12 best neiko hand sanders

Product description

The Neiko Close Quarter Drill has variable speed features and an angled, keyed chuck for operating when working in confined spaces.

• [CLOSE QUARTER]: This close quarter power drill has a 55-degree angle head that allows the drill to reach into places other drills can’t go and has a 3/8-inch keyed bit holder chuck for easy bit replacement to fit with a variety of applications with an included chuck key.
• [ERGONOMICS]: Ergonomically designed paddle trigger and pistol grip is designed for precise drilling and RPM control and utilizes a grip that is slightly textured to prevent slips and increase accuracy and efficiency.
• [VERSATILE]: The variable speed ranges from 0 to 1400 RPM for precision drilling in tight spaces with a forward/reverse switch that allows for easy directional changes to make fast work for home improvement jobs and more.
• [APPLICATION]: Drill is suitable for use on wood, composition materials, plastics, masonry, metal, and screws to be the perfect companion to the drill bits in your tool collection.
• [SPECIFICATIONS]: Power Supply: 120V ~ 60Hz, Motor Power: 3.8 Amps, ETL approved.

User questions & answers

Question:	what is dimension from back of chuck head to end of chuck
Answer:	Hello Evalu8or, This kit with all items included weighs a total of 4.15 lbs. Thank you for your inquiry!
Question:	How do you adjust the speeds I don’t see the variable speed control
Answer:	Yes, this hammer drill can certainly handle cinder block. Thanks for your inquiry!
Question:	Does this Close Quarter Drill have plastic or metal gears
Answer:	If you wish to lock the trigger for continuous drilling, then NO. If you wish a trigger safety lock then the drill rotation direction button has a "neutral" position that prevents the drill from engaging.
Question:	Anyone use this with a buffing attachment
Answer:	Yes, the brushes, made out of cabon , can emit sparks

Product features

Great for Tight Working Areas

The 55 degree angle allows you to reach into narrow an awkward spaces without scratching up your knuckles.

Speed Control

Paddle style trigger allows you to easily tether in speeds between 0 - 1400 RPM for precise drilling operations.

Versatile Uses Around the Home

Great for a wide range of projects and materials including wood, composition materials, plastic, and metal.

Easy To Use

Quickly change the direction with the direction switch conveniently located at the bottom of the machine.

Secure Hold

Universal three jaw design allows you to securely hold onto drill bits without disruption in your workflow.

Comfort and Control

Ergonomically designed head allows you to easily grasp the machine with a secure grip while working.

Product description

This circular sanding pad with 5" diameter constructed of thick foam is used for sticking pressure sensitive sand discs and features a blue vinyl face. The hub construction gives off a swirl-free finish when used for buffering, sanding, and or simple touch up.

• [PSA]: Blue pressure sensitive adhesive (PSA) backing design sticks onto flat vinyl surfaces and is most ideal for woodworking projects when used with orbital and dual action (DA) sanders.
• [RPM]: Fast and durable oscillating speed operates at 10,000 RPM that stands up to a high frequency achieving a consistent and smooth finish on your home/automotive projects and more.
• [QUALITY]: The high-quality polyurethane material is lightweight and allows a flexible, but firm touch without feeling stiff for maximum control and efficiency in application.
• [VERSATILE]: This sanding disc can be used with a variety of other discs for feathering, scratch removal, paint stripping and paint preparation.
• [SPECIFICATIONS]: This universal standard backing disc size is 5" x 5/16" with 24 threads and strong with a rigid body to fit most air sanders for woodworking, automotive work, and industrial settings.

User questions & answers

Question:	Where can I get the 5/16" threaded shank
Answer:	do not understand question
Question:	WILL THIS PAD WORK ON PORTER CABLE SANDERS
Answer:	the distance between centers for the mounting screws is 54mm. they fit my No 3, 100mm vice perfectly.
Question:	can i use this on my 7amp grinder
Answer:	Dimensions are 3/4 inch by 4 inch. The holes are 1 inch from outside edge and 5/16 inch from the bottom. Hope this helps.
Question:	will the glue holding the vinyl to the backing foam resistant to temperature? Will it delaminate in use if the pad and it heats up
Answer:	This mechanics vise is made in China

Product description

8" DAQ Air Dual Action Auto Body Gear Driven Orbital Disc Sander With Pad. Free Speed: 850rpm. Air Consumption: 5cfm. Inlet size: 1/4" NPT. Includes Pad

