14 best jointer planer combos

Product description

PORTER-CABLE® PC160JT variable speed 6" jointer features a variable speed range of 6, 000 to 11, 000 RPM and Cutter head speed of 12, 000 to 22, 000 cuts per minute, allowing selection correct speed for material's size and hardness. Two-knife Cutter head, with Jackscrew knife leveling arrangement and built-in Cutter head Lock, allows for easy knife replacement and adjustment. Jointer is ideal for edging, flattening, or face jointing.

• Variable 6, 000 to 11, 000 RPM speed range allows the user to select the right speed for the size and hardness of material being cut
• Two knife cutter head with jack screw knife leveling arrangement for easy replacement and adjustment of knives
• Built-in cutter head lock facilitates knife replacement and adjustment
• Extra large table provides ample work support and Surfacing stock up to a full 6" wide
• Center mounted fence gives needed support throughout the cut for accurate edge jointing

User questions & answers

Question:	Can this jointer be attached to a 2 1/2 vac
Answer:	yes with a reducing adapter on your 2 1/2 vac
Question:	What is the recommended maximum board length that should be used with this jointer
Answer:	Maximum board length will depend on the strength of the operator and if/how well the jointer is anchored. I would think 8’ would be doable by most. Comes down to how well you can hold the workpiece down flat on roughly 16” of table before the blade.
Question:	What is the difference betwee the pc160jt and the pc160jtr
Answer:	Hello Kimberly, there is no difference. The actual model number is PC160JT. The JTR is a typo on Amazon. Porter Cable does not make a PC160JTR. Best Wishes!Tomboysupply.com
Question:	What material are the fence and table made out of
Answer:	I am 99% certan that the tables are cast aluminum, and the fence is aluminum. The weight, color and feel make this pretty evident. If it were cast iron it would weigh twice as much and be prone to rust. This jointer is as good functionally as any other. But because of its light weight it must be secured to a stable heavy base. It also needs a bit more tuning than other models. But if you are going to own any precision tools that is something you should become capable of.

Product features

Great for Woodworking

Making wood surfaces perfectly flat, these jointers are extremely versatile. From beginners to woodwork hobbyists, owning a good quality jointer is something that is crucial for your DIY projects around home. Do even more than just the general woodwork with a good quality jointer at your workshop.

Flatten and Square the Face of the Board

As a jointer allows you to make one straight surface and one flat surface, you will be able to shape and size wood according to accurate measurements. With DIY fences, table legs, chairs, frames and much more, you will be able to decorate your home with original masterpieces made by you.

Be in Complete Control

You will not have the hassle of losing control over this power tool as you will be able to adjust the speed range. You will be able to select the right speed fir the hardness and size of the material that you are using to cut. The extra-long table and center mounted fence also provides ample work support for an accurate cut.

Your Best Buddy for Cabinet Resizing

If you are enthusiastic about redoing your kitchen, you will adore a jointer. A handy tool for fitting doors and cabinets, you will be able to show off your creativity with a good piece of art. As a jointer’s versatility depends on the user, you will be able to get better at the handling with every use of this tool.

• 【PREMIUM QUALITY】- High-quality jointers woodworking equips the full metal workbench. With a maximum cutting width of 8 inches (20.32 cm), No-load speed：9000RPM/min, Power: 1500W, Feeding speed of 6M/min.
• 【TWO-IN-ONE DESIGN】- Combine a benchtop jointer and a planer in one unit, a two-in-one benchtop jointer can maximize workspace. A crank handle for easy adjustment of the height of cutter head; scale ruler for precise machining, automatic feeding design is available when it becomes a planer.
• 【CONSIDERATE DESIGN】- The dust exhaust interface can connect to dust collectors for easy cleanup of the flying wood chips to cultivate a clean working environment; This compact design of the jointer planer maximizes space-saving use.
• 【RELIABILITY & SAFETY】- Equipped with power-off protection electromagnetic switch, the over current protector, can be tripped when the motor is overloaded.
• 【WIDE APPLICATION】- Benchtop planer is designed for planing of old, weathered, rough and worn wood, and giving it an exceptionally smooth finish. Planers woodworking can be used for planning wood, bamboo, lining nylon, etc.

User questions & answers

Question:	Is this 110v or 220v
Answer:	I've been doing a lot of overclocking with this card and as of right now I'm at a 125 offset on the core clock and a 1100 offset on the memory and haven't had it hit 75°C yet this card is incredible!

Product features

All-Metal Workbench

With a smooth and durable table surface, the wood planer benchtop can reduce damage to the surface of the material. The red cutter head guard helps you avoid accidents caused by a slippery grip.

User-friendly Crank Handle

Easily adjust the height of the cutter head with the crank handle, scale ruler for precise cutting depth. The oversized, ergonomic knobs are extremely user-friendly, providing you with an excellent experience.

2 IN 1 Function

This wood planer adopts the two-in-one design, combining a benchtop jointer and a planer in one unit. At the same time, lock the planing and jointing tables to ensure precise cutting and improve the efficiency.

Dust Exhaust Interface

The thickness planer can be connected to dust collectors to remove the trouble of flying wood chips and keep the working environment clean.

Heavy-Duty Stand

With detachable heavy-duty steel stand, it provides more convenient user operation and prevents the wood jointer form walking or wobbling during the process.

Safety Precautions

Power-off protection electromagnetic switch and over current protector are equipped, ensuring security during the delta jointer work.

• 【PREMIUM QUALITY】- High-quality jointers woodworking equips the full metal workbench. With a maximum cutting width of 6 inches (15.24 cm), No-load speed：9000/min, Max. Planing width：156 mm. 
• 【EXCELLENT PERFORMANCE】- All-copper motor with high power effectively improves the cutting speed of the benchtop jointer. Two handles for easy adjustment of the height and width of cutter head; scale ruler for precise machining.
• 【CONSIDERATE DESIGN】- The dust exhaust interface can connect to dust collectors for easy cleanup of the flying wood chips to cultivate a clean working environment; This compact design of the jointer planer maximizes space-saving use. 
• 【RELIABILITY & SAFETY】- Equipped with power-off protection electromagnetic switch, the over current protector, can be tripped when the motor is overloaded.
• 【WIDE APPLICATION】- Benchtop planer is designed for planing of old, weathered, rough and worn wood, and giving it an exceptionally smooth finish. Planers woodworking can be used for planning wood, bamboo, lining nylon, etc.

