14 best drill guide attachments

Product description

Turn your portable drill into a drill press and get the accuracy you need at a job site! The guide attaches directly to a 3/8" drill chuck, and allows you to drill larger pieces you can't fit on your stationary press. Pre-drilled holes allow you to attach a base or mount it to a table.

The Wolfcraft Drill Guide can be used in horizontal, vertical or angle positions, and fits all 1/4-inch or 3/8-inch drills. The Guide-bars themselves have springs for a quick return when doing repetitive drilling, while drill adapter itself slides up and down on guide-bars. Angle positions can go up to 45 degrees, and rubber pads in the base hold the guide in place while drilling. The guide also includes spring loaded depth stops.

From the Manufacturer

Now you can achieve drill press precision with your hand drill. Perfect for working on the job site. Guide attaches directly to 3/8inch drill chuck. Maximum 6000 RPM.

• Drill guide that can be used in horizontal, vertical or angle positions
• Guide-bars themselves have springs for a quick return when doing repetitive drilling
• Drill adapter itself slides up and down on guide-bars
• Angle positions can go up to 45 degrees, and rubber pads in the base hold the guide in place
• Fits all 1/4-inch or 3/8-inch drills

User questions & answers

Question:	Does this come with a chuck key? I haven't had a drill motor in years that needed one
Answer:	I've used a 3/64 bit in mine, never tried anything smaller then that.
Question:	Country of origin
Answer:	The unit measures 12mm from the end of the chuck to the outside of the housing at the 90 degree turn. The unit measures 112mm from the end of the chuck to the rear/back of the 90 degree turn The unit measures 160mm vertically. If you give me your email I can send you a photo showing all the measurements.
Question:	What is the dimension from the bottom of chuck to bottom of base
Answer:	A few thousandths less than ⅞ of an inch.
Question:	What is the diameter of the base & the hole in base
Answer:	Yes, the side handle is removable and can be attached to either side. There is a hex shaped recess on each side for the supplied hex bolt. No tools are required to attach or detach the handle.

Product features

wolfcraft Multi-Angled Drill Guide (4525404)

wolfcraft's Multi-Angle Drill Guide allows you to drill clean, accurate holes with your portable drill. Sets up fast and is perfect for indoor and outdoor projects where you need accurate holes, but using a drill press isn't an option. The guide is most useful for repetitive drilling and for drilling centered holes on board edges and round stock. The guide accommodates all 3/8 in. and 1/2 in. drill chucks and can be used in horizontal, vertical or angled positions, anywhere from 0-45 degrees.

Freehand Drilling Like A Pro

With this lightweight, practical attachment, drilling precise, centered holes becomes child's play. Whether it’s on the wall, on the ceiling, at a slant, or in round materials, exact drilling is easy.

Accurate, Centered Holes

Simply twist the base plate for immediate centering on board edges. Double guide bars are attached to the cast metal base scale and can be shifted back-and-forth to set your preferred angle up to 45°. The straight stop and the adjustable depth-stop make repetitive drilling a breeze.

Holds Round Materials Securely

Round materials are secured in the cast V-Groove channel, so even pipes can be drilled without slipping. The base plate has a centering device which guarantees centered drilling. For materials up to 3 inches in diameter.

No Slipping

The guide bars and removable handle make controlled, accurate drilling a reality. The base’s four pre-drilled holes allow you to attach a base or mount it to a table.

Product description

The General Tools 36/37 Precision Drill Guide multi-purpose drill accessory is ideal for angled drilling, doweling, plug cutting and edge sanding. Attaches to any 3/8 in. or 1/2 in. power drill. Adjustable in 5-degree increments from 0 to 45 degrees, left and right. V-guides on the base permit drilling through the dowel or other rounded stock. A slide lock facilitates sanding and buffing applications. This drill guide and chuck is portable and lightweight, folding flat for toolbox storage.

GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools.

For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction.

WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

From the Manufacturer

The precision drill guide attaches to all 3/8-Inch and 1/2-Inch power drills

• BUILT IN PROTRACTOR- drills accurate right-angled or variable-angled holes with the built-in protractor scale
• ADJUSTABLE- adjusts from 0 to 45 degrees in 5-degree increments in either direction of vertical drill position
• POSITIVE STOP- built-in depth stop for accurate drill depth
• WORKS WITH DOWELS- v-groove for positioning round stock, pipe or tubing. A slide lock facilitates sanding and buffing
• STABLE- anchoring pins to hold the guide securely in place on flat surfaces, narrow edges or large tubing

User questions & answers

Question:	Is this suitable for drilling 4x4 posts for cable railing? Can it handle
Answer:	It should work for 4 x 4 posts actually 3 1/2 x 3 1/2 drilling straight through the 4 x 4. If you are going to be doing stairs you will have to make yourself a jig based on the rise of your stair angle. I don't think the guide allows for enough angle to work for the stair riser. Hope this helps....
Question:	How does it stay secured on work piece
Answer:	If its rough work, such as drilling through a 6x6 post, its has holes that allow you fasten the base to the wood with screws. If its finished work, you need to make a jig. I traced the outline of the base on a piece of 3/4 plywood and cut a hole to fit the base. Then i secure the plywood with a clamp.
Question:	Regarding the body's construction; Is it plastic or cast metal
Answer:	Horizontal parts are almost all plastic; vertical parts are mostly metal (but not cast metal).
Question:	Where was this drill guide made
Answer:	in a third grade classroom in china

Product description

Drill straight holes all the time! With the DrillMate you can drill straight or angled holes, drill on the edge of a board or even round stock. The drive shank attaches to your 3/8" Or 1/2" power drill while the keyed output chuck works with most 3/8" drill accessories. The all-metal construction DrillMate provides the precision of a drill press with the ease of a hand drill. Smooth operation and controlled drilling via spring and bearings prevent cutting tool from hitting work piece. Adjustable depth-stop makes repetitive drilling to any depth with near drill press precision. The metal base has a scale with easy to read angles, v-grooves for centering of round materials, and holes for permanent mounting for special fixture applications. Also includes auxiliary handle for controlled movement and rubber feet that give the base a nonslip option.

• Perfect for straight or angled drilling, drilling on the edge of a board or on round stock
• Attaches to all 3/8" And 1/2" Power drills and it also includes a 3/8" Capacity chuck with key
• Angle cuts of 45 Degree to 90 degrees, with a built in angle read out in the all metal base
• Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter
• Adjustable depth stop and spring action control of the head

User questions & answers

Question:	What's the max depth of cut
Answer:	As answered you can get a copy of the manual from Grizzly or from Amazon.http://cdn0.grizzly.com/manuals/w1668_m.pdfandhttp://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000041994.pdfThey are not identical (40 pages on the Grizzly website, and 27 on the Amazon page).On difference is the depth stop. On the Grizzly site it is a jam nut on the depth stop rodon the left side, on the Amazon it is set on a collar lock knob on the spindle on the right side.My drill press has both depth stops, but the spindle does not have the depth label, and is notmentioned in the manual that came with the drill. When using the oscillating sander feature itcould be damaged if either stop is set.
Question:	Does it use Bearings or Bushings for the spindle
Answer:	I'd been wondering this myself... The Stock part on my W1668 is not a belt, but rather a polyurethane o-ring. The closest analogue I could find was here: http://www.amazon.com/dp/B0051Y2LSO/ref=biss_dp_t_asn If you want true OEM parts, you can call Woodstock international at (360) 734-3482 7AM-5PM PST/PDT M-F
Question:	Does anybody know how many inches the stroke is? Thank you
Answer:	Yes. Page 14 of the manual supplied with the drill press says, "The drill chuck is seated to the spindle with a JT-33 tapered surface and a screw."
Question:	What's the diameter of the opening in the base
Answer:	Also..it's a GREAT drill press!

