14 best clausing drill press

Product description

Remember when power tools were actually powerful? WEN’s 12-inch swing, variable speed drill press with laser centering device, is a powerhouse for your shop. Packed with features that you’ll find in larger more industrial type drill presses. This bench-top, cast iron drill press has the power to drill through metal, wood and other materials. Max drill capacity is 5/8” in 1” thick cast iron. The variable speed feature allows you to target in the exact speed (infinitely from 580-3200 RPM) that works for your project. While you are working you simply move a lever and adjust the speed as needed. No pulleys and belts to change! Our design uses a mechanical variable speed which allows for the same power and torque through the entire speed range. A digital readout powered by LED’s displays the running speed. Constructed with a rigid frame consisting of cast iron: head, table, and base, ensures accurate holes. Its powerful induction motor features ball bearings for an extended life and it all comes together with smooth and balanced performance even at high speeds. The 5/8” chuck with MT2 spindle taper gives you versatility with a variety of bits and features on-board chuck key storage, so you never have to hunt around for it. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. Base has predrilled holes for mounting onto a bench or work stand. Slotted table allows for mounting clamps and vises for effective mounting. The X-pattern laser locks-on to your drill points saving on guesswork and sparing expensive materials. A versatile and valuable tool for any shop especially when you expand its range of use with optional accessories such as mortising attachments, drum sanders, circle cutters, etc. Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. Remember when you could drill with laser precision? Remember WEN. DO NOT use power tools in the presence of flammable liquids or gases. Drill press Base -10 x 16 inches

• Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed.
• Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches
• Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III
• 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2"
• Includes drill press, mechanical variable speed, laser, table roller extension, 5/8" keyed chuck & key, tools for assembly.Drill press Height from the Floor to the top: 37 inch

User questions & answers

Question:	base size
Answer:	It is a lot like a car tire. Solid rubber
Question:	Does the drill press come pre-assembled? If not, how complicated is the assembly
Answer:	nope
Question:	it says 2/3HP how many amps does the motor say on its side 9 amps is 2/3HP what is on the side of the motor what watts or amps is the motor rated
Answer:	Definitely ok to use outside.
Question:	I see the spindle travel is 2" - 3 1/8" depending on model. What does the length in the name (8", 10" or 12") refer to
Answer:	Hello, Thank you for your question. The shelves are removable. Regards Ann

Product description

Remember when power tools were actually powerful? WEN’s 8-inch swing, 5-speed drill press is small but powerful enough to drill through metal, wood, plastics, and other materials. Max drill capacity is 1/2” in 1” thick cast iron. When you need accurate, repeatable holes, this tool will do the job more conveniently and precisely than a hand held drill. The perfect size for the shop and portable enough to take to the job. Constructed with a rigid frame consisting of cast iron: head, table, and base ensuring accurate holes. Its powerful induction motor features ball bearings for an extended life and it all comes together with smooth and balanced performance even at high speeds. The ½” chuck with JT33 spindle taper gives you versatility with a variety of bits. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. The base contains predrilled holes for mounting onto a bench or work stand. The slotted table allows for mounting clamps and vises for effective workholding. Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. Remember when you could drill holes in any material with ease? Remember WEN.

• Includes a 1/2-inch keyed chuck and onboard key storage
• Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
• Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations.Cord Length (ft.):6
• Durable 1/3 HP induction motor develops ample torque and power
• 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right
• Swing: 8 inch. Motor: 120V, 60Hz. Horsepower: 1/3 HP.

User questions & answers

Question:	ease of putting together
Answer:	It's really easy to put together. Just took me round 5-10 minutes.
Question:	What is the maximum width of material you are drilling (from drill center to hitting the pole
Answer:	i think the varied answers come from questions getting sent to people who have purchased different sizes. I noticed some of the reviews are also for other models. This item, the WEN 4208 has an 8-inch swing. So, you can drill the center of an 8- inch diameter object, or about 4- inches from drill center to body. The WEN 4210 & the WEN 4212 have 10- inch swings. Anyone trying to drill the center of a 9- inch wheel would need one of these models. This 4208 is a Great drill for the money. i like that the head can be swung over the edge of a work bench, which allows for drilling into long stock. Like into the bottom center of a 36" post. The beveling work table is another great feature & one i did not have on the press this will replace. If you have the space, consider the WEN 4214 with 12-Inch swing. it is still small enough to be bench top, but you can drill the center of 12- inch/ bowls & table tops.
Question:	Can you rotate the drill press on this unit 90 degrees, so that it hangs off the edge of the workbench, to drill into the ends of longer pieces of stock
Answer:	Yes you can, just be careful when ever you do this.
Question:	does it drill round holes
Answer:	I only drill square holes with mine.

Product features

Powerful. Versatile. Compact.

Remember when power tools were actually powerful? WEN’s 8-inch 5-Speed Drill Press is compact enough to limit space on your work bench but powerful enough to drill through metal, wood, plastics, and more. Drill up to a 1/2-inch hole in heavy-duty cast iron. Its powerful induction motor features ball bearing construction for an extended life, providing smooth and balanced performance even at high speeds. The 1/2-inch JT33 chuck gives you versatility with a variety of bits while the worktable bevels up to 45° left and right. Constructed with a rigid frame and a cast iron head, table, and base, ensure accurate holes and convenient drilling operations every time. Remember when you could drill holes in any material with ease? Remember WEN.

