14 best vise for drill press

Product description

The IRWIN Drill Press Vise features a slotted base for easy installation and positioning. Crafted of forged iron for durability with textured 4" jaws that grip securely, this lightweight and portable drill press has a 4-1/2" jaw capacity and is perfect for light duty tasks.

From the Manufacturer

The IRWIN 226340 4-Inch Drill Press Vise provides stability and pressure for drilling applications. This vise is made of forged iron and has a clamping pressure of 1000-Pound.

• Slotted base for easy installation and positioning
• Textured jaws for secure gripping
• 4.5 Inch jaw capacity perfect for light duty tasks
• Lightweight and portable
• Crated of forged iron for long-lasting durability

User questions & answers

Question:	the slots on my drill press are 4.5 inches center to center. will this fit my drill press
Answer:	The slots on this vise is 6" center to center. You can angle the vise to line up with the holes on your drill press.
Question:	Is this tool made in USA, or china/mexico/other?? Thank you
Answer:	Seems to be China
Question:	What hardware is required to attach to the drill press
Answer:	4 bolts , nuts and lock washers. Don't remember the size but you want them to be snug in the holes that mount the vise to the base plate of the drill press.
Question:	Will this vise bolt to a Rockwell Rk7033 drill press
Answer:	I have a Delta bench top drill press, and I can bolt it down. Unfortunately I don't know much about the Rockwell drill press.

Product description

A low profile drill press vise for smaller quill travel applications. Black oxide coated ACME threaded screw provides consistent clamping force. Hardened, V-grooved jaws hold round shaped objects both vertically and horizontally. Vise is backed by Wilton's lifetime warranty.

• SIMPLICITY: Base has four 1/2" shoulder slots for quick, easy positioning on the machine table.
• VERSATILITY: Designed for applications including drilling, tapping, and reaming.
• DURABILITY: Sturdy construction with fine-grain cast iron castings and hardened steel vise jaws.
• PRECISION: Highly accurate with beds and bases parallel to ±.001".
• COMPACT: Low profile clearance for increased working room on machine table.

User questions & answers

Question:	Will this mount on a Harbor Freight 8" 5 speed drill press? How do you mount it
Answer:	If your drill press has slots in the table, like mine does, just put a couple of bolts through vise and table.
Question:	How wide are the slots that can be used to clamp this to the table
Answer:	The slots measure 2.17" L x .51" W.
Question:	Do the jaws stay parallel when clamping? I've had drill presses where the jaws move a bit when clamped
Answer:	Yes to a point. I am not aware of any vises that will remain parallel if something is clamped off center and the sides of the piece being clamped are not parallel. This vise has a rod that run the length of the opening down the middle to help keep the movable jaw aligned. As it wears the movable jaw can move more.
Question:	What is the spacing between the mounting slot (center to center)? Thank you
Answer:	Hi Craig, it is 5 & 3/16 c to c. Slots are about 1/2 wide.
Question:	Which stand do I need for this press
Answer:	We do have our own stand up stand that fit for the press.

Product description

Product Description:

This 4" cross sliding vise will easily turn your drill press into a milling machine. With the vise and its precise moving slider, wood and metal parts can be easily processed with high precision and high quality. It can also be connected to a lathe or other tools to fix the workpiece in the exact position required. 

Key Points:

• Durable cast iron construction
• Powerful serrated steel jaws
• Cold rolled steel screws
• 2 swivel crank handles for adjusting vise front to back and left to right
• Bolt down slots for securing
• Hinged vise crank handles drops out of the way
• Designed for woodworking and metalworking 

Product Specification:

• 3.5" throat opening, 5" longitudinal and 3.5" cross travel, jaw width: 4" - Maximum
• Vise and cross slide have adjustable shims
• Cross slides have removable adjusting crank handles 

• Durable cast iron construction, Powerful serrated steel jaws
• 4 Inch Wide Jaw, Cold rolled steel screws
• 2 swivel crank handles for adjusting vise front to back and left to right, Bolt down slots for securing
• Hinged vise crank handles drops out of the way, Designed for woodworking and metalworking
• 3.5 Inch throat opening, 5 Inch longitudinal and 4.5 inch cross travel

