12 best screws for wens

Product description

Remember when you could create perfect pocket joints? Hit all the right angles with the WEN Pocket Hole Jig. This portable jig creates uniform pocket holes in workpieces of all sizes, including standard 2x4s. Hardened steel drill guides help ensure accurate drilling while the fixed toggle clamp easily adjusts to secure your boards in place. The jig is made out of heavy-duty anodized aluminum, with mounting holes for attachment to any bench top or work surface. Variable drilling angles allow the jig to accept a wide range of material thicknesses. This set also includes a portable L-base for drilling pocket holes in tight spaces, mounting hardware for bench top installation, a 3/8-inch step drill bit with depth stop collar, 24 pocket hole plugs, and 100 self-tapping screws (25 in each of the following sizes: 1 inch, 1-1/4 inch, 1-1/2 inch, and 2 inches). And because it’s a WEN product, your pocket hole jig comes backed by a two-year warranty, a friendly customer service phone line, and a stocked inventory of replacement parts, all to make sure you remember WEN.

• Drill quick and accurate pocket hole joints; perfect for carpenters and woodworkers
• Adjustable toggle clamp accepts a range of thicknesses, including standard 2x4s
• Made from heavy-duty anodized aluminum with hardened steel drill guides
• Perfect for both portable and bench top applications
• Includes an L-base for tight spaces, mounting hardware for bench top installation, a 3/8-inch step drill bit with depth stop collar, 24 pocket hole plugs, 100 self-tapping screws, and a two-year warranty

User questions & answers

Question:	will this work for 2x4 wood studs
Answer:	The included screws and driver bit are square heads. The jig will work with other screw geometries, but they are not included.
Question:	Will this system work with kreg bits and screws
Answer:	I assume that you are interested in the lens dimensions. My measurements are not as precise as an Optician's measurements but I will give it a try. Each eye measures 50cm X 44cm or approx. 120cm across both eyes including the nose area. In inches they measure, per eye= 1 7/8in X 1 6/8in or approx. 4 3/4in across both eyes including the nose area.
Question:	Are the screws and screw driver philips, star or square
Answer:	Yes they are, great for computer work. If I ever lose these I would replace them.

Product description

Remember when your screwdriver was a flashlight? How about when your flashlight was also a screwdriver? Either way you look at it, I didn’t get much sleep last night. The WEN 4V Max Lithium Ion Electric Screwdriver and Flashlight provides maximum versatility for all kinds of applications. The two-position handle swivels from a standard drill shape to a horizontal flashlight shape, helping you reach even the most difficult screws. The magnetic quick-change 1/4-inch hex chuck rotates both clockwise and counterclockwise at 180 RPM with 48.7 inch pounds of torque. The handle mounted LED flashlight operates independently of the drill, providing a rechargeable light source in times of need. A second front-mounted LED work light operates simultaneously to the screwdriver, illuminating your workpiece during operation. The hard-shelled carrying case is also packed with accessories, including a wall charger, 8 sockets, 29 short specialty bits, 6 long standard screw bits, and a two-inch magnetic bit extension for maximum reach capacity. And, because it’s a WEN product, your 4V Max Lithium Ion Cordless Screwdriver comes backed by a two-year warranty and a friendly customer help line. Remember when you could hang pictures, assemble furniture, repair electronics, and see in the dark all with one tool? Remember WEN.

• Perfect for hanging pictures, assembling furniture, repairing electronics, or seeing in the dark
• Rear-mounted LED flashlight operates independently of the screwdriver
• Rotatable design flips back and forth from a drill shape to a flashlight shape for maximum versatility
• Quick-change magnetic 1-4-inch hex chuck rotates both clockwise and counterclockwise
• Includes a wall charger, 8 sockets, 29 short specialty bits, 6 long standard screwdriver bits, a two-inch extension magnetic bit holder, a hard-shelled carrying case, and a two-year warranty

User questions & answers

Question:	Does this have a front light
Answer:	the drill when locked in the straight position is 9 inches long. Used in the pistol position 4.50 inches each way.
Question:	What type of socket is it is it sae or metric
Answer:	Lithium ion batteries do not have a "memory" but they do have a charge cycle life.
Question:	What are the dimensions of this cordless screwdriver
Answer:	Yes I did use it the other day to make pocket holes in my studs
Question:	Does this have a memory battery, or can I charge it at any time
Answer:	Yes, it will. You need to manually set the depth collar, but it works fine. So do the screws.

