10 best porter cable dovetail jigs

Product description

Amazon.com Ideal for woodworking, furniture and cabinet making, the Porter Cable 4216 12-inch dovetail jig kit enables cutting a wide variety of joinery for drawers, boxes, and furniture. This package includes a template 4211 for half-blind, rabbeted half-blind and sliding dovetails, the 4213 template for through dovetails and box joints, and the 4215 template for miniature through, miniature half-blind dovetails, and miniature box joints. Durable, single-piece steel base design requires no assembly (view larger). Able to accommodate stock from 1/4 to 1-1/8 inches thick, this jig's heavy-duty cam-type clamps with sandpaper-backed locking bars provide a firm grip of wood. On-board instructions provide clear user guidance for the various applications and machined aluminum templates provide superior cutting accuracy and long-term durability. Its router bit depth gauge allows users to set bit depths without measuring and its durable, single-piece steel base design requires no assembly and allows clamping or bolting directly to the work bench. Warranty This Porter-Cable tool is backed by three-year limited warranty covering any defects due to faulty materials or workmanship (from the date of purchase). It's also covered by Porter-Cable's one-year free service contract, where Porter-Cable will maintain the tool and replace worn parts caused by normal use--for free. What's in the Box Porter-Cable 4216 deluxe dovetail jig combination kit with jig base; three templates (4211, 4213, and 4215); four router bits (43776PC, 43743PC, 43014PC, and 43777PC); four template guides (42037, 42040, 42046, and 42054); two lock nuts; wrench; operating instructions On-board instructions provide clear guidance for various applications (router not included; view larger). 4216 Deluxe Dovetail Jig Combination Kit At a Glance: Includes 12-inch dovetail jig plus three templates Template alignment lines and router bit depth gauges allow for quick,

Ideal for woodworking, furniture and cabinet making, the Porter Cable 4216 12-inch dovetail jig kit enables cutting a wide variety of joinery for drawers, boxes, and furniture. This package includes a template 4211 for half-blind, rabbeted half-blind and sliding dovetails, the 4213 template for through dovetails and box joints, and the 4215 template for miniature through, miniature half-blind dovetails, and miniature box joints.

Durable, single-piece steel base design requires no assembly (view larger).

Able to accommodate stock from 1/4 to 1-1/8 inches thick, this jig's heavy-duty cam-type clamps with sandpaper-backed locking bars provide a firm grip of wood. On-board instructions provide clear user guidance for the various applications and machined aluminum templates provide superior cutting accuracy and long-term durability. Its router bit depth gauge allows users to set bit depths without measuring and its durable, single-piece steel base design requires no assembly and allows clamping or bolting directly to the work bench.

Warranty

This Porter-Cable tool is backed by three-year limited warranty covering any defects due to faulty materials or workmanship (from the date of purchase). It's also covered by Porter-Cable's one-year free service contract, where Porter-Cable will maintain the tool and replace worn parts caused by normal use--for free.

What's in the Box

Porter-Cable 4216 deluxe dovetail jig combination kit with jig base; three templates (4211, 4213, and 4215); four router bits (43776PC, 43743PC, 43014PC, and 43777PC); four template guides (42037, 42040, 42046, and 42054); two lock nuts; wrench; operating instructions

From the Manufacturer

Ideal for woodworking, furniture and cabinet making, the Porter Cable 4216 12-inch dovetail jig kit enables cutting a wide variety of joinery for drawers, boxes, and furniture in stock from -1/4 to 1-1/8 inches thick with a router (sold separately). The kit includes a template 4211 for half-blind, rabbeted half-blind and sliding dovetails, the 4213 template for through dovetails and box joints, and the 4215 template for miniature through, miniature half-blind dovetails, and miniature box joints. The unit's template alignment lines and intuitive router bit depth setting gauges deliver industry leading ease of set-up and enable depth settings without measurements. On-board instructions provide clear guidance while machined aluminum template provides superior cutting accuracy and long term durability. All bit needed to make joinery above are included. Ninety-day money back guarantee, 3 year limited warranty, 1 year free service contract.