User questions & answers

Question:	Does this fit a 8" drill press
Answer:	Base is cast iron. Fairly heavy - decent stability. Infeed and outfeed tables, once adjusted, are very solid and true.
Question:	Will it work on a 9 in drill press
Answer:	Yes - cast iron base. Very solid and stable.
Question:	What is the height to the bottom of the clamp surface
Answer:	Easy? I wouldn’t define it as easy to change the blades but anyone with some mechanical knowledge and patience can do. Yes the blades can be purchased on Amazon.
Question:	Will this fit on this drill press? https://www.amazon.com/gp/product/b005ukglas/ref=oh_aui_detailpage_o00_s00?ie=utf8&psc
Answer:	No

Product description

Wilton 11746 6-Inch Low Profile Drill Press Vise

• Designed For Applications Including Drilling, Tapping And Reaming
• Low Profile Clearance For Increased Working Room On Machine Table
• Hardened V Grooved Jaws Hold Round Shaped Objects Both Vertically And Horizontally

User questions & answers

Question:	How is the vice attached to the drill press
Answer:	Base 9 3/8" x 10 7/8"Bolt slots 7 7/8" center to center
Question:	I am considering buying this vice but I need what the dimensions are of the base & what is the distance center to center on the bolt slots? Thank you
Answer:	I use my vise on a vertical mill/drill, although I’ve done very little milling. The jaws on my vise are very tight with no perceivable wobble. Wilton makes good vises, albeit a bit pricey. Sometimes the price is worth it, my vise has proven that to be true.
Question:	Do the jaws of the vise wobble, meaning when clamping something with half of the jaws will the other half go in or bend in
Answer:	I used 1/2 " carriage bolts with flat washer and wingnut for quick adjustments , !/2 " is the largest that will work. hope this answers your question.
Question:	What diameter mounting bolts can you use with this vise
Answer:	You can technically mount it with lag bolts, but there's no way to have it centered, or even use it to drill without turning the whole table to a weird angle. Got one of these for my 4208 (4802?) (the 8" model) and it's pretty pointless. You could use any vise and just clamp it on as well as this works.

Product description

The Yost 6 Light Duty Drill Press Vise features a slotted base for easy installation and positioning. Crafted of forged iron for durability with textured 6" jaws that grip securely, this lightweight and portable drill press has a 6jaw capacity and is perfect for light duty tasks. Yost stands behind this product with a quality guarantee.

• Slotted base for easy installation and positioning
• Slot Width: 0.6"
• Slot centerline: 7.15"
• Mount vise to drill press using fasteners (not provided) or clamp in place using C-Clamps (not provided)
• Textured jaws for secure gripping
• 6 inch jaws x 5.75" jaw opening x 1" throat depth
• Lightweight and portable
• Crafted of cast iron for long-lasting durability

User questions & answers

Question:	What is the distance between the slots? Without this dimension how do I know if it would fit my drill press table
Answer:	These vices are made to fit any standard drill press table and base. You will be just fine.

Product description

Wilton's cross slide drill press vises allow repeat drills or taps in a workpiece by sliding in two axes. All of these vises boast hardened v-grooved jaws for clamping round objects vertically and horizontally. Backed by Wilton's lifetime warranty.

• ACCURACY: Move your workpiece horizontally and longitudinally for precise positioning.
• PRECISION: Cast side knobs accurately dial in .1mm increments.
• STABILITY: Durable base has five bolt lugs for easy mounting to a machine table.
• DURABILITY: Heavy-duty construction with fine-grain cast iron castings.
• VERSATILITY: Hardened V-Groove jaws hold round-shaped objects both vertically and horizontally.