Product description

The WEN 3.6-volt Lithium Ion Screwdriver is a cleverly designed screwdriver that delivers 34 inch/lbs of torque in a compact frame. The small size of this screwdriver makes it convenient to use for small household jobs or when you need to work in tight spaces. The 2 position handle allows you to quickly convert this screwdriver with a push of a button from a pistol grip to a straight grip. An LED light provides good visibility when working in dark areas and a soft grip handle allows for a comfortable secure grip. The 1/4” magnetic chuck makes it easy to change and hold bits in place. A built-in battery status indicator lets you know the capacity of your battery at all times. Includes charger, bits and instruction manual.

• Two position handle, allows for straight or angle use
• Magnetic 1/4 inch chuck for secure bit placement
• Battery charge indicator lights
• LED light to illuminate work area
• Soft grip for user comfort

User questions & answers

Question:	Will it work while charging?does it come with a charger
Answer:	Yes. It comes with a couple of bits (Phillips and straight) and a charger.
Question:	What's the battery's charging time
Answer:	I've never tried, but I wouldn't advise it. It's more for light duty, like wood & drywall.
Question:	Does this come with bits? Battery? Charger
Answer:	Yes if you read the description, there is an led work light on the front IN ADDITION TO the rear flashlight. Also shows it in the 3rd image.
Question:	Does this screwdriver drive screws into concrete
Answer:	Metric

Product description

Remember when you had maximum versatility with your wood lathe? Take on projects of all shapes and sizes with the WEN 4-Inch 4-Jaw Self-Centering Keyed Chuck. This versatile chuck features dovetailed jaws, allowing you to grip the outside of stock between 1.6 to 2.8 inches in size, or to hold internal pilot holes ranging from 2 to 3.2 inches in diameter. If that’s not enough, you can also install the included screw chuck depending on the task at hand. The 1” x 8TPI mounting thread fits a wide variety of wood lathes, including the WEN 3420, 3420T, 3421, 3424, 3424T, 34018, 3427, 34018, 34027 and 34034. NOTE: max recommended workpiece size for 3420, 3420T, and 3421 is 4 inches.

• Scroll chuck perfect for holding bowls, spindles, and other unwieldy wood lathe projects
• Internal jaws tighten around workpieces varying from 1.6 to 2.8 inches in size
• External jaws spread inside of workpieces with pilot holes ranging from 2 to 3.2 inches
• Included screw chuck provides even more options for supporting your projects
• Features a 1” x 8 TPI thread for compatibility with the majority of wood lathes on the market

User questions & answers

Question:	Hello i need wood lathe chuck 4 inch / 100mm with spindle thread m18? can you help me
Answer:	I’m not familiar with the mophorn lathe but the spindle size is the determining factor. This chuck will fit any lathe with a 1” spindle with 8 TPI threads.
Question:	I have a "harbor freight" - lathe - model # 65345 8 x 10" 5 speed 1/2hp .. will this chuck fit my lathe? i believe it's 1" x 8 thread
Answer:	The chuck tightens like the Grizzly and Penn state chucks as well as some of the older nova chucks. The back ring turns like a big chuck key and is tightened with torsion bars (orange handled bars seen in picture) inserted into the holes positioned around the chuck body and back ring
Question:	will this item fit mophorn wood lathe
Answer:	It does come with charger, but I have never attempted to use it while charging. Short charging cable, you would have to be close to your work!!
Question:	How does the chuck maintain it's tightness to the tenon
Answer:	Close to 5 hours, when it's almost completely drained.

Product features

WEN LA4444 4-Inch 4-Jaw Self-Centering Chuck Set

You will now easily be able to increase the size of your wooden lathe by up to 23.6 inches with the WEN 3424EX 23-Inch Cast Iron Wood Lathe Bed Extension. The minimal design is ideal to install at the end of your lathe’s bed. You will be able to take on larger projects around your home with this tool.