User questions & answers

Question:	What is the amperage of the motor
Answer:	It is a 10 amp
Question:	what is table made of
Answer:	I'm still waiting for it arrive. Give me a couple days and I'll be glade to let you know all about it!
Question:	Yo vivo en Holanda donde la energia es a 220 y no a 110, porque ofrecen este producto para esta zona si no tienen
Answer:	This planer must be connected to a 110/120 source. To run it on 220 you have to have a voltage converter to convert electrical to 110/120.
Question:	If I had to choose between a jointer and a planer which should I choose
Answer:	The two tools kind of go together; you flatten one side of a board on a jointer, then get it so that it is all the same thickness with a planer. That said, you can use a planer to make a board flatter, but it won't be perfect. Start by running the board through on it's most stable side, making sure to go with the grain and just take a minimal amount off of that side, say a 1/16th or less so that you just get the high points. Flip the board and do the same thing on the other side, again a minimal amount, until you've got both sides fully planed. If your board is bowed, take most of your cuts on the high side, and it will lessen the tension that's causing the bow; again, it won't be perfect, but it should be better.
Question:	Is this chain or belt driven
Answer:	it is belt driven
Question:	What width of board will this plane
Answer:	There is actually 13" between the guides, but I don't think I'd try putting anything bigger than 12 1/2" through it. The board could pinch if it gets cocked in there. Remember that you need to take into account the width of the board you want to plane (whether wide or narrow) and also the density of the wood as you lower the cutter heads after each pass. If I'm planing something such as Douglas fir, I turn the crank down 1/2 a turn. If I'm doing something like maple, I'll only turn the crank down a 1/4 or even a1/6 of a turn, especially if it's a wide board, too. When you put your board through for the first pass, if you have a 3/4" board for instance, you may want to set the depth gauge a little bit higher...it won't hurt anything if it's too high, but if there's any sort of crown or twist to your board, it will keep the machine from bogging down. Same goes when you're lowering the depth gauge, if you're not sure, err on the side of caution. The material that your planer spits out should be paper thin, about a 1/4" wide, and 2 or more inches long. If it's just a bunch of little chips, say 1/4" x 1/2", you're probably planing against the grain. Flip the board over the narrow way, and send it through again. Once you've been doing it for a while, you'll be able to tell from the sound of the machine if you're going against the grain or trying to take too much off at once. Oh, one other thing, I have found that it you can't find 13" replacement blades, 12-1/2" ones will work, you just have to be careful to keep your board 1/4" to 1/2" away from the edge guide.

Product features

Create Flat Surfaces with Ease

With the Delta Power Tools 22-555 13 In Portable Thickness Planer, you will be able to experience a powerful 15A motor that is capable of handling the most demanding jobs. The four column design of this tool provides excellent stability for smooth, accurate planning.

Simple to Use

The Delta Power Tools 22-555 13 In Portable Thickness Planer includes a quick-change knife system with dual edge disposable knives, that allows you change the knives with ease to use alignment jigs.

Support for Long Work Pieces

This tool comes with adjustable infeed and outfeed tables to better support long work pieces and to reduce snipe. Additionally, a reversible dust port allows you to collect chips from the right or left side of planer, making it simple for you to clean up after.

All-Metal Workbench

With a smooth and durable table surface, the wood planer benchtop can reduce damage to the surface of the material.

User-friendly Crank Handle

A handle can be moved back and forth, cutting with a sharp knife edge. The other handle can adjust the height of the backing, suitable for processing wood of different thickness.

All-copper motor

The motor, made of pure copper wire, can withstand high temperature. Unlike the aluminum wire motor or copper-clad aluminum motor on the market, it has a longer service life.

Dust Exhaust Interface

The thickness planer can be connected to dust collectors to remove the trouble of flying wood chips and keep the working environment clean.

Safety Precautions

Power-off protection electromagnetic switch and over current protector are equipped, ensuring security during the delta jointer work

Wide Application

Planers woodworking is widely used in solid wood planing, construction planning wood, DIY wood products, woodworking decoration. Designed for planing of old, weathered, rough and worn wood, and giving it an exceptionally smooth finish.

Product description

JET JJP-12 12" Planer/Jointer, 3HP, 1PH 230V (708475)

Combining a jointer and a planer into one machine, the Jet JJP-12 12-Inch Jointer Planer is a powerful, space-saving tool ideal for creating an even surface and thickness on your work piece. Custom built for smooth transition between functions, it ensures precise cuts with features including three high-quality knives, an adjustable outfeed table for supporting long work pieces, and large, ergonomic knobs for extra-fine adjustment control.

• RAPID CUTS: Three, high-speed, steel knife cutter head provides rapid cutting and a superior finish.
• ADAPTABLE: Extrmemly quick changeover between jointing and planing functions. Fence does not need to be removed.
• STABILITY: Heavy-duty, one-piece steel closed stand (includes mounting tabs).
• EFFICIENCY: Built-in dust chute with 4" dust port is used for both jointing and planing operations.
• ACCURACY: Heavy-duty cast iron tables with a machined finish ensures accuracy and flatness.

User questions & answers

Question:	Is this jointer / planer belt driven
Answer:	Well, your thoughts on who this is designed for seems a bit sarcastic. I ordered this by looking at my height and weight. I am 5'11" and weigh 172 pounds. If you look at the chart, that is a US Medium. It fits surprisingly well. You do not say anything about your weight and height. Therefore, I leave it up to you to decide based on how tall you are and your weight. I have at least SIX of these in this size and I see no variation in quality and fit.
Question:	I have a 20 amp, 120 volt outlets in my garage. I can buy a voltage converter to get 240 volts. Will the machine draw more than 10 amps at 240 volts
Answer:	Yes we have black. Should be back in stock soon. Email Josh @ KafGrooming .com to be added to waitlist.
Question:	Can this run off of a standard grounded 110v outlet? The specs here indicate that it can, but reviews and the manual from JET's website mention 220v
Answer:	It will turn your skin black if you use a lot and get it directly on the skin. With a crew cut it would be hard to not get it directly on this skin.
Question:	Can you upgrade to the segmented cutterhead in the future? If so, where can one be found
Answer:	The product comes out as a cream base. If you have tried out American Select Styling cream it is very similar to this consistency

Product features

JET JJP-12 Jointer-Planer

A frustrating choice woodworkers often face is whether to get a jointer or a planer first. That choice is made more difficult because these machines compliment each other to dimension, square and smooth the wood. The new JET JJP- 12 Jointer-Planer eliminates that problem and brings both capabilities to your shop in one accurate, durable and economical package.

