & answers

Question:	Can this vac be attached directly to bosch table saw gts1031 and mitter saw gcm12sd
Answer:	Thank you for your question. The VAC090S will connect to the GTS1031 Table saw with the required VAC004 adapter and the VAC020 adapter for the GCM12SD Miter saw. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499).
Question:	Does this connect to the bosch 1250devs 6" random orbital sander
Answer:	Thank you for your question. Yes, the 1250DEVS will connect to the VAC090S vacuum. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)
Question:	I own this and getting static shocks when I use the 'wand kit' in my garage, anyone else experience this? anti-static hose
Answer:	Thank you for your question. There are many variables that can contribute to static such as if there is a low humidity level/dry environment, especially if using with drywall dust or sawdust. To avoid static shocks we would recommend using an antistatic hose like the Bosch VH1635A. http://www.amazon.com/Bosch-VH1635A-16-Feet-Anti-Static-Extractor/dp/B00HUCUMIG
Question:	What is the Db on this unit
Answer:	Thank you for your question. All the Bosch VAC series vacuums have a 71 db rating. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499).

Product features

WHAT IS CRYSTALLINE SILICA?

Silica, often referred to as quartz, is a very common mineral. It is found in many materials common on construction sites, including soil, sand, concrete, masonry, rock, granite, and landscaping materials. The dust created by cutting, grinding, drilling or otherwise disturbing these materials can contain crystalline silica particles. These dust particles are very small and invisible to the naked eye. When inhaled, even in very small amounts, silica dust can cause serious health hazards. Each exposure to silica adds to the lung damage.

WHAT IS SILICOSIS?

Silicosis is a disabling, irreversible, and sometimes fatal lung disease. When a worker inhales crystalline silica, the lungs react by developing hard nodules and scarring around the trapped silica particles. If the nodules become too large, breathing becomes difficult and death can result. There is no cure for this disease, but it is 100% preventable.

GET COMPLIANT

Whether you are concerned about the health of your employees, your health, compliance or increasing productivity, Bosch has developed PRO+GUARD protection systems. In order to move toward compliancy and protection, it is critical that every component in the system is designed to effectively remove dust. Bosch dust collection systems can reduce airborne dust, helping to create a safer and healthier working environment.

PROTECT YOURSELF & OTHERS

The Occupational Safety and Health Administration (OSHA) has issued a final rule to curb lung cancer, silicosis, chronic obstructive pulmonary disease and kidney disease in Americaʼs workers by limiting their exposure to respirable crystalline silica. While using power tools with a dust attachment/ accessory and dust extractors with the right filter, exposure to silica can be drastically reduced. The new standard went into effect on June 23, 2016, and employers are required to comply with all obligations of the standard by June 23, 2017.

Product description

The new Bosch VAC090A dust extractor offers a best in class combination of air flow and suction power, which makes this vacuum ideally for dust extraction applications. With productivity enhancing features like automatic filter cleaning, power tool activation, L-BOXX compatibility and a 9-gallon canister, the VAC090A dust extractor is the tool of choice for contractors who need to collect a lot of dust and debris. The automatic filter cleaning system, when activated, cleans the filters every 15 seconds to ensure optimal suction power. For decreased set-up time and fewer extension cords on the jobsite, the VAC090A offers a power tool activation feature that allows a power tool to be plugged into the vacuum and act as the on and off switch, while the Power Broker dial optimizes usage of the available power and helps avoid blown circuits. To protect the motor, the wet vacuuming water level sensor automatically shuts down vacuum when water reaches a maximum height. To meet the needs of the modern day contractor who may use this unit for multiple applications, the VAC090A is HEPA Ready. When used with a HEPA filter (accessory VF120H - Not Included), the VAC090A meets the EPA criteria of a HEPA Vacuum and can be used in RRP applications. The Bosch VAC090A is equipped with hose wrap hooks to securely manage the hose, heavy duty rubber wheels with plastic hubs, a locking castor and L-BOXX compatibility, all of which make this more than just a typical dust extraction unit. The Bosch VAC090A 9-Gallon Dust Extractor with Auto Filter Clean unit also includes: VH1035 10-Foot Hose, VB000P Plastic Bag, VF100 Filter, Power Tool Hose Adapter and Anti-Static Bend Nozzle.