• Includes template 4211 for half-blind, rabbeted half-blind and sliding dovetails
• Includes template 4213 for through dovetails and box joints
• Includes template 4215 for miniature through and half-blind dovetails, and miniature box joints
• Template alignment lines and router bit depth gauges allow for quick, easy set-up; Router bit depth gauges allow user to quickly and accurately set the depth without taking measurements
• Included with jig: templates, two lock nuts, wrench, and instruction manual. Machined aluminum template provides superior cutting accuracy and long term durability

User questions & answers

Question:	What width of boards will fit in this jig, and what is the max thickness of boards that can fit in it? Will it handle 4/4 stock
Answer:	Hi Derek, I have not seen a way to bevel the cut to match the door bevel. The jig mounts square to the door. I have had the same question myself early on. It seems to be ok though, because the lockset hardware doesn't bevel either, the plunger plates are square to the door and do not follow the door bevel. We have not had an issue with the 5 degree or so bevel on the door looking bad or functioning badly. Hope this helps.
Question:	Does it contain the essential guide rings
Answer:	There is a mortise template for a 5/8" x 4-1/4" lockset included. The faceplate templates are for 7/8" or 1" wide faceplates. There is no template for 11/16" faceplate included with the kit. The Trend Lock website (www.trenddirectuk.com) lists other available templates.
Question:	Can you use it with the Bosch router or do you need special accessories
Answer:	Yes the template pivots to match the bevel Not real familiar with Baldwin products as I own a commercial door company and I have never seen a beveled faceplate it is the door that is beveled in my experience
Question:	does it include the 4 router bits usually included with in this set
Answer:	I don’t see that size listed. The closest to that size is 22.5mm x 152.5mm. Not sure if you are referring to the faceplate size or the actual lock body. This jig has the capability to be used with a deep plunging router to mill out lock-sets that fit deep into the door. There are templates that are used to deep cut for the lock body and other templates that are used to mortise out the face plate for such a lock set

Product features

PORTER-CABLE 4216 Super Jig

Ideal for woodworking, furniture, and cabinet making. Dovetail Jig Combination Kit enables cutting a wide variety of joinery for drawers, boxes, and furniture. Durable, single-piece steel base design requires no assembly. Accommodates stock from 1/4 to 1-1/8 in. thick, this jig's heavy-duty cam-type clamps with sandpaper-backed locking bars provide a firm grip of wood. Onboard instructions provide clear user guidance for the various applications and machined aluminum templates provide superior cutting accuracy and long-term durability. Its router bit depth gauge allows users to set bit depths without measuring, and its durable, single-piece steel base design requires no assembly. Clamps or bolts directly to the work bench.

Features

• Heavy-duty cam-type clamps with sandpaper-backed locking bars provide firm grip of wood U
• Seful for half-blind, rabbeted half-blind and sliding dovetails
• Includes template 4213 for through dovetails and box joints
• Includes template 4215 for miniature through and half-blind dovetails, and miniature box joints

Product description

Amazon.com Those who work with the 4210 rave about the user-friendly features. The jig's patented alignment lines and router bit depth stop simplifies set-up and gets you up and running in no time. This versatile jig accepts stock from 1/4 to 1-1/8 inch in thickness and up to 12 inches in width. Built with endurance in mind with its 1/8-inch a thick steel base, this jig includes ultra-durable CNC-machined aluminum templates for creating half-blind dovetails, dovetail dadoes, box joints, and miniature dovetails. The Porter-Cable 4210 includes a carbide-tipped dovetail bit, template guide, lock nut, and a easy-to-follow manual.

Those who work with the 4210 rave about the user-friendly features. The jig's patented alignment lines and router bit depth stop simplifies set-up and gets you up and running in no time. This versatile jig accepts stock from 1/4 to 1-1/8 inch in thickness and up to 12 inches in width. Built with endurance in mind with its 1/8-inch a thick steel base, this jig includes ultra-durable CNC-machined aluminum templates for creating half-blind dovetails, dovetail dadoes, box joints, and miniature dovetails. The Porter-Cable 4210 includes a carbide-tipped dovetail bit, template guide, lock nut, and a easy-to-follow manual.

