12 best screw extractor sets
A screw extractor set is a collection of tools designed to help you remove damaged or stripped screws, bolts, or other fasteners. These sets are commonly used in various fields, including automotive repair, woodworking, and home improvement. Screw extractors are especially useful when you encounter screws that are difficult to remove using traditional methods.
Key components of a screw extractor set typically include:
Extractor Bits: These are specialized bits that have a reverse-threaded design. They grip into the damaged screw or bolt and allow you to turn it counterclockwise to remove it.
Drill Bits: Some sets include drill bits to create a small pilot hole in the center of the damaged screw. This hole helps the extractor bit grip better.
Taps and Dies: While not always included in every screw extractor set, taps and dies are used for thread restoration.If the threads on the fastener or the hole are damaged, you can use these tools to repair them.
T-Handle or Wrench: To provide the necessary torque, many sets come with a T-handle or wrench that you can attach to the extractor bit.
Here's how you might use a screw extractor set:
Drill a Pilot Hole: If included in your set, use the appropriate drill bit to create a small hole in the center of the damaged screw.
Insert the Extractor Bit: Attach the extractor bit to the T-handle or wrench and insert it into the hole you drilled or directly into the damaged screw.
Turn Counterclockwise: Apply steady, firm pressure while turning the T-handle or wrench counterclockwise. The extractor bit should grip the screw and begin to turn it out.
Remove the Screw: Once the screw starts to turn, continue rotating it until it is completely removed.
Screw extractor sets come in various sizes and designs to accommodate different screw sizes and types. It's essential to choose the right size and type of extractor for the job to avoid damaging the fastener or the material it's embedded in.
In summary, screw extractor sets are valuable tools for removing damaged or stripped screws and bolts. They typically include extractor bits, drill bits, and sometimes taps and dies, along with a handle or wrench for turning. Using these tools correctly can save you time and frustration when faced with stubborn or damaged fasteners during DIY projects or repairs.
Below you can find our editor's choice of the best screw extractor sets on the market
Damaged Screw Extractor Kit and Stripped Screw Extractor Set. Its A HassleFree Broken Bolt Extractor and Screw Remover Set
Product description
◉ Stripped and Damaged Screw Extractor Set by Essential Tools
The must have tool for any handyman, car or boat mechanic, contractor, carpenter, woodworker, or anyone who constantly works with screws and bolts. You know how frustrating it can be to try to remove a broken or snapped screw head, stripped bolt, painted over deck screws and much more.
◉ 4 Piece Extractor Set with Storage Case Includes:
1) Removes screw size: 3-5mm
2) Removes screw size: 4-8mm
3) Removes screw size: 5-10mm
4) Removes screw size: 6-12mm
Easily removes screw and bolt head types from flat head, phillips, hex, allen, torx, square, round and any other type of stripped screw or bolt you encounter.
◉ Quick and Easy to Use:
◈ First you want ensure that you are using a bit that is SMALLER than the screw you are trying to remove. That way it has enough room to drill a proper sized hole to extract.
