13 best fox drill press

Product description

The ever popular W1667 and W1668 oscillating drill presses now have a big brother. Meet the W1848 floor model oscillating drill Press. Just like the Benchtop versions, this drill Press features our patented oscillating Spindle for efficient contour sanding. Convert from drilling operations to sanding operations in a matter of seconds with just a few tool-free steps.

• Motor: 3/4 HP, 110V
• Swing: 13-3/4"
• Drill chuck: 1/64"-5/8"
• Arbor: JT-33
• Range of speeds: 250-3050 RPM

User questions & answers

Question:	Where can I get a manual for this drill press
Answer:	As answered you can get a copy of the manual from Grizzly or from Amazon.http://cdn0.grizzly.com/manuals/w1668_m.pdfandhttp://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000041994.pdfThey are not identical (40 pages on the Grizzly website, and 27 on the Amazon page).On difference is the depth stop. On the Grizzly site it is a jam nut on the depth stop rodon the left side, on the Amazon it is set on a collar lock knob on the spindle on the right side.My drill press has both depth stops, but the spindle does not have the depth label, and is notmentioned in the manual that came with the drill. When using the oscillating sander feature itcould be damaged if either stop is set.
Question:	Trying to find a replacement belt for the oscillating sander portion (X1668061), anyone know where to find these online
Answer:	I'd been wondering this myself... The Stock part on my W1668 is not a belt, but rather a polyurethane o-ring. The closest analogue I could find was here: http://www.amazon.com/dp/B0051Y2LSO/ref=biss_dp_t_asn If you want true OEM parts, you can call Woodstock international at (360) 734-3482 7AM-5PM PST/PDT M-F
Question:	Is this a jt33 Taper Chuck, anyon eknow, i want to geta keyless for it
Answer:	Yes. Page 14 of the manual supplied with the drill press says, "The drill chuck is seated to the spindle with a JT-33 tapered surface and a screw."
Question:	Can I get this model drill press without damage
Answer:	Also..it's a GREAT drill press!

Product features

Shop Fox Oscillating Drill Press

The ever popular W1667 and W1668 Oscillating Drill Presses now have a BIG brother. Meet the W1848 Floor Model Oscillating Drill Press. Just like the benchtop versions, this drill press features our unique oscillating spindle for efficient contour sanding. Convert from drilling operations to sanding operations in a matter of seconds with just a few tool-free steps.

Oscillating Feature for Sanding Operation

One of the great features of the Model W1848 13-1/4-inch Oscillating Drill Press is its sanding capability. The drill press can be converted from drilling operations to sanding operations in a matter of seconds with just a few tool-free steps. Oscillation reduces heat build up and leaves a smooth finish when sanding.

Floor Model Design

This floor model drill press adds capacity and weight for a rock-solid durable build.

Tilting Table for Versatility of Applications

The W1848 offers the ability to tilt the table 90-degrees to both the left and right. You can adjust the table height and tilt to accommodate for workpiece height or achieve special drilling or sanding angles. You can also move the table out of the way and use the drill press base as a table for drilling or sanding.

Included

This drill press includes a 3-piece spindle sander drum kit with a mandrel and 80 grit sanding paper to fit the 1-inch, 1-1/2-inch and 2-inch drums.

Product description

Shop Fox offers a broad assortment of drill presses to suit every need - from small hobby shops up to professional machine shops. Our unique oscillating models afford two-machine convenience in half the space and our radial drill presses offer unmatched versatility. For the best selection of features, performance and value, look no further than Shop Fox.

• Overall height: 23"
• Spindle travel: 1-5/8"
• Drill chuck: 1/64" - 1/2"
• Dust port size: 2"
• Swing: 8-1/2"

User questions & answers

Question:	Can it cut metal or steel if it can what thickness
Answer:	None that I know of. There were no drill bits in the one I received.
Question:	Can the center support column be replaced with a longer unit, don't see that as a oiption, any ideas
Answer:	Select 'Commercial Sales' as the shipper and this will be shipped out Today.
Question:	Can you drill a 1" hole through a 2x4 and 4x4 on low rpm with out stalling
Answer:	It is not variable speed. You need to set the speed depending what material you're working with. Setting the speed is very easy, and only takes a few seconds. Just need to move the belt, which is easily accessed on the top. I have never owned or operated a drill press with variable speed. Speed needs to be set.
Question:	What size is the base
Answer:	Metal

Product features

Shop Fox W1667 Bench-Top Drill Press, 8-1/2-inch

This bench-top oscillating drill press is a compact machine that can conveniently serve as either a drill press or an oscillating sander and is capable of a wide variety of drilling and sanding operations.

