11 best large router table

Product description

The folding base on our Convertible Benchtop Router Table can be quickly reconfigured for benchtop use, wall-mounted use, or collapsed entirely for storage or transport. In addition, the unique router plate lets you quickly remove the router for freehand use, then dock it again for table use—the compact size of the plate makes it light and nimble in freehand applications. Compact and portable, yet full-featured, the table is ideal for small shops and jobsite use. Triangulate the base and mount it to the wall of your shop or to stud walls on the jobsite. Use it on your benchtop or on the tailgate of your truck, then collapse it and tuck it under the bench or into the truck cab. Features: Four modes in one table: benchtop, wall-mount, freehand routing and storage/transport Base converts quickly from freestanding to wall-mounted—quick-release pins lock the legs in place In wall-mount mode, the router can be removed and the top folded flat against the wall when not needed Large non-slip feet clip into the base framing for rigidity in the various configurations Pull out the router with plate for freehand use; dock it in the table for table use Keyed mounting holes are 16'' on center for easy wall-mounting 3/4'' miter track accepts most standard miter gauges Accessory slot in fence accepts featherboards and stops Tall ergonomic fence knobs for fast fence adjustments without skinning your knuckles Will my router fit? The Rockler Convertible Router Table will accept most compact and mid-sized routers. It will NOT accept plunge routers or large routers like the 3-1/4HP Porter-Cable. It will also NOT accept the Porter-Cable PCE6430 Laminate Trim Router, due to its unique base design.

User questions & answers

Question:	Will the missize plate accept a milwaukee
Answer:	Contact Rockler they are helpful and friendly!
Question:	Can you use a Milwaukee 5626-20 & mount to this table? It’s a 3-1/2 hp 1/4-1/2 collet with a fixed base
Answer:	Not that I saw. Be careful mine came without a fence which I've had to make a couple of calls to get and not received it yet waiting 3 weeks. Listed routers are Bosch 1 and 1.5 hp, Makita, Porter Cable and Dewalt best bet call customer service, good luck.
Question:	Is it Compatible to Makita trim router rt
Answer:	Their technical documents show an RT0701C being used in the table, which I believe is identical to the rt0700, but I’m not positive the mount holes are spaced the same. Don’t know why they would not be, so I’d feel comfortable saying it is compatible.
Question:	Is tear out a problem with this jig
Answer:	It’s not really a jig as much as it is a fully functional, albeit, small router table. However, just like with any router, if you put a sacrificial piece behind the project piece tear out is virtually eliminated.

Product description

1 3/4 HP Bench-top router. Great router at a great price.

• Benchtop Router
• 1 3/5 Hp
• Great tool at a great price

User questions & answers

Question:	vac or 110vac
Answer:	It is only battery operated. You start with a fully charged battery and unplug the cord. You should not operate the tool while it is plugged in.
Question:	Are the guides removable so I can router larger sheets of material
Answer:	120V in---5V, 300ma out.
Question:	Can you use feather boards on the fence
Answer:	Yes you can stand on those materials while using this tool on minor tasks. For goodness sake, it's only 3.6v!
Question:	What size bit does it take
Answer:	It is in the package.

Product description

To make routing even easier, the table and fence sit atop a heavy-duty stand. Made from heavy-gauge steel, the stand can be adjusted from 29" to 35" high, and has levelers to compensate for uneven floors. Plus, the stand has predrilled holes that make it easy to mount accessories and to customize the stand.

• Heavy 12- & 16-gauge steel construction
• Adjustable in height from 29 to 35 Inches (736mm-889mm)
• 20 x 28 Inches (508mm-711mm) steel stand footprint
• Includes stable leveling feet, Easy assembly
• Durable powder-coated finish