Product features

Milescraft DrillMate

With the Milescraft DrillMate portable drill stand, you can drill straight holes, angled holes, on the edge of a board or even round stock. Everyone knows that the success of many DIY projects depends on drilling straight and accurate holes. Now you can add a whole new level of accuracy with this drill guide jig when drilling holes with your standard hand drill.

All Metal Head

Head is all metal construction that has a hex shank chucks to 3/8" and 1/2" drills. Easy glide bushing in the head, eliminate play and wobble, for precise drilling.

Adjustable Angle Settings

Angle readout for setting drilling angles to 45°, 60°, 75°, and 90°

V-groove

Metal base and three v-grooves for drilling on round stock.

TPE Feet

Non-slip TPE feet prevent slipping and marring on the work surface, that can be removed to mount with screws when needed.

Large Handle

Can be mounted in a fixed position on the base for maximum support no matter what drilling motion you are doing.

Depth Stop

Adjustable depth stop for repetitive drilling.

3/8" Keyed Chuck

Compatible with most 3/8” drill accessories and includes chuck key, which can be store in the TPE feet holes.

Product description

The General Tools and Instruments 825 Drill Grinding Attachment extends the life of your drill bits by sharpening them back to factory tolerances. The angle adjustment gauge allows you to match the point angle of nearly any bit and even works on countersinks. Designed with a pivoting neck for simple grinding of both sides of the bit. The Drill Grinding Attachment is intended for use with ANSI, OSHA and UL approved standard electric bench grinders or surface grinders.

GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools.

For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction.

WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

• Knobs, Handles, Workholding & Machine Tool Accessories
• Country of manufacture: Taiwan
• Manufacturer: GENERAL TOOLS

User questions & answers

Question:	can i use it on the left side on my bench grinder
Answer:	si, tiene un adaptador
Question:	Can this be used with a belt sander
Answer:	I wouldnt suggest it. The attachment is probably too large to fit and i dont think the dremel would provide enough power. I used a Ryobi 19.2V Power drill and it needed full power and speed to polish well.
Question:	will this sharpen drill bits with a hex attached, similar to the Milwaukee Shockwave
Answer:	YES HOOK AND LOOP
Question:	What size drill bits can it sharpen up to
Answer:	The most effective/compatible products for the sponge pads are: Swirl n Scratch Remover, Polishing Compound, Rubbing Compound. If you are a total cheapskate, toothpaste in a pinch. For the buffers, it's basically car wax, but really AFTER you have taken off most of the dried wax (and surface dirt) with shop towels. For a mirror finish, don't skip any steps...hand wash your car well, use any car clay kit to lift off surface particles & contaminants from your old wax and clear coat. Then, apply compound sparingly around the sponge (5-6 dots) and use light, even pressure to "cut" the top layer of topcoat. Do even rows, steady light pressure and one panel at a time...keep the tool moving...the point is to micro-abrade...just smooth the surface of clear coat, not take it all off! Done properly, that sponge step should remove most scratches and surface dullness, even on headlights. Rinse or wipe the compound residue off. Then, apply a good paste wax or liquid wax, let it dry, then remove with shop towels, etc. Only then do you whip out the buffer pads and polish it up to a jewel finish. Apply sunglasses! You can hand wash these pads in DAWN...with care, they last a few applications.

Product features

Gives a new life to your drill bits

No more throwing off drill bits when they get old, no you can give them a new life, regain the sharpness, all in just a few simple steps. The General Tools 825 Drill Grinding Attachment helps you increase the life of your drill bits by sharpening them that makes them useful just as new. This tool is perfect for professional as well as personal use. The safety feature of the tool that protects material surface is the Non-marking depth stop cap.