Straightforward, Sturdy and Easy to Operate

With a stunning build quality, the WEN 3424EX 23-Inch Cast Iron Wood Lathe Bed Extension provides sturdy frame for various work pieces. Made from cast iron, you can be assured of the toughest durability and sturdiness.

Product description

Remember when you could finally reach those inaccessible screws? the WEN 3.6V Lithium-Ion cordless screwdriver with bits and belt holster provides compact and portable power helpful to any homeowner. The Quick release 1/4-inch chuck rests flush against the top of the driver to allow access to tight corners and awkward spaces. This driver’s unique design makes it the perfect companion for putting together furniture and accessing hard to reach screws. Drive screws and fasteners at a rate of 180 Rotations per minute with up to 31 in-lbs of torque. The battery’s Lithium-Ion cells create a fade-free power supply for hours of steady and consistent operation. An onboard battery meter informs users when their power supply is running low and in need of a charge. Two LED lights at the front of the drill illuminate your workpiece during operation. The lightweight design weighs in at a mere 12 ounces while the soft rubber-backed handle features ergonomic contours that fit perfectly into the palm of your hand. This package includes a convenient carrying holster with bit storage, two Flat head bits, one Phillips head bit, and a charger. And, because its a WEN product, your screwdriver comes backed by a nationwide network of skilled service technicians, a friendly customer help line and a two year warranty all to make sure you remember WEN.

• Unique design perfect for accessing hard to reach screws
• Chuck positioned flush with the top of the driver for tight squeezes and confined spaces
• Lithium-Ion battery cells provide hours of fade-free performance
• Quick release 1/4-inch chuck allows for fast changes between bits
• Includes a carrying holster with bit storage, two flat head bits, one Phillips head bit, onboard light, battery meter, and a charger

Product features

A Unique Design for Tight Spaces

Remember when you could finally reach those inaccessible screws? The WEN 3.6V Lithium-Ion cordless screwdriver with bits and belt holster provides compact and portable power helpful to any homeowner. The quick release 1/4-inch chuck rests flush against the top of the driver to allow access to tight corners and awkward spaces. This driver’s unique design makes it the perfect companion for putting together furniture and accessing hard to reach screws. Drive screws and fasteners at a rate of 180 Rotations per minute with up to 31 in-lbs of torque. The battery’s Lithium-Ion cells create a fade-free power supply for hours of steady and consistent operation. An onboard battery meter informs users when their power supply is running low and in need of a charge. Two LED lights at the front of the drill illuminate your workpiece during operation. The lightweight design weighs in at a mere 12 ounces while the soft rubber-backed handle features ergonomic contours that fit perfectly into the palm of your hand. This package includes a convenient carrying holster with bit storage, two flat head bits, one Phillips head bit, and a charger. And, because its a WEN product, your screwdriver comes backed by a nationwide network of skilled service technicians, a friendly customer help line and a two year warranty all to make sure you remember WEN.

Flush Chuck for Tight Spaces

Our unique chuck design allows the bit to live flush with the top of the drill, letting you access screws and areas other drills can't reach.

Quick-Release Bit Changes

Quick release 1/4-inch chuck allows for fast changes between bits. Simply pull the outer lip to loosen and release to tighten.

Two-Direction Operation

Our 3.6V battery provides a steady rotation of 180 RPM and 31 in-lbs of torque in either direction.

Bits, Charger and Holster Included

Your WEN 3.6V Cordless Screwdriver comes packaged with three bits, a charger and a hook-and-loop carrying holster.

Product description

Remember when you could make fine-tune adjustments with the simple turn of a wheel? the WEN 4.25-Inch tilting vise provides 90 degrees of stable and reliable clamping action. Great for Incremental drilling and precision work. With a locking cradle and positive work stops every 15 degrees (0, 15, 30, 45, 60, 75, and 90 degrees), this vise is the perfect companion for your Benchtop, your drill Press, your work Table, and more. Made from heavy duty powder-coated cast iron, the WEN tilting vise grips tightly onto your workpieces, providing over 1900 pounds of clamping force. The 4.25-By-1.75-Inch jaws open up to 4.25 inches wide. The fixed jaw features a v-shaped Groove to hold round objects either vertically or horizontally while the removable handles help users easily install the vise into tight spaces. With six 1/2-inch mounting brackets positioned around the outside edge of the vise's base, the WEN angled vise is compatible with the majority of drill Press tables on the market, including the WEN 4210 and 4212 10-inch drill presses, the WEN 4214 12-inch drill Press, the WEN 4225 15-inch drill Press, and the WEN 4227 17-inch drill Press. And because it’s a WEN product, your cross vise comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN.