User questions & answers

Question:	What is the inside distance between the legs? In other words, widest object able to slide into bottom shelf
Answer:	Hi，sorry to tell you we don't have smaller size now，but thanks for your suggestion！
Question:	Can a bosch benchtop router table ra1181 be mounted on this kreg krs 1035 stand
Answer:	No the rose gold wears off so it's gold and silver
Question:	what is the weight capacity of this table
Answer:	Hi，pls contact with our customer service if you want to get different writing on the three rings via below link：“Ask a question” https://www.amazon.com/sp?_encoding=UTF8&asin=&isAmazonFulfilled=&isCBA=&marketplaceID=ATVPDKIKX0DER&orderID=&seller=A24552M8Y0GEDI&tab=&vasStoreID=
Question:	Hello! Does the kit include the correct dimensions for the table top
Answer:	Yes,you just need do it in the webiste,we will received your engrave information from your order. :)

Product features

Kreg KRS1035 Router Table Stand

This durable stand is made from heavy 12- and 16-gauge steel and can be adjusted from 31" to 39" (78.7cm to 99.1cm) in height. It comes equipped with levelers to compensate for uneven floors. Plus, the stand has predrilled holes that make it easy to mount accessories and to customize the stand.

The Multi-Purpose Shop Stand is the perfect foundation for all Kreg table top solutions, including the Klamp Table and the Precision Router Table Top. You can also use it to create a custom tool or work stand for your shop. Includes four leveling feet and assembly hardware.

• Heavy 12 & 16-gauge steel construction
• Adjustable in height from 31" to 39" (78.7cm to 99.1cm)
• 20" x 28" (508mm-711mm) steel stand footprint
• Includes stable leveling feet
• Durable powder-coated finish
• Fast, easy assembly

Product description

The RAS900 come pre-assembled with an integrated accessory storage bag and a laminated MDF top. The self-contained structure provides storage for necessary parts like the fence and router bits. Included with the RAS900 is a guard, feather-board, miter gauge and bit inserts; along with a tall fence with adjustable laminated MDF faces; dual feather-boards, a starter pin and guard for support when routing curved work-pieces; a bit height gauge for easier bit setup and cutting precision, and additional accessory storage compartments. The RAS900 has a quick-release router mount that attaches and detaches in seconds. An efficient folding design means the table comes pre-assembled with minimal setup needed and legs fold for storage. Stability plus convenience makes this a great router table for any DIYer.

• Accessory storage containers protect and store accessories with router table
• RAS900 comes with 2 containers and includes quick clamp system
• 2 feather-boards help guide work-piece for more accurate routing
• Bit height gauge helps simplify set-up and improves accuracy of cuts
• Starter pin and guard help support work-piece when routing curved edges
• Router mounting with easy bit changes and no leveling required

User questions & answers

Question:	are fences independently adjustable so you can use it as a jointer? thanks
Answer:	Thank you for your question. The Dewalt models we have tested and have pre-drilled holes are DW616, and DW618 for the fixed bases only. However, if your model does not match up with any of the holes in the mounting plate you can mark off and drill the needed holes to match up with your router. If you have further questions please feel free to contact our Skil Customer Service Representatives at 1-877-SKIL-999 (1-877-754-5999)
Question:	can you use a dewalt router on it
Answer:	The router table will work for the following Craftsman (spelled with a C and not a K) routers: 17508, 17542, 26620, 17533, 17528, 17511, 26834, 28190, and 17541.
Question:	Will this table router work with a Kraftsman (Sears brand) router
Answer:	I have a skil plunge router 1835. Will it work with this table?
Question:	Can this table accomodate a Craftsman Professional 28084 router
Answer:	1/4”

Product features

Router Table (2 feather boards)

The RAS900 come pre-assembled with an integrated accessory storage bag and a laminated MDF top. The self-contained structure provides storage for necessary parts like the fence and router bits. Included with the RAS900 is a guard, feather board, miter gauge and bit inserts; along with a tall fence with adjustable laminated MDF faces; dual feather boards, a starter pin and guard for support when routing curved work pieces; a bit height gauge for easier bit setup and cutting precision, and additional accessory storage compartments. The RAS900 has a quick-release router mount that attaches and detaches in seconds. An efficient folding design means the table comes pre-assembled with minimal setup needed and legs fold for storage. Stability plus convenience makes this a great router table for any DIYer.