User questions & answers

Question:	Does this come with the bolts to attach to the drill
Answer:	No it does not come with mounting bolts. You will have to obtain your own hardware to attach it to a drill press.
Question:	what is the throat depth ? (how tall are the jaws vertically
Answer:	1.4" . Great X-Y vise. Do dis-assemble and tighten the grub screws.
Question:	whaty are the dimensions of the base, how far apart are the mounting holes
Answer:	3-1/2" slots along sides separated 4" for 1/2' dia. mtg bolts, also one centered on end 2-1/2" from side holes. Have found any arrangement of three will accommodate any positioning on drill press table.
Question:	Will this vise fit bolt on to my Harbor Freight 8 inch press
Answer:	If it has the cross slots X it should fit. I use it on a 10 Wen from HD.

Product description

Manufactured from graded cast iron, these vices have a precision ground base and vice bed for smooth lateral movement of the movable jaw; Longitudinal & transversal prisms in the fixed jaw allow for firm gripping of round jobs of different sizes both horizontally & vertically, special seat in jaws facilitates retaining of flat work pieces; Vises are equipped with a convenient Uni-grip mechanism;

• Manufactured from graded cast iron, these vises have a precision ground base and vise bed for smooth lateral movement of the movable jaw.
• Longitudinal and transversal prisms in the fixed jaw allow for firm gripping of round jobs of different sizes both horizontally and vertically
• Special seat in jaws facilitates retaining of flat work pieces
• Vises are equipped with a convenient Uni-grip mechanism; Spindle moves inside the hollow hand grip allowing the vise to be used at a location away from the table edge.
• Jaw Width: 4”; Jaw Opening: 3-5/8”; Jaw Depth: 1-3/16”

User questions & answers

Question:	is this picture of the right product
Answer:	Yes, the picture is correct.
Question:	What is the depth of the jaws
Answer:	the jaw depth is 1.3/16" or 30 mm
Question:	What is the center to center distance between the hold down slots in the mounting base
Answer:	Center to Center is 4 7/8". The slots are 9/16" wide.
Question:	would someone please change the picture to the right vice? I am not going to buy until you care enough to correct your mistake
Answer:	My vice matches this picture....

Product features

Groz 35121 4" Uni-Grip Drill Press Vise

Manufactured from graded cast iron, these vices have a precision ground base and vice bed for smooth lateral movement of the movable jaw.

Longitudinal and transversal prisms in the fixed jaw allow for firm gripping of round jobs of different sizes both horizontally and vertically.

Special seat in jaws facilitates retaining of flat work pieces. Vices are equipped with a convenient unigrip mechanism. This feature increases the scope of application of this range of vices.

About Groz Tools

Anyone can make tools. Many can even make good tools. But if you are looking for peace of mind that comes with the assurance that your specifications will be adhered to, your deadlines will be bettered and that you can communicate with people in a language that you understand, your choices are surely limited. For those who have been in the business long enough to make the facts, Groz is the natural choice.

That is because we deliver hassle free solutions. Rest assured. We are Groz & we are addicted to excellence. We specialize in design, manufacture & marketing of a vast range of tools & equipment, Driven by a strong value system, state of the art manufacturing facilities & an enthusiastic team of men & women.

Product description

GOOD CREATIVE NEED GOOD TOOLS.



P.S.

Your purchase and perfect shopping experience make us happy, but if you encounter a vise part failure during use, please contact us in time we will give you a satisfactory solution.



In order to protect the soft metal, wood or other fragile items, and firmly fix it in place, we have specially provided additional RUBBER PAD.



Feature:

Net weight 4.1 lbs, Maximum width of jaw opening 4.0 inch. The vise is a good helper for light applications such as home, amateurs, jewellery, electronics, etc. Buyers feedback that the vise is not only convenient but also durable because the jaws are quenched and normalized to increase the hardness and toughness of the jaws; and the non-slip texture on the inside of the jaws increases the vise jaw bite. The clamping is strong and not slippery, lay the foundation for your work smooth completion.



The vise surface is sprayed and treated, it feels comfortable to the touch and the paint will not fall off.



Gifts:

Vise, Storage bag, Cutting knife, Rubber mat, Warm and smiling customer service.



Be happy to add it in your shopping cart, we sincerely hope that you have a pleasant experience.

