14 best armstrong wrench
An Armstrong wrench is a type of hand tool used in various mechanical and automotive applications. Armstrong is a well-known brand that produces a wide range of hand tools, including combination wrenches. Here is some information about Armstrong wrenches and their typical features:
Combination Wrench: An Armstrong wrench is often a combination wrench, which means it has a box-end on one side and an open-end on the other. This design allows you to tackle a variety of fasteners and bolts with different types of heads.
Materials: Armstrong wrenches are typically made from high-quality materials, such as alloy steel.This ensures durability and strength, making them suitable for heavy-duty applications.
Precision Engineering: Armstrong is known for its precision engineering and craftsmanship. Wrenches are designed to exacting standards to provide a tight fit and reduce the risk of slipping or rounding off fasteners.
Corrosion Resistance: Some Armstrong wrenches may feature a corrosion-resistant finish or coating, such as chrome plating, to protect the tool and enhance its longevity.
Sizing: Armstrong wrenches come in various sizes to accommodate different bolt and fastener sizes. The sizes are often marked on the wrench for easy identification.
Versatility: Combination wrenches like those produced by Armstrong are versatile tools suitable for a wide range of applications, including automotive repair, general maintenance, and construction tasks.
Ease of Use: The design of Armstrong combination wrenches allows for easy maneuverability in tight spaces. The open-end is often at a slight angle, making it easier to access fasteners in confined areas.
Quality Assurance: Armstrong is known for its commitment to quality and may offer warranties on its hand tools to ensure customer satisfaction.
It's important to choose the right size and type of Armstrong wrench for your specific task to ensure proper engagement with fasteners and to prevent damage to both the tool and the fastener. Additionally, like all hand tools, proper care and maintenance, such as keeping the wrench clean and storing it in a dry place, can help extend its lifespan.
Armstrong is a reputable brand in the hand tool industry, and their wrenches are widely used by professionals and enthusiasts alike for their reliability and durability in various mechanical and maintenance tasks.
Below you can find our editor's choice of the best armstrong wrench on the market
Wright Tool 952 Full Polish Metric 12 Point Combination Wrench Set, 7mm-22mm (15-Piece)
Wright Tool
Product description
Since 1927, the Wright Tool Company has manufactured top quality hand tools. The use of Wright Alloy Steel, precision heat treating and advanced manufacturing techniques results in products of long life, durability and toughness. All Wright Tool products are designed to meet or exceed the applicable ASME Standards for each particular tool.
From the Manufacturer
Get a good grip with the Wright Tool 15 piece 12 point full polish metric combination set. Wrenches are included in 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, and 22mm.
- 15 Piece set
- More torque, longer life, higher strength
- More metal in high stress areas to stiffen jaws
- Denim tool roll included
- 12 Point design full polish combination wrenches
- 15 pieces
- More torque, longer life, higher strength
User questions & answers
| Question: | Does this set contain the new wright grip 2.0 wrenches |
| Answer: | Yes. This are excellent quality hand tools. I have been using Wright products for years and they simply feel better in the hand. |
| Question: | Are these the "Wright Grip" version |
| Answer: | Yes they are. Very nice set. |
| Question: | is this set the wrightgrip 2.0 updated version? Thank you |
| Answer: | yes, the set I got is marked 2.0. I must say it is the most beautiful set of wrenches I've ever seen or owned (though the larger wrenches are really large). |
| Question: | If these wrenches are made in the usa, why does is say origin: china for the listing |
| Answer: | That is most certainly a mistake on Amazon's part. They are 100% made in the USA. |
Proto J6012C 3/8" Drive Ratcheting Head Micrometer Torque Wrench,20-100-FT LB
Proto
Product description
Stanley J6012C Proto 3/8-inch Drive Ratcheting Head Micrometer Torque Wrench 20-100 ft-lbs Calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise at 20% to 100% of full scale. Calibration is accomplished by manual loading the torque wrenches. Manufactured to meet standard industrial torque applications, general industry, heavy equipment and maintenance.
- Calibrated to +/- 4% clockwise direction and +/- 6% counter clockwise at 20% to 100% of full scale.