Locking Depth Adjustment

Set the depth adjustment knobs to limit your spindle travel for accurate and repeatable drilling operations.

Beveling Worktable

Bevel the worktable 45° left and right for precisely angled holes.

Onboard Key Storage

Place your chuck key on the attached key storage to make sure it is alway there when you need it.

1/2-inch Keyed Chuck

The JT33 chuck accepts drill bits up to a 1/2-inch in size to meet the needs of a variety of projects.

Product description

BILT HARD 8 in. 5-speed drill press is small but powerful enough to drill through metal, wood, plastics, and other materials. With a full 2 in. of spindle travel, this drill press is the perfect companion for both the job and the garage. 760 1150 1630 2180 3070 RPM 5-speed optional, ensure that it does the job more conveniently and precisely than a handheld drill. The powerful induction motor features ball bearings for an extended life, all culminating in a smooth and balanced performance even at high speeds. Worktable bevels 45 degree left and right for angled drilling. The attached accessories is universal and useful for various applications. BILT HARD aims for quality followed up with quality customer service directly provided by manufacturer. The item is free from defects in materials and workmanship 90 days since purchase. Our support team is on standby for YOU

• Small but Powerful: 8 inch swing, 2 inch spindle travel, 1/2-inch keyed chuck, 2.4A induction motor(1/3 HP), which is mini but mighty enough to drill through metal, wood, plastics, and other materials for both the job and the garage.
• 5 Operating Speeds: Variable speeds (760 1150 1630 2180 3070 RPM) allow you to target in the exact speed that works for your project, it does the job more conveniently and precisely than a handheld drill.
• Compact Construction: The frame of the bench top drill press consists of cast iron to ensure durability and accurate drilling. The worktable can bevel 45 degree left and right for angled drilling. The base contains predrilled holes for mounting onto a bench or work stand. The slotted table allows for mounting clamps and vises for effective work-holding.
• Useful Accessories: 2-1/2 inch jaws open up to 2-1/10 inches, 13 pcs drill bit set range from 1/16 to 1/4 inch, universal and necessary for various applications including but not limited to wood, plastics, and metals.
• Warranty: with CSA Certification, BILT HARD aims for quality followed up with quality customer service directly provided by manufacturer. The item is free from defects in materials and workmanship 90 days since purchase.

User questions & answers

Question:	how big is it. how tall is it
Answer:	The 13” drill press is 41” tall. The 8” drill is 28”
Question:	What is chuck taper
Answer:	a tool to remove the chuck
Question:	Does this come with a chuck
Answer:	Yes
Question:	It says 3/4 horsepower and 1.08 horsepower. Which is it? Which one should I believe
Answer:	3/4 hp. 1.08 kw

Product features

BILT HARD 8-Inch Drill Press with Worklight

• Adjustable table locks in place
• Depth stop with gauge
• Stamped steel base and table
• Table rotates 360° and tilts 45° left and right
• Heavy duty ball bearing motor

1/2 inch Keyed Chuck

It gives you versatility with a variety of bits, Compatible with Drill Bits' diameter from 1/16 to 1/2 inch.

Beveling Worktable

6.29 by 6.29 in. adjustable Worktable bevels can adjust the angle( 45°left and right) for those tricky operations. Loosen the bevel lock bolt with hex wrench. Tilt the table to the desired angle.

5-Speed System

Manually set your speed to either 750, 1100, 1500, 2100, or 3200 RPM by adjusting the belt position on the 2 spindles.

Depth stop with gauge

The easy-to-read, locking depth stop can easily control both downstroke depth and upstroke travel for accurate and repeatable drilling operations.

Product description

Drill straight holes all the time! With the DrillMate you can drill straight or angled holes, drill on the edge of a board or even round stock. The drive shank attaches to your 3/8" Or 1/2" power drill while the keyed output chuck works with most 3/8" drill accessories. The all-metal construction DrillMate provides the precision of a drill press with the ease of a hand drill. Smooth operation and controlled drilling via spring and bearings prevent cutting tool from hitting work piece. Adjustable depth-stop makes repetitive drilling to any depth with near drill press precision. The metal base has a scale with easy to read angles, v-grooves for centering of round materials, and holes for permanent mounting for special fixture applications. Also includes auxiliary handle for controlled movement and rubber feet that give the base a nonslip option.

• Perfect for straight or angled drilling, drilling on the edge of a board or on round stock
• Attaches to all 3/8" And 1/2" Power drills and it also includes a 3/8" Capacity chuck with key
• Angle cuts of 45 Degree to 90 degrees, with a built in angle read out in the all metal base
• Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter
• Adjustable depth stop and spring action control of the head

User questions & answers

Question:	What's the max depth of cut
Answer:	As answered you can get a copy of the manual from Grizzly or from Amazon.http://cdn0.grizzly.com/manuals/w1668_m.pdfandhttp://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000041994.pdfThey are not identical (40 pages on the Grizzly website, and 27 on the Amazon page).On difference is the depth stop. On the Grizzly site it is a jam nut on the depth stop rodon the left side, on the Amazon it is set on a collar lock knob on the spindle on the right side.My drill press has both depth stops, but the spindle does not have the depth label, and is notmentioned in the manual that came with the drill. When using the oscillating sander feature itcould be damaged if either stop is set.
Question:	Does it use Bearings or Bushings for the spindle
Answer:	I'd been wondering this myself... The Stock part on my W1668 is not a belt, but rather a polyurethane o-ring. The closest analogue I could find was here: http://www.amazon.com/dp/B0051Y2LSO/ref=biss_dp_t_asn If you want true OEM parts, you can call Woodstock international at (360) 734-3482 7AM-5PM PST/PDT M-F
Question:	Does anybody know how many inches the stroke is? Thank you
Answer:	Yes. Page 14 of the manual supplied with the drill press says, "The drill chuck is seated to the spindle with a JT-33 tapered surface and a screw."
Question:	What's the diameter of the opening in the base
Answer:	Also..it's a GREAT drill press!

