14 best jet wood lathes

Product description

JET JWL-1221VS 12"x21" Variable-Speed Wood Lathe (719200)

• VERSATILITY: 24 integrated indexing positions.
• CONVENIENCE: Easy-to-reach controls and DRO.
• OPTIMAL SPEED: Choose from 60 to 3,600 RPM.
• INNOVATION: Ratchet-style belt tension system (patent pending).
• ON-BOARD STORAGE: Two handy tool caddies.

User questions & answers

Question:	Will 1221 tail stock accept #2 Morse taper drill chuck
Answer:	Yes! Just be sure that the tail stock hole and morse taper are clean, otherwise the #2 morse taper can be difficult to remove...
Question:	has this lathe have a indexing head
Answer:	William, yes this lathe has an indexing head. I have not yet used the feature but it is done with a spring loaded pin which you lock into anyone of 24 positions. The spring loaded pin in screwed in once the pin is set to hold it in place.Rich F
Question:	Is this Ron Swanson approved
Answer:	Yes, Ron personally blesses each unit as it’s loaded onto a truck.
Question:	Do you need to move a belt to change speeds? Or is there a dial or switch
Answer:	This lathe has a variable speed controller, so the speeds may be changed using the simple rotating knob. To provide speed ranges to suit any situation, especially for the more experienced turner, there is a three step pulley. This arrangement allows the variable speed controller to adjust speeds from 60 to 900 rpm on the low step of the pulley, 110 -1800 rpm on the 2nd step (medium), and a high speed range of 220 -3600 rpm on the the 3rd step. The belt need only be changed if you want to move to a different range of speeds. This is a very simple process.

Product features

JET 12'' X 21'' Variable Speed Wood Lathe - JWL-1221VS

The JET 1221VS lathe is different from anything we’ve made before. In truth, it’s different from anything that anybody has ever made before. The design is better. The features are better. The entire turning experience is better. And it all focuses on one concept … Control.

Product description

The new JET 1015VS is an ideal choice for the novice woodturner looking for an affordable, user-friendly first lathe, as well as the advanced enthusiast or professional who wants to add a full-featured mini-lathe to the shop. This sturdy, smooth-running 15" mini-lathe has the power, precision and versatility to turn out any number of projects. When you're ready to make your ideas a reality... Start Here.

• 15-1/2" BETWEEN CENTERS
• THREE SPEED RANGES: 200-1,050 / 300-1,750 / 600-3,600
• INTEGRATED 24-POSITION INDEXING
• EASY ACCESS TO BELTS: Improved tensioning system
• INCREASED RIGIDITY: Wider bed ways

User questions & answers

Question:	Does this lathe come with a stand
Answer:	No but one if available as an accessory.
Question:	Can I get parts in Canada for this lathe? Can it be shipped to canada
Answer:	CPO Outlets does not ship to Canada. For support in Canada, please contact Jet directly for guidance at 888-274-6848.
Question:	How accurate is the headstock to tailstock alignment
Answer:	As best I can tell, on mine it is very accurate.
Question:	Does this lathe have a reverse
Answer:	No, mine doesn’t. The larger, more expensive models may.

Product features

JET 10" x 15" Variable Speed Wood Lathe - JWL-1015VS

The new JET 1015 is an ideal choice for the novice woodturner looking for an affordable, user-friendly first lathe, as well as the advanced enthusiast or professional who wants to add a full-featured mini-lathe to the shop. This sturdy, smooth-running 15” mini-lathe has the power, precision and versatility to turn out any number of projects. When you're ready to make your ideas a reality... Start Here.

Product description

The JET JWL-1015 is an ideal choice for the novice woodturner looking for an affordable, user-friendly first lathe, as well as the advanced enthusiast or professional who wants to add a full-featured mini-lathe to the shop. This sturdy, smooth-running 15” mini-lathe has the power, precision and versatility to turn out any number of projects. When you're ready to make your ideas a reality... start here.

• 15-1/2" BETWEEN CENTERS
• SIX SPINDLE SPEEDS: 500/840/1,240/1,800/2,630/3,975
• Integrated 24-position indexing
• IMPROVED TENSIONING SYSTEM: Easier access to belts.
• INCREASED RIGIDITY: Wider bed ways.

