13 best compressed air lubricators

Product description

ARO-Flo 1000 Series Inline Lubricator

-1/4"" NPT Port

-51 SCFM

-150 psig Max inlet Pressure

-23-125°F Temperature Range

-Polycarbonate Bowl w/ guard

From the Manufacturer

ARO-Flo mist-type Lubricators help ensure that pneumatic devices receive the required lubrication to maintain peak performance, reduce wear, and prolong service life. They are designed to provide the correct amount of oil for most general applications in a pneumatic system, delivering a constant ratio of oil to airflow. Precise oil feed adjustment sets the proper oil drip rate. Lubricators should be installed to the downstream application to ensure effective distribution of oil.

• 1/4-Inch NPT
• Standard adjustment option
• Polycarbonate bowl with guard 0.6-Ounce bowl capacity
• Standard fill option
• 51 CFM

User questions & answers

Question:	Is this device classified as a Micro Mist oil lubricator
Answer:	Yes, it is an oil mist lubricator. you can adjust how much droplets of oil
Question:	Does it come with a mounting bracket
Answer:	No it does not.
Question:	Is the picture correct? with a max max drain level? Max drain levels arefor filters, not Lubricators
Answer:	EXCEPT FOR THE MARKINGS, I think the outside housings are the same for both the filter/water separator and the lubricator . It look like you have the one for the water separator which shows the MAX DRAIN LEVEL. The one for the lubricator should have MIN OIL LEVEL marked on it. The picture I have in this ad shows the correct housing.
Question:	Does it leave oil in the air line after use? I was planning to add a valve to bypass it and use clean air (painting, tires, etc
Answer:	Of course it leaves oil in the line. A separate line is always necessary for painting and worth the extra couple bucks

Product features

Ingersoll Rand ARO, ARO-FLO Series Lubricators

ARO-Flo mist-type lubricators help ensure that pneumatic devices receive the required lubrication to maintain peak performance, reduce wear, and prolong service life. They are designed to provide the correct amount of oil required for most general applications in a pneumatic system, delivering a constant ratio of oil to air flow. Precise oil feed adjustment sets the proper oil drip rate. Lubricators should be installed dose to the downstream application to ensure effective distribution of oil.

Tools and Equipment Operation at Peak Performance

Simply put, air flows efficiently through ARO-Flo filters, regulators, and lubricators. This means less air is choked during the air preparation process, and your equipment can perform at its peak performance.

ARL-Flo Series FRL's

Clean, optimally regulated air is a key ingredient that enables effective and efficient operation of tools, equipment, and machinery in almost every industry. As such, the use of air preparation devices, such as filters, regulators, and lubricators is an excellent means of keeping your air supply in top condition, as well as enabling your tools and equipment to operate at their peak performance.

About ARO Ingersoll Rand

For more than 100 years, Ingersoll Rand ARO has been the business of the design and manufacture of compressors, pneumatic tools, and air preparation equipment. Clean air is a key ingredient that enables effective and efficient operation of tools, equipment, and machinery in almost every industry. As such, the use of air preparation devices, such as filters, regulators, and lubricators (FRLs) is an excellent means of keeping your air supply in top condition, as well as enabling your tools and equipment to operate at their peak performance. The ARO-Flo Series FRLs continue the tradition of offering premium products for your operation, and raises the bar in the industry for safety, flow performance, and modularity.

Product description

ALMOST ALL PNEUMATIC TOOLS PERFORM BETTER WHEN LUBRICATED WITH OIL. INJECTING AN OIL MIST INTO THE AIR-STREAM WHICH POWERS THEM CAN CONTINUOUSLY LUBRICATE VALVES, CYLINDERS, AND AIR MOTORS FOR PROPER OPERATION AND LONG SERVICE LIFE.