Product features

Milescraft DrillMate

With the Milescraft DrillMate portable drill stand, you can drill straight holes, angled holes, on the edge of a board or even round stock. Everyone knows that the success of many DIY projects depends on drilling straight and accurate holes. Now you can add a whole new level of accuracy with this drill guide jig when drilling holes with your standard hand drill.

All Metal Head

Head is all metal construction that has a hex shank chucks to 3/8" and 1/2" drills. Easy glide bushing in the head, eliminate play and wobble, for precise drilling.

Adjustable Angle Settings

Angle readout for setting drilling angles to 45°, 60°, 75°, and 90°

V-groove

Metal base and three v-grooves for drilling on round stock.

TPE Feet

Non-slip TPE feet prevent slipping and marring on the work surface, that can be removed to mount with screws when needed.

Large Handle

Can be mounted in a fixed position on the base for maximum support no matter what drilling motion you are doing.

Depth Stop

Adjustable depth stop for repetitive drilling.

3/8" Keyed Chuck

Compatible with most 3/8” drill accessories and includes chuck key, which can be store in the TPE feet holes.

Product description

The DEWALT DWE1622K 2" 2-Speed Magnetic Drill Press features a 10 amp motor with 2-speed settings that provide optimal performance in a variety of applications. This press has overload protection electronics which prevent motor damage and excess accessory wear designed for long life. A Quick Change chuck system allows for tool free change between 3/4" Weldon Shank and 1/2" keyed chuck, and the Quick Release feed handles provide tool free change of handles to either side of the tool. The magnetic self feed cooling tank allows the user to regulate the flow of cooling fluid and can be placed on either side of tool or on a work surface to allow for a variety of tool orientations. 4" Drill travel offers maximum capacity for heavy duty applications, along with a motor height adjustment that gives greater range of accessory compatibility. Includes: DWE1622 Drill Press, Safety chain, and Height adjustment tool, Quick change 1/2-in keyed chuck, Kit box

• 10 amp motor, 2-speed settingsl ;No Load Speed : 300/450 rpm
• Overload protection electronics which prevent motor damage
• Quick Change chuck system. Drillpoint Pressure @ 1/2" Steel Plate (12mm) : 741 pounds
• Magnetic coolant bottle can be placed on either side of tool or on a work surface
• 4-3/8 inch Drill travel offers maximum capacity for heavy duty applications

User questions & answers

Question:	What's the biggest hole I caught make with this drill
Answer:	I have this tablet mount. I use it daily, in my Chevy Silverado. I use it for my iPad Pro12”. It works great. Maps at a glance. Hands free....
Question:	what is the max cutting diameter
Answer:	Hi Joe, Thank you for Contacting us. No, it does not have a 17mm ball mount. It has a 25mm ball to 2t adapter.
Question:	Does it have a reverse speed? If not, do you have a different Drill with reverse speed
Answer:	No, it does not
Question:	How loud is it? Say I was drilling into a safe and didn't want anyone to hear me, Hypothetically
Answer:	No, it does not

Product description

Remember when power tools were actually powerful? WEN's 10-inch swing variable speed drill press with laser centering device is a powerhouse for your shop. Packed with features that you’ll find in larger more industrial type drill presses. This drill press has the power to drill through metal, wood and other materials. The variable speed feature allows you to target in the exact speed (infinitely from 530-3100) that works for your project. Simply move a lever and adjust the speed as needed. No pulleys and belts to change. Our design uses a mechanical variable speed which allows for the same power and torque through the entire speed range. A digital readout displays the running speed. Constructed with a rigid frame consisting of cast iron. Its powerful induction motor features ball bearings for an extended life and it all comes together with smooth and balanced performance even at high speeds. The 1/2 in. chuck with JT33 spindle taper gives you versatility with a variety of bits and features on-board chuck key storage, so you never have to hunt around for it. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. Base has pre-drilled holes for mounting onto a bench or work stand. Slotted table allows for mounting clamps and vises for effective mounting. The X-pattern laser locks-on to your drill points saving on guesswork and sparing expensive materials. Remember when you could drill with laser precision? Remember WEN.

