14 best delta lathes

Product description

JET JWL-1221VS 12"x21" Variable-Speed Wood Lathe (719200)

• VERSATILITY: 24 integrated indexing positions.
• CONVENIENCE: Easy-to-reach controls and DRO.
• OPTIMAL SPEED: Choose from 60 to 3,600 RPM.
• INNOVATION: Ratchet-style belt tension system (patent pending).
• ON-BOARD STORAGE: Two handy tool caddies.

User questions & answers

Question:	Will 1221 tail stock accept #2 Morse taper drill chuck
Answer:	Yes! Just be sure that the tail stock hole and morse taper are clean, otherwise the #2 morse taper can be difficult to remove...
Question:	has this lathe have a indexing head
Answer:	William, yes this lathe has an indexing head. I have not yet used the feature but it is done with a spring loaded pin which you lock into anyone of 24 positions. The spring loaded pin in screwed in once the pin is set to hold it in place.Rich F
Question:	Is this Ron Swanson approved
Answer:	Yes, Ron personally blesses each unit as it’s loaded onto a truck.
Question:	Do you need to move a belt to change speeds? Or is there a dial or switch
Answer:	This lathe has a variable speed controller, so the speeds may be changed using the simple rotating knob. To provide speed ranges to suit any situation, especially for the more experienced turner, there is a three step pulley. This arrangement allows the variable speed controller to adjust speeds from 60 to 900 rpm on the low step of the pulley, 110 -1800 rpm on the 2nd step (medium), and a high speed range of 220 -3600 rpm on the the 3rd step. The belt need only be changed if you want to move to a different range of speeds. This is a very simple process.

Product features

JET 12'' X 21'' Variable Speed Wood Lathe - JWL-1221VS

The JET 1221VS lathe is different from anything we’ve made before. In truth, it’s different from anything that anybody has ever made before. The design is better. The features are better. The entire turning experience is better. And it all focuses on one concept … Control.

Product description

The JET JWL-1015 is an ideal choice for the novice woodturner looking for an affordable, user-friendly first lathe, as well as the advanced enthusiast or professional who wants to add a full-featured mini-lathe to the shop. This sturdy, smooth-running 15” mini-lathe has the power, precision and versatility to turn out any number of projects. When you're ready to make your ideas a reality... start here.

• 15-1/2" BETWEEN CENTERS
• SIX SPINDLE SPEEDS: 500/840/1,240/1,800/2,630/3,975
• Integrated 24-position indexing
• IMPROVED TENSIONING SYSTEM: Easier access to belts.
• INCREASED RIGIDITY: Wider bed ways.

User questions & answers

Question:	Can you add an extendion table on it to turn long spindel legs
Answer:	Yes! You just can't buy it on amazon..rockler and woodcraft sell them for around $150.
Question:	Is it a Morse taper
Answer:	Yes both the head stock and tail are #2
Question:	what is needed with this lathe for pen turning
Answer:	Basically, you will need a 7mm MT2 mandrel and your tools. When you order your pen kits, make sure you get the bushings and drill bit. Depending on how you finish the pens, you may need a buffing system. For acrylics, get a set of micro pads, they really bring the shine out. I also use a "french polish" and shellac to put a lasting hard coat on the finished product. Good luck and enjoy the lathe.
Question:	what is the thread size on the head stock
Answer:	Headstock Spindle Thread is 1" x 8 TPI.Complete data sheet is here:http://content.jettools.com/assets/manuals/719100_man_EN.pdf

Product description

10" x 18" Lathe #70-105 was designed specifically at the request of pen turners who wanted a sturdy, dedicated machine for their craft. This scaled-down, basic mini lathe is constructed of cast iron so vibration is not a factor, unlike other lathes made of aluminum. 5 Speed ranges cover the bases for boring barrel holes, roughing out pen billets, turning to shape and finishing. Lathe includes a live center, tool rest, knock-out bar and wrenches.

