14 best copper strippers

Product description

Description:

Constructed from solid aircraft grade aluminum alloy, this wire stripper can withstand rigorous environment and last for years to come. Driven by a 180W motor, this stripper is super power yet energy saving. Besides, our wire stripping machine can remove the plastic and rubber insulation from undamaged scrap wire, which can be widely used in automotive wiring harness processing, aerospace wire processing, audio and data line processing, wire recycling dismantling and other industries.



Specification:

Power: 180W

Wire gauge range: 0.06” (1.5mm) ~ 0.98” (25mm)

Motor: 1/4 HP Single Phase Induction Motor, 110V 50-60Hz

Stripping speed: Approx. 50feet per minute

Overall dimensions: 9.4” x 12.6” x 12.6”



Package List:

1 x Wire Stripping Machine

1 x Feeding panel

1 x Instruction Manual

• ALUMINUM ALLOY CONSTRUCTION: Constructed from solid aluminum alloy, this wire stripper can withstand rigorous environments and easily endure years of heavy use.
• EASY OPERATION & WIDE COMPATIBILITY: The electric motor powers drill-driven technology while the adjustable blades and rollers fit all wire sizes with diameters from 0.06” (1.5mm) up to 0.98” (25mm).
• THE CROWN OF COPPER CABLE RECYCLERS: This wire stripping machine removes the plastic and rubber insulation from undamaged scrap wire - a must-have for recycling your copper cable.
• 1/4 HP SINGLE PHASE INDUCTION MOTOR: Motorized to save you time, effort, and money, it creates a fast stripping speed of 50 feet per minute, plus the hands-free design increases safety and convenience.
• PERFECTLY PORTABLE: Measured at 9.4” x 12.6” x 12.6” and weighing only 33 lb, this cable stripper is portable and convenient to move around your workstation.

User questions & answers

Question:	Will it strip CAT5 wire
Answer:	Please note that this machine will strip the wires whose diameter range is from 0.06” (1.5mm) up to 0.98” (25mm).
Question:	were can i get a new wire feed roller? the original is wore smooth
Answer:	Mine was smooth to start with it never had grooves in it
Question:	What is the extra red plug for
Answer:	Sorry, we are not sure which red plug you are talking about. Please contact us using Amazon message system for this question. We will offer further assistance to you in a timely manner. Thank you.
Question:	What sizes a wire will this strip? I seen some other ones that strip 18 gauge to 250 mcm
Answer:	Manufacturers sheet says 1.5mm to 25mm. That roughly translates to 14AWG at the low end, and off the AWG chart at the high end. We used it to strip 6AWG. It did the job. We were stripping lengths under 15'. We ran the pieces of cable through twice, to score both sides of the jacket. It made it much simpler to separate the wire from the jacket.

Product features

The Portable Cable Stripper for Scrap Copper Recycling:

Constructed from solid aerospace-grad aluminum alloy, this wire stripper can withstand rigorous environments and last for years to come. The 180W motor provides sufficient power while saving energy. Removing the plastic and rubber insulation from undamaged scrap wire has never been so effortless. If you reclaim cable for automotive wiring harness processing, aerospace wire processing, audio data line processing, wire recycling dismantling, or other industries the CO-Z Wire Stripping Electric Power Tool has the capacity and convenience to make your job much easier.

WATERPROOF SWITCH:

Waterproof buttons are safe and convenient. The blade will stop cutting immediately when you press the off button.

WIDE COMPATIBILITY:

Different sized feed holes are suitable for wires with diameters from 0.05” (1.5mm) up to 0.98” (25mm).

FAST STRIPPING SPEED:

Heavy-duty gearbox produces a fast stripping speed of 50 feet per minute, improving working efficiency.

ADJUSTABLE SCREW NUT:

You can adjust the height of the blade by turning the screw nut to fit wires of different sizes.

Specifications:

• Power: 180W
• Wire Gauge Range: 0.06” (1.5mm) ~ 0.98” (25mm)
• Motor: 1/4 HP Single Phase Induction Motor, 110V 50-60Hz
• Stripping Speed: Approx. 50 feet per minute
• Overall Dimensions: 9.4” x 12.6” x 12.6”

Product description

Constructed from Solid aircraft grade aluminum – will never bend or distort. All precision machined with 5axis CNC milling technology. Also has built in “ROMEX” adapter: Enables multi-layer wires to be cut in one shot.

