13 best bolt extractors

Product description

REXBETI Bolt & Nut Remover

• Made of high hardness chrome molybdenum steel for durability
• All the bolt extractors are precision engineered to easily extract damaged bolts, nuts and screws even if they are stripped, rusted or frozen
• Tight grips and won’t let go, the internal thread design provides excellent torque, the more you turn, the tighter the socket grips
• 13 pieces 3/8 inch drive bolt & nut remover comes with 3/4"(19mm), 11/16", 17mm, 5/8"(16mm), 9/16"(14mm), 13mm, 1/2", 12mm, 7/16"(11mm), 10mm, 3/8", 5/16"(8mm), 1/4"
• Heavy duty blow molded case lets all the bolt remover stay organized

User questions & answers

Question:	How long are these nut extractors
Answer:	Dear Customer, The rake head is made of plastic. It is strong enough to deal with the raking job. SIC Customer Service Team
Question:	Will this product work on a stripped bolt with no threads on the bolt
Answer:	As described in the picture, this 22 tines rake is 21 inches wide.
Question:	Will any of these sockets work well on a 15mm nut? I see that 5/8"(16mm), 9/16"(14mm) so it seems that 15mm is a no go... Thanks
Answer:	Dear customer, Please find below product dimensions, best regards. Product Dimensions: 2.5 x 22.5 x 66.2 inches Item Weight: 3.4 pounds
Question:	where are they made
Answer:	It is a heavy rake, with a fat handle. It will tire your arms out and give you a good workout, but it sure is goid for thatch raking.

Product features

Superior Connection

Made of high hardness chrome molybdenum steel for superior durability, all the extractors have special thread designed to bite into a rounded bolt head for amazing grip power on even painted or rusted nut

Standard 3/8 Inch Drive

Not only can you use the extractors on hand tools, you can easily use them with any 3/8 inch air or power tools

Hard Case for Storage

Heavy duty blow molded case keeps all the bolt removers in place

• PREMIUM INDUSTRIAL GRADE MATERIAL - Made of heat-treated high-quality high-carbon steel (chromium-molybdenum steel)，is the ideal tool for removing broken screws, bolts, studs, fittings, threaded pipes and pins
• TIGHT GRIP - Each surface is precision machined and resistant to corrosion. Internal left-handed spiral design for extra grip and faster tapping
• MULTIPLE SIZES -The easy out extractor set contains 25 different sizes, each with an eye-catching size mark, which quickly selects the right drill bit and meets almost all your needs
• MULTI-APPLICATION - The extractor set can be used to remove broken studs, bolts, hexagon socket screws and fittings, or it can be used with a hexagonal drill bit for a wider range of applications
• 100% WARRANTY - If you have any problems during using our product. Contact our Professional after-service team via email or phone calls. we will be in touch within 24 hours

User questions & answers

Question:	Is there a warranty
Answer:	of course
Question:	Will these work on rounded bolts that are torqued and will they remove them
Answer:	yes
Question:	Do you screw this in first or screw a smaller drill then this to extract
Answer:	screw a smaller drill then this to extract
Question:	in what country are they manufactured
Answer:	They are manufactured in China

Product description

The IRWIN HANSON Spiral Extractor and Drill Bit Set, 10 Piece, features an aggressive left hand design for extra gripping power. Easy out style spiral flutes embed themselves deeper into the metal as the tool is turned so grip increases as resistance increases. With sizes etched onto each tool for quick identification, it includes EX-1, EX-2, EX-3, EX-4, and EX-5 extractors; 5/64", 7/64", 5/32", 1/4", and 19/64" drill bits and a metal index case.

• Designed to remove broken studs, bolts, socket screws, and fittings
• Aggressive left hand spiral design for extra gripping power
• Easy out style spiral flutes embed themselves to increase grip as resistance increases
• Extractor size and recommended drill bit size are etched on each tool
• Set includes spiral flute screw extractors sizes EX-1, EX-2, EX-3, EX-4, EX-5; drill bit sizes 5/64", 7/64", 5/32", 1/4", 19/64", and a metal index case

User questions & answers

Question:	Are the bottom of the reverse drill bits hexagonal or smooth
Answer:	The reverse drill bit it smooth. The extractor is square.
Question:	made in USA
Answer:	Made in USA of "foreign components."
Question:	Can someone tell me where these are made, what does it say on the box? TY
Answer:	They seem to be made in several places, I assume the case was made in China. The left hand drill bits are stamped Brazil, and the extractors say USA.
Question:	Are these left-handed drill bits as well? If not they should be a lot of time when the drill bit bites the screw comes out
Answer:	Just to be clear, 'Bob Vila "Tool Junkie"' is evidently describing a different tool than the one I see currently, and the one other answers to this question are talking about. The current picture shows a set of drill bits along with the spiral extractors — NOT the square type that 'Bob' is talking about. And if you look closely at the drill bits, you can see that they spiral in the opposite direction compared to standard drill bits. That is to say, these are left-handed drill bits.