• Rikon mini lathe: This Rikon mini lathe features a ½ motor that provides ample power for all turning needs. With a 10” swing and 18” between centers, this mini lathe also has a self ejecting tail stock and has easy access to speed change.
• Sturdy and Dedicated: Designed specifically at the request of pen turners who wanted a sturdy, dedicated machine for their craft. This scaled-down, basic mini lathe is made from cast iron, so vibration is not a factor, unlike other lathes made of aluminum.
• 5 speed ranger: This mini lathe has a 5 speed range that covers the bases for boring barrel holes, roughing out pen billets, turning to shape and finishing.
• Includes: This lathe includes a live center, tool rest, knock-out bar, and wrenches.

User questions & answers

Question:	Does the headstock have a morse taper and also the tailstock
Answer:	Yes they are both #2 taper
Question:	Does this lathe have a 1 inch 8tpi
Answer:	yes
Question:	Does Rikon or another manufacturer make a steady rest for this lathe
Answer:	Carter products and Ron Brown's Best (Peacetree), make steady rests suitable for. 10 inch lathes. Carter Products is about $375 and Ron Brown's Best is about $160. I believe either can be adapted to Rikon 105, 10" lathe.
Question:	can a veriabule speed drive add to this lathe
Answer:	You can buy a conversion kit from Penn State. It comes with a new motor and electronics. Note that the lowest speed is 650 vs 500 RPM which is faster that recommended if you use Cole Jaws.

Product description

The new JET 1015VS is an ideal choice for the novice woodturner looking for an affordable, user-friendly first lathe, as well as the advanced enthusiast or professional who wants to add a full-featured mini-lathe to the shop. This sturdy, smooth-running 15" mini-lathe has the power, precision and versatility to turn out any number of projects. When you're ready to make your ideas a reality... Start Here.

• 15-1/2" BETWEEN CENTERS
• THREE SPEED RANGES: 200-1,050 / 300-1,750 / 600-3,600
• INTEGRATED 24-POSITION INDEXING
• EASY ACCESS TO BELTS: Improved tensioning system
• INCREASED RIGIDITY: Wider bed ways

User questions & answers

Question:	Does this lathe come with a stand
Answer:	No but one if available as an accessory.
Question:	Can I get parts in Canada for this lathe? Can it be shipped to canada
Answer:	CPO Outlets does not ship to Canada. For support in Canada, please contact Jet directly for guidance at 888-274-6848.
Question:	How accurate is the headstock to tailstock alignment
Answer:	As best I can tell, on mine it is very accurate.
Question:	Does this lathe have a reverse
Answer:	No, mine doesn’t. The larger, more expensive models may.

Product features

JET 10" x 15" Variable Speed Wood Lathe - JWL-1015VS

The new JET 1015 is an ideal choice for the novice woodturner looking for an affordable, user-friendly first lathe, as well as the advanced enthusiast or professional who wants to add a full-featured mini-lathe to the shop. This sturdy, smooth-running 15” mini-lathe has the power, precision and versatility to turn out any number of projects. When you're ready to make your ideas a reality... Start Here.

Product description

Includes Reversible NOVA G3-D Woodturning Chuck - 46-461.

• Auto-Stop Jaw Slides inhibit the widening of the chuck jaws beyond their optimum clamping range insuring the material is properly secured
• Anti-Release Spindle Lock is an exclusive DELTA feature that ensures the chuck will stay securely mounted on the lathe during forward and reverse turning applications
• Enhanced jaw gearing provides extra smooth jaw movement and increased clamping pressure for maximum material support
• Threaded chuck jaws increase surface contact with the material offering more secure clamping