Some key features include a 1/2-horsepower motor along with a 1/2-inch drill chuck and a removable safety key to help prevent unwanted starts.

Oscillating Spindle

This drill press features a precision-ground sanding spindle that can be used with sanding drums between 1 and 2 inches in diameter and up to 4-1/4 inches long. The spindle oscillates, resulting in a better finish and longer-lasting abrasives.

Safety switch

The W1667 features a paddle switch to provide a greater degree of safety over other types of switches due to its oversize paddle and removable lock-out key. No more fumbling around to locate the off button. Simply slap the paddle down to switch off power.

Depth scale

The Shop Fox drill press comes fitted with a depth stop that allows drilling holes at a preset depth. Use the easy-to-read depth scale to locate your desired depth.

Tilting Table

A 7 inches x 7 inches square tilting table allows you to sand surfaces at different angles, while table inserts provide extra support for your work piece.

Dust Port

The machine is also equipped with a 2-1/4-inch dust port that can be connected to a dust collection system to help keep your workshop clean.

Spindle Sander Drum Kit (Sold Separately)

The optional D2677 Drum Sander Set includes three rubber sanding drums 4-1/4 inches in length to accommodate 1 inch, 1-1/2 inches and 2 inches diameter sanding sleeves. This kit also includes one 80 grit sleeve for each drum to get things started.

• Motor: 1/2 HP, 110V, 5A
• Overall height: Bench model: 31-1/2"
• Overall height: Bench model: 31-1/2"
• Number of speeds: 5
• Drill chuck: 5/8"

User questions & answers

Question:	No work light
Answer:	The difference between e6 Soft and 2019 e6 would be 1) Construction: e6 Soft is 3-piece, whereas 2019 e6 is 2-piece 2) Compression: 2019 e6 is softer than the e6 Soft, which will reduce more spin off the tee The new e12 Soft would be the closest model to the e6 Soft, but if you want soft feeling off the tee, we recommend you to try the 2019 e6. Thank you,
Question:	Why is press so noisy, can it be adjusted
Answer:	yes, the new e12 Contact will be available on 2/26. We still sell the current e12 Soft and Speed until the new product is launched.
Question:	Quill travel distance
Answer:	Yes that is correct. Made in Covington, GA. Thank you for reaching out and we hope you enjoy our new e12 product!
Question:	does this have to be bolted to the floor or can it be used as a free standing unit
Answer:	The box of these balls state they are made in Japan

Product features

Shop Fox W1669 1/2 HP 34-inch Bench-Top Radial Drill Press

The Radial Drill Press is one of the most versatile and handy drill presses you can add to your shop. Between the tilt of the head and the tilt of the table, you can drill any angle necessary. You can also use it as a horizontal boring machine. Add to this an incredible swing which allows you to bore to the center of a workpiece that is 34-inches wide and you have one of the best values available in a drill press.

Horizontal Sliding Headstock

This drill press offers the ability to drill wide workpieces up to 34-inches diameter, you can slide the headstock in and out to increase the distance between the drill chuck and the column up to 17-inches.

Tilting Headstock

You can also tilt the headstock from 45-degrees clockwise to 90-degrees counterclockwise for drilling angled holes or for horizontal boring machine use.

Repeat Operations

Using the slide and tilt features, you can drill a line of straight or angled holes without the need to reposition your workpiece after drilling each hole.

Tilting Table

The W1669 features a precision ground cast iron table that features adjustable tilt from 90-degrees both left and right. The table can be adjusted for height and angle making this an extremely versatile machine capable of many applications.

Safety Switch

This drill press also features a safety paddle switch which provides a greater degree of safety over other types of 110 volts on/off switches due to its oversize paddle and removable lock-out key. No more fumbling around to locate the off button. Simply slap the paddle down to switch off power.

Product description

Perform vertical spindle turning on your multi-speed drill press with this Lathe Attachment. Easy setup means quick change over from drill press mode to lathe mode. A 12-Inch tool rest allows a maximum work piece length of 24-Inch when the work piece is reversed.