From the Manufacturer

Ideal for woodworking, furniture and cabinet making, the Porter Cable 4210 12-inch dovetail jig kit enables cutting a wide variety of joinery for drawers, boxes, and furniture in stock from 1/4 to 1-1/8 inches thick with a router (sold separately). The kit includes a template 4211 for half-blind, rabbeted half-blind, and sliding dovetails. The unit’s template alignment lines and intuitive router bit depth setting gauges deliver industry leading ease of set-up and enable depth settings without measurements. On-board instructions provide clear guidance while machined aluminum template provides superior cutting accuracy and long term durability. All bit needed to make joinery above are included. Ninety-day money back guarantee, 3 year limited warranty, 1 year free service contract.

• Includes 4211 template for half-blind, rabbeted half-blind and sliding dovetails
• Template alignment lines and router bit depth gauges allow for quick, easy set-up.Heavy-duty cam-type clamps with sandpaper-backed locking bars provide firm grip of wood
• Router bit depth gauges allow user to quickly and accurately set the depth without taking measurements
• Includes 4211 template for half-blind, rabbeted half-blind and sliding dovetails
• Template alignment lines and router bit depth gauges allow for quick, easy set-up
• Router bit depth gauges allow user to quickly and accurately set the depth without taking measurements
• On-board instructions provide clear user guidance for the various applications; Machined aluminum template provides superior cutting accuracy and long term durability
• 12-inch max stock width; 1-1/8-inch max stock thickness

User questions & answers

Question:	What is the minumum depth you can set the router bit for the dovetail. Would a 1/4 inch depth be sufficient stability
Answer:	Micro Jig MB-050-0514 is 1/2" shank. Micro Jig MB-025-0514 is 1/4" shank.
Question:	I am getting a Festool 1010 EQ Router for Christmas. I have a Model 4210 porter cable dovetail jig. i need to know what bushings and bits to buy
Answer:	Unless you are routing extremely hard wood, or have an under powered router, a single pass with the dovetail bit will work. Use plywood or MDF and you won’t have a problem.
Question:	Can I make 1/2” box joints w/ this set up? Without buying anything extra
Answer:	No but should be the same process
Question:	is the router bit 1/4 inch xhaft
Answer:	The shank is 1/2 inch.

Product features

The Ultimate Solution

Build drawers, cabinets and other DIY projects around home with ease with the PORTER-CABLE Dovetail Jig can join pieces of wood together without the use of wood glue or nails. This tool gives you the convenience of creating a flush joint during a pocket-hole assembly. By using this dovetail jig by PORTER-CABLE you will be able to experience durable construction to last for years.

For Professional Use

The PORTER-CABLE Dovetail Jig has various applications like repairing, making it a handy and necessary tool to own among your other hand and power tools. The versatile design is ideal for building indoor and outdoor projects, and for making household repairs.

Product description

Stanley Black & Decker is a world-leading provider of tools and storage, commercial electronic security and engineered fastening systems, with unique growth platforms and a track record of sustained profitable growth.

From the Manufacturer

Porter-Cable 4213 Through Box Templet

• Template kit for 4200 series dovetail jigs
• Replacement part for models 4212 and 4216; accessory for model 4210
• Enables through dovetails and box joints to be cut
• Template kit for 4200 series dovetail jigs
• Replacement part for models 4212 and 4216; accessory for model 4210
• Enables through dovetails and box joints to be cut
• Requires 1/2-inch straight bit (sold separately)

User questions & answers

Question:	is this the template KIT which includes the guide and bit? The description says the bit is sold separately
Answer:	No, we don't recommend using the same size. For best results always use 12x18 inch pillow covers for 12x20 inch pillow inserts.
Question:	Does the 4213 jig come with all the necessary hardware and brackets required
Answer:	Though it can be washed with cold low settings, we highly recommend not to do so. This is mainly because the outer polyester material is a nonwoven material.
Question:	Can you use a bearing guided bit with this template
Answer:	No..Its made in India
Question:	Is this template aluminum or steel
Answer:	Yes. We recommend using a pillow cover size smaller than that of the pillow inserts. For best results always use 14-inch pillow covers for 16-inch pillow inserts.