• Data: The jaw of vise can be opened up to 4 inches.
• Wide range of use: 4 inch cast iron drill vise can precision process various shapes of wood, metal, plastic and other precision parts. In order to protect the soft metal, wood or other fragile items, and firmly fix it in place, we have specially provided additional RUBBER PAD.
• Stability: Fix the workpiece firmly in place to achieve safe and accurate drilling. The heavy-duty cast iron base and four on-board mounting slots provide stability to the vise during operation.
• Broad compatibility: 4-inch drill presses are compatible with most drill press benches on the market.
• Material: The clamp table is forged with a spray-forged hardening process to ensure ultimate durability and long service life.

Product description

Remember when you could make fine-tune adjustments with the simple turn of a wheel? The WEN 4-inch Cross Vise provides stable support for your workpieces. Perfect for incremental drilling and other precision work. Attach it to your bench top, your drill press, your work table and more. Made from heavy duty powder-coated cast iron, the WEN cross vise grips tightly onto your workpieces, providing over 1900 pounds of clamping force. The 4.25 by 1.25 jaws open up to 4.125 inches wide. Make minor adjustments along either axis with the onboard hand wheels. Each hand wheel features machined 0.1 mm increments, each full turn representing 3 mm of travel. The vise moves a full 5.8 inches (148 mm) along the x-axis and 6 inches along the Y-Axis (150 mm), making it the perfect companion for woodworkers and metalworkers alike. The fixed jaw features a v-shaped Groove to hold round objects either vertically or horizontally while the removable handles help users easily install the vise into tight spaces. With five 1/2-inch mounting brackets positioned around the outside edge of the vise's base, the WEN cross vise is compatible with the majority of drill press tables on the market. And because it’s a WEN product, your cross vise comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN.

• 4.25 by 1.25 inch jaws open up to 4.125 inches wide
• Constructed of industrial-strength powder-coated cast iron
• Hand wheels feature machine-marked 0.1 mm increments for maximum precision
• Jaws travel 5.8 inches left and right and 6 inches front and back
• Universal design compatible with the majority of drill presses on the market (see images for base dimensions)

User questions & answers

Question:	Which size sliding vise is the best for the 4214 12inch drill press
Answer:	I am using the 4214 in a 12 inch press and it works fine for me. Depends on your individual use. These are stiff initially and require some breakin.
Question:	Is there sufficient clearance to use wen 415cv 5-1/8-inch vise on a 10-inch vise? what is its height bottom of base to top of vise jaws
Answer:	Exactly 6 inches.
Question:	This vise (4 inch) appears to be the same as "wilton 11694 4-inch cross slide drill press vise", can anyone comment on this please
Answer:	better than no slide vise
Question:	Does this vise come with the mounting hardware (Nuts/Bolts) so that it can be secured onto the drill press
Answer:	My vice was shipped with two machine bolts, washers and nuts. Appears very designed and fabricated at an exceptional value. I paired it with the WEN 4210 10" drill press I just purchased from Amazon, also an exceptional value. I've used these kinds of products for over 50 years and rate WEN one of the best values around. I remember the original American company and still have a their electric wet stone that still works! I think the Chinese company that now owns WEN is trying to emulate their predecessor's value and integrity.

Product features

WEN 414CV 4.25" Compound Cross Slide Industrial Strength Benchtop & Drill Press Vise

Remember when you could make fine-tune adjustments with the simple turn of a wheel? The WEN 4.25-Inch Cross Vise provides stable support for your workpieces. Perfect for incremental drilling and other precision work. Attach it to your bench top, your drill press, your work table and more. Made from heavy duty powder-coated cast iron, the WEN Cross Vise grips tightly onto your workpieces, providing over 1900 pounds of clamping force. Make minor adjustments along either axis with the onboard hand wheels. Each hand wheel features machined 0.1 mm increments, each full turn representing 3 mm of travel. The vise moves a full 5.8 inches (148 mm) along the x-axis and 6 inches along the y-axis (150 mm), making it the perfect companion for woodworkers and metalworkers alike. The fixed jaw features a V-shaped groove to hold round objects either vertically or horizontally while the removable handles help users easily install the vise into tight spaces.