• This unique cable stripper is an industrial grade automatic wire stripper for all your scrap wire
• Strips all sizes from 18 gauge wire to 250 MCM, including ROMEX and braided (stranded) wire
• Superior value to any other copper wire stripper. Even includes a free extra blade ($29.99 value)
• This drill powered wire stripping machine is manufactured in North America using top grade materials
• The Romex slot will save an additional 33% of your time over any other wire insulation stripping tool

User questions & answers

Question:	Do you hand crank it
Answer:	For the StripMeister Original you will need to use a corded or wireless drill.
Question:	Does the wire ever slide off
Answer:	Only if the blade is too loose. Once you have it tightened down, the wire will not slide off.
Question:	does it work on #14 thhn wire
Answer:	Short answer is, Yes. If I recall they say itle do down to 18 AWG, buuuut...Long answer is... The smaller the wire more finesse it takes to keep it in the grove and not jump out from under the blade. It makes a difference if its solid or stranded too. I've done alot of #14 on mine but it takes more work than, say #8 or even #10.
Question:	can you buy replacement blades for the stripper
Answer:	I think the seller has the replacement blades for sale also

Product features

Quality Manufacturing

The StripMeister Original wire stripping tool is constructed from solid aircraft grade aluminum and will never bend or distort. All precision machined with 5axis CNC milling technology. Also has built in “ROMEX” adapter: Enables multi-layer wires to be cut in one shot

Huge Capacity Range

Strips all wire sizes from #18 wire to 250 MCM, Diameters from 0.100″ (3mm) up to 0.79″ (20.1mm) including ROMEX and braided (stranded) wire. Strips up to 65 feet per minute.

Essential Components

Blade and feeder are precision machined from heat treated tool steel. Includes spiral groove feeder technology for extremely accurate wire pulling.

Product description

AN INEXPENSIVE HANDY TOOL FOR ANYONE WHO WANTS TO MAKE EXTRA CASH EASILY. -COMPACT DESIGN & LARGE STRIPPING RANGE With all aluminum frame, this machine weights only 2.9 lbs but able to strip wire/cable from Diameters of 0.12″ (3 mm) up to 0.78″ (20 mm). -SIMPLE TO USE, EASY TO REPLACE THE BLADE Replace the blade in less than 10 minutes. No skill required. -WE STAND BEHIND OUR PRODUCT Please contact us any time for any questions or concerns on our strippers.

• For Light Use Only!!! Stripping range: Diameters from 0.12″ (3mm) up to 0.78″ (20mm), best for larger wire.Can not strip smaller wires from say dishwasher, stoves, washing machines, and refrigerators!!!
• Buy now and earn 1 pc free blade.
• All aluminum frame.
• Weights only 2.9LBS. Light weight and portable.
• Strip only the plastic/rubber layer of the cable/wire. Won't strip telecommunication cable.

User questions & answers

Question:	Will it strip 350mcm and 500 mcm
Answer:	I’m not sure the sizes exactly
Question:	Where can i find replacement parts like the feed wheels? I looked for a web site none came up
Answer:	Contact the manufacturer, that's what I did And they were very helpful. This item is made in china. It take many weeks to get the parts.
Question:	Why in the customer's questions does it state it cannot do 350 mcm cable? it states the stripping range goes up to 0.78 in. and 400 mcm is 0.728 in
Answer:	You can but I would cut it down to a smaller length because of the weight
Question:	Will it strip 3/0 and
Answer:	Yes it dose

Product description

Automatic Electric Wire Stripping Machine w/ Wire Gauge Range: 0.04"-0.79" (1mm~20mm)

The automatic electric wire stripper is designed for stripping scrap copper wires. It's portable and energy saving, can be operated by starting a drill and winding a handle. Two different sized feeding holes and one blade allow your various needs. Wire Gauge Range: 0.04"-0.79" (1mm~20mm), high performance guaranteed. Easy to mount and use.

40W Motor

40W motor, 110V 60HZ. Made of durable aluminum alloy. Weight: 2.5kg( 5.51lbs). Easy to mount and use.

High Performance

Two different sized feed holes for wires in diameter range 0.04"-0.79" (1mm~20mm).

Adjustable Regulating Nut

To meet your work need, the distance between the blade and shaft can be changed by adjusting the regulating nut.

Power Adjustable

Controller Output: DC 3~12V 5A, adjustable power leads to adjustable speed for different needs.

Handle & Drill Driven

You can start you stripping work with a hand crank, or an electrical drill. Easy to use. 

Widely Used

Remove the plastic and rubber insulation from undamaged scrap wire, and widely used in wiring harness processing, wire recycling dismantling, and other industries.

