11 best hole punch machines

• ✔【Great Value for Money】Our binding machine come with 100pcs of 3/8'' black 21-ring PVC comb bindings in the package ----- ➤Max binding capacity: 450 sheets (2'' comb plastic bindings ) ----- ➤Max punch capacity: 12 sheets of 80g(≈20lb) paper
• ✔【Humanized Design, Light but sturdy】Durable Metal Construction for Long-Lasting Use. ➤Tips: This binding machine comes with oiled cutting blade for protecting the punch die away from rusting. To avoid staining on the important document, please use oiled removing paper(enclosed) to punch first in order to clean up the blades.
• ✔【Easy and Safe to Use】Manual Punching and Binding Operation Only Need 2 steps! Low force handle simplifies punching. Sturdy metal construction, non-slip feet and easy to use. Punching and binding add a professional finish to presentations, handbooks, proposals or sort out the office document management.
• ✔【Marks of A4/A5/Letter Size & Adjustable Edge Guide】This UPGRADED comb binding machine is suitable for Letter Size (19 holes), A4 Size (21 holes), A5 Size (15 holes). Enhanced accuracy edge guide from 3mm to 5mm for pinpoint punching. Adjustments can be made with ease.
• ✔【Strict Quality Control 】Every batch of Makeasy binding machine had been tested before packing. Our friendly and reliable customer service team will respond to you within 24 hours! You can purchase our products with full confidence.

User questions & answers

Question:	Can this binding machine fit us paper such as letter size or legal size
Answer:	The machine I have only fits letter size.
Question:	Can you remove or fold down the handle for storage
Answer:	Yes, the handle can easily be removed for storage. there is a thumb wheel that holds it on.
Question:	Will this punch through laminated paper
Answer:	Yes it will
Question:	will this bind two ways, not just the long (11") side, but can you bind it on the top shorter (8 1/2) side
Answer:	Yes. You could punch the holes along the top and bind the top. It comes with some combs that could work. I have used them and then cut off the extra length with scissors.

Product features

Step 1

Insert the Paper Carefully and Press the Handle to Punch.

Step 2

Place the Comb Ring and Push the Handle Back to Open the Comb Ring.

Step 3

Place the Perforated Paper on the Comb Ring and Pull the Handle Back.

• This Leather Hole Puncher is a Heavy Duty Leather Stamping Machine for DIY Leather Craft Punching Holes. Mainly Aimed at Leather Handcraft Workers for Punching, Pronging and Stamping Process;
• Work Table with Scale to Help Locating. Equip with Drill Chuck, it Could Achieve Punching, Pronging, Stamping and Other Similar Functions by Clamping Various Tools;
• With Labor-saving Spring, Press Repeatedly without Fatigue and Easy to Operate. High-strength Hexagon Socket Screws, more Durable and Firm, Improving Working Efficiency and Quality;
• Machine Stamping Instead of Beating Prongs with a Hammer, Safety of Operation and Avoided Knocking Action, Smaller Noise, will Not Affect Other People;
• Fasttobuy Provides Professional and Efficient Customer Service to All the Customers. You Can Find Many Other Leather Craft Machine and Tools Easily in Our Store. 【Note: The prongs on the photo are not in the package, need extral purchase!】

User questions & answers

Question:	Will this hole puncher set rivets to leather
Answer:	It's used to lock it closed
Question:	Does this work for stamping letters
Answer:	Yes it should, it leaves a clean hole in a leather belt so there should be no reason for it not to leave a clean hole in cardboard
Question:	Hello! I’m interested in you hole punch press. Can I use my own prongs
Answer:	It does not work with regular paper at all. Or watercolor paper, which I also tried. This instrument is specific to leather, which is does very well.
Question:	What is the difference between C & D
Answer:	It depends on the thickness. I struggled with it going through thick leather.

