14 best black decker 12 volt battery chargers

Product description

This Black and Decker Battery Maintainer and Trickle Charger will work with both 6-volt and 12-volt batteries. It is ideal for battery maintenance, charging RVs, specialty vehicles, antique and classic cars, motorcycles, lawn mowers, tractors, ATVs, snowmobiles, personal watercraft and more. There are two LED indicators—a red one for fault and a green one to show charge status.

• Charges and maintains 12 volt and 6 volt AGM, GEL and WET batteries
• Easy connection to vehicle battery using battery clips and O-ring terminals
• Stops charging automatically when battery is fully charged or topped off, switching to float mode monitoring
• Built-in circuit protection guards against overcharging, reverse polarity, or short circuit; ETL certified for performance and safety
• Mounting bracket built-in to charger for convenient placement
• AC Low voltage compensation ensures maximum performance when used with an extension cord

User questions & answers

Question:	How long are the cords
Answer:	There are only two ways to Efficiently & properly charge the unit, plug it into a house 110 V outlet or Or I use a 4000 W inverter in my truck and I plug the inverter primary into the cigarette lighter and the secondary is 110 V which works great on that Max in addition to charging at the same time many charging tool batteries and led work lights. I leave it plugged in My trucks Invertor all the time while driving and all my tools including the max are always charged and hot ready to go.
Question:	Just want to make sure I understand this correctly - you can plug this into the cigarette lighter and don't need to connect to the battery
Answer:	I wouldn't count on this type of pack for anything with a motor (power tools, the blender, pumps, etc). I tried running a small fridge off a 400 watt inverter connected to a car battery and that wouldn't work. The fridge only needed ~120 watts running, but to start it's motor the "Surge draw" was ~1000 watts that would put the inverter in "overload" alarm every time. So despite the minimal time of running the blender, that "surge draw" is quite often too much for these small inverters.Also FYI, the batteries in these can give you ~200 watts of power for 1 hour (or 100 watts for 2 hours, etc). That's how long they'll last alone. I've seen in manuals that "You can extend the run time by connecting up another battery via the jumper cables", yet if you need multiple parts anyway I'd be tempted to look at a separate battery big enough for everything and a bigger inverter.One of the best suggestions I can make is get something like the "kill-a-watt" meter and see what power your blender & things need for how long. That meter costs $20, so before spending $100+ on this I think knowing what you really need (measuring the power demands) is worth it. That meter can show you both power draw while running (for inverter sizing) and KWH power use (for battery sizing).
Question:	how fast does it charge
Answer:	I don't have a CPAP or such, but have seen this question posted many times (look under the similar units like Schumacher XP2260 or Duracell 600 packs). This like those other packs has about an "18 amp-hour" battery hinting it can provide 1 amp (at 12V) for 18 hours, or 2 amps for 9 hours, or 3 amps for 6 hours, etc. Many others have said they can get at least 1 night out of the packs if you don't need to run things like a humidifier function or such that needs much more power. Since I don't have the same equipment you do to really know the power use (as well as what settings you need), one of the best ways to find out how long this would last is to get a meter like the "Kill-a-watt" and measure the power use yourself. That meter goes for under $20, so before spending $100+ on this I'd see that as worth it. Based on the info I gave above these packs can provide about 200 watts for 1 hour (or 0.2 KWH). With some of the labels like "400 watt inverter" or such you may think it lasts much longer (like at least 1 hour under that 400 watt load), but it doesn't, so don't expect too much out of it (and that's the same for all packs like this).
Question:	What is the float voltage? When the charger indicates it is done charging what is the voltage of the battery
Answer:	Yes, you can charge this with many "12V" solar panels that are out there. Just beware that if a solar panels is directly connected up, they can raise the battery voltage to levels over 15V which is considered "Overcharging". So it's best to have a voltage regulator or "Charge controller" between the panel and battery (which will stop charging once the battery is at 14.5V which is "full" for it).

Product description

Includes 90592360-01 Charger. New, Bulk Packed. Genuine OEM Replacement Part # 90592360-01. Consult owners manual for proper part number identification and proper installation. Compatible with the Following: Black and Decker: FS1200D-2,BDID1202,CD1200S,XD1200,MT1203B,FSD122,FS1202ID,FS1202D,MT1203BL.