• 1/2" MID FLOW LUBRICATOR / OILER FOR PNEUMATIC AIR TOOLS ON COMPRESSED AIR LINES.
• 105 CFM FLOW RATE, 5oz POLYCARBONATE BOWL WILL HOLD 5 FLUID OUNCES OF AIR TOOL LUBRICANT. PLEASE NOTE::: 1/2" NPT MEASURES 0.850" OUTSIDE THREAD DIAMETER IN INCHES.
• 215 MAX INPUT PRESSURE, 145 MAX OUTPUT PRESSURE. POLY BOWL IS VISIBLE THROUGH METAL BOWL GUARD TO VIEW OIL LEVELS AT A GLANCE.
• RECOMMENDED LUBRICANT IS ISO-VG32 OR ANY LUBRICANT THAT IS SPECIFIC TO PNEUMATIC AIR TOOLS.
• YOU CAN CONTROL THE AMOUNT OF OIL FLOW BY ADJUSTING THE ADJUSTMENT SCREW ON TOP OF THE LUBRICATOR. OPERATING AND INSTALLATION INSTRUCTIONS INCLUDED.

User questions & answers

Question:	Does this come with a mounting bracket? If not, what size bracket hole would I need to mount this? Thanks
Answer:	This unit does not come with a mounting bracket

Product description

HIGH FLOW FILTER - REGULATOR - LUBRICATOR COMBINATION INCLUDED FREE GAUGE & WALL MOUNTING BRACKET FILTER SPECS: 300 PSI MAX 5 MICRON FILTER 2.7oz BOWL CAPACITY VISUAL SIGHT GLASS 180 CFM FLOW RATE REGULATOR SPECS: 180 CFM FLOW RATE EQUIPPED WITH PRESSURE GAUGE 7 - 175 ADJUSTMENT PRESSURE 300 PSI MAX LUBRICATOR SPECS: 5.1 oz METAL BOWL 300 PSI MAX 180 CFM FLOW RATE FEATURES : l Compact design -- suitable for limited space application. l Miniature type -- Easy for installation

• H/D HIGH FLOW 3/4" COMBINATION FILTER-REGULATOR-LUBRICATOR W/ GAUGE
• FILTER: 300 PSI MAX - 5 MICRON FILTER - 2.7oz METAL BOWL CAPACITY - VISUAL SIGHT GLASS
• REGULATOR: 7 - 225 ADJUSTMENT PRESSURE - 300 PSI MAX
• LUBRICATOR:OIL FILL ADJUSTMENT TO REGULATE OIL FLOW - 5.1oz OIL CAPASITY - SIGHT GLASS
• Manual Drain!!!!!!!!!!!

User questions & answers

Question:	Which side is the inlet on
Answer:	from the Filter on the left.
Question:	Can the oil lubricator be turned off
Answer:	yes. you can adjust it.
Question:	Iown:27gal.oil-lub.aircomp.,1.9 hp,w/single-stage oil lub. pump, oil-lub.belt drive&high-flow reg. is this what i need or overkill? other recommends
Answer:	It might be a little overkill for your system, but that depends also on your needs. If you use air tools on your air lines that need to get lubrication from the air line then it will work for that but you possibly could find a smaller oiling system. I run it on a 80 gal, 5hp, 2 stage-oil lubed compressor.
Question:	Where is this item made
Answer:	Made in Taiwan

• 【Product Name】Air lubricator （Filter accessories）
• 【Size】1/2''NPT
• 【Material】Aluminum
• 【Maximum Pressure】150Psi【Temperature Range】41-140℉
• 【Features】The lubricator can lubricate the moving parts of the body, and can lubricate the parts that are not convenient to lubricate, which greatly extends the service life.

Product features

Pneumatic Oil Lubricator (With Guard)

• Air inlet size:1/2 inch NPT
• Pressure Range: 0 ~ 150Psi
• Operating Temperature Range: 40-140°F(5-60℃)
• Body Material:Aluminium Product

Hard Transparent Measuring Cup

It is Easy to Observe the Oil Content in the Transparent Filter Glass. There is a Metal Cover Protecting the Filter Cup to Make the Product More Durable. Strong Sealing, Good Pressure Resistance, Not Easy to Corrosion. the Cup Should Not Exceed 80% of Its Capacity.