The JET JJP-12 Jointer-Planer is based on a heavy-duty, fully welded steel base cabinet that houses the motor along with the planer table mechanism. The cabinet also provides solid mounting for the associated controls as well as supporting the jointer table and fence assemblies.

Features:

The JET JJP-12 Jointer-Planer features a 3HP, 230V, 12.5A, 1Ph TEFC (totally enclosed fan cooled) motor that supplies consistent power to the cutterhead that issused for both jointing and planing operations as well as the feed roller system in the planer mode. The belts and feed roller drive chain systems are contained within the cabinet but readily accessible through the large removable panel on the cabinet rear.

To protect the motor – and you – we include a magnetic On/Off switch with a built-in limiter. This switch prevents excessive variances in the electrical power from damaging the motor.

Another benefit of a magnetic switch is that should the power go out and then come back on the JET JJP-12 Jointer-Planer will not restart on its own. The On button must be pushed after power is restored to start the machine. The limit switch also prevents machine startup while changing modes of operation.

Capacities

To make the JET JJP-12 Jointer-Planer as capable as it is versatile, the jointing and planing width capacity is a full 12”. That capacity allows you to work with wider boards without having to rip them down to fit common jointer widths in the 6 to 8” range. Because both the jointer and planer width capacities are the same, you can move between those modes without having to add an additional ripping step to the process.

3-Knife Cutterhead

The JET JJP-12 Jointer-Planer uses a large 2 ¾”-diameter cutterhead fitted with three high quality knives for both jointing and planing operations. The cutterhead turns at 5500 RPM for all operations. The knives are retained with conventional wedge bars and have jacking screws that make setting their height precisely much easier. Because this cutterhead is used for both jointing and planing, setting the knives one time is all that is required.

Changing Modes

From the beginning, along with accuracy, capacity and durability, developing a fast, easy way to change between jointing and planing modes was high on the design criteria list. The JET JJP-12 Jointer-Planer sports a very simple, tool-free hinge based system that allows changing between jointing and planing modes very quickly without having to remove any components.

A pair of locking levers on the cabinet sides release the jointing bed which is then rotated up to expose the planer section. Lifting the cast iron jointer bed assembly (moves as one piece) is made easier because of spring-assisted hinges that reduce that effort substantially. A drop in lock at the hinge point secures the jointer bed in the upright position.

The dust collection shroud with its 4”-diameter outlet port is also hinged for use in both the jointing and planing modes. The shroud has an internal, gravity-operated baffle plate that helps direct the collection vacuum for maximum effectiveness. When the jointer bed is up, the dust shroud is rotated up into a very traditional location for planer dust evacuation. The planer section is now ready for use.

To go back to the jointer mode, rotate the dust shroud down, release the jointer table lock, lower the table into position and then engage the two locking levers. The JET JJP-12 Jointer-Planer is ready for jointing operations in seconds.

Jointer Mode

Because both the machine modes use the same 12” cutterhead, the jointer section is capable of face jointing 12”-wide stock. The 55”-long by 12”-wide cast iron infeed and outfeed tables provide plenty of support for the big project pieces.

The infeed and outfeed cast iron tables are individually adjustable for height for the most flexibility. The maximum cut depth is 1/8”. To insure long-term accuracy, we even included full coplanar adjustment capability and complete instructions in the manual for making this adjustment should it become necessary. The 43”-long by 6”-tall extruded aluminum smooth faced fence makes accurate jointing easy.

The fence is fully adjustable for material width using a pair of wide spread levers for maximum stability. The fence face can be set to any angle from 0 to 45-degrees for precise bevel cuts. A handy bevel scale and pointer are included on the fence mount.

Planer Mode

The JET JJP-12 Jointer-Planer is a fully capable thickness planer with a 12”-cut width and handles a whopping 8 ¾” maximum material thickness. The maximum full-width cut depth is 1/8” with 5/32” being the maximum cut on narrower stock. Naturally, lighter cuts put less stress on the wood itself and often produce much better results. The 5500 RPM cutterhead speed means a constant 20 FPM feed rate is a good balance between quick material removal and a clean, smooth surface.

In planer mode the material feed roller system is engaged by moving an exterior handle to the On position. That produces a material feed rate of 20 FPM. (feet per minute) The control lever is moved to the Off position when the JET JJP-12 Jointer-Planer is changed to the jointing mode.

The cutterhead assembly is fixed and includes a row of gravity-operated anti-kickback fingers for safety. A serrated metal feed roller is designed to resist contamination and maintain a consistent material feed rate for the best results. A rubber-covered outfeed roller keeps the stock moving without marring the freshly planed surface. The 21 ¼” by 12” planer table adjusts up and down through a large handwheel (with spinner handle) on the infeed end of the JET JJP-12 Jointer-Planer while in planer mode.

A scale on the handwheel hub shows the amount of change partial turns create while a full height scale with pointer shows overall cutter to table distance. The planer table is locked with a lever-type handle.

The JET JJP-12 Jointer-Planer was designed to bring the much needed jointing and planing capabilities to your shop in a single, space-saving 55”-long by 39 ½”-tall (top of fence) and 32”-deep (fence at its widest setting) package. Because of its space saving design and our focus on accuracy, function and durability, the JET JJP-12 Jointer-Planer is as economical as it is versatile.

Product description

JET JJP-10BTOS 10" Jointer/Planer with Stand (707410)

Featuring a compact benchtop design that makes it ideal for smaller shops or job sites with limited space, the Jet JJP-10BTOS 10-Inch Jointer/ Planer is lightweight and powerful. With innovative features typically found only on big floor models, this handy tool offers a precision-ground tabletop for a smooth, straight cut every time, precision adjustment knobs, a telescoping blade guard, and a large dust port.