Product features

IRWIN HANSON Spiral Extractor and Drill Bit Set, 10 Piece

IRWIN HANSON Spiral Extractors and Drill Bits have spiral flutes that embed themselves deeper into metal as they drill. This aggressive design increases grip as resistance increases to generate even more fastener-removing power.

Frees Fasteners Fast

The IRWIN HANSON 10 Piece Kit gets the most commonly used fastener sizes unstuck quickly and efficiently.

10 Sizes

The perfect starter set for extracting fasteners, this set contains 5 extractors and 5 drill bits.

Aggressive Design

Reverse spiral fluting digs deeply into stubborn fasteners with extra gripping power.

Etched Sizes

Finding the exact tool you need is easy with sizes etched onto each extractor and drill bit.

• ABOUT THE TOOL: This damaged bolt and stud extractor tool is 3/8-inch drive and can be used with manual or pneumatic impact wrenches and ratchets. The hexagonal flat can also be used with flat wrenches, adjustable wrenches, sockets, and locking pliers. Manufactured with high-grade Heat-Treated Alloy Steel for maximum durability, this tool also features a chrome finish for additional rust protection.
• MULTIPLE USES: This bolt extractor will save hours of frustration on broken exhaust manifolds, oil filler plugs, rounded starter bolts, low grade bolts left in saltwater, painted-over bolts, rusted tight bolts and more.
• TRADITIONAL BOLT EXTRACTORS: Traditional bolt extractors force the user to guess which size the damaged stud is. They have a tendency to strip the screw even more and shave metal off without budging the screw, leaving you worse off than when you started. The design of this bolt extractor allows you to clamp down on the damaged stud, eliminating the guess work.
• RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Damaged Bolt and Stud Extractor Tool, simply contact customer service for troubleshooting help, parts, replacement, or refund. Need a manual? Download it for free on our website!
• ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we’re proud to help this great organization.

User questions & answers

Question:	Says gets tigher the more pressure you put on it. which direction? clockwise or counter? cuz the thing i need to take out comes out clockwise
Answer:	Don't know the exact weight but it's definitely heavier than a run of the mill rake. It's worth the extra weight though because in my opinion it's an excellent rake. I've used it several times to de-thatch my lawn and it works great. But maybe too heavy and firm if for just leaf raking.
Question:	will it work on a left hand thread
Answer:	Yes they are and a very good rake. Thanks, Jackie
Question:	Is there a version that can attach to smaller studs
Answer:	It's a little of both. The bar that separates the tines is steel, and the mounting plate and screws for the locking mechanism are also metal. The handle lock and the barrel that mounts it to the main handle are both hard plastic. I have a small to medium sized yard, so it suits my needs perfectly. If you have a huge yard, you might want to go with something a little larger. But in my opinion, for the size and the price this is a very well-made rake.
Question:	Can this be used with an impact wrench
Answer:	Yes, it is! I found that if I adjust it to a smaller "footprint" it handles the grass clippings very well. I leave it wider to get the tree sticks, small branches, and dog "gifts" and then make it smaller for the finer things like grass clippings and leaves.

Product features

The Right Fit for a Wide Variety of Applications

You can use this versatile 3/8-inch drive damaged bolt and stud extractor with manual or pneumatic impact wrenches and ratchets. You can also use the hexagonal flat with flat wrenches, adjustable wrenches, sockets, and locking pliers. Its compact design will help you access tight spaces where studs may be hard to reach. Whether you're working on broken exhaust manifolds, oil filler plugs, rounded starter bolts, low grade bolts left in saltwater, painted-over bolts, or rusted tight bolts, this handy tool will be the right fit every time.

Quality You Need

This damaged bolt and stud extractor is made of high-grade Heat-Treated Alloy Steel for maximum durability with a chrome finish for additional rust protection. Thanks to its universal design, this bolt extractor allows you to clamp down on the damaged studs and bolts, without having to guess the size. You'll be able to depend on this tool to work where and when you need it.