- Calibration is accomplished by manual loading the torque wrenches
- Manufactured to meet standard industrial torque applications, general industry, heavy equipment, and maintenance
- Made in USA
User questions & answers
| Question: | How long is this torque wrench |
| Answer: | 17". |
| Question: | Does it come with a calibration certificate |
| Answer: | yes |
| Question: | Does it come with the storage case |
| Answer: | Yes |
| Question: | Is this wrench click style? and does it measue in foot pound or inch pound |
| Answer: | Very nice torque. it is a click style and measures foot pounds. I've been in the auto industry for many years and the quality is just as good as a MAC or MATCO wrench but without the heavy price tag. |
Proto J795S 3-piece Black Oxide Adjustable Wrench Set
Proto
Product description
Stanley Proto 3-piece Black Oxide Adjustable Wrench Set. Non-reflective black oxide finish for use where non-plated products are required.
- Non-reflective black oxide finish for use where non-plated products are required
- Extra wide jaw capacity
- Square jaw opening provides strength and tight fit
- Stanley Proto - J795S
- Made in USA
User questions & answers
| Question: | What Sizes are say I'm having trouble finding it in the description |
| Answer: | 8" or 200MM / 10" or 250MM / 12" or 300MM |
| Question: | Do these wrenches have measurement markings on the bottom of the jaw? If so, are they standard, metric, or both |
| Answer: | No measurement markings |
| Question: | What length are these adjustable wrenches |
| Answer: | 8", 10", and 12" |
| Question: | Made in the USA |
| Answer: | Proto USA... |
Armstrong 64-0321/4" Drive Micrometer Torque Wrench (30 in/
Armstrong
Product description
Made in the USA - quality and availability. Innovative linear ball bearing design mechanism for improved performance; 1) eliminates friction between spring and case for greater accuracy, 2) eliminates speed sensitivity errors, and 3) produces a. Twist detent locking ring allows easy setting of desired pre-set torque and prevents accidental Change of the torque setting while in use..
- Made in the USA - quality and availability
- Innovative linear ball bearing design mechanism for improved performance; 1) eliminates friction between spring and case for greater accuracy, 2) eliminates speed sensitivity errors, and 3) produces a
- Twist detent locking ring allows easy setting of desired pre-set torque and prevents accidental change of the torque setting while in use
Proto JC497 Adjustable Pin Spanner Wrench 2" to 4-3/4", 1/4" Pin
Proto
Product description
Stanley JC497 Proto Adjustable Pin Spanner Wrench 2-inch to 4-3/4-inch, 1/4-inch Pin Non-reflective black oxide finish for use where non-plated products are required. Precision machined pins provide engagement with side holes or slots. Used to tighten side slot nuts on collars, lock nuts and bearings.
- Non-reflective black oxide finish for use where non-plated products are required
- Precision machined pins provide engagement with side holes or slots
- Used to tighten side slot nuts on collars, lock nuts and bearings
- Made in USA
User questions & answers
| Question: | Do you have these sizes? 3/4 to 2",5/4" to 3", 2" to 19/4", 9/2" to |
| Answer: | Here are the part #'s for the items you are looking for: 3/4 to 2" is JC491, 1-1/4 to 3" is JC494, 2 to 4-3/4" is JC497 and 4-1/2 to 6-1/4" is JC499. They are available online. |
GEARWRENCH 14 Pc. 6 Pt. Combination Wrench Set, Metric - 81925
GEARWRENCH
Product description
GearWrench introduced the original patented five-degree ratcheting wrench in 1996 and quickly became a go-to brand for professional automotive technicians. The innovation didn't stop there. Year after year, the GearWrench brand continues to expand its line-in ratcheting tools and beyond-to help automotive and industrial technicians get their jobs done faster and easier. Includes sizes: 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm & 19mm.
- Offset Box End for Increased Access
- Surface Drive Plus on Open End: Stronger Grip, Reduces Fastener Rounding
- Up to 25% More Torque
- Includes sizes: 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm & 19mm.