• 4.25 by 1.75 inch jaws open up to 4.25 inches wide
• Constructed of industrial-strength powder-coated cast iron
• Features 7 positive tilting stops; one every 15 degrees from 0 to 90
• Five 1/2-inch mounting brackets allow for compatibility with the majority of drill press tables on the market
• Compatible with the WEN 10-Inch, 12-inch, 15-Inch, and 17-Inch drill presses

User questions & answers

Question:	Does anyone know if this will fit on the fordom drill press? That uses the flex shaft as a motor
Answer:	For milling small parts you should be ok.
Question:	is compatible whit Wen 4208 8 in
Answer:	no pads on the jaws
Question:	Do you think this is rigid enough for a milling machine
Answer:	No much I’m afraid. You can check at Technatools and Pen State Industries for a Spindle adapter that goes from the chuck to a 18mm threaded spindle. If you are in the US it may be harder to find. Both technatoole and PSI are sold here on Amazon.
Question:	Will the face pads come off
Answer:	If it is 1” 8 TPI it will fit. Please double check the specs at Harbor Freight. I’m not sure if the small lathe is 1” 8 TPI.

Product description

8.5 ounce twill 13 inch work short is the dickies original and remains one of their most popular today.

• Hook and Eye closure
• CLASSIC WORKWEAR: This flat front short sits at the waist with a roomy fit in the seat & thighs & a hem that skims the knee. It's made of durable poly-cotton twill that resists wrinkles & spills & features our signature tunnel belt loops for extra support
• STURDY FUNCTIONALITY: Our iconic flat-front loose-fit short (often imitated but never replicated!) features a right leg multi-use pocket, side-seam hand pockets, welt back pockets for flap-free look, permanent crease, and zip fly w/ hook & eye closure.
• QUALITY & COMFORT: Our products are made with quality, comfort & value in mind. Our workwear products have distinctive designs with attention to detail on every garment, including easy care wrinkle resistant fabrics, roomy pockets & sturdy zippers & buttons
• TRUSTED NAME: The world's leading performance workwear brand, Dickies has been making quality workwear & apparel since 1922. All Dickies clothing offers superior craftsmanship & unmatched value to deliver classic style & long-lasting comfort every day.
• We make jeans, outerwear, school & work uniforms, sports shirts, kids wear, hats, socks, underwear, boots, gloves, belts, eyewear, backpacks, bags & much more.

User questions & answers

Question:	Whats the diffrence between the size with a 38 and W
Answer:	Hi we sell slim fit Dickies shorts and the 13 inch loose fit multi pocket shorts. The 13" multi pocket shorts are very roomy and spacious.
Question:	How long is the zipper
Answer:	There is no difference. Just a listing issue on Amazon. Some sellers list their size 36 as 36W and some list as 36. Amazon's catalog reads both as different sizes and so lists them as different sizes. But they are really the same.
Question:	What's the difference between regular fit, loose fit, relaxed fit
Answer:	I don't see why not it's only about 2and1-2inches tall.
Question:	Whats the difference between the size 36 verses 36W
Answer:	No it is too big for the table on the 4208. I purchased both and ended up returning this. As far as height it will fit but the slots to bolt it on hang over the edges. Could possibly clamp it somehow. If turned diagonally you can line up for 2 bolts to go through but it wouldn’t be very functional to line up with the bit.