Product description

BOLT EXTRACTOR

• Made of high-hardness chromium-molybdenum steel for durability
• All the bolt extractors are precision engineered to easily extract damaged bolts, nuts and screws even if they are stripped, rusted or frozen
• Tight grips and won’t let go, the internal thread design provides excellent torque, the more you turn, the tighter the socket grips
• 13 pieces 3/8 inch drive bolt & nut remover comes with 3/4"(19mm), 11/16", 17mm, 5/8"(16mm), 9/16"(14mm), 13mm, 1/2", 12mm, 7/16"(11mm), 10mm, 3/8", 5/16"(8mm), 1/4". Also this bolt extractor tool set includes a 3/8-inch reversible ratchet, a 1/4-inch adapter and a striking tool ( If the broken screw is stuck in the remover, you can use the hammer and the strking tool to knock it out
• All pieces are housed in a compact carrying case for storage and portability

User questions & answers

Question:	Where is is made
Answer:	the depth is about 1" deep !!
Question:	Are these impact rated
Answer:	No it does not. This thing last me 2-3 days a charge and charges fully in about 30-45mins

Product features

Superior Connection

Made of high hardness chrome molybdenum steel for superior durability, all the extractors have special thread designed to bite into a rounded bolt head for amazing grip power on even painted or rusted nut

3/8-inch Reversible Ratchet

Comes with a long handle 3/8-inch reversible ratchet, a 1/4-inch adapter and a striking tool. If the broken screw is stuck in the remover, you can use the hammer and the striking tool to knock it out.

Comapct Case

All pieces are housed in a compact carrying case for storage and portability

• 【High Quality】: This Bolt nut extractor socket sets and drive are made of durable high hardness chromium molybdenum steel; with black oxide surface provides greater strength and durability and prevents corrosion.
• 【Tight grip and bit】Spiraled and fluted taper on sockets interior are designed to provide maximum gripping power for easily removal. Reverse spiral flutes grip harder as resistance increases for maximum grip power, the more the rotation, the tighter the grip, the easier it will not break or slip.
• 【Wide Compatibility】The set comes with a carrying case and 13 extractors to remove bolts sizes：1/4", 5/16"(8mm), 3/8", 10mm, 7/16"(11mm), 12mm, 1/2", 13mm, 9/16"(14mm), 5/8"(16mm), 17mm, 11/16", 3/4”(19mm) in drive size 3/8 inch.
• 【Easy to Use】Coming with a 3/8” square drive and a 3/8" to 1/4” hex adapter fit with socket wrench or impact wrench, manual ratchet, universal joint, etc.
• 【Artipoly’s guarantee】We’re aimed to provide you superb quality tools If you have any issues with our product, feel free to contact us for troubleshooting help, parts, replacement, or refund.

User questions & answers

Question:	Will the bolt extractor rust or corrode in a wet environment
Answer:	My nuts were all regular nuts that were stripped. I haven’t tried wheel locks. I set the socket with a half inch drive by four inch extension and twenty four ounce ball peen hammer. The socket didn’t lose any bite after all twenty four nuts were removed from my F-150. Locks are generally chromed which is very hard. Try turning the nut with a breaker bar and socket while hitting the joint of the breaker bar. That is what I did.
Question:	Will the black steel rust
Answer:	No. I don't think you can buy just the 13 mm socket.
Question:	What is the thickness? I am not sure how much space between the bolt and other components
Answer:	Although not Recognizable name brand, this a very high quality set. Made of hardened tool steel. Fluted inside just like the sets costing 3-4 times the price.
Question:	Do I need a wrench or does this come with one
Answer:	I purchased this set when I stripped one of the 13mm bolt nuts when installing a new sport exhaust on my Porsche. Two of the bolts wound up being so corroded I had to use the 12mm and 10mm remover as well. The set worked like magic. On the nut I stripped I used the same size remover as the original nut. In other words 13mm-13mm. On the 2 that had deteriorated I had to drop in size. If you are removing a 15mm bolt that you stripped, you would use a 15mm removal tool.