• Spindle travel of 2-2/5 in. with easy to read, adjustable depth stop for accurate and repeatable drilling operations
• 8 in. x 7-2/3 in. cast iron worktable features rack and pinion height adjustment and bevels up to 45 degrees left and right
• Laser target your drilling operation marked with an X-pattern display
• Includes drill press, mechanical variable speed, 1/2 in. keyed chuck and key, laser, and tools for assembly

User questions & answers

Question:	The image shows the table with a | • | configuration where some users have posted pictures of an X style configuration. Which should I expect
Answer:	Si
Question:	If I wanted to drill into a piece of vertical stock how long could the piece be and still fit between the end of the drill bit and the base plate
Answer:	Kenra Platinum Color Charge Shampoo is a color extending shampoo that extends color up to 50 shampoos; no parabens, no sulfates, no sodium chloride
Question:	whats the difference between the two 10inch wen presses: 4212 and
Answer:	I'm not sure about red, but I have used Kenra for years and find it to be an excellent, reliable product. I strayed away from it a few times only to be sorry! It does not say "not for red, chemically treated hair, so my guess is it is okay. If not sure, give Kenra company a call. Hope this helps.
Question:	When it advertizes 10 inch what is that referring to
Answer:	No. It has a very light fragrance that doesn't hang around all day, competing with whatever else you're wearing. I highly recommend Kenra products; they've made a huge difference in my fine hair. My hairdresser recommended this shampoo because it is PH-balanced and is the most gentle (it's made for color-treated hair, although mine wasn't color-treated them). I think you'll be happy with it.

Product features

No More Manual Belt Changes

The WEN 10-inch Variable Speed Drill Press easily powers through metal, wood, plastics and more. Drill up to a 1/2-inch hole into heavy duty cast iron with ease. The mechanical variable speed allows you to target in the exact RPM (from 530 to 3100) with the simple turn of a lever while the digital LED readout displays the current speed. The WEN 10-inch Variable Speed Drill Press is constructed with a rigid frame consisting of a cast iron head, table, and base. Its powerful induction motor features ball bearings for an extended life and smooth performance. The worktable bevels 45° left and right for perfectly precise and consistent angles. Slotted table allows for mounting clamps and vises while the X-pattern laser locks-on to your drill points saving on guesswork and sparing expensive materials. Remember when power tools were actually powerful? Remember WEN.

Depth Adjustment Gauge

Set the depth adjustment lever to limit your spindle travel for accurate and repeatable drilling operations.

Mechanical Speed Adjustment

Adjust the speed as needed with a simple move of the lever and receive the same power and torque through the entire speed range.

Beveling Worktable

Bevel the worktable 45° left and right for precise and consistently angled holes.

Digital Speed Readout

The LED screen displays the current speed of the drill press so you know the exact RPM at every moment.

Product description

Forney welding 20857 tap magic Pro cut fluid 4 oz.

• Non-Spray cutting fluid
• Use for tapping, threading, drilling and reaming
• Use on ferrous metals and non-ferrous alloys
• Apply directly on the work surface
• Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!

User questions & answers

Question:	The description says this is pro tap but the picture is of the regular less expensive stuff???? Which is it
Answer:	I have used this product for 35 years are more. The shelf life is a very long time as in several years, after being opened.
Question:	What's the shelf life of this product
Answer:	I don't think this cutting fluid is ideal for drilling plexi-glass, though it will work and will not discolor your material. It is an oil, so clean up would involve something to cut the oil film. Here is a link to a web site that details what drill bits you need to use (standard bits tend to "grab" the plexi-glass) , and they recommend either light machine oil, or just plain water. http://www.bertram31.com/proj/tips/drill_acrylic.htm
Question:	Is this product OK to use on clear acrylic like plexi-glass
Answer:	I've successfully drilled stainless steel burners on a grill with a carbide-tipped drill bit.
Question:	Hello....Would like to know if this product works for stainless steel, drilling and or tapping???...thanks...Bob
Answer:	Neither describes it very well, It isn't so thin it runs away from working area but not so thick you have to use more than necessary. I think it's called capillary action, it moves it self to the work, especially drilling. It is better than a previous product that for some reason skyrocketed the price, like $180. for a quart.

Product features

Forney 20857 Tap Magic 4 oz. Cutting Fluid

Cutting and cooling fluid. Ideal for all cutting regardless of what you cut or how you cut it. This cutting fluid incorporates a heavy-duty, versatile formula that performs incredibly on all metals in any operation. You name it, and Tap Magic can handle it!

Product Specifications:

• Non-spray cutting fluid
• Size: 4 ounces (113.40 grams)
• Completely biodegradable and ecologically safe
• For use on stainless, steel, aluminum, titanium, cobalt, nickel, cast iron, copper, magnesium, bronze, brass and more
• Apply directly on the work surface

Easily cuts through metal

Easy-to-understand directions

Additional sizes include; Forney ITEM# 20858, 16 oz, and Forney ITEM# 20859, 1 gallon

Product description

If you want to set up a drilling station in a tiny room, or add a small, dedicated drill press to a crowded shop, this is the machine for you. Compact and light weight with an 8" swing and 5 spindle speeds this drill press will help you get the job done, whether you're a weekend hobbyist working out of your apartment or a full-fledged craftsperson running a production shop. Made in an ISO 9001 factory

User questions & answers

Question:	What is the Quill travel
Answer:	You mean how far down I can go? If so, 2"
Question:	Can I use a masonry bit to drill holes into bricks using this Drill Press
Answer:	Minimum rpm on the G0925 is 740 rpms. Boring up to 1/2” diameter in soft brick max rpm is 700. Masonry bits 1/2” and smaller cut more efficiently at approximately 500 to 700 rpm. Lower speeds equate to cleaner holes and extended bit life.
Question:	Country of origin
Answer:	This machine is manufactured in China.
Question:	what is the overall height ? looking for one to put on a flip table
Answer:	Fully assembled, I measured 23.5 Height * 15 depth * 9 width

Product description

Milescraft 1097 ToolStand - Drill Press Stand (compatible with Dremel)

From the Manufacturer

Use most rotary tools as a small scale precision drill press. Rack and pinion gearing allows smooth controlled plunge. Scale with depth stop allows depth control and precise repeatability. Sturdy cast aluminum base provides sturdy work area. Stong 13.5 inch metal tube allows drilling of objects up to 5 inches in height. Lock rotary tool in horizontal position for hands free sanding or polishing.