• Automatic Filter Cleaning: Cleans filter every 15 seconds to maintain maximum suction power
• L-BOXX Integration: Instantly creates a mobile workstation
• Power Tool Activation: Allows power tool's switch to turn vacuum on and off
• Power Broker Dial: Optimizes usage of the available power and helps avoid blown circuits
• Wet vacuuming water level sensor: Automatically shuts down vacuum when water reaches a maximum height to protect motor

User questions & answers

Question:	Will this fit the bosch 12” mitre saw dust port
Answer:	Yes the soft adapter plugs right in. I use it with my 12" glide saw and love it. You can plug saw directly into vac and it starts only when you start saw. Its great!!
Question:	Is there a warranty
Answer:	Robert Bosch Tool Corporation ("Seller") warrants to the original purchaser only, that all BOSCH portable and benchtop power tools will be free from defects in material or workmanship for a period of one year from date of purchase. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499).
Question:	What country is this dust extractor made in? Germany? Switzerland
Answer:	This dust extractor is manufactured in Germany.
Question:	I plan on using the fleece bag. How will I know when it is full and needs replacing
Answer:	Thank you for your question. The fleece bag will need replaced once it reaches capacity, you will know this happens when you have a reduction of suction power. Frequency of replacement will depend on the application. For example when grinding you could go through 1 bag every three days depending on the work load. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from M-F 7a-7p CST.

Product features

WHAT IS CRYSTALLINE SILICA?

Silica, often referred to as quartz, is a very common mineral. It is found in many materials common on construction sites, including soil, sand, concrete, masonry, rock, granite, and landscaping materials. The dust created by cutting, grinding, drilling or otherwise disturbing these materials can contain crystalline silica particles. These dust particles are very small and invisible to the naked eye. When inhaled, even in very small amounts, silica dust can cause serious health hazards. Each exposure to silica adds to the lung damage.

WHAT IS SILICOSIS?

Silicosis is a disabling, irreversible, and sometimes fatal lung disease. When a worker inhales crystalline silica, the lungs react by developing hard nodules and scarring around the trapped silica particles. If the nodules become too large, breathing becomes difficult and death can result. There is no cure for this disease, but it is 100% preventable.

GET COMPLIANT

Whether you are concerned about the health of your employees, your health, compliance or increasing productivity, Bosch has developed PRO+GUARD protection systems. In order to move toward compliancy and protection, it is critical that every component in the system is designed to effectively remove dust. Bosch dust collection systems can reduce airborne dust, helping to create a safer and healthier working environment.

PROTECT YOURSELF & OTHERS

The Occupational Safety and Health Administration (OSHA) has issued a final rule to curb lung cancer, silicosis, chronic obstructive pulmonary disease and kidney disease in Americaʼs workers by limiting their exposure to respirable crystalline silica. While using power tools with a dust attachment/ accessory and dust extractors with the right filter, exposure to silica can be drastically reduced. The new standard went into effect on June 23, 2016, and employers are required to comply with all obligations of the standard by June 23, 2017.

Product description

The Dremel Lite is a handheld, cordless rotary tool designed for beginners to tackle a variety of household and craft projects. With up to 25, 000 RPM of rechargeable power, The Dremel Lite is an approachable and versatile solution to make projects like sanding wood or engraving metal Easy. This lightweight and comfortable tool is fully compatible with Dremel’s entire line of accessories, making it a must-have for busy homeowners and new DIYers.

