13 best wood turning lathe

Product description

Remember when you could turn your own pens? Fill your house with as many pens as you can with the WEN 8-inch by 12-inch variable speed mini wood Lathe. Adjust the variable speed anywhere from 750 to 3200 rotations per minute. The WEN 8-inch by 12-inch variable speed Benchtop wood Lathe features an MT1 spindle and Tailstock taper to tightly grip workpieces, two tool rests (4-1/2 inch and 7 inch) to provide needed support for chisels and tools during operation, and a 3.2-Amp motor to keep things turning. The easy-to-use Lever clamping system makes adjustments to both the tool rest and the Tailstock simple and precise. The WEN wood Lathe also includes a flat wrench, a headstock spur center, A Tailstock cup center, A knockout rod and a 2.3-Inch faceplate for non-spindle work pieces. And, because its a WEN product, your Lathe comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line. Remember when you could turn pens, chess pieces and more? Remember WEN.

• Perfect for pens, bowls, cups, chess pieces, and other small workpieces
• Fits workpieces up to 12 inches long and 8 inches wide
• 3.2-Amp motor provides over 50% more power than most 8-inch wood lathes
• Adjust the soft start variable speed motor anywhere from 750 to 3200 RPM
• Features a 2.3-Inch face plate, an MT1 spindle and tailstock taper, and two interchangeable tool rests

User questions & answers

Question:	Anybody know the thread size for the three tapped mounting holes on the underside of the lathe
Answer:	From their website: Benchtop mounting bolts: 0.30 Inch x 20 TPI (M8 x 1.25 pitch)
Question:	can you use a dedicated pen drilling chuck on this on this model 3420 or will it burn up the motor. I want to drill my blanks with it to
Answer:	I use a drilling chuck for all my pen blanks. As suggested, drill slowly, and frequently pull out the drill to remove shavings, as the blank may overheat and split.
Question:	How long did it take for you to get it? Says it ships in 2 months, with Prime
Answer:	When bought this lathe, they sent me 2. That being said, I got it when they said I would get it.
Question:	I'm interested in buy this lathe, does it run with 220 v or 150v, here were I'm living we run only 220. Waiting for answer, regards
Answer:	110

Product features

WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe

You will now easily be able to fit work pieces up to 12 inches long and 8 inches wide with the WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe. The minimal design is ideal for pens, bowls, cups, chess pieces, and other small work pieces. You will be able to take on larger projects around your home with this tool.

Straightforward, Sturdy and Easy to Operate

With a stunning build quality, the WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe provides sturdy frame for various work pieces. Made from cast iron, features a 2.3 inch face plate, an MT1 spindle and tailstock taper and two interchangeable tool rests for added versatility.

Product description

Ideal chisel kit for turning pens pepper mills spindles bowls and lots more woodturning projects of all sizes Each chisel measures 16-1/4" in length with a 6-1/4" M2 High Speed Steel blade and a 10" hardwood turned handles Set includes chisels 3/16" Parting Tool 5/8" Spear Scraper 1" Skew Chisel 5/8" Skew Chisel 5/8" Round Nose Scraper 1/2" Bowl Gouge 3/4" Spindle Gouge 7/8" Roughing Gouge Includes wooden case for storage and carrying Great for woodworkers woodturners and penturners of all skill levels

From the Manufacturer

We have assembled this 8-piece set to satisfy the majority of your turning needs. It is suitable for turners of all skill levels. It is the ideal kit for turning small pens, spindles, bowls and larger projects. The M2 High Speed Steel 5-1/4-Inch blades outlast high carbon steel 6-to-1 and will give you years of use. The set includes 8 essential chisels: 3/16-Inch Parting Tool, 5/8-Inch Spear Scraper, 1-Inch Skew Chisel, 5/8-Inch Skew Chisel, 5/8-Inch Round nose scraper, 1/2-Inch Bowl Gouge, 3/4-Inch Spindle Gouge, 7/8-Inch Roughing Gouge. It also comes with beautifully turned 10-3/4-Inch hardwood handles in an attractive wood display box