Specifications

Power: 40W

Controller Input: 110V 50-60Hz

Controller Output: DC 3~12V 5A

Wire Gauge Range: 0.04"-0.79" (1mm~20mm)

Blade Outer Diameter: 49.5mm(1.95")

Blade Inner Diameter: 21mm(0.83")-26mm(1")

Blade Thickness: 12mm(0.47")

Material: Aluminum Alloy

Size(LXWXH): 25X20X6.5cm(9.8"x7.8"x2.5")

Weight: 2.5kg( 5.51lbs)

Package Content

1 x Wire Cable Stripper

1 x Power Controller

1 x Holder

1 x Screw Set

• 【POWERFUL MOTOR】- Our automatic wire stripper has a 40W strong motor, 110V 60HZ, silver. A compact and long lasting frame of aluminum alloy, lightweight with 2.5kg( 5.51lbs) to be portable and easy to use. It can be mounted easily to any bench or work station.
• 【LARGE CAPACITY】- Our wire stripping tool has two different sized feeding holes, allowing wires in diameter 0.04"-0.79" (1mm~20mm), 2 mounting holes available. Blade can be adjusted up and down by twisting the regulating nut for cables in different sizes. Blade Thickness: 12mm(0.47"), Outer Diameter is 49.5mm(1.95") and Inner Diameter: 21mm(0.83")-26mm(1").
• 【POWER CONTROLLER】- Power can be changed by adjusting output voltage, Controller Output: DC 3~12V 5A, Controller Input: 110V 50-60Hz.
• 【HANDLE&DRILL DRIVEN】- The cable stripper can be driven by start a electric drill to power it for a convenient and fast working. Soft start design.
• 【WIDE USAGE】- The electrical wire stripper machine is widely used in wiring harness processing, aerospace wire processing, audio and data line processing, wire recycling dismantling and other industries.

Product description

This handy and durable wire stripping tool is ideal for removing the hard plastic and rubber coating/insulation from undamaged scrap wire. Ideally, you want to harness this copper wire stripping device to a stabilized bench clamp in your work shop and/or you garage. The specially designed blades are made of a high carbon steel. This wire stripping tool is designed to strip various wire gauges.

• Weight :: 13 oz (sturdy & light weight aluminum)
• Blade :: Hardened Steel Angled Blade
• Wire Gauge Range :: 18 awg - 6 awg

• 【STRONG MOTOR】- Cable wire stripping machine single phase 1/4HP 110V 60HZ, power: 180 W. With solid aluminum alloy, this wire stripper can last for years and withstand rigorous environment
• 【SHARP BLADES】- Sharp blades with stripping speed: approx. 60 feet per minute. Different sized feed holes are suitable for most of wires. Wire gauge range: 0.06-1.0 inch diameter
• 【PORTABLE & CONVENIENT】- Designed with hand cranks and drill driven technologies, this electric wire stripping machine is easy to operate. Measured at 9.4" x 12.6" x 12.6" and weighing merely 33 lb for portable and convenient to use
• 【HEAVY-DUTY GEARBOX】- Leads to fast stripping speed, fixed machine position, safe and reliable use. Fast start and stop buttons protected by plastic cover to be energy saving
• 【WIDE APPLICATIONS】- One EXTRA blade, one wrench and one pair of gloves are included. Perfect for recycling copper wire, removing the plastic and rubber insulation from undamaged scrap wires, range including 0.06" to 1" diameter cables

User questions & answers

Question:	How big of awg wire can you strip with this machine
Answer:	this is possible from 14 to 2/0 copper or 4/0 aluminum
Question:	Asin: b07slxjx1g will this item strip romex wire? can the blades be sharpened
Answer:	You have to manually strip the outer jacket but the machine will strip the individual conductors. You can probably sharpen the blades if you bring it to someone to sharpen. The blade is an oversized pipe cutter blade. I've ran probably 2000 feet of wire through mine and the blade is still sharp

Product features

Aluminum Alloy Construction

Constructed from solid aluminum alloy, this wire stripper can withstand rigorous environment and last for years. Driven by 1/4 HP motor.

High-Powered Engine

With single phase 1/4HP 110V 60HZ, power 180W, it's stripping speed is approx. 60 feet per minute, time and energy saving. Big fun for fast heat releasing.

Sharp Blades-

Made of high strength special alloy. Great grinding workmanship, easy to cut the protective cover of wire. Last much longer service time than high speed steel. One free blade for replacement.Outer Diameter: 65mm(2.56");Inner Diameter:29mm(1.14") -35mm(1.38");Thickness: 15mm(0.59")

Wide Compatibility

Adjustable blades and rollers on the cable wire stripping machine fit with all sizes’ wires with diameters from 0.06" (1.5mm) up to 0.98" (25mm). Different sized feed holes are suitable for most of wires.

Portable & Convenient

Designed with drill driven technologies, this electric wire stripping machine is easy to operate. Measured at 9.4" x 12.6" x 12.6" and weighing 28.7 lb.