• Genuine, OEM Black & Decker Replacement Part
• Black & Decker replacement chargers, part number 90592363

User questions & answers

Question:	Will this work with 220V power source
Answer:	Read what the input to the transformer is. If it says 110-220v, you should be ok. Pushing the limits, though.
Question:	What is the output on this charger
Answer:	The output marked on the charger is 9.6 to 18 volts. It charges my 14.4 v battery just fine and I have no need to actually measure it. So , I don't know the actual output.
Question:	What is the Ah output of this charger? It should say it right on the plug side
Answer:	No Ah on side. Took a picture to send but don't know how to attach. Do you have an email I can send it to? Ron
Question:	Is this a smart charger
Answer:	No just a stock regular charger.

Product description

Lasica Charger:

Lasica Multi-Volt Charger BDFC240 for Black and Decker 9.6 Volt Thru 24 Volt Slide Pack Batteries

The functions are the same as the original products.

Safe with rapid-charge technology while providing overcharge and overdischarge protection to increase the life of the battery.

Charges most 9.6-18V Black & Decker Slide Pack Batteries in Approximately 1 hour

Charges most 24V Black & Decker Slide Pack Batteries in Approximately 2 hours



Replacement for Black &Decker Charger Model

Replacement for Black & Decker Original Charger BDCCN24 BDFC240 FSMVC 90556254-01 90592360-01



Compatible with Black & Decker Slide Pack Battery Model

for Black & Decker 18 Volt NI-CD/NI-MH/Lithium Battery HPB18 HPB18-OPE FSB18 FS18BX FS18SBX FS180BX FS18C FS18FL 244760-00 HPB18-OPE2 HP188F A1718 A18 A18E

for Black & Decker 24 Volt NI-CD/NI-MH Battery HPB24 FSB24/5103040-11

for Black & Decker 14.4 Volt NI-CD/NI-MH Battery FSB14 HPB14 FS14BX FS140BX A14 A144 A144EX A14F

for Black & Decker 12 Volt NI-CD/NI-MH Battery HPB12 FS120BX FSB12 FS120B A1712 A12 A12EX

for Black Decker 9.6 Volt NI-CD/NI-MH Battery FSB96 HPB96 FSB96BX FSB96-2PK



for Black & Decker Power Tools Model

for Black & Decker 9.6 to 24 volt outdoor power tools BD18PSK, BDGL1800, BDGL18K-2, CD182K-2, CD18SFRK, CD18SK-2, CDC180AK, CDC180ASB, CDC18GK2, EPC18CABK, EPC18CAK, FS188F4, GCO18SFB, GLC2500, HP188F2B, HP188F3B, HP188F3K, HPD1800, HPD18K-2, HPG1800, HPG18K-2, NHT518, NPP2018, NPT3118, NS118, NST1810, NST2018, PS182KB, PS18K2, XTC183BK, XTC18BK, etc



Product Details:

Input Voltage: 100V-240V

Output Voltage: 9.6V-24V

Current: 2.3A

Battery Type: Ni-Cd & Ni-Mh (B&D 18V lithium battery HPB18)

AC Plug: American type flat pin (US Plug)



What's in the Box:

1 Pack * Lasica 9.6V-18V-24V Battery Charger BDFC240 for Black & Decker 18V 14.4V 12V 9.6V 24V NiCD&NiMH Battery

• 【Replacement for Black & Decker Charger】Lasica multi volt battery charger replacement for Black and Decker 18 Volt 14.4 Volt 12 Volt 9.6 Volt 24 Volt NiCad & NiMh battery charger 90592360-01, 90556254-01, FSMVC, BDCCN24, BDFC240. Work with Black & Decker 9.6 volt to 24 volt cordless drill tool battery.
• 【Perfect Compatible】Compatible with Black and Decker 18v 14.4v 12v 9.6v 24v slide-style battery HPB18 HPB18-OPE HPB14 HPB24 HPB12 HPB96 244760-00 firestorm FSB18 FSB24 FSB14 FS12B.
• 【Fast Charger】United States standard plug 100V to 240V voltage input, DC outout 2.3A. Charges BLACK & DECKER 9.6V to 24V NiCD & NiMH batteries in under 1 hour (Also charges Black and Decker 18V lithium battery HPB18).
• 【Intelligent Protection System】Unique all-round cooling system design, Internal cooling system circulates air across batteries to reduce hot/cold pack delays. Diagnostics with LED indicator communicates battery charge status. Optimizes battery life by actively controlling current, voltage & temperature.
• 【Safe & Reliable】BDFC240 Battery Charger, 60 Days Money Back, 12 Months Warranty. Comply with FCC RoHS and CE security testing standards. If you have any questions, please feel free to contact us, our team will do all we can so every customer buying our product will be satisfied.