User questions & answers

Question:	What is the maximum rpm this chuck is rated for
Answer:	The max speed you would use has more to do with the diameter and the complexity of the item on a wood lathe. If you are bowl turning I have been told a 6" bowl can be turned safely between 1000-1500 rpm by this rule, a 9" bowl at a maximum of 1000 rpm, a 12" bowl 500-750rpm and so forth. Finials could be turned at 2000 rpm. This chuck can easily handle all of that. Hope this helps.
Question:	Will this fit my delta 1642 lathe without adapters
Answer:	This chuck is pre-threaded at 1" 8 threads per inch. The 1642 lathe is most likely 1.25" or 1.50" and 8 threads per inch. So, most likely you will need an adapter.
Question:	is this self centering? whats the max size stock it can handle
Answer:	Yes they are self centering. I believe they can handle stock about 4 1/2 inches. I had bought a different chuck that cost almost as much as this one, but only had one set of jaws. I sent it back, and got this one. It is the best thing that I have bought for turning wooden boxes, and bowls. It seems to be very good quality at a very reasonable price. I got another set of jaws that will hold up to 8" on Amazon for $31.19. The item # is PSI Woodworking CJAWFJ2 Jumbo Flat jaws. I hope this helped.
Question:	Every time i clamp a piece of wood into this chuck, it spins free as soon as i apply any pressure with a tool. what am i doing wrong
Answer:	What's spinning, the wood or the chick? I'll try and help but without seeing what's going on I'm not sure I can help. Ok so the first thing your doing is rotating it on your lathe, then your tightening the hexnuts that are on the chuck 2 of them. Then your putting your wood into the chuck and tightening it fully with your chuck key. After that you should be able to bring up the tail stock and lock it in place, then turn the handle until the wood is snug in between centers. Best of luck, hope this helps. You might also check some YouTube videos on getting set up.

Product features

Precision Machining

The Delta Industrial Reversible Nova G3-D Wood turning Chuck is designed to offer you the latest innovation for professional turning results

Product description

12-1/2" x 24" VSR MIDI Lathe. 1HP motor delivers all the power you need for turning spindles to large bowls or platters.. Big turning capacity of 12-1/2" diameter swing and 20" between centers.. 24 Postion Index head allows accurate pattern or design work on projects.

• 1HP motor delivers all the power you need for turning spindles to large bowls or platters.
• Big turning capacity of 12-1/2" diameter swing and 20" between centers.
• 24 Postion Index head allows accurate pattern or design work on projects.
• Electronic variable speeds 250-3850RPM with LED display and forward/reverse functions.

User questions & answers

Question:	What taper is the headstock and talestock
Answer:	Hi W James,Both are #2 Morse tapers. Hope that helps!
Question:	What is the tool post diameter
Answer:	Tool post dia. is 1"
Question:	Wich are the dimensions of the lathe
Answer:	Thank you for your questions Jose T. The machine dimensions are 40-3/4" L x 12" W x 17-5/8" H. I hope this helps.
Question:	Does the head have a 1 x 8 thread pattern
Answer:	Hello Robert,Yes, it is 1" x 8 TPI. Good question.

Product description

Includes Midi-Lathe Stand - 46-462.

• Midi-Lathe stand provides a mobile and stable work support for the 46-455 and 46-460 Midi-Lathes
• On-board tool storage makes your work area more organized and safer.

User questions & answers

Question:	Will this stand (including one extension section) fit the Delta LA200 lathe with one bed extension
Answer:	no, will not accommodate the extension. That must be purchased seperately
Question:	Is this suppose to come with hardware? Cause mine did not
Answer:	You should have gotten assembly hardware... Nuts bolts washers.... You will probably have to provide hardware to mount your lathe.
Question:	Will this work on my 46-701 lathe
Answer:	I believe the mounting hole spacing on your lathe is different. I am not familiar with this model but looked at it on line and it definitely looks like a wider spacing.
Question:	Will this stand fit a model 46-250 midi lathe
Answer:	Here is what is on delta website. MIDI-LATHE® Stand provides a mobile and stable work support for the DELTA® 46-455 and 46-460 MIDI-LATHES

• VARIABLE SPEED - This 12 x 18" wood lathe is featured with 550W powerful motor and variable speed with digital readings for you to work with precise speed
• WORK CAPACITY - Swing over bed 12" (300 mm). 18" (457 mm) distance between centers, swing over bed 10" (254 mm), 6" (150 mm) tool rest, 3" (75 mm) face plate, top drive and live center
• STABLE OPERATION - Cast iron constructed wood lathe with rubber feet, providing increased stability and smooth operation
• DELICATE WORKMANSHIP - All gears and shafts in headstock have been precisely grounded and hardened for longer service life and mute operation. High quality electronic units are applied throughout the machine
• APPLICATION - Bench top wood lathe, an ideal tool for use in labs, workshops, engineering and education