Heavy-duty Gearbox

Heavy-duty gearbox leads to fast stripping speed, fixed machine position, safe and reliable use. Besides, one pair of gloves, one wrench and one blade are also included in the package.

Electric Wire Stripping Machine with An Extra Blade

This Automatic Stripping Machine attaches a wire up to 25mm. It's easy to operate, portable and convenient, energy saving, nice appearance. You can get copper wire after the single blades stripping. You can recycle your copper wire, benefit from non-insulated pure copper wire.

Product description

0. 06-0. 98 inch diameter wire stripping machine 1 cutting blade Manual Wire stripper introduction: the Manual Cranked industrial wire stripping machine features 1 Channel of cutting wheel for stripping scrap copper wire. It strips wire form 0. 06 inch up to 0. 98 inch diameter. This heavy duty industrial framed machine weighs 12 lb. And the blades have been fully guarded to ensure complete safety. We that our machine is a kind of high-qualified light weight construction, which is made of durable steel. Generally speaking, this machine can remove the plastic and rubber insulation from undamaged scrap wire, recycle copper wire and benefit from non-insulated Pure copper wire. Item Specifications: wire stripping machine range: 0. 06-0. 98 inch size: 5. 9*5. 12*12Inch weight: 12 lb. Hole: 1 Package Content 1 x wire stripping machine with handle 1 x feeding panel 1 x drill operated rod 1 x Hand crank 2 x spanner 1 x Manual

• 【ALUMINUM CONSTRUCTION】- Aluminum alloy material-manual wire Stripper with high-quality lightweight construction made of durable aluminum alloy, designed for long service time.
• 【SAFE CUTTER BLADE】- Made of durable material that lasts much longer than a traditional blade, the machine has been fully guarded to ensure complete safety. The blade and shaft achieve high working efficiency.
• 【EASY TO USE】- There is an adjustable blade, feeding panel, and nut on the cable wire stripping machine, smoothly and suitable for any shapes cable. You can mount easily to any bench or work station.
• 【HAND-CRANK DRIVEN】- It is easy to operate with hand crank or drill is driven, portable and convenient, energy saving, beautiful appearance. Also, the machine can connect to an electric drill for automatic wire stripping.
• 【WIDE APPLICATION】- This machine is automatic, and the wire range is up to 25mm, widely used in wiring harness processing, aerospace wire processing, audio and data line processing, wire recycling dismantling and other industries.

User questions & answers

Question:	how do i order replacement blades
Answer:	You have to go the site where you bought it on that same site were you bought it they sell extra blade right there ! And ask if want to buy extra blades and just order them from there
Question:	What ifthe wire has kinks in it
Answer:	Un- kink it. Cut it out.
Question:	Will it strip 4/0 wire
Answer:	Yes
Question:	Aya ke numero de grosor puedo pelar
Answer:	#4

Product features

Durable Material

With a high-quality lightweight construction, the manual wire stripper is made of durable aluminum alloy. The blades have been fully guarded to ensure complete safety.

Replaceable & Quality Blade

Quick Blade Change: Push out the shaft, and the blade comes off. The quality blade achieves high efficiency.Outer Diameter: 49.5mm(1.95");

Inner Diameter: 21mm(0.83")-26mm(1");

Thickness: 12mm(0.47")

Adjustable Feeding Panel

Suitable for removing the plastic and rubber insulation from undamaged scrap wire. You can recycle your copper wire, benefit from non-insulated pure copper wire. Have different sized feed holes.

Regulating Nut

The regulating nut allows adjustment of the distance between the blade and shaft as the work need.

Efficient Hand Cranks

With a hand crank, this manual wire stripping machine is easy to operate; the machine can connect to an electric drill for automatic wire stripping.

Wide Application

This machine is automatic, and the wire range is up to 25mm，widely used in wiring harness processing, wire recycling dismantling, and other industries.

Manual Wire Stripping Machine

This machine is Manual Wire Stripping Machine, Which uses drill or handles to strip scrap copper wire. The wire range is up to 25mm. It's easy to operate with the hand crank, or drill is driven, portable and convenient, energy saving, beautiful appearance. You can get copper wire after the single blades stripping. You can recycle your copper wire, benefit from non-insulated pure copper wire.

Product description

Description:

Constructed from solid aircraft grade aluminum alloy, this wire stripper can withstand rigorous environment and last for years to come. Our wire stripping machine can remove the plastic and rubber insulation from undamaged scrap wire, which can be widely used in automotive wiring harness processing, aerospace wire processing, audio and data line processing, wire recycling dismantling and other industries.



Specification:

Material: Aluminum Alloy Steel

Weight: 12.0 lb.