With five 1/2-inch mounting brackets positioned around the outside edge of the vise's base, the WEN Cross Vise is compatible with the majority of drill press tables on the market (including the WEN 4210, 4212, 4214, 4225, and 4227 drill presses).

Product description

Remember when you could make fine-tune adjustments with the simple turn of a wheel? The WEN 3.25-Inch Tilting Vise provides 90 degrees of stable and reliable clamping action. Great for incremental drilling and precision work. With a locking cradle and positive work stops every 15 degrees (0, 15, 30, 45, 60, 75, and 90 degrees), this vise is the perfect companion for your benchtop, your drill press, your work table, and more. Made from heavy duty powder-coated cast iron, the WEN Tilting Vise grips tightly onto your workpieces, providing over 1900 pounds of clamping force. The 3.25-by-1.75-inch jaws open up to 3.25 inches wide. The fixed jaw features a V-shaped groove to hold round objects either vertically or horizontally while the removable handles help users easily install the vise into tight spaces. With six 1/2-inch mounting brackets positioned around the outside edge of the vise’s base, the WEN Angled Vise is compatible with the majority of drill press tables on the market, including the WEN 4210 and 4212 10-Inch Drill Presses, the WEN 4214 12-Inch Drill Press, the WEN 4225 15-Inch Drill Press, and the WEN 4227 17-Inch Drill Press. And because it’s a WEN product, your cross vise comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN.

• 3.25 by 1.75 inch jaws open up to 3.25 inches wide
• Constructed of industrial-strength powder-coated cast iron
• Features 7 positive tilting stops; one every 15 degrees from 0 to 90
• Five 1/2-inch mounting brackets allow for compatibility with the majority of drill press tables on the market
• Compatible with the WEN 10-Inch, 12-Inch, 15-Inch, and 17-Inch Drill Presses

User questions & answers

Question:	Does anyone know if this will fit on the fordom drill press? That uses the flex shaft as a motor
Answer:	I don't see why not it's only about 2and1-2inches tall.
Question:	is compatible whit Wen 4208 8 in
Answer:	No it is too big for the table on the 4208. I purchased both and ended up returning this. As far as height it will fit but the slots to bolt it on hang over the edges. Could possibly clamp it somehow. If turned diagonally you can line up for 2 bolts to go through but it wouldn’t be very functional to line up with the bit.
Question:	Do you think this is rigid enough for a milling machine
Answer:	For milling small parts you should be ok.
Question:	Will the face pads come off
Answer:	no pads on the jaws

Product description

HHIP pro-series quick slide drill press vise. Made of high grade strong stress relieved iron casting. Precision ground. 3.5-inches jaw opening. Jaw measures 3-inches width by 1.25-inches depth.

• Pro-series quick slide drill press vise
• Made of high grade strong stress relieved iron casting
• Precision ground
• 3.5-inches jaw opening
• Jaw measures 3-inches width by 1.25-inches depth

User questions & answers

Question:	Would the 3 inch work for milling out an 80 ar lower
Answer:	Not sure what you mean "an 80 ar lower"? Do you mean 80 mm? I have the 4" jaw width, nice vice but only used it once! When I bought it it was $66?
Question:	Where is it manufactured
Answer:	This vise is manufactured in China in the same factory that produces well known American brands that are made to their specs for export
Question:	What is the exact width of the gap between the jaws when the 3" vise is fully closed? Can it clamp something 3/16" thick
Answer:	It has a stepped jaw, so the bottom of the jaw closes tight. The step measures .177 wide when it is fully closed and .980 deep. Full height of the Jaw from the top to the bars is 1.650.
Question:	What is the distance between center to center for the mounting slots
Answer:	On the 3900-0183 3" vise the mounting slots are 4.08" apart, center to center. The slots are 2.32" long and .55" wide.

