13 best tools more wood lathes

Product description

Arm & Hammer air filters are designed to trap airborne particles like pollen, dust, pet dander and a variety of other common airborne allergens. Like many Harm and Hammer products that are designed to clean, this filter is designed to help "clean" the air in your home by reducing airborne particles and reducing odors. The Arm & Hammer Maximum Allergen and Odor Reduction air filters maximize odor reduction with three powerful built-in ingredients. First, Arm & Hammer baking soda has been a trusted odor fighter since 1946 and it neutralizes odors on contact. The filters also contain Oguard II a proprietary odor reduction ingredient that is highly effective at reducing a wide range of odors. Lastly they have built-in carbon granules with have a large capacity for absorbing odors. The electrostatic, pleated filter has a Merv 11 allergen reduction performance and lasts up to three months.

From the Manufacturer

Arm & Hammer air filters are designed to trap airborne particles like pollen, dust, pet dander and a variety of other common airborne allergens. Like many Harm and Hammer products that are designed to clean, this filter is designed to help "clean" the air in your home by reducing airborne particles and reducing odors. The Arm & Hammer Maximum Allergen and Odor Reduction air filters maximize odor reduction with three powerful built-in ingredients. First, Arm & Hammer baking soda has been a trusted odor fighter since 1946 and it neutralizes odors on contact. The filters also contain Oguard II a proprietary odor reduction ingredient that is highly effective at reducing a wide range of odors. Lastly they have built-in carbon granules with have a large capacity for absorbing odors. The electrostatic, pleated filter has a Merv 11 allergen reduction performance and lasts up to three months.

• Maximum odor reduction unscented pleated air filter
• Allergen air filter plus enhanced odor reduction
• Built in carbon granules have large capacity for absorbing odors
• MERV 11 rating allergen reduction performance
• Lasts up to 90 days
• Captures pet dander, flower pollen, smoke and dust particles
• Utilizes 3 ingredients: baking soda, Oguard II and carbon granules
• Provides protection from pet dander, pollen, dust, smoke and unpleasant aromas lingering around your home

User questions & answers

Question:	What size particles is smallest this will trap
Answer:	You would spot many dusts and hair on the pre-filter after a while.
Question:	Not clear on if these are poly filter, as recommended by our hvac company. can you confirm, please
Answer:	Yes it came with a manual
Question:	Do these contain fiberglass
Answer:	No. See following video at 16:32 for the demonstration: https://www.youtube.com/watch?v=gV-8CKaxCxk

Product features

Why Choose Arm & Hammer

Arm & Hammer Maximum Allergen & Odor Reduction is able to outperform fiberglass and basic pleated non-electrostatic filters.This filter is made to last up to 90 days. Arm & Hammer Maximum Allergen & Odor Reduction offers unscented odor removal through Arm & Hammer's trusted baking soda, carbon granules, and a proprietary odor reducing ingredient. This filter reduces odor on contact and has a large capacity for absorbing odors.

About Arm & Hammer

Arm & Hammer has been the standard of purity and a trusted household staple since 1846. Arm & Hammer offers a wide variety of products to fit all house hold needs. Arm & Hammer air filters use our trusted baking soda formula in every air filter to ensure clean air.

Product description

ARM and HAMMER Air Filters are designed to trap airborne particles like pollen, dust, pet dander, and a variety of other common airborne allergens. Like many ARM and HAMMER products that are designed to clean, this filter is designed to help clean the air in your home by reducing airborne particles.

• Unscented odor fighting power of Pet Fresh.
• Technology aimed at managing pet and other common household odors is incorporated into the filter.
• Captures particles like pollen, dust, pet dander and a variety of other common airborne allergens.
• Filter last up to 90 days.
• The ARM & HAMMER name, logo, distinctive orange trade dress and PET FRESH are trademarks of Church & Dwight Co., Inc.

User questions & answers

Question:	What does the 16000 mean
Answer:	Yes, the difference of air quality is noticeable after using the air purifier

Product features

Why Choose Arm & Hammer

Arm & Hammer Maximum Allergen & Odor Reduction is able to outperform fiberglass and basic pleated non-electrostatic filters.This filter is made to last up to 90 days. Arm & Hammer Maximum Allergen & Odor Reduction offers unscented odor removal through Arm & Hammer's trusted baking soda, carbon granules, and a proprietary odor reducing ingredient. This filter reduces odor on contact and has a large capacity for absorbing odors.