Two-in-One Design to Maximize Space

The JJP-10BTOS's space-saving design doesn't skimp on efficiency. In fact, because it combines a benchtop jointer and a planer in one unit, you get a two-in-one machine to maximize work space. For added peace of mind, the planing and jointing tables both lock to guarantee precise cutting.

Fast Speeds and Various Cutting Depths for Versatility

With cutting speeds of up to 18,000 cuts per minute, and a maximum cutting width up to 10 inches, the JJP-10BTOS is versatile enough to tackle woodworking jobs both big and small. It also provides a jointer maximum cut depth of 1/8 inch and planer maximum cut depth up to .08 inch.

For additional versatility, a rigid steel stand allows the unit to easily transition from a benchtop to a standing configuration.

Powerful 13 Amp Motor and Two High-Speed Knives

A heavy duty, 13 Amp motor provides robust performance for a variety of cutting applications, while two high-speed steel knives make precise, smooth cuts.

Sheet Metal Outfeed Table Tackles Long Work Pieces

Versatile enough to handle a range of material sizes, the JJP-10BTOS includes a sheet metal outfeed table with height adjustment that supports even long work pieces. Its clever design also reduces snipe for consistent results.

Stable and Accurate Jointing and Planing

While you work, the tool's strong, accurate aluminum extruded fence can be angled up to 45 degrees, making jointing stable and accurate. Additionally, the planer includes a scale and pointer that indicate the distance between the planer table and cutter head. Finally, an integrated cord wrap makes for easy portability and prevents accidents or errors caused by dangling plugs and wires.

Oversized Ergonomic Knobs

For safe, secure operation, the JJP-10BTOS gives you easy access to the controls you need while working. In fact, the oversized, ergonomic knobs are extremely user friendly, helping you avoid errors caused by a slippery grip and preventing you from wasting time hunting for hard-to-see buttons or switches. Instead, these easy-to-see, stable knobs provide you with maximum control at every stage in your job.

The JJP-10BTOS is backed by a three-year warranty.

About JET: A History of Sharing New, Feature-Rich Products

Opened in 1958 after the founder of the company, Leslie P. Sussman, took the first Boeing Jet Airplane trip from Seattle, Washington to Japan, JET began as a small dealer that sold air hoists and trolleys out of a single hardware store in Seattle. Over the years, JET has carried everything from snowmobiles, transmitter radios, and forklifts to nylon stockings, but by the early 1970s, metalworking had become the base of their business line. And by the 1980s, JET had expanded into the realm of woodworking. Today, you'll find that JET offers a wide range of popular woodworking tools that are backed with best-in-class features and excellent service.

What's in the Box

Jet JJP-10BTOS 10-Inch Jointer/ Planer with stand

From the Manufacturer

Looking for a powerful jointer and planer for the shop or jobsite? Look no further than the new Jet 10-inch bench top jointer/planer. This powerhouse gives you the 1-2 punch of features usually only found on much bigger, more expensive machines. Precision adjustment knobs, a telescoping blade guard and a large dust port are only a few of the features that make this jointer/planer a must-have for your shop

• COMPACT: Combination benchtop jointer and planer provides a 2-in-1 machine to maximize work space.
• PRECISION: Large aluminum-extruded fence makes joining stable and precise.
• POWERFUL: Heavy-duty 13-amp motor for various cutting applications.
• PORTABLE: Integrated cord wrap makes transporting easy and ensures workshop safety.
• COMFORTABLE: Oversized, ergonomic knobs provide ease of use and maximum control.

User questions & answers

Question:	Does anyone make a helix cutting head that will fit this machine
Answer:	No the designs are not compatible, unless someone changes the entire blade mechanism, if possible at all. When I thought of it I let it go because it was not worth the effort.
Question:	Just to 120v or 220v is possible
Answer:	This unit is meant for 120 volt only.
Question:	Does this run on household current
Answer:	Yes, This machine runs on regular 110v household current.
Question:	Where do i find knives for this machine no one makes 10" knives
Answer:	Amazon has them.

Product features

Chipotle Carne Asada Tacos

Flank or skirt steak for carne asada tacos is traditionally marinated in lots of orange juice to tenderize and flavor the meat. For this air-fried version, however, I swapped in the non-wet versions of its flavorings so the steak can cook up in the air fryer with a crisp, flavorful exterior. Chipotle chile powder is available online, if not in your local grocery, and pairs beautifully with fresh orange zest in this spice rub. Once cooked, thinly slice the steak and serve up authentic-ish carne asada tacos at home without the need for a grill.

In a small bowl, stir together the chili powder, chipotle powder, salt, garlic powder, and orange zest. Working on a plate, rub the spice mix all over the steak, then drizzle it with the oil, turning the steak so the oil coats it evenly. Place the steak in the air fryer and cook at 400°F until browned on the outside and medium-rare inside, about 10 minutes.

Transfer the steak to a cutting board and let stand for at least 10 minutes. Thinly slice the steak across the grain and serve in warm tortillas, topped with avocado, onion, cilantro, and your favorite salsa.

Product description

13", heavy duty, portable 2 speed thickness planer.

The DEWALT DW735 features a three-knife cutterhead and a powerful 15 amp motor that delivers 10,000 rpm. It offers quick, accurate depth adjustment and the convenience of knives that are both reversible and disposable. This fully featured portable planer makes it easy to create clean custom stock.

Powerful 15 Amp Motor for Clean Cuts

Benchtop planers are a long-term investment that allow you to save money over time by buying rough stock and dimensioning it yourself. They also make creating custom materials easier, which, in turn, makes getting great results easier.

The DW735 13-Inch Planer's powerful 15 amp motor can handle deep cuts in tough hardwoods. Its three-knife cutterhead and two-speed gearbox deliver 96 or 179 cuts per inch (cpi). Use 96 cpi when dimensioning material and 179 cpi for a finer finish.

Reversible, Disposable Knives for Convenience

The DEWALT DW734 uses razor sharp knives that are reversible and disposable. These knives last 30 percent longer than traditional disposable knives, helping you avoid costly and time-consuming resharpening.

For fast, easy, one-tool knife changes, a set of pins machined on the cutter-head goes through holes machined on the knife. This helps you quickly locate the fresh knife and refasten the knife clamp.

Large Capacity and Easy, Accurate Depth Adjustment

This planer's extra-long infeed and outfeed tables provide 33-1/2 inches of material support. A turret depth stop saves you time when setting the machine at commonly used depths.