Product Dimension: 8.9” x 5.1” x 12.6”

Color: Aluminum Alloy



Package List:

1 x Wire Stripping Machine with handle

1 x Feeding Panel

1 x Drill Operated Rod

1 X Hand Crank

2 x Spanners

1 x Manual

• ALUMINUM ALLOY CONSTRUCTION: Constructed from solid aluminum alloy, this wire stripper can withstand rigorous environments and last for years to come.
• ADJUSTABLE BLADES FOR WIDE COMPATIBILITY: The adjustable blades and rollers on the cable wire stripping machine fit with all size wires with diameters from 0.06” (1.5mm) up to 0.98” (25mm).
• PERFECT FOR RECYCLING COPPER WIRE: This wire stripping machine can remove the plastic and rubber insulation from undamaged scrap wire. A must-have for recycling your copper wire!
• FAST STRIPPING SPEED: The smooth gliding hand crank rapidly strips at a speed of 50 feet per minute. The singe-phase induction ensures its safety.
• PORTABLE & CONVENIENT: Measured at 9.4” x 12.6” x 12.6” and weighing merely 33 lbs, this cable stripper is portable and convenient to use anywhere at any time!

User questions & answers

Question:	Will it strip charging cables
Answer:	Yes, it will strip charging cables.
Question:	Can it strip 14awg to
Answer:	Yes. The manual wire stripping machine can strip wires with diameters from 0.06 in. to 0.98 in. (1.5 mm to 25 mm). 14awg equals to 1.628mm. 2/0 equals to 9.266mm.
Question:	do they have replacement blades available
Answer:	They dont have replacement blades??? Well how the heck do you use it when your blade gets dull??
Question:	Whats the largest awg it can strip
Answer:	Hi, the wire gauge range is 1.5mm - 25mm.

Product features

Description:

Constructed from solid aerospace-grade aluminum alloy, this wire stripper is built to easily endure years of heavy use. Removing the plastic and rubber insulation from undamaged scrap wire has never been so effortless. If you reclaim cable for automotive wiring harness processing, aerospace wire processing, audio data line processing, wire recycling dismantling, or other industries, the CO-Z Wire Stripping Electric Power Tool has the capacity and convenience to make your job much easier.

SIMPLE OPERATION & EXTRA CONNECTION:

• Designed with a manual hand crank and the option of drill-driven operation, this wire stripping machine is convenient to use even after your arm gets tired from manual operation.

WIDE APPLICATION:

• Widely used in wiring harness processing, aerospace wire processing, audio and data line processing, wire recycling dismantling and other industries.

Adjustable Feeding Panel:

• Strips all wires with diameters from 0.06 in. to 0.98 in. (1.5 mm to 25 mm).

ADJUSTABLE BLADE HEIGHT:

• Adjust the height of the blade to various cable sizes by simply rotating the blade regulating knob.

STEEL ALLOY BLADE:

• The sharp steel blade adjusts for various cable diameters. In addition, the blade can be sharpened in order to extend its lifetime.

• ALUMINUM ALLOY CONSTRUCTION: Constructed from solid aluminum alloy, this wire stripper can withstand rigorous environments and easily endure years of heavy use.
• EASY OPERATION & WIDE COMPATIBILITY: The electric motor powers drill-driven technology while the adjustable blades and rollers fit all wire sizes with diameters from 0.06” (1.5mm) up to 0.98” (25mm).
• THE CROWN OF COPPER CABLE RECYCLERS: This wire stripping machine removes the plastic and rubber insulation from undamaged scrap wire - a must-have for recycling your copper cable.
• 1.5 HP SINGLE PHASE INDUCTION MOTOR: Motorized to save you time, effort, and money, it creates a fast stripping speed of 50 feet per minute, plus the hands-free design increases safety and convenience.
• PERFECTLY PORTABLE: Measured at 9.4” x 12.6” x 12.6” and weighing only 33 lb, this cable stripper is portable and convenient to move around your workstation.

User questions & answers

Question:	Will this strip 4/0 wire
Answer:	The product fits with all sizes’ wire with diameters from 0.06” (1.5mm) up to 0.98” (25mm). Thank you.
Question:	how much for the cutting blade
Answer:	15.00 or less
Question:	How to get a replacement wheel and bearing
Answer:	Yes
Question:	Will it strip 500 mcm
Answer:	Yes

Product features

The Portable Cable Stripper for Scrap Copper Recycling:

Constructed from solid aerospace-grade aluminum alloy, this wire stripper is built to easily endure years of heavy use. Removing the plastic and rubber insulation from undamaged scrap wire has never been so effortless. If you reclaim cable for automotive wiring harness processing, aerospace wire processing, audio data line processing, wire recycling dismantling, or other industries, the CO-Z Wire Stripping Electric Power Tool has the capacity and convenience to make your job much easier.