User questions & answers
| Question: | Does the set include a wrench roll nowadays (2020)? Thanks |
| Answer: | my order came with a pouch with a place for each wrench |
| Question: | Do they make this same set but in 12 point |
| Answer: | Yes, GW makes an expanded SAE/Metric set of 44 pieces in 12 point long pattern wrenches, includes up to the 1 1/2 inch wrench and up to 32 mm wrench, I must say it's complete. |
| Question: | How many pieces in the kit? title says 14, the description lists 14 sizes (6mm-19mm), but the options are for 28 piece sae&metric or 10 piece metric |
| Answer: | 14 pc |
| Question: | What wrenches are included in this set |
| Answer: | 15/16, 11/32, 3/8, 7/16, , 9/16, 5/8, 11/16, , 13/16, 7/8, 15/16, 1, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mmI believe they also came with a wrench holder for each, that is, one for SAE and one for metric |
Product features
6 Point Combination Wrenches
- 6 Point box end design for a secure fit on hex fasteners (versus a 12pt on universal box end design)
- 6 Point off-corner loading design has a more secure fit on the sides of fasteners to prevent stripping corners of a hex fastener
- Professional’s choice regular pattern length for maximum access to more fasteners
- 15° offset for better access in tight spaces
- Size conveniently stamped on the head and beam for quick identification
- Manufactured from alloy steel for better strength and longer tool life
- Bright, full polish chrome finish wipes easily clean to resist rust and corrosion
Stanley Proto J706S Black Oxide Adj Wrench, 6"
Proto
Product description
Stanley J706S Proto Black Oxide Adjustable Wrench 6-inch Non-reflective black oxide finish for use where non-plated products are required. Extra wide jaw capacity. Square jaw opening provides strength and tight fit.
- Non-reflective black oxide finish for use where non-plated products are required
- Extra wide jaw capacity
- Square jaw opening provides strength and tight fit
- Made in USA
User questions & answers
| Question: | where is it made |
| Answer: | Says USA on handle. |
| Question: | Is this wrench rust proof/resistant |
| Answer: | I carry it in a tool pouch. It gets wet a lot, but it is constantly covered in grease and hydraulic oil. So, Maybe? |
| Question: | What does it open to |
| Answer: | Opening Size: 15/16 in Max |
Stanley Proto J708 Satin Adj Wrench, 8"
Proto
Product description
Stanley J708 Proto Satin Adjustable Wrench 8-inch Satin finish provides corrosion resistance and a slip resistant grip. Extra wide jaw capacity. Square jaw opening provides strength and tight fit. Rugged I-beam style handle and reinforced stress areas; radius corner design.
- Satin finish provides corrosion resistance and a slip resistant grip
- Extra wide jaw capacity
- Square jaw opening provides strength and tight fit
- Rugged I-beam style handle and reinforced stress areas; radius corner design
- Made in USA
User questions & answers
| Question: | The picture is of a 4 inch is this an 8 ill be buying |
| Answer: | A j708 is an 8 inch wrench |
| Question: | Is this wrench made in the U.S.A.? (As opposed to most of the "Hecho en Espana" --or China!-- wrenches |
| Answer: | Yes! Made in USA |
24pc IN/MM TIGHTSPOT Ratcheting Wrench Set - MASTER SET Including Inch & Metric With Quick Access Wrench Organizer - Our standard in combination wrench sets from gear to tip
Jaeger
Product description
Is It Possible For A Wrench Built For Tight Spaces To Be Agile And Fast In Any Situation?
Faster In Tight Spaces Than Our Standard Wrench
Our extra precise ratcheting wrench is faster to use in tight spaces than a standard wrench, because it allows you to have continuous engaged with the bolt while you tighten it. Reseating bolts in tight, dark spaces kills your productivity. In our tests, we have seen huge speed improvements in tight spaces over our standard wrench. We couldn't be happier!
Prevent Stripping Bolts!
Another downside of reseating bolts over and over, is it can round out and destroy the bolt head. Once the bolt head has been rounded and you aren't finished, your project goes on hold until you can fix or replace the bolt. This can take hours!
Additionally, our contact points are designed to quickly grip critical areas of the fastener to support maximum force transfer while preventing rounding.
Our Strongest Steel Ever!
To make our drop forged tool even stronger, we added the best strengthening agent for steel: vanadium! And if you want numbers, our hardened steel is 67% percent stronger than other steels.
Our TightSpot Wrench is Perfect For:
- Electricians
- Technicians
- Home Projects
- Lawn Care Equipment
Dare To Compare! Go ahead and compare the Jaeger Tools ratcheting wrench to any other on the market. Once their wrench bruises your knuckles or wear out quickly, feel free to come back and use the Jaeger Tools ratcheting wrench. However, your knuckles would prefer it if you'd be kind and order a safe, durable and comfortable ratcheting wrench now.
- 24 piece Master Set sizes: 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 7/8" & 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm,16mm, 17mm, 18mm, 19mm
- Quick access wrench organizer: Avoid messy rollup bags just to get 1 wrench out! Not to mention the painstaking time it takes to organize, and perfectly roll up. Our wrench organizer almost magically cuts this time down to seconds.