Product features

Compatible with Black and Decker Charger ITEM

• Replacement for Black & Decker Charger Model:
• for Black & Decker Original Charger BDCCN24 BDFC240 FSMVC 90556254-01 90592360-01

• Compatible with Black & Decker Slide Pack Battery Model:
• for Black & Decker 18 Volt NI-CD/NI-MH/Lithium Battery HPB18 HPB18-OPE FSB18 FS18BX FS18SBX FS180BX FS18C FS18FL 244760-00 HPB18-OPE2 HP188F A1718 A18 A18E
• for Black & Decker 24 Volt NI-CD/NI-MH Battery HPB24 FSB24/5103040-11
• for Black & Decker 14.4 Volt NI-CD/NI-MH Battery FSB14 HPB14 FS14BX FS140BX A14 A144 A144EX A14F
• for Black & Decker 12 Volt NI-CD/NI-MH Battery HPB12 FS120BX FSB12 FS120B A1712 A12 A12EX
• for Black & Decker 9.6 Volt NI-CD/NI-MH Battery FSB96 HPB96 FSB96BX FSB96-2PK

Compatible with Black & Decker Power Tools Model

• for Black & Decker 9.6 to 24 volt outdoor power tools
• BD18PSK, BDGL1800, BDGL18K-2, CD182K-2, CD18SFRK, CD18SK-2, CDC180AK, CDC180ASB, CDC18GK2, EPC18CABK, EPC18CAK, FS188F4, GCO18SFB, GLC2500, HP188F2B, HP188F3B, HP188F3K, HPD1800, HPD18K-2, HPG1800, HPG18K-2, NHT518, NPP2018, NPT3118, NS118, NST1810, NST2018, PS182KB, PS18K2, XTC183BK, XTC18BK A9262, A9267, A9276, A9527, B-8236, BPT1058, A1714, 499936-34, 499936-35, A9252, A9275, etc

Intelligent Protection System

• Unique all-round cooling system design, Internal cooling system circulates air across batteries to reduce hot/cold pack delays.

Charger Indicator Lights

• Stand By: Red light flash once

• Fully Charged: Green light solid

• Temperature Anomaly: Green light flashing

• Battery Charging: Red light solid

• Battery Defective: Red Light flashing

Easy-to-read LED status indicator lights

• 1. The easy-to-read LED status indicator lights let you know when your battery is fully charged, and the device will automatically enter sleep mode once the charge is complete.
• 2. This not only saves on energy costs and avoids over-charging, but it also preserves the lifespan of your battery.
• 3. This charger works with Black & Decker power tool battery, so you can feel confident about your purchase.

How to Maintain the BDFC240 Multi-Volt Charger

• 1. If you don't plan on using the Black & Decker charger for a month or more, store it in a clean, dry, cool place away from heat.

• 2. Please don't stay battery on the charger during storage.

Product description

Note: The charger only fits for Black and Decker 12V Lithium Ion Battery. (Only one charger.)



Specifications of Black and Decker 12V Li-ion Charger:

Input Voltage: AC100 - 240V

Output Voltage: 12 Volt / 1 A

The Charger for Black and Decker 12V Lithium Battery



Fit for:

Black and Decker BL1110 BL1310 BL1510 LB12 LBX12 LBXR12



LED Indication Light:

Red: charging is running

Green: charging completed, battery full

Red light flashes: Battery faulty



Package Includes:

1 piece Charger for Black and Decker 12V Lithium Battery



Caution:

● Indoor use only.

● This battery charger only suitable for Black and Decker 12V Lithium Battery.

● Please make sure charger connectors are matching the battery before using.

• Charger for Black and Decker 12V Lithium Ion Battery. Input Voltage: AC100 - 240V Output Voltage: 12 Volt / 1 A
• Replacement charger for Black and Decker 12V li-ion battery power tools BL1110, BL1310, BL1510, LB12, LBX12, LBXR12.
• Excellent charging function and short circuit protection. Time for a fully charged: 1.5 - 3 hours.
• High quality charger protect the battery and extending battery lifetime, the LED indicator shows battery charging status.
• 12 months warranty and 30 days money back guarantee. 7*24 hours friendly and timely after-sales service support.