About Arm & Hammer

Arm & Hammer has been the standard of purity and a trusted household staple since 1846. Arm & Hammer offers a wide variety of products to fit all house hold needs. Arm & Hammer air filters use our trusted baking soda formula in every air filter to ensure clean air.

Product description

         Basic data:

• Brand: Dirtech
• Material：Stainless Steel and Aluminum alloy
• Length：14 Inches
• Diameter: 1 Inch
• Aperture：12mm

         Other tool set：

• DW-3:mini finisher Rougher Detailer with Woodhandle and all Carbide Tipped Inserts
• DW-5:mid Size Rougher Detailer Finisher with 2pcs aluminum alloy handle and all Carbide Inserts
• DW-6:mid Size Hollower Rougher Detailer Finisher with 2pcs aluminum alloy handle and all Carbide Inserts
• DW-9:mid Size Hollower Rougher Detailer Finisher Parting Sanding with 3pcs aluminum alloy handle and all Carbide Inserts

         Other single tool：

• R12：Finisher with 12mm Round Carbide Insert and Copper Hoop and T15 Wrench
• R16：Finisher with 16mm Round Carbide Insert and Copper Hoop and T15 Wrench
• S14：Rougher with 14mm Square Carbide Insert and Copper Hoop and T20 Wrench
• S15：Rougher with 15mm Square Radius Carbide Insert and Copper Hoop and T20 Wrench
• DT: Detailer with 2pcs Diamond Carbide Inserts and Copper Hoop and T15 Wrench
• H8.9：Hollower with 8.9mm Round Carbide Insert and Copper Hoop and T15 Wrench
• Aluminum alloy handle: blue, cyan, red, gold（They can match the above tools）

         Be Careful:

• Carbide cutter is very sharp, don't let it hurt your skin
• Don't let children touch it
• Please protect your eyes when working

• It can accepts all Woodturning tools bar with a 12mm diameter
• Replaceable Handle：Match all Woodturning Tool Bar in my Store on Amazon.
• Interchangeable handle comes in metallic Black，there are two screws and two ways，to more fixed
• Length：14 Inches
• Available in a variety of colors

Product description

▶Specifications：

• Shape:Diamond shape with radius point
• Size: 10mm (.39”) x 28mm (1.10”) Diamond Shape
  
  Thickness:2.5mm
• Angle: 30 degree
• Material: Solid tungsten carbide
• Hardness: 94.5HRA
• Package: 10pcs carbide cutter inserts in a plastic box
• Fits Tools: EWTCi4,Penn State Industries, Carbide Magic Detailer

▶Other standard size Carbide Cutter Inserts for Wood working & Turning products in our Amazon shop：

✔Square with Radius Curve Face Series:

• 2”curve radius side 11x11x2.0-R50
• 2”curve radius side 15x15x2.5-R50
• 4”curve radius side 15x15x2.5-R100
• 6”curve radius side 15x15x2.5-R150
• 4”curve radius side 15x15x2.5-R100-81°(BYRD) 

✔Square Straight Insert-Countersink Hole Series:

• 11x11x2.0-30°
• 12x12x1.5-35°
• 14x14x2.0-30°
• 15x15x2.5-30° 

✔ Round Carbide Inserts Series for Wood Turning:

• Ø12x2.5-30°
• Ø15x2.5-30°
• Ø16x3.0-30°
• Ø8.9x1.85-30° 

✔ Diamond shaped carbide cutter insert:

• Diamond: 28mm X 10mm-30° (VEMN-160208 / VEMN-160202) 

★Tips: When you on working, please remember to protect your eyes from flying debris!!

 Welcome to our page ,We have prepared a lot of professional woodworking tools for you.

• 【High Quality &Durable】:Made of solid tungsten carbide, providing you the experience of sharp and durable use
• 【Standard Size】:10mmX28mmX2.5mm(thickness),30 degree cutting angle with round pointed head
• 【Easy to Install】:-Easy to replace your hand tools and planers, excellent accessory for carpentry
• 【More Humanize】:The diamond shape and the special cutting angle make your cutting work more reasonable, more accurate and cleaner
• 【More Professional】:We have more than 10 years of experience in the alloy industry. and we only choose the best manufacturers in order to provide you with the best products quality