◈ Slowly start to drill a hole into the screw head or bolt with the cutting size. This creates a cone shaped hole that makes it easy for the extractor head to grab onto
◈ Flip the drill bit to the extractor side. Reverse your drill and start slow to allow the threads to catch. Continue to screw or drill until the bolt or screw is fully removed
◈ And that’s it! Within a matter of seconds you easily removed that broken screw without damaging any of your other tools or bits. The high strength steel bit does all the work for you
◉ Specs:
◈ High Speed Steel 4341#
◈ Hardness 63-65HRC
◈ 4 Piece Set with included storage case
The Essential Tools Screw Extractor is the easiest and most reliable way to remove all your stubborn screws and bolts with ease
- APPLY TO ALL DRILLS : 4 pieces screw extractors work with any drill and all the screw size or bolt (3-12mm), These extractor tools are used to reverse the damaged screw counterclockwise until it is released
- POWERFUL : Striped screw extractor removes even the most stubborn stripped, damaged, embedded, rusted and painted-over screws and bolts
- EASY TO USE : Just two simple steps will get the job done - Use a suitable size screw remover to drill a hole with cutting size and it’s easy to extract the screw or bolt using extractor tool
- HARDNESS 63-65HRC : Higher hardness material and is more durable than most screw extractors in market, the hardness and the durability are better than others, Buy with confidence and complete peace of mind
- WARRANTY :Essential Tools stripped screw extractor is backed by our 3 Tier 100% Money Back Guarantee, If you are not satisfied with the product, you can return the product for a full refund without any hassle
User questions & answers
| Question: | Would this bit fit a screwdriver? And do you think I can remove a laptop screw in this manner |
| Answer: | it depends on how crafty you are using similar tools. I used to replace a star screw on a thin RAZER 15" laptop. I placed some pads between the table and the laptop, I didn't push too hard to press the extractor in to the screw so I didn't break the screen. also I would recommend to use very low revolutions in your drill otherwise this thing will perforate the screw and the hole in no time. If you are careful I think you can use it almost anywhere. |
| Question: | What is the smallest size bolt that can be removed with this extractor |
| Answer: | It's made in China. I couldn't find one made in the US. |
| Question: | Does anyone know if these will work on the tiny screws holding an rmr optic baseplate on the slide of a handgun? thanks in advance |
| Answer: | You should choose a size smaller than the screw hole, or you can watch the tutorial with a YouTube video |
| Question: | Is it safe use on a laptop |
| Answer: | Yes. I followed the directions that either came with the remover -- or I looked up on youtube. I can't remember. You may have to experiment with which size you use. I know the first one didn't work, but the second one was right. They did work o.k. with my problem. |
Damaged&Stripped Screw Extractor Remover Tool and Drill Bit Set. Broken Bolt Extractor and Screw Remover Set of 6 Pcs
RWYMQWT
Product description
How to Use:
Step 1: Please ensure that the direction of rotation in the first step must be reversed.Select the right size and slowly start drilling a hole in the screw head or bolt. This will form a conical hole, making the extraction head easy to grasp
Step 2: Switch the bit to the extractor.When a constant downward pressure is applied to the screw and moving at a low speed, pulling out the tip will bite into the screw and pull out the damaged screw Features:
High Quality: This damaged screw removal tool kit is made of high hardness HSS 4341 (hardness 63hrc) alloy steel for durability.
Easy to Operate: In just two easy steps, only the drill bit is needed, no other tools are needed, choose a smaller than the damaged screw, you can easily remove the screw, please ensure that the hole is reversed during this process.
Specifications:
Color: silver
Material: HSS tungsten carbide tip
Packing: 6 Pcs
Length: 51mm/1.97in
Extractor specifications:
0#Remove diameter 2~4mm/0.08~0.16in
1#Remove diameter 3~5mm/0.12~0.2in
2# remove the diameter 4~8mm/0.16~0.31in
3#Remove diameter 5~10mm/0.2~0.39in
4# remove diameter 6~12mm/0.24~0.47in
List:
6*Double head screw
- 6-PIECE SCREW EXTRACTOR SET - The screw extractor set(#0, #1, #2, #2, #3, #4) works with any drill and any size screw or bolt. This damaged screw extractor can remove all common sizes of damaged, stripped or broken screws.
- HIGH QUALITY - This damaged screw remover tool kit is made from High-Speed Steel H.S.S 4341# , which have high hardness of 63hrc, it's durable and easily to remove any damaged screws.
- USER FRIENDLY - Two easy steps, first you just need a drill, select a bit smaller than the damaged screw and begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole (make sure to run the drill in reverse during the process). Next switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw, and then you can easily remove the screw.
- MODERN TOOL : Keep this set in your toolbox to get the damaged screw out and your project back on track. Typically called an easy out or “EZ out”, highly suitable for various machinery repair work.