Product description

Comoware Left Hand Drill Bit Set and Screw Extractor 10 Pieces

Material: Left Hand Drill Bits: HSS, M2

              Screw extractor: Carbon Steel

Specifications:  5pcs left hand drill bits: 5/64", 7/64", 5/32", 1/4", 19/64"

5pcs alloy steel screw extractors: #1, #2, #3, #4, #5 

Angle Point: 118 Degree

Flute Type: Spiral

Shank Type: Straight Shank

• EASY OUT REMOVING: It is more convenient and easy to remove the broken screw from the damaged workpiece by using the left hand drill bit which coordinates with the screw extractor. Spiral groove on screw extractor can go deep into screw to increase grip force to remove studs, screws and bolts around the house, garage or on your job project.
• HIGH QUALITY CARBIDE MATERIAL: The left hand drill is made of HSS M2. Compared with ordinary high speed steel, M2 material can prolong the service life, enhance wear resistance and remove chippings clearly. HSS are harder and tougher than other materials.
• UNIQUE DESIGN: The 118°angle makes it easier to cut into the workpiece with small axial resistance. This design can not only increase the length of cutting edge work but also decrease the nominal thickness of cutting layer, which improves heat dissipation and durability with better cutting effect.
• CONVENIENT ORGANIZATION AND STORAGE: Come with a metal index case, convenient to use and carry.
• SET INCLUDING: 5pcs alloy steel screw extractors and 5pcs HSS M2 left hand drill bits. Screw extractor includes #1, #2, #3, #4, #5. Left hand drill bit model includes 5/64", 7/64", 5/32", 1/4", 19/64".

User questions & answers

Question:	Does it include turning tool
Answer:	No
Question:	Can this make holes in a table top
Answer:	No, you will need a hole saw.
Question:	Can the small extracter work to remove the small screws on a Nintendo switch
Answer:	No
Question:	Can this be used to extract a steel screw in a brake rotor
Answer:	Yes, be careful when drilling. A left hand drill bit works perfectly

Product features

COMOWARE Screw Extractor & Left Hand Drill Bit Set

Specifications: 5pcs left hand drill bits: 5/64", 7/64", 5/32", 1/4", 19/64"

5pcs alloy steel screw extractors: #1, #2, #3, #4, #5

Angle Point: 118 Degree

Flute Type: Spiral

Shank Type: Straight Shank

STEP 1

Use Tools drill to pre-drill a pilot hole in the broken bolt prior to extracting.

STEP 2

Left hand drills ensure the broken bolt or screw is not tightened in the hole.

STEP 3

Change to use the extract(Ex) bit with the same size

STEP 4

Reverse use the drill and take out the broken bit

Product description

NEW ARRIVAL ⚡⚡⚡ Werkzeug change the traditional ideas and devoted to studying professional broken bolt extractor

✅ High-Speed Steel 4341

✅ Suitable for general sizes and all kinds of broken bits

✅ Universal chuck that suitable for most electric hand drills

✅ Remove broken screw in one step(Do not need to conversion the extractor or adjust the chuck)



How to Use the Screw Extractor?

1. The size of #6 - #10 needs to be installed in the socket adapter first, and then attach it to the extension bit holder (The other sizes can be attached to the extension bit holder directly)

 2. Use the drill(Dr) bit to drill a hole in broken screws

 3. Change to use the extract(Ex) bit with the same size

 4. Reverse use the drill and take out the broken bit



Warm Tips :

- Must drill a hole first when the break screw surface is smooth. Otherwise the drill bit will slip

- Must be vertical and low speed when drilling, reverse use this bit, drill the first hole deeper will easier to take out

- It is best to use electric hand drill, can not be used the hammer drill mode! Must be low speed during use!



Package Included:

20*Werkzeug damaged screw extractor(Ex#1 - #10, Dr#1 - #10)

1*Magnetic Extension Bit Holder

1*Socket Adapter



Werkzeug - Your Professional Tool House

We are committed to providing the best quality products, and largely dependent on product feedback from wonderful customers such as yourself.

✦✦✦If you have any questions or concerns about our product, please do not hesitate to contact us, we always here to service you.

• 【Damaged Screw Extractor】Werkzeug screw extractor is made of high quality High-Speed Steel 4341. High hardness, durable and easily remove damaged screws
• 【In one step】The stripped screw extractor set is included two extension bit holder. Can remove in one step, do not need to conversion the extractor or adjust the chuck
• 【Extremely Versatile】The stripped screw extractor kit is includes 20 pieces of stripped screw extractor in 10 different sizes to satisfy all you demand. Suitable for any sizes screw or bolt
• 【Multipurpose】Suitable for allen bolts, machine screws, lag bolts, wood screws, hex bolts, sheet metal screws and other screws
• 【Important】It is best to use electric hand drill, can not be used the hammer drill mode! Must be low speed during use!