• Ideal chisel kit for turning pens pepper mills spindles bowls and lots more woodturning projects of all sizes
• Each chisel measures 16-1/4" in length with a 6-1/4" M2 High Speed Steel blade and a 10" hardwood turned handles
• Set includes chisels 3/16" Parting Tool 5/8" Spear Scraper 1" Skew Chisel 5/8" Skew Chisel 5/8" Round Nose Scraper 1/2" Bowl Gouge 3/4" Spindle Gouge 7/8" Roughing Gouge
• Includes wooden case for storage and carrying
• Great for woodworkers woodturners and penturners of all skill levels

User questions & answers

Question:	Do i need to have a high speed bench grinder or slow speed
Answer:	Slower is better than higher. Try not to use a wheel that is lower than 80 grit. 100 seems best. If you go up to high, you end up heating the tool too much.
Question:	are these benjamins best
Answer:	Yes, these are the Benjamins Best tools. I'm enjoying them very much.
Question:	What type of grinding wheel should I use to sharpen these chisels, being made with M2 High Speed Steel
Answer:	For scrapers and gouges, I use a belt sander. For skews and bedans I use a wet stone grinder. I use a polishing wheel with emery compound to hone all my blades between sharpenings.
Question:	Are these "Benjamins Best" (as recommended by Wood Magazine)? Description doesn't say
Answer:	My set has "Benjamins Best" stamped right on the handles.

Product features

HSS Wood Lathe Chisel Set

We've assembled this 8 piece set to satisfy the majority of your turning needs suitable for turners of all skill levels. An ideal kit for turning pens or much larger projects on lathes of any size. The set includes 8 essential chisels with beautifully turned hardwood handles packaged in a practical and attractive wood display box.

Product description

JET JWL-1221VS 12"x21" Variable-Speed Wood Lathe (719200)

• VERSATILITY: 24 integrated indexing positions.
• CONVENIENCE: Easy-to-reach controls and DRO.
• OPTIMAL SPEED: Choose from 60 to 3,600 RPM.
• INNOVATION: Ratchet-style belt tension system (patent pending).
• ON-BOARD STORAGE: Two handy tool caddies.

User questions & answers

Question:	Will 1221 tail stock accept #2 Morse taper drill chuck
Answer:	Yes! Just be sure that the tail stock hole and morse taper are clean, otherwise the #2 morse taper can be difficult to remove...
Question:	has this lathe have a indexing head
Answer:	William, yes this lathe has an indexing head. I have not yet used the feature but it is done with a spring loaded pin which you lock into anyone of 24 positions. The spring loaded pin in screwed in once the pin is set to hold it in place.Rich F
Question:	Is this Ron Swanson approved
Answer:	Yes, Ron personally blesses each unit as it’s loaded onto a truck.
Question:	Do you need to move a belt to change speeds? Or is there a dial or switch
Answer:	This lathe has a variable speed controller, so the speeds may be changed using the simple rotating knob. To provide speed ranges to suit any situation, especially for the more experienced turner, there is a three step pulley. This arrangement allows the variable speed controller to adjust speeds from 60 to 900 rpm on the low step of the pulley, 110 -1800 rpm on the 2nd step (medium), and a high speed range of 220 -3600 rpm on the the 3rd step. The belt need only be changed if you want to move to a different range of speeds. This is a very simple process.

Product features

JET 12'' X 21'' Variable Speed Wood Lathe - JWL-1221VS

The JET 1221VS lathe is different from anything we’ve made before. In truth, it’s different from anything that anybody has ever made before. The design is better. The features are better. The entire turning experience is better. And it all focuses on one concept … Control.