From the Manufacturer

Perform vertical spindle turning on your multi-speed drill press with this Lathe Attachment. Easy setup means quick change over from drill press mode to lathe mode. A 12-Inch tool rest allows a maximum work piece length of 24-Inch when the work piece is reversed.

• Includes a base plate with live center, 12-Inch tool rest, mounting bolts, mini screw center and spur center
• Fits all drill presses with a through hole in the table
• Tool rest length: 12"
• Maximum workpiece length: 24"
• Maximum workpiece diameter: 6"

User questions & answers

Question:	Could you polish a crankshaft on it
Answer:	No work light, but this is a pretty amazing drill press. Easy enough to clip one one. The radial aspect of it makes it very versatile. You can drill much further towards center of a longer piece, the tilting head is much more accurate and easy to use than a tilting table. Needs to be secured to the floor pretty good. I made a base out of a half sheet of 3/4 plywood with 2 X 6 flat framing. I would not trade it for another. Had a few in the past, this one far exceeds any of them.
Question:	How wide of an item could you work with this system? Could you do the base of a small bowl with it
Answer:	I don't think it's supposed to be noisy?
Question:	Is it dificult to center
Answer:	It's about 3-1/2" with both nuts on. If you need more travel remove nuts and use a needle nose Visegrip.
Question:	I have an 8 inch drill press will it work on mine
Answer:	It is too top heavy with the radial head for free standing. I took a 1/2 sheet of 3/4 plywood, I "framed" it underneath with 2 x 6 laying flat, put a cross member where the front set of base bolts when and then bolted the base to the frame. This gave me a big enough base to keep it stable. Works great, I can slide the drill press aside when not using it.

Product features

Woodstock D4088 Lathe Attachment for Drill Press

Perform vertical spindle turning on your multi-speed drill press with this Lathe Attachment. Easy setup means quick changeover from drilling mode to turning mode. A 12 inch tool rest allows a maximum work piece length of 24 inch when the work piece is reversed.

Base Plate with Live Center

The D4088 includes a base plate with live center for smooth turning operations. The 12 inch tool rest provides plenty of leverage for your tuning needs.

Easy-to-Install

Included with this lathe attachment are mounting bolts for easy installation on a drill press table. Also included is a mini screw center and spur center. This lathe attachment will fit all drill presses with a through hole in the table.

Turn a Range of Stock

The Model D4088 Drill Press Lathe Attachment allows wooden workpieces to be turned on a drill press in the same manner as a wood lathe, only vertically rather than horizontally. Items like small pickets, legs, spindles, candle holders, salt and pepper shakers, handles, dowels, and pins can be made.

Multi Speed Drill Press

The lathe attachment is designed for use with drill presses that offer multiple speeds. This allows for a greater variety of stock to be turned and allows for safer operation when roughing, shaping and finishing.

• Motor size: 1 HP, 1,720 RPM
• Switch: Toggle type
• Spindle travel: 3-1/4-inch
• Accepts 5/8-inch drill chuck
• Built-in 110V light socket

User questions & answers

Question:	Shipping questions
Answer:	one box-you need to check with the carrier-typically they are curbside service
Question:	Does it run in reverse? I want to power tap and need a reversible motor
Answer:	No
Question:	Do you think this machine would be efficient for drilling 1/4” holes in 3/16” mild steel? Production style say running the motor for two hours at a t
Answer:	I think it would be fine. I use it for wood working and am very impressed with it. I put a clamp around the column to keep the table from moving back and forth when putting it up and down. All in all a very good machine for the money.
Question:	What is the od of the main column? i am thinking 3-1/8". can someone please verify for me? thanks
Answer:	Dear J. Gordon,Thank you for your question. The Column Diameter is 3.150". If you have additional questions please contact our SHOP FOX Technical Service Team at 800-840-8420 ext. 2 or email [email protected].

Product features

Shop Fox W1680 1 HP 17-inch Floor Model Drill Press

This solid performing drill press is perfect for the average size cabinet shop or small machine shop. With the powerful cool-running 1 HP aluminum finned motor, Morse Taper #3 spindle for the larger direct mount bits and the closely spaced spindle shaft bearings, you have one of the most accurate drill presses in its class. Solid cast iron construction, precision ground table, sealed ball bearings, and rubber coated quick-adjust handles provide the quality and convenience you want in your machine investment. We even added a built-in light so you can see what you're doing.