In addition, the planer's material-removal gauge and extra-large thickness scale help ensure every pass is accurate. A four-column carriage lock drastically reduces the movement that causes material damage, or snipe, when planning near the end of a board.

This sturdy planer weighs 80 pounds. It offers a maximum cut depth of 1/8 inch, a depth capacity of 6 inches, and a width capacity of 12-1/2 inches.

Fan-Assisted Chip Ejection for Dust Management

The DW735 features a Fan-Assisted Chip Ejection System with a motorized fan that breaks down debris as it leaves the cutterhead and blows it into one of the two dust shrouds (included). One shroud disperses the chips down onto the shop floor while the other provides a connection for a vacuum hose or dust-collector hose.

This sturdy planer weighs 92 pounds. It offers a maximum cut depth of 1/8 inch, a depth capacity of 6 inches, and a width capacity of 13 inches.

The DW735 13-Inch Thickness Two-Speed Planer with Three-Knife Cutterhead also comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box

DW735 DEWALT 13-Inch Thickness Two-Speed Planer with Three-Knife Cutterhead, dust-hose adapter, and dust-ejection chute.

From the Manufacturer

The DW735 13-inch thickness planer from DeWalt provides best in class surface finish through a one of a kind three knife cutter-head--even in hard to plane figured woods. At 96 or 179 cuts per inch, the DW735 offers the finist finish via the most cuts per inch available on a benchtop thickness planer. A fan-assisted chip ejection system aids in the removal of debris and prevents excess chips from marring your material. The unique automatic carriage lock minimizes the movement that causes snipe without engaging a lever before and after each pass. A solid 19-3/4-inch cast aluminum base provides twice the rigidity of traditional material support systems that utilize folding tables. The DW735 is a must for the serious woodworker.

FEATURES

• Powerful 15.0 Amp, 10,000 rpm motor handles larger cuts in wider materials with ease
• Three knife cutter-head delivers 30% longer knife life and makes knife change faster and easier
• Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
• Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine
• 19-3/4-inch cast aluminum base is 2X more rigid than a standard 10-inch base and folding tables
• Automatic carriage lock reduces the movement that causes snipe without the need for manual engagement by the user
• Material removal gauge and extra-large thickness scale deliver accurate cuts with every pass
• Extra-large turret depth stop allows users to return to most frequently used thicknesses with ease

SPECIFICATIONS

• Amps: 15.0
• No Load Speed: 10,000 rpm
• Max. Depth of Cut: 1/8-inch
• Depth Capacity: 6-inch
• Width Capacity: 13-inch
• Tool Weight: 92 pounds
• Shipping Weight: 100 pounds

• Powerful 15-AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease
• Three knife cutter-head delivers 30-percent longer knife life and makes knife change faster and easier
• Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
• Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine

User questions & answers

Question:	What is the table thickness (or height from the bottom to the table top
Answer:	from the bottom of the planer stand to the top of the planer intake is 2 1/2 inches. Our planer is also mounted on a plate to the stand so that adds additional height too. The table is 2 inches thick at the intake.
Question:	hello I wonder if they are including taxes and shipping to Mexico are included
Answer:	Currently we do not ship to Mexico.
Question:	What is snipe
Answer:	A snipe occurs within the first 2" on the infeed and outfeed of the wood. The blade may cut deeper when a snipe occurs.
Question:	Is this made in the USA
Answer:	Dewalt features a large “made in the USA” or “assembled in the USA” branding on most of not all their products that are manufactured or assembled stateside.

Product description

Remember when you needed to smooth out those joists? Plane away chips, splinters and misshapen edges with the WEN 6 Amp 3-1/4 Inch Electric Hand Planer. Perfect for fixing stubborn doors and fitting wood. This power planer’s 6-Amp motor delivers over 34,000 cuts per minute to your workpiece, slicing away any irregularities until the surface of your boards are aligned and smooth. With a cutting width of 3-1/4 inches and a maximum cutting depth of 1/8 inch, you’ll have the perfect companion for fitting and squaring boards. The 16 positive stops increase in increments of 1/128 inch anywhere from 0 all the way up to 1/8 inches. The base plate shoe even includes a v-shaped groove for easily flattening sharp post corners. Aside from the power planer, this package also includes a dust bag, a rabbeting guide, a kickstand and a parallel fence bracket. The included rabbeting guide adjusts anywhere from 0 to 7/10 inches to allow for rabbets up to an inch deep in size. The parallel fence provides an accurate and straight cut by making sure your strokes are directly parallel to the edge of the wood (a must have for planing door edges, wood trim and boards). The kickstand protects both the blade and the workpiece in between uses by keeping the blade elevated and out of contact from the surface of your project. Finally, the dust bag collects all of your loose shavings to keep your work space clean and sawdust free. The bag attaches to both the left or right hand side of the planer to fit whatever your preference may be. And because this is a WEN Product, your 6 Amp 3-1/4 Inch Electric Hand Planer comes backed by a 2-year warranty, a friendly customer help line, and a nationwide network of skilled service technicians. Remember when you had a reliable planer that lasted for years? Remember WEN.

• 6-amp motor provides up to 34,000 cuts per minute
• 16 positive stops adjust the cutting depth anywhere from 0 to 1/8 inches
• Make rabbets up to 7/10 inch in size with the included rabbeting guide
• Lightweight design weighs in at a mere 6 pounds. Motor:120 V, 60 Hz
• Includes power planer, dust bag, a kickstand, a parallel fence bracket and a 2-year warranty

User questions & answers

Question:	Will it plain rough flooring board. 400 sqf
Answer:	No - the table is cast steel and I cannot think of any way that it can be successfully extended. The jointer works well as it is.
Question:	Where can i get blades to fit the 6530 planer
Answer:	Maybe if you're not married.
Question:	Does this give a shave as smooth as a hand held planer? Trying to level off 5 different 2x6's together. Want to make sure this will do the trick
Answer:	Why is the Amazon price over $150 more than Lowes is selling for? Delta 6" jointer
Question:	I am beginning in wood working and I am curious, If I buy this one will I still need to buy other planers or will this one cover most of what I need
Answer:	I had the same problem. That darn handle is too long. I ended up cutting it down so it could turn without hitting the fence.