Product description

Carbide Tip Turning Tools Dimensions:

Overall length: 17”/430mm，Bar length:6.7"/ 170mm，Handle length:10.23"/260mm，Handle diameter：1-1.25"/26-32mm

Packing List：

1 pc Carbide Tipped Rougher Tool – Square 15x15x2.5mm R50°

1 pc Carbide Tipped Detailer Tool – Radius Diamond 10x28mm

1 pc Carbide Tipped Finisher Tool – Round 12mm x 2.5mm -30°

2 pcs Square Carbide Insert 14x14x2.0mm

2 pcs Diamond Carbide Insert 10x28mm

2 pcs Round Carbide Insert 12mm diameter x 2.5mm -30°

4 pcs Screws 4x8mm for round and diamond inserts

2 pcs Screws 6x8mm for square and radius square inserts

3 pcs star key wrench

• ✅ CARBIDE WOODTURNING TOOLS - Our lathe turning tools has greatly simplified wood turning, This set of carbide lathe tools is ideal for turners at any skill level, making woodturning fast and more enjoyable. Each lathe chisel features a carbide tip with multiple sharp edges that can be rotated several times, Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood.
• ✅ CARBIDE TURNING TOOLS SET - Premium quality CNC machined from ½” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor
• ✅ ERGONOMICS TOOL HANDLE - Hard and Solid beech wood，Ergonomics design makes it more comfortable while doing turning job. Unlike the aluminum handle wood turning tool on the market which comes with only one handle, which means you have to change out the bar every time you want to switch tools.
• ✅ WOODTURNING TOOLS & ACCESSORIES - Set includes 3 turning tools : rougher tip – Square 15 x 15 x 2.5mm R50, detailer tip – Diamond 10x28m with Radius point , finisher, with extra sets of carbide inserts. Set comes with extra replaceable carbide insert: 3 Sets of indexable Replacement carbide inserts (2pcs Square14 ×14 × 2.0mm，2pcs Round 12 × 2.5mm-30°, 2pcs Diamond 10×28mm with Radius Point) and 3 torx star tip wrenches.
• ✅ SATISFACTION GUARANTEE - Our number one priority is customer satisfaction! If you aren’t happy with your wood turning carbide tool set we offer a no questions asked, 100% money back guarantee.

User questions & answers

Question:	Do you offer replacement carbide tips
Answer:	There are 6 pcs extra carbide tips come with the set, but separate carbide inserts pack (same 6 pcs) will be listed soon on amazon in next month, we will update the purchase info on this page.
Question:	Do you also have a bowl gouge for wood turning
Answer:	Hi , currently we only sell 3 piece set , but we will list more wood turning tools in this year! please add us to your wish list or shopping list so you can find us later . Thank you !
Question:	I need the detailer can I purchase it separately? Do you have other items
Answer:	Hi, Thank you for your interest in our carbide lathe tools. Currently we have only 3 piece set. As you can search on amazon, our price is very competitive, but without comprising on quality ( return the tool set if you are not happy with it) the set includes replacement inserts as you will always need them if you use the carbide tools.
Question:	I need negative rake inserts as well. What size do i need
Answer:	Hi, currently we don’t sell negative rake inserts. If you want to turn the synthetic material like resin or acrylic, simply raise your tool rest so that the cutting edge of the insert is about 1/8 inch above center, present your tool to the blank at a slightly downward angle. Or, Use a roughing gouge till the very end then use carbide for finish cuts.

• 【1/2 HORSE POWER MOTOR】- 1/2 Horse Power motor, Voltage: 120V. The powerful  motor starts softly offering motor's maximize safety and low noise.
• 【4 GRADE SPEEDS】- The adjustable belts can be adjust with ease and accuracy within 3400 RPM, 1100, 1600, 2300, 3400prm available.
• 【LARGE WORK CAPACITY】- 40" (1000mm) distance between centers, Cutting Diameter 14" (350mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.
• 【SOLID STEEL CONSTRUCTION】- Solid steel constructed wood lathes for durability and strength, providing increased stability and smooth operation, reducing vibration.
• 【FREE WRENCHES & CHISELS】- 3 wrenches are for easy using and maintainance. 3 chisels for free also, 1 x Skew Chisel, 1 x Shear Scraper and 1 x Spindle Gouge.