Accurate Oil Volume Adjustment

Precise Oil Amount Adjustment Knob Can Adjust the Oil Amount According to Different Requirements to Achieve Maximum Lubrication and Extend the Service Life of the Equipment.

Precision Aluminum Material

Made of Precision Aluminum, the Surface Has Been Passivated and Will Not Rust or Moldy. Compact Structure, Impact Resistance, Surface Spraying Treatment, Corrosion Resistance.

Product description

PneumaticPlus SAU Series Modular Air Filter Regulator Lubricator units offer a complete airline solution for the most effective air filtration, pressure control and air lubrication to keep your air tools working properly. . The SAF Filter comes standard with a 10 Micron Particulate element that removes harmful debris and moisture. The SAR Regulator provides precision pressure control that can be adjusted and set using the locking knob. Oil Injection on the Lubricator can be adjusted and completely turned off as necessary to your application. SAU Series Modular Air Filter Regulator Lubricator units are offered with Drain (Manual or Auto) and Bowl (Metal or Polycarbonate) options to better suit your needs. Search for different bowl and drain options by typing SAU PneumaticPlus in Amazon’s search box. SAU Series units provide an easy solution to drying and lubricating your air system with precision control. DO NOT INSTALL A POLYCARBONATE BOWL IN PRESSURES THAT EXCEED 150 PSI OR WHERE THERE IS A PRESENCE OF SOLVENTS HARMFUL TO POLYCARBONATE. PneumaticPlus SAU Series Combo Units provide quality air filtration for compressed air applications with the flexibility to adapt to the changing needs of your system. Its modular design allows for quick, simple connect or disconnect of units to customize your unit to your specific needs, requiring only a screwdriver or hex key. Units can be installed in any location on a single plane without requiring changes to existing piping. SAR Regulators can be mounted either up or down, and the pressure is controlled using the adjustable locking knob. SAF Air Filters remove harmful debris and moisture from your air supply. SAL Lubricators can be adjusted easily to specifications of your tools and applications for proper protection. Diverter blocks may be used to supply air to secondary locations. Units are designed to fit National Pipe Thread (NPT) sizing. Please visit our Amazon Store for our complete line of air products.

• Max. Supply Pressure: 250 PSI / Max. Operating Pressure: 0-150 PSI
• 10 Micron Particulate Element / Flow Rate: 176 SCFM @ 90 PSI
• Manual Drain, Poly Bowl w/ Metal Guard, Port Size: 1/2" NPT
• Use Metal bowl in pressure exceeding 150 PSI or when solvents harmful to polycarbonate is present
• Pressure Gauge, Bracket Included

Product description

3/4" HEAVY DUTY HIGH FLOW COMBINATION FILTER / REGULATOR & LUBRICATOR W/ GAUGE. 215 PSI MAX OUTPUT 3/4" FEMALE NPT INLET X 3/4" FEMALE NPT OUTLET EQUIPPED WITH WALL MOUNTING BRACKET DESIGNED FOR BOTH 1 STAGE AND 2 STAGE APPLICATIONS 250 PSI MAX INPUT PRESSURE 215 PSI MAX OUTPUT PRESSURE PARTICULATE FILTER REMOVES 95% OF MOISTURE, OIL AND DEBRIS REGULATOR WILL REGULATE AIR PRESSURE BETWEEN 7 - 225 PSI LUBRICATOR EXTENDS THE LIFE OF YOUR AIR TOOLS BY KEEPING THEM LUBRICATED FILTER / REGULATOR SPECS: 3/4" ( TOP AND BOTTOM PIGGY BACK TYPE) 215 PSI MAX OUTPUT 5 MICRON FILTER INCLUDED MANUAL PUSH DRAIN LOCATED BOTTOM OF METAL BOWL. PUSH TO RELEASE MOISTURE 2.7oz BOWL CAPACITY ( METAL BOWL) WITH VISIBLE SIGHT GLASS 120 CFM FLOW RATE EQUIPPED WITH CENTER BACK MOUNT PRESSURE GAUGE 7 - 225 ADJUSTMENT PRESSURE LUBRICATOR SPECS: 3/4" -MAX PRESSURE: 215 PSI OUTPUT -INLET OUTLET: 3/4" INLINE -OIL FILL ADJUSTMENT TO REGULATE OIL FLOW TO THE AIRLINE - 2.7oz OIL CAPACITY METAL BOWL OPERATING & INSTALLATION INSTRUCTIONS INCLUDED