- Our ultimate TightSpot wrench to work faster in small spaces: Our incredibly priced, 5 degree ratcheting movement is designed to access spots where standard wrenches will not have enough swing. The 72 teeth inside the 100% steel ratcheting box end will speeds you through jobs quickly with no need to lift. And without lifting, you stay glued to the fastener until the turning is done, even if you're reaching deep into a compartment or appliance.
- Powerful 7 stage construction for lifelong reliability: Our secret is drop forging & heat treating our amazing steel alloy. Aerospace Grade Vanadium hardens our steel alloy even more, while chromium helps to prevent corrosion.
- Reduce bolt rounding: The reinforced open end holds on tight to fasteners for reduced bolt rounding.
- Guaranteed forever: If, for whatever reason, you don't absolutely love your Jaeger Tools ratcheting wrench, just return it, and we'll refund every penny (Or replace it, if there is a problem).
- Habitat for Humanity donor: When you build your dreams with us, it enables us to build other's dreams.
User questions & answers
| Question: | Why do you advertise as a "complete" set but skip |
| Answer: | A 13/16" is equivalent to a 21mm. The reason the standard set only goes to 3/4" is the same reason the metric set only goes to 19mm. That is traditionally where basic wrench sets (12 pc each) like this top out at. |
| Question: | Is there a warranty on these wrenches |
| Answer: | Great question! We have a lifetime warranty on all our ratcheting wrench sets and individually purchased ratcheting wrenches. If you ever have issues with our tools, just contact us at [email protected] |
| Question: | Are you going to sell other sizes of this wrench? I am a camera technician and I need this in 1/2, 3/4, and 1" sizes for my camera rigs |
| Answer: | Yes we are! We plan on releasing the most popular SAE sizes individually and in a set soon. |
| Question: | Are they wrenches made in the usa |
| Answer: | Great question!We founded Jaeger Tools after 4 generations of owning a factory in Georgia, USA. We hated buying cheap imported tools that broke after a few years in our factory. So we decided to use our contacts to design the wrenches in the US, and then have them manufactured. Turns out, there are only a few factories in the world that met our manufacturing specifications, and they were located in China and Taiwan. Now we use these 2 asian companies solely to manufacture all our tools. - Lee |
Best Value 24-Piece Master Combination Wrench Set with Roll-up Storage Pouch | SAE 1/4” to 1” & Metric 8mm to 24mm
EFFICERE
Product description
EFFICERE 24-Piece Master Combination Wrench Set contains a versatile selection of the most commonly used sizes, in both Standard Inch and Metric, and is stored in a canvas roll-up pouch for easy organization and convenient storage. It is your perfect choice at home, garage, shop, college dormitory and other job sites to accomplish your projects, maintenance and repairs. Made from forged and heat-treated chrome vanadium steel, these wrenches are built to perform. The open ends are angled 15 degrees, allowing you to reach and turn fasteners in tight spaces. The box ends offer the dual benefit of a 12-point configuration that needs only half the entry angle of 6-point) and a 15-degree offset design that saves your knuckles. All the wrenches meet or exceed ANSI standards. Set includes: 12-pc SAE sizes 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 1”; 12-pc Metric sizes 8mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 17mm, 18mm, 19mm, 21mm, 24mm.