• Sturdy metal head fits most Dremel style rotary tools
• Spring loaded metal rack and pinion gearing for smoothe controlled drilling
• Scale with depth stop allows precised depth control and repeatability
• The steel 13-1/2″ support column of the ToolStand, fits securely into a 6″ x 6″ formed steel base plate whose surface and mounting platforms have been planed to ensure a level work surface
• Lock tools in horizontal position for hands free use

User questions & answers

Question:	I would like to get the Milwaukee m12 tool as the batteries will be useable with other tools. would this work
Answer:	If the M12 does not have a removable chuck cover then I would say no. I believe we had to remove the chuck and then insert the tool then retighten the chuck for the press to operate properly.
Question:	Can the telescopic adjustment mechanism be locked on the shaft for hands-free drilling? I need to have both hands on the work piece
Answer:	yes
Question:	Does the tool change angle under pressure? I have the dremel press, and as you put pressure on the bit, it tends to angle some. Breaks bits
Answer:	In my opinion it does move some. However if at all possible a snap centering punch will give your bit a chance of being able to drill instead of breaking. Might want to check that your bit is tapered at the right angle, if not it will walk all over the place which will cause the bit to break, my opinion. Hope this is some help.
Question:	Does it work with Wen rotary tools such as the 2300 series
Answer:	The tool holding mechanism is very poorly made. I think the assumption they make with the new collett nut that holds the tool in place is that you have a Dremel tool . . . and a later model at that. Universal it isn't! I would look for something made expressly for the Wen

Product features

Milescraft 1097 Tool Stand

Assured Stability and Precision

The Metal Head of the Tool stand holds the Drilling machine in place with utmost firmness ensuring perfectly cut holes. The tool stand gives you the freedom of working on a simultaneous project as the tool stand replaces the hand held operation of the Drill. The Milescraft 1097 Tool Stand is compatible with almost all Dremel-style Rotary tools.

Spring loaded Metal track for controlled drilling

To the ensure absolute control and flawless movement of the drill, The Milescraft 1097 Tool Stand comes with a spring-loaded rack and pinion gearing. For rigorous and continuous cut, the tool stand has an Integral depth stop that can be locked.

Designed to give you ease while working

The Support column of the The Milescraft 1097 column is designed to attach easily to base plate. The cord clip attached to the column ensure you work your way out of your project with ease. The base of the tool stand can be easily detached from the column and cen be kept separately and attached when needed. The feet of the base is made of rubber so that the tools stands in one place while you work.

Product description

Product Description:

This 4" cross sliding vise will easily turn your drill press into a milling machine. With the vise and its precise moving slider, wood and metal parts can be easily processed with high precision and high quality. It can also be connected to a lathe or other tools to fix the workpiece in the exact position required. 

Key Points:

• Durable cast iron construction
• Powerful serrated steel jaws
• Cold rolled steel screws
• 2 swivel crank handles for adjusting vise front to back and left to right
• Bolt down slots for securing
• Hinged vise crank handles drops out of the way
• Designed for woodworking and metalworking 

Product Specification:

• 3.5" throat opening, 5" longitudinal and 3.5" cross travel, jaw width: 4" - Maximum
• Vise and cross slide have adjustable shims
• Cross slides have removable adjusting crank handles 

• Durable cast iron construction, Powerful serrated steel jaws
• 4 Inch Wide Jaw, Cold rolled steel screws
• 2 swivel crank handles for adjusting vise front to back and left to right, Bolt down slots for securing
• Hinged vise crank handles drops out of the way, Designed for woodworking and metalworking
• 3.5 Inch throat opening, 5 Inch longitudinal and 4.5 inch cross travel

User questions & answers

Question:	Does this fit a 8" drill press
Answer:	Base is cast iron. Fairly heavy - decent stability. Infeed and outfeed tables, once adjusted, are very solid and true.
Question:	Will it work on a 9 in drill press
Answer:	Yes - cast iron base. Very solid and stable.
Question:	What is the height to the bottom of the clamp surface
Answer:	Easy? I wouldn’t define it as easy to change the blades but anyone with some mechanical knowledge and patience can do. Yes the blades can be purchased on Amazon.
Question:	Will this fit on this drill press? https://www.amazon.com/gp/product/b005ukglas/ref=oh_aui_detailpage_o00_s00?ie=utf8&psc
Answer:	No