• 【Battery Specification】Professional replace for Black and Decker 12v battery | Battery Type: Ni-Mh | Voltage:12V | Capacity: 3600mAh | Condition: Brand New | 2 Pack Battery with Charger in package
• 【Charger Features】Input: AC100V-230V | Output: DC9.6V-18V | Model Number: 90556254-01 | 100% Compatible with Original Black and Decker Manufacturer Equipment
• 【Applicable Models】 Fully Compatible with HPB12 FS120BX FSB12 FS120B A1712 A12 A12EX, Powers up a range of B&D 12-volt power tools, Fit for BD12PSK, CD1200SK, SS12, CDC120ASB, BDID1202, BDG1200K, BDGL12K, BDBN1202 tools
• 【Replacement & Application】Replace for Black & Decker original charger 90556254-01.Compatible for All Black & Decker 9.6V 12V 14.4V 18V NiCad & NiMh Battery FS12B, HPB12, FS120BX, FSB14, HPB14, FSB18, FS18SBX/ 90501196, HPB18, HPB18-OPE, HPB96/FSB96/90534824
• 【Worry-free After Sales】We provide professional customer service. Any problems, please contact us by email and we will reply with help!

Product description

The BLACK+DECKER BC15BD battery charger and maintainer will get you back on the road in minutes when your vehicle won't start or if your battery needs maintenance. Just connect the battery charger clamps to the battery terminal and press charge. The bench battery charger automatically does the rest for optimum performance. Fully automatic high frequency charging delivers 3 stage charging, automatically switching from fast charge, to top-off, to trickle charge. This bench battery charger is ideal for motorhomes, boats, jet skis, lawn tractors, ATVs, snowmobiles, and vehicles that sit idle for months at a time. Charge and maintain any AGM, GEL, or WET automotive or marine 12 V battery. It's equipped with a digital LCD screen that displays charging status and battery status with easy to understand icons. It also features an alternator check to evaluate the battery voltage under load to indicate if the alternator is maintaining battery level. This battery charger eliminates the need to manually input settings like battery type and size, and charges up to 40 percent faster than other conventional chargers. The BLACK+DECKER BC15BD bench battery charger and maintainer also features a 40 amp engine start, which helps start your vehicle in about 90 seconds for when you need to get back on the road quickly. The built-in cord, cable wrap, and clamp storage make this battery charger easy to use and store. California Energy Commission (CEC) compliant and ETL Certified for performance and safety. Includes a limited 1 year manufacturer warranty.

• 15 amp bench battery charger maintains and charges any AGM, GEL, or WET automotive or marine 12V battery
• Fully automatic high frequency charging delivers 3 stage charging, automatically switching from fast charge, to top-off, to trickle charge
• Battery reconditioning feature helps extend battery life; 40 amp engine start helps start your vehicle in about 90 seconds
• Equipped with reverse polarity protection; LCD screen displays charging status and battery status with easy to understand icons
• Features a patented alternator check which indicates if the alternator is maintaining battery level; ETL Certified for performance and safety

User questions & answers

Question:	Will this work on a dead duralast gold battery
Answer:	Right angle plug, but no issues connecting to any radio so far.
Question:	Is it portable or it have to be plug in all the time
Answer:	This is an 8 ohm speaker, not 4 ohm so if your application needs a 4 ohm speaker (most car sound systems are 4 ohm) and you use this one, it will not be as loud as it should be. I used this speaker for a Motorola 2 way radio in one of our fire trucks that had a bad internal speaker and so far it works AWESOME and is plenty loud and clear even at half volume.
Question:	Can you use it on two deep cycle batteries hooked in parallel
Answer:	I do not believe there is a warranty but I can tell you it is a great speaker. The speaker is used with my Yaesu FT 8800R and I would recomend it.
Question:	I recently purchased this battery charger but I received a Stanley brand. Did anyone actually receive what is pictured (Black & Decker
Answer:	no i t does not we can see were we are all over long island sound and Ct river in old saybrook ct.

Product features

Black & Decker BC15BD 15 Amp Bench Battery Charger with Engine Start Timer

Black & Decker knows how frustrating it can be to wake up to a dead battery, which is why they made the BC15BD, the only battery charger you will ever need. With it's patented 40A Engine Start Timer technology, the BC15BD can optimize the power of your battery in only 8 minutes, giving you enough power to start most cars, even when your battery is completely dead. The BC15BD also is completely automated with 3 built in charging options, switching between fast charge, top off, and trickle charge when needed to ensure that your battery is always being charged at the highest capacity and in the shortest amount of time possible.

One of the most advanced charger on the market

The BC15BD boasts many patented features unique to Black & Decker such as an alternator and battery voltage check gauge which is view able from a large LCD monitoring screen. The LCD screen displays information through easy to understand icons, monitors the electrical charge of your alternator and battery simultaneously, and even alerts if the battery clamps are connected to the incorrect terminals.

Completely worry free charging.