User questions & answers

Question:	Where is it made
Answer:	The unit sets on my lathe bed and the screw goes through it and connects to the other part under the lathe rails to anchor it to the lathe
Question:	What is yhe size of the spindle screw? not the bore but the threads. 1' 8tpi, 1.25 8tpi (threads per inch
Answer:	it should it fit my nova miney lathe
Question:	this unit comes with no instructions? there is a parts bag with no explanation on any of it or what its ? there website does not have any info at all
Answer:	I don't know, but on the lathe I have, I had to purchase a longer screw to hold the steady rest on the rails.It worked well fro me. I haven't seen the Delta 46-460 lathe.Enjoy working on the your lathe, it will give you ours of fun.
Question:	What is the thread count
Answer:	I haven't really tried to see how big it can get, I think it could probably work for nearly ten inches, maybe more. I was surprised by how sturdy it is, and have been very pleased with it

Product features

Powerful Motor

550W Power motor, turning speed 500-3800 RPM, Voltage: 120V/60Hz. Our powerful motor starts softly to offer motor's maximize safety and low noise design.

Variable Speed

Variable spindle speed of 500-3800 RPM

High precision, able to turn out standard qualified works

Longer operating life, high torque

Large Work Capacity

MT2 headstock and tailstock taper, 18" (460 mm) distance between centers, swing over bed 12" (300 mm), 6" (150 mm) tool rest, 3" (75 mm) face plate, top drive and live center.

Stable Operation

Cast iron constructed mini lathes is of increased stability and smooth operation.

Rails have been quenched with high frequency and elaborate milling

Digital Readout

Speed infinitely variable, easy to read via digital speed display

Wide Application

Bench top wood lathe, an ideal tool for use in labs, workshops, engineering and education.

Specifications

• Power: 550W, 110V/60Hz
  • Distance Between Centers: 18" (460 mm)
  • Swing Over Bed: 12" (300 mm)
  • Tool Rest: 6" (150 mm)
  • Face Plate: 3" (75 mm)
  • Taper of Spindle Bore: MT2
  • Range of Spindle Speeds: 500-3800 RPM infinitely variable
  • Taper of Tailstock Quill: MT2
  • Gross Weight: 88 lb (40 kg)
  • Package Dimensions: 34"* 19"* 12" (84* 46* 30 cm)

• Motor: 3/4 HP, 110V, single-phase, 8A
• Swing over bed: 14"
• Swing over tool rest: 10"
• Distance between centers: 20"
• Tool rest width: 8"

User questions & answers

Question:	is it 5.3 amp
Answer:	The power Requirement is 110V, Single-Phase, 60 Hz. It has a full-load current rating of 8A. The minimum circuit size is 15A.
Question:	How much dose this weight
Answer:	The machine weighs 110lbs.
Question:	Does it have the option of outboard turning
Answer:	Yes. The outboard spindle thread direction is right handed. The outboard spindle size is M20 x 1.5.
Question:	Is this lathe reversible
Answer:	The G0844 14" X 20" Variable Speed Benchtop Wood Lathe does have a forward and reverse setting.

Product features

3/4 Horsepower 14" x 20" Variable Speed Benchtop Wood Lathe with Digital RPM Tachometer

Our largest swing benchtop lathe, this machine will take your projects to the next level. Its 20" x 14" capacity can turn a large range of spindles and bowls, and it's 15° indexing spindle supports veining and fluting operations - something you can't do on most other benchtop models! The G0844 features a generous 8" tool rest, built-in carry handles on both ends that double as tool storage, rear cord wrap, an easy-access door for changing speed ranges, and a variable-speed spindle-speed tachometer, all cast iron construction, and adjustable vibration-dampening rubber feet. You'll see why we call this the Benchtop Boss!

Easy-Access Door for Belt Changes

Variable Speed - Three Speed Ranges

8" Tool Rest with 1" Post

Carrying Handles on Each End that Double as Tool Holders

Specifications:

• Motor: 3/4 HP, 110V, single-phase, 8A
• Swing over bed: 14"
• Swing over tool rest: 10"
• Distance between centers: 20"
• Tool rest width: 8"
• Tool rest post size: 1"
• 1" x 8 TPI RH headstock spindle
• MT#2 spindle & tailstock tapers
• Indexing spindle: 15°
• Variable speed: 300-3300 RPM

Product description

Includes Midi-Lathe Modular Stand Extension - 46-464.