User questions & answers

Question:	Can you add an extendion table on it to turn long spindel legs
Answer:	Yes! You just can't buy it on amazon..rockler and woodcraft sell them for around $150.
Question:	Is it a Morse taper
Answer:	Yes both the head stock and tail are #2
Question:	what is needed with this lathe for pen turning
Answer:	Basically, you will need a 7mm MT2 mandrel and your tools. When you order your pen kits, make sure you get the bushings and drill bit. Depending on how you finish the pens, you may need a buffing system. For acrylics, get a set of micro pads, they really bring the shine out. I also use a "french polish" and shellac to put a lasting hard coat on the finished product. Good luck and enjoy the lathe.
Question:	what is the thread size on the head stock
Answer:	Headstock Spindle Thread is 1" x 8 TPI.Complete data sheet is here:http://content.jettools.com/assets/manuals/719100_man_EN.pdf

Product description

The JET JWL-1640EVS 16"x40" variable-speed woodworking lathe is loaded with cutting-edge features that distinguish it from others in its class. Included is a sliding headstock, electronic infinitely variable speed from 40 to 3,200 RPM, and a headstock locking handle.

• VERSATILITY: 36 integrated indexing positions.
• IDEAL SPEED: Infinitely variable speed from 40 to 3,200 RPM.
• CONVENIENCE: Leg-mounted tool holder, and easy-to-access digital readout (DRO).
• SMOOTH MOVEMENT Tailstock features Acme threads.
• ADDED PROTECTION: Inverter is completely enclosed.

User questions & answers

Question:	Does this have a swing away for the tailstock
Answer:	No it doesn’t but you can get an extension and move the tail stock further away from the head stock. This gives plenty of working room. It’s an awesome lathe.
Question:	Does the headstock rotate as well as slide
Answer:	The newest 1640 models do not rotate. JET discontinued that feature.
Question:	Is this lathe available without the legs for a cheaper price
Answer:	I don’t think so. It’s pretty big to be mounting on a bench.
Question:	Does this come with wheels
Answer:	no. Given the weight, wheels would be a bad idea. IT is on adjustable feet and you can slide it to position.

Product description

Do you want a lathe that’s as versatile as your turning? The 1440 lathe from JET can be tailored to accomplish a wide range of projects. With a sliding and pivoting headstock, variable speed, and many other great features this lathe meets the needs of woodturners. Experience the JET 1440 lathe and see how versatility takes shape.

• VARIABLE SPEED: 400 to 3,000 RPM
• HEADSTOCK PIVOTS 360° WITH 7 POSITIVE LOCKING POSITIONS
• EASY-TO-READ RPM DISPLAY
• POSITIVE LOCKING TOOL REST WITH REDESIGNED CLAMPING
• CSA CERTIFIED

User questions & answers

Question:	The lathe comes with a factory warranty of 5 year but Amazon offers a different warranty of 4 years for $35.54. Do I really need to pay extra
Answer:	That is a call for you to make. At the price, I took it
Question:	Can it be used as a benchtop, without the legs
Answer:	Yes but lock down with bolts or clamps
Question:	Does it have a reverse switch
Answer:	My jet JWL-144VSK does not run in reverse
Question:	Is 400 rpm minimum speed too fast for some operations
Answer:	400 rpm is slow enough of my needs, I've never felt uncomfortable turning at that speed. Also I'm not fussy guy, so for what its worth.

Product description

Introducing the 1840EVS woodworking lathe from JET. Designed to be as versatile as you are in the shop this lathe features a headstock that slides the full length of the bed. The included four-inch cast iron risers allow you to easily choose the working height that maximizes your comfort.

• VERSATILITY: Electronic infinitely-variable speed from 40 to 3,200 RPM.
• COMFORT: 4" cast iron risers allow user to adjust height of lathe.
• CONVENIENCE: Leg-mounted holder keeps your tools close at hand.
• SAFETY: Magnetic-backed, remote emergency stop button can be situated along the lathe bed.
• SECURE HOLDS: Banjo uses non-marring, positive locking wedge system to securely hold tool post.