Because the BC15BD was created with you in mind, everything is completely automated for more ease of use. Many other chargers require that you set various settings such as battery type and size but with the BC15BD you can simply plug in the charger and walk away knowing that everything will be done correctly, and with the capability of charging 40% faster than most conventional chargers, you will be back on the road in no time.

Product description

Black & Decker

• Black & Decker FireStorm FS12C Charger for 12V NiCd Batteries

User questions & answers

Question:	WHY DOES IT FAIL
Answer:	It has worked with my Black & Decker with no problem. I had originally thought the drill itself had the motor go out but it was just the old charger.
Question:	Is it over charge protective
Answer:	I've not had a problem leaving one battery in the charget at all times. I haven't changed out batteries lately though.
Question:	How do you test for bad battery or bad charger? i was given a dead Fire Storm drill and am trying to isolate reason it doesn t work. Thx
Answer:	I don't really have an answer, except that in the last few years every manufacturer switched from Ni-Cad batteries to lithium-ion. That includes Black & Decker. If your battery is lithium-ion, that charger won't work.
Question:	Will this work, and fast, for an18V
Answer:	I don't know, but I doubt it. It's for 12V and it works fine for them.

Product description

The BLACK+DECKER BC6WBD 6 amp battery charger and maintainer lets you charge your batteries anywhere, whether outside in the elements or out on your boat, without having to worry about an accident. Charges 12 volt AGM, GEL and WET batteries in RVs, specialty vehicles, antique and classic cars, marine deep cycle batteries, motorcycles, lawn mowers, ATVs, snowmobiles, and personal watercrafts. Connect the battery charger and maintainer with the included 12V DC accessory plug, or battery clips. Charging automatically stops when battery is fully charged or topped off and switches to float mode monitoring to maintain charge. Built-in circuit protection guards against overcharging, reverse polarity, or short circuit and is ETL certified for performance and safety. Features an IPX7-rated waterproof housing, making this the ideal charger even in the most challenging environments; completely sealed and capable of withstanding direct water or rain exposure. The BLACK+DECKER BC6WBD 6 amp battery charger and maintainer also features a hanging hook and magnetic backing, allowing you to position the unit for convenient, hands-free operation; includes a limited 1 year manufacturer warranty.

• 6 amp battery charger and maintainer is compatible with any AGM, GEL, or WET automotive or marine 12V battery
• Fully automatic high frequency charging; AC low-voltage compensation ensures maximum performance when used with extension cords
• Features an IP67 rating which certifies a completely sealed, waterproof and dust proof housing capable of withstanding direct water or rain exposure.Cord Length:4.9 inch
• Built-in circuit protection guards against overcharging, reverse polarity, and short circuiting; ETL Certified for performance and safety
• Offers 2 ways to connect: 12V DC accessory plug or battery clamps; Hanging hook and magnetic backing allow for convenient, hands-free operation

User questions & answers

Question:	I have the 2 amp version. The manual says never operate it in tempatures other than 41 to 104 degrees (5c to 40c). Is this suppose to say -41 to
Answer:	I used mine in -10 degree weather and it seemed to work just fine...although I noted today it is no longer working. Today it is around 40 degrees out. Don't know if that shortened the life span or what.
Question:	necesito este producto en 220 volt
Answer:	We do produce a product for the European markets which works at 220v, the BC6BDWE.
Question:	Should this be hot to the touch? I'm charging a 12v 55 ah battery, and it's not just warm, but too hot too handle
Answer:	No, it should not be burning hot. Test it on a different battery and see if it is any cooler. If it always gets too hot, you may have a defective unit.
Question:	Can i leave the car on (engine not running) for an hour while i program the ecu with this plugged in to keep the battery from going dead
Answer:	I'm not a professional but I think it would be alright. It probably wouldn't charge the battery just keep it in a float state. I would check into whether or not it could interfere with your programming, though.

Product features

Black & Decker BC6BDW 6 Amp Waterproof Battery Charger and Maintainer

Black & Decker knows what a hassle a dead battery can be, which is why they created the fully waterproof BC6BDW battery charger/maintainer. This charger is fully automatic, removing all the guess work out of charging your batteries. The BC6BSW has the ability to identify the level of charge on any type of battery and maintain a level of maximum charge and with it's high frequency charging technology, you can simply plug in the BC6BSW and walk away confident that your battery will be fully charged and ready for use.

Waterproof charging

With Black & Decker's unique waterproof battery charger system, now you can charge batteries anywhere, including outside in the elements and even on your boat without worry of an accident. And because this is a high frequency battery maintainer, the charger can be left connected for any length of time, allowing you to continuously maintain a charge on all of your batteries, including lawn mowers, motorcycles, and personal watercraft.