Product features

3900-0183 - Pro-Series High Grade Iron Quick Slide Drill Press Vise - WC

HHIP Pro-Series High Grade Iron Quick Slide Drill Press Vise is made of high grade strong stress relieved iron casting. Precision ground. Jaw width is 3". Jaw opening is 3-1/2". Jaw depth is 1-1/4". Approximate width between bolt holes is 4". Total width is 5 1/2". 1/2" mounting slots.

Product description

If you own a drill press, you owe it to yourself to see just how easy this Bora 4” Drill Press Clamp makes your projects. It fastens to the table of virtually any make and model drill press, and holds fast whatever it is you are working on. This allows for increased precision and ease of drilling, without you worrying about previously-used vise grips or c-clamps never quite getting the job done. We’ve added a host of features that customers love, and designed this woodworkers and DIY enthusiasts everywhere. The slotted bottom is designed to easily bolt to virtually any drill press base; the oversize grip is comfortable and pivots 90 degrees for increased clamping power; the steel jaws are rock solid, and will hold your material fast without marring it; and the quick release makes it a pleasure to use – you can quickly and easily reposition your material, making drilling multiple holes simple. It’s lightweight, yet super strong, and comes with a lifetime warrantee, making this drill press vise a great value.

• Large 4" jaw capacity is ideal for thousands of projects.
• Easily and securely attaches to your drill press’ table. The holes are 4-1/2" long and are 5" apart, allowing for virtually any manufacturer’s drill press to be accommodated.
• Aluminum die cast body with steel jaws securely holds your material without marring it.
• Main tightening screw is chrome plated steel.
• Quick release button for easy repositioning of your project / material.

User questions & answers

Question:	This vise says 4" capacity; assume this is max open, what is width & height of jaws? also, is jaw surface metal or plastic
Answer:	Mine did not. Just the inside foam and cover. I didn't notice any smell.
Question:	bolt size needed for mounting
Answer:	It doesn’t flatten but it’s not very dense foam so if you lay on it, it gets pretty flat
Question:	What is the distance between the mounting slots center to center from one side to the other
Answer:	Hi, Zensolo can comfortably support up to 44lbs or 20kgs. The average weight of a head weighs 10-12lbs. So yes, Zensolo should be fine for larger people. Please be reminded that Zensolo provides firm acupressure. It would not suitable for people who prefer light acupressure Kind regards Steve from Client Services
Question:	what is the maximum opening of the jaws
Answer:	Hi thanks for your question. The answer is, yes it absolutely does and was designed for a stiff neck. The 6 silicone balls provide firm pressure targeted at specific acupressure points along your neck to increase blood flow and relaxing tense muscles. It also provides gentle neck traction Please let us know if you have any further questions. Have a great day Steve from Client Servces

Product features

Bora Drill Press Vise

With it's universal design, heavy-duty construction, and clamping pressure, this drill press vise will provide consistent, professional results with every project.

For a Variety of Projects

The vise was designed to be used with a drill press, but can also be mounted to most work surfaces.. With a 4-inch clamping capacity, the vise will accommodate a variety of materials and projects.

Non-Marring Pads and Pivot Handle

The jaws feature non-marring pads to eliminate pressure marks on virtually any material. Also featuring an over-sized, soft-grip handle for comfortable use and pivots 90 degrees for quick adjustments.

Quick Release Button

For speed and convenience the vise contains a quick release button and accommodates most drill presses with 4.5” holes that are 5” apart.

• Jaw width: 4"(100mm) , Jaw Height: 3/4" (19mm), Jaw Opening: 4-3/8" (110mm)
• Durable and Sturdy: drill press vise is made from high strength cast iron. 30,000 PSI
• Serrated jaw plate provide higher clamping force about 1760lbs for secure grip
• Slotted Base for frimly mounting and locating to all kinds of drill press, perfect for light duty tasks
• Threaded screw for easy drill press vise adjustment

User questions & answers

Question:	Does it comes with screws to attach the base
Answer:	The jaws open to a maximum of 3 and 15/16 inches. The body of the vise is made of some kind of light-weight alloy (aluminum?) but the faces of the jaws are steel and the guide rods are too. The dimensions of the steel jaw faces are 3 and 15/16 wide by 1 and 1/2 inches deep. (Yes, the width of the jaws measures exactly the same as the maximum open measurement.)
Question:	What is this drill press vise made of
Answer:	The width of the slot in the 551027 is 7/16 inch.
Question:	What is the on-center measurement for the slots (side-to-side
Answer:	The slots on mine are 5 inches apart from center to center.
Question:	is it made in china
Answer:	Mine is a smidgen over 3 7/8".