• Large eight inch PSA surface pad area allows work to bigger areas to keep flat while getting highs and lows for a smooth end
• Convenient thumb throttle switch offers user control over speed of operation to ensure there is not power overexertion
• Heavy weight regulator work efficiency and strength with ease and in support of grids for better sanding results
• Built-in muffler in rear exhausts offers soft, quiet vibrations and minimizes hand pressure
• Specialized finger molded handle prevents hand from slipping towards working drum and offering a secure grip

User questions & answers

Question:	What is the minimum specs (size) of the air compressor required for this to work
Answer:	T6D has not been tested for this type of application. Unfortunately we are unable to recommend it.
Question:	Could this be used on a wood deck
Answer:	The 6-inch plates fit #6 Mechanics vises.
Question:	Could anyone point me in the direction of replacement parts for this sander
Answer:	4"
Question:	what kind of sandpaper
Answer:	Thank you for choosing Irwin tools. Our goal is to provide the highest quality service. We do have the dimensions for these jaw plates: 152mm (6.00") Plate length, 25.4mm (1.00") Jaw plate height, 12.7mm (0.50") Jaw plate width, 8.3mm (0.33") Fixing hole diameter, 102mm (4.00") distance between fixing hole centers, 12.7mm (0.500") distance from bottom of jaw plate to fixing hole center, 25.4mm (1.00") Distance from side of jaw plate to fixing hole center.

Product description

Neiko Tools USA ANSI Compliant Size Adjustable Safety Goggles. Extra-soft PVC frame offers maximum comfort.

• Hook and loop face design with hook and loop function provides easy closure for removing disc without wearing out overall strength
• Fast and durable oscillating speed operates at 10,000 RPM withstanding high frequency to achieve a consistent, smooth finish
• High quality polyurethane material construction used for variety of applications tailored to be either rigid or flexible but never stiff
• Universal standard backing pad size 6" x 5/16" with 24 threads is durable and fits most air sanders in woodworking, garages, or industrial settings

User questions & answers

Question:	Will this for my Porter Cable model 7336 da sander
Answer:	Yes Chris it swivels 360 deg. and it has 2 base locks. Very happy with this vise.
Question:	will it fit a snap on brand, Da sander
Answer:	Trust me the warranty is not the issue on these cheap vises, its the hollow vise itself that's the issue. I mean if they sell you a big long turd and I say it has a lifetime warranty on breakage but' it breaks into anyway sure' they'll give you another turd why not? It only cost $10 bucks for the meal that made it anyways so they can replace it several times still having making profit. Eventually they know you'll call it a day and go buy another turd/tool hoping its better than this one. Fact is you get what you pay for the first time with tools and if your bending pretzels with this vise it will be a fine one forsure. Don't bend/pry on anything heavy with it though as its a very light weight vise and how I know its hollow. Understand too these warranties are only for defects, not misuse so "maybe" they'll replace the hollow turd...Maybe not, either way they already have your money now don't they?
Question:	will this work with the falconauto 6 inch orbital sander polisher grinder to use with 3M scotch brite very fine pads for corian countertops? thank yo
Answer:	Its made in china, but it is much better than most vise's I have seen. No slop when its opened or closed and the swivel locks actually work easily. Overall a good vise for the money for the homeowner.
Question:	will it fix a harbor freight polisher
Answer:	The gross weight of the IRWIN 49355504 is 12.950 LBS.

Product features

For Portable Electric Drills

The Neiko 30263A Sanding Pads 6-Inch Hook and Loop Face for Random Orbital Sanders is made with high quality polyurethane material that can be used for variety of applications and is tailored to be either rigid or flexible but never stiff. It is designed so that the hook and loop function provides easy closure for removing the disc without wearing out the overall strength of the sander.

Freehand Sanding

The Neiko 30263A Sanding Pads 6-Inch Hook and Loop Face for Random Orbital Sanderswill assist by giving you fast and durable oscillating speed of at 10,000 RPM and withstands high frequency to achieve a consistent and smooth finish.

Product description

The Neiko 11146A Premium Zirconia Flap Disc can operate with a maximum speed of 13, 300 RPM. Each 120 grit flap disc in the 10-piece set is outfitted with an arbor size of 7/8-inch.