• Accessory storage containers protect and store accessories with router table
• RAS900 comes with 2 containers and includes quick clamp system

Product description

The Bosch RA1181 bench top router table provides a large work surface for woodworking and routing. Designed to fit a variety of routers, this router table is a versatile piece of equipment that will serve as an indispensable part of any woodworking shop. Its 2 1/2 inch dust collection port offers better dust collection for a cleaner work environment. The large aluminum top makes the table both durable and portable. This bench top router table includes mounting hardware, features a tall aluminum fence with adjustable MDF face plates, two out feed shims, and an aluminum router mounting plate. The starter pin and guard for router curved work pieces is also included, in addition to the built in cord wrap for convenient storage and portability.



Works with:



Bosch: 1613-Series and 1619EVS Plunge Routers; 1617-Series and MRF-Series Routers (in fixed base only)

Craftsman: Most Craftsman 1/2"-Collet Routers

DeWalt: DW616 and DW618 Routers (in fixed base only) Hitachi: M12VC Routers Makita: RF1100 and RF1101 Routers Milwaukee: 5615 and 5616 Routers Porter-Cable: 690-Series and 892-895-Series Routers (in fixed bases only) and 7529 Plunge Router Ryobi: R161, R162, R163, RE170 and RE180 PL Routers Skil: 1810, 1815, 1820 and 1825 Routers Template Guides: The RA1181 does not accept any template guides. Vacuum Hoses: Common 2-1/2" Vacuum Hoses attach directly to the RA1181. Vacuum Hose Adapter for 35 mm Hoses, such as Bosch 35 Hoses: VAC004.

• Benchtop router table design – Features a large aluminum top for extended work area, durability and precision
• Rigid aluminum mounting plate – Pre-drilled for compatibility with a variety of routers and for above-table height adjustment
• Extra tall aluminum fence – Has adjustable faceplates and feather boards to maximize precision and versatility
• Dedicated standard dust-collection port – Fits standard 2-1/2 inch vacuum hoses for debris-free operation to help keep your work area clean
• Easy-to-use adjustable feather boards – Attach to fence and table, providing additional guidance and kickback protection
• Accessory slot – Accepts feather boards and 3/4 inch optional accessories such as a miter gauge
• Storage pocket – Allows storage of router accessories
• Cord-wrap storage – Stores 6 foot power cord

User questions & answers

Question:	can a router lift be attached
Answer:	As far as I can tell, the bundle includes everything, but the kit does not include the ring set. However, the ring set is available for $19.11, which makes adding it on to the kit cheaper than the bundle right now.
Question:	Would this work with a milwaukee 5616 router
Answer:	Yes you can buy the pre drilled router plate for that router
Question:	Can I mount this table to a different base? I want a router table that mounts on a taller stand, rather than a bench top unit
Answer:	quick look at the woodpecker top looks like the t tracks are to close together, and the jessum track size is proprietary.
Question:	can you provide list of routers that fit without modifications
Answer:	If the table width is 32 than yes.

Product features

Bosch RA1181 Benchtop Router Table

The Bosch RA1181 benchtop router table provides a large work surface for precision and versatility. The large aluminum top makes the table both durable and portable. Designed to fit a variety of routers, this router table is a versatile piece of equipment that will serve as an indispensable part of any woodworking shop. Its rigid aluminum router mounting plate is pre-drilled for compatibility with a variety of routers and for above table height adjustment with many common routers. Its 2-1/2 In. dust-collection port offers better dust collection for a cleaner work environment. This benchtop router table includes mounting hardware, features a tall aluminum fence with adjustable MDF faceplates, two outfeed shims, and an aluminum router mounting plate. The starter pin and guard for routing curved workpieces is also included, in addition to the built-in cord wrap for convenient storage and portability.

Large Aluminum Top

For extended work area, durability, and precision.

Aluminum Mounting Plate

Pre-drilled for compatibility with a variety of routers and for above table height adjustment with some routers

Extra Tall Aluminum Fence

With adjustable MDF faceplates and featherboards to maximize precision and versatility.

Dust Collection Port

To help keep your work area clean.