User questions & answers

Question:	Can you do aluminum
Answer:	It was not be cost effective because you would need too many attachments. You’d have to modify the tool rest. It would turn it but you couldn’t hold the tool to turn it without modifications. There are lathes out there built for using with aluminum. Hope this helps
Question:	Will the wen la4444 4-inch 4 jaw self centering chuck set with -inch x 8 tpithread fit this lathe
Answer:	https://www.amazon.com/gp/product/B000KI8CBQ/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 This is what you need
Question:	does this brand and model come in 220 volt
Answer:	Only 110 volts
Question:	What are the minimum and maximum clamping measurements
Answer:	0 to 40 inches

Product features

Powerful Motor

1/2 Horse Power motor, Voltage: 110V, starts softly to offer motor's maximize safety and low noise design.

Variable Speed

Optimally designed speed ranges of 1100-3400 RPM variable speed.

Large Work Capacity

40" (1000mm) distance between centers, swing over bed 14" (350mm). High concentricity.

Accurate & Stable

Steel constructed mini lathes is of increased stability and smooth operation.

7W LED Work Light

3 wrenches are for easy using and maintainance. 3 chisels for easy carving work.

Wide Application

Wood turning lathe, an ideal tool for various operations such as cutting, sanding, knurling, drilling, or deformation.

14 in. x 40 in. Wood Turning Lathe & Variable Speed 3400RPM

Our 14 in. x 40 in. Variable Speed Wood Turning Lathe features variable speed 1100-3400 RPM, a 1/2hp motor. Soft startups ensure safety to both workpieces and the motor. Precise design is perfect for high speed sanding and polishing of finished work.

Product description

Remember when you could turn bowls, cups, chess pieces, table legs and more? It’s time to turn some heads with the WEN 12-Inch by 18-Inch Variable Speed Wood Lathe. Boasting a 4.5A motor, this beast handles wood up to 18 inches long and 12 inches in diameter. If you need to take on anything larger, the WEN 3424EX Bed Extension can be purchased separately to increase the maximum capacity from 18 inches all the way up to 41 inches. Adjust the variable speed anywhere from 450 to 3500 rotations per minute with the onboard digital speed display illuminating the current RPM. The WEN Variable Speed Wood Lathe also features an MT2 spindle and tailstock taper for compatibility with all your favorite chucks and centers, along with a spacious 8-inch tool rest to provide support for your chisels and tools. The easy-to-use lever clamping system makes adjustments to both the tool rest and the tailstock simple and precise. Soft startups prevent damage to both your workpiece and your motor. And, because its a WEN product, your lathe comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line. Remember when you could turn heads with your woodturning? Remember WEN.

• Adjust the variable speed anywhere from 450 to 3500 rotations per minute
• Attack workpieces up to 12 inches wide and 18 inches long
• Soft startups prevent damage to both your workpiece and the 4.5-amp motor
• Includes a digital speed display, an 8-inch tool rest, a face plate, a live center, a spur center, and a two-year warranty
• Increase the capacity to 12 x 41 inches with the WEN 3424EX Table Extension (sold separately)

User questions & answers

Question:	Why is there a forward and reverse button on it
Answer:	There is a forward and reverse button on the model 34034..
Question:	Is it reversible
Answer:	No. Just variable speed.
Question:	multi directional
Answer:	No this is not multi directional
Question:	Does this tilt so you can make bigger projects than a 14in
Answer:	I have no clue what you mean by does it tilt. Probably Bc I'm not a woodworker, but I do know the end peice comes off and u could potentially make something bigger but you would need to find a way to stabilize the other end. Also, I'm turning plaster and once I go longer than 9in the machine will shutter. Hope this helped.