User questions & answers

Question:	Smallest size
Answer:	As long as the screw is large enough.
Question:	Hi, will this work on an 1/8 inch Hex bolt
Answer:	These four bits did not fit into my screw driver that accepts bits. I do think you have a better than even chance to remove a lap top screw. You can also get a carbide tipped drill of the right diameter and just drill the screw out. Make sure you don't use to big a diameter or you won't get a new screw into it.
Question:	Where is this manufactured? Avoiding Chinese products like the inferior screws I'm needing this for
Answer:	The smallest BIT 1 has DRILL side thickness 2.8mm and Extractor side thickness 2.5mm. Anything over 3mm is doable considering its done correctly and as Dave said it should be centrally aligned.
Question:	Would this work on a stripped screw head on an external hard drive
Answer:	If you can fit the smallest extractor in your screw it will. It doesnt even need to go fully in. I extracted a small phillips head screw on a car starter that was not only torqued in hard but had been "weathered" into place over 150,000 miles of road & weather. I got the tip of the smallest one in about 1/3 to less than 1/2 way of its height and it bit in & got the screw out. Dont use a drill, its fast spin could strip the screw or extractor. I used a 1/4 ratchet and socket but I had a set that had the fine spiral threads on one end & 1/4 socket interface on the other. You could use pliers or vise grips with these on small screws. A very gentle tap can set it in place & in less than 2 turns it should fully bite in and back out the screw, these are fantastic removers.

Product description

grip tite sockets lug nut extractor rounded bolt remover impact bolt extractor metric bolt extractor set

• High Power and impact resistance - Bolt nut remover Processed from high hardness chrome molybdenum steel, Reverse spiral flutes are designed to bite down to provide Maximum gripping power.
• Tight grip and bit - The special internal thread design provides excellent torque and can be used to rotate fasteners with deep nails. The inner non-smooth concave wall helps to grasp the stubborn nut, and the more the rotation, the tighter the grip, the easier it will not break or slip
• Surface Painting Process -These broken bolt extractors have Black oxide surface provides greater strength and durability and prevents corrosion.
• Multi-functional - The twist socket set is suitable for removing rust and wear, as well as covering the paint coating of nuts, bolts. The size:1/4”,5/16”(8mm),3/8”,10mm,7/16”(11mm),12mm,1/2”,13mm,9/16”(14mm),5/8”(16mm),17mm,11/16”,3/4”(19mm), include the 3/8 "to 1/4"hex adapter
• Premium Service - If you have any problems during using our product. Contact our Professional after-service team via email. Topec Direct after-sale Team will get in touch with you and timely solve your problems

User questions & answers

Question:	The head broke off the bolt will it grip the threads and turn them
Answer:	Yes. This item is all one piece, very sturdy. Comes in a giant box.
Question:	they are made in usa
Answer:	Thanks so much for the question - the handle is designed to be straight and should not be bent. All of us at Corona take pride in the products we make and truly want our customers to have the best experience possible, so please return the tool for an exchange or feel free to contact us, Corona Tools USA, for assistance. I have linked our website below with our contact information page. Hope this helps! We appreciate your business and look forward to serving you in the future. Thank you for shopping Corona products! http://www.coronatoolsusa.com/contact/ 800-234-2547.
Question:	will this get a wheel stud lock off
Answer:	It was a little awkward to measure, but it is approximately 52 inches long from tip of handle to where the rake is attached
Question:	What size wrench does the outside of the extrtactor tool require. From the pictures it appears 2 or 3 sizes can be used. I dont care to use channelo
Answer:	On Amazon: Flexrake 3F Shrub Rake Head Only... about $10 for just the metal rake head which will connect to any wood or metal pole. If you do your bed cleaning on your hands and knees and need just a shorter 3 foot shrub rake, Lowes sells a "childrens" garden rake -- about $7-- which is a short version of the longer handle shrub rake.