Product features

6 Amps of Dependable Planing Power

Remember when you needed to smooth out those joists? When you had to make those uneven boards flush? Plane away chips, splinters and misshapen edges with the WEN 6 Amp 3-1/4 inches Electric Hand Planer. Perfect for fixing stubborn doors or fitting wood. This power planer’s 6-amp motor delivers over 34,000 cuts per minute to your workpiece, slicing away any irregularities until the surface of your boards are aligned and smooth. With a cutting width of 3-1/4 inches and a maximum cutting depth of 1/8 inch, you’ll have the perfect companion for fitting and squaring boards. The 16 positive stops increase in increments of 1/128 inch anywhere from 0 all the way up to 1/8 inches. The base plate shoe even includes a v-shaped groove for chamfering to easily flatten sharp board corners. Remember when you had a reliable planer that lasted for years? Remember WEN.

Variety of Cutting Depths

16 positive stops increase in increments of 1/128 inch anywhere from 0 all the way up to 1/8 of an inch.

Kickstand for Added Protection

Kickstand prevents any unintentional blade-to-workpiece contact during times of rest.

Reversible Dust Chute

With the simple flick of the switch, change the directional aim of the sawdust from left to right. Dust bag attaches to either side of the planer.

34,000 Cuts Per Minute

The blade drum with two double-sided blades rotate at 17,000 RPM to ensure a clean and smooth cut. Blades are reversible and easy-to-replace.

Product description

10 Amp Benchtop jointer features a variable speed range of 6, 000 to 11, 000 RPM and Cutter head speed of 12, 000 to 22, 000 cuts per minute, allowing selection correct speed for material's size and hardness. Two-knife Cutter head, with Jackscrew knife leveling arrangement and built-in cutter head lock, allows for easy knife replacement and adjustment. Jointer is ideal for edging, flattening, or face jointing.

• 10 amp benchtop Jointer features a variable speed range of 6, 000 to 11, 000 RPM and cutter head speed of 12, 000 to 22, 000 cuts per minute, allowing selection correct speed for material's size and hardness. Two-knife cutter head, with jackscrew knife leveling arrangement and built-in cutter head lock, allows for easy knife replacement and adjustment. Jointer is ideal for edging, flattening, or face jointing.
• Variable speed: range of 6, 000 to 11, 000 RPM allows the user to select the right speed for the size and hardness of material
• Easy replacement and knife adjustments: two-knife cutter head with jackscrew knife leveling arrangement allows for easy replacement and adjustment of knives
• Accurate cutting: center-mounted fence gives needed support throughout the cut for accurate edge jointing
• Hard and soft surfaces: heavy duty 10 amp motor provides power for hard and soft woods

User questions & answers

Question:	What are the dimensions of the Jointer itself, not the package dimensions
Answer:	The saw can easily cut the full width of a 12" board when making a 90 degree straight or bevel cut. Angle cuts will reduce the maximum span of the cut.
Question:	How long is it from end to end of the in- and out-feed tables
Answer:	No.but I am surprised at the quality for the price.
Question:	how much does it weigh
Answer:	Maximum speed (rpm) 5000 RPM Arbor size 5/8 in. According to the tech specs in the description
Question:	how wide is the cut
Answer:	In theory it should be able to cut boards up to 12" wide, however the quality was so poor, it was literally falling apart out of the box and I never powered it up and returned it out of safety concerns.

Product features

Great for Woodworking

Making wood surfaces perfectly flat, the CRAFTSMAN CMEW020 10 Amp Benchtop Jointer is extremely versatile. From beginners to woodwork hobbyists, owning a good quality jointer is something that is crucial for your DIY projects around home. Do even more than just the general woodwork with this jointer at your workshop.

Flatten and Square the Face of the Board

The CRAFTSMAN CMEW020 10 Amp Benchtop Jointer holds a heavy duty 10 amp motor provides power for hard and soft woods. With DIY fences, table legs, chairs, frames and much more, you will be able to decorate your home with original masterpieces made by you.

Be in Complete Control

You will not have the hassle of losing control over this power tool as you will be able to adjust the speed range. Ideal for edging, flattening, or face jointing the CRAFTSMAN CMEW020 10 Amp Benchtop Jointer is also portable.

Product description

The Makita 18V LXT Lithium-Ion Cordless Planer (model XPK01Z, tool only) combines the speed and capacity of a corded planer with the convenience of cordless. The result is fast and accurate stock removal, without the cord. It's part of Makita's expanding 18V Lithium-Ion series, the world's largest cordless tool line-up powered by an 18V Lithium-Ion slide-style battery. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

• Planes Up to 3-1/4" Wide and 5/64" Deep in a Single Pass
• 2-blade cutter head with double edge carbide blades for added performance and smooth finish
• High power-to-weight ratio; weighs only 7.4 lbs.
• 14,000 RPM motor engineered for fast stock removal
• Click depth adjustment knob with easy-to-read scale with settings from 0" to 5/64" for precise depth adjustment

User questions & answers

Question:	Can you flatten a rough tabletop with this? Coffee table? Or just single boards. Thanks
Answer:	Hi there! Sure, you can mix our K2D3 Drops into any liquid if you do not want to take it sublingually. We aren't sure how it would taste in a hot beverage because it may not mix very nicely, but it works well in water or juice in terms of mixability and taste. Give it a go and let us know!
Question:	Is an edge guidr included on ghe cordless. If not, can i order one
Answer:	I never heard of it. Please enlighten me. I was shooting in the dark when I chose this Vegan source of D3. The sunflower oil base doesn’t taste that great.
Question:	Does this item come with an 18v battery
Answer:	The carrier of this supplement is olive oil and mct oil, however the entire bottle of 60 doses is only 2 oz. therefore it is very small per dose. Also from what I have read these vitamins are best absorbed with a bit of fat, so I think it is perfect, since I don't have to think about adding fat when taken. I am not a nutritionist nor do I know your dietary restrictions, everybody is different but personally I love this product!
Question:	When will Makita update this (and a few others) planer with a brushless motor? Many of their tools haven’t been refreshed in 4 years
Answer:	Pure Encapsulations - Vitamin D3 is not considered vegan. Vitamin D3 is derived from the cholesterol in lanolin, the fat found in wool.