• Benefits of Carbide Lathe Tools: Simple to use for all skill levels making woodturning fast and more enjoyable. You can focus on your project and not on techniques or sharpening. No long learning curve or expensive sharpening equipment. You can begin turning as soon as your box arrives because each tool comes with a very sharp, rotatable carbide cutter. Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood.
• Tool Use: The Simple Turner & Hollower is the simplest to use carbide tool on the market. You’ll appreciate the simplicity with which your project can be quickly turned & hollowed to the desired shape using this tool. The Simple Rougher carbide tool makes roughing much simpler & less physical as most of the shock created by interrupted cuts is absorbed in the tool rest instead of your hands & arms. The Simple 55 Detailer carbide tool that provides a much higher level of woodturning creativity.
• Handle Details: Premium quality solid aluminum, 100% USA made by American craftsman. CNC machined from aircraft aluminum for balance, durability, and to last for years. Covered with a soft, comfortable foam rubber grip to reduce hand cramping during long turning sessions and for great tool control. Overall length is 17"; outside diameter is 1 3/8"; tool opening is ½" diameter. Tools can be easily changed by loosening the two stainless steel set screws.
• Full Size Tool Details: Premium quality CNC machined from ½” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. Stainless steel will never rust and will last for years. These professional full size tools feature an overall length of 12", with a handle tang of ½" diameter x 2½" length.
• Tool Engraving: Each Simple Woodturning Tool is engraved so you know exactly what tool you have. That makes finding replacement cutters very simple! Look for authentic Simple Woodturning Tool replacement cutters. STH = Simple Turner and Hollower. SR = Simple Rougher. S55D = Simple 55° Detailer

User questions & answers

Question:	Do these fit in your SHS
Answer:	Yes they do. These are full size tools which have a 1/2" round handle tang, which is the tool size that the SHS accepts.
Question:	What is the length of the shaft
Answer:	These tools are 12" long overall, when it's in the handle you have 9.5" of shaft left. Thanks!
Question:	Does this set include cutters for each
Answer:	Yes it does. Each tool will come with a cutter and screw installed and ready to use right out of the box.
Question:	Can someone tell me if and where i can find a new set screw forvthe handle? I have one that is rounded out
Answer:	Can you send us a message? We'd be happy to send you one. They are 1/4-20 x 3/8" stainless set screws.

Product features

The Full Size Simple Turner and Hollower is the simplest to use turning and hollowing tool on the market today!

The Simple Turner & Hollower is the tool of choice to be used after a block has been roughed into a cylinder. Both beginners and experts alike appreciate the simplicity with which your project can be quickly turned and hollowed to the desired shape with this tool.

To use the Simple Turner and Hollower just follow these 3 simple steps.

1. Position the tool rest as close to the work as possible so the carbide cutter is at the lathe center line.
2. Place the tool on the tool rest with the tool shaft parallel with the floor.
3. While securely holding the tool slowly move the carbide cutter into the work.

As you turn and hollow your vessel with this tool you'll quickly discover how simple it is to use. It won't be long until it's your favorite tool for doing 90 percent of the shaping work required on the inside and outside of most vessels.

The Full Size Simple Rougher carbide woodturning tool makes roughing much simpler and less physical.

When roughing with the Simple Rougher you'll notice right away most of the shock created by interrupted cuts during roughing is absorbed in the tool rest instead of your hands and arms. As you begin to move the tool across the turning block you'll see how fast these carbide tools cut and how much simpler roughing is. It won’t be long until your block is a cylinder and you'll get your first look at what your turning will become.

In addition to roughing you'll notice the Simple Rougher is a great tool for shaping the outside radius of a bowl and for turning beads on spindle turnings.

Straight line turning is also simplified on projects such as the wishing well seen in the photos of this tool. Also it's a great tool for hollowing out the inside of a bowl. If you're making a box or other vessel that requires square inside corners and a flat bottom this is the tool of choice for that as well.

The Full Size Simple 55 Detailer is a wonderful carbide woodturning tool that provides a much higher level of woodturning creativity.

The design of the Simple 55° Detailer lends itself perfectly to small intricate detail work such as turning beads, cover finials, boxes and other final details on spindle and bowl turnings. The special shape of the diamond cutter allows access to tight places where the cutter on other tools simply can't be used. Also it is also very useful for making outside chuck tenons and reverse angle inside cuts so bowls can be chucked with dovetail jaws. If you use a 4 jaw chuck to hold your turnings this tool is a must and will be used on every turning.

As you use this tool you will soon see the wonderful small details that can added to your turnings. It will quickly become one of your favorite tools and used regularly.