Product description

The Bosch 2.25 HP plunge and fixed-base router kit is a versatile kit for a broad range of applications, including precise bit plunging, edge forming, slot cutting, laminate trimming and dovetail cutting. You can also use it with a router table. The kit features a 25, 000 RPM, 12 amp motor that delivers the power needed for smooth routing. Case type: Hard plastic.

Handle a broad range of routing applications with the versatile Bosch 1617EVSPK Plunge and Fixed-Base Variable-Speed Router Kit. This router kit includes a powerful motor with advanced speed control technology, precision bases, and plenty of advanced features to help get a variety of jobs done quickly and accurately.

• Versatile: This versatile kit can be used for a broad range of applications, including precise bit plunging, edge forming, slot cutting, laminate trimming and dovetail cutting; Making it one of the most widely used routers for wood working
• Durability: Aluminum construction makes this one of our most durable wood routers yet with wooden handles on a fixed base and a soft grip handle on a plunge base
• Ease of use: Rounded hardwood handles maximize user control
• Convenient: With the built in constant response circuitry, our 1617EVSPK wood router will maintain a constant speed throughout the cut, so you get cleaner, more accurate results
• Kit contents: Includes a plunge base, fixed base, 1/4 inch and 1/2 inch collet chucks, shaft wrench, collet nut wrench, chip shields and carrying case

User questions & answers

Question:	Why buy this one over the Dewalt 2.25hp kit? The Dewalt is $40 more, and usually Bosch is more expensive than Dewalt
Answer:	Hi, Peter. Thank you for your question about GoodSense Tussin DM. This product does not contain alcohol. If you would like additional information, please let us know and we would be happy to further assist you.
Question:	I read in one of the reviews, (current review) this router comes with a kit including carrying case, circle jig and an edge guide. Is this correct
Answer:	Yes, it can be shipped anywhere -- I think.
Question:	Is this product compatible with the bosch router table
Answer:	It is a two pack
Question:	if i were to mount this to a table, does this router provide a height adjustment from above the router table
Answer:	it depends what your description of natural is. None the less its tastes like any typical cold syrup medicine although i would recommend to go with the cherry or berry flavor they work just as well with out the bad taste. The original flavor can be harsh especially for kids and young adults.

Product features

Bosch 12 Amp 2-1/4 Combination Horsepower Plunge and Fixed Base Variable Speed Router Kit 1617EVSPK with 1/4-Inch and 1/2-Inch Collets

Variable speed dial, soft-start, maintains constant speed under load, quick clamp system on both bases, includes fixed base with system for adjusting bit height from above a router table, precision centering makes it easy to keep bit on intended cutline when using jigs, templates, dovetail fixtures and similar guidance devices, fixed base has threaded holes for mounting to router table positioned in Bosch 4-hole pattern and common 3-hole pattern, microfine, bit, depth adjustment system on both bases, wide base openings and 2" sub-base openings and provides better visibility, right or left.

Top tier Power

Among the most powerful routers for woodworking at 12-amps, 2.25-horsepower, and 8,000-25,000 RPM. The wood router’s advanced speed-control technology monitors and maintains desired RPM for consistent performance.

Flexibility

The hand router’s variable speed dial allows you to set the optimal speed for the routing task and material. Base Diameter: 6 inches Fixed/ 6-11/16 inches. Rounded hardwood handles maximize user control.

Durable and Comfortable

The motor housing and bases are made of aluminum, and the power switch is completely dust-sealed for added durability. This router is backed by a one-year limited warranty, 30-day money-back guarantee, and one-year service protection plan.

Accurate

This versatile kit provides all the components necessary for fixed-depth routing. Microfine bit-depth adjustment on the base, with an overall range of one inch and accuracy to 1/64 inch, allows for accurate and fast changes.