Product description

ROCKETSOCKET is the original and best damaged fastener removal socket. Designed, engineered and manufactured in the USA with American Drawn Steel. ROCKETSOCKET features RAZORGRIP Extraction Technology with helical teeth that grip and don't let go to easily and quickly remove frozen, rusted, stripped, or rounded-off nuts, bolts and screws

• MADE IN AMERICA WITH AMERICAN DRAWN STEEL - Every ROCKETSOCKET impact grade extractor socket is designed, engineered and manufactured in the USA with American Drawn Steel to meet or exceed all professional tool standards. Don't be fooled by quality claims from cheap "imported" extractor sockets. Our sockets extract nuts, bolts & screws that are rusted, worn, painted over even fully stripped. Always trust the original and the best, Trust ROCKETSOCKET!
• REMOVES STRIPPED, DAMAGED & BROKEN FASTENERS – Every ROCKETSOCKET is precision engineered to easily extract damaged bolts, nuts and screws even if they are stripped, rusted, rounded-off or frozen. Our Socket sets with RAZORGRIP provide excellent torque, the more you turn, the tighter the socket grips. The set comes in a heavy duty blow molded case that keeps all the sockets in place. You can depend on ROCKETSOCKET quality to make every job faster, safer and a lot less frustrating!
• SUPERIOR REMOVAL TECHNOLOGY – Only ROCKETSOCKET has proven RAZORGRIP Extraction Technology with helical teeth that grip and won’t let go. With ROCKETSOCKET bolt extractors make sure that you’ll be able to continue working on even the most challenging projects. With proven RAZORGRIP Extraction Technology, the more you turn, the more torque is applied and the tighter the socket grips! That means no more slipping and no busted knuckles, just fast and safe removals everytime.
• IMPACT STRENGTH – Because ROCKETSOCKET is designed, manufactured and engineered to be used with your favorite power tool or impact wrench we include a convenient 3/8" hex adapter with this set. This 13 piece set uses a 3/8" drive and covers 20 of the most used and requested standard (SAE) and metric (mm) sizes specifically: SAE: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4" Metric: 6mm, 8mm, 10mm, 11mm, 12mm, 13mm, 14mm, 16mm, 17mm, 18mm, 19mm.
• LIMITED LIFETIME WARRANTY Not all lifetime warranties are the same despite the claims. ROCKETSOCKET uses only the highest quality American materials and precision tooling so we can offer a true LIMITED LIFETIME WARRANTY on every socket and socket set we sell! We are committed to providing the most reliable products with the best service to each and every customer. If you ever have a problem with any item, just contact us through the Amazon platform.

User questions & answers

Question:	How deep are the wells on these sockets? Do you have any plans to produce a deep-well version of these sockets
Answer:	The depth ranges from approximately 3/4" to 1" depending on the size. We are considering new product offerings as the demand dictates. Deep well sockets are not in production consideration yet. Thanks for the inquiry! ROCKETSOCKET TEAM!
Question:	Will these remove a 18mm differential fill plug
Answer:	Thanks for the inquiry. Yes they will. Depending on the damage of the lug, you might have to try different sizes to get a good fit for the grip. Gene from ROCKETSOCKET
Question:	Are you planning on making a 15mm
Answer:	There is not one in production as of yet, but we continue to look at the demands of sizes and sets needed. Thanks for the inquiry. ROCKETSOCKET TEAM!
Question:	Do you guys plan on making a 22mm socket
Answer:	We are continuing to add to our product offering. The 22 mm is being considered, but it will be a couple of months. We proudly promote American made tools, and we are certain SK offers that size if you need it soon. Thanks for the inquiry, ROCKETSOCKET!

Product features

Proven RazorGrip superior removal technology

RazorGrip extraction technology grips and doesn't let go. Cheap imported sockets can slip under pressure. With proven RazorGrip Technology the more you turn the tighter the socket grips. That means no slipping and no busted knuckles.

Convenient Carry Case

The 13 piece ROCKETSOCKET bolt extraction kit comes in a protective carrying case for safe and convenient storage. No loose or hard to find sockets rolling around your toolbox when you need them. The ROCKETSOCKET case also holds the included hex adapter for power tools and impact wrenches PLUS a Knockout Pin to easily unlodge nuts, bolts & screws after a successful removal

A MUST have tool!

ROCKETSOCKET is a must have tool for every homeowner as well as the professional handyman, car or boat mechanic, building contractor, carpenter, woodworker, or anyone who encounters damaged, stripped even rusted and frozen fasteners like nuts, bolts and screws. If you only want the best, then you only want ROCKETSOCKET.