• 3/4" HEAVY DUTY HIGH FLOW COMBINATION FILTER / REGULATOR & LUBRICATOR W/ GAUGE
• 3/4" FEMALE NPT INLET X 3/4" FEMALE NPT OUTLET
• 250 PSI MAX INPUT PRESSURE 215 PSI MAX OUTPUT PRESSURE
• REGULATOR WILL REGULATE AIR PRESSURE BETWEEN 7 - 225 PSI
• METAL BOWL AND VISIBLE SIGHT GLASS

• 3/8" NPT Piggyback Filter Regulator Lubricator Unit
• Operating Pressure: 0-145 PSI
• 5 Micron Brass Filter Element, Excellent Filtering Performance, Much Longer Life and Reuse Feasibility
• Flow Rate: 60 SCFM (1700 L /Minute)@ 90 psi
• Includes Semi-Auto Drain & Polycarbonate Bowl with Metal Guard, 0-150 Gauge & Bracket，a pair of Air Coupler＆ Plug Kit, 2 x 3/8" NPT Fittings, 1 x Thread Seal Tape

User questions & answers

Question:	What is the small blue filter for & were does it go
Answer:	That's teflon tape to seal the pipe threads
Question:	what thread is the gauge? I ordered 2 units and they did not come with the gauge
Answer:	I ordered the one with 1/4" NPT gauge.
Question:	Can the oiler be bypassed when using a paint sprayer? Dont want oil in my paint
Answer:	I keep the Oiler clean and spray that way. Add coupla drop oil into tool each time I use it
Question:	can the units be swapped so the dryer is on the right and oil on the left and the air supply would come from the right and exit to the left
Answer:	Yes I did but it leakes don't buy it

Product features

NANPU 3/8" NPT Air Filter, Regulator & Lubricator (FRL) Combo

The Filter, Regulator＆Lubricator is three part system. The filter is designed to remove most liquid and solid particles from the air supply. The Self-Relieving Pressure Regulator is used to adjust the outlet pressure. The lubricator provide oil to the air tool and increase the life of the tool.

Brand Package ＆ Foam Box

The original packaging and foam box give the product better protection, prevent any damage that may have occurred during transit.

Accessories

Air Coupler＆ Plug Kit, Thread Seal Tape and Fittings as additional accessories to bring more convenience to your installation.

User's Manual

For more details about this product, please refer to the user‘s manual.

Preparation

The assembly of all calibration shall meet the maximum flow requirement.

Please clean the port and fitting before installation, it will effectively avoid bring dust to the air path.

Pay attention to direction of air flow and arrow pointing on product body if correct, minding port and thread size if match.

Pressure Adjustment

Pull up the knob of pressure gauge, rotate:

If you do clockwise rotation, pressure will rise steadily.Pressure will down when you rotate counterclockwise.

Stop turning after reaching the required index and lock down the knob,forget this step you may face leakage problem.

Dial Reading

Make sure that the pressure gauge is tightly installed on the main body, and pay attention to whether the reading rises and falls smoothly while adjusting pressure.

Drainage

Drainage column will automatic excrete if there is no pressure,and it will close during the air flow passing. When the water level is beyond upper limit, drainage is necessary, otherwise that will cause poor dehumidification.