- QUALITY GUARANTEE - We have carried out strict quality inspection and control on one of our broken screw adapters before they leave the factory, Your damaged screw remover set is backed by our Highest Quality Promise
User questions & answers
| Question: | Where is set made |
| Answer: | They should be identical just different sizes |
| Question: | I've tried 3 different sizes, following the directions each time, and I can't get the extractor side to bite in. What am I doing wrong |
| Answer: | It has a flip up metal handle to carry it, so yes you could put a couple of hooks on the peg board and hang it. |
| Question: | Do you drill in reverse for both steps? that's what the diagram that came with the tool seems to show, but i can't get these to work |
| Answer: | The clips are removable or can be added on this portable socket holder; however, the rails are not removable. Please contact us at [email protected] for additional questions. |
| Question: | Should the 5th bit from the left be smooth all the way around |
| Answer: | The 18” is the length of the tray, excludinng the handle. |
Bosch BSPE6D 12Piece Steel Spiral Flute Screw Extractor Set
BOSCH
Product description
Bosch spiral screw extractor sets feature extractors that are ideal for removing stripped screws, bolts and other fasteners. The left-hand flutes grip the metal firmly. Spiral flutes are used to remove stripped screws from harder materials (straight flutes are for removing stripped screws from softer material). made from heat-treated carbon steel, they are rust- and tarnish-resistant tools. The rolled threads are more accurate and cleaner than machined threads. They are tooled to the most exacting specifications. Laser-etched marking ensures size identification and won't wear off. They feature a precise flute design to ensure the flutes grip firmly.
- Screw extractors – used for removing stripped screws, bolts and other fasteners
- Left-hand flutes – grip the metal firmly
- Heat-treated carbon steel – provides superior durability
- Rolled threads – deliver more accuracy and are cleaner than machined threads
- Rust- and tarnish-resistant design – provides greater durability and accuracy
User questions & answers
| Question: | Will this work for bolts where the heads snapped off trying to remove them? Remaining pieces are a few mm below the surface |
| Answer: | The BSPE6D Spiral Flute country of origin is China. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST. |
| Question: | Will this work for a bolt as small as 10 mm |
| Answer: | I don’t believe so. I thinks it’s designed for Phillips, torx, Allen screws, etc. |
| Question: | Are the drill bits and extractors both left-hand? I think that is the way it is supposed to work. Double checking before purchasing |
| Answer: | The extractors come in different sizes and are designed to "bite" into the screw head so you can then undo the screw using the reverse action of your power drill. So if you choose the correct size extractor to fit into the head of the security screw it should have no trouble removing the screw. |
| Question: | Where is it made |
| Answer: | There is a drill end to cut the pilot hole then revers to us the tapered threaded end to extract the screw |
Product features
Bosch BSPE6D 12Piece Steel Spiral Flute Screw Extractor Set
Bosch Spiral Screw Extractor Sets feature extractors that are ideal for removing stripped screws, bolts and other fasteners. The left-hand flutes grip the metal firmly. Spiral flutes are used to remove stripped screws from harder materials (straight flutes are for removing stripped screws from softer material). Made from heat-treated carbon steel, they are rust- and tarnish-resistant tools. The rolled threads are more accurate and cleaner than machined threads. They are tooled to the most exacting specifications. Laser-etched marking ensures size identification and won't wear off. They feature a precise flute design to ensure the flutes grip firmly.
Damaged Screw Extractor Kit, 6PCS Stripped Screw Extractor Set, Hassle Free Broken Bolt Extractor for any size drill screw or bolt, Screw Remover Set Made From H.S.S 4341 With Hardness 63-65hrc
Product description
Screw Extractor Set of 6
Made of high-density and high-quality 4341 high-speed Steel with 63-65hrc hardness.
Instructions:
➭Step 1 - First, you must make sure that the screws used are smaller than the screws you want to remove. Make sure there is enough space to drill holes of appropriate size for the screw extraction.
➭Step 2 - Start with the drill tip and drill down to create a smooth hole. Make sure the drill rotation is “forward”.
➭Step 3 - Switch the drill bit to the extraction tip. Change the Drill rotation to “reverse”. Apply a slow and constant downward pressure on the screw and move it at a low speed. The extraction tip will bite into the screw and pull out the damaged screw. It can be easily removed in just a few seconds!
Note:
Metal shavings are produced during the drilling process, remove all shavings before extraction.
About the screw extractor:
Material: HSS steel with titanium plated surface
Color: Silver
Tool holder type: Hexagon tool holder
Recommended Screw Extractor for screws and bolts with diameter measuring:
Bit Imperial Metric
#0 smaller than 3/32” (smaller than 3mm)
#1 3/32” – 3/16” (3mm-5mm)
#2 5/32” – 5/16” (4mm-8mm)
#3 3/16” – 13/32” (5mm-10mm)
#4 1/4” – 15/32” (6mm-12mm)
- 🔧【Highest Quality Screw Extractor】--Our screw extractor kit is made of durable high hardened steel--H.S.S 4341 with hardness 63-65hrc. Designed for easily removing screws and bolts. Includes 6 common sizes extractors works with any drill and any size screw or bolt. An It's an essential part of every tool kit box.