• Multipurpose rotary tool – From woodworking, carpentry, car care to jewelry making and more; The versatile 7760 Lite is the diyer’s go-to solution for small home improvement jobs, and crafting projects. Includes 10 accessories to kick start your projects right out of the box.
• Quick accessory changes – With the patented EZ twist nose cap, accessory changes are easy and done without the need of a wrench. Collet size is 1.8”.
• Variable speed - Seamlessly adjust to the ideal speed from 8,000 to 25,000 for optimal control & maneuverability
• Easy battery charging - The rechargeable 4V li-ion battery & convenient USB charger ensures that it’s ready whenever you are.
• Battery life indicator - LED light illuminates to notify you when the battery needs to be charged
• Portable & lightweight - 360 degree soft grip material allows for comfort & precise control. Cordless design offers the freedom to take it anywhere
• Compatible - Can be used with most Dremel accessories and a selection of attachments
• What’s in the kit - 7760 Lite 4V Li-on cordless rotary tool, 10 piece accessories, accessory case, USB charging cable & power adaptor, user manual, quick start guide, 2 year warranty card

Product features

Tackle light-duty home improvement, crafting & DIY projects with ease.

Designed with beginners in mind, the Dremel Lite is a user-friendly solution for a wide range of projects. A handheld cordless rotary tool, the Lite features 8,000-25,000 RPM of rechargeable power. The four different speed settings offer better control for different applications, plus the lightweight design and soft grip make it easy and comfortable to use. Powered by an efficient USB system that holds its charge, the Lite is a must-have for homeowners and DIYers.

Ideal for Metals, Stone, Shell, Glass & Ceramic

Kit includes #414 & #429 felt wheels, can be used with included #421 polishing compound.

Ideal for Soft & Hard Material, or Plastics

Kit includes #403 nylon bristle brush. Can be used with included #421 polishing compound.

Ideal for Soft or Hard Wood/Metal, Stone or Glass

Kit includes #106 1/16" engraving cutter, great for detail engraving.

Ideal for Soft & Hard Wood or Metal

Kit includes #407 60 grit sanding band & mandrel, great for rough shaping & sanding

Ideal for Soft & Hard Metals, Stone, Glass

Kit includes #952 3/8" grinding stone, great for sharpening, deburring, & general purpose shaping.

Product description

The screwdriver set from the Bosch Professional hand tool range. Made for the toughest applications – not just for screwing. Extremely robust with universal blade made from chromium-vanadium steel and solid steel cap. Can therefore be used for chiselling. Comes with hard tip for enhanced durability. For seized screws, the integrated metal hexagon head socket, combined with an open-ended or ring spanner, ensure the high possible torques. All screwdrivers have a particularly ergonomic design and rubber-coated grip surfaces to make work particularly comfortable. This largely prevents blisters and calluses. The special shape of the handle stops the screwdriver from rolling away at the workstation. The packaging is particularly practical: The integrated plastic tray is compatible with the Bosch L-Boxx mobility system and can be used as a half inlay in any Bosch L-Boxx tool box.

• The six-part screwdriver set from the hand tool range ideal for screwdriving, chiselling and loosening seized screws
• Extremely robust thanks to universal stainless steel blade, solid steel cap and hardened tip
• Highest possible torques due to integrated hexagon head socket for open-ended spanners
• Suitable handling thanks to ergonomic design and soft-grip zone
• Items included: 2 x PH 125 mm, 1 x PH 100 mm, 1 x SL6.5 125 mm, 1 x SL5.5 100 mm, 1 x SL4.5 100 mm, 1 x SL3.5 75 mm, plastic half inlay for L-Boxx, box

User questions & answers

Question:	are these magnetized
Answer:	No.
Question:	Where is it made
Answer:	It is made in China.

Product features

Long lifetime

Our screwdrivers have a robust metal shank, guaranteeing a long service life.

Ergonomic shape

The screwdrivers are particularly ergonomic and have softgrip surfaces to make work especially comfortable.

Extremely robust cap

The metal cap makes the screwdriver extremely durable and suitable for use with a hammer.