Oil Adjustment

Rotate the needle valve in the “+” direction to increase the oil absorption speed, and it will slow down or stop when you rotate to “-” direction.

Refueling

Rotates refueling screw clockwise, oil you add should not exceed 80% of bowl. After refueling, please tighten the refueling screw.

TECHNOLOGY CHANEGS LIFE & TECHNOLOGY CHANGED BY NANPU

NANPU - Dedicate to F. R. L

After more than 30 years of development, NANPU Pneumatic has a professional air power system design and production team to provide customers with high quality and services. Since clean air is indispensable part in many fields of industry for all kinds of equipment and tools, NANPU F.R.L (Air Filter, Air Regulator, Air Lubricator and their combinations) can make your air supply safer and more efficient. We provide customized products and services for your differentiated needs.

Product description

1/2" Compressed Air Tool In-Line Oiler / Lubricator Inline Oil Lubrication New

• 1/2" Compressed Air Tool In-Line Oiler / Lubricator Inline Oil Lubrication New

User questions & answers

Question:	Is it adjustable
Answer:	No, it is not.
Question:	Does it leave oil in the air line after use? I was planning to add a valve to bypass it and use clean air (painting, tires, etc
Answer:	I have been using it for six months. I have not noticed any excess oil in lines or venting out when depressurizing the lines. I do have it in the air lines behind the two air connectors I use mostly for wood work especially painting. I hope that helps.
Question:	Does it come with the mounting bracket
Answer:	Yes
Question:	I ordered 3 of these. in one the outside cup is cracked. i need part l8016 (outside cup) and prl8017 ( o ring) how do i get these
Answer:	Send us a message. We have never heard of the outside bowls being cracked on any of these units. Perhaps there was damage in transit? We can send out a replacement. Also we do have the O rings in stock, but do not have them online at this time. We can send one out to you along with the replacement bowl, no problem

Product description

1/2 Inch NPT Air Filter Regulator



Size: 1/2 inch NPT

Body Material: Aluminum

Operating Temperature Range: 40-140°F(5-60℃)



Precautions:



- Before Installing the Fittings, Please Wrap the Teflon Tape Around the Fititings to Avoid Air Leakage.



- There May Be Leakage During the First Installation (the Internal Pressure is Different from the External Pressure at the Beginning, and Excess Pressure Will Be Discharged, Please Wait Patiently, After Exhausting Excess Air, No Leakage Will Occur)



Feature:



1.Simple Pressure Adjustment Method, Accurate Pressure Regulation.



2.The Overall Modular Design Can Be Arbitrarily Disassembled, Combined, Easy to Use, Easy to Load and Unload, and Can Meet the Various Requirements of Different Pneumatic Systems.



3.The Product Has Intimate Dust Plugs to Prevent Dust and Other Impurities from Entering the Body to Affect the Filtering Effect.



4.Filtration：effectively Filter Moisture and Tiny Particles in the Air.



5.Pressure Regulation: Adjust Different Levels of Pressure According to Demand.



Notice:



Please Observe the Bottom of the Product, Use the Installation Exactly in the Direction of the Arrow.



Please use a wrench to tighten fittings to avoid leakage.



Working Pressure is 145psi.

• Size - Auto Drain, Port Size: 1/2" NPT, Pressure Gauge Size: 1/4" NPT
• Material - Body Material: Aluminum. Filter Element：fiber
• Feature - Max. Supply Pressure: 250 PSI/ Max. Operating Pressure: 0-145 PSI. Temperature Range: 40-140℉
• Function - The filter is designed to remove most liquid and solid particles from the air supply.
• Include - 1x Air Filter, 1 x Air Regulator, 1x Air Pressure Gauge, 1 x Thread Seal Tape, 2 x 1/2" NPT Brass Nipple.