Product description

Easy assembly and a host of added features improve on an already great router table! The included router insert plate has been designed to mount to any router utilizing your router’s base plate and an easy-to-use template. The fence uses an L-shaped aluminum extrusion with two fully independent fence faces to provide zero-clearance support. The Precision Router Table Top is made from MDF covered in Easy-Slide Micro-Dot high-pressure laminate and includes an aluminum miter channel/T-slot that works with a wide variety of accessories. The Multi-Purpose Steel Stand is powder coated for durability. The Complete Router Table includes Router Table Top, Router Table Fence and Multi-Purpose Steel Stand. Optional item #148166 KREG 4pc Casters Set not included with purchase of item #160628. Features: 24" x 32" router table top includes a router insert plate with three molded Level-Loc reducing rings 36" T-square style router table fence features a micro-adjust wheel for precise setups Outfeed anchor has been redesigned for more usable table space and easier removal Multi-purpose steel stand is adjustable from 31" to 39" in height Includes Router Table Top with insert plate, Router Table Fence and Multi-Purpose Steel Stand, #148166 KREG 4pc Casters Set not included

• 24" x 32" router table top includes a router insert plate with three molded Level-Loc reducing rings
• 36" T-square style router table fence features a micro-adjust wheel for precise setups
• Outfeed anchor has been redesigned for more usable table space and easier removal
• Multi-purpose steel stand is adjustable from 31" to 39" in height
• Includes Router Table Top with insert plate, Router Table Fence and Multi-Purpose Steel Stand. #148166 KREG 4pc Casters Set not included.

User questions & answers

Question:	Can the insert plate on this bundle be specified so as to fit the bosch 1617 router? (predrilled for porter-cable & bosch
Answer:	We default engrave it in the middle,both side can engrave 2 lines and 15 characters per line.
Question:	Are the table stop and unnecessary micro adjuster inclded in this kit as pictured but not described anywhere
Answer:	Hola no estoy segura,pero creo que mide el anillo 6mm solo tú sácalo en cm o ve si en donde está lo del anillo hay alguna tabla de medidas,ojalá te haya ayudado en algo
Question:	what is the difference between the table fence kit($699) and table fence bundle
Answer:	If you don't move it,it will not spin.
Question:	will this table fit the Bosch 1617evspk router
Answer:	They as laser engraved product，it will not fading

Product description

Kreg's freshly redesigned Precision Bench top Router Table (new item# PRS2100) now offers even more features that give it the capability of a full-size, industrial router table in a portable package. More than ever before, this makes the Precision Bench top Router Table a perfect routing solution, whether they want a router table to use on a job site or compact router table to use in the shop. You will notice the all-new router insert plate right away. It measures 9-1/4" x 11-3/4" x 3/8" to support even the biggest routers and it features Kreg's new Level-Loc Reducing Rings. These rings simply twist into place and lock in flush with the plate surface every time. Three Level-Loc rings are included: 1", 1-3/16" (for use with Porter-Cable style guide bushings) and 2-5/8". More Level-Loc ring sizes are available in a set of 5 (sold separately). The plate also has laser-engraved markings on the underside that make it easy to mount any router and it comes with a set of Kreg's Precision Insert Levelers. The redesigned Precision Bench top Router Table also features Kreg's upgraded industrial-quality fence. It features all-new cam clamps that allow you to adjust the fence quickly and easily and lock it in place securely. Like before, the fence is made from anodized aluminum, has adjustable sliding faces and works as a vertical jointer. To make routing even easier, the Precision Bench top Router Table has a large 16" x 24" table that's made from thick MDF to dampen vibration. The table offers the same durable Easy-Slide skin as Kreg's full-size router tables and has a miter gauge slot. That table is supported by a heavy-duty steel stand that has a wide stance for extra support, plus thick rubber feet to dampen vibration. The open design helps reduce router noise and the base has predrilled holes that allow it to be enclosed if desired.