Product description

The Bosch 4100XC-10 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand delivers both professional rip capacity and outstanding portability for a tool that can get the job done, wherever it is. The powerful 15-Amp saw delivers 4. 0 max HP for outstanding productivity. It also incorporates soft-start circuitry for smooth but quick ramp-up to the operating speed. It includes Constant Response circuitry to help maintain speed under load, restart protection to avoid accidental startup and overload protection. The SquareLock rip fence is engineered for maximum trueness and great ease-of-use. It includes an enhanced auxiliary fence for narrow workpieces. The lighter GTA47W Gravity-Rise Wheeled Stand has 8 In. treaded rubber-composite tires and a single-action design for easy set-up and transport. It is jobsite-ready with heavy-duty construction. The Smart Guard System features a three-position adjustable riving knife, anti-kickback pawls and non-obstructed-view barrier guard assembly. The table saw provides a 30 In. x 22-1/2 In. tabletop with a 30 In. rip capacity for ripping 4 Ft. wide sheets goods in half.

• Powerful table saw – has 15-Amp saw with 4. 0 max HP and 3, 650 rpm, for rip-cutting and cross-cutting of fine and rough materials
• Dimensions: 32.5" D x 27" L x 13" H | Product Weight: 94 lb
• Saves space: Large cast aluminum top provides increased work space and material support with a 25 inch. Ripping capacity to cover all typical job site rip cutting widths
• Portability: Works seamlessly with the included lighter GTA47W gravity rise wheeled stand for easy job site mobility, with single action setup and take down
• Protection: Smart guard system contains riving knife and Anti Kickback pawls provide protection, while the guard assembly provides a barrier to help prevent blade contact while allowing an unobstructed view of the cut
• Soft start circuitry: Manages the intensity of motor start up and minimizes the possibility of tripping a circuit breaker

User questions & answers

Question:	will this connect to the festool 27mm dust collector
Answer:	Don't know that item, but the exhaust/dust port on the Bosch mikes out @ 2.50" OD and 2.25" ID; so, w 27 mm close to 1.06"...likely not And FYI, bought the official Bosch dust collection bag which does a poor job...I use my VacMaster hose- the outer nozzle plugs snugly into the Bosch port's ID and picks up 80-90 % of the wood dust generated...as long as I remember to turn the vacuum on..which I sometimes don't ...love this table saw
Question:	Can a dado blade be used in this saw
Answer:	Yes, the 4100XC-10 table saw can dado cut by using TS1007 dado insert. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	is this saw equipped with the Reaxx system
Answer:	No
Question:	how tall is this saw/stand when folded / stored
Answer:	The table height from floor is 32.5". Its dimension is 27in x 32.5in x 13in. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Product features

BOSCH 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand 4100XC-10

The Bosch 4100XC-10 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand delivers both professional rip capacity and outstanding portability for a tool that can get the job done, wherever it is. The powerful 15-Amp saw delivers 4.0 max HP for outstanding productivity. It also incorporates soft-start circuitry for smooth but quick ramp-up to the operating speed. It includes Constant Response circuitry to help maintain speed under load, restart protection to avoid accidental startup and overload protection. The SquareLock rip fence is engineered for maximum trueness and great ease-of-use. It includes an enhanced auxiliary fence for narrow workpieces. The lighter GTA47W Gravity-Rise Wheeled Stand has 8 In. treaded rubber-composite tires and a single-action design for easy set-up and transport. It is jobsite-ready with heavy-duty construction. The table saw provides a 30 In. x 22-1/2 In. tabletop with a 30 In. rip capacity for ripping 4 Ft. wide sheets goods in half.

Features

• Powerful table saw – has 15-Amp saw with 4.0 max HP and 3,650 rpm, for rip-cutting and cross-cutting of fine and rough materials
• Large cast aluminum top – provides increased work space and material support with a 30 In. ripping capacity
• Soft-start circuitry – manages intensity of motor start-up and minimizes the likelihood possibility of tripping a circuit breaker
• Constant Response circuitry – helps maintain speed under load
• Restart protection – helps to avoid accidental startup
• Portability – works seamlessly with the included lighter GTA47W Gravity-Rise Wheeled Stand for easy jobsite mobility, with single-action setup and take down
• SquareLock rip fence – engineered for enhanced clamping and trueness
• Smart Guard System – riving knife and anti-kickback pawls provide protection, while the guard assembly provides a barrier to help prevent blade contact while allowing an unobstructed view of the cut
• Onboard storage – allows for access to all included components

Product description

The Bosch RA1141 Benchtop Router Table delivers ease of use plus stability, featuring an easy click router mount that attaches and detaches in seconds, with no leveling required. It has a smooth laminated MDF top, plus it has adjustable laminated MDF face plates for better support. The tall fence handles taller stock, and dual feather boards provide additional control while feeding stock across the table. There’s a bit-height gauge for easier bit setup and enhanced cut precision. With an easy-to-store folding design, this preassembled table has folding legs with storage compartments for convenience and portability. When routing curved work pieces, the starter pin and guard help support the work piece to allow easier control.