The Original with Proven Removal Technology

Don't be fooled by claims of quality and technology from foreign import offerings. ROCKETSOCKET uses proven RazorGrip EZ-OUT extractor technology to remove stubborn damaged fasteners including bolts, nuts and screws. ROCKETSOCKET uses only the highest quality materials and is the best performing extractor socket set on the market today!

Product description

bolt extractor set bolt extractor bolt remover nut removal tool rocket socket stripped lug nut remover twist socket set extractor socket rounded bolt removal sockets.

• Each bolt extractor is made of high hardness chrome-molybdenum steel for superior durability and longer life. It will easily extract damaged bolts, nuts, and screws even if they are stripped, rusted, or frozen.
• The internal thread with reverse spiral flutes design to bite down to provide maximum gripping power, the more you turn, the tighter the socket grips.
• Standard 3/8-inch drive and hex adapter to let the extractors compatible with common to heavy-duty power tools, drivers and screwdrivers handle tools.
• 13 pieces 3/8 inch drive bolt & nut remover comes with 3/4"(19mm), 11/16", 17mm, 5/8"(16mm), 9/16"(14mm), 13mm, 1/2", 12mm, 7/16"(11mm), 10mm, 3/8", 5/16"(8mm), 1/4", and hex adapter.
• Heavy-duty blow-molded case lets all the bolt remover stay organized and take your set on the go.

User questions & answers

Question:	Can you use it on a counter clock wise nut
Answer:	Our this set adds several sizes to meet all your needs
Question:	Will this work on a reverse thread (left hand) nut? Or does the manufacturer sell a product that will
Answer:	The socket are made of High-carbon steel
Question:	Are they life time warranty
Answer:	3/8 size ratchet wrench
Question:	What is the depth of the 1/2"drive set
Answer:	China I believe

Product features

Standard 3/8 Inch Square Drive

All the extractors can be used by hand tools or any 3/8-inch air and power tools.

Superior Connection

Made of high hardness chrome molybdenum steel for superior durability, all the extractors with special thread designed to bite into a rounded bolt head for amazing grip power on even painted or rusted nut.

1/4" Hex Shank Socket Adapter

1/4" Hex adapter let the extractors compatible with common to heavy-duty power tools, drivers and screwdrivers handle tools.

Organized Storage

All the extractors are well packed in a heavy-duty blow-molded case for secure storage and easy carry.

Product description

Specification:

Material: Chrome vanadium steel



Extractor Diameter:

#1 for 1/8"-1/4" (3-6mm)

#2 for 1/4"-5/16"(6-8mm)

#3 for 5/16"-7/16"(8-11mm)

#4 for 7/16"-9/16"(11-14mm)

#5 for 9/16"-3/4"(14-18mm)



Drill Bit Diameter:

#1: 5/64" (2.0mm)

#2: 7/64" (3.0mm)

#3: 5/32" (4.0mm)

#4: 1/4" (6.5mm)

#5: 19/64" (7.5mm)



Package includes:

5 x Drill Bits

5 x Extractors

1 x Tap Holder

1 x Storage Case



Instructions:

1. The thread direction of the screw is positive, while the thread direction of the broken wire extractor is reverse.

2. When the broken wire extractor is turned counterclockwise, it is continuously tightened into the inner hole, and the screw rotates when it reaches a certain degree of tightness.

3. Because the screw is turned in the opposite direction, the broken bolt is naturally screwed out.(The 3mm screws may be difficult to operate)



Please read the description clearly.

• Made from Chrome vanadium steel, High hardness
• Drill bits' diameters and recommended extract diameters of broken screws are etched on case
• Aggressive left handed(extractors) and righted handed(drill bits) spiral flute design for extra gripping power
• Ideal to remove damaged, rusted or stripped screws, studs, bolts, fastener, metal water tap and water tube, etc
• Note:First drill a dragon on the broken screw with an electric drill, then gently tap the extractor into the hole and use a wrench to rotate counterclockwise to take it out

User questions & answers

Question:	Are the drill bits left handed
Answer:	In this kit you provide the bits. Not much affordable in left hand threads. This is taps and tap handle only. They arent anything to write home about but do work. That in itself says something
Question:	Can this be used on smaller electronic screws
Answer:	This set is suitable for m3-m12

Product description

First of all, our product hardness is 64 HRC-65 HRC, if the damaged screw hardness is higher than that, which will make the extractor bit shear off into bolt easily. Please contact Jellas first when you decided to purchase. We will tell if this product suits or not. Another important thing is that you should be careful of the working speed of the electric drill, and should keep the speed under 200 rpm, as the bit may break for high speed use. Also you can use a wrench to extractor. The lower speed, the better, which will also help you not make the frictional locking force out of control and protect the screw extractors not breaking.