Product description

1/3 Horsepower bench top lathe with variable speed motor

• Motor: 1/3 HP, 2 Amp, 110V, Single-phase, 60 Hz
• 12-inch distance between centers
• 8-inch swing over bed
• Cast iron construction and infinitely variable speed control
• Includes two tool rests

User questions & answers

Question:	I have a chuck that is 1"-8tpi female thread (nova 48111), it doesn't fit on this lathe. what adapter should i buy
Answer:	Buy a 3/4" 16 TPI to 1" 8 TPI adapter. If you further questions go to http://www.woodturningz.com/downloads/w1704_ds.pdf for the specs on this machine.
Question:	is there an adapter for the face plate for mounting live center chucks? I bought one but won't line up with holes
Answer:	I'm not sure if they make the adapter to mount on the face plat. I have a 2" diameter three jaw,self centering scroll type chuck that i bought from Amazon that ihave used that works great,but i think that the holes in the face plate is for mounting a backing block to the piece of wood stock to turn a bowl. It says in the manual that you glue the block to the wood your turning and use the holes to screw the block on to face plate. Hope this helped.
Question:	What size wood stock can it hold? How about something like 12'' long by 8" wide piece of wood
Answer:	The length it will hold will be dependant upon what chucks you have in the head and tail stock. The bulkier the chucks, the shorter the length it will handle. I'd say it will hold 12" lengths unless your chucks are sizable. I wouldn't try more than 4" width stock unless it was short. Although the lathe may hold the stock, it would be too much for the motor. The intended purpose of this lathe is to make small things like ink pens, Christmas ornaments, small toys like tops or yo-yo's and tool handles etc. If you want to mount 12" X 8" stock you should be looking at full sized lathes.
Question:	is there anyway to secure to a bench
Answer:	Yes. It has has three holes in the base that you can bolt it down with. I bolted mine down on a metal stand. It holds it down real solid. Mine is the Shop Fox W1704 also. It is well built. I really like mine. Hope this helps!

Product features

Shop Fox W1704 Benchtop Wood Lathe

Tackle pen turning or other small cutting or shaping projects using the Shop Fox W1704 bench-top lathe from Woodstock International. Made of cast iron, and designed to fit neatly on a workbench, this lathe features a 1/3-horsepower, variable-speed motor and delivers spindle speeds between 700 and 3,200 revolutions per minute (RPM). It also features a safety paddle switch, an MT No. 1 spur center, an MT No. 1 live center, 4-1/4-inch and 7-inch tool rests, a 5-3/4-inch faceplate, and a 3/4-by-16-inch TPI RH spindle.

Includes Two Tool Rests

The W1704 includes both a 4-1/2 and 7-inch tool rest for various turning applications and with a 13-inch distance between centers and an 8-inch swing over the bed this lathe is ideal for a variety of turning projects.

Variable Speed

The infinitely variable speed from 700-3200 RPM comes in handy when turning hard or soft species of wood.

5-3/4-inch Faceplate Included

This benchtop lathe includes a 5-3/4-inch faceplate which threads onto the headstock spindle for non-spindle turning (usually used for making bowls or other items that cannot be supported from the tailstock).

Product description

This set consists of three different Woodturning Bowl Gouges with a Superflute style shape. All bowl gouges are made from High Speed Steel. Hurricane Turning Tools are made in one of the world's largest turning tool factories. They are made out of M2 High Speed Steel for superior edge holding ability and will last 8X longer between sharpenings as compared to carbon steel. In addition to the high quality steel, Hurricane Turning Tools have extra long handles, some as long at 16 inches. The handles are made from solid Ash. These tools compare with any HSS tool on the market and are sold throughout the world. Compare these tools to others that sell for two to three times the price. Ships ready for you to sharpen.