Product description

Woodstock Dovetail Jig with Aluminum Template, 12in, D2796

• Router requires a 7/16-Inch Guide Bushing and 1/2-Inch 14-Degree Dovetail Router Bit with 1/2-Inch shank (sold seperately)
• Comes with a 1/2-Inch aluminum template
• Simple to set up, this sturdy, well-made jig makes 1/2-Inch half-blind dovetail joints, the hallmark of quality drawer construction

User questions & answers

Question:	It "looks" dead on exactly like the "harbor freight" one for 38.00 ?!?!?!?! russian parts american parts-all made in taiwan :) famous movie quote
Answer:	Not hard. Just push the Gripper up against the fence and down on your piece. Thenloosen thumb screws and let support drop down to table.
Question:	Can i make full dovetail joints with same bit
Answer:	Most people do not use a blade guard, so this would take the place of the blade guard. It is also used when a blade guard would interfere with the cut.
Question:	Is it possible that you can send me the owner manual by email on this item? I lost mine. Thanx, Gene
Answer:	One of the two legs of the GRR-RIPPER is just under 1/4” so out of the box it is fully capable of cutting 1/4” thick strips. We also sell an accessory 1/8” leg that allows for cutting strips down to 1/8” thick. Just remember that in either case, when cutting thin strips you want to use a Zero Clearance Insert to insure that your thin strip will not fall into the opening for the blade or the riving knife opening.
Question:	Can you cut full dovetail
Answer:	It really depends on what you will use it for. I bought the 100 and it worked fine. I then started to do some thin ripping and purchased the 1/8" leg. That's been helpful although I did cut into part of the leg. It was my fault for not keeping adequate pressure on the gripper against the fence. I then bought the piece that turned the 100 into the 200. All in all I paid too much because I was trying to save a couple of bucks. I did notice today that Amazon has the 200 with the 1/8" leg on Prime for $79. If i had to do it again, I'd go with that. Hope this helps.

Product features

Woodstock D2796 12-Inch Dovetail Jig w/Aluminum Template

Our Dovetail Jig with unique cam-action clamping system quickly locks two boards in position to cut both tails and pins with one pass of the router. This jig offers large, easily-adjustable knobs instead of the wing nuts found on other jigs and easily mounts to your benchtop.

12-Inch Width Capacity

This sturdy, well-made jig makes 1/2-inch half-blind dovetail joints, the hallmark of quality drawer construction. Easily handles stock from 1/2 to 1-1/4-inch thick in widths up to 12-inches. Heavy formed steel manufacturing ensures accuracy and durability.

In the Box

The Dovetail Jig includes a 1/2-inch aluminum template and complete instructions. Router requires a 7/16-inch guide bushing (model D3117) and 1/2-inch 14-degree Dovetail router bit with 1/4-inch shank (model DC1069 or similar) sold separately.

• ACCURATE CUTS: Make quick, accurate biscuit cuts for super-strong miter joints, T-joints, butt joints and edge-to-edge/corner joints with the 8.5 Amp 120V Biscuit Joiner from VonHaus
• PRE-SET DEPTH: Pre-set depth stops for biscuit sizes 0, 10 and 20 guarantees accuracy without measuring
• ADJUSTABLE FENCE: Adjustable fence allows the tool to be set on an angle for easily joining mitered pieces
• DUST COLLECTION: Includes a dust port with dust bag for easy clean-up and an unobstructed view when in use
• ERGONOMIC DESIGN: Large, ergonomically designed top grip handle for enhanced comfort. The VonHaus biscuit joiner comes with 1 x 4” blade, the biscuit joiner is also compatible with all biscuit joiner blades that is 100mm (4”) in diameter with a 22mm bore

User questions & answers

Question:	Are you able to adjust the height of blade
Answer:	The blade is fixed, you can adjust the guides so you can change the height on the wood you cut into
Question:	Dose this product come with 240v input voltage or is it auto voltage
Answer:	no doubt auto
Question:	Does it support 220V at 50HZ input voltage supply
Answer:	No
Question:	I replaced the cord with a 50amp range plug and it caught on fire anyone else have this issue
Answer:	That works fine you just have to make certain you only hook up either the red or the black wire (not both) along with the white wire. I use mine like this all the time but not with a range plug, just with the normal plug and not with 240 just 120.