Product features

Forward Drill Press Vise 4", Q194A

Forward 4" Drill Press vise is made from high quality cast iron. It is suitable for stable drilling operations at home and workshop.

Slotted Base for frimly mounting and locating to all kinds of drill press.Serrated jaw plate for secure grip; The blue power coating make the vise elegant appearance and anti-corrosion.

Dimensions

Regardless of its durability, it's surprisingly lightweight and easy to carry, allowing you to take it around and set it up.

Wide Use

With a 4-inch capacity, you can use the vise to complete almost any suitable drilling task, as it is wide enough to accommodate most workpieces.

30000PSI

It offers a strong and durable build made with cast iron 30000PSI, ensuring uses for diverse drilling tasks without worrying about tool damage.

Powerful

Forward Q194A 4" Drill Press Vise is reinforced with appropriately textured jaw clamps and 1760lbs grasping pressure, hold your workpiece securely in place during drilling.

Product description

Mount the TEKTON 4 in. Drill Press Vise to your drill press table and get professional results with perfect hole placement every time. Whether it's a wood, metal, or plastic part, you can work better, faster and safer knowing it's properly secured and won't shift or twist. Made from 30,000 PSI cast iron, durability and dependability are built in. The sure grip of replaceable steel jaws is evenly distributed across workpiece surfaces, preventing slipping or crushing. Polished top surfaces are flat and true, to support workpiece and keep it square to drill bit travel. Large bolt-down slots for maximum mobility while re-positioning. Turn the chrome plated folding bar handle and the jaw glides smoothly along the Acme-threaded main screw without binding or chattering, even as clamping pressure increases.

Specifications:

• Material: Cast iron
• Jaw opening: 4-3/8 in.
• Throat depth: 1-1/16 in.
• Weight: 7.25 lb.
• Tensile strength: 30,000 PSI
• Mounting holes : 2-3/4 in.

• Mounts on drill press table to secure workpiece while drilling
• Cast iron construction (30,000 PSI tensile strength) with powder coated finish
• Replaceable hardened steel jaws
• Chrome plated steel folding bar handle
• Acme-threaded screw glides smoothly without binding

User questions & answers

Question:	Can you get plastic jaws? If so where
Answer:	Yes, just look up "magnetic vice pads" on Amazon.
Question:	What is the hight of the vise ? I need enough clearance for long bits
Answer:	it's 2-1/2" tall
Question:	Sorry but i don't know what you mean "the bottom is a 3-point cast finish. being bolted down, it should always sit true."? will it lay flat
Answer:	Yes it will lay flat
Question:	What is the overall height of this
Answer:	The overall height is 2 and 3/8 inches.

Product features

TEKTON 53994 4-Inch Drill Press Vise

Constructed from 30,000 PSI tensile strength cast iron, the TEKTON 4-Inch Drill Press Vise securely holds metal, wood, and other materials while drilling.

Secure Hold

Get professional results with perfect hole placement every time. Whether it's a wood, metal, or plastic part, you can work better, faster, and safer knowing it's properly secured and won't shift or twist.

Durable Construction

The vise is made from 30,000 PSI cast iron, so durability and dependability are built in. The sure grip of replaceable steel jaws is evenly distributed across workpiece surfaces, preventing slipping or crushing.

Easy Adjustments

Large bolt-down slots add maximum mobility while re-positioning. Turn the chrome-plated folding bar handle and the jaw glides smoothly along the Acme-threaded main screw without binding or chattering, even as clamping pressure increases.