• Contains Three Separate Hurricane Bowl Gouges
• 1/4" Bowl Gouge, (3/8" Bar Stock), 3/8" Bowl Gouge, (1/2" Bar Stock), 1/2" Bowl Gouge, (5/8" Bar Stock)
• Made from High Speed Steel (HSS), Last up to 8X longer than Carbon Steel

User questions & answers

Question:	What is the HRC of the tools
Answer:	China
Question:	What are the dimensions? How long is the handle? How long is the tool
Answer:	Honestly looked like a U, but very shallow, nearly a spindle gouge. I returned this one becu I didn't feel safe turning face grain with it.
Question:	looking at the technical details it looks like there are 3 gouges and only one handle. is that correct
Answer:	It comes with a standard grind. However, you can grind it into a fingernail grind yourself.
Question:	PLS advise can you ship them to London, UK
Answer:	The shape of the flute on my 1/2" bowl gouge strikes me as more V-shaped than U-shaped.

• These high quality carbide turning tools are American made by Harrison Specialties in Ramsey, Minnesota, a family owned CNC machining and manufacturing company.
• Easy tool selection with color coded solid aluminum handles. Each CNC machined powdercoated turning tool handle is 1-1/8" outside diameter by 12" overall length.
• Carbide turning tools feature ultra-sharp replaceable tips, which have multiple sides that can be rotated. Replacing or turning the cutters is easy with the included Torx wrench. No more tool sharpening.
• Designed with a 3/8" square shaft making it easy to keep tools flat on the tool rest. Overall turning tool length is 9".
• Greatly simplifies woodturning with no need for any sharpening equipment.

User questions & answers

Question:	Does this set come with cutters
Answer:	Yes, cutters are installed on the tools. They are ready to begin turning right out of the box. Thanks!
Question:	Is there a way you can buy just one of these tools and not the whole set? I have two of them already
Answer:	Yes, each of these tools are available separately
Question:	Were do you get replacement tips
Answer:	We sell a three pack of cutters for this set - search amazon for item B011PRWZKO. You can also purchase them individually if you do not need all three (items B00BL86CMU, B01IBVMA8O, B01IBU9Z0G). Please look for authentic replacement cutters for Simple Woodturning Tools mid-size tools. The tool engraving will help you determine which cutter will fit. (for example, tool engraved with MSTH will accept the "cutter for MSTH). I hope this helps. Thanks for your question!
Question:	Where can I find negative rake replacement tips for these
Answer:	You can get the replacement cutters from the same company. You can also order the Negative rake cutters from Easy wood tools

Product features

The Mid Size Simple Turner and Hollower - Simple & Effective

Ideally suited for small and mid size projects where the full size tools as just to clumsy. Some examples include pens, Christmas ornaments, bottle stoppers, handles and bowls, just to name a few.

To use the Mid Size Simple Turner & Hollower just follow these 3 simple steps.

1. Position the tool rest as close to the work as possible so the carbide cutter is at the lathe center line.
2. Place the tool on the tool rest with the tool shaft parallel with the floor.
3. While securely holding the tool slowly move the carbide cutter into the work.

Because of the small tool shaft the tool should not extend past the tool rest more than 3 inches.

The Mid Size Simple Rougher - Simplify Roughing

When roughing with the mid size Simple Rougher you'll notice right away most of the shock created by interrupted cuts during roughing is absorbed in the tool rest instead of your hands and arms. As you begin to move the tool across the turning block you'll see how fast these carbide tools cut and how much simpler roughing is. It won’t be long until your block is a cylinder and you'll get your first look at what your turning will become.

In addition to roughing you'll notice the mid size Simple Rougher is a great tool for shaping the outside radius of a bowl and for turning beads on spindle turnings.

Straight line turning is also simplified and it's also a great tool for hollowing out the inside of a bowl. If you're making a box or other vessel that requires square inside corners and a flat bottom this is the tool of choice for that as well.

The Mid Size Simple 55° Detailer - Intricate Detail Work

The design of the mid size Simple 55° Detailer lends itself perfectly to small intricate detail work such as turning beads, cover finials, boxes and other final details on spindle and bowl turnings. The special shape of the diamond cutter allows access to tight places where the cutter on other tools simply can't be used. Also it is also very useful for making outside chuck tenons and reverse angle inside cuts so bowls can be chucked with dovetail jaws. If you use a 4 jaw chuck to hold your turnings this tool is a must and will be used on every turning.