• [DURABLE]: 10 Abrasive wheels constructed of industrial grade premium blue zirconia for strength, durability, and extended disc life.
• [HEAVY DUTY]: 120 grit flap wheel is coarser in build and is ideal for heavier stock removal and sanding.
• [APPLICATION]: Flat Type 27 disc build is effective for blending, smoothing, finishing flat surfaces, deburring and grinding contours. Perfect for radius grinding on steel, sheet metal, welding, machining, heavy duty equipment and industrial maintenance.
• [QUALITY]: Resin fiber construction with fiberglass backing plate absorbs vibrations reducing smear during use.
• [SIZES]: Each disc measures at 4-1/2-inch diameter with a 7/8-inch arbor size, making it compatible with most grinders. High speed of 13,300 revolutions per minute (RPM).

User questions & answers

Question:	Has anyone used these to clean up welds? Or another grit level
Answer:	Yes, That is what I use them on. they are just a little firmer than the OEM pads.
Question:	Can these be used to grind concrete
Answer:	As long as the threaded shaft is the same I would think that this pad will work on your grinder. You should also check the rpm's of your grinder. This pad works best at a no load of 10,000 rpm's. Hope this helps.
Question:	Will this work to sand stain off the deck
Answer:	I bought this pad and it lasted about 5 months. Mine was the 5" instead of the 6. It will not last for heavy everyday use. Do yourself a favor and get the porter cable 13700.
Question:	when I try to order the bevel 120 grit, it says it's 60 grit...why
Answer:	This vise is made of cast iron. It is manufactured in China.

Product description

Neiko 30266A Hook and Loop Backing Pad features a flexible, soft edge allowing exact detailing on all jobs. This tool covers 6” surfaces and operates at a high speed of 10, 000 RPM to get your work done quickly. It is constructed of strong polyurethane material to withstand heavy duty machinery and for long tool service life. The pad is designed at 6 in. x 5/16” and 24 male thread to fit multiple standard orbital sanders. It is the perfect tool to add to any home garage, workshop, or professional setting.

• [QUALITY]: High quality polyurethane (PU) material construction used for variety of applications tailored to be either rigid or flexible but never stiff. Hook and loop function provides easy removing of disc without wearing out overall strength.
• [CONVENIENT]: Universal standard backing pad size 5" x 5/16" with 24 threads is durable and fits most air sanders in woodworking, garages, or industrial settings for use with polishers, buffers, orbital sanders and dual action / DA sanders.
• [APPLICATION]: Using a backing pad with sanding discs properly allows for airflow behind the sanding disc which substantially increases the life of the disc from 30% to 50%. This increased airflow additionally allows for debris to flow out improving contact and sanding effectiveness
• [PRECISION]: Unique tapered edge has a 29-degree flexibility for perfect detailing on contoured surfaces protecting your surface paint and clear coat.
• [HEAVY DUTY]: Fast and durable oscillating speed operates at 10,000 revolutions per minute (RPM) withstanding high frequency to achieve a consistent, smooth finishes.

User questions & answers

Question:	Work with a shurhold 3100 orbital polisher
Answer:	I would use this on wood .I do autobody work for a living and I have used this on wood .its a off center orbital sander it 's not like a finish sander it might leave sweral scratch marks.
Question:	Will this fit a hutchins 3500 da sander
Answer:	depending on maker you can get parts on line
Question:	Will this work with the dewalt dwe6401ds random orbital sander
Answer:	8" adhesive discs. Make sure you have the proper compressor, though. Smaller ones will not sustain the force needed for a continuous spin. Other than that, it's a great little tool.
Question:	will this work in replacing the sanding pad on the Dewalt DW443 random orbit sander? Thanks
Answer:	the pad has an attached threaded shank, In the photo, it is covered by a black thread protector.

Product description

This air angle polisher with a high free speed range of 1,500-2,600 RPM for buffing and polishing a wide range of surfaces - paint, metal and plastic to a high-gloss professional finish. Heavy-duty motor lightweight ball-bearing construction for long life.



Pad Diameter: 7 Inch

Free Speed: 2,600 RPM

Spindle Size: 5/8 in. - 11

Air Inlet Thread NPT: 1/4 Inch

Air Hose I.D. Size: 3/8 Inch

Avg. Air Consumption.: 15.2 CFM

Noise Level: 85 dB

Air Pressure: 90 Psi

• [APPLICATION]: This air tool is light and easy-to-handle and fits standard ¼” air hoses at 90 PSI for a perfect polishing/buffering finish on different materials on cars/vehicles and many more applications in conjunction with an orbital sander, surface grinder, or other sanding/grinding tool.
• [LIGHTWEIGHT]: Weighing in at only 4 (pounds) lbs. and powerful, this air buffer’s free speed is rated between 1,500-2,600 RPM for buffing and polishing paint, metal and plastic surfaces with power and ease.
• [LOW NOISE]: The ball bearing construction provides vibration free performance with a muffler exhaust that allows quiet operation at home or in the garage.
• [FEATURES]: The buffing and polishing speed can be controlled by feathering the trigger and side handle mounts easily for left- and right-hand operation for all of you home or car improvement projects.
• [AUTOMOTIVE]: Ideal for restoring dull car paint, removing rust, or fine scratches to reveal a beautiful gloss finish on your vehicle’s exterior.