• Ultra-portable design – Features folding legs for fast setup and easy storage
• Easy click router mounting system – Provides easy bit changes and no leveling
• Laminated MDF top – Helps users make smooth and precise cuts
• Onboard storage – Ideal for holding router bits and spare parts
• No assembly required – Comes preassembled
• Tall fence with two adjustable feather boards – Helps to provide extra control and guide work
• Starter pin and guard – Allows easier control for routing curved work pieces
• Bistro-height gauge – Provides easier bit setup and enhanced cut precision

User questions & answers

Question:	Is the router included
Answer:	Router is not included
Question:	Its the same has a skil ras900, but with different color, any difference in quality ?i though bosh made stuff and not buy from seller and slap names
Answer:	I have the Skil 900 Router table along with the Skill Router. I had to purchase a new router ecosystem because my Skil Router would no longer hold it's depth settings. so I purchased the Bosch 1617 EVSPK Router Combo Kit and the Bosch Router Table RA1181with an additional Fixed base. When I was taking the Skil router table down I noticed a label on it which said Robert Bosch Company. My skil table quick release wasn't compatible with the Bosch Fixed base otherwise I probably would have used my Skil Router Table. I will say the Bosch Router table 1181 is much nicer. The MDF platform was ok except dust go in on the plastic edges and the edges separated from the table slightly. I'm a very light DIY type of person. If my Skil Router had a more robust/accurate depth guide I probably would still be using it.
Question:	I can see there is an on/off button on the table, do i have to stick with same electricity voltage of the router
Answer:	Yes, the router is designed to work with 120v, the router table has a on off switch which will need to be plug into a 110 outlet, when the router is inserted into the table , it is plugged into the outlet on the table, using voltage greater than 120v will burnout the brushes in your router.
Question:	The mounting plate is different as ra1181 or ra1171. i guess this item is for bosch only, right
Answer:	Hi! The Bosch RA1141 Portable Benchtop Router Table is compatible with the following routers: Bosch 1617-Series Routers (in fixed base only), Craftsman 17508, 17511, 17528, 17533, 17541, 17542, 26620, 26834, 28190, and 73277 Routers, DeWalt DW616 and DW618 Routers (in fixed base only), Hitachi M12VC Routers, Makita RF1100 and RF1101 Routers, Milwaukee 5615 and 5616 Routers, Porter-Cable 690-Series and 892-895-Series Routers (in fixed bases only) and 7529 Plunge Router, Ryobi R163K Router, and Skil 1810, 1815, 1820 and 1825 Routers. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Product features

Bosch RA1141 Portable Jobsite Router Table

The Bosch RA1141 Portable Jobsite Router Table delivers ease of use plus stability, featuring an Easy Click router mount that attaches and detaches in seconds, with no leveling required. It has a smooth laminated MDF top, plus it has adjustable laminated MDF face plates for better support. The tall fence handles taller stock, and dual feather boards provide additional control while feeding stock across the table. There’s a bit-height gauge for easier bit setup and enhanced cut precision. With an easy-to-store folding design, this preassembled table has folding legs with storage compartments for convenience and portability. When routing curved workpieces, the starter pin and guard help support the workpiece to allow easier control.

Ultra Portable Design

With folding legs for fast set up and easy storage.

Easy Click

Router mounting system for fast and easy set up. Also allows for no leveling and easy bit adjustments.

Laminated MDF Top

For smooth and precise cuts.

Onboard Storage

Perfect for holding router bits and spare parts.