User questions & answers

Question:	Is the power single phase or triple
Answer:	Single
Question:	Is there a 110v model
Answer:	Not in this size. They do make smaller bench top models that run on 110v.
Question:	How long of a wood piece can the lathe handle? I am trying to make pieces that are 20 inches + in length and 13 inches + in width
Answer:	18 wide, 40 long
Question:	Understand the new model of the 1840evs does not have a pivoting headstock. this true
Answer:	Yes, it does not have a pivoting headstock

Product description

One of the easiest to use, best value chucks on the market. The Barracuda2 is an easy to use, high-performance, full accessorized key operated self centering four-jaw lathe chuck system. You only need one hand to use this lathe chuck as the "T" handle jaw tightening key enables you to to tighten the jaws with only one hand while your other hand is free to support your work.Comes with a wide variety of accessories (including 4 sets of jaws), and will mount any project onto your lathe. Ideal for bowls, spindles, small projects and much more. Fits all "C" series accessories, a 3.5" diameter, 1" x 8tpi, weight is just 4.0 lbs., and comes with its own case. Includes; #1 jaws, #2 jaws, #3 jaws, 1" pin jaws, a Screw Chuck Adapter, 3/4" x 16tpi spindle adapter, "T" handled Jaw tightening key, "T" handled Allen wrench, and a carrying case.

• Includes: Barracuda2 chuck body, self-centering jaw sets, woodworm screw chuck, spindle adapter, gear key, Allen wrench, screws, storage case
• Barracuda2 chuck body is 3. 5" Diameter and weighs 4 lbs. ; pre-threaded to 1" X 8TPI and includes 3/4" X 16TPI spindle adapter
• #1 step jaws: 3/32" To 1-3/8" & 11/16" To 2-3/8"; #2 round jaws: 7/8" To 1-1/2" &1-1/4" To 2"; #3 wide bowl jaws: 3-1/16" To 4-3/8"; pin jaws: 1" To 2-1/4"
• With the variety of included jaws, The CSC3000C will mount most turning projects onto your Lathe; including bowls, spindles, pens, other small turning projects, and much more
• This is a C-Series Chuck; Compatible with all additional C-Series Jaws and accessories: 7-3/4" Jumbo Flat Jaws (CJAWFJ2), 5" Small Flat Jaws (CJAWFJ1), Set of 2 Alligator Jaws (LCALJAWS), Pen Blank Drilling Jaws (CJAWPEN), 8-1/4" Super Finishing Jaws (CJAWXL), and more!

User questions & answers

Question:	Can i get this in 1 1/4" - 8 tpi
Answer:	Check out item LA11418. This adaptor may work for you.
Question:	Will a nova adapter work with this chuck? I have an old Rockwell 46010 I want to add this too. The only adapter I see for 7/8-14 is for Nova Chuck
Answer:	Hello,No, the Nova adapter will not work with this.Thanks
Question:	I need an adapter to fit 7/8 x 16tpi left hand
Answer:	No lathe has a left-hand-threaded spindle. If one did, the work would spin off the lathe every time you hit the 'on' button.
Question:	Is psi csc 3000c barracuda reversible
Answer:	There is no set-screw of any kind to maintain a safe secure hold of the chuck to the lathe while running in reverse. I do not on mine and would not without something like that available.

Product features

Maximize the Ability of Your Existing Wood Lathe

You will now easily be able to fitwork pieces with the PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System. Giving you high-performance, this Barracuda Lathe Key Chuck Systems completely accessorized and equipped to give the best results.

Sturdy and Easy to Operate

With a stunning build quality, the PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System includes a T handle jaw tightening key that enables you to tighten the jaws with only one hand while your other hand is free to support your work. This power tool also comes with a wide variety of accessories - including 4 sets of jaws, and will mount any project onto the lathe.

Product description

1/3 Horsepower bench top lathe with variable speed motor

• Motor: 1/3 HP, 2 Amp, 110V, Single-phase, 60 Hz
• 12-inch distance between centers
• 8-inch swing over bed
• Cast iron construction and infinitely variable speed control
• Includes two tool rests