As you use this tool you will soon see the wonderful small details that can added to your turnings. It will quickly become one of your favorite tools and used regularly.

Tool Engraving Helps Identify Cutter Selection

Each Simple Woodturning Tool is engraved so you know exactly what tool you have. That makes finding replacement cutters very simple!

Here's how you would find them:

• Authentic Simple Woodturning Tools - replacement cutter for Mid Size Simple Rougher (fits tools engraved with MSR)
• Authentic Simple Woodturning Tools - replacement cutter for Mid Size Simple Turner & Hollower (fits tools engraved with MSTH)
• Authentic Simple Woodturning Tools - replacement cutter fits Mid Size Simple 55° Detailer (tool engraved with MS55D)
• These tools will also accept negative rake replacement cutters for turning resin, acrylic or soft woods, if desired.

Note: These are MID SIZE tools. Full size tools do not have the letter M preceding (for example STH) and those cutters will not fit these mid size tools.

Product description

Easy Wood Tools, 3 Piece MINI-SIZE Combo Set, Rougher, Detailer, Finisher

• COMBO! Includes the Easy Wood Tool, Mini Easy Rougher, Finisher & Detailer!
• 5200 Mini Easy Rougher, 6200 Mini Easy Finisher, 7200 Mini Easy Detailer.
• Best for wood-turning projects such as; pens, goblets, wine stoppers and small bowls!
• All three items have a 12'' maple, easy to hold handle.
• The tool bars are 3/8'' x 4''. The max reach is 2''.

User questions & answers

Question:	does this set come with the need allen wrench
Answer:	They do come with the Allen wrench. Look close or you will not see it.
Question:	are cutters include with easy tool
Answer:	Mini Tools come with a Standard Carbide Cutter installed and a hex key: Ci2-SQ, Ci3, Ci4 .
Question:	Is the negative rake cutter tip avaiable to buy separately in this
Answer:	yes

• 【 Replaceable Insert Design】We provide 3 main shape cutter bars of lathe woodworking tools. Universal design, you can replace the cutter as you want. You’ll appreciate the simplicity with which your project can be quickly turned & hollowed to the desired shape using this tool. Set of 3 Large Size Carbide Lathe Turning Tools with Color Coded Handles
• 【 Products Material 】Aluminium grip handle and CNC machined high carbon steel blade bars, increase the stability and shock resistance. Making them stronger, stiffer and less likely to roll than round shaft tools. Stainless steel will never rust and will last for years.
• 【 Adjustable Dimension 】Length of blade bar 9.84" ( 250mm ), length of aluminium grip handle：11.61" ( 295mm ) , overall adjustable length up to 17" ( 430mm )
• 【 Easy to use 】Greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY
• 【 Set Contains 】1 x universal aluminium grip handle, 3 x CNC high carbon steel blade bar for different shape cutter, 1 x 14*14mm square cutter , 1 x r6 12*2.5mm round cutter, 1 x 35° diamond cutter, 3 x wrench

User questions & answers

Question:	Is the carbide insert cutter Ci0 or Ci
Answer:	Hi,customer, diameter 0.472"(12mm). Thank you for your question.
Question:	What size screw used for each of the tools use
Answer:	Hi,customer, It fits 1/4-20 x 3/8" stainless set screws. Thank you for your question.
Question:	these lathe tools preinstalled
Answer:	Thank you for your question. You should install before you use it.But it's not too hard.
Question:	What is the material
Answer:	Thank you for your question. This wood turning tools set is aluminium grip handle and CNC machined high carbon steel blade bars. Thank you.

Product features

The Rougher - Make Roughing easier

In addition to roughing you'll notice the Rougher is a great tool for shaping the outside radius of a bowl and for turning beads on spindle turnings.