Product features

Parameters

• Toothed Rack Width: 22mm
• Die Hole Diameter: 11mm (M12 screw thread)
• Bottom Plate Big Round Hole Diameter (feeding hole): 27mm
• Drill Chuck Clamping Range: 1.5-13mm
• Max Machine Pressure (downforce): Less or Equal to 160Kg
• Net Weight: 6Kg

Product description

Specification：

Toothed rack width: 22mm

Die hole diameter: 11mm(M12 screw thread)

Bottom plate big round hole diameter (feeding hole): 27mm

Drill chuck clamping range: 1.5-13mm

Max machine pressure( downforce): less or equal to 160 Kg.

Package Included:

1*Machine

1*Drill chuck

• This machine is mainly aimed at leather handcraft workers, used for punching, pronging and stamping process, improving efficiency and working quality
• With different accessories to achieve multi-function, Quick installation and easy operation
• If the clamp is difficult to move up and adjust, please use a single-blade screwdriver to properly pry off the clamp part, which makes it easier to adjust the height of the clamp
• Safe operation, machine stamping instead of beating prongs with a hammer.Max 160Kg of pressure (down force) to good stamping effect
• With labor-saving spring, press repeatedly without fatigue. Make your work easier and more convenient

User questions & answers

Question:	Is the handle ambidextrous
Answer:	Not really, handle is set for right handed people and I don’t see a way for it to move to the other side unfortunately

• This leather punch is a heavy-duty leather punch for DIY leather craft punching. Mainly for the punching, embossing and stamping processes of leather craftsmen.
• Scaled worktable to help positioning. Equipped with drill chuck, it can realize punching, bifurcation, stamping and other similar functions by clamping various tools.
• Using a labor-saving spring, it can be pressed repeatedly without fatigue and easy to operate. High-strength hexagon socket screws are more durable and improve work efficiency and quality.
• Mechanical stamping is not about hitting the fork with a hammer, but safe operation and avoiding the knocking action, less noise, will not affect other people.
• Fasttobuy provides professional and efficient customer service to all customers. You can easily find many other leather crafting machines and tools in our shop.

Product description

Welcome to DingYiHanHan store, our products are sent from the US and our logistic carrier partners are FEDEX and UPS. You only need 4-7 days to receive the package.

After you receive the item, if there is any question,please feel free to contact us. We will provide you with quick and effective help and compensation in the first time. Your satisfaction is our greatest motivation.

Parameters:

• Toothed rack width: 22mm
• Die hole diameter: 11mm(M12 screw thread)
• Bottom plate big round hole diameter (feeding hole): 27mm
• Drill chuck clamping range: 1.5-13mm
• Max machine pressure(downforce): less or equal to 160 Kg
• Net Weight: 6KG

Features:

• 1. Low operating noise
• 2. With labor-saving spring
• 3. Safe operation, machine stamping instead of beating prongs with a hammer
• 3. With different accessories to achieve multi-function
• 4. Quick installation and easy operation
• 5. Max 160Kg of pressure (down force) to good stamping effect

Applications:

• This machine is mainly aimed at leather handcraft workers, used for punching, pronging and stamping process, improving efficiency and working quality.

Prong Tools:

• Circular punch material: high-carbon steel
• Prong punch material: white steel
• Prong punch spacing: 4mm
• 4PC Leather prong punch (1tooth+2tooth+4tooth+6tooth)
• 7PC Circular punch (1.5mm+2mm+2.5mm+3mm+3.5mm+4mm+4.5mm+6mm)

Packing List:

• 1 x Machine
• 1 x Drill chuck
• 2 x Allen spanner
• 1 x Manual
• 1 x PP plate
• 1x Aluminium Plate with scale
• 【Leather Hole Puncher】This leather hole puncher is a heavy duty leather stamping machine for DIY leather craft punching holes. Mainly aimed at leather handcraft workers for punching, pronging and stamping process. Machine stamping instead of beating prongs with a hammer, safety of operation and avoided knocking action, smaller noise, will not affect other people.
• 【Specification】Toothed rack width: 22mm; Die hole diameter: 11mm(M12 screw thread); Bottom plate big round hole diameter (feeding hole): 27mm; Drill chuck clamping range: 1.5-13mm; Max machine pressure(downforce): less or equal to 160 Kg; Net Weight: 6KG.
• 【Low Effort & High Efficiency】With labor-saving spring, press repeatedly without fatigue and easy to operate. High-strength hexagon socket screws, more durable and firm, improving working efficiency and quality.
• 【High Pressure Force】Max 160Kg of pressure (down force) to good stamping effect. Equip with drill chuck, it could achieve punching, pronging, stamping and other similar functions by clamping various tools.
• 【Packing List】1 x Machine; 1 x Drill chuck; 2 x Allen spanner; 1 x Manual; 1 x PP plate; 1x Aluminium Plate with scale; 4 x Prong punch; 7 x Circular punch. Feel free to contact us if you have any questions. We will provide the best suitable solutions for you.

• 【PUNCHING CAPACITY】- The maximum pressure of the hydraulic hole punching machine can reach 6 tons. It can easily open holes on the iron plate within 0.06" / 1.5 mm and the stainless steel plate within 0.04" / 1 mm. Punched holes are smooth without burr.
• 【COMPLETE ACCESSORIES】- In order to meet different operating needs, the manual hole digger punch is equipped with 5 kinds of dies: 0.63" / 16 mm, 0.71" / 18 mm, 0.79" / 20 mm, 0.87" / 22 mm, 0.98" / 25 mm. One seal ring and hex wrench are included.
• 【TROUBLE-FREE USAGE】 - The 2.76" throat depth of the hydraulic punch greatly expands the range of distance, and the oil return bolt achieves fast pressure relief. Meanwhile, the ergonomic handle and auxiliary return rubber make the operation simple and labor-saving.
• 【CONVENIENTLY CARRIED】 - The hydraulic punching tool is integrally formed and super easy to carry. The weight is relatively light, only 8.16 lbs / 3.7 kg. You can take it easily regardless of site and location restrictions.
• 【WIDE APPLICATION】 - Our manual hydraulic punch could be used for power construction, shipbuilding, road bridges, construction sites, and other industries to install and maintain the openings of wires, pipes, instrument switches, etc. It is suitable for multiple situations.

Product features

Hydraulic Hole Punching Machine

With sufficient tonnage and artificial design, the hydraulic hole opener we offered is easy to operate, labor-saving, and fast. Fit for iron plate within 0.06" and stainless steel plate within 0.04", it can be used for metallurgy, chemical, electronics, shipbuilding, machinery, and other industries to punch holes in steel plates, iron plates, wires, pipes, instrument switches, etc. The processing surfaces are smooth and clean.

Max Pressure 6 Ton

With sufficient tonnage, this hydraulic hole opener can easily open holes on the thickest 0.06" / 1.5 mm iron plate and the thickest 0.04" / 1 mm stainless steel plate.

5 PCS Punching Dies

The diameters of the 5 kinds of dies are 0.63" / 16 mm, 0.71" / 18 mm, 0.79" / 20 mm, 0.87" / 22 mm, 0.98" / 25mm. You can exchange dies and improve work efficiency significantly.

Simple Punching Process

The drilling position is at most 2.76" / 70 mm from the edge, mainly expanding the usable range. The oil return bolt adopts the lever principle, and the pressure can be relieved by pressing the switch quickly.

Humanized Design

The ring-shaped rubber handle increases the friction of the handgrip, and the upper die will automatically return to its original position under the action of rubber and piston, which is user-friendly.

Compact Structure

The hydraulic hole opener is compact in structure and small in size. The length of our product is only 13.58" / 135 mm, and the weight is merely 8.16 lbs / 3.7 kg, convenient to take and carry.

Wide Application

Our product is mainly applied to the stainless steel washbasins, power transmission panels, electric power boxes, steel plates, iron plates, and bridge plates to dig holes.