• [Technology-Leading] - Jellas 22pcs damaged screw extractor set made by HSS material can create more extraction possibilities for broken screws or bolts of different sizes (2-12mm) and can work on irregular and jagged irregular cuts; Extra gift of 2 common sizes (#3 & #6) enhances the longer service life of the product
• [Most Cost-effective] - HSS material with maximum protection against rust and corrosion, hardness can reach 64.5 HRC for strength, flexibility and durability; The notches on the extractor bits produce greater force for bolts that are difficult to remove; Aluminum box packaging, delicate and durable, can be presented as gifts to friends and relatives
• [Switching Tips Freely] - With the support of extension tips and a socket adapter, the separately designed burnishing tips and extraction tips allow for switching at will without wasting time and energy
• [Meet Any Requirement] - The extension bit holder (6.35 mm) and the socket adapter (4 mm) of the screw removal set fit all electric drills of any brand; The magnetism inside the support and the adapter prevents the tips from falling
• [Simple to Use] - The manual is included, everybody knows how to use; Separated burnishing tips (for perforation) and extraction tips simplify the working process, it is not necessary to turn the extractor upside down and rotate the drill holder again to extract

Product features

JELLAS Damaged Screw Extractor

Designed Tools seed New Stories

If you forget the pilot hole or drive a screw too quickly, a power screwdriver can spin its bit fast enough to strip away the cross or other shape in a screw. Once that’s gone, the screw can’t be driven deeper or backed out. For screws where the stripped screw head rests flush with the wood (and you don’t want to risk damage to your project), then you may need a screw extractor.

Jellas 22 pieces extractor screws to extract screws made of advanced High Speed steel (H.S.S), twice tempered for extra hardness and is up to 64-65HRC; It can extract screws from 2 to 12 mm. Our screw extractor set works with any drill and any size of screw or bolt, great for those stubborn, broken, blocked or damaged and also for simple removal of screws, Jellas Screw extractors are designed to help you with that.

Attentions

The screw extractor is to keep the frictional locking force between the #drill/#extr bits and the damaged screws under control which will take a few more times if you are a new user.

First of all, our product hardness is 64 HRC-65 HRC, if the damaged screw hardness is higher than that, which will make the extractor bit shear off into bolt easily. Please contact out seller center first when you decided to purchase. We will tell if this product suits or not. Another important thing is that you should be careful of the working speed of the electric drill, and should keep the speed under 200 rpm, as the bit may break for high speed use. Also you can use a wrench to extractor. The lower speed, the better, which will also help you not make the frictional locking force out of control and protect the screw extractors not breaking.

Instructions for Use

Drilling the Screw

Step1, It is better to use a drill rather than a screwdriver.

Step2, Please press the reverse button on the drill to prepare the electric drill for use.(Don’t need to reset the reverse button the whole process.)

Step3, Select a drill bit slightly smaller than the screw. Hold the drill bits up to the screw or fastener you need to remove. The right one will be slightly less wide than the screw head. When you find the right one, attach it to your drill.

Step 4, Line the drill bit up with the center of the screw. Place the drill bit in the divot you created earlier. Move slowly as you begin to drill. Too much force will damage the screw. Focus on holding the drill bit steady so it drills straight down into the screw head.

Step5, Drill a hole for the extractor. You will need to drill somewhere between 1⁄8 inch (3.2 mm) and 1⁄4 inch (6.4 mm) into the screw head. The depth depends on the screw extractor you have. Hold up the extractor to compare it to the hole you drilled. If the extractor doesn’t fit, keep drilling to widen the hole.

Pulling out the Screw

Step1, Insert the extractor into the drilled hole. The spiral end of the extractor goes into the hole. You can tap it with a hammer to make sure it’s in there, but don’t force it. The loose end should have a tap handle, which looks like a T, for you to hold onto. Twist the extractor counterclockwise until you can’t turn it anymore.

Step2, Twist the extractor with a wrench or drill. Grip the top of the extractor with a wrench. Continue to twist it counterclockwise until the screw pops free. Many extractors are designed to work with drills. Attach the free end of the extractor to the drill and turn on the drill to turn the screw counterclockwise. It’ll come out without much resistance.