Full Size Carbide Lathe Tools Technical Details

• Simple Rougher (SR) Tool: Carbide cutter - 90° square 14mm x 14mm with very sharp corners
• Simple Turner & Hollower (STH) Tool: Carbide cutter - 9/16” diameter - Flat top cutter
• Simple 55° Detailer (S55D) Tool: Carbide cutter - 55° Diamond
• Overall tool length – 12"
• Tool Shaft – Stainless Steel ½" square
• Stainless steel will never rust
• Handle tang - ½" diameter x 2½" length
• Full size tools are recommended for turnings over 6" up to 24" in turned diameter, and hollowed to a max depth of 12". Although any size project can be turned with these tools, they are primarily intended for medium to large size projects.

Tool Engraving Helps Identify Cutter Selection

Each Simple Woodturning Tool is engraved so you know exactly what tool you have. That makes finding replacement cutters very simple!

Here's how you would find them:

• Authentic Simple Woodturning Tools - replacement cutter for Simple Rougher (fits tools engraved with SR)
• Authentic Simple Woodturning Tools - replacement cutter for Simple Turner & Hollower (fits tools engraved with STH)
• Authentic Simple Woodturning Tools - replacement cutter fits Full Size Simple 55° Detailer (tool engraved with S55D)
• These tools will also accept negative rake replacement cutters for turning resin, acrylic or soft woods, if desired.

Note: These are FULL SIZE tools. Mid size tools have the letter M preceding (for example MSTH) and those cutters will not fit these full size tools.

• Benefits of Carbide Lathe Tools: Simple to use for all skill levels making woodturning fast and more enjoyable. You can focus on your project and not on techniques or sharpening. No long learning curve or expensive sharpening equipment. You can begin turning as soon as your box arrives because each tool comes with a very sharp, rotatable carbide cutter. Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood.
• Handle Details: The most beautiful lathe tool handle on the market, 100% USA made by American craftsman. CNC machined from solid aircraft aluminum for balance, durability, and to last for years. Overall length is 8"; outside diameter is 1 3/16"; tool opening is 1/2" diameter. If needed, tools can be easily changed by loosening the two stainless steel set screws.
• Simple Start Tool Details: CNC machined from 3/8” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. These professional tools feature an overall length of 6.5".
• Tool Use: The Simple Start Turner & Hollower is ideal for turning small pens, tops, bottle stoppers, etc. The Simple Start Rougher carbide tool makes roughing much simpler & less physical as most of the shock created by interrupted cuts is absorbed in the tool rest instead of your hands & arms. The Simple Start 55 Detailer carbide tool is perfect for cutting small details or a dovetail tennon. It can also be used as a parting tool.
• Tool Engraving: Each Simple Woodturning Tool is engraved so you know exactly what tool you have. That makes finding replacement cutters very simple! SSTH = Simple Start Turner and Hollower. SSR = Simple Start Rougher. SS55D = Simple Start 55° Detailer

User questions & answers

Question:	Are there negative rake replacement cutters? If so what is the item number to oder. Thanks
Answer:	Replacement filter option is listed at the top of the description page for this unit. You just have to click the box. Look harder if you didn't see it.
Question:	Unclear what size replacement cutters are also
Answer:	The link of replacement filter is: https://www.amazon.com/dp/B07CTFMQ6K. The filter will last 6-12 months depending on usage.
Question:	What is th replacement tip part # for my simple woodturning tools simple start carbide lathe tool set of 3 mini tools with 8" solid aluminum handle
Answer:	This air purifier has some white noise when set at the highest setting, and you can not really hear it at all on the lowest or sleep setting. I have extremely sensitive hearing, can hear the buzz from electronics and dimmed lights and have dealt with tinnitus in the past. I tend to turn it on high when sitting in the other room, and lower it to the middle setting when I'm in the room.
Question:	Will you be manufacturing replacement cutters with negative rake angles
Answer:	Yes it does

Product features

Benefits of Carbide Simple Woodturning Tools

1. Simple to use for all skill levels
2. Woodturning is fast and more enjoyable
3. You can focus on your project and not on techniques or sharpening
4. No long learning curve
5. No expensive sharpening equipment
6. Begin turning as soon as your box arrives!

Tool Engraving Helps Identify Cutter Selection

Each Simple Woodturning Tool is engraved so you know exactly what tool you have. That makes finding replacement cutters very simple!

Here's how you would find them:

• Authentic Simple Woodturning Tools - replacement cutter for Simple Start Rougher (fits tools engraved with SSR OR MSR)
• Authentic Simple Woodturning Tools - replacement cutter for Simple Start Simple Turner & Hollower (fits tools engraved with SSTH OR MSTH)
• Authentic Simple Woodturning Tools - replacement cutter fits Simple Start 55° Detailer (tool engraved with SS55 OR MS55D)
• These tools will also accept the negative rake replacement cutters for resin or acrylic turning, if desired.