- 🔧【Wide Compatibility】--can be widely used in household,telecommunication,automotive or machinery repair work.Suitable for general sizes and all kinds of broken bits. Universal chuck that suitable for most electric hand drills. Remove broken screw in one step.
- 🔧【Tips for Use】-- It is best to use electric hand drill, can not be used the hammer drill mode! Must be low speed during use. Must drill a hole first when the break screw surface is smooth. Otherwise the drill bit will slip. Must be vertical and low speed when drilling, reverse use this bit, drill the first hole deeper will easier to take out.
- 🔧【Easy to Use】-- One drill gets everything done. Use the drill(Dr) bit to drill a hole in broken screws. Change to use the extract(Ex) bit with the same size. Reverse use the drill and take out the broken bit.
- 🔧【Good After-Sale Service】--We always stand behind our product. If you have any problems with the product, just contact us any time. We will provide solution within 12 hours.
Alden 8440P Grabit Pro Broken Bolt and Damaged Screw Extractor 4 Piece Kit
Alden
Product description
Remove broken and damaged screws and bolts in two easy steps. Each of the four dual ended bits in this set feature a burnishing tip to prepare the screw or bolt for removal and a threaded tip to grip and extract them when powered with a 3/8" drill. Removes many types of screws up to 4" in length including hex, Phillips, and square drive and bolts up to 3/8". Each of the four bits are different widths to handle a different range of screw and bolt sizes. Additional Features: Bit #1 handles No. 4-No. 7 screws and No. 10 bolts (5mm) Bit #2 handles No. 8-No. 10 screws and 1/4" bolts (6mm)Bit #3 handles No. 11-No. 14 screws and 5/16" bolts (8mm)Bit #4 handles No. 16-No. 24 screws and 3/8" bolts (10mm)
Everybody knows the frustration of removing stripped screws and bolts. With the Alden 4-Piece Grabit Broken Bolt and Damaged Screw Extractors Set, you can finally get rid of that headache. It is industrial strenghth and is made from high quality tool steel. It is designed to be used in a variable reversible drill but is also effective using a 1/4 inch hex screwdriver and extracts many type fasteners including: Phillips, Slotted, Hex, Trox, Tri-Wing,Pozidriv, Fearson, most tamper resistant screws and many more.
From the Manufacturer
Pro Grabit 4 piece kit works on damaged screws and broken bolts from as small as No. 4 screw to as large as 3/8 in. bolt. Quickly and easily removes most damaged screws such as Hex, Phillips, Torx, Square Drive; sizes No.4 - 24 from wood, plastic or metal up to 3 inches in length. Two-step drill bit and extractor in one tool extracts broken bolts and damaged screws fast; use in reverse only when drilling and extracting with reversible hand held power drill. Can drill up to grade 8 or 10.9 class fasteners; extracts bolt sizes No. 10 - 3/8 in. (5mm - 10mm). Serrated extracting end of tool results in greater torque for hard to remove bolts and screws. No bolt preparation required. Professional grade multi-purpose extractors compatible with "quick-connect" chuck systems or chucked directly into drill. Good for multiple extractions with single tool.
- Two-step drill bit and extractor in one tool. Multiple tools not required.
- Self centering drill tip; no walking or wandering. No grinding, center punching required.
- Can be used in quick change chucks. Easy to use.
- Tempered twice for extra hardness. Results in multiple extractions per tool.
- Made from M2 HSS. Highest quality steel used and made in the USA.