Long lasting.

The BC6BSW is built to last, with a fully sealed outer case, protecting it from dust, oil, and moisture, to prevent corrosion or other damaging effects of weather exposure. Also includes a 1 year limited warranty.

Battery clamps

Battery clamps are ideal for use attaching charger to any type of battery terminals.

Easy charging

The battery clamps along with waterproof case work exceptionally well charging marine batteries.

In car charging

Excellent at charging car batteries while the battery is still in the car, rain or shine.

DC plug

If you prefer to charge / maintain your battery from inside your vehicle this is a great option. Simply use the DC plug with your vehicle’s accessory outlet. No touching your battery means your hands stay clean!

Product description

About Cell9102:

Cell9102 is Professional power tool battery manufacturers, to provide you with efficient, high quality, stable, reliable power tool battery.

We believe that efficient batteries can improve the quality of life.



Item Name: Cell9102 Replacement 9.6V-18V NiCad & NiMh Battery Charger for Black & Decker 12V 14.4V 18V Dual Chemistry Battery HPB18

Voltage: 9.6 - 18 Volt

Type: for Black&Decker 9.6V-18V NiCad & NiMh Battery

Color: Black

Condition: New



Compatible Original Battery Code: (Also charge Black+Decker 18V lithium battery)

for Black & Decker 9.6V 12V 14.4V 18V NiCad & NiMh Battery HPB96/ FSB96/ 90534824, FS12B, HPB12, FS120BX, FSB14, HPB14,

FSB18, FS18SBX/ 90501196, HPB18, HPB18-OPE



Package Include:

1*CELL9102 Replacement 9.6V-18V NiCad & NiMh Battery Charger for Black & Decker 12V 14.4V 18V Dual Chemistry Battery HPB18.

• The Cell9102 Advantage : Professional power tool battery manufacturing factory, with dozens of research and development team.
• Brand-new: Replacement 12V 14.4V 18V Dual Chemistry Battery Charger for Black & Decker 9.6V-18V NiCad & NiMh Battery HPB18.
• Certified Safe : Cell9102's MultiProtect safety system ensures complete protection for you and your devices.And 100% compatible with Black & Decker 9.6V-18V NiCad & NiMh Battery HPB18 HPB18-OPE FSB18 HPB14 FSB14 HPB12 FS12B HPB96 FSB96.
• Performance : The 90556254-01 NiCad & NiMh Battery charger for Black & Decker 12V 14.4V 18V battery use built-in overcharge, over-discharge protection to extend battery life, charger are CE FCC, ROHS certified, tested by manufacturer to match or exceed OEM products.
• What You Get : Cell9102 Replacement 9.6V-18V NiCad & NiMh Battery Charger for Black & Decker 12V 14.4V 18V Dual Chemistry Battery HPB18, 30-day money back and our fan-favorite 18-month warranty and friendly customer service.

Product description

Specifications:

Input: AC100-240V

Output: 12V / 1A

Compatible with: Black & Decker 12V Lithium Battery

Color: Black



Compatible with:

Black & Decker BL1110 BL1310 BL1510 LB12 LBX12 LBXR12 Battery



LED Indication Light:

Red: charging is running

Green: charging completed, battery full



Note:

💡Only suitable for Black & Decker 12V Li-ion Battery

⚡This charger don't work with black&decker Firestorm battery and PS130 battery!

⚡This charger don't work with Ni-MH/Ni-CD battery!

Make sure the charger connectors are matching the battery before using.



Warranty:

Come with 30 days money back.

You can contact us anytime from the date of purchase, we will try our best to provide you the best service.

• 💡Compatible with Black & Decker 12V Lithium Pod Style Battery.
• 💡Works with Black & Decker 12v BL1110 BL1310 BL1510 LB12 LBX12 LBXR12 Li-ion Battery.
• ⚡This charger don't work with black&decker Firestorm Battery and PS130 Battery!
• ⚡This charger don't work with Ni-MH/Ni-CD Battery and Slide-Style Battery!
• 💡 Input voltage: AC100-240V, Output Voltage:12V / 1A.Excellent charging function and short circuit protection. Time for a fully charged: 1.5 - 3 hours.