Product description

3" steel faceplate with screw chuck. Pre-threaded to 1" x 8pi. Faceplate has mounting holes with additional screw chuck option. Includes 1" screw chucks and spare mounting screws. Mount your bowls snugly and securely. Just mark the center of your blank, screw on the chuck at the marked center, and then secure with mounting screws. The combination of screw chuck and faceplate mount provides a very safe and secure bowl turning setup. Other available faceplates: 2" for 3/4" x 16tpi (CF2), 2" for 1" x 8tpi (CF2J), 3" for 3/4" x 16tpi (CF3), 3" for 1" x 8tpi (CF3J), 3" with Screw chuck for 1" x 8tpi (CF3SC), 4" for 3/4" x 16tpi (CF4), 4" for 1" x 8tpi (CF4J), 4" with Screw chuck for 1" x 8tpi (CF4SC), 6" for 1" x 8tpi (CF6).

• 3" Steel faceplate with screw chuck
• Pre-threaded to 1" x 8TPI
• mounting holes with additional screw chuck option
• Includes 1" screw chucks and spare mounting screws
• Combination of screw chuck & faceplate mount provides a very safe & secure bowl turning setup

User questions & answers

Question:	Will this work on a Jet 1221V
Answer:	Mine had the plate, screw and allen wrench. Sounds like you got an incomplete kit. Email Amazon or the seller.
Question:	Inch: Faceplate has (3) mounting holes. ... pray tell what is the bolt circle diameter
Answer:	NO SCREW IS PERMANTLY FIXED IN FACE PLATE. YOU WOULD HAVE TO BUY ANOTHER KIND OF FACEPLATE THAT YOU CAN DO THAT WITH.
Question:	I just received the product but i only got the accessory and not the screw chuck plate. how do i get that, or i'll be sending it back
Answer:	Hi, The size W38 is a invalid on the size drop down box. It should be a size 38. Thank you for contacting Dickies.
Question:	Can you remove the screw chuck if you just want to mount the faceplate without the center screw
Answer:	8 inches

Product description

Remember when your scroll saw could cut in two different directions? Take on the most intricate and artful cuts with the WEN 16-Inch Variable Speed Two-Direction Scroll Saw. The 9/16-inch stroke saws through hard woods up to two inches thick. Adjust the speed anywhere from 550 to 1600 strokes per minute with the simple turn of a knob. The cast iron base prevents vibration and walking during operation while the spacious 16-by-11-inch table bevels up to 45 degrees for angled cut. The adjustable air pump clears saw dust from your work area to give you a clear line of vision as you cut. This combined with the 1-1/2-inch dust port keep your work area clean so you can focus on your woodworking. The saw also includes a hold-down foot clamp for securing your project in place along with a flexible work light that bends and adjusts to whatever position your heart desires. This unique blade holder accepts both pinned and pinless blades while also allowing users to change the direction of their cut to accommodate their particular workpiece. For pinned blades, simply pop the pins out of the front holder and turn the blade 90 degrees. Now, your cuts are no longer confined by the 16-inch throat of the scroll saw. On top of that, our removable pinless blade holder design tightly grips blades to prevent them from coming loose during operation. Onboard blade and holder storage creates simple organization solutions between jobs. And because its a WEN product, your scroll saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line, all to make sure you remember WEN.

• Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
• Variable speed goes from 400 to 1600 strokes per minute
• Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
• Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
• Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a flex light, a dust port, a foot lock clamp, onboard storage, and three blades

User questions & answers

Question:	Is the pinless adapter upgraded in this model
Answer:	Yes
Question:	What’s the difference between this and the
Answer:	The difference is toolless or tooled blade changes. That's the only difference I found in the 2 units.
Question:	What blades are you all using
Answer:	I use spiral blades which, unlike regular flat blades, you can cut by pushing and pulling your piece being cut.
Question:	I am new to scroll saws so have to ask. Is it worth the $40 difference in price for the 3921 over the 3920 and why
Answer:	this model(3921) replaces the 3920, they added a few features and the pinless clamps to the mix. the price difference is for the design changes and the extra pieces they add. 3921 is better than the 3920 when you count in the extra features.
Question:	does it come with sand paper
Answer:	Ours didn't. But just cut a full sheet in half and half again. Love how well it works.
Question:	is it ok to use on an old desk? I am concerned about the circar pattern of this sander, I won't be able to follow the grain of the wood
Answer:	It's a small orbit, about 1/16", like a vibration. For $30 give it a try. If you use fine paper on the last pass and move the sander in the directionof the grain, should be ok. I think it's agreat little tool.
Question:	What about the cutted sections in the sandpaper
Answer:	Hi, Put the sandpaper section on the sander. The sander came with a black square item that has spikes. Push the sander over the spikes and the holes in the sandpaper will appear. Also the holes are only needed if you want to collect the dust in the bag. I do not use the collection bag.
Question:	Where do I find refills online for the 1/4 sheet
Answer:	What is "Full Sized Sheet"? , I see 8 1/2 x 11 and 8 x 10.