User questions & answers
| Question: | Will this be able to remove a 4mm diameter screw which the head has broken off of |
| Answer: | You might also want to check out the Grabit Micro kit http://www.amazon.com/Alden-4507P-Grabit-Broken-Extractor/dp/B000Q60UOO/ref=sr_1_1?ie=UTF8&qid=1403282910&sr=8-1&keywords=grabit+micro as it has the smallest screw removers made. |
| Question: | Need this to take the bolts out from my fender. Is this strong enough |
| Answer: | size of the bolt matters, pre soak with wd-40 to break down rust , try loosening first with wrench if screw under 1/4 inch these will work just fine, pre-drill and use remover head on electric drill, air drill is too strong and will strip out. |
| Question: | I can't figure out what grade bolts are for license plates. I have 4 of them with broken heads. Is this kit strong enough |
| Answer: | license plate bolts should not be any heavier than grade 4These extractors are the greatest, I removed broken steel bolts that the head had stripped out-follow the instructionsthey are amazing!!!! |
| Question: | will these work on 1/4" corroded stainless steel screws |
| Answer: | I just tried to use them to remove some 1/4-20 stainless flat head screws that were corroded into a piece of aluminum. The #2 tool, which is spec'd for 1/4" fasteners, broke with very little effort. Since the heads were big enough, I then tried to use the #4 tool, which is supposedly strong enough to remove 3/8" fasteners, and it broke too. I don't expect miracles from these tools but I do expect that they would strip the fastener head before breaking themselves. I consider this a design flaw and would not recommend them for really tough jobs. |
RIDGID 35585 10 Screw Extractor Set, 1/4-inch to 1/2-inch Broken Screw Extractor
Ridgid
Product description
Designed to effectively remove stripped or broken screws, the RIDGID 35585 Screw Extractor Set is a handy addition to any toolbox. The broken screw extractors are made of sturdy steel for durability and come in a pre-formed plastic box that keeps tools organized and provides convenient storage. The set includes 20 clearly marked precision tools, one each of extractor models 1 to 5 inclusive with turnuts, drill models 1 to 5 inclusive, and drill guides models 921 to 1821 inclusive. This broken screw extractor set has a 1/4-inch to 1/2-inch capacity. RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.
- Effectively removes stripped or broken screws
- Set includes 20 precision tools; extractor models 1 to 5 inclusive with turnuts, drill models 1 to 5 inclusive, and drill guides models 921 to 1821 inclusive; each precision tool is clearly marked
- Tough steel construction improves the pipe extractors' durability for extended use
- Durable, pre-formed plastic box keeps tools organized and offers convenient storage
- Set has a 1/4-inch to 1/2-inch (6 mm to 13 mm) capacity
User questions & answers
| Question: | What's the smallest screw this will remove |
| Answer: | Hello, CPO is an authorized dealer of Ridgid we would prefer you contact them directly so you can get accurate information. You can contact the Manufacturer directly at (866) 539-1710.Thank you for contacting CPO Outlets! |
| Question: | Are these a set of left-hand threads? Im looking for something like a tap and die for a stripped allen head but with reverse threading |
| Answer: | No, the drill bits are right-hand twist (i.e., "standard"), and the splined extractors are universal (they work effectively on both right- and left-handed thread fasteners). For U.S. fasteners, the set would be more effective if the drill bits were left-hand twist; by running a power drill in reverse, those bits tend to loosen up right-hand threaded fasteners, which makes them easy to remove. Right-hand twist bits tend to drive the fastener in a little deeper rather than loosen them. Regardless, though, the splined extractor is then inserted into the drilled hole. As the extractors are relatively long, you will need to drill the hole fairly deep into the fastener; a few taps with a ball peen hammer should be enough to set it. You then turn it counter-clockwise with the matching turn-nut, using a combination wrench or a deep socket and a ratchet; you could also use an adjustable wrench. |
| Question: | Where can i get a replacement no. 1 and no. 2 extractor? rigid does not offer replacements in their catalog |
| Answer: | Victor--That set must be a few years old! As you know, the storage cases (for all kinds of tools) seem to be molded plastic these days. As an aside, I received a replacement turnut (#1) because the one in my set was defective. Ridgid sent me a turnut plus a LongGrip; apparently, they are replaced as a unit. The #1 and #2 LongGrips are small diameter and were prone to breakage, which is probably why they were missing. When using them, the extractor diameter should be at least one-half (1/2) the diameter of the fastener you're trying to remove. If you use a too-small diameter extractor, the force exerted can be enough to snap it. I've thought the LongGrips are too long for many uses, and suspect they would be more effective if they were shorter (and thereby less likely to break). You can use a closed-end wrench (such as a combination wrench) on them, but if the splined extractor was shorter, you could employ a deep-well socket, an extension and a ratchet in a confined space. Another possibility would be a crowfoot or flare nut wrenchhead in tight areas. |
| Question: | Are the drill bits cobalt, and how well do they hold up |
| Answer: | Can't say for sure, based on their appearance. I looked up the Blue Point (Snap-on) equivalent set, which indicates high speed steel (HSS) drill bits are included with it. Snap-on's set runs (currently) at $128.00, so this is a good deal. All the other truck dealers (MAC, Matco and Cornwell) sell the same set, too. |
Neiko 04204A Hex Head Multi-Spline Screw and Bolt Extractor Set | 25 Piece | 1/8” to 7/8” in 1/32” Increment | Cr-Mo
Neiko
Product description
25 PC Screw Extractor Multi-Spline Hex Head Bit Socket Wrench Bolt Remover
- [PRO-QUALITY]: Premium chrome molybdenum steel industrial grade extractors are ideal for removing broken screws, bolts, nuts, studs, fittings, threaded pipes and pins and is perfect for any mechanic’s tool kit.