Packed with features to suit your needs

The tool has adjustment features to cater to your needs. The angle adjustment gauge lets you match the point angle of nearly any bit, and even works on countersinks. For an all-round grinding action, the tool comes with a pivoting neck. The angles that the grinding attachment support are Standard Angles 88, 68, 59, 49, 41 Degrees.

Product description

Specification:

Material: Plastic & High Speed Steel

Inner Diameter: 19mm/ 0.75 inch

Outer Diameter: 26mm/ 1 inch

Drill diameter: 3.175mm

Tool Converter Diameter: 60mm/ 2.4 inch; Height: 42mm/ 1.65 inch



Feature:

1.Cutting guide HSS router drill bit is very easy to install with rotary tool.

2.The large window of it also provides a good visibility when you do your drilling work.



About US

Cyful focus on retail and wholesale hardware items and other accessories, all of the products we sell are strictly selected, we provide high quality, the most popular, affordable price products to worldwide.



Warmly Note:

1.) The colors may have difference as the different display, please understand.

2). Please allow 1-2mm error due to manual measurement, please make sure you do not mind before you bid.



100% Satisfaction Guarantee: We are super confident in the quality and comfort of our product that we offer 100% satisfaction guarantee! Try our products and if you don't absolutely love them just let us know. We are committed to bringing all of our customer an pleasant shopping experience.

• Package Content: 1x Cutting Guide; 4x Drill; 6x HSS Routing Router Bits.
• Material: The drill locator is made of high-quality plastic material, drill bit and milling burrs are made of steel, very sturdy and durable to use.
• Application: Cutting Kit allows for sturdy, controlled cuts in a variety of materials including wood, ceiling tiles, drywall, laminate, fiberglass, plastic and vinyl siding.
• Installation Steps: Screw down nut, install the woodworking cutter; Install the cutter locator; Adjust the milling cutter to the same plane as the locator, and remember to adjust the scale; Adjust depth according to demand.
• No Risk Purchase: Just try Cyful's products and we believe that you will love them as we do, if you don’t absolutely love them let us know and we will we offer a 129% money back guarantee. NO QUESTIONS ASKED!

Product description

Specifications: Material: plastic

Color: black

Include:1x Cutting Guide, 4x Dril, 6x HSS Routing Router Bits.

• Color:Black
• Include:1x Cutting Guide, 4x Dril, 6x HSS Routing Router Bits.
• Material: plastic,Metal
• SIze: Cutting Guide:68MM*60MM,Dril:60mm*2mm,
• HSS Routing Router Bits:40mm*3mm

User questions & answers

Question:	Will this fit the wen rotary tool
Answer:	Hello and thank you for your interest in Moen products, The Moen Banbury 5-Spray Handshower, 4" Spot Resist Brushed Nickel includes a standard shower arm cradle for installation. The Moen 3865Epbn Showering Accessories-Basic Eco-Performance Handheld Shower is specified for a wall mounted bracket. The Moen accessories are not interchangeable and are intended for use with the hardware and hose kits provided. Please feel free to call us directly with any future questions or concerns at 1-800-289-6636.
Question:	Does it fit a Tacklife Rotary tool
Answer:	2.0 GPM flow rate to provide a steady water flow

• Package includs:1x Cutting Guide; 4x Drill; 6x HSS Routing Router Bits.
• It is very safe when you are using the Item with it.
• Tough and very good quality.
• Tool Converter Height:48mm; Tool Converter Diameter:60mm; Maximum Depth Adjustment:19mm.

User questions & answers

Question:	Will this work with a Dremel
Answer:	Yes..very easy to use...you will be sorry you did not have one sooner.
Question:	will this guide fit on my Wen rotary tool
Answer:	Comes with a holder—the diameter of the handle is approximately 1 3/4”.