• Midi-Lathe modular stand extension provides a mobile and stable support for the 46-463 bed extension. For use with the 46-462 Midi-Lathe stand.
• Modular design allows multiple extensions to attach to each other for support of multiple bed extensions. One stand extensions is required for each bed extension addition .
• Delta 46-460 Wood Lathe NOT included with 46-464 Midi-Lathe Modular Stand Extension

User questions & answers

Question:	Does this work on 220 vac
Answer:	No, it is wired for 120v ac.
Question:	Will this stand fit the
Answer:	Yes, but you need both the lathe 46-460 & the standard base 46-462 first. In past years the extension had poor machining quality control but recent reviews do not complain about this.
Question:	I want to know how many pieces or what pieces are included in the price
Answer:	This image shows what parts are in 46-464. Some bolts and nuts are also included. Note that part number 3 does not fit in the threaded part number 2. Part number two must be re-threaded for 3/8" x 16 (NC). https://drive.google.com/open?id=1BkmEh0IsYZV_PBeaMqSXXY0_RgMk0PZu
Question:	will this stand work with a model 46-250 with a extension
Answer:	It will not fit the 46-250. As that lathe was designed for bench top use no stand was developed for it. According to delta website.

Product description

Remember when you could turn your own pens? Fill your house with as many pens as you can with the WEN 8-inch by 12-inch variable speed mini wood Lathe. Adjust the variable speed anywhere from 750 to 3200 rotations per minute. The WEN 8-inch by 12-inch variable speed Benchtop wood Lathe features an MT1 spindle and Tailstock taper to tightly grip workpieces, two tool rests (4-1/2 inch and 7 inch) to provide needed support for chisels and tools during operation, and a 3.2-Amp motor to keep things turning. The easy-to-use Lever clamping system makes adjustments to both the tool rest and the Tailstock simple and precise. The WEN wood Lathe also includes a flat wrench, a headstock spur center, A Tailstock cup center, A knockout rod and a 2.3-Inch faceplate for non-spindle work pieces. And, because its a WEN product, your Lathe comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line. Remember when you could turn pens, chess pieces and more? Remember WEN.

• Perfect for pens, bowls, cups, chess pieces, and other small workpieces
• Fits workpieces up to 12 inches long and 8 inches wide
• 3.2-Amp motor provides over 50% more power than most 8-inch wood lathes
• Adjust the soft start variable speed motor anywhere from 750 to 3200 RPM
• Features a 2.3-Inch face plate, an MT1 spindle and tailstock taper, and two interchangeable tool rests

User questions & answers

Question:	Anybody know the thread size for the three tapped mounting holes on the underside of the lathe
Answer:	From their website: Benchtop mounting bolts: 0.30 Inch x 20 TPI (M8 x 1.25 pitch)
Question:	can you use a dedicated pen drilling chuck on this on this model 3420 or will it burn up the motor. I want to drill my blanks with it to
Answer:	I use a drilling chuck for all my pen blanks. As suggested, drill slowly, and frequently pull out the drill to remove shavings, as the blank may overheat and split.
Question:	How long did it take for you to get it? Says it ships in 2 months, with Prime
Answer:	When bought this lathe, they sent me 2. That being said, I got it when they said I would get it.
Question:	I'm interested in buy this lathe, does it run with 220 v or 150v, here were I'm living we run only 220. Waiting for answer, regards
Answer:	110

Product features

WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe

You will now easily be able to fit work pieces up to 12 inches long and 8 inches wide with the WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe. The minimal design is ideal for pens, bowls, cups, chess pieces, and other small work pieces. You will be able to take on larger projects around your home with this tool.

Straightforward, Sturdy and Easy to Operate

With a stunning build quality, the WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe provides sturdy frame for various work pieces. Made from cast iron, features a 2.3 inch face plate, an MT1 spindle and tailstock taper and two interchangeable tool rests for added versatility.