WATERPROOF SWITCH:

Waterproof buttons are safe and convenient. The blade will stop cutting immediately when you press the off button.

WIDE COMPATIBILITY:

Different sized feed holes are suitable for wires with diameters from 0.06” (1.5mm) up to 0.98” (25mm).

FAST STRIPPING SPEED:

Heavy-duty gearbox produces a fast stripping speed of 50 feet per minute, improving working efficiency.

ADJUSTABLE SCREW NUT

You can adjust the height of the blade by turning the screw nut to fit wires of different sizes.

Specification:

• Power: 180W
• Wire Gauge Range: 0.06” (1.5mm) - 0.98” (25mm)
• Motor: 1/4 HP Single Phase Induction Motor, 110V 50-60Hz
• Stripping Speed: Approx. 50 feet per minute
• Overall Dimensions: 9.4” x 12.6” x 12.6”

Product description

Manual Cable Wire Stripping Machine

This manual cable wire stripping machine is designed for stripping scrap copper wires. It's portable and energy saving, can be operated by winding the hand crank, or by starting a drill. Two feeding panels of four different sized feed holes and two blades allow your various needs. Wire Gauge Range: 1.5 mm-25 mm, Stripping Speed: About 50ft/min, high performance guaranteed. 

High Performance

Has different sized feed holes for wires in diameter range 0.06"-1" (1.5mm~25mm).

Adjustable Blades

To meed your work need, the distance between the blade and shaft can be changed by adjusting the regulating nut.

Replaceable Blades

Two blades are included in the package. Their Outer Diameter is 49.5mm(1.95"), Inner Diameter 21mm(0.83")-26mm(1") and Thickness: 12mm(0.47").

Handle & Drill Driven

You can start you stripping work with a hand crank, or a electril drill. Easy to use.

Durable Material

Made of durable aluminum alloy, gurantees a stable performence.

Widly Used

Remove the plastic and rubber insulation from undamaged scrap wire, and widely used in wiring harness processing, wire recycling dismantling, and other industries.

parameter

• Material: Aluminum Alloy
• Wire Gauge Range: 0.06"-1" (1.5mm~25mm)
• Stripping Speed: About 50ft/min
• Blade Outer Diameter: 49.5mm(1.95")
• Blade Inner Diameter: 21mm(0.83")-26mm(1")
• Blade Thickness: 12mm(0.47")
• Size(LXWXH):15X13X31cm(5.91"X5.12"X12.21")
• Weight: 3.8kg(8.38 lbs)

package includes:

• 1 x Wire Stripping Machine
• 1 x Replaceable Blade
• 1 x Feeding Panel
• 2 x Wrench
• 1 x Screw Set

• 【WIDE WIRE DIAMETER】- Our wire stripping machine has two feeding panels of four different sized feed holes, allowing wires in diameter from0.06"(1.5mm) to 1" (25mm). The panel with 3 holes can be fixed accordingly, 4 mounting holes available.
• 【BLADES ADJUSTABLE】- Two blades with Thickness: 12mm(0.47") can be fast to change and Stripping Speed: About 50ft/min well performed. The adjustable blades and rollers on the cable wire stripping machine fit with all size wires with diameters from 0.06” (1.5mm) up to 0.98” (25mm).
• 【HAND-CRANK DRIVEN】- The wire stripper can be driven by winding the hand crank, smooth and easy to use. Also you can start a electric drill to power it for a convenient and fast working.
• 【ALUMINUM & COMPACT】- This cable stripper has a compact and long lasting frame of aluminum alloy, lightweight with 3.8kg(8.38 lbs) to be portable and easy to use. It can be mounted easily to any bench or work station.
• 【WIDE APPLICATION】- The wire stripper machine is widely used in wiring harness processing, aerospace wire processing, audio and data line processing, wire recycling dismantling and other industries.

• Patented New Features--Only Available from TheCopperMine TM:
• Good for wires from 24 AWG to 7/8"
• Input Guide: Wire gets straightened and aligned automatically. Good for kinked or tangled wires.
• EZ Start Cutter: Get the copper out quick & easy after the insulation is slit
• Blade Sharpening Jig: Restore dull blade in seconds.Jig sets the precise angles for easy sharpening.