Tilting Table

This drill press features a 14-inch diameter tilting table which allows drilling angles from 90 to 0-degrees. The table can be adjusted for height, rotation and angle for a variety of applications. With a 31-1/2-inch maximum drilling depth from chuck to table, this machine offers unmatched versatility.

Safety Features

The W1680 includes a chuck guard to help protect the operator from accidental contact with moving parts or flying debris. The spring loaded guard conveniently flips out of the way for easy tool changes. The paddle switch provides a greater degree of safety over other On/Off switches due to its oversize paddle and lock-out key. Simply slap the paddle down to switch off power.

Product description

These chuck guards are designed to protect the operator from accidental contact with moving parts or flying debris. The spring loaded guard conveniently flips out of the way for easy tool changes.

• Package weight is 1.0 pounds
• Spring loaded for easy tool changes
• Protects the operator from accidental contact with moving parts or flying debris
• Package dimension: 6.0" L x 5.0" W x 6.0" H

User questions & answers

Question:	what is the diameter of the top mounting hole
Answer:	That will basically depend on what mounting options you have for the "tool rest." If you have a large drill press table with accommodating mounting slots, you could probably turn the outside of a small bowl. Hollowing the bowl, however, will present a challenge since the tool rest is not adjustable. Having "been there and done that," if you have interest in turning as a hobby, I would just purchase a proper lathe...the Woodstock system becomes very frustrating, very fast. Good luck!
Question:	I have a Wen 12" model 4214 which size or model shop fox drill press guard diameter do I need
Answer:	It is very easy to center just place fixture in drill table center and adjust side to side.
Question:	Does this product have an ansi rating
Answer:	It doesn't matter if it's an 8, 9, 10, or whatever size the table is. What makes a difference is if it's a bench top or a floor drill press. This tool primarily is for floor drill presses because of the length of the tool rest. There are some bench models this might fit. I would strongly suggest that you should not use a bench press that has less than about 12 inches of distance from on top of the drills table to no less than the bottom of the drills chuck. About 14 if your turning wood less than 2 inches in diameter. The reason I say this is because you always want the tool rest to be as close as possible to what you are turning. This tool works with the principal of applying pressure against your work by raising the table and not by lowering the drill chuck. Be very careful with using this tool because the tool rest is only supported from one side and you will be moving your cutters vertically instead of horizontally which is the most common practice for wood turning.

Product description

Add this 23-3/4-Inch wide by 11-7/8-Inch deep Drill Press Table with 3-Inch high fence and stop block to your drill press for greater work support and increased accuracy. The fence and stop block slide along T-slots for quick, yet secure set-up and a removable 3-15/16-Inch square center block allows thru drilling past the table. Fits all standard drill press tables and includes two universal table clamps. Mortising chisel and clamps not included.

From the Manufacturer

Add this 23-3/4-Inch wide by 11-7/8-Inch deep Drill Press Table with 3-Inch high fence and stop block to your drill press for greater work support and increased accuracy. The fence and stop block slide along T-slots for quick, yet secure set-up and a removable 3-15/16-Inch square center block allows thru drilling past the table. Fits all standard drill press tables and includes two universal table clamps. Mortising chisel and clamps not included.

• 23-3/4-Inch wide by 11-7/8-Inch deep
• 3-Inch high fence
• Includes two universal table clamps

User questions & answers

Question:	What is the distance between the bolts for attaching to the drill press? I contacted tech support and they couldn't answer the question
Answer:	Dear David Rosengren,Thank you for your question. The D4581 Chuck Guard fits drill presses with a 92mm (3.62") quill flange. If you have additional questions please contact our SHOP FOX Technical Service Team at 800-840-8420 ext. 2 or email [email protected].
Question:	What size are the T-slots
Answer:	Yu will have tomeasure the shaft size and order according to manf specs. Sometimes we have to bore out the hole to fit our drills presses
Question:	will this fit the post from a delta 17-900 drill press the post measures 3 1/2"round
Answer:	I am not sure I looked on ours on the shelf ( extra parts ) It is a Rockford systems brand and I do not see a ANSI rating maybe check the website?
Question:	Will this fit a Wen 8in drill press
Answer:	If your drill press is big enough.