Product description

Powermatic 3520C 35"x20" Lathe, 2HP, 1PH 220V (1353001)

• SIMPLE, PRECISE INDEXING: Headstock contains a digital readout.
• CUSTOMIZABLE VERSATILITY AND SAFETY: Position the magnetic-backed moveable control box where it is most ideal.
• MAXIMUM COMFORT WHEN TURNING: Riser blocks allow for four inches of height adjustment.
• SELF-EJECTING, LASER-ETCHED QUILL
• INCREASED USER PROTCTION: Fully-enclosed VFD.

User questions & answers

Question:	length and diameter of wood that can be used
Answer:	They are large pom poms, approx 14 inch. Full shape and bright colors make them more noticeable,suit for sports events cheer up.
Question:	What is the bed swing on this lathe
Answer:	Yes. You just have to hand fluff to make them full. Kind of a lot and often. It is very full after kneading, because the material is sufficient. It is much more full than low-priced pom poms cheerleading.
Question:	What's the max rpm on this
Answer:	NO. If you remove the zip, the pom poms immediately breaks.
Question:	Does anyone have advice how to move this? I assume the freight company will just dump it on my driveway
Answer:	At this time, we only sell this item individually. But you are able to order this item in any quantity you need. Thank you

Product features

Powermatic 3520C Lathe, 1353001

The Powermatic 3520C is the fourth evolution of the time honored lathe with many new and improved features. The 3520C has retained all the features of the prior models such as the sliding headstock, electronic variable speed with low and high speed ranges, the spindle lock, digital RPM readout, and a laser etched quill that is self-ejecting.

The enhanced features include a movable control box for maximum versatility, adjustable riser blocks for 6 inches or more of height adjustment, and an increased weight of 726 LBS (814 LBS with the bed extension).

Additional features include a new ergonomic spindle lock design, a digital indexing readout, an Anti-rotation tailstock key for smoother operation, a set of dead centers which hold a spindle for visual comparison, a two position mount for the optional bed extension, and a sliding hammer knockout rod with brass tip.

Features

- Moveable control box for customizable versatility.

- Main power disconnect switch located on rear of headstock.

- Self-locating ergonomic spindle lock design for easy, one handed operation.

- Upgraded banjo features a non-marring, pinch style clamp for solid tool rest placement.

- Extended spindle nose increased access to the work piece.

- Adjustable Risers Blocks for 6-inches of height adjustment allowing maximum comfort when turning.

- Tailstock incorporates Anti-rotation key and Acme threads for smoother operation and increased longevity.

- Digital Indexing Readout simplifies the indexing process for added precision.

- Fully enclosed VFD for increased user protection.

- Able to maintain speeds as low as 15 RPM.

- Increased Weight to 726LBS (814LBS with bed extension) for the most stable turning experience possible.

- Increased working capacity to a full 35 inches between centers.

- Optional safety shield.

- Following strict guidelines and electrical requirements, these Powermatic 3520C Lathes are CSA Certified.

Robust 2-Horsepower 220V Motor

Robust 2 HP motor offers more consistent performance while being able to turn as slow as 15RPM.

Anti-rotation tailstock key

Tailstock incorporates anti-rotation key and Acme threads for smoother operation and increased longevity.

Moveable control box

Moveable control box for customizable versatility across the entire body of the lathe.

Adjustable risers

Adjustable riser blocks for 6-inches of height adjustment allowing maximum comfort and customization when turning.

Product description

1/3 Horsepower bench top lathe with variable speed motor

• Motor: 1/3 HP, 2 Amp, 110V, Single-phase, 60 Hz
• 12-inch distance between centers
• 8-inch swing over bed
• Cast iron construction and infinitely variable speed control
• Includes two tool rests