Product features

Makita XPK01Z 18V LXT Lithium-Ion Cordless 3-1/4" Planer, Tool Only

The Makita 18V LXT Lithium-Ion Cordless Planer (model XPK01Z, tool only) combines the speed and capacity of a corded planer with the convenience of cordless. The result is fast and accurate stock removal, without the cord.

The XPK01Z delivers 14,000 RPM and is engineered for fast stock removal. It will plane up to 3-1/4” wide and 5/64” deep in a single pass, with a 2-blade cutter head and double-edge carbide blades for added performance and a smooth finish. The click depth adjustment knob has an easy-to-read scale with settings from 0” to 5/64” for precise depth adjustment. In addition, the precision machined aluminum base is engineered for increased planning accuracy.

Ease-of-Use Features

Comfort and ease-of-use features include a spring-loaded stand to elevate the base and protect the blades and work piece. Weighing only 7.4 pounds (with battery, sold separately), the XPK01Z has a high power-to-weight ratio and has an ergonomically-centered balanced design, with rubberized soft grip on the front and rear handles for increased comfort on the job.

The blade setting system is engineered for fast blade installation, with an electric brake for maximum productivity.

The XPK01Z is engineered for door and window installers, finish carpenters, deck installers, remodelers, and general contractors seeking a best-in-class cordless planer.

LXT and Star Protection Computer Controls

It’s part of Makita’s expanding 18V Lithium-Ion series, the cordless tool line-up powered by an 18V Lithium-Ion slide-style battery. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.

Product description

Remember when you brought those old jagged boards back to life. The WEN 13 in. 3-Blade Benchtop Thickness Planer repurposes rough and worn wood to give it an exceptionally smooth finish. The powerful 15 Amp motor provides over 25,500 cuts per minute at a 26 ft. per minute feed rate. Plane boards up to 13 in. W and 6 in. T with ease. The onboard planning gage helps inform users about the amount of material being removed during each pass. Combine that with the heavy-duty cast iron base for a sturdy planer that does not walk or wobble during operation. The handy depth adjustment knob varies each pass to take off anywhere from 0 in. to 3/32 in. of an inch. The fan-assisted dust port removes chips and sawdust from the workpiece and blasts them out of the way. This package also includes height-adjustable infeed and outfeed tables to limit snipe while providing extra support to your workpiece during planning. Easily mount the planer to a work surface or stand using the predrilled base holes. Repurpose old wood or make a set of boards flush with the WEN 13 in. 3-Blade Benchtop Thickness Planer. And because its a WEN product, this planer comes backed by a nationwide network of skilled service technicians, a helpful customer support line and a two-year warranty. Remember when your planer could handle even the hardest of woods. Remember WEN.

• Onboard material removal gauge informs users about the cutting depth of each pass
• Plane boards up to 6 in. T and 13 in. W
• 15 Amp motor generates 25,500 cuts per minute at a 26 ft. per minute feed rate
• 3-blade design makes easy work out of even the hardest of woods
• Fan-assisted dust port removes sawdust from workpiece

User questions & answers

Question:	how much tax money we have to pay ? @ how much money the shipping will cost
Answer:	if you have amazon prime shipping is usually free on items like this. i think you pay tax at the rate of where its coming from but you need to do further checking on that.
Question:	How thin can I plane a piece of wood down to with this planer
Answer:	Down to 1/8” is possible. Working down in very shallow increments. A little less than 1/8” if you run the wood through planer attached to an auxiliary scrap piece of wood. A piece of plywood maybe .
Question:	What is the size of infeed/outfeed table
Answer:	Table Size 13-1/4 in. x 9-1/2 in. https://m.media-amazon.com/images/I/C17Wys9ylFS.pdf
Question:	Does this planer have a standard 110 plug
Answer:	YES, it is a standard 3-prong 110 plug.

Product features

Tri-Roller Feeding System & Reversible Blades

The WEN Thickness Planer uses a tri-roller feeding system to help minimize snipe. The three dual-edged blades on the middle roller can be reversed to help elongate their life cycle and ensure sharp cuts.

Fine-Tune Depth Adjustments

Easily adjust the height of your planer with the comfortable rubber-grip adjustment handle. Each quarter rotation adjusts the height of the cutter head 1/64 of an inch for maximum precision during operation.

Infeed and Outfeed Tables

Foldable infeed and outfeed tables add support to longer workpieces traveling through the planer. Both tables can be adjusted to get the perfect angle for smoothly feeding boards for smoothly feeding boards and fighting snipe.

Dust Hose Connection Port

Attach a dust extraction device or a wet/dry vac to the handy 2 inch, 2-1/2 inch, or 4 inch fan-assisted dust port adapter to minimize cleanup. Keep all of the sawdust and shavings in one place instead of all over the workshop floor.

Product description

Remember when you had a perfectly square jointer to flatten out your boards and workpieces? Maximize precision with the WEN 6-Inch Benchtop Jointer. Our powerful 10-amp motor combined with the two-blade 6-1/8 inch cutterhead provides up to 20,000 cuts per minute, making easy work out of even the hardest of woods. Adjust the infeed table to take cuts anywhere from 0 to 1/8 inches deep. The onboard scale makes for easy adjustments to the depth of cut for maximum accuracy before each pass. The spacious table measures in at 6-1/4 x 28-1/2 inches for large or uniquely-shaped workpieces. Bevel the fence up to 45 degrees to create angled cuts along the faces of your boards. The spring-loaded blade guard helps protect against accidental injury, exposing the cutterhead only during jointing operation. This package also features an onboard dust port, a push stick, a push block, and a filter bag for minimal cleanup. And, because its a WEN product, the WEN 6-Inch Benchtop Jointer comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN.

• Features a spacious 6-1/4 x 28-1/2 inch table and a two-blade 6-1/8 inch cutterhead
• 10-amp motor provides up to 20,000 cuts per minute anywhere from 0 to 1/8 of an inch in size
• Onboard depth scale makes for easy adjustments to the depth of cut
• Adjustable 20-3/4 x 4-1/2 inch fence bevels up to 45 degrees in either direction
• Includes a push stick, a push block, an adjustable 2-1/2-inch dust chute, a dust filter bag, and a two-year warranty

User questions & answers

Question:	Two questions, [1. Is it easy to change blades? [2. Can the blades be purchased via Amazon
Answer:	These are 1/2 inch shank
Question:	Does it come in 230 v version
Answer:	Yes, it comes with a micro usb to ac adapter and charger, thank you!
Question:	Can it be used to plane wood as well as joint
Answer:	If you have WiFi!
Question:	Description says "Onboard depth scale" but I cant't see it in any of the images. I can see the knob to adjust the depth but where is the scale
Answer:	It comes with the charger.