User questions & answers

Question:	Is that valid for cat6 or cat
Answer:	this is a very easy entry level project to put together the steps are really easy to follow and require minimal handyman experience.
Question:	im having trouble placing the wire so i can pull through an cut at the same time, wire slides off the wheels
Answer:	That would depend on what you're storing in it. I wouldn't put heavy cans in it. I use it for shoes. They don't weigh a lot. Maybe hot and cold cereal or rice, lightweight stuff. That's how I would use it for a pantry. Just to be on the safe side. I love it for my shoes. it's holds the overflow of shoes from my closet. I can put 2 pairs of womens shoes on each shelf. I should have gotten the taller one.
Question:	Will this strip solid 18 gauge wire
Answer:	Yeah you could I guess. I never had a reason to. I just put them on top. Not sure how it would look without one of the shelfs missing.
Question:	Can this strip catv cable such as r
Answer:	Its sturdy and we are very pleased with it, but its not wood

Product features

Input Guide:

Don't frown to the tangled and kinked wires anymore! Just let the machine pull the wire from the pile. The wire gets pre-aligned and straightened before reaching the blade. No more derailing due to off-axial dragging.

CT Model 210

Exclusive New Features (US and Foreign Granted and Pending Patents): Add-on adapter adds three great new features--a brand new way to strip wires.

Output Limiter:

Separate copper from jacket while pulling the wire through the machine, all in one stroke. The separation point won't reach the blade, which causes the wire to derail from the rollers. You work speed is doubled!

EZ Start Cutter

• CopperMine Patented Feature.
• Designed for thin wires with tightly wrapped insulation.
• Lets you get the copper out quick & easy after the insulation is slit.
• Cutting Edge is sharp and safe.

Blade Sharpening Jig

• The original blade has 3 carefully sharpened cutting surfaces at the perfect angles that combine sharpness and durability
• Restore dull blade in seconds.
• Jig sets the precise angles for easy sharpening.

Corner Mount Clamp

Clamp-mount on the corner of your bench quickly!

Vise Mount

Hold with a vise.

Bolt Down

Bolt down permanently, no extra hardware needed.

• Help to remove plastic and rubber insulation from undamaged scrap wire. 3/8" Hex Drill Interface: No slip. Fits ALL drills.
• Quick Blade Change: Push out the shaft and the blade comes off. Adjustable Wire Clamps: Prevent thin and soft wires from "escaping" the blade. Adjustable to clamp down wire with different sizes.
• Adjustable Wire Guide: Gauge range from 0.12" to 1" (3mm - 25mm).
• Three Convenient Mounting Methods: Clamp on the bench corner; bolt down on the bench; held by the vise.
• Durable Blade: Made of special alloy that lasts much longer than high speed steel.

User questions & answers

Question:	Does this come with the blade
Answer:	Yes it comes with 8... you only need to use one at a time. Each blade works in every hole.
Question:	will this work well on 1 inch industrial copper cable
Answer:	I USE IT ON STRAN WIRE FROM VAC MACHINE ITS IS A GOOD TOOL AND WORKS. This tool should work. you need to get used to the pressure required for it to cut outer rubber coating. its hard to answer this question. house wire I use box knife.
Question:	does it strip lamp cord
Answer:	I'm not sure, there seem to be 3 different types of steel used to make this. There are the needle blades, the allen head screws and the block. The block seems to be made from some kind of powder coated type of ferrous metal.
Question:	Will stranded 10awg pv wire work with this
Answer:	yes it will strip braided wire but the smaller sizes are more difficult to set the stripping blade correctly for. larger sizes work great

Product features

EASY TO OPERATE:

1. Adjust the distance between blades and shaft in accordance with the cable size, to ensure the insulating layer stripped and the inner conductor undamaged.
2. Feeding: strip the cables through feeding hole. You can adjust the feeding hole to a proper position where wire can enter into but not swing.
3. Stripping: rotate the hand crank to start peeling.

NOTE:

For replacement stripping blades, please search B01MZ7UT40.

For replacing tool (snap ring plier), please search B089GVJ367 or B089K96T5S.

Independent and Lightweight Structure

Package Contents:

1 X wire stripping machine;

1 X handle; 4 X 8# screw

4 X screw nut; 1 X 8# wrench

1 X 6# wrench; 1 X 8*16 screw

5 X spacer; 1 X drill parts

1 X feeding panel

Replaceable Drill

• 3/8" Hex Drill Interface: No slip. Fits ALL drills.
• Durable Blade: Made of special alloy that lasts much longer than high speed steel.
• Convenient and quick blade change replacement: Just nee to push out the shaft and the blade will come off.

Widely Used

• Adjustable Wire Guide: Gauge range from 0.12" to 1" (3mm - 25mm).
• Three Convenient Mounting Methods: Clamp on the bench corner; bolt down on the bench; held by the vice.
• Adjustable Wire Clamps: Prevent thin and soft wires from "escaping" the blade.