Product description

For years, professional craftspeople have asked “how can I sharpen my own drill bits?” Tormek, a leader in tool sharpening for more than 40 years, has responded with this exceptional DBS-22 Drill Bit Sharpening jig. For use with all Tormek sharpening systems (T-7, T-4, T-3, and Supergrind 2000), it allows you to keep your drill bits sharp and ready to work. The four-facet grind this jig produces is worth discussing, as we feel it’s infinitely superior to the common split-point grind other systems produce. The symmetrical four-facet grinding increases bit life, and allows the freshly sharpened bits to be self-centering, making your work a lot easier. Think about it – no pilot holes or punches needed for precision. Plus, a four-facet grind produces a bit that utilizes less torque and generates less heat (70% less heat) than a conventional bit. Another important aspect is this jig is part of a complete water-cooled sharpening system that will make your entire shop’s worth of tools finely honed, while taking less metal off the tools and bits, increasing longevity. You can buy a stand-alone “drill bit only” machine (like Drill Doctor) that produces the inferior split-point grind, or you can have a professional-grade Tormek system with interchangeable jigs like the DBS-22. For people who love good tools and the exceptional work they produce, the choice is clear.

Keep your drill bits sharp with the help of the DBS-22 drill bit sharpening attachment from Tormek. This attachment is designed to be used with either of Tormek's signature tool-sharpening systems, the T-7 or the T-3. Sharpen any bit between 1/8 inch and 7/8 inch in diameter, and create a four-facet point for exceptional drilling performance and longer bit life. The DBS-22 can be adjusted to a variety of angles depending on the style of your bit.

Sharpen and Restore Drill Bits with Precision

Using this attachment with a Tormek T-7 or Tormek T-3 sharpening system, you can sharpen your drill bits as well as restore worn or broken drill bits to a perfect shape. The system creates a four-facet point that won't walk for optimal drilling performance. A bit with a four-facet point also requires less thrust force, generates less heat, and can bore a round, straight hole with close tolerances. Independent tests have shown that a Tormek-sharpened drill bit can last up to four times longer than a brand-new conventional bit.

Highly Adjustable and Compatible with Different Bits

The DBS-22 attachment can hold drill bits that measure anywhere from 1/8 inch to 7/8 inch in diameter. It can be set at any angle between 90 degrees and 150 degrees, and the optimal clearance angle can be set to 7 degrees, 9 degrees, 11 degrees, or 14 degrees, depending on the bit size and material.

About Tormek

Tormek is committed to providing the best solutions for the sharpening of all types of edge tools. Well grounded in Swedish traditions for advanced innovation, functionality, and quality, Tormek has developed a unique sharpening system that has come to set the standard in modern edge tool sharpening.

Since 1973, problem-solving through innovation has been a strong driving force for Tormek. This has resulted in 13 patents and the widest product range on the market. It includes 16 unique jigs and attachments, each one specially designed to easily achieve optimal sharpness on all kinds of edge tools.

Today, Tormek exports to more than 30 countries worldwide. The products are appreciated by cabinet makers, carpenters, woodcarvers, and wood turners as well as serious chefs in restaurants, industrial kitchens, and households. The Tormek sharpening system is also widely used in professional sharpening businesses.

All of Tormek's product development, engineering work, and production are done in Sweden. The company is located in Lindesberg, a small town in the heart of Bergslagen, an area known for its history in mining. The production is carried out in close cooperation with selected suppliers, all specialized and the best in their fields. This ensures the highest quality and a continuous access to the best and most modern manufacturing technology.

What's in the Box

One base plate, one guide, one setting template, one drill bit holder, one magnifier, and instructions.

From the Manufacturer

With the Tormek DBS-22 Drill Bit Sharpening Attachment you can now sharpen your drill bits with the highest precision. The optimal point and clearance angles can be set according to each drilling requirement, which depends on the drill size and material. You can completely restore worn drills as well as broken drills to a perfect shape. You create a 4-facet point which gives the ideal cutting performance since the chisel edge gets a point instead of being almost flat as on many drills. A 4-facet point will not walk and the thrust force required is considerably reduced compared to a conventional cone point drill. A precision sharpened 4-facet point generates less heat and the life of the drill is therefore also prolonged. Independent tests show that a Tormek sharpened drill lasts up to 4 times longer than a brand new conventional drill bit. By working the laws of physics and cooling the edge continuously, the risk that the steel becomes overheated and loses its hardness or gets micro cracks is eliminated. You have full control all the time and can see how the sharpening proceeds. Parts include a base plate, guide, drill holder, setting template, and magnifier.