Product description

For woodworkers or metalworkers looking for more versatility in their shop, turn to this 20-Inch 1.5 Horsepower Floor Drill Press from Shop Fox and update that old drill press that doesn't do everything you want. This 20-inch drill press offers plenty of power from its 1.5-horsepower electric motor that can deliver speeds up to 3,249 RPMs. Weighing over 300 pounds, this drill press is the largest in Shop Fox’s line, making it the most stable and vibration resistant. The variable speed motor lets you choose from 12 different spindle speeds so that you can always have the right RPM for any situation. This not only saves your bits from being burnt out but also provides a cleaner drilled hole. With the addition of a 110-volt built-in work light, you’ll know you can have all the tools necessary to get the most performance out of this drill press. Wood and metal working should be fun and productive. With this Shop Fox M1039 20-Inch Floor Drill Press, you’ll get the power and efficiency you need to complete any project.

• Swing: 20-Inch
• Drill chuck: 5/8-Inch
• Arbor: JT-3
• Number of speeds: 12
• Range of speeds: 210 to 3,300 RPM

User questions & answers

Question:	Received the drill press, have it together and installed, using 220 wiring. Turned it on and bulb blew, do you have replacement bulbs for
Answer:	The bolts for attaching the Woodstock to your drill press table are 14-1/2" apart. Each bolt clamp would allow for about 2-1/2" adjustment.
Question:	What is the diameter of the column
Answer:	The t slots are the same as normal slots 3/4 wide x 3/8 deep same as what you order on amazon
Question:	What Morse taper does this have
Answer:	It doesn't attach to the post. It attaches to the table that is already on your drill press. Look at the fourth photo.
Question:	What size V belts does this use
Answer:	Yes. That’s what I have. Works well.

Product features

Shop Fox M1039 1-1/2 HP 20-inch

This Drill Press is one of the most versatile and handy machines you can add to your shop, and at over 300 lbs. its the biggest one in our lineup. Woodworkers and metalworkers alike enjoy the huge table, speeds from 210–3,300 RPM, built-in 110V work light over the table, and a generous 4-3/4-inch spindle travel.

Huge Table

The huge 18-3/4 x 16-3/4-inch table tilts 90-degrees both left and right and features T-slots and coolant channels, which allows it to be easily outfitted with a vise or clamps and helps contain cutting fluids when drilling metal. The table height is easily adjusted up or down with the large crank handle and the precision ground cast iron construction ensure a solid and stable platform.

Feature Packed

This drill press features a movable table and headstock, both capable of 360-degrees rotation around the column, a 20-inch swing and is capable of drilling 1-1/4-inch steel. Spindle speeds range from 210 RPM to 3300 RPM, and speeds are easily changed via the V-belt pulley system. Specially designed to provide many years of trouble free service, close attention to detail, ruggedly built parts and a rigid quality control program assure safe and reliable operation.

Flip-Up Blade Guard

The M1039 includes a chuck guard to protect the operator from accidental contact with moving parts or flying debris. The spring loaded guard conveniently flips out of the way for easy tool changes. The paddle switch provides a greater degree of safety over other On/Off switches due to its oversize paddle and lock-out key. Simply slap the paddle down to switch off power.

Product description

These chuck guards are designed to protect the operator from accidental contact with moving parts or flying debris. The spring loaded guard conveniently flips out of the way for easy tool changes.

• Designed For Use With Shop Fox Drill Press Model W1680
• Spring Loaded For Easy Tool Changes
• Protects The Operator From Accidental Contact With Moving Parts Or Flying Debris
• High Quality Product

User questions & answers

Question:	what size hole is this
Answer:	This V-Belt is 1/2" wide, 5/16" tall, and 26" long.

Product description

These chuck guards are designed to protect the operator from accidental contact with moving parts or flying debris. The spring loaded guard conveniently flips out of the way for easy tool changes.