User questions & answers

Question:	Has anyone used it for buffing gel coat on a boat
Answer:	It should it fits both of mine and they're both two different brands but check the thread size before you buy anything
Question:	Whats the HP rating of the motor
Answer:	I would think it would I have several different brands of 6 in orbital sanders and the pads interchange I also have used scotch brite pads to attach to the hook it pads and they work just fine
Question:	anyone know what compressor would be suited to use this for polishing cars maybe a gas compressor as opposed to an electric one? any recommendations
Answer:	I use it on a harbor freight 6 in da sander
Question:	I want to get this for my husband, he has an 8 gallon compressor, is it sufficient
Answer:	Hi P.Deutsch, Thanks for reaching out. You will need compressor that can provide at the minimum 6-9 CFM Average Air and Average operating PSI of 70-100. I hope I have answered your question. Please reply to this message below if you need further assistance. Best Regards.

Product description

The niko 7" Variable speed Polisher is ideal for a desired finish on different materials and applications.

• [APPLICATION]: Electric buffing and polishing machines are used to polish of buff the different types of surfaces and floors in your home improvement or automotive projects at home or in the garage.
• [QUALITY]: This polisher/buffer has a powerful 1,300 W motor and comes with a heavy duty die cast aluminum head and all ball-bearing mechanism that works together to give high performance output.
• [FEATURES]: This tool has six variable speeds that range between 1,000 and 3,000 RPM to give the exact and precise needed output to fit your surface material and job application.
• [EGONOMICS]: This electric unit features a trigger lock and utilizes an ergonomic TPR soft grip and multi-position side handle for greater control, comfort in use, and accuracy in application.
• [INCLUDES]: A one piece 7-inch hook and loop backing pad to provide easy attaching of different types of polishing and buffing pads to your machine and is also a UL/CUL listed product with a cord and plug that is tested for safety and durability.

User questions & answers

Question:	Is the backing plate flexable
Answer:	I have used these only for removin old finish on my deck and for grinding the strips on the strip canoe my son and I made. I can't answer it would grind concrete but would guess probably not.
Question:	I'm abit confused concerning polishing pads Question will any 7" hook loop/ velcro Foam or wool pad fit the polisher
Answer:	It will work but wouldn't recommend it as you could damage your surface. You would be better off using a belt or sheet sander and 60-80 grit sandpaper.
Question:	Does this rotary buffer have continuous speed control or just stepping speeds
Answer:	These are junk
Question:	how many amps
Answer:	Not sure but it does fit the typical DA that takes a 6 in pad

Product features

Durable Construction

Our powerful 1,300 watt motor delivers outstanding buffing and polishing capabilities. This allows you to choose speeds ranging from 1,000 to 3000 RPM for all surface materials.

Maximum Durability

Motor head is constructed from a heavy duty die cast aluminum material to last throughout multiple use.

High Versatility

The 7" hook and loop backing pad allows you to attach multiple types of pads for a wide range of applications.

Interchangeable Side Handle

Adjustable side handle allows for both right and left handed operations.

Ergonomic TPR Soft Grip

Reduce even more hand fatigue with this ergonomically designed grip to keep you comfortable while providing a non slip grip.

Adjustable Speed

Easily use the speed control dial to choose which speed is best for your application.

Product description

The Neiko air Sandblaster gun is great for all your abrasive Blasting needs. Restore your industrial surfaces by ridding away stubborn discoloration, defects and corrosion from iron, steel and wood. Use it on your personal appliances, too – clear away unwanted grime on car rims, fences and bikes to restore your items back to life. The Blaster accepts a range of media to tackle any surfaces: sand of up to #100, glass beads, silicon carbide, and more.