User questions & answers

Question:	I have a chuck that is 1"-8tpi female thread (nova 48111), it doesn't fit on this lathe. what adapter should i buy
Answer:	Buy a 3/4" 16 TPI to 1" 8 TPI adapter. If you further questions go to http://www.woodturningz.com/downloads/w1704_ds.pdf for the specs on this machine.
Question:	is there an adapter for the face plate for mounting live center chucks? I bought one but won't line up with holes
Answer:	I'm not sure if they make the adapter to mount on the face plat. I have a 2" diameter three jaw,self centering scroll type chuck that i bought from Amazon that ihave used that works great,but i think that the holes in the face plate is for mounting a backing block to the piece of wood stock to turn a bowl. It says in the manual that you glue the block to the wood your turning and use the holes to screw the block on to face plate. Hope this helped.
Question:	What size wood stock can it hold? How about something like 12'' long by 8" wide piece of wood
Answer:	The length it will hold will be dependant upon what chucks you have in the head and tail stock. The bulkier the chucks, the shorter the length it will handle. I'd say it will hold 12" lengths unless your chucks are sizable. I wouldn't try more than 4" width stock unless it was short. Although the lathe may hold the stock, it would be too much for the motor. The intended purpose of this lathe is to make small things like ink pens, Christmas ornaments, small toys like tops or yo-yo's and tool handles etc. If you want to mount 12" X 8" stock you should be looking at full sized lathes.
Question:	is there anyway to secure to a bench
Answer:	Yes. It has has three holes in the base that you can bolt it down with. I bolted mine down on a metal stand. It holds it down real solid. Mine is the Shop Fox W1704 also. It is well built. I really like mine. Hope this helps!

Product features

Shop Fox W1704 Benchtop Wood Lathe

Tackle pen turning or other small cutting or shaping projects using the Shop Fox W1704 bench-top lathe from Woodstock International. Made of cast iron, and designed to fit neatly on a workbench, this lathe features a 1/3-horsepower, variable-speed motor and delivers spindle speeds between 700 and 3,200 revolutions per minute (RPM). It also features a safety paddle switch, an MT No. 1 spur center, an MT No. 1 live center, 4-1/4-inch and 7-inch tool rests, a 5-3/4-inch faceplate, and a 3/4-by-16-inch TPI RH spindle.

Includes Two Tool Rests

The W1704 includes both a 4-1/2 and 7-inch tool rest for various turning applications and with a 13-inch distance between centers and an 8-inch swing over the bed this lathe is ideal for a variety of turning projects.

Variable Speed

The infinitely variable speed from 700-3200 RPM comes in handy when turning hard or soft species of wood.

5-3/4-inch Faceplate Included

This benchtop lathe includes a 5-3/4-inch faceplate which threads onto the headstock spindle for non-spindle turning (usually used for making bowls or other items that cannot be supported from the tailstock).

Product description

Do you want a lathe that’s as versatile as your turning? The 1440 lathe from JET can be tailored to accomplish a wide range of projects. With a sliding and pivoting headstock, variable speed, and many other great features this lathe meets the needs of woodturners. Experience the JET 1440 lathe and see how versatility takes shape.

• VARIABLE SPEED: 400 to 3,000 RPM
• HEADSTOCK PIVOTS 360° WITH 7 POSITIVE LOCKING POSITIONS
• EASY-TO-READ RPM DISPLAY
• POSITIVE LOCKING TOOL REST WITH REDESIGNED CLAMPING
• CSA CERTIFIED

User questions & answers

Question:	up to 60" with optional extension bed": what is the length capacity as is
Answer:	1440 is 14 around max and 40” long
Question:	does jet 1440 have a forward-reverse switch
Answer:	No, this model does not have a reverse switch.
Question:	Does this unit run on 110 or 220 and how many amps does it require
Answer:	110v and is less than 15 amps.
Question:	Does this come with any drill chucks
Answer:	No, sold separately.

Product description

The SHOP FOX W1836 Wood Lathe is packed with features that wood turners love. A powerful 3/4 HP motor with electronic variable-speed spindle control and a digital RPM readout for precise speed adjustments make this lathe a top choice. 24 indexes in increments of 15 allow evenly spaced cuts while the headstock stays in a locked position which opens new possibilities not available on most bench top lathes. Heavy-duty cast iron construction and rubber feet for increased stability and smooth turning operations.

• 3/4 HP, 110V, single-phase, universal motor
• Electronic variable-speed spindle control with digital RPM readout
• 12" swing over bed
• Two spindle speed ranges: 500-1800 RPM & 1000-3800 RPM

User questions & answers

Question:	Are there any holes in feet of lathe to anchor it to a bench
Answer:	You can remove the feet to anchor it.
Question:	Does this come with the light pictured
Answer:	The light pictures is included with the purchase for this unit.
Question:	Will a Nova G3 chuck fit this lathe
Answer:	Yes. It works perfectly.
Question:	How many jaws the head has
Answer:	Mine only has an MT#2 taper. You will have to purchase a jaw set with that taper.

Product features

Shop Fox W1836 Benchtop Wood Lathe

The Shop Fox W1836 Wood Lathe is packed with features that woodturners love. A powerful 3/4 HP motor with electronic variable-speed spindle control and a digital RPM readout for precise speed adjustments make this lathe a top choice.