User questions & answers

Question:	Will this work with my black and decker ldx112 battery
Answer:	It works with the slide in “ Pod Type” batteries. Not “ Flat” batteries.
Question:	will charger and batteries work with 12 volt porter cable mini sawzall? pic of battery looks simular
Answer:	I don’t know. I don’t have a porter cable. Sorry
Question:	Will this work on a porter-cable pcl battery
Answer:	I am not knowledgeable about your question. Would hate to mislead you.
Question:	Will this charger work with a rockwell 3rill 12v lithium-ion battery
Answer:	I don't have an answer. I moved my household 3000 mi east and I am still getting organized. You'll have to "let your fingers do the walking". (yellow pages ;) )

Product description

Best after-sales service: 30 days money back and 12 months limited Warranty and 24 hours warmly service.



Specification:

1. Product Type: Replacement Battery charger

2. Compactible with: 12V Lithium-Ion Batteries For black and decker

3. Input: 100V--240V

4. Output: 10.8V-12V



Charger work for:

Black decker 12V Lithium-ion LBXR1512, Drill tool BDCD112



LED Indication Light:

Battery charging: Red light

Battery full: Green light.

Battery bad: first, it lights up red and shows charging. After charging for a while, it flashes at 2Hz.



About Hanaix:

Hanaix is specialized in designing and manufacturing high quality replacement batteries and chargers.

Hanaix constantly improve the products and service to satisfy buyer’s updated demand.

Hanaix try it best to cover the most popular brand: Bosch, Hitachi, Makita, Etc.

• Input: AC100-240V, Output: 10.8V-12V(US Plug). Only fit for 12v lithium ion LBXR1512 batteries.
• Black and decker 12v battery charger is smaller and lighter enough than the original charger, easy carry in your pocket or bag.
• Slide in style charger compatible with black decker 12v Li-ion LBXR1512 battery, drill tool BDCD112.
• Support quick charging, fully charge time take 1.5-3 hours depends on your capacity of battery.
• 100% compatible with the originals. CE, FCC and RoHS certified, short circuit protection make your battery safe.

• 【Charger Features】Input: AC100V-230V | Output: DC9.6V-18V | Model Number: 90556254-01 | 100% Compatible with Original Black and Decker Manufacturer Equipment
• 【Stable & Efficient】Made with high quality material, protect your battery overcharged, extending battery life. Indicator lights that show the status as batteries are charged and maintained, with LED temperature gauge lighting
• 【Replacement & Application】Replace for Black & Decker original charger 90556254-01.Compatible for All Black & Decker 9.6V 12V 14.4V 18V NiCad & NiMh Battery FS12B, HPB12, FS120BX, FSB14, HPB14, FSB18, FS18SBX/ 90501196, HPB18, HPB18-OPE, HPB96/FSB96/90534824
• 【Safe & Reliable】Our quality control department will check every item before shipping them out. And we sell well on foreign markets(North America, European areas, Australia, Japan, Korea etc), deeply loved and trusted by people all over the world
• 【Warm Note】We provide professional customer service. Any problems, please contact us by email and we will reply with help!

User questions & answers

Question:	Will this work on DeWalt products
Answer:	No, this charger only work with Black and decker 9.6v~18v Ni-cad and Ni-Mh battery.

Product features

Suitable for Black and Decker 9.6V 12V 14.4V 18V Ni-MH / Ni-Cd batteries

Specifications:

Input: AC100-230V

Output: DC9.6V-18V/ 800mA

Color: Black

Fit for Black & Decker 9.6V-18V Cordless Equiptments (Please search with "Ctrl+F" )

For Black & Decker A12, A12-XJ, A12EX, A1712, FS120B, FSB12, HPB12

Firestorm FS120B, FS120BX 244760-00, A1718, A18, HPB18, HPB18-OPE

Firestorm A18, FS180BX, FS18BX, FS18FL, FSB18

Product description

Item Specification:

Input: AC 100V-230V

Output: DC 9.6V-18V, 800mA Max

Chemistry: NiCad/ NiMh

Model Number: 90556254-01



Replacement Battery Charger:

For Black and Decker 90556254-01 , 90592360-01 ,90571729.



Compatible Original Battery Code:

For Black & Decker : A12, A12-XJ, A12EX, A1712, FS120B, FSB12, HPB12

For Firestorm : FS120B, FS120BX 244760-00, A1718, A18, HPB18, HPB18-OPE

For Firestorm : A18, FS180BX, FS18BX, FS18FL, FSB18



LED Indicator Code:

Stand by - Green Light Flashing

Charging - Red Light Solid

Fully Charged - Green Light Solid



Package Includes:

1 x Battery Charger for Black & Decker 9.6V 12V 14.4V 18V NiCad & NiMh Battery



Warm tips：

Only suitable for Black&Decker 9.6v-18v Ni-MH / Ni-Cd batteries, not for Li-ion batteries.