• 1/2" NPT Piggyback Filter-Regulator-Lubricator Unit
• Max Supply Pressure:230 psi
• Operating Pressure Range: 0-180 psi
• 5 Micron Brass Filter Element, Flow Rate:92 SCFM; Temperature Range:41-140℉
• Includes Semi-Auto Drain & Polycarbonate Bowl with Metal Guard, 0-230 psi Gauge & Bracket, 2 x Bracket, 4 x Screws, 1 x Instruction Manual.

Product features

NANPU High Pressure Compressed Air Filter Regulator Lubricator Combo, Water/Oil Trap Separator - Gauge(0-230 psi), Poly Bowl, Semi-Auto Drain, Bracket

NANPU High-Pressure Air Filter Regulator Lubricator provides a safer and more effective drying solution for your pneumatic equipment, efficiently filter out moisture and particles in the air. More rigorous structural design to prevent air leakage. Use for any compressor, air tank, spray gun, or air system to precisely regulate and maintain constant air pressure to your tools and equipment. The lubricator lubricate your pneumatic tools with air to improve the efficiency of the equipment and prolong the service life of the equipment.

Brand Package ＆ Foam Box

The original packaging and foam box give the product better protection, prevent any damage that may have occurred during transit.

Accessories

Thread Seal Tape, and Fittings as additional accessories to bring more convenience to your installation.

User's Manual

For more details about this product, please refer to the user‘s manual.

Preparation

The assembly of all calibration shall meet the maximum flow requirement.

Please clean the port and fitting before installation, it will effectively avoid bringing dust to the air path.

Pay attention to the direction of airflow and the arrow pointing on product body if correct, minding port and thread size if match.

Pressure Adjustment

Pull up the knob of the pressure gauge, rotate:

If you do clockwise rotation, the pressure will rise steadily. Pressure will down when you rotate counterclockwise.

Stop turning after reaching the required index and lock down the knob,forget this step you may face leakage problem.

Dial Reading

Make sure that the pressure gauge is tightly installed on the main body and pay attention to whether the reading rises and falls smoothly while adjusting pressure.

Manual Drainage

The high-strength zinc alloy body＆guard makes the product more stable, safer, and longer service life during use.

Using manual drainage, you can manually drain the water in the filter cup, easy to operate. When the water level is beyond the upper limit, drainage is necessary, otherwise that will cause poor dehumidification.

Oil Adjustment

Rotate the needle valve in the “+” direction to increase the oil absorption speed, and it will slow down or stop when you rotate to the “-” direction.

Refueling

Rotates refueling screw clockwise, the oil you add should not exceed 80% of the bowl. After refueling, please tighten the refueling screw.

TECHNOLOGY CHANEGS LIFE & TECHNOLOGY CHANGED BY NANPU

NANPU - Dedicate to F. R. L

After more than 30 years of development, NANPU Pneumatic has a professional air power system design and production team to provide customers with high quality and services. Since clean air is indispensable part in many fields of industry for all kinds of equipment and tools, NANPU F.R.L (Air Filter, Air Regulator, Air Lubricator and their combinations) can make your air supply safer and more efficient. We provide customized products and services for your differentiated needs.

Product description

ARO-Flo 1000 Series Filter Regulator Lubricator

-1/4" NPT Port

-5 Micron Filtration

-150 psig Max inlet Pressure

-0-140 psig Regulator Pressure Range

-Flush Mount Pressure Gauge

-23-125°F Temperature Range

-Polycarbonate Bowl w/ guard

-Manual Drain

From the Manufacturer

ARO-Flo Filter, regulator, Lubricators, and piggybacks can be combined together to form combinations. They are typically strung together in the F+R+L arrangement, although other configurations are also used depending on application needs. ARO-Flo combination FRLs are easily assembled using modular spacer kits.