24 Index Positions

24 index points in increments of 15 degrees allow evenly spaced marking or cutting while the headstock stays in a locked position, this opens new possibilities not available on many benchtop lathes.

Variable Speed Control

The W1836 features variable speed control for on-the-fly speed adjustments. Two overlapping speed ranges ensure maximum spindle torque within each range.

Heavy Duty Live Center

The W1836 includes an MT#2 live center so you can start turning spindles right away. The live center installs into the tailstock quill with a tapered fit and the over sized precision ball-bearing design ensures superior turning operations with stability and no resistance.

Cast Iron Tailstock

Quickly and easily adjust the tailstock to accommodate workpieces up to 15 inch in length. The tailstock is secured with a cam-action clamping system for a rock solid grip.

Tool Holder

This lathe features a convenient tool holder for storing your chisels, extra centers and other tools when not in use.

Optional Bed Extension

The optional D4562 Bed Extension can be added to get you the capacity of a much larger lathe at a fraction of the price. This extension bed increases the capacity of your W1836 Shop Fox Benchtop Wood Lathe to handle pieces up to 38 inch long, long enough for balusters and even baseball bats.

Product description

The best 10" lathe for your money. ETL Listed and certified by Intertek. Powered by a 3/4 hp high performance motor and an SBC microprocessor, developed for automotive applications, delivering precision control and lasting reliability. 3/4 hp Variable Speed Motor (110V). Two belt positions: Position A 500-2000 RPM & Position B 1500-3600 RPM. Digital readout allows you to work at precise speeds. Headstock Thread is 1" x 8tpi. Headstock and Tailstock Taper is #2MT. Distance between Centers is 18". Swing over Bed is 10". Tailstock and Spindle Bore is 3/8". Quill Travel is 1-5/8". (24) indexing positions with spindle locking. Included: tool storage rack, work light with 18" flex cable, 6" tool rest, 12" tool rest, 3" Faceplate, Spur Drive Center, Tailstock Live Center, Hex Wrench(set of 4), Rubber feet, Knockout Rod, Phillips Screw Driver, Tailstock handle & bolt, Safety Goggles. Convenient built-in handles. Cast Iron base accepts optional extension bed for turning projects up to 42". Motor may run faster/slower.

• KWL-1018VS replaces TCLC10VS. ETL Listed and certified by Intertek
• Powered by 3/4 hp Variable Speed high performance motor(110V) & an SBC microprocessor. Two belt positions: 500-2000 RPM & 1500-3600 RPM
• Headstock Thread 1" x 8tpi. Headstock/Tailstock Taper #2MT. Distance between Centers 18". Swing over Bed 10". Cast iron base
• Tailstock & Spindle Bore 3/8". Quill Travel 1-5/8". (24) indexing positions with spindle locking. Convenient built-in handles
• See Description below for all of the included parts

User questions & answers

Question:	What is the largest size bowl I can turn using this
Answer:	This lathe has a 10" swing over the bed so the maximum size would be a 10" diameter bowl blank. Your finished bowl would then be slightly smaller depending on how much material was turned.
Question:	Under product description it says measurement system is metric? What is metric on this
Answer:	Nothing is measured in the metric system. That listing detail is incorrect.
Question:	Where can i purchase a belt
Answer:	Penn State Industries
Question:	how or where do you get the extension bed up to
Answer:	Item TCLC10XB is the extension bed for both lathes KWL-1018 and KWL-1018VS. Item TCLC12XB2 is the extension bed for lathe KWL-1218VS.

Product description

10" x 18" Lathe #70-105 was designed specifically at the request of pen turners who wanted a sturdy, dedicated machine for their craft. This scaled-down, basic mini lathe is constructed of cast iron so vibration is not a factor, unlike other lathes made of aluminum. 5 Speed ranges cover the bases for boring barrel holes, roughing out pen billets, turning to shape and finishing. Lathe includes a live center, tool rest, knock-out bar and wrenches.

• Rikon mini lathe: This Rikon mini lathe features a ½ motor that provides ample power for all turning needs. With a 10” swing and 18” between centers, this mini lathe also has a self ejecting tail stock and has easy access to speed change.
• Sturdy and Dedicated: Designed specifically at the request of pen turners who wanted a sturdy, dedicated machine for their craft. This scaled-down, basic mini lathe is made from cast iron, so vibration is not a factor, unlike other lathes made of aluminum.
• 5 speed ranger: This mini lathe has a 5 speed range that covers the bases for boring barrel holes, roughing out pen billets, turning to shape and finishing.
• Includes: This lathe includes a live center, tool rest, knock-out bar, and wrenches.