- PREMIUM MATERIAL: constructed from high strength drop forged and heat treated chrome vanadium steel
- DURABLE FINISH: corrosion and rust resistant chrome plating finish for durability and extended tool life
- EASY TO USE: precisely manufactured 12-point offset box end and 15-degree angled open end for easy access to fasteners in tight spaces
- MORE TORQUE: raised panel wrench design provides more leverage and gripping power
- POPULAR SIZE COVERAGE: set comes with a heavy duty storage pouch and includes 24 pieces high quality wrenches that exceed ANSI standard: SAE 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 1 in. and Metric 8, 10, 11, 12, 13, 14, 15, 17, 18, 19, 21, 24 mm
User questions & answers
| Question: | How is quality of pouch |
| Answer: | Product was given as a gift, I have not seen the pouch. |
| Question: | Are these tools gauranted for life |
| Answer: | I really doubt it, they are only $20 for a whole new set. |
| Question: | Do you sell just the roll-up mat/organizer |
| Answer: | Bought wrenches and it came with the roll up. I'm sure the vendow will answer your question although I doubt they will just sell the sleeve for the wrenches it's worth trying. Good luck |
| Question: | Judging from the photos, these definitely appear to be constructed of pot metal....any input here? Thanks |
| Answer: | Definitely not pot metal. They are made of chrome vanadium steel, very strong. These look like knock offs of Craftsman. They lack the full polish which can make them a little harder to clean, but they slip less in your hand as well. |
Sunex 3580, 3/8 Inch Drive Master Impact Socket Set, 80 Piece, SAE/Metric, 5/16 Inch - 3/4 Inch, 8mm - 19mm, Standard/Deep/Universal, Cr-Mo, Radius Corner, Chamfered Opening, Dual Size Markings, Heavy Duty Storage Case, Includes Star and Inverted Star Soc
Sunex Tools
Product description
Sunex 3580, 3/8 Inch Drive Master Impact Socket Set, 80 Pieces, SAE/Metric, 5/16 Inch - 3/4 Inch, 8mm to 19mm, Standard/Deep/Universal, Cr-Mo Steel, Radius Corner Design, Chamfered Opening, Dual Size Markings, Heavy Duty Storage Case, Meets ANSI Standards, Includes Star and Inverted Star Sockets, 4 Extensions, Universal Joint.
SET INCLUDES:
SAE:
Standard Sockets: 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”
Deep Sockets: 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”
Universal Sockets: 11/16”, 3/4”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”
METRIC:
(12) Standard Sockets: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm
(12) Deep Sockets: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm
(10) Universal Sockets: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm
OTHERS:
Inverted Star Sockets: E5, E6, E7, E8, E10, E11, E12, E14, E16
Star Sockets: T20, T25, T27, T30, T40, T45, T47, T50, T55
Universal Joint
- LIFETIME WARRANTY WITH SUNEXPRESS: Get in the express lane with the industry’s leading warranty program and exchange warranted products directly with Sunex.
- CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
- RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
- CHAMFERED OPENING: Quickly aligns fastener to socket.
- DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification.
- HEAVY DUTY STORAGE CASE: Convenient impact socket transport and storage.
- MEETS ANSI STANDARDS: All sockets are rigorously tested, ensuring peak performance and durability.
User questions & answers
| Question: | For those who purchased this item since February 2017, has the case been updated to black clasps and a pinned hinged as Sunex's other socket sets |
| Answer: | Mine arrived 10/4/2018. Clasps are black, the hinge is thin plastic. |
| Question: | The kit says internal star, is this correct or are they actually torx |
| Answer: | This kit contains torx. It's a great kit. Has all your swivel sockets, deep and shallow sockets and extensions. The socket sizes are etched as well as stamped. Wall thickness on sockets not too thick and fit tight spaces |
| Question: | Does it come with impact shank |
| Answer: | This set is well beyond an impact driver this is the set you get when you have the high torque 700 plus ft lbs on 3/8 or 1/2 in drive. Of course you can get a 1/4 hex shank and use these with an impact driver in just saying it's way overkill for the amount of torque a driver produces. |
| Question: | Where would i go to get replacement sockets. my kit came with 2 e14 and 2 1/2 swivel sockets. i’m missing the e12 and 7/16 swivel sockets |
| Answer: | You can order though Amazon |
Williams MWS-12RC 12-Piece Metric Reversible Ratcheting Combination Wrench Set
Williams
Product description
Snap-on Industrial Brand JH Williams 12-Piece metric reversible ratcheting combination wrench set has a high polished chrome finish that cleans easily. There is a ratchet lever that is easily accessible for quick direction changes and there are recessed corners in ends that provide extra turning power. The size range is 8 to 19 millimeters.
- 12-Piece set
- High polished chrome finish
- Ratchet lever is easily accessible for quick direction changes
- Recessed corners in ends provide extra turning power
- Size ranges from 8 to 19 millimeters
User questions & answers
| Question: | where do you warranty the tools |
| Answer: | Have not had to warranty any but would look under the JH Williams website for info. |
| Question: | do these wrenches have a 15 degree offset on the box end |
| Answer: | Yes, these wrenches have a 15 degree offset on the box end. |
| Question: | why does the sae version come with only 8 & the metric comes with |
| Answer: | Williams is simply filling each set with common sizes for the sets respective measurement system.Long Version:Each set is filled with "common" respective sizes. 10-19mm is what is often considered the standard for small metric wrench sets. SAE sets are fractionally based, and the number of total "common" SAE sizes are fewer. Using a VERY rough conversion, the SAE contains: 8, 10, 12, 13, 14, 16, 17, 19mm. |
| Question: | Is this set from China or Taiwan |
| Answer: | Sets are made in Taiwan. |
Armstrong 25-222 12 Point 11/16-Inch Full Polish Long Pattern Combination Wrench
Product description
069-25-222 Features: -Removes even worn fasteners. -Precision broached openings. -''Lobular'' design exerts force on flats of fasteners. -Heat-treated to ensure correct hardness and spring. Use: -Combination Wrench. Size: -1/2"/11/16"/3/4"/3/8"/5/8"/7/16"/7/8". Quantity: -Set. Number of Points: -6/12. Measurement Type: -SAE. Product Type: -Wrenches. Dimensions: Overall Product Weight: -0.34 Pounds.