• 4-facet point brings the point to a chisel edge that will not walk and bores round, straight holes with close tolerances
• The always equal two cutting edges are sharpened symmetrically and work in perfect unison which prolongs the life of the drill
• Sharpens all point angles between 90 and 150 degrees
• The optimal clearance angle can be set according to each drilling requirement to 7, 9, 11, or 14 degrees
• One drill holder sharpens drill bits from 1/8-Inch (3mm) to 7/8-Inch (22 mm)

User questions & answers

Question:	Can this be used on a belt grinder
Answer:	The shower head has a 2.5 gpm
Question:	Is the grinder included
Answer:	Moen 2 handle shower valve T4111-330
Question:	Can this be used with the smaller 8" wheel T-4? If not, do they make a drill attachment like this for the T
Answer:	I hope this helps...I really like this shower package. Its pretty simple, but it puts out a nice spray that will even get the soap out of your hair.I turned the nozzle to make the stream a little bit stronger, and it provides a nice wide stream of water, not a trickle.
Question:	I know the maximum suggested is 7/8 but at a squeeze could you sharpen a
Answer:	No this is just the head/hand wand. The dial is the valve and comes separate but matching if desired with tubspout and a normal head

Product description

This base of drill guide stand is made of high quality aluminum alloy, the main structure is strong and durable. The angular position can rise to 45 degrees, the base has angle graduations that you can use when adjust angle conveniently.Small size and lightweight, easy to carry, so you can take it anywhere as you need. It is a great accessory for your power drill.for precise hole drilling at given angles.



Specifications:

Material: alloy(base), steel(column), plastic(the other) 

Adjustable Angle: 45 degree

Drill Holder Diameter: 42.5mm/1.6in

Vertical Stroke: 145mm/5.7in

Width: 140mm/5.5in

Total Height: 290mm/11.4in

Weight: 1.1kg(approx.)



Package Includes:

1 x Drill Guide



Note:

1. Please allow small size error due to manual measurement. Thanks for your understanding.

2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

• Adjustable Drill Guide: This Precision Drill Guide adopts with a multi angle design for easy and convenient use, and the angle positions can be adjustable within 0-45 degrees.The angle graduations on the base for convenient angle adjustment, and the rubber pads in the base hold the guide in place, very easy and convenient to operate
• Premium Quality Material; This Drill Guide is made of high quality aluminum alloy,which is anti-rust and corrosion resistance, and the main structure of the drill guide is strong and durable enough for long term service
• GREAT KIT FOR YOUR DRILL :This Multi-Angle Drill Guide can be used for different angles, It is a great accessory for your power drill, It can be used in horizontal, vertical or multi-angle positions, or it can also be used for precise hole drilling at given angles.Guide-bars themselves have springs for a quick return when doing repetitive drilling Drill adapter itself slides up and down on guide-bars
• TOOL HOLDER &CORD MANAGEMENT CLIPS : Holds Tool at 45 Degrees Horizontal for Tasks Such as Polishing Metal Objects, Sanding Different Shapes and Grinding Metal Pieces.Allows Telescopic Adjustment to Any Height Between 16 and 29 Inches. Cord Management Clips for Safe Storage of Power Cords, Inch/Metric Marking on Base - For Accurate Drilling of Workpiece, Depth Markings with Depth Stop - for Consistent Depth, Sturdy Metal Base with 4 Clamping Points - to Securely Hold the Station
• Easy to Carry: This Hand Drill Guide designed within a small size and lightweight for easy carry and store, you can put it in you tool bags at ease and take it anywhere as you need

User questions & answers

Question:	Can I buy it here
Answer:	It fits my wen, my Dremel, and my knock off from wish. So I suspect it will fit yours.