• Designed For Use With Shop Fox Drill Press Model W1669
• Spring Loaded For Easy Tool Changes
• Protects The Operator From Accidental Contact With Moving Parts Or Flying Debris
• Country Of Origin: China

User questions & answers

Question:	What is the hole size
Answer:	Dear LOU TOPASH,Thank you for your question. The diameter of the column is 3-5/8". If you have additional questions please contact our SHOP FOX Technical Service Team at 800-840-8420 ext. 2 or email [email protected].
Question:	will this part fit a drill press with a 55mm quill diameter
Answer:	Dear LOU TOPASH,Thank you for your question. The spindle is Morse Taper #4. The arbor/chuck is Jacobs Taper #3. If you have additional questions please contact our SHOP FOX Technical Service Team at 800-840-8420 ext. 2 or email [email protected]

Product description

This M1111 Milling Machine has all of the important features of the M1110, but with a few extra time-saving luxuries. However, this mill is further fortified with a quick-tilt headstock for horizontal milling, 1 HP brushless motor, a multi-function digital depth scale on the quill, push-button speed control and digital spindle tachometer. The quick reversing tapping feature also makes hole threading simple. Just put the machine in tapping mode, start the tap, and when the thread is completed, push the button at the end of the rack levers and the spindle reverses, immediately withdrawing the tap from the hole. The back-lit digital tachometer tells you the precise spindle speed for matching tooling and material. All of these extra features make the M1111 Milling Machine one of the most sought after machines available! Made in an ISO 9001 factory.

• 1HP, 220v, Brushless DC Motor w/ Step-Up Transformer, 110v Operation
• Push button motor control for forward, reverse, tapping and off
• Variable Speed: 100 - 1750 RPM
• R-8 Spindle Taper
• Over 14" Headstock Movement

User questions & answers

Question:	I'm not trying to nit-pick: one pic has z (vertical) dial or crank on the left-the other one has it on the right. Which is it
Answer:	55 mm
Question:	does the spindle have power feed
Answer:	Yes it should, inside diameter of the clamp is 55mm
Question:	Can I plug it into an standard 110 Volts outlet
Answer:	Hello Betty the hole size is 2 and 7/8 We had to put them on for insurance reasons."only when the inspector shows up" Take care .Jim
Question:	how well can it mill steel? is it too light duty to be useful for mild steel
Answer:	This drill press uses a 60 watt bulb. The light socket included is for 110 volt use only. If the socket is used while operating at 220 volt the light bulb will explode, potentially causing serious personal injury.

Product features

Shop Fox M1111 Deluxe Milling Machine

This M1111 Milling Machine has all of the important features of the M1110, but with a few extra time-saving luxuries. However, this mill is further fortified with a quick-tilt headstock for horizontal milling, 1 HP brushless motor, a multi-function digital depth scale on the quill, push-button speed control and digital spindle tachometer. The back-lit digital tachometer tells you the precise spindle speed for matching tooling and material. All of these extra features make the M1111 Milling Machine one of the most sought after machines available.

Surface Ground Cast-Iron Table

This machine has a precision-ground cast iron milling table that can travel 5-3/4 by 15-1/2 inches, along with a hand wheel and fully geared lift system that can raise and lower the headstock up to 14-3/4 inches. In addition, the headstock can tilt up to 90 degrees for horizontal milling.

Longitudinal Feed

The longitudinal feed, or X-axis is moved by the handwheel at the end of the table. The handwheel easily moves the table in both directions side-to-side. One complete revolution of the handwheel moves the longitudinal feed 0.100 inch for precision adjustments. The scale included on the front of the table is for use when a tight tolerance is not required. The longitudinal feed can be locked in position by a table lock located on the front of the table.

Cross Feed

The cross feed or Y-axis is moved with the handwheel located on the front of the table base and operates in the same fashion as the longitudinal feed for precise front-to-back adjustments.

Digital Readout and Control Panel

The M1111 features a front-mounted emergency stop button, a see-through chip guard with a safety switch, and a quick-reversing tapping function which allows you to create threaded holes.

Tapping Mode

The quick reversing tapping feature also makes hole threading simple. Just put the machine in 'tapping mode', start the tap, and when the thread is completed, push the button at the end of the rack levers and the spindle reverses, immediately withdrawing the tap from the hole.

Brushless Motor and Variable Speeds

The Shop Fox M1111 mill contains a 1-horsepower, brushless DC motor and a push-button speed control that deliver variable speeds between 100 and 1,750 revolutions per minute (RPM). A back-lit digital spindle tachometer tells you the tool's precise spindle speed so that you can set it to just the right speed for your project.