- [PRECISION]: Precisely machined aggressive multiplane teeth with left hand spiral design provides extra gripping power and faster threading.
- [CONVENIENCE]: High-visibility size markings on each extractor for quick selection of the right drill bit for extraction applications.
- [DESIGN]: Specially designed hexagon head for applying maximum torque with sockets and wrenches
- [INCLUDES]: 25 pieces of extractors from 1/8 inch (3.5 mm) to 7/8 inch (23 mm) in 1/32” increments and a heavy duty carrying case for storage and organization.
User questions & answers
| Question: | can you use an impact wrench with these |
| Answer: | I wouldn't recommend using an impact, I always use a breaker bar. |
| Question: | Does this set have a 7/32 socket and if not please point me towards a set with that size |
| Answer: | These are a tapered left-hand spiral thread. They are forced into a drilled hole, or the inside of a pipe, starting at 1/8 inch. They are graduated in size, so if you strip the hole in the stuck piece, you can go to the next size. I recommend using them with a universal socket, rather than a wrench, allows the extractor to center itself better. I've used this style for over 40 years. |
| Question: | Where are these manufactured |
| Answer: | These are manufactured in China |
Screw Extractor Set for Damaged Screw of 6PCS Remove Stripped and Broken Screws Drill Bit Set Made from H.S.S 4341 (Silver)
Product description
New designed in 2020 damaged screw extractor.
- PRECISE DESIGN: DBiUI screw extractor kit (#0, #1, #2, #2, #3, #4) can be used with any drill and any size of screws or bolts. Only one accessory is needed to complete drilling and extraction, help you easily extract stripped, broken, stuck or damaged screws.
- STABLE DURABILITY: The whole construction is made from H.S.S 4341#, which have high hardness of 63hrc, bring an effective and sustainable service life of product for you.
- SIMPLY PRACTICAL: Select a bit smaller than the damaged screw and insert the product into the drill, then you can easily remove the damaged screw. (Please run the drill in reverse during the process.)
- WIDELY APPLICATION: 6 stripped screw extractors come with individual box, covers most of the screw sizes you will encounter during use, highly suitable for various machinery repair work.
- EXCLUSIVE CUSTOMER SERVICE: If any problems occur during your use, please feel free to contact us, we will definitely give you a satisfactory reply.
User questions & answers
| Question: | Will this work on a bolt in a stud |
| Answer: | I used it to get a damaged screw from my Nintendo switch so probably |
Screw Extractor 5 Piece Set Titanium Plated 4341 High-Speed Steel Easily and Quickly Remove All Common Sizes of Damaged, Broken or Stripped Screws
Wyvern Products
Product description
Wyvern USA Pro E-Z Out is a 5-piece, titanium plated, 4341 High-Speed Steel broken screw extractor set in a black case.
WHY TITANIUM PLATING?
4341 High-Speed Steel is already a hard metal (typically 62-63 HRC) and used in many common tools. However, screws come in a wide range of materials and hardnesses. Titanium plating increases the hardness of the steel to help the bits penetrate tough metals, stay sharper longer and resist rust and corrosion.
WHY A 5-PIECE SET?
The 5 different size bits are designed to remove all common screw sizes.