• Industrial-quality fence containing adjustable faces, dust collection, vertical jointing and new cam clamps
• Full-size router insert plate with precision plate levelers and new Level-Loc reducing rings
• Extra-large 16" x 24" MDF table top with an Easy-Slide surface
• Wide stance heavy-duty steel stand for increased stability
• Includes: MDF top, full-size insert place with 3 Level-Loc rings, insert plate levelers, extruded aluminum fence and heavy-duty steel stand

User questions & answers

Question:	does this plate have pre drilled holes for skil 1820 or skil
Answer:	No.. the mounting plate is not pre-drilled for any specific router.. it does however have a centering template pre-printed on the mounting plate that makes laying out the specific Router holes quick, easy and accurate.. just follow the directions and make sure to use a backer board to prevent tear-out on the mounting plate when drilling the holes.
Question:	Does this take a standard miter gage in the slot from a Delta table saw, or an aftermarket coping sled
Answer:	It will certainly fit, the track seems to be slightly wider than the slot on my table saw. My expandable feather boards are slightly loose in the track of the router table.
Question:	Does the router mounting plate come pre-drilled for a certain designated router model or do you have to do the drilling? Template
Answer:	You drill your own mounting holes using the provided template
Question:	what is the exact size of the pre-drilled opening in the router table (without the inserts
Answer:	Level-Loc Insert Plate Dimensions:9-1/4" x 11-3/4" x 3/8"Insert Plate Material: PhenolicTable Surface Dimensions: 16" x 24"Fence Material: Aircraft Grade Anodized AluminumOverall Dimensions: 20" x 28-1/4" x 20-1/4"Overall Product Weight: 26 lbs.

Product features

Precision Benchtop Router Table

The Kreg Precision Benchtop Router Table offers features that give it the capability of a full-size, industrial router table in a portable package. Whether you want a router table to use on a job site or a compact router table to use in the shop, the Precision Benchtop Router Table is a perfect routing solution for you.

Rugged Table Top

The table top is made from an edge-banded, vibration- and noise-resistant MDF, and features an Easy-Slide Micro-Dot skin. The skin is constructed from a high-pressure laminate, which allows you to easily slide workpieces across the surface.

Precise Insert Plate

The Precision Router Table Insert Plate measures 3/8" x 9-1/4" x 11-3/4" to support even the biggest routers, and features Kreg Level-Loc Reducing Rings. These rings twist into place and lock in flush with the plate surface every time. Three Level-Loc rings are included: 1", 13/16" (for use with Porter-Cable style guide bushings), and 2-1/8".

Full-Featured Fence

The heavy-duty aluminum fence has quarter-turn locking levers for quick fence adjustment and confident locking, sized so they're easy to use but stay out of the way behind the fence. The fence also has independent sliding faces that provide increased workpiece support around the bit, and with the use of the included jointing rods, allow the table to be used as a vertical jointer.

Quiet Routing

By combining a noise-absorbing MDF table top with a rigid steel base and vibration-dampening rubber feet, our Precision Benchtop Router Table is incredibly quiet and actually tests quieter than most enclosed router tables.

Product description

Install, connect, and cut dust by over 90%. The DustRouter can be mounted directly to your router table or insert plate, making it easy to adjust or change your tools. Enjoy maximum dust collection while edge trimming, cutting grooves, slots, dadoes, dovetails, and more.

• Use with or without the router table fence
• Connect hoses from the dust port and dust cup with the vacuum source
• Easy to attach to most router tables for permanent or temporary use
• Standard hose size 1-1/2″ (38mm) diameter, attaches to workshop vacuums and dust collectors
• Flexible silicone dust cup with Velcro fits most routers and lifts

User questions & answers

Question:	Can this work with a router lift
Answer:	Yes, this can be used with a router lift.
Question:	would this connect to a bosch ra1181 router table . both holes accept a 2 1/2" vac hose
Answer:	I would assume so. I use 2.5 inch tubing all the way around. Dust cyclone between a shop vac and the Milescraft system. This thing works great. Add a mechanism to capture the chips/dust on top of the table and it will capture 99 of dust. I separately purchased the Woodpeckers Precision Woodworking Tools FHG Free Hand Guard for this portion of the dust collection.
Question:	Wil it works With kobalt router table
Answer:	You might need to drill a hole in the back for one of the vacuum tubes. But should work just fine
Question:	will a 2 1/2" shop vac hose plug into the tee. also will one of the hoses plug into a 2 1/2' dust port on my fence
Answer:	I am very happy with this product. I have a Kreg router table and one of the hoses plugs right into the dust port on the fence. I use a 2-1/2 connector to connect the other hose to the shop vac hose. You might be able to plug the shop vac hose directly into the T but it might be too heavy. The product comes with a 3 to 4 foot hose and I use that one because it weighs much less. THis does a great job of reducing dust.