Product description

• Specification: 
  
  
  
  Brand new 
  
  
  
  Tool Converter Height: approx. 48mm 
  
  
  
  Tool Converter Diameter: approx. 60mm 
  
  
  
  Maximum Depth Adjustment: approx. 19mm 
  
  
  
  Max RPM: 28,000 
  
  
  
  Include 4pcs cutters and 6pcs HSS router bits. 
  
  
  
  Keep the rotary tool more steady. 
  
  
  
  Safe to use. 
  
  
  
  Durable in use. 
  
  
  
   
  
  
  
   
• Package included: 
  
  
  
  1 x Cutting Guide 
  
  
  
  4 x Drill 
  
  
  
  6 x HSS Router Bits

• Brand new
• Max RPM: 28,000
• Include 4pcs cutters and 6pcs HSS router bits.
• Keep the rotary tool more steady.
• Safe to use.

Product description

Type: Cutting Guide Attachment Kit

Material: plastic + high speed steel

Inner diameter: 19mm

Outer diameter: 26mm

Tool converter diameter: 60mm; height: 42mm

Drill diameter: 3.175mm

Function: fix drill, dustproof

Application for Dremel electric drill

Package:1 Set Cutting Guide Attachment Kit

• Package included:1x Cutting Guide; 4x Drill; 6x HSS Routing Router Bits.
• Tough and very good quality.
• Cutting guide allows for a sturdy controlled cut with maximum visibility, and has easy depth adjustment.
• Turn on the grinder, keep it rotating into the locator, the grinder can punch accurately. Easily attaches to your rotary tool
• Tool Converter Height:48mm; Tool Converter Diameter:60mm; Maximum Depth Adjustment:19mm.

Product description

Wixey Model WL133 Drill Press Laser

• Thin and precise easy to adjust cross-hairs & Mounts quickly to any drill press
• It is a class 3a Laser with output less than 2.5MW.
• Cross-hairs stay on center at any table or work piece height.
• Rugged steel construction It is a class 3a with output less than 2.5MW.
• Uses 2 AA batteries (not included)

User questions & answers

Question:	can it work on a cnc machine
Answer:	Tormek states that the maximum drill bit size is 22mm so we doubt 57/64th would fit and we don't have that size bit to test it.
Question:	I just received my laser guide. I do not get an X at my drill point. I get V but it turns into an X lower down. Am I not setting it up correctly
Answer:	It does for hobby jobs.
Question:	Will this work with a drill press fence or will the fence block the laser light
Answer:	One answer says yes. That's funny, my WEN rotary tool DOES NOT FIT!!!!! I purchased this on Ebay and it arrived from AMAZON. My WEN tool was purchased locally and had never even opened the box until the router base arrived. BOTH ITEMS BRAND NEW, NEVER USED!!!! SO, WHAT IS THE TRUTH?????
Question:	Does the laser lines blur if the table is lowered? I'm really talking about the crispness of the lines
Answer:	It fits any rotary tool that can use the dremel accessories. Just for you to know: I had to return mine, as the base arrived broken and only the drill bits were included…

Product description

Our goal is to meet your needs.

Please feel free to contact us if there is any problem.

It's honored to make you satisfied.



Product Description:

Product Name:Hand Drill Guide

Material: Carbide

Color: Silver + Green



Specification:

Base installation steps:

1. Fix the spindle to the base and tighten the two screws;

2. Insert the stroke assist ring into the spindle;

3. Insert the drill sleeve into the spindle and tighten the screws to fix it;

4. Installation is complete.

Overall Size: 140x290mm/5-1/2x11-3/7"(WxH)

Itinerary: 145mm/5-5/7"

Rod diameter on both sides: 14mm/5/9"

Base size: 140x22mm/5-1/2x7/8" (DxH)

Black part hole diameter: 14mm/5/9"

Angle range: 0-45°

Overall Size: 2.1 x 1.8mm/ 0.08" x 0.07"(Hole Dia. x Thread Dia.)