User questions & answers

Question:	Does the headstock have a morse taper and also the tailstock
Answer:	Yes they are both #2 taper
Question:	Does this lathe have a 1 inch 8tpi
Answer:	yes
Question:	Does Rikon or another manufacturer make a steady rest for this lathe
Answer:	Carter products and Ron Brown's Best (Peacetree), make steady rests suitable for. 10 inch lathes. Carter Products is about $375 and Ron Brown's Best is about $160. I believe either can be adapted to Rikon 105, 10" lathe.
Question:	can a veriabule speed drive add to this lathe
Answer:	You can buy a conversion kit from Penn State. It comes with a new motor and electronics. Note that the lowest speed is 650 vs 500 RPM which is faster that recommended if you use Cole Jaws.

Product description

Extend the turning capacity of the JET 1221VS woodworking lathe to 43" for larger projects. Easy to install. Doubles the length of the bed.

• COMPATIBILITY: Fits JET JWL-1221VS woodworking lathe.
• VERSATILITY: 22-1/2" lathe bed extension.
• DURABILITY: Cast iron construction.
• SIMPLICITY: Quick and easy installation.

User questions & answers

Question:	Hi. It has enough strength for work with wood. how many horsepower have. The lathe comes as shown in the photo
Answer:	i have turned 8" diameter oak logs that are 36" long. they weigh over 50 lbs when i mount them. the lathe works great. slow speed to start (so as to avoid natural frequency vibration when the log is out of round). the lathe rpm can be adjusted from about 50 rpm to 1000 rpm. i usually mount a rough log (bark and all), lock the lathe rigid, and rough work the log with an electric chain saw until the lathe can take over without throwing the log out of live and dead centers. i also bought the 41" lathe extension. i highly recommend the jet.
Question:	is the stand needed to use the bed extension
Answer:	I built my own stand to save a lot money. Its about 5ft long and holds both the main piece and extension. I also have it low enough to where the spindle is about elbow height when standing up.
Question:	Does the bed extension come with an extra leg
Answer:	I believe Jet sells an extension leg separately to accommodate the lathe bed extension. However, I only bought the lathe and lathe bed extension and then built the stand for that combination. Sorry I can't be more help.
Question:	would the extension work on a home-made lathe stand
Answer:	Yes, the stand will work with something homemade. In fact, I would argue that a well built homemade stand would be sturdier than the manufactured one from Jet. Some points to consider when building a homemade stand. 1. Will the stand be mobile or stationary. Mobile is nice for cleanup and small spaces, but is less stable and more prone to vibration. Stationary stands are much more stable and can be loaded down with "dead weight", for instance bags of sand or concrete mix. These have the added effect of reducing vibration. 2. Construction considerations for the stand should include height, weight and mobility. Also, consider tool storage and lighting. You can build an upper cabinet for lighting and storage of consumables, and you can make angled tool holders in the front with pvc pipe. Just fill the bottom several inches with rigid foam or devise a way to create spray foam plugs. The purpose of these would be to protect the tool edges as you slide them into the pipe. Hope this helps. I would highly recommend making your own stand. You can design it to fit your particular space, needs and budget.

Product description

Extend the turning capacity of JET 1015 lathes to 36-1/2” for larger projects.

• COMPATIBILITY: Fits JET JWL-1015 and JWL-1015VS lathes.
• VERSATILITY: 21" bed extension.
• DURABILITY: Cast iron construction.

User questions & answers

Question:	will this fit Jet mini lathe JWL
Answer:	It is made for the 1015 so I don't think it will fit the 1221.
Question:	does it come with connecting hardware
Answer:	Yes. The extra ended bed package contains all the hardware needed to connect the extension. Your can easily make all the fine-scale adjustments needed for smooth movement of the tailstock along the entire bed.
Question:	Is this the extension and the extension stand
Answer:	All I got was the bed. The stand I believe is a separate item ..
Question:	will this fit the Jet mini lathe JML
Answer:	I use it on my jet 1014 ,the base of the extension is wider than the base of the 1014 , the tool rest slides great . The extension bolts on the 1014 perfect