Product description

Bosch introduces another essential and practical piece for your power tools collection with our 12 Volt 3/8 Inch, Two Tool Drill Kit featuring a Power Drill and Impact Driver. Experience our Premium performance to size ratio or power to weight ratio (PS31), which allows for accuracy and precision and PS41 impact driver, which has the shortest head length in its class for compact applications. Keep the power for drilling and fastening needs. Perfect for a mechanical technician, plumber, electrician, DIY projects, and overall professional use. Our cordless drill set, CLPK22 120 (PS31 and PS41), have professional grade power at an incredibly light weight around two pounds. These performance to weight ratio drills make a great tool solution for electricians, plumbers or contractors for ideal over the head drilling or driving. The PS41 has a short head length and powerful torque, meaning this small but mighty unit can be the primary go to tool for the most professional screw driving, removal or drilling applications. The drill kit includes one 12V 3/8" Power Drill Driver (PS31), one Impact Driver (PS41), two 12V lithium ion batteries, one 12V charger (BC330), and one contractor or carrying bag. Perfect for screw driving, screw removal, drilling applications, overhead drilling, and contractors. This drill driver and impact driver drill set combo has two Speeds: 0 350 RPM and 0 1, 300 RPM and 20+1 clutch settings for the PS31 and 0 2, 600 RPM for the PS41. This permits users to make precise torque adjustments for accurate screw driving and drilling. The streamlined drills fit into tight workspaces, with a seven inch head length (PS31). The short length combined with manageable two pound body makes easy packing and jobs in tight spaces with the advanced LED lights for improved visibility especially overhead.

• Power: This Bosch drill kit includes a powerful 12 volt drill driver with up to 1,300 RPM and a 12 volt driver with up to 2,600 RPM
• Compact: The lightweight design of the PS31-2A drill driver is ideal for easy handling in overhead operations and tight spaces and the PS41-2A impact driver offers the precision of variable speed, a light-body, and a short-head length
• Control and visibility: The Bosch cordless drill is easy to handle in tight, narrow spaces, and three integrated LED lights mounted around the head of the driver enable high performance in low-light settings
• Durability: Robust and compact with lightweight design, the drill impact driver combo kit is built to last and backed by a three year protection plan
• Convenient: Drill kit includes: 12V Max 3/8 inch drill driver (PS31-2A); 12V Max impact driver (PS41-2A); 2 batteries, 30 minute charger and soft carrying case

User questions & answers

Question:	Can I charge these batteries with a 240v charger? there would be a problem
Answer:	As others mention, many major tool manufacturers including Bosch offer hex shank drill bits. My guess would be that eliminating the standard drill chuck further reduces the depth of this tool, improving clearance in close quarters. If you REAALLLY need such a chuck to feel complete, small chucks with hex shanks DO exist, can be had for cheap from places like HF. Expect a fair amount of runout with such a solution. Otherwise, consider instead purchasing a sibling product that features a chuck, out of the box.
Question:	Just got this set and the chuck spins extremely loosely. I had an older version that didn’t. Is this normal for this set
Answer:	Yes. At Home Depot they carry drill bits that will work. You need the bits that have the Quick Connect base. If the base of the drillbit is just round, like a dowel, that is the wrong one. They can point you to the right thing at HD, but the answer to your question is yes.
Question:	One person is saying this has 1.5 ah batteries and one says the 2.0 batteries. What ones are they coming with now
Answer:	As another noted, all you need is a simple step-down transformer that somewhat exceeds the power draw - probably a simple 100w unit that you can find on Amazon for not much money at all. As for 50 vs 60 on cycles/frequency, that also does not matter - you charge a battery, and the battery runs the unit. I know all this because I'm an American who has used such tools for years while stationed overseas. I buy the U.S. version on Amazon, and then just use a transformer.
Question:	It's this ps31 driver the same as the ps31-2a
Answer:	I couldn't find the information in the manual. It would be helpful if it were included.

Product features

Designed for Demanding Applications

The Bosch PS41 12 V Max Impact Driver was engineered with the toughest tasks in mind.

Premium Performance To Size Ratio

PS31 has professional grade power at an incredibly light weight of just over two pounds.

Versatile Use

The high torque of the drill to tackle applications in drywall, wood and metal

Long-Term Usage

The Bosch PS41 is able to withstand all the abuse found on professional jobsites.

Product description

The Bosch CLPK27-120 features the PS21 12V Max Two-Speed Pocket Driver and the PS41 12V Max Impact Driver. Both tools are compact with the shortest head length and height in their class and are small enough to fit into tight areas and corners. These well balanced tools are light weight and ideal for continuous overhead work. They also feature a three LED light ring that focuses more light on the work area.

• Power: Despite its small size, the included Bosch PS41 driver delivers 930 in pounds of max torque. The tool can also produce a no load BPM of 0 3,100 and a max 2,600 RPM
• Efficient: Compact but powerful, the PS41 can cover 80 percentage of standard size impact driver applications
• Torque: The included Bosch PS21 pocket driver delivers 265 inch pounds of max torque. It offers two speeds, 0 350 RPM and 0 1,300 RPM allowing users to match speed to the application
• Tough: Both included tools are compact and lightweight with enough Power to take on professional driver applications
• Control: Along with power and speed, users can expect more control with this combo kit. Both tools feature variable speed triggers for matching speed to the application