Product description

The new Bosch GTA500 is exclusively designed for use with the Bosch GTS1031 Table saw. Featuring a solid and durable All steel design, Solid center of gravity for maximum performance. Its tool free functionality allows the attach and detach saw in seconds and its light weight of 14 lbs. Makes it easy to carry.

From the Manufacturer

The Bosch GTA500 Tool-free Folding Table Saw Stand is a perfect accessory to accompany your GTS1031 10 in. Portable Jobsite Table Saw. The stand features a tool-free Functionality - Attach and detach saw in seconds, without tools. All-steel design, solid center of gravity for maximum performance.

• Exclusive compatibility with GTS1031
• Attach and detach saw stand in seconds, without tools
• Folds flat for convenient for transport and storage
• Solid and durable – all-steel design with solid center of gravity for maximum performance
• Light weight – weighs only 14 pounds and can be easily carried one-handed

User questions & answers

Question:	What are the dimensions of the stand when it is folded
Answer:	I needed to of the same horses and I got one of each So that's why I don't want em no more
Question:	Does this work for the Bosch 4000 10" table saw
Answer:	They are 28 3/4 tall, 41 1/2 wide
Question:	I usually buy bosch but i got a dewalt dw745 table saw. now they've discontinued the stand for it. anybody know if this will work with it
Answer:	i don't know about this one it is from i difference supply the one i bought is below and it stated 2pack 2-Pack TOUGHBUILT C550 41.5-Inch Steel Folding Portable Heavy Duty Sawhorse Jobsite Table
Question:	What height is the top of the GTS 1031 while it is on this stand
Answer:	March 2021 The Home Depot price is exactly the same as Amazon. They sell this product individually, NOT a two pack, unless you buy 2 @ $35 each. $70 plus tax for a pair.

Product features

Bosch GTA500 Folding Stand for 10-Inch Portable Jobsite Table Saw

The new Bosch GTA500 is exclusively designed for use with the Bosch GTS1031 table saw. Featuring a solid and durable all steel design, solid center of gravity for maximum performance. Its tool free functionality allows the attach and detach saw in seconds and its light weight of 14 Lbs. makes it easy to carry.

Product description

Includes 2610928164 Sub Base. New, Bulk Packed. Genuine OEM replacement part. Consult owners manual for proper part number identification and proper installation. Compatible with: Bosch models : 1617 (0601617161) Router, 1617EVS (0601617739) Router, 1617 (0601617039) Shop Router, 1618 (0601618039) Shop Router, 1618EVS (0601618739) Shop Router, 16181 (0601618139) 2HP Router Motor, 16186 (0601618639) 2.25HP Router Motor

• Includes 2610928164 Sub Base
• New, Bulk Packed
• Genuine Bosch Replacement Part
• Consult owners manual for proper part number identification and proper installation
• Please refer to list for compatibility

User questions & answers

Question:	Does bolts come with this
Answer:	Mine did not. I think it cost me about 60 cents at a local hardware store. Bring your router base and the base plate to get a perfect fit.

Product description

Includes 2610950101 Glide Pads. New, Bulk Packed. Genuine OEM replacement part. Consult owners manual for proper part number identification and proper installation. Compatible with: Bosch models: 4100 (0601B13010) Table Saw, 4100DG-09 (0601B13010) 10" Worksite Table Saw, 4100DG-09 (3601L13010) 10" Worksite Table Saw, 4100-09 (0601B13010) 10" Worksite Table Saw, 4100-09 (3601L13010) 10" Worksite Table Saw

• Sold on Amazon

User questions & answers

Question:	Will these fit the Bosch 4000 table saw fence
Answer:	This is a terrible saw. If you can actually get a blade in it you might be able to cut something. Shakes like crazy.
Question:	Are screws included with the set
Answer:	No.
Question:	Is it really 6 x 8 inches or 0,6 x 0,8 inches
Answer:	Slide the bead on something like a toothpick. Put a dab of glue on each end to prevent to the bead from moving around. Cut
Question:	Will these fit the TS 3000 model table saw
Answer:	I USE REGULAR JEWELERS SAW BLADES AVAILABLE IN MANY SIZES THE SAW USES 6" PLAIN END JIG SAW BLADES.