Product description

Features:



- Metal construction, sturdy and durable

- Used for removing isolation from scrap wire and getting copper out quickly, enhancing your stripping efficiency

- Blade and three rollers can be easily adjusted to fit different size of wires

- Portable, easy to operate and convenient to carry

- Applicable to 1/16" to 13/16" dia. wires

- Easy to assemble and disassemble, can be mounted on the corner of table, bench and work station



Specifications:



- Material: Iron

- Overall Dimension (LxWxH): 7 7/8" x 1 3/4" x 7 5/16" (20 x 4.5 x 18.5 cm)

- Wire Dia.: 1/16" to 13/16" (1mm to 20mm)

- Weight: 3.5 lbs (1.6 kg)



Package Contents:



- 1x Wire Stripping Machine

- 2x Blades

- 2x M8x6.5CM (3 1/8" x 2 9/16") Bolts

- 2x Nuts

- 4x Iron Washers

- 1x Knob

- 1x Manual

• Used for removing isolation from scrap wire and getting copper out quickly, enhancing your stripping efficiency
• Metal construction, sturdy and durable
• Blade and three rollers can be easily adjusted to fit different size of wires
• Applicable to 1/16" (1mm) to 13/16" (20mm) dia. wires; Overall Dimension (LxWxH): 7 7/8" x 1 3/4" x 7 5/16" (20 x 4.5 x 18.5 cm)
• Easy to assemble and disassemble, can be mounted on the corner of table, bench and work station

Product description

Automatic Electric Wire Stripping Machine w/ Wire Gauge Range: 0.06"-1" (1.5mm~25mm)

The automatic electric wire stripper is designed for stripping scrap copper wires. It's portable and energy saving, can be operated by starting a drill. Two feeding panels of four different sized feed holes and two blades allow your various needs. Gauge Range: 1.5 mm-25 mm, Stripping Speed: About 60ft/min, high performance guaranteed. 

Power Motor

180W motor, single phase 1/4HP, 110V 60HZ. Made of durable aluminum alloy. Weight: 13.5kg( 29.77lbs).

High Performance

Has different sized feed holes for wires in diameter range 0.06"-1" (1.5mm~25mm).

Adjustable Regulating Nut

To meet your work need, the distance between the blade and shaft can be changed by adjusting the regulating nut.

Replaceable Blades

Two blades are included in the package. Outer Diameter is 49.5mm(1.95"), Inner Diameter 21mm(0.83")-26mm(1") and Thickness: 12mm(0.47").

Heavy Duty Design

Easy to use. Heavy-duty gearbox, fast stripping speed.

Widely Used

Remove the plastic and rubber insulation from undamaged scrap wire, and widely used in wiring harness processing, wire recycling dismantling, and other industries.

Specifications

• Wire Gauge Range: 0.06"-1" (1.5mm~25mm)
• Stripping Speed: 60ft/min
• Voltage: 110V 50-60Hz
• Power: 1/4 HP / 180W
• Phase: Single Phase
• Motor: Induction Motor
• Blade Outer Diameter: 49.5mm(1.95")
• Blade Inner Diameter: 21mm(0.83")-26mm(1")
• Blade Thickness: 12mm(0.47")
• Material: Aluminum Alloy
• Size(LXWXH): 36X31X37cm(14.18"X12.21"X14.57")
• Weight: 13.5kg( 29.77lbs)

Package Content

• 1 x Electric Wire Stripping Machine
• 1 x Replaceable Blade
• 1 x Feeding Panel
• 1 x Wrench

• 【LIGHTWEIGHT DESIGN】- Our wire stripper has a 180W strong motor with single phase 1/4HP, 110V 60HZ. lightweight with 13.5kg( 29.77lbs) to be portable and easy to use. Soft start design.
• 【LARGE STRIPPING CAPACITY】- Our wire stripping tool has two feeding panels of four different sized feed holes, allowing wires in diameter from 0.06"(1.5mm) to 1" (25mm). The panel with 3 holes can be fixed accordingly, 4 mounting holes available.
• 【BLADE ADJUSTABLE】- Two blades with Thickness: 12mm(0.47") can be fast to change and Stripping Speed: About 60ft/min well performed. Blade Outer Diameter is 49.5mm(1.95") and Inner Diameter: 21mm(0.83")-26mm(1"). Blades can be adjusted up and down by twisting the regulating nut for cables in different sizes.
• 【HEAVY DUTY GEARBOX】- The wire stripper attaches a heavy-duty gearbox leading to fast stripping speed, fixed machine position, a reliable choice for you.
• 【VARIOUS APPLICATIONS】- The electrical wire stripper machine is widely used in wiring harness processing, aerospace wire processing, audio and data line processing, wire recycling dismantling and other industries.