Product description

This great little machine sports some of the same features found on much larger mill/drills: Dovetail column, variable speed 3/4 HP motor, R8 spindle with digital read out, tapered gibs with double locks, and large 5-1/2" X 19-11/16" Table. This is an excellent value and great for just starting out or even as a dedicated, single-purpose machine in the shop! Purchase the optional D4780 stand for the ultimate mill/drill package.

• Motor: 3/4 HP, 110V, 8A, single-phase
• Spindle taper: R8
• Spindle travel: 2"
• T-slots: 3 @ 2-1/2" Centers, 7/16" Wide
• Head travel: 11"

User questions & answers

Question:	What is the height of this machine from bottom of base to the highest point ? paraplegic trying to build custom stand for this - thanks in advance for
Answer:	Verticle (Z axis) is on the right as the operator stands facing the machine. FYI the Z axis can be a bit heavy when there is a lot of repetitive up and down motion required. I rigged a gas spring that stands parallel to the column and counter balances the weight of the head. Used a 100# 30" oal with 12.8 stroke. Now cranking up and down is almost effortless.
Question:	Is there any way to tram the head on the machine
Answer:	The SHOP FOX Deluxe Milling Machine does not come with a power feed. The power feed, along with many other optional equipment can be seen at the manufacturer's(Woodstock International) website.
Question:	Is it "a large 7 1/16" x 26 5/8 table" or a "large 5-1/2" x 19-11/16" table?" both are mentioned in product description on this page
Answer:	The Model M1111 is designed for an 110V power supply. It requires a minimum of a 15 amp circuit.
Question:	What size chuck does this machine have
Answer:	Steel is not a problem. Its a question of how aggressive the cuts are and the sharpness of the tooling. Its no Bridgeport but adequate for all material and the tapping mode is something I have found extremely useful.

Product features

Shop Fox M1116 Variable-Speed Mill/Drill with Digital Readout

The M1116 Variable-Speed Mill/Drill is an important part of every hobbyist's or machinist's arsenal. Highlighting a dovetail column, variable-speed 3/4 HP motor, R8 spindle with a digital read out, tapered gibs with double locks, and a large 7 1/16" x 26 5/8" table, makes this awesome machine a must have for every shop.

3 Axis Digital Read-Out Display

The M1116 shows off a 3-Axis Digital Read Out display as well as a Digital Read out display on the spindle, allowing you to make sure you have the correct measurments and placement minimizing errors and wasted material.

Variable-Speed

Weather you need high speed or lower speed spindle operations this machine can handle it. Boasting a 50-2250 RPM spindle speed for the extreme precision your project needs.

Optional Stand for M1116 Mill/Drill

• Floor-to-table height: 37-1/2"
• Stand footprint: 15-3/4" x 16-1/2"

Product description

This vise features an exclusive slide bar to prevent jaws from tilting up or sideways when tightening. Adjustable gibs take up any slack on both top and bottom slides. Use this vise on your drill press for cutting keyways and doing light milling jobs.

From the Manufacturer

This vise features an exclusive slide bar to prevent jaws from tilting up or sideways when tightening. Adjustable gibs take up any slack on both top and bottom slides. Use this vise on your drill press for cutting keyways and doing light milling jobs.

• Overall Height: 5-1/4-Inch
• Capacity: 4-Inch
• Jaw Width: 4-Inch
• Jaw Opening: 3-3/4-Inch; Bottom Slide Travel: 4-Inch
• Top Slide Travel: 4-Inch; Approximate Weight: 22-Pound

User questions & answers

Question:	will this fit the shop fox w
Answer:	32 1/2 inches bass to top of motor Housing fully extended upward
Question:	Does this have plastic parts
Answer:	If you put indicator in spindle rotate by hand left and right on table and zero indicator forward and back cannot be done with any adjustments Possible shimming
Question:	What are the mounting dimensions for the vise. My drill press plate will only handle spacing of 5 inches or less
Answer:	The table is 19 11/16 x 5 1/2 inches.
Question:	this shows prime shipping, does it ship prime or does it take 1-2 months to recieve? thanks
Answer:	This Shop Fox M1116 has a drill chuck that is 3‐16mm w/B16 Taper.