Product description

6" Benchtop Jointer #20-600H has a 6 row helical-style cutter head with 12 HSS, 2-edge insert cutters for super cutting action, flat surfacing results and easy knife changes. Features rigid, all-metal construction, machined aluminum tables, a quick depth setting mechanism with scale, adjustable fence that tilts from 90° to 45° quickly and accurately, spring-loaded safety guard, 2-1/2" dust port, front safety on/off switch and two push blocks.

• RIKON BENCHTOP JOINTER - This 6” becnhtop jointer has a 6 row helical-style cutter head with 12 HSS, 2-insert cutters for super cutting action.
• HIGH SPEED - With a powerful 10 AMP motor, this benchtop jointer also features a high speed steel insert knives and a large 30” x6-3/16” table.
• ALL STEEL CONSTRUCTION - Made from rigid, all-metal construction, machined aluminum tables, a quick depth setting mechanism with scale, adjustable fence that tilts from 90 degrees to 45 degrees quickly and accurately.
• SEE RESULTS - This benchtop jointer also has a spring loaded safety guard and a front on/off switch. You will see results when using this benchtop jointer.

Product description

Precise, Durable, Adjustable Power Tool for Every Woodworker

Experience smooth, cutting precision that makes prep work even more convenient with Wahuda Tools Jointers. Flatten edges and create two perfectly square surfaces with ease using a stable and powerful benchtop jointer that comes in 6, 8, and 10-inch size options, all of which are designed to be easily maneuvered around your shop or job site. Wahuda Jointers comes equipped with a cast iron table for maximum stability during operation while ensuring a more scratch-free working surface. Adjusting your work area is uniquely simple, too, thanks to pre-installed set screws that make leveling hassle-free.

Built To Smooth All Types of Wood Surfaces

Unlike the traditional straight knives, our new Spiral Style Cutterhead enhances cutting-edge sharpness while reducing the need for blade maintenance. With four sides of carbide insert tips, get smoother cuts and smaller shavings from blades that stay sharp for longer. They’re also incredibly easy to replace. Simply loosen the insert, rotate to the next edge, and tighten the insert back into place. The spiral design also cuts quieter while minimizing disruption from nicks and tear-outs.

Designed For Beginners To Expert Woodworkers

Whether you are a budget-minded novice or an experienced woodworker, Wahuda Jointers are created to help you perfectly prepare your stock for the next step. With ample machining power to handle various woodworking tasks, such as squaring, tapering, and trimming, you can complete your projects with ease and efficiency. Make Wahuda Tools your woodworking partner and craft your next masterpiece.

• No More Cupped Woods. Create perfectly flat surfaces and edges quickly and hassle-free with the Wahuda Jointers. Experience smoother and accurate cuts even on tough or figured woods w/ Wahuda Tools.
• Cutting-Edge Sharpness. Our spiral cutterhead has 4-sided carbide inserts for sharper and quieter cutting precision. The standard blade size also allows for a cost-effective and simple replacement.
• Capable Steady Performance. Wahuda Jointers are powered with a 120V motor with a fixed 12,000 RPM. They are fully capable of handling edging, jointing, flattening, or tapering no matter the surface!
• Solid Built For Your Convenience. Our adjustable and expandable cast iron tables enhance stability even when working on longer, larger pieces, with a fence that tilts from 90 &135​° for ​versatility.
• Perfect For Job Sites Or Small Shops. Depending on your needs or your shop’s size, Wahuda Tools have 6, 8, and 10-inch wood jointers that will do the job right. They’re conveniently movable, too!

User questions & answers

Question:	are the blades (carbide tips square to the table or are they angled so they shear the wood rather than cut in a cupping action
Answer:	There are 12 included bits inside the screwdriver cartridge that you can swap between. You can also fit any bit of your choosing into the 1/4 in chuck. Thanks for the question!
Question:	Wahuda website says the 6” jointer is 30.5” overall length. Amazon says it is 34”, and a question here says 33 7/8”. Which is it
Answer:	No, on a couple of levels: This device is powered by an internal rechargeable battery. On the bottom of the grip, there is a micro-sub port, similar to what you would see on your average Android cell phone or many blue-tooth headsets. You charge the screwdriver through this sub port. The voltage for us ports is 5 volts. The product ships with a ac-to-usb adapter. That adapter only accepts 110-120volts You can buy international travel power adapters that will accept 220volts and provide usb charging
Question:	Where is it manufactured
Answer:	Not sure, but this one sucked
Question:	Why is this jointer $50 cheaper on their website? It’s $549 with free shipping to the lower
Answer:	Just snug it up with the impact and be sure to use the lowest setting, then use the torque wrench to complete the tightening process.

Product description

8” Benchtop Jointer 20-800H has a 6-row helical-style cutter head with 16 CARBIDE, 2-edge insert cutters for super cutting action, flat surfacing results, and easy knife changes. Table extensions expand the work surface from 30-1/2″ to 51-1/2″. Features rigid, all-metal construction, machined aluminum tables, a quick depth setting mechanism with scale, adjustable fence that tilts from 90° to 45° quickly and accurately, spring-loaded safety guard, 4″ & 2-1/2” dust ports, front safety on/off switch and two push blocks.

• Helical-style Cutter head with 16 two-sided carbide inserts
• Large 19-3/4″ x 4-3/8″ Fence tilts 90° to 135°
• Safety on/off switch and easy read depth scale
• Full table size 30-1/2″ x 8-3/16″ extends to 51-1/2″ x 8-3/16″
• Portable as it weighs only 49 lbs

User questions & answers

Question:	Will this fit on a 14"x25" tool stand
Answer:	If you're careful with your set up, yes.
Question:	can this joiner be anchored to prevent movement with large pieces running through it
Answer:	The owners manual for this planer depicts three on each side. You can review the complete manual via download from our website at this link http://www.cpojettools.com/jet-708528-jwp-208-1--20-in--woodworking-planer/jetn708528,default,pd.html.