Product features

Milescraft 1501 DustRouter

Now you can breathe easy with the Milescraft DustRouter! Install, connect, and cut dust by over 90%. The DustRouter can be mounted directly to your router table or insert plate, making it easy to adjust or change your tools. Enjoy maximum dust collection while edge trimming, cutting grooves, slots, dadoes, dovetails, and more.

T-Connection

Standard hose size 1-1/2″ (38mm) diameter, attaches to workshop vacuums and dust collectors

Velcro Mounting Pads

Mount directly to your router table or insert plate and varying hole sizes

Silicone Cup

Dust cup with Velcro fits most routers and lifts

and can be cut open along scissor line for easy exchange of router bits

Product description

The Bosch RA1141 Benchtop Router Table delivers ease of use plus stability, featuring an easy click router mount that attaches and detaches in seconds, with no leveling required. It has a smooth laminated MDF top, plus it has adjustable laminated MDF face plates for better support. The tall fence handles taller stock, and dual feather boards provide additional control while feeding stock across the table. There’s a bit-height gauge for easier bit setup and enhanced cut precision. With an easy-to-store folding design, this preassembled table has folding legs with storage compartments for convenience and portability. When routing curved work pieces, the starter pin and guard help support the work piece to allow easier control.

• Ultra-portable design – Features folding legs for fast setup and easy storage
• Easy click router mounting system – Provides easy bit changes and no leveling
• Laminated MDF top – Helps users make smooth and precise cuts
• Onboard storage – Ideal for holding router bits and spare parts
• No assembly required – Comes preassembled
• Tall fence with two adjustable feather boards – Helps to provide extra control and guide work
• Starter pin and guard – Allows easier control for routing curved work pieces
• Bistro-height gauge – Provides easier bit setup and enhanced cut precision

User questions & answers

Question:	Is the router included
Answer:	Router is not included
Question:	Its the same has a skil ras900, but with different color, any difference in quality ?i though bosh made stuff and not buy from seller and slap names
Answer:	I have the Skil 900 Router table along with the Skill Router. I had to purchase a new router ecosystem because my Skil Router would no longer hold it's depth settings. so I purchased the Bosch 1617 EVSPK Router Combo Kit and the Bosch Router Table RA1181with an additional Fixed base. When I was taking the Skil router table down I noticed a label on it which said Robert Bosch Company. My skil table quick release wasn't compatible with the Bosch Fixed base otherwise I probably would have used my Skil Router Table. I will say the Bosch Router table 1181 is much nicer. The MDF platform was ok except dust go in on the plastic edges and the edges separated from the table slightly. I'm a very light DIY type of person. If my Skil Router had a more robust/accurate depth guide I probably would still be using it.
Question:	I can see there is an on/off button on the table, do i have to stick with same electricity voltage of the router
Answer:	Yes, the router is designed to work with 120v, the router table has a on off switch which will need to be plug into a 110 outlet, when the router is inserted into the table , it is plugged into the outlet on the table, using voltage greater than 120v will burnout the brushes in your router.
Question:	The mounting plate is different as ra1181 or ra1171. i guess this item is for bosch only, right
Answer:	Hi! The Bosch RA1141 Portable Benchtop Router Table is compatible with the following routers: Bosch 1617-Series Routers (in fixed base only), Craftsman 17508, 17511, 17528, 17533, 17541, 17542, 26620, 26834, 28190, and 73277 Routers, DeWalt DW616 and DW618 Routers (in fixed base only), Hitachi M12VC Routers, Makita RF1100 and RF1101 Routers, Milwaukee 5615 and 5616 Routers, Porter-Cable 690-Series and 892-895-Series Routers (in fixed bases only) and 7529 Plunge Router, Ryobi R163K Router, and Skil 1810, 1815, 1820 and 1825 Routers. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Product features