- Armstrong 11/16" 12 Point Full Polish Finish Long Combination Wrench
User questions & answers
| Question: | Is this a 11/16 as said or a 5/8 like in the picture |
| Answer: | It was 11/16" |
[26 Pieces] Ratcheting Wrench Set | Unbreakable INCH + MM
ToolGuards
- Chrome Vanadium Steel
- ✅ 26 PIECES RATCHETING WRENCH SET with mirror finish includes INCH and MM combination wrenches. Speed up the work with this master set which is larger and more versatile than other sets.
- ✅ SLIM PROFILE & EXTREMELY STRONG CHROME VANADIUM STEEL. The 72-tooth ratchet gears need only a 5-degree working swing arc. Full-drive box ends deliver reliable torque to tighten or loosen any bolt without rounding.
- ✅ 13 METRIC + 13 INCH WRENCHES includes 6mm, 7mm, 8mm, 9mm, 10mm, 11mm 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm and 1/4″, 9/32″, 5/16″, 11/32″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 11/16″, 3/4, 13/16″, 7/8″.
- ✅ GET BONUS TOOL ROLL WHEN YOU BUY TODAY for protection and storage of your 22 pc wrenches. The tool roll case has each wrench size printed which makes organizing easy. Add this premium quality set to your box today!
- ✅ LIFETIME WARRANTY insures your ToolGuards Wrenches purchase against manufacturer defects.
User questions & answers
| Question: | mm is 0.4331" ; 7/16" is 0.4375" . The difference is 0.0044" . Would the 7/16 th have a significant impact on a 11mm bolt or nut |
| Answer: | 11mm - 7/16in, 8mm - 5/16in and 16mm - 5/8in ARE close enough for normal use. If you have any extremely tight bolt/nut, male sure you use tje appropriate size tool. 11mm is NOT commonly considered a duplicate, wjere the other 2 are. Do not try 13mm or 14mm in place of 1/2in or 9/16in, as they are not close enough...even though commonly refer to them as *same size* |
| Question: | Hello are replacement Organizer Pouch available |
| Answer: | Hello, We currently don't sell a replacement for the free ToolGuards Tool Roll. |
| Question: | Does the bag come labeled with the sizes of the wrenches |
| Answer: | Pouches are labeled with wrench sizes. Check to ensure that all wrenches in the set match the sizes marked on the pouches. I received two wrenches of the same size necessitating return of the first set. |
| Question: | where are these wrenchs made |
| Answer: | I would say China. But they are very sturdy and work as well as any other wrench I have used. |
Product features
SLIM PROFILE
Have you ever hit a dead end? With increased attention to details, ToolGuards ratcheting wrenches are designed to access into tight spots, nooks, and crannies where standard ratchets will not even dare to approach or glance. Say goodbye to scratched hands or inaccessible nuts/bolts/screws etc. Our high quality and smooth design will never let you down.
TOOL ROLL
Travel as easy and light as possible, with the bonus tool roll. All the keys fit comfy in their snuggly spaces. ToolGuards Tool Roll has a clearly written dimension of each individual wrench key. Say goodbye to disorganized & confusing wrench racks or rigid and heavy travel cases.
Latest Reviews
View all
Chromium Polynicotinate Weight Loss
- Updated: 19.01.2023
- Read reviews
Hot Ash Vacuum Cleaners
- Updated: 28.01.2023
- Read reviews
Tools More Pliers
- Updated: 12.01.2023
- Read reviews
Progressive Popsicle Molds
- Updated: 24.06.2023
- Read reviews
Electric Honey Extractors
- Updated: 06.04.2023
- Read reviews