Note: These are SIMPLE START tools. Full size tools do not have the letters SS preceding (for example STH) and those cutters will not fit these tools.

Solid Aluminum 8" Handle

Handle Details:

• Overall length: 8".
• Outside diameter: 1-3/16".
• Opening for tool: 1/2".

Produce Beautiful Pens

Well balanced tools to begin working right out of the box.

12" Overall Tool & Handle Length

• Overall tool length is 6.5", 4" of tool extends beyond the handle.
• CNC machined from 3/8” square stainless steel, making them stronger, stiffer and less likely to roll than round tools.

Set of 3 Tools & Handles for Pen Turning

• Simple Start Rougher - SSR - create basic shapes
• Simple Start Turner & Hollower - SSTH - refine your shape
• Simple Start 55° Detailer - SS55 - detail your shape

Product description

Carbide Tip Turning Tools Dimensions:

Overall length: 17”/430mm，Bar length:6.7"/ 170mm，Handle length:10.23"/260mm，Handle diameter：1-1.25"/26-32mm

Packing List：

1 pc Carbide Tipped Rougher Tool – Square 15x15x2.5mm R50°

1 pc Carbide Tipped Detailer Tool – Radius Diamond 10x28mm

1 pc Carbide Tipped Finisher Tool – Round 12mm x 2.5mm -30°

2 pcs Square Carbide Insert 14x14x2.0mm

2 pcs Diamond Carbide Insert 10x28mm

2 pcs Round Carbide Insert 12mm diameter x 2.5mm -30°

4 pcs Screws 4x8mm for round and diamond inserts

2 pcs Screws 6x8mm for square and radius square inserts

3 pcs star key wrench

• ✅ CARBIDE WOODTURNING TOOLS - Our lathe turning tools has greatly simplified wood turning, This set of carbide lathe tools is ideal for turners at any skill level, making woodturning fast and more enjoyable. Each lathe chisel features a carbide tip with multiple sharp edges that can be rotated several times, Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood.
• ✅ CARBIDE TURNING TOOLS SET - Premium quality CNC machined from ½” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor
• ✅ ERGONOMICS TOOL HANDLE - Hard and Solid beech wood，Ergonomics design makes it more comfortable while doing turning job. Unlike the aluminum handle wood turning tool on the market which comes with only one handle, which means you have to change out the bar every time you want to switch tools.
• ✅ WOODTURNING TOOLS & ACCESSORIES - Set includes 3 turning tools : rougher tip – Square 15 x 15 x 2.5mm R50, detailer tip – Diamond 10x28m with Radius point , finisher, with extra sets of carbide inserts. Set comes with extra replaceable carbide insert: 3 Sets of indexable Replacement carbide inserts (2pcs Square14 ×14 × 2.0mm，2pcs Round 12 × 2.5mm-30°, 2pcs Diamond 10×28mm with Radius Point) and 3 torx star tip wrenches.
• ✅ SATISFACTION GUARANTEE - Our number one priority is customer satisfaction! If you aren’t happy with your wood turning carbide tool set we offer a no questions asked, 100% money back guarantee.

User questions & answers

Question:	Do you offer replacement carbide tips
Answer:	There are 6 pcs extra carbide tips come with the set, but separate carbide inserts pack (same 6 pcs) will be listed soon on amazon in next month, we will update the purchase info on this page.
Question:	Do you also have a bowl gouge for wood turning
Answer:	Hi , currently we only sell 3 piece set , but we will list more wood turning tools in this year! please add us to your wish list or shopping list so you can find us later . Thank you !
Question:	I need the detailer can I purchase it separately? Do you have other items
Answer:	Hi, Thank you for your interest in our carbide lathe tools. Currently we have only 3 piece set. As you can search on amazon, our price is very competitive, but without comprising on quality ( return the tool set if you are not happy with it) the set includes replacement inserts as you will always need them if you use the carbide tools.
Question:	I need negative rake inserts as well. What size do i need
Answer:	Hi, currently we don’t sell negative rake inserts. If you want to turn the synthetic material like resin or acrylic, simply raise your tool rest so that the cutting edge of the insert is about 1/8 inch above center, present your tool to the blank at a slightly downward angle. Or, Use a roughing gouge till the very end then use carbide for finish cuts.