Using manual measurements, there may be 1-2mm error, please understand.



Package Contain:

1 x Drill Guides

• Package Included: :1 x Drill-Guide
• Drilling guide is convenient, can be drilled at an angle, woodworking holes, round pipe drilling, smooth wall drilling.
• Material: Carbide;Color: Silver + Green;Angle range: 0-45°
• Overall Size: 140x290mm/5-1/2x11-3/7"(WxH);Base size: 140x22mm/5-1/2x7/8" (DxH);Itinerary: 145mm/5.7"
• Angle can be adjusted as needed, 0-45° inclined hole for easy operation, with fastening drill clamp, no shaking, with auxiliary handle, safer drilling

Product description

Portable Drill Guide for 17 standard drill sizes: (1/8” to 3/8” in 1/64” increments) Covers all the drill sizes in a standard 3/8 drill index except drill sizes smaller than 1/8”. Heat treated for durability like drill bushings. It’s like having a portable drill press anywhere! Straight perpendicular alignment wherever you go. Drill Straight – Every Time!

• 17 drill sizes, from 1/8" to 3/8", in 1/64" increments
• Use on flat surfaces, round parts, and corners
• Special nickel alloyed steel heat treated for durability
• Non-plated material with light oil coating to prevent rust
• Alignment marks on guide to line up on center

User questions & answers

Question:	I have to drill 5 1/2" (1/4" long bit) through the entire width of a 2x6 (outside). how far off will i be (worst case)? hard question, i know
Answer:	Works good. Been using them for many years.
Question:	The description says the tool can be used "in corners." I don't understand how that would be possible. Can anyone shed some light on this
Answer:	Good question! Big Gator Tools STD1000DGNP Portable V-DrillGuide w/17 SAE Hole Sizes. Standard Imperial Fractions (SAE) drill bit sizes of 3/8" drill index—everything from 1/8" to 3/8" in 1/64" increments. -- Big Gator Tools STD2000DGNP Large V-DrillGuide™ w/9 SAE Hole Size. Standard Imperial Fractions (SAE) drill bit sizes 3/8, 25/64, 13/32, 27/64, 7/16, 29/64, 15/32, 31/64, ½". Hope this helps. We have them in stock.
Question:	Can this withstand Dewalt titanium drill bits
Answer:	Good question! You should be getting BIG GATOR TOOLS' STD1000DGNP + STD2000DGNP one each. Hope this helps. We have them in stock.
Question:	If you mark the spot for your hole with a pencil dot, how do you position the guide so that you will be drilling in that exact spot
Answer:	Good questions! Please use the Tap-Guides for tapping... Big Gator Tools MTG500NP Portable V-TapGuide™ -Tap Metric Sizes Handle Tap Metric Sizes: (0-80, 1-64, 1-72, 2-56, 2-64, 3-48, 3-56, 4-36, 4-40, 4-48, 5-40, 5-44, 6-32, 6-36, 6-40, 8-32, 8-36, 8) STI-UNC100SNP STI-UNC V-TapGuide™ - Coarse - sized for ground tap sizes: 10 Unified Coarse Thread sizes (9 holes): 9/16-12, 1/2-13, 7/16-14, 3/8-16, 5/6-18, 1/4-20, 12/24, 10-24, 8-32, 6-32". STI-UNF200SNP STI-UNF V-TapGuide™ - Standard (SAE) - sized for ground tap sizes: (5/8-18, 9/16-18, 1/2-20, 7/16-20, 3/8-24, 5/16-24, 1/4-28, 10-32, 8-36) Hope this helps. We have all the Big Gator Tools Drill and Tap Guides in stock.