• [APPLICATION]: This air sand blasting gun in handheld and useful for a variety of needs, which include etching mirror and glass, removing metal rust, paint, oil, oxidation, grime and stains such as dirt from tiles and grout to be the perfect companion for home improvement work.
• [VERSATILE]: The handheld grip is ergonomic, lightweight and portable, which makes sandblasting versatile for both industrial heavy-duty work such as paint stripping and home appliance maintenance like rust removal.
• [COMPATIBILITY]: The gravity feed hopper accepts multiple types of media including silicon carbide baking soda, sand, aluminum oxide beads, glass, and walnut shells to blast away a variety of unwanted surfaces.
• [POWER]: The pressurized compressed air from an air compressor powerfully accelerates gravity fed abrasive media through the 5.0 mm, 2-15/16” x 7/32” diameter nozzle to cover a greater surface area and profile.
• [SPECIFICATIONS]: Operating pressure: 90 PSI, Air consumption: 7 SCFM, sand specification: aluminum oxide (#46 - #100).

User questions & answers

Question:	Would this work on diecast metal cars? Like hot wheels
Answer:	The Hutchins is a 6" disc. You'll want to stick with the same diameter. However, the stud is most likely the same size.
Question:	Will this help strip paint off a motorcycle frame
Answer:	Yes it will work with your sander. But keep in mind it will not work if you have the dust collector attachment .
Question:	What adaptor do I need to purchase to attach the air hose to the gun
Answer:	Only if your DeWALT is 5/16” and 24 thread per inch count. And this is for Velcro style attachments
Question:	It states that air consumption is 7 scfm. does that mean the air compressor must at a minimum deliver air at that rate? otherwise
Answer:	These are now the only wheel I use for weld cleanup. I quit using grinding wheels. I have all four grit levels, the 60 is good number for for general cleanup on steel. On a really heavy weld I might drop down to a 40. I used to use only Dewalts but for the price these work great.

Product features

Stunningly Versatile

The Neiko 30068A Abrasive Air Sand Blaster Handheld Gun is the ideal machine for a variety of requirements. Whether you are looking for a sand blaster for industrial purposes or DIY projects at home, this power tool can performs functions such as etching mirror and glass, removing metal rust, paint, oil and oxidation and cleaning dirt from tiles and grout.

Ergonomic and Portable

This sand blaster by Neiko comes with a handheld frame with which you get a good grip. It is super ergonomic, lightweight and portable, making it versatile for both industrial heavy duty work and home appliance maintenance.

Product description

DISC FLAP 4-1/2",A/O,FLAT, 40

• Practical & cost effective: combination of 40 grit Coarse & flat type 27 shape offers grinding, blending and finishing with one product
• Durability: combination of high performance aluminum oxide Resin Fiber with fiberglass backing plate for improved strength and versatility with less gouging and burning
• Versatility: commonly used for heavy duty Stock removal, deburring, grinding and shaping on wood, metal and masonry as well as paint and rust removal
• Popular choice: preferred to grinding wheels because flap-discs are lightweight, easy to maneuver and require less change over time, saving you time and money
• COMPATIBILITY: Each 4-1/2 Inch x 7/8" Arbor Size Flap Disc Can Be Used With Angle Grinders up to 13, 000 RPM, Perfect for Professionals as Well as Home and Serious DIY Projects Alike

User questions & answers

Question:	does it sand flat
Answer:	The only information i have on this Polisher is the following. I hope this can help and ill look into finding the exact HP soon.* Over all length: 16"* Net Weight: 6.5 lb* Air inlet Size(NPTF): 1/4"* Recommand hose size(ID): 3/8"* Spindle thread size": 5/8" -- 11 THD* Pad size: 7"* Air consumption: 6 CFM* Free speed: 2600 RPM* Sound level(DBA): 85
Question:	The chrome on my runner boards is bubbling and chipping. Will this work to sand the remaining chrome off and prep for Spray on bed liner on them
Answer:	If you expect to run the buffer continously, you'll need a 5 HP, 2-stage electric compressor. For gas, more like 8 HP 2-stage. You might be able to get away with a little smaller unit, but it will get hot from being overworked.
Question:	Will these flap disk grinders fit black and decker angle grinders
Answer:	NO, you will not have enough volume to sustain it, most likely you would get about 30 seconds, then drop right off, and would have to build up for a few minutes, I think a commercial 5 or 7 1/2 hp compressor with a 80 gal tank would be required to run continuously,at high throttle position. Of course a lot depends on the torque being used for your application. Dan
Question:	will these disks work to sand wood
Answer:	Yes. It is the same thread pitch as the Shurhold 3100.