• Indexable Replacement carbide insert design: matched with Carbide Insert, Indexable give you fresh edge for maximum cutter life. If you need Carbide Replacement Tip Insert , you can find it in our Amazon Store，(Square11 ×11× 2.0mm，Round 12 × 2.5mm-30°，Diamond 10×28mm with Radius Point and 10×32mm with Sharp Point)
• Handle：wood material，Ergonomics design makes it more comfortable while doing turning job
• Easy to use: greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY，Every tool is beautifully coated for durability
• Package: Set of 3, Plastic case packaging

User questions & answers

Question:	Are these tools small enough to turn pens and pencils with
Answer:	They are definitely capable of small work like pens, etc. I turn miniature plates and bowls, with diameters less than 1 inch, and they perform superbly.
Question:	How due you get replacement cutters
Answer:	It came with some extras and you can order more from almost anywhere for probably around 10 dollars.
Question:	can I use a square radius cutter insert in the square tipped chisel? And if so where can I find inserts for these
Answer:	Yes you can use square radius cutter inserts. We have carbide cutter 11*11*2.0 with R50. Please search the Asin B085QDSXCR in Amazon searching box to find it.
Question:	Where are these manufactured
Answer:	I think they are made in China. I am going to make new handles for mine. the brass ferule came off mine after a little use. Other wise I would say they are a good tool for a lot less. I have made my own bigger ones but did not have time to make these smaller ones.

Product features

Rougher

1.Makes roughing faster, simpler and safer

2.Matching indexable square11 × 11 × 2.0mm carbide inserts

Detailer

1.Perfectly to small intricate detail work, will be used on every turning

2.Matching indexable diamond VEMN160208 and VEMN160202 carbide blades

Turner & Hollower&Finsher

1.Quickly turned and hollowed to the desired shape with this tool

2.Matching indexable 12mm round carbide tipped

8 PCS Carbide Replacement Blades

• 2pcs Round 12mm carbide cutters
• 2pcs Square 11mm carbide inserts
• 2pcs Diamond with radius blades-VEMN160208
• 2pcs Diamond with sharp point blades-VEMN160202

Upgrade stainless steel

100% Solid stainless steel material, stay away from the trouble of rusty

Product description

Description:

Wood Bowl Sander Sanding Tool with Sanding Disc for Lathe Wood Turning Tool Woodworking





Specification:

Material: Boron nitride

Applicable industry: Carpentry

Sandpaper: 15pcs

Polisher Bonnet: 1pc

Wrench: 1pc





Features:

Nice bowl sanding tool for wood turning tool.

Moderate hardness, good stability, strong impact resistance.

Wooden rotating handle, easy and safe to use.

Used for buffing and polishing artificial stone, furniture, wood products, metal, automobile and other articles.





Package Included:

1 x Polishing Turning Tools Kit





Tips:



When you on working, please remember to protect your eyes from flying debris!

Please don't let children touch it.

• SAND ON LATHE - The Wood Bowl Hand Sanding Tool and 15-Pack Set of 2” Inch Small Mini Round Abrasive Sand Pad Discs for Turning Projects is a perfect addition to any turner’s toolkit and allows you to both finish sanding and polishing of wood workpieces that are still on the lathe; You will be able to do most bowl sanding (4 inches and upwards) with the piece mounted on the lathe
• BOWL HAND SANDING - The 2” diameter foam-backed sanding pad can adjusted to any angle to find the perfect position to assess difficult areas and complex designs By applying light pressure and consistently moving the sander, you will achieve the results you are looking for and in a fraction of the time it typically takes when hand sanding your project.
• WE BOWL SANDING HAVE INCLUDED - the most common diameter sanding head with the bowl sander. This sander head is made from a foam material that gives just enough to provide you with wonderful looking results each time you sand your projects. This 2” head size works well on most bowl turning projects since it can work with larger or smaller work pieces. Also included 5 ea. 180 grit, 5 ea. 240 grit, 5 ea. and 320 grit hook and loop sanding discs.
• BOWL SANDERS FOR WOODWORKING - This is amazing. The result is an incredible finish like I have never been able to get prior to using this! Well made, this tool work beautifully to smooth out any "tracks" left from more abrasive methods. So simple, but elegant. Highly recommend it.
• BOWL SANDER 100% SATISFACTION GUARANTEE - YOU as our customer are the most important thing to us and our team will answer all your questions and complaints about this product.

Product description

Product description:



This solid carbide cutter was sharpened on a diamond wheel and can be rotated to give you a fresh edge in a few seconds . Use it with the Round Carbide Turning Tool to get smooth finishes on concave surfaces and hollowing jobs .Many wood turners purchase these for replacements on popular carbide woodturning tools or for their own woodturning tool designs. 