Bosch RA1141 Portable Jobsite Router Table

The Bosch RA1141 Portable Jobsite Router Table delivers ease of use plus stability, featuring an Easy Click router mount that attaches and detaches in seconds, with no leveling required. It has a smooth laminated MDF top, plus it has adjustable laminated MDF face plates for better support. The tall fence handles taller stock, and dual feather boards provide additional control while feeding stock across the table. There’s a bit-height gauge for easier bit setup and enhanced cut precision. With an easy-to-store folding design, this preassembled table has folding legs with storage compartments for convenience and portability. When routing curved workpieces, the starter pin and guard help support the workpiece to allow easier control.

Ultra Portable Design

With folding legs for fast set up and easy storage.

Easy Click

Router mounting system for fast and easy set up. Also allows for no leveling and easy bit adjustments.

Laminated MDF Top

For smooth and precise cuts.

Onboard Storage

Perfect for holding router bits and spare parts.

Product description

The Kreg’s Precision Benchtop Router Table offers more features that give it the capability of a full-size, industrial router table in a portable package. Whether you want a router table to use on a job site or a compact router table to use in the shop.

Precision Benchtop Router Table

The Precision Router Table Insert Plate measures 3/8" x 9 1/4" x 11 3/4" to support even the biggest routers, and it features Kreg’s new Level-Loc Reducing Rings. These rings twist into place and lock in flush with the plate surface every time. Three Level-Loc rings are included: 1", 1 3/16" (for use with Porter-Cable style guide bushings), and 2 1/8". More Level-Loc ring sizes are available in a set of 5 (sold separately). The plate also has laser-engraved markings on the underside that make it easy to mount any router, and it comes with a set of Kreg’s Precision Insert Levelers. 

Full-Featured Fence

The heavy-duty aluminum fence has been redesigned, too, with new quarter-turn locking levers. They allow quick fence adjustment and confident locking, plus are sized so they're easy to use but stay out of the way behind the fence. The fence also has independent sliding faces that provide increased workpiece support around the bit, and, with the use of the included jointing rods, allow the table to be used as a vertical jointer. A bit guard and a dust-collection port are also included.

Handy Power Switch

Add safety and convenience to your Kreg Precision Router Table with this handy power switch. This unique switch features a two-plug design to control two independent devices at once, Key-Lok to eliminate accidental power-on, and an 8-foot-long, heavy-duty, 14-gauge power cord a perfect companion.

Bundle includes:

• Kreg Precision Benchtop Router Table
• Kreg Multi-Purpose Router Table Switch

• BUNDLE INCLUDES: Kreg Precision Benchtop Router Table with Kreg Multi-Purpose Router Table Switch
• PRECISE INSERT PLATE: The Precision Router Table Insert Plate measures 3/8" x 9 1/4" x 11 3/4" to support even the biggest routers, and it features Kreg’s new Level-Loc Reducing Rings. These rings twist into place and lock in flush with the plate surface every time. Three Level-Loc rings are included: 1", 1 3/16" (for use with Porter-Cable style guide bushings), and 2 1/8"
• FULL-FEATURED FENCE: The heavy-duty aluminum fence has been redesigned, too, with new quarter-turn locking levers. They allow quick fence adjustment and confident locking, plus are sized so they're easy to use but stay out of the way behind the fence. The fence also has independent sliding faces that provide increased workpiece support around the bit, and, with the use of the included jointing rods, allow the table to be used as a vertical jointer
• HANDY POWER SWITCH: Add safety and convenience to your Kreg Precision Router Table with this handy power switch. This unique switch features a two-plug design to control two independent devices at once, Key-Lok to eliminate accidental power-on, and an 8-foot-long, heavy-duty, 14-gauge power cord – a perfect companion to the Kreg Precision Router Table and Kreg Precision Benchtop Router Table
• PRECISE BENCHTOP ROUTER TABLE: Kreg’s Precision Benchtop Router Table offers more features that give it the capability of a full-size, industrial router table in a portable package. Whether you want a router table to use on a job site or a compact router table to use in the shop, the Precision Benchtop Router Table is a perfect routing solution for you