Product description

The Neiko 11255A High Density Premium Zirconia Flap Disc can operate with a maximum speed of 13, 300 RPM. Each 40 grit flap disc in the 10-piece set is outfitted with an arbor size of 7/8-inch.

• [DURABLE]: 10 Abrasive wheels constructed of premium blue zirconia for strength, durability, and extended disc life.
• [HIGH DENSITY]: Industrial grade zirconia for heavy duty material removing and a long life.
• [HEAVY DUTY]: 40 grit flap wheel is coarser in build and is ideal for heavier stock removal and sanding.
• [APPLICATION]: Flat Type 27 disc build is effective for blending, smoothing, finishing flat surfaces, deburring and grinding contours. Perfect for radius grinding on steel, sheet metal, welding, machining, heavy duty equipment and industrial maintenance.
• [QUALITY]: Resin fiber construction with fiberglass backing plate absorbs vibrations reducing smear during use.
• [SIZES]: Each disc measures at 4-1/2-inch diameter with a 7/8-inch arbor size, making it compatible with most grinders. High speed of 13,300 revolutions per minute (RPM).

User questions & answers

Question:	How does it attach to a ryobi grinder
Answer:	It should. Be sure it is large bough to extend past the backing disc. This will prevent contact with the backing disc which can damage the paint.
Question:	Where are they made
Answer:	The buffer has variable continuous speed control.
Question:	Are these disc good enough to achieve a smooth finish on metal
Answer:	This is a 11 amp polisher.
Question:	Can I use it on a harbor freight trailmaster angle grinder 41/2 inch
Answer:	I have not buffed gel coat on a boat but I have buffed almost almost everything else with it it's a very good buffer but you have to have a lot of air from your air compressor a small unit doesn't work. 5hp or bigger with a 50 gallon tank or bigger

Product description

The Neiko 30252A Water and Oil Separator features a universal 1/4-inch NPT inlet and outlet, made compatible for air tools and spray guns. The separator has a maximum air pressure of 90 psi.

• Eliminates water, oil, dust, and particles in air line from air compressor
• Universal 1/4-inch NPT inlet and outlet design connects air line with pneumatic air tools and spray guns; max operating air pressure is 90 psi
• Stops water vapor and particles from entering pneumatic tools to extend tool life
• Catches water vapor and oil particles from entering spray guns to preserve tool life and provide a cleaner paint job
• Rust-proof aluminum housing and brass fittings provide additional tool durability

User questions & answers

Question:	Can I put this after the regulator or will that drop pressure too much
Answer:	I imagine it will. I use it to strip off qpd and parkerized finishes that are harder than paint
Question:	I have a supply air line hanging from the ceiling and I connect to the bottom of it. Which way would the filter be hanging for best performance
Answer:	Your air hose should be attached to and a part if your Neiko blasting gun. Your air compressor should have the appropriate c ok connectors to connect the hose to the air comoressor
Question:	can someone tell me which side is in and out
Answer:	No, absolutely not. Go with double the cfm for a compressor if you can. If you want to know why, keep reading. The short is if it uses 7 and the compressor makes max 7, it will never shut off and your pressure in the tank will slowly diminish. Compressors also have a duty cycle, meaning the ration of on and off. If it's 40%, that means out of say 10 minutes total, it can only be on a total of 4 minutes or you will eventually burn it up. I was an engineer at a blasting media company that also sold equipment. Our demo cabinet used slightly less air and we used a 20 HP compressor for continuous usage. That is very roughly 80cfm @ 100psi. When we hooked a second blast pot to it that used twice the air, you could quickly tell. That is less than 25 cfm total usage and we pretty much maxed an 80 cfm compressor.
Question:	OK just got this thing, no markings for flow directions and two conflicting answers for inlet and outlet. which is correct
Answer:	It is slightly flexible and cushioned.

Product features

Air Tools' Best Friend

Easily attaches to a variety of air tools and goes unnoticeable due to its lightweight feature. Just twist it onto your air tool.

Easy Monitoring

Clear polycarbonate housing allows you to monitor amount of dirt and debris is being caught so you know when to change out the filter. Just a simple press of the release valve ejects all the waste trapped inside.

Save Time and Money

Prevent your air tools from breaking down and protect it from inevitable foreign debris and particles from entering. A simple product like this can extend your tool life.

Easy to Use

Simply press the valve release to eject waste in a flash with minimal cleaning.

Reliable Filtering

Filter helps foreign particles stay out of your air tools to extend and maximize your tools' life.

Secure Fit

Includes a 1/4" NPT that tightly fits into couplers without any leakage.