The Finisher - Convenient & Effective

Perfect for small and mid size projects, such as pens, Christmas ornaments, bottle stoppers, handles and bowls.

The Detailer - Intricate Detail Work

As you use this tool you will soon see the wonderful small details that can added to your turnings. It will quickly become one of your favorite tools and used regularly.

Benefits of Carbide Adust wood turning tools

• Simple to use for all skill levels
• Woodturning is fast and more enjoyable
• You can focus on your project and not on techniques or sharpening
• No long learning curve
• No expensive sharpening equipment
• Begin turning as soon as your box arrives!

Product description

Sharpening lathe tools can be quite frustrating, perhaps it”s just not the fun you first looked for. Now carbide turning tools are becoming more and more popular, after all, no one likes learning all about sharpening chisels when you can start turning right away upon receiving these carbide tools. This set is also very versatile. Digging into material, making finer cuts, finishing on bowls as well as spindles. Rougher, hollower and detailer make an ideal set for lovers of woodturning. These turning tools help beginners as well as seasoned workers to get jobs done beautiful.

Specification:

Rougher(11mm Square cutter): Rougher can make fast material removal, quickly get a block to a cylinder for a good start.

Hollower(12mm Round cutter): Hollower is the the spirit of woodturning. It’s always a pleasure to see your cylinder transform into artware with beautiful curves.

Detailer(Diamond cutter): Make beads and coves in spindles.

• Full size woodturning tool with round carbide cutter. Overall length: 17.1". Cutter size: 12mm round
• Balanced length and weight ensuring safe and enjoyable time with your wood projects.
• The round cutters finish on bowls as well as spindles.
• Carbide cutters are hard and durable, you will see them outperform HSS chisels the second they touch the wood.
• No need to sharpen, carbide tips will remain it's sharpness after heavy uses. When you need to chage cutter, replace, fasten, Done!!

User questions & answers

Question:	is the wooden handle included
Answer:	Yes. The wooden handle is included.

Product description

Product description:



Brand: YUFUTOL

Material: High carbon steel, Tungsten Carbide，Wood

Shape of Cutter: Round,Diamond，Square

Overall length: 18.5-19.65"(470-500mm)

Bar length: 7.09-7.87"（180-200mm）

Handle length:11.41-11.81"（290-300mm）

Handle diameter：1-1.25"（26-32mm）



Packing list:



1 x Carbide Tiped Hollower Tool

1 x Carbide Tiped Rougher Tool

1 x Carbide Tiped Detailer Tool

1 x Carbide Tiped Finisher Tool

2 x 12mm Round Carbide Inserts

2 x 16mm Round Carbide Inserts

2 x Diamond Carbide Inserts

2 x 14mm Square Carbide Inserts

4 x Screws

1 x star key wrench of T15

1 x star key wrench of T20



More Features:

Ideal for giving you a smooth finish on curved, concave surfaces , hollowing jobs and for general turning applications

Cutter rotates give you numerous fresh edges without sharpening

Compared with steel the solid carbide stays sharp for longer



Tips:

When you on working, please remember to protect your eyes from flying debris!

Please don't let children touch it.

• Combo Set Include: 4 Pieces Wood Turning Tools(Finisher/Rougher/Detailer/Swan Neck Hollower),2 Sets of Carbide Insert Cutters And 2* Key Wrenches
• Dimension：
• 2 Sets of indexable Replacement carbide inserts:matched with Carbide Cutter (2pcs Square14×14 × 2.0mm，2pcs Round 12 × 2.5mm-30°，2pcs Round 16 × 3mm-30°,2pcs Diamond 10×28mm with Radius Point)
• Easy to use:greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY
• Designed to be kept flat on the tool rest and level to the floor, the YUFUTOL Finisher/Rougher/Detailer/Hollower will effortlessly hog away massive amounts of material for any woodturning process without the need for sharpening，for wood hobbyist or DIY or carpenter