Product description

PORTER-CABLE 430D4PC Omnijig Joinery System Dovetail Bit - D4; This bit is 1 of 7 dovetail bits that can be used with the Omnijig Joinery System®. For through, half-blind, and sliding-tapered dovetails. The angle is set to 7° to enable user to replicate traditional, hand cut dovetail joints. It has a 1/2" cutting diameter, Flute length of 25/32", Total bit length of 3-1/8", Carbide tipped, and 1/2" Shank.

• 1 of 7 dovetail bits used with the omnijig joinery system
• For through, half-blind, and sliding-tapered dovetails
• Angle set to 7 degree to enable user to replicate traditional, hand cut dovetail joints
• 1/2-inch cutting diameter
• Flute length 25/32-inch; total bit length 3-1/8-inch

User questions & answers

Question:	What is the shaft diameter
Answer:	nope. for 69038, just exist in navy pink and beige now. :)
Question:	Can this be used with a 1/4 inch trim router or does it require larger 1/2 inch router
Answer:	Yes it has a wire in the brim, but the hat can flatten to pack.
Question:	What are the true physical dimensions of this
Answer:	Amazon sent me an email to help out with this question, but I honestly don't know if it will work. Sorry! Maybe you can try contacting Summer Infant to see if they can give you the specs on the charger you need. I don't even know which model you are referring to as it is not coming up on any of my searches. Again, so sorry I can't provide the help you need.
Question:	What is difference between deluxe and mini dove tail kit
Answer:	No
Question:	Does this unit allow for variable spacing
Answer:	This one works for mine and its about 8 years old despite being a black cord.

Product description

The best and most versatile dovetail jig ever! Complete Dovetail Jig comes with: Two durable phenolic templatesThree 8mm shank carbide-tipped router bits (1/2 x 14 dovetail, 1/2 x 8 dovetail, 5/16 straight)1/2 to 8mm collet adapter7/16 guide bushing fits most routersDetailed eight-page instruction bookletQuick reference guide for standard joints

User questions & answers

Question:	which kind of router do I need? thanks
Answer:	It is always on.
Question:	how wide a board will this do
Answer:	I don't know what heattrdck is. The power cord that I purchased is for the Summerstep heated snowmelting stair mats and they work fine. If you need to find out if this power cord works with some other product, I recommend calling Summerstep.
Question:	Does it work well with a dewalt router
Answer:	Layla's answer is totally right. All the variations (typeA, typeB, 16008, 16009) are same on fabric/lining material and foldable&SPF features. But they has some difference on appearance and color options, which you could find from the images. :)
Question:	Been watching instruction dvd for about three years now and not a bit closer to using my $500 equipment than before I purchased it. Help
Answer:	It fits my head well and is foldable

Product description

One of the best just got better! The new D4R-24 jig features a one piece aluminum extrusion base with machined-in non marring textured clamping surfaces and machined-in side stops on the top and front of the jig body. The top side stops have a 3/8" recess for rabbeted boards. Like its predecessor, the D4R easily produces handmade looking dovetail pins and tails. Perfect fitting joints for tiny boxes or large case pieces can be produced in a variety of patterns by simply changing the adjustable guide fingers. Wooden pieces are clamped into the jig quickly and easily with the cam action clamps which can be adjusted for different stock thickness in seconds, or used to repeat the same clamp tension instantly. Through or half blind dovetails can be easily set up by simply flipping the finger assembly over. Jigs are meticulously engineered and constructed. Accepts boards up to 24" wide. Maximum pin thickness 11/4". Includes three carbide router bits, a 1/2" D x 8° x 8mm dovetail bit and a 5/16" x 1" x 8mm straight bit for through dovetails, and a 1/2" D x 14° x 8mm dovetail bit for half blind dovetails. Also included is a 1/2" to 8mm collet reducer and a 7/16" template guide bushing, a comprehensive instruction manual and instructional DVD.