More Features:



-Ideal for giving you a smooth finish on curved, concave surfaces , hollowing jobs and for general turning applications



-Cutter rotates give you numerous fresh edges without sharpening



-Compared with steel the solid carbide stays sharp for longer



Specifications:



Designed for Easy Start Finishers/Full Pro hollowers and other popular wood lathe tool,Diameter approximately .50" (12mm). Thickness .09" (2.5mm) with a .171" (4.40mm) dia. countersunk mounting hole at std. 82 degrees.



Mounted with a mounting screw, 4-40 SAE thread size, 3/8" long flat head cap screw. More choices in our Amazon store:



Round :12mm dia -2.5mm thick-30*



Round: 9mm dia-2.0mm thick-30*



Round: 11mm dia-4.0mm thick-30*



Round: 15mm dia-2.5mm thick-30*



Round :16mm dia-3.0mm thick-30*



Diamond Shape cutter inserts: 28mm X 10mm-30*

• The perfect grade of carbide provides the best combination of the sharpness and durability.Ideal for giving you a smooth finish on curved, concave surfaces , hollowing jobs and for general turning applications
• Designed for Easy Start Finishers/Full Pro hollowers,The right geometry or 30*cutting angle is ground to provide an edge the cuts cleanly and safely
• 10pcs M4X9mm Flat head screws are included in the package for your convenience.
• Per pack of 10 pcs round carbide insert cutters, Size DIA 12mm X THICK2.5mm-30*, saved more compared with buying only 1 PC
• Designed with a 30° cutting angle ground to a razor finish for making smooth cuts in any hard wood

User questions & answers

Question:	Will these fit on the rikon
Answer:	Rikon what ? I use three for my lathe carbide tools
Question:	Will these cutters fit the simple shear sth hollowing tool
Answer:	I’m sorry I don’t know what size the carbide cutter is on the tool. But I find the cutters work very well on my other full size tools. My suggestion would be to measure the cutter you have
Question:	I would like to make my own round carbide cutter with these or the 16mm. What size bar stock do you recommend for either or both
Answer:	I made my own tools and used 1/2 inch square stock, bar stock should work just fine too !
Question:	Would these work as a replacement for Rockler R1 carbide cutters
Answer:	Yes, that is the brand of Rockler I use.

Product description

Sharpening lathe tools can be quite frustrating, perhaps it”s just not the fun you first looked for. Now carbide turning tools are becoming more and more popular, after all, no one likes learning all about sharpening chisels when you can start turning right away upon receiving these carbide tools. This set is also very versatile. Digging into material, making finer cuts, finishing on bowls as well as spindles. Rougher, hollower and detailer make an ideal set for lovers of woodturning. These turning tools help beginners as well as seasoned workers to get jobs done beautiful.

Specification:

Rougher(11mm Square cutter): Rougher can make fast material removal, quickly get a block to a cylinder for a good start.

Hollower(12mm Round cutter): Hollower is the the spirit of woodturning. It’s always a pleasure to see your cylinder transform into artware with beautiful curves.

Detailer(Diamond cutter): Make beads and coves in spindles.

Swan neck bit: This one is heavy-duty. Make hollowing easier, reduce time and physical needed during turning.

2 aluminum alloy handle with 10mm square aperture:interchangeable with the 4 CNC machined square high carbon steel tool bars in this set.

• 8pc woodturning tool set safely packed in aluminum alloy case with sponge liner. Include handle*2, unit carbide cutter and its corresponding tool bar*4. wrench*2.
• The length of the tool bar can be adjusted freely. For safely, please make sure it's fixed tighlty by both screws. So the total length of the tool should be within 19".
• Top grade product. Tungsten carbide tip, stainless steel bar and aluminium alloy handle & case. Everything in this tool set is vibrant and reliable.
• One nice thing about carbide cutter is that you can just replace the cutters and continue with your project. No need to get bored on sharpening.
• Versatile and Convenient. Offers 2 alloy handle so it's easy to just grab and use without changing bits, the red and blue coating is easthetically pleasing while practically addiing friction..