• 1/4-Inch NPT
• P39124-600 Piggyback Filter/Regulator and L36121-100 Lubricator
• Manual drain and polycarbonate bows
• Relieving with gauge
• 44 CFM

User questions & answers

Question:	Hi, can this combo unit be re-configure? if yes, any special tools, or parts i need? i m using this on a tire machine, i need to add a t in between
Answer:	Yes. You may want to try to buy another mounting block if in a commercial or industrial setting.
Question:	What is the maximum supply air psi to the regulator
Answer:	This Ingersoll Rand air system has a maximum incoming pressure of 150 PSI.
Question:	What type of oil for the oiler bowl and where do you pour it? How can you tell if your tools get oiled, is there a adjuster for the oil
Answer:	Do not put air compressor oil in the bowl. Use air tool oil only. There is a difference. The bowl can be unlocked by pushing down on the little black tab at the top of the gown while pushing up on the bowl and turning clockwise about 1/8 turn until the arrow at the top of the bowl aligns with the unlock symbol. It is a little stuff generally due to the oring inside. Depressurize completely first. Do not try to remove the bowl under pressure. The oiler on mine has a clear sight glass bubble at the top and if you watch it while you are running a tool at no load you should be able to see a drop forming and falling inside the sight glass bubble. You can adjust by turning the sight glass in the direction of the + or - on top to achieve more or less oil. I like about 1 drop every 5 seconds for my air tools.
Question:	when using this unit is a water filter needed?....I am not clear if the oil unit is also a water separator
Answer:	The air coming from the compressor goes in on the left as you are facing it. It goes into the combination regulator/filter/water separator unit first and passes to the right-side unit which is the lubricator. It then passes out to your tool line on the right-hand side.

Product features

Ingersoll Rand ARO, ARO-FLO Series (FRL) Filter-Regulators-Lubricator Combinations

Filters, regulators, lubricators, and piggybacks can be combined together to form combinations. They are typically strung together in the F+R+L arrangement (three-piece combo) and F/R+L (two-piece combo) arrangement, although other configurations are also used depending on application needs. ARO-Flo combination FRLs are easily assembled using modular spacer kits. Panel nuts not included with units and must be ordered separately.

Tools and Equipment Operation at Peak Performance

Simply put, air flows efficiently through ARO-Flo filters, regulators, and lubricators. This means less air is choked during the air preparation process, and your equipment can perform at its peak performance.

ARL-Flo Series FRL's

Clean, optimally regulated air is a key ingredient that enables effective and efficient operation of tools, equipment, and machinery in almost every industry. As such, the use of air preparation devices, such as filters, regulators, and lubricators is an excellent means of keeping your air supply in top condition, as well as enabling your tools and equipment to operate at their peak performance.

About ARO Ingersoll Rand

For more than 100 years, Ingersoll Rand ARO has been the business of the design and manufacture of compressors, pneumatic tools, and air preparation equipment. Clean air is a key ingredient that enables effective and efficient operation of tools, equipment, and machinery in almost every industry. As such, the use of air preparation devices, such as filters, regulators, and lubricators (FRLs) is an excellent means of keeping your air supply in top condition, as well as enabling your tools and equipment to operate at their peak performance. The ARO-Flo Series FRLs continue the tradition of offering premium products for your operation, and raises the bar in the industry for safety, flow performance, and modularity.

Product description

Pneumatic Plus SAL Series Air Lubricators are designed to keep your airline and air tools properly lubricated all times to maintain peak performance. SAL Series Lubricators will deliver a constant ratio of oil to airflow. Adjustment knob will allow you to set proper oil drip rate. SAL Series Lubricators can be connected to SAR Series Regulators and/or SAF Series Particulate Filters to complete a full Filter Regulator Lubricator unit.

Product description

Air line lubricators are devices used to add a lubricant, via an air line, to a compressed air operated appliance; one that requires an external source of pneumatic oil for proper operation. Oilers/Lubricators help protect and prolong the life of your compressor tools and accessories

• New 1/4" Mini Lubricator OILER
• ---------Free Shipping------
• 150 PSI Max input pressure - 52 CFM Flow Rate
• Wall Mounting bracket included - Drain Capacity 15ml -Oil Capacity 30ml
• THIS ITEM IS DESIGNED TO EXTEND THE LIFE OF YOUR AIR TOOLS