User questions & answers

Question:	Can these batteries be charged while detached from the drill
Answer:	I believe it's made in China, India, and possibly UAE from what I read. I ordered/got it and it looked used, so sent it back (greasy, scratched, hair, dust, definitely Not New). Vendor said they all look like that. Only 1 year warranty and you have to dig that up, supposed to register it, and in my case, registration was totally in Chinese. I surmise that Bosch Germany has allowed other countries to manufacture and sell certain pieces under their brand. Bosch, over years, is known as an outstanding brand. I bought DeWalt's gyroscopic 8V Max cordless.
Question:	Is the drill 3/8 " and impact
Answer:	No-load speed is 360RPM
Question:	Im looking to buy Drill bits and more options for flat heads/philips. what kind should I buy?? I've heard horror stories of people getting wrong type
Answer:	No, the [Bosch Go] series batteries are all built-in, not adapted to general 12V/18V batteries. Micro-USB charging cable is included for easy charging on most daily device.
Question:	It doesn't mention the LED light....do they both have the lights that illuminate when drilling
Answer:	I'm just guessing but, I'm thinking it has something to do with who and where this company does business.

Product features

Bosch CLPK27-120 12-Volt 2-Tool Combo Kit

The Bosch CLPK27-120 features the next generation PS21 12-Volt max 2-speed pocket driver and the PS41 12-Volt max impact driver. Both tools are compact with the shortest head length and height on the market and are small enough to fit into tight areas and corners. These well-balanced tools are lightweight and ideal for continuous overhead work. They also feature a new and improved three-LED light ring that focuses more light on your working area.

Includes

PS21 2-Speed Pocket Driver, PS41 Impact Driver, 12-Volt Max Lithium-Ion Batteries, Charger, Bits, Jobsite Bag

Compact Size, Big Power

The PS21 supplies up to 265 in/lbs of torque – that's twice as much torque as the nearest competitor – so users can drill through wood, 22-gauge metal, plus quickly fasten or drive nuts, bolts, and screws.

Control the Job

With a 5.6-inch head length and weight of only 1.8 lbs, the Bosch PS21 has optimized balance and control and is ideal for working in small spaces and overhead. It’s easy to switch between a low gear of up to 350 RPM to a high gear of up to 1,300 RPM with 20 clutch settings to ensure ideal torque settings for the application. The Bosch PS21 is equipped with a variable-speed trigger that helps users ease into the desired speed for optimum control in drilling and driving.

Small Size With a Big Impact

The Bosch PS41 12V Max 1/4-inch Hex Impact Driver features a compact build with a head length of 5.4 inches, making it ideal for fitting tight areas and narrow corners. Weighing in at 2 pounds, the PS41 is well-suited for continuous overhead work.

All the Features You Need

As powerful as it is compact, the Bosch PS41 Impact Driver packs a punch with high torque at 930 in/lbs. That power covers up to 80 percent of impact driving applications. The impact driver offers 2,600 RPM and a variable-speed trigger for complete control. An easy-to-read fuel gauge and a three-LED light ring for use in low-light conditions, make this impact driver user friendly. An ergonomic soft handle provides extended comfort and control, while bumpers on the side of the tool protect the work surface and prevent hand slipping.

Product description

It's a drill press, tool holder and flex shaft holder all in one. Drill accurate perpendicular and angled holes. Holds your tool in place for applications like sanding and buffing, and the telescoping flex shaft holder extends to any height between 16 and 29 inches.

• Articulating Drill Press- Drills Perpendicular and Angled Holes in 15-degree Increments, up to 90 Degrees Horizontal
• Tool Holder- Holds Tool at 90 Degrees Horizontal for Tasks Such as Polishing Metal Objects, Sanding Different Shapes and Grinding Metal Piece. Drill Depth- 2 Inches
• Flex Shaft Tool Stand- Allows Telescopic Adjustment to Any Height Between 16 and 29 Inches, Crow's Nest Provides On-board Storage for Drill Bits, Wrenches, and Other Dremel Accessories
• Cord Management Clips - for Safe Storage of Power Cords, Inch/Metric Marking on Base - For Accurate Drilling of Workpiece, Depth Markings with Depth Stop - for Consistent Depth, Sturdy Metal Base with 4 Clamping Points - to Securely Hold the Station
• Compatible with Dremel Rotary Tool models 100, 200, 275, 285, 300, 395, 398, 400, 800, 3000, 4000, 4200, 8100, 8200, 8220

User questions & answers

Question:	Hi! Can you suggest a SPECIFIC vise for this, to hold an object in place for drilling? Does ANY vise fit, since this stand appears to swivel
Answer:	try: Wood craft--(Wood River} 4" drill press vise: {Micro Mark} --2 1/4 " quick draw vise: (Dremel} --Multi vise # 2500 Good Luck
Question:	Will the Dremel 8220 fit the 220-01 work station
Answer:	I called Dremel and confirmed that the 8220 will fit the 220-01 work station.
Question:	What do you need to do wet drilling into rocks and semi precious gems
Answer:	You need a small tray Dutch as a small frozen meal comes in and a price of leather or cardiology or thin price of wood to put under the stone to keep from drilling through the tray. This is what I use the press tor and am happy with the results.
Question:	will it work with the Dremel
Answer:	Yes: The Dremel 4200 is listed for Dremel Rotary Tools to be used in the Work Station. Good Luck

Product features

Work Station: 220-01

Flex Shaft: 225-01

A true must-have accessory for all hobbyists and do-it-yourselfers, the Dremel 225 Flex Shaft Attachment has a flexible, 36-inch shaft that attaches easily and adds an improved level of versatility to your project capabilities.