User questions & answers

Question:	What are the sizes of the replacable carbide tips in mm
Answer:	It is effective and I suggest you turn on it all day.
Question:	How long are the handles? How long are the bars? How deep do the bars insert into the handles
Answer:	Sure, up to 215sq.ft.
Question:	What are the width and thickness of the tool shafts? Handle diameter
Answer:	Yes, you can replace the UV bulb✅

Product description

         Basic Data:

• Brand: Dirtech
• Material：Stainless Steel，Tungsten Carbide，Wood
• Total Length：12 Inches

         This set contains:

• Wood-Detailer with 2pcs Diamond Carbide Inserts
• Wood-Rougher with 11mm Square Carbide Insert
• Wood-Finisher with 12mm Round Carbide Insert
• T15 Torx star tip wrenches

         Other tool set：

• DW-3:mini finisher Rougher Detailer with Woodhandle and all Carbide Tipped Inserts
• DW-5:mid Size Rougher Detailer Finisher with 2pcs aluminum alloy handle and all Carbide Inserts
• DW-6:mid Size Hollower Rougher Detailer Finisher with 2pcs aluminum alloy handle and all Carbide Inserts
• DW-9:mid Size Hollower Rougher Detailer Finisher Parting Sanding with 3pcs aluminum alloy handle and all Carbide Inserts

         Other single tool

• R12：Finisher with 12mm Round Carbide Insert and Copper Hoop and T15 Wrench
• R16：Finisher with 16mm Round Carbide Insert and Copper Hoop and T15 Wrench
• S14：Rougher with 14mm Square Carbide Insert and Copper Hoop and T20 Wrench
• S15：Rougher with 15mm Square Radius Carbide Insert and Copper Hoop and T20 Wrench
• DT: Detailer with 2pcs Diamond Carbide Inserts and Copper Hoop and T15 Wrench
• H8.9：Hollower with 8.9mm Round Carbide Insert and Copper Hoop and T15 Wrench
• Aluminum alloy handle: blue, cyan, red, gold（They can match the above tools）

         Be Careful:

• Carbide cutter is very sharp, don't let it hurt your skin
• Don't let children touch it
• Please protect your eyes when working

• CNC machined 12mm solid stainless steel，Not easy to rust
• Indexable Replacement carbide insert design，Indexable give you fresh edge for maximum cutter life, And You can find matching carbide tipped insert(DW-3) in my Amazon store
• Woodhandle：solid wood material，Ergonomics design makes it more comfortable while doing turning job
• Each tool is designed with a square shaft making it easy to keep tools flat on the tool rest
• Total Length：12 Inches

Product description

Combo set of 5 Simple Woodturning Tools mid size replaceable carbide wood lathe tools with color coded handles for easy tool selection. Four tools in this set feature a square shaft that is designed to be kept flat on the tool rest and level with the floor. The tools for woodturning included in this package: Mid Simple Turner & Hollower - Ideal for turning small bowls, handles, bottle stoppers, pens etc from even super hard wood such as maple . Mid Simple 55° Detailer - Perfect for cutting small details like those shown on the pictured bird house ornament. Also ideal for cutting a dovetail tenon for mounting turnings in a 4-jaw chuck. Can be used as a parting tool. Mid Simple Rougher - square cutter with 2" radius. This tool is suited for small and mid size projects such as pens, Christmas ornaments, cheese slicer handles, etc. Mid Simple Shear Cutting Finisher: this 3/8" round shaft tool will give you the very best surface finish of any carbide tool because of it's shearing cutting action. Mid Simple 90 degree Detailer - perfect for detail work and cutting perfectly square inside corners. Tools are made from 3/8" solid steel and are beautifully nickel plated. Overall tool length is 9". Handle tang is 3/8" diameter x 2" length. Lathe Tool Handle details: These beautiful solid aluminum handles are CNC machined here in Ramsey Minnesota. Each tool handle is powder coated giving it an easy grip & very durable finish. Handle features include: Overall length: 12". Outside diameter: 1-1/8". Opening for tool: 3/8". Tools are easily changed by loosening the two stainless Allen set screws. All wrenches are included. Replacement inserts are available in our Amazon store. Customer service help is available by sending us a message or asking a question below.

• Set of 5 professional carbide wood lathe tools are American made by Harrison Specialties in Ramsey, Minnesota, a family owned CNC machining and manufacturing company.
• Simplify woodturning tool selection with beautiful color coded solid aluminum handles. Each CNC machined powdercoated turning tool handle is 1-1/8" outside diameter by 12" overall length.
• Carbide woodturning tools feature ultra-sharp replaceable tips, which have multiple sides that can be rotated. Replacing or turning the cutters is easy with the included Torx wrench. No more tool sharpening!
• Four included tools are designed with a 3/8" square shaft making it easy to keep tools flat on the tool rest. Overall turning tool length is 9". The 3/8" round Shear Cutting Finisher gives you the best finish of any carbide tool.
• Greatly simplifies woodturning with no need for any sharpening equipment.