BIT SIZE SCREW SIZE
#0 smaller than 3/32” / 3mm
#1 3/32” – 5/32” / 3-5mm
#2 5/32” – 7/32” / 4-8mm
#3 7/32” – 9/32” / 5-10mm
#4 9/32” – 3/8” / 6-14mm
HOW DO I USE IT?
Step 1: Set drill to reverse and use a slow speed at all times
Step 2: Start with the drill bit/burnishing tip and drill down 1/16th inch to create a smooth hole
Step 3: Switch the bit to the extraction tip. Using constant downward pressure on the screw and a slow speed the extraction tip will bite into the screw and extract the damaged screw.
TIPS:
*Metal shavings are created during burnishing-remove any debris before extraction
*If extractor threads don’t bite into the screw head switch back to the burnisher and
clean out more of the screw head or switch to the next largest bit size and start again with Step 2
- ✅ 5-PIECE SCREW EXTRACTOR SET - This kit includes a screw extractor bit to remove all common sizes of damaged, stripped or broken screws.
- ✅ MODERN TOOL - typically called an easy out or “EZ out”, this titanium-plated screw remover and extractor kit improves upon the traditional design with a total of 5 bit sizes and full titanium plating.
- ✅ TITANIUM PLATING - increases the hardness of each bit to help them penetrate tough metals, stay sharp longer and resist rust and corrosion.
- ✅ EASY TO USE - set your drill to reverse/counterclockwise and use a slow drill speed. Begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole. Switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw.
- ✅ MUST-HAVE TOOL - whether you are a handyman, handywoman or contractor, screws sometime get damaged or broken. Keep this set in your toolbox to get the damaged screw out and your project back on track.
User questions & answers
| Question: | Does this work for star titan screw |
| Answer: | Yes,works well. I have used these to remove screws and studs in masonry and locks. They are adequate to do the job. |
| Question: | what is the length of the extractor |
| Answer: | They should if you extract slowly. I used my set to machine screw stripped out of door frame that worked fine ,and I loaned them to a carpenter friend, he said they were the best extractor even made. |
| Question: | Where is the product manufactured |
| Answer: | These screw extractor bits can be used on all kinds of screws with following diameters: 1# for Diameter 3~5mm 2# for Diameter 4~8mm 3# for Diameter 5~10mm 4# for Diameter 6~12mm |
Topec 25Pcs Screw Extractor Set, Hex Head Multi-Spline Easy Out Bolt Extractor Set, Premium High Carbon Steel Rounded Bolt Remover
- PREMIUM INDUSTRIAL GRADE MATERIAL - Made of heat-treated high-quality high-carbon steel (chromium-molybdenum steel)，is the ideal tool for removing broken screws, bolts, studs, fittings, threaded pipes and pins
- TIGHT GRIP - Each surface is precision machined and resistant to corrosion. Internal left-handed spiral design for extra grip and faster tapping
- MULTIPLE SIZES -The easy out extractor set contains 25 different sizes, each with an eye-catching size mark, which quickly selects the right drill bit and meets almost all your needs
- MULTI-APPLICATION - The extractor set can be used to remove broken studs, bolts, hexagon socket screws and fittings, or it can be used with a hexagonal drill bit for a wider range of applications
- 100% WARRANTY - If you have any problems during using our product. Contact our Professional after-service team via email or phone calls. we will be in touch within 24 hours
User questions & answers
| Question: | Is there a warranty |
| Answer: | of course |
| Question: | Will these work on rounded bolts that are torqued and will they remove them |
| Answer: | yes |
| Question: | Do you screw this in first or screw a smaller drill then this to extract |
| Answer: | screw a smaller drill then this to extract |
| Question: | in what country are they manufactured |
| Answer: | They are manufactured in China |
Screw Extractor Screw Extractor Set - Damaged Screw Extractor Kit, Stripped Screw Remover, All-Purpose Easy Out Screw Extractor Drill Bit Set with Magnetic Extension Bit Holder & Socket Adapter,22pcs
Product description
Warm Tips:
※Must drill a hole first when the break screw surface is smooth. Otherwise, the drill bit will slip
※Must be vertical and low speed when drilling, reverse use this bit, drill the first hole deeper will easier to take out
※ It is best to use electric hand drill, can not be used the hammer drill mode! Must be low speed during use!