User questions & answers

Question:	Can I use any router with this table
Answer:	Yes.. 1-2 Horse Power should fit. The mount is universal fit for the router.. Contact Kreg for dimensions.
Question:	Does the kreg prs2100 bench top router table with the accessories include a starter pin for curved cuts? is it easy to buy/install one if not
Answer:	It does include a starter pin. It is easily installed and removed. I am not sure if it is easily purchased. FWIW I did have to contact Kreg customer service for a part that was missing and they expedited the part to me. They were very responsive and knowledgable about the product.
Question:	Does this fit a DeWalt router
Answer:	Yes I installed a DeWalt router into mine. You drill your own holes into the mounting plate so pretty much any router will work.
Question:	Does this include everything pictured
Answer:	Hi Jacob. I don't know what is included with the Kreg router table. Amazon prime shipped it several days late. When I finally got it UPS had beat it to a pulp. Amazon said they couldn't replace it even though they had 14 still listed. Then I was told I had to pay for a return shipping slip because I didn't have a printer. Sorry, what you see may not be what you're going to get. Good luck.

• 【Extra Large Extension Table to the Main Table】Besides the main table, this router table features extension tables at both ends. Each extension table comes with an extra-large size of 8" × 18" and an easy-slide surface, helping you complete routing projects better.
• 【Retractable Guard and Suits Most Router Bits】There is a transparent guard inserted into the fence with no binding to keep wood chips from flying around. This router table is designed for routers with up to a 6-inch (155mm) diameter base plate. Router bits with base plates within this size all works.
• 【Multifunctional Fence and Exact Miter Gauge】The fence is able to provide work piece support around the bit and with the combination of jointing fence to make the table be used as a vertical jointer. On the tabletop, it includes a precise miter gauge for aiding in straight and predictable cuts. It can be used to help measure angles.
• 【Selected Material and Rugged Durable Frame】Consists of aluminum alloy do of the main table and steel do of the extension table and structure, this router table is rugged durable. The aluminum table is rustproof and lighter for easy moving, and the wide stance heavy-duty steel stands increase the stability.
• 【Quick Installation and Easy Care and Cleaning】Coming with detailed instruction manual, you can easily complete the assembly by referring to it. The grooved surface keeps dust and chips away from work place, making cleaning easier. It’s easy to maintain this router in a dry and cool place.

User questions & answers

Question:	Will this fit my dewalt 2 1/4 dw618pkb router
Answer:	Yes
Question:	What size shank do you need? Can I use this to make a tongue and groove
Answer:	All this is is a table, you supply the router.
Question:	Is this work for dewalt 20 v Cordless
Answer:	I do not understand why so may people assume that I (amateur) is an 'expert' on every router ever manufactured (?!) ... but I would presume so??
Question:	does this work with dewalt 621 plunge router
Answer:	To the best of my knowledge, it does.

Product features

Choose our router table as a good partner for your work

Are you a woodworking amateur? Do you want to have your own router table? Our this router table converts routers into stationary power tools, making woodworking easier. It comes with ample working space and fits most router bits. It offers a precise miter gauge for aiding in straight and predictable cuts. This router working table is a versatile, affordable item for every wood worker.

Features

• Over 450 square inches of durable aluminum work surface
• With an adjust working table and the full extension can reach 8"
• Designed for routers with up to a 6 inch diameter base plate
• Transparent guard which can move freely with no binding that keeps wood chips from flying around
• A precise miter gauge for aiding in straight and predictable cuts
• Get CSA approvals

Adjustable Extension Table

Full extension can reach 7.8"

Tall Aluminum Main Fence and Jointing Fence

For better support and smoother operation

Dust Ports

For removing dust and debris

Dual Outlet Switch

Power switch 3-prong plug