Product features

BLACK+DECKER BDEQS300 1/4-Sheet Orbital Sander

The BLACK+DECKER BDEQS300 1/4-sheet orbital sander is ideal for finish sanding and detail work around the house. This sander runs at 1,600 orbits/minute with 2.0 amps of power for efficient material removal. This sander offers high-performance dust collection to provide a clean work surface.

Versatile

This sander runs at 1,600 orbits/minute with 2.0 amps of power for efficient material removal.

Convenient

This sander features paddle switch activation for easy on/off during application.

Ergonomic

With a compact size and ergonomic design, this sander can get into tight spaces and maximizes user control.

Efficient

Ideal for detail work and finish sanding, this sander also offers high-performance dust collection to provide a clean work surface.

Beveling Table

The spacious table features a 16-inch depth for cutting large workpieces and bevels up to 45 degrees to the left.

Blade Variety

Whether your preference is pinned or pinless blades, the WEN 16-inch Variable Speed Scroll Saw handles them both.

Variable Speed

Variable speed can be adjusted anywhere from 550 to 1600 strokes per minute with the simple turn of a knob.

Flexible Worklight

The flexible worm work light can be adjusted and moved to illuminate workpieces of any shape and size.

Product description

Remember when you could make fine-tune adjustments with the simple turn of a wheel? The WEN 5-1/8-Inch Cross Vise provides stable support for your workpieces. Perfect for incremental drilling and other precision work. Made from heavy duty powder-coated cast iron, the WEN Cross Vise grips tightly onto your workpieces, providing over 1900 pounds of clamping force. The 5 by 1.75-inch jaws open up to 5.125 inches wide. Make minor adjustments along either axis with the onboard hand wheels. Each hand wheel features machined 0.1 mm increments, each full turn representing 3 mm of travel. The vise moves a full 5 inches (129 mm) along the x-axis and 6.5 inches along the y-axis (165 mm), making it the perfect companion for woodworkers and metalworkers alike. The fixed jaw features a V-shaped groove to hold round objects either vertically or horizontally. With five 1/2-inch mounting brackets positioned around the outside edge of the vise’s base, the WEN Cross Vise is easy to install onto your favorite table or workbench. And because it’s a WEN product, your sliding vise comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN.

• 5 by 1.75 inch jaws open up to 5.125 inches wide
• Constructed of industrial-strength powder-coated cast iron
• Hand wheels feature machine-marked 0.1 mm increments for maximum precision
• Jaws travel 5 inches left and right and 6.5 inches front and back
• Five 1/2-inch mounting brackets allow for easy mounting to your workbench

User questions & answers

Question:	Which size sliding vise is the best for the 4214 12inch drill press
Answer:	better than no slide vise
Question:	Is there sufficient clearance to use wen 415cv 5-1/8-inch vise on a 10-inch vise? what is its height bottom of base to top of vise jaws
Answer:	My vice was shipped with two machine bolts, washers and nuts. Appears very designed and fabricated at an exceptional value. I paired it with the WEN 4210 10" drill press I just purchased from Amazon, also an exceptional value. I've used these kinds of products for over 50 years and rate WEN one of the best values around. I remember the original American company and still have a their electric wet stone that still works! I think the Chinese company that now owns WEN is trying to emulate their predecessor's value and integrity.
Question:	This vise (4 inch) appears to be the same as "wilton 11694 4-inch cross slide drill press vise", can anyone comment on this please
Answer:	Yes.
Question:	Does this vise come with the mounting hardware (Nuts/Bolts) so that it can be secured onto the drill press
Answer:	It's not right in front of me, but recollection would be around 5/16-3/8", tops. It fits most common wood screws. I've used everything from 3/4" wood screw up to 2"...