User questions & answers

Question:	I have a chuck that is 1"-8tpi female thread (nova 48111), it doesn't fit on this lathe. what adapter should i buy
Answer:	Buy a 3/4" 16 TPI to 1" 8 TPI adapter. If you further questions go to http://www.woodturningz.com/downloads/w1704_ds.pdf for the specs on this machine.
Question:	is there an adapter for the face plate for mounting live center chucks? I bought one but won't line up with holes
Answer:	I'm not sure if they make the adapter to mount on the face plat. I have a 2" diameter three jaw,self centering scroll type chuck that i bought from Amazon that ihave used that works great,but i think that the holes in the face plate is for mounting a backing block to the piece of wood stock to turn a bowl. It says in the manual that you glue the block to the wood your turning and use the holes to screw the block on to face plate. Hope this helped.
Question:	What size wood stock can it hold? How about something like 12'' long by 8" wide piece of wood
Answer:	The length it will hold will be dependant upon what chucks you have in the head and tail stock. The bulkier the chucks, the shorter the length it will handle. I'd say it will hold 12" lengths unless your chucks are sizable. I wouldn't try more than 4" width stock unless it was short. Although the lathe may hold the stock, it would be too much for the motor. The intended purpose of this lathe is to make small things like ink pens, Christmas ornaments, small toys like tops or yo-yo's and tool handles etc. If you want to mount 12" X 8" stock you should be looking at full sized lathes.
Question:	is there anyway to secure to a bench
Answer:	Yes. It has has three holes in the base that you can bolt it down with. I bolted mine down on a metal stand. It holds it down real solid. Mine is the Shop Fox W1704 also. It is well built. I really like mine. Hope this helps!

Product features

Shop Fox W1704 Benchtop Wood Lathe

Tackle pen turning or other small cutting or shaping projects using the Shop Fox W1704 bench-top lathe from Woodstock International. Made of cast iron, and designed to fit neatly on a workbench, this lathe features a 1/3-horsepower, variable-speed motor and delivers spindle speeds between 700 and 3,200 revolutions per minute (RPM). It also features a safety paddle switch, an MT No. 1 spur center, an MT No. 1 live center, 4-1/4-inch and 7-inch tool rests, a 5-3/4-inch faceplate, and a 3/4-by-16-inch TPI RH spindle.

Includes Two Tool Rests

The W1704 includes both a 4-1/2 and 7-inch tool rest for various turning applications and with a 13-inch distance between centers and an 8-inch swing over the bed this lathe is ideal for a variety of turning projects.

Variable Speed

The infinitely variable speed from 700-3200 RPM comes in handy when turning hard or soft species of wood.

5-3/4-inch Faceplate Included

This benchtop lathe includes a 5-3/4-inch faceplate which threads onto the headstock spindle for non-spindle turning (usually used for making bowls or other items that cannot be supported from the tailstock).

Product description

NOVA 48232 G3 Reversible Wood Turning Chuck is a 4 Jaw self centering geared chuck, exclusively designed for the NOVA 46000 Comet II Midi Lathe. It comes with a Reverse Lock feature that enables the chuck to be locked securely onto the lathe spindle when using the forward and reverse functions on the NOVA 46000 Comet II Lathe. It has a dedicated 1-Inch8TPI thread and is only able to be used on the NOVA 46000 Comet II Lathe. This chuck comes standard with the unique NOVA features such as Auto Stop, Copper composite Jaw Slides, Woodworm Screw, Comfortable T Bar Handle and 2-Inch Jaws as standard, this chuck is fully featured. Powerful Tuff Lock gearing with precise, hardened action delivers incredibly smooth strength for a solid, vibration free performance. Takes the same accessory range as other NOVA Chucks. Awarded Best Value in Chuck Test by Wood Magazine Sept 2011. Designed by the innovators of the 4 Jaw Chuck for wood turning, Teknatool International - since 1955. Backed by a full replacement 2-year warranty, call our customer service center toll free on 1-866-748-3025.

IMPORTANT NOTICE

Safety Advisory! Only use authentic NOVA accessories on your NOVA chuck. Using non genuine NOVA and copies of accessories could lead to operation and safety issues and will void our market leading warranty. NOVA accessories are designed for use only on NOVA Chucks. Do not use on any other chuck.