Work Station: 220-01

Ideal for crafts, hobbies, metal working, and a variety of around-the-house jobs, the 220-01 Dremel Work Station transforms any Dremel rotary tool into a tabletop drill press. It can be bolted on to your workbench, and it has the versatility to operate as a tool holder, flex shaft holder, and drill press.

Plunge Router: 335-01

Turn your Dremel rotary tool into a mini plunge router and cut perfect decorative edges, straight slots or rout freehand. Plunge feature lets you start your cut in the middle of your work piece.

Shaper/Router Table: 231

Gain the flexibility and precision you need to shape, detail, and sand a variety of soft and hard woods with the Dremel 231 Shaper/Router Table.

Detailer's Grip: A577

The handy Dremel Detailer’s Grip attachment is a quick and easy to use extra support for any rotary tool having a threaded nose piece. It transfers the weight of the tool to the palm of your hand for improved tool balance and control.

Sanding/Grinding Guide: A576

Stabilizes a handheld tool by providing an edge guide or serves as a work platform when the tool is mounted in a secure position.

Shield Kit: A550

Increased comfort from debris and sparks during cutting, grinding, sanding, and polishing applications.

Sharpening Kit: A679-02

Give your go-to tools a new lease on life. The A679-02 Sharpening Kit includes three of our most-popular attachments: the Dremel chain saw sharpener, lawn mower sharpener, and garden tool sharpener.

Multipurpose Cutting Kit: 565

Allows for sturdy controlled cuts in a variety of materials; including drywall, laminate, fiberglass, plastic and vinyl siding.

Tile Cutting Kit: 566

Turn your Dremel tool into a high-powered rotary tile cutter. Ideal uses include cutting around fixtures or plumbing during bathroom or kitchen tile installations and creating mosaics.

Not appropriate for cutting floor tiles.

Grout Removal: 568

Get the grout out and make re-grouting a breeze. With our grout removal attachment, you can turn your favorite Dremel rotary tool into a powerful, electric grout removal machine. Best of all, the attachment's unique shape keeps the bit at the perfect cutting angle and keeps it centered between the tiles.

Right Angle: 575

Enhances the versatility of your Dremel rotary tool by allowing you to get into hard-to-reach areas. Whether you're drilling, grinding or cutting, all sorts of hard-to-reach areas become instantly accessible with the Dremel 575 Right Angle Attachment.

Mini Saw: 670

A unique, innovative rotary tool accessory that allows you to cut through wood and wood-like materials as never before.

Circle Cutter and Straight Edge Guide: 678-01

The simple way to cut circular holes in many types of materials. Convenient measurement guides in both inches and centimeters, so you can out the right-sized circle every time.

Dust Blower: 490

Offers an innovative solution for improving visibility when using your Dremel rotary tool. By removing fine debris from your line-of-sight, our small air blower is great for detailed projects, sanding, engraving, and carving.

Multi-Vise: 2500-01

Helps you secure your project or free up a hand for extra control when using your Dremel rotary tool. The removable cushioned jaws help protect delicate work pieces while providing a firm, steady grip.

Product description

Nickel thumb grip styles increase leverage and user comfort, soft steel handles limit the potential for dangerous fracturing under excessive load, self-ejecting models with spring-loaded ejectors ensure key disengagement after tightening, never apply extensions, pliers, wrenches or 'cheaters' Of any kind to chuck key handles, do not subject chuck key handles to hammer or other impact blows

From the Manufacturer

The Jacobs K3C Thumb Handle Chuck Key with 5/16-Inch pilot size can be used for Jacobs 34-33C and 633C chucks. The Jacobs K3C is equipped with Nickel thumb grip styles to increase leverage and user comfort, while the soft steel handles limit the potential for dangerous fracturing under excessive loads. Each Jacobs K3C Thumb Handle Chuck Key includes a one year factory warranty. The Jacobs K3C Thumb Handle Chuck Key is a part of Jacobs comprehensive selection of precision crafted keys to meet any need.

• Nickel thumb grip styles increase leverage and user comfort
• Soft steel handles Limit the potential for dangerous fracturing under excessive load
• Self-ejecting models with spring-loaded ejectors ensure key disengagement after tightening
• Never apply extensions, Pliers, wrenches or 'cheaters' Of any kind to chuck key handles
• Do not subject chuck key handles to hammer or other impact blows

User questions & answers

Question:	Will this fit a jacobs dc8k33 no 33 taper chuck
Answer:	No
Question:	I have a Golden Goose JT33 13mm Jacobs chuck for my woodturning lathe. Will this chuck fit it
Answer:	Yes, all three in different colors. They were alot bigger than i had anticipated. I love them
Question:	I have a Jacobs Chuck 0 to 1/2 34-33c33taper what key wil fit this
Answer:	I just checked, and it looks like you can. The hanger mount is smooth, not rigid, which is okay because it works well with the hardware that comes with it.
Question:	Wow! A key that is 13.1 lbs! I've never seen a drill press key that weighs that much. Wonder how they get a13.1 lb key into a 3.2 oz shipping wt
Answer:	Yes they are!