Make sure the charger connectors are matching the battery before using.

• Specification: Brand New | NiCad & NiMh charger | Support fast charging. Replacement for Black and Decker Battery Charger: 90556254-01 ,90592360-01 ,90571729
• Compatibility: 100% Compatible with Black and Decker 9.6V 12V 14.4V 18V slide style battery HPB18 HPB18-OPE FSB18 FS18BX FS180BX FS18C FS18FL 244760 HP188F FS180X HPB-18 FSB14 HPB14 FS14BX HPB12 FSB12 FS120B FSB96 HPB96
• Fast Charging: Advanced charging technology, universal 100 to 230V voltage input, charge batteries in a fast and highly efficient way.
• Built-in intelligent protection system against potential damage caused by Over-Charging, Over-Discharging, Over-Voltage,Over-Current, Over-Temperature
• Customer service: 30 days money back, and 24*7 hours prompt customer service.If you have any questions, please feel free to contact us, we will try our best to promise you an enjoyable shopping experience.

User questions & answers

Question:	Is this the same as 5103069-12 charger
Answer:	Hello, The 5103069-12 charger work for black and decker 18-Volt Ni-MH battery, our charger can work for black and decker 9.6V-18V NiCad and NiMh battery
Question:	Is this the same as 418337-07 charger
Answer:	THE SAME THING
Question:	I recently purchased Boetpcr 3.0Ah 18v batteries for my porter cable drills, does this charger work on those batteries? Thanks
Answer:	I don’t know about The Porter Cable products but I am sure if they are listed to work with them they should! They work great with the Black & Decker products! The batter charger should work great with all listed applications!

Product description

Item Specification:

1. Product Type: Replacement Battery charger

2. Compactible with: 9.6V-18V Ni-Cd& Ni-MH Batteries For Black and Decker

3.Input: 100V--240V

4.Output:9.6V--18V

5.Efficiency: 85W



Compatible With:

9.6V-18V Ni-Cd& Ni-MH Batteries For Black and Decker

Package Includes:

1 X Battery Charger for Ni-Cd&Ni-MH Batteries For Black and Decker

• 100% Compatible with All Black Decke NiCad & NiMh Batteries. Warm tips: Not for Lithium Battery.
• High quality dual chemistry replacement battery charger for Black & Decker original charger: 90556254-01 90592360-01 90571729.
• Compatible with Black Decker 9.6V 10.8V 12V 14.4V 18V NiCad & NiMh Battery HPB18 HPB18-OPE FSB18 FS18BX FS180BX FS18C FS18FL 244760 HP188F FS180X HPB-18 FSB14 HPB14 FS14BX HPB12 FSB12 FS120B FSB96 HPB96.
• Comply with FCC RoHS and CE security testing standards, Built-in protection against potential damage caused by overcharging, overheating and short-circuit protection. LED indicator communicates battery charge status, full charger time is 7 - 10 hours as original.
• 60 Days money back and 18 months manufacturer's support! 24*7 hours prompt customer service.

User questions & answers

Question:	Will this work with model PS3725 18volt
Answer:	Yes it will it's Universal 12V to 18V I have charge both with it works great.
Question:	Will this charge a "hyper tough cordless drill 18v battery
Answer:	No it will not, I specifically bought this to do that based on the previous answer and it does not. I want to thank the previous person for answering and wasting my time and money.
Question:	Will the charger work for b/g12 volt drill bg
Answer:	Yes
Question:	Will this charge 14.4v part# A
Answer:	Hello, thank you for your question. Yes, our charger is compatible with Black+Decker 14.4v part# A1714 battery. If you still have questions, please feel free to contact us by e-mail : [email protected]. Thank you!

Product features

FLAGPOWER Ni-cad&Ni-Mh Battery Charger 9.6V MAX and 18V MAX for Black and Decker HPB18-OPE HPB18 HPB14 HPB12 HPB96

Compatible Original Battery Code: for Black & Decker 9.6V 12V 14.4V 18V NiCad & NiMh Battery

• FS12B, HPB12, FS120BX, FSB14, HPB14, FSB18, FS18SBX/ 90501196, HPB18, HPB18-OPE

LED Indication Light:

• Red: charging is running
• Green: charging completed, battery full

Note:

• Only suitable for Ni-MH / Ni-Cd batteries. Not for Li-ion batteries
• Make sure the charger connectors are matching the battery before using.

What a great battery charger!

• Standby - Light On
• Charging - Red Light Flashing
• Full Charged - Light On (8Hours full charged in 3.0Ah battery)