• One piece aluminum extrusion base
• Easily produces handmade looking dovetail pins and tails
• Accepts boards up to 24" wide
• Maximum pin thickness 1-1/4"
• Includes three carbide router bits

User questions & answers

Question:	hi there. i want a metric version. this d4r metric or inch
Answer:	The regular dove tails are 1/2 inch the mini are 1/4 inch apart
Question:	Am i correct that the d4r allows for different sizes of pins, but the super 12,18, and 24 do not
Answer:	Have not used yet but alot of info on you tube to explain this tool.
Question:	Can I cut inlaid dovetails with this? Does Leigh have a how-to video of inlaid dovetails
Answer:	If the power cord cannot reach the mat or the Male and Female cords are too far apart to connect you will need to install a Summerstep extension cord. Summerstep extension cords are available in 2’ or 25’ lengths. https://www.amazon.com/Powerblanket-SMEC24-Summerstep-Heated-Extension/dp/B01MG76EQ7/ref=sr_1_9?keywords=summer+step+extension+cord&qid=1569356160&s=gateway&sr=8-9
Question:	can i use alternative dovetail bits besides 8mm shanks
Answer:	It just sits 'flush' with the trek deck step and is not really attached.

Product description

Amazon.com Enhance the capability of your 4210 or 4212 dovetail jig with this Porter-Cable Mini Through Templet. When it comes to fashioning miniature dovetails, hidden dovetails, through dovetails, box joints, and other small ornamental joints, this templet is a diamond in the rough and is the perfect tool for making small novelty items such as jewelry boxes. Set-up is made effortless with alignment lines. Cost-effective and well-equipped, the Porter-Cable 4215 includes a dovetail bit, straight bit, two templet guides, and two lock nuts.

Enhance the capability of your 4210 or 4212 dovetail jig with this Porter-Cable Mini Through Templet. When it comes to fashioning miniature dovetails, hidden dovetails, through dovetails, box joints, and other small ornamental joints, this templet is a diamond in the rough and is the perfect tool for making small novelty items such as jewelry boxes. Set-up is made effortless with alignment lines. Cost-effective and well-equipped, the Porter-Cable 4215 includes a dovetail bit, straight bit, two templet guides, and two lock nuts.

• Template kit for 4200 Series dovetail jigs
• Replacement Part for Model 4216; Accessory for Models 4210 and 4212
• Enables miniature half-blind and through dovetails, and miniature box joints to be cut
• Includes one dovetail bit, straight bit, two template guides, and two lock nuts

User questions & answers

Question:	Would this work with a rockler jig
Answer:	These templates can be used with both a hand-held router, or, turned upside-down, run on the router table. That setup is particularly helpful for dovetailing smaller boxes and drawers. It can also be used when cutting longer runs of drawers or boxes, as material can be ganged and cut quickly on the router table.
Question:	Regarding use of this mini jig: do you use the same bushing for both the pins/tails cuts, or different bushings
Answer:	Registering the two halves of the joint is very simple: cut the dovetail sockets first with the dovetail bit and Dovetail Template, then use that 1st board as your layout pattern. With your knife point, scribe one of the sockets into the end grain of the second board, with the edges of the two boards aligned. That pair of scribe marks is then exactly the size and location for the resulting pins (much as would be done when cutting dovetails by hand.) The profile of the wedge-shaped Pin Template will match the size of the pair of scribed marks exactly. Clamp the Pin Template in place, change the bit to the straight pattern bit, and proceed to cut the pins. Everything will match perfectly.
Question:	does this kit include the offset guides
Answer:	I think you can buy them at Woodcraft or from Whiteside. I suggest buying american made router bits. They outlast the imported ones.
Question:	I am looking for dovetail/pin bits for the 4215 Jig (mini dovetails) with a 1/2" shank. I am having trouble with the 1/4" shanks pulling out of the c
Answer:	Yes it comes with the two roller bits necessary to cut the dovetail joints.