How to Use the Screw Extractor?
- The size of #6 - #10 needs to be installed in the socket adapter first, and then attach it to the extension bit holder (The other sizes can be attached to the extension bit holder directly)
- Use the drill (Dr) bit to drill a hole in broken screws
- Change to use the extract (Ex) bit with the same size
- Reverse use the drill and take out the broken bit
Feature:
*high quality High-Speed Steel 4341
*Suitable for any sizes screw or bolt,
*suitable for most electric hand drills
Package Included:
- 20pcs -damaged screw extractor(Ex#1 - #10, Dr#1 - #10)
- 1pc-Magnetic Extension Bit Holder
- 1pc-Socket Adapter
- 1pc-Storage box
- ※【ALL-PURPOSE Screw Extractor Drill Bit Set】: Package including 10pcs drills (Dr#1 to #10), 10pcs extractor (Ex#1 to #10), 1-piece extension bit holder and 1-piece socket adapter. In 10 different sizes to satisfy all you demand. Suitable for any sizes screw or bolt
- ※【HIGH QUALITY Damaged Screw Extractor】LandTrek screw extractor is made of high quality High-Speed Steel 4341. High hardness, durable and easily remove damaged screws
- ※【REMOVE Broken Screw IN ONE STEP】The stripped screw extractor set is included Magnetic Extension Bit Holder & Socket Adapter. Can remove in one step, do not need to conversion the extractor or adjust the chuck
- ※【WIDELY APPLICABLE】Suitable for allen bolts, machine screws, lag bolts, wood screws, hex bolts, sheet metal. And universal chuck can be applied to most electric hand drills
- ※【NOTICE】It is best to use electric hand drill, can not be used the hammer drill mode! Must be low speed & reverse use in the whole process!
Screw Extractor Screw Extractor Set - Damaged Screw Extractor Kit for Broken Screw, Upgrade Double-Side Stripped Screw Remover and Extractor, High-Speed Steel HSS 4341 (6 Pcs)
Product description
Features:
1. High-Speed Steel.
2. Suitable for general sizes and all kinds of broken bits.
3. Universal chuck that suitable for most electric hand drills.
4. Remove broken screw in one step(Do not need to conversion the extractor or adjust the chuck)
How do use it?
Step 1: Set drill to reverse and use a slow speed at all times.
Step 2: Start with the drill bit/burnishing tip and drill down to create a hole.
Step 3: Switch the bit to the extraction tip. Using constant downward pressure on the screw and a slow speed the extraction tip will bite into the screw and extract the damaged screw.
Warm tips:
- Must drill a hole first when the break screw surface is smooth. Otherwise the drill bit will slip.
- Must be vertical and low speed when drilling, reverse use this bit, drill the first hole deeper will easier to take out.
- It is best to use electric hand drill, can not be used the hammer drill mode! Must be low speed during use.
- High-quality tool steel: This damaged screw remover tool kit is made from high hardness H.S.S. 4341 (the hardness is 63hrc)alloy steel, durable for extracting stripped, broken, stuck, or damaged screws.
- Suitable for all drills: This damaged screw extractor kit works with any drill and any size screw or bolt. Complete size easy out bolt extractor set and can meet your unique needs.
- Easy to operate: Two simple steps can remove all jammed screws/bolts within 10 seconds. Only one drill bit is needed, no other tools are needed. Choose a drill bit smaller than the damaged screw to easily remove the screw. In this process, make sure to turn the damaged screw counterclockwise until it is loose!
- Powerful: Stripped screw extractor kit removes even the most stubborn stripped, damaged, embedded, rusted, and painted-over screws and bolts.
- Quality guarantee: We have carried out strict quality inspection and control on one of our broken screw adapters before they leave the factory, Your damaged screw remover set is backed by our Highest Quality Promise.
Latest Reviews
View all
Gun Vises
- Updated: 07.06.2023
- Read reviews
Cep Compression Socks Runnings
- Updated: 09.04.2023
- Read reviews
Chalk Lines
- Updated: 18.06.2023
- Read reviews
Game Pools
- Updated: 01.04.2023
- Read reviews
Postal Scales
- Updated: 18.01.2023
- Read reviews