• Anti-Release Spindle Lock, ensures chuck will stay securely mounted on the NOVA 46000 Comet II Midi Lathe during forward and reverse turning
• Dedicated to fit 1" x 8tpi lathe spindles. Accepts full range of NOVA Chuck Accessories
• Open back for easy cleaning
• Fast comfortable T Bar handle
• High powered Tuff Lock gearing delivers outstanding grip for little effort

User questions & answers

Question:	Can this chuck be used on the Jet 10141 lathe if not why not
Answer:	Your Jet 10141 is a mini lathe no longer a production model. It does have indexing (good); indexing is a sought after feature and frequently used. It does have a 1X8 thread on the head stock; also good. that means it will accept your Nova G3 which is a high-end chuck and will last a life time. When you move to a full size lathe and you will if you hang in there; it will still be a great chuck, it may simply require an adapter for the new head-stock thread, 10 bucks. The G3 is a midi chuck with so much versatility that it should be in and probably is in every woodturners arsenal. You simply cannot go wrong here. It is appropriate for mini to midi to full size. Add to it as you are able; cole jaws, mini jaws, etc. build a steady rest for your mini, it may sound like overkill on a mini but you will want to do hollow forms with this and wine glasses, weed pots and certainly elements.The very best addition to this chuck would be without knowing your skill level or whether your chisels are the new Carbides or traditional or a mix of both would be: Doc Green's "Fixtures and Chucks for Woodturning" absolutely indispensable. One copy for the shop with punch wholes in a 3 ring binder, one copy for arm chair reading. Worth the price.The other indispensable would be to join your local woodturning club, worth more than anyone can imagine.Good Luck; enjoy turning, also see Kurt Hertzogs articles on becoming a pen maker instead of a pen turner. Wood Turning Design Magazine. It's a creative world out there so enjoy. Brad~Scott
Question:	Is this the chuck only or does it come with a set of jaws like in the pictures? If it comes with a set of jaws what range in inches does it hold
Answer:	It does come with jaws as pictured. For full range details, this is your best source: http://teknatool.com/products/Chuck_Accessories/50mm.htm
Question:	Does this chuck work on the Jet 1221vs lathe? It does have a 1" by 8tpi but im not sure about the direction because I dont have it yet
Answer:	Well, I must have bought the odd ball because it does not fit my Lathe.. THe lathe has an acme thread and the chuck doesn't. I bought the adapter and it still doesn't fit. The thread on the Jet 1221 is listed as 1"-8 ........... Very frustrating!!!
Question:	will this work on my harbor freight/excelsior mini lathe? what size stock will this accomodate
Answer:	Hi,This chuck id designed to work on any lathe with a 1" x 8tpi spindle, which I believe those 2 are. It will handle stock up to 10" with the 2" jaws included so that will cover those lathes. One thing to note - this chuck can also be used on reversing lathes and has the set screw to lock it to the spindle. If your lathe is not reversing and doesn't not have a register on the spindle (the register is the back part of the spindle on some lathes that is not threaded) don't use the set screw - the set screw should lock to the register, and not the threaded part of your spindle as it will damage the threads and throw the chuck off center. The set screw is only needed if you are reverse turning, and the chuck itself will work just fine on both reversing and non- reversing lathes.That help?

Product features

G3 Reversible Chuck

This NOVA G3 Reversible Wood Turning Chuck is a four jaw, self-centering, geared chuck exclusively designed for the NOVA Comet II Midi Lathe. It comes with a Reverse Lock feature that enables the chuck to be locked securely onto the lathe spindle when using the forward and reverse functions on the NOVA Comet II Lathe. It has a dedicated 1" x 8TPI thread and is able to be used with any lathe that fits those specifications. This chuck comes standard with the unique NOVA features such as Auto Stop, Copper composite Jaw Slides, Woodworm Screw, Comfortable T Bar Handle, and 2" Jaws as standard. Powerful Tuff Lock gearing with precise, hardened action delivers incredibly smooth strength for a solid, vibration free performance.

Special Woodturning Dovetail Profile on Jaws

The four jaw design firmly grips both round and square wood.

Special woodturning dovetail profile on jaws.

Safe Lock Woodworm screw included for fast mounting of rough timbers.

Auto Stop Safety Feature

Auto safety stop feature-jaw slides can't protrude past the chuck body.

Jaw slides made from high-tech copper fused steel for maximum hardness, wear, and self-lubricating properties.

Designed for the NOVA Comet II Midi Lathe (sold separately).

1" x 8TPI RH/LH threading-fits the Comet II Midi Lathe.

Up to 400mm/16" diameter swing capacity.