Specifications

• Model: CH-25
• Material: 40 Chrome Steel Made Clamp
• Operate Way: Manual
• Tonnage: 6 T
• Throat Depth: 2.76" / 70 mm
• Punching Capability: Iron Plate within 0.06" / 1.5 mm, Stainless Steel Plate within 0.04" / 1 mm
• Configuration: Φ0.63" / 16mm, 0.71" / 18 mm, 0.79" / 20mm, 0.87" / 22 mm, 0.98" / 25 mm
• Weight: 3.7 kg / 8.16 lbs
• Product Size: 13.58" x 2.36" x 5.31" / 345 x 60 x 135 mm

• 🔑METAL SHELL---Made of high quality metal, the metal hole puncher has the advantages of stability and durability, anti-fall and anti-wear.
• 🔑ELASTIC ADJUSTMNET---The air hole punch can be tightened clockwise and loosened counterclockwise. Please note that the needle is consumable and it can be replaced.
• 🔑ELASTIC ADJUSTMNET---The air hole punch can be tightened clockwise and loosened counterclockwise. Please note that the needle is consumable and it can be replaced.
• 🔑1/4’’ CONNECTOR--- Equipped with a perforated exhaust port and a 1/4’’ quick connector to fasten the air pipe.
• 🔑STRONG SHEAR FORCE---The shearing force of the machine can reach 708kg, making drilling holes very easy.

User questions & answers

Question:	Is there a way to get this in the 9mm size
Answer:	This product does not have 9mm size. We have another type of puncher that has 9mm size, but it only can punch aluminum plate below 1.5mm.
Question:	Is there an accessory to punch 6 or 7mm holes
Answer:	This size can punch 6mm hole https://www.amazon.com/dp/B082HH4C1N/ref=twister_B082HH6M8T?_encoding=UTF8&th=1
Question:	Can this tool punch 3/16" holes on 14 and 16 gauge galvanized steel
Answer:	Tried it on 14 gauge base angle with jobsite gasoline compressor pushing 125 psi and not even close. Gonna try my shop compressor at 175 psi when I get a chance, but I have my doubts.
Question:	Will this punch through .065" spring steel
Answer:	This puncher is suitable for steel plates within 3/64"(1mm).

Product features

Industrial Air Hole Puncher

Pneumatic Hole Opener

• Detachable air inlet, tightly connected to the air pipe.
• The metal shell is stable and durable, withstands higher power, and resists falling and compression.
• The comfortable handle and smooth surface make it easier to use.
• White steel forging, high hardness firing pin, can be hit stainless steel.
• The firing pin is forged from a special alloy steel material with a hardness of HRC-60, which is durable and has sharp impact.

Flexible and Adjustable

The clamp can adjust the stroke of the impact needle, which can be used to thicken and thin as you like. After adjusting to the proper striker stroke, tighten the red nut to fix it.

360° rotating clamp head

Rotate the clamp head 360°, a simpler way of rotating, manually reverse to loosen the clamp rod, and the angle of rotation can be achieved.

Firing pin

The firing pin is a consumable, it is normal to wear after long-term use, and it needs to be replaced regularly.

Product description

Specification：

Toothed rack width: 22mm

Die hole diameter: 11mm(M12 screw thread)

Bottom plate big round hole diameter (feeding hole): 27mm

Drill chuck clamping range: 1.5-13mm

Max machine pressure( downforce): less or equal to 160 Kg.

 

Package Include

1*Machine

2*Spanner

1*Drill chuck

• ✦【Efficiency Improve】: This machine is mainly aimed at leather handcraft workers, used for punching, pronging and stamping process, improving efficiency and working quality.
• ✦【Multi Accessories】: With different accessories to achieve multi-function, Quick installation and easy operation.
• ✦【Safe Operation】: This product using machine stamping instead of beating prongs with a hammer
• ✦【High Pressure Force】: Max 160Kg of pressure (down force) to good stamping effect.
• ✦【Easy to Use】: With labor-saving spring, press repeatedly without fatigue. Make your work easier and more convenient.

• ELECTRIC COIL INSERTER that includes Coil Crimping Tool - Create professional-looking bound books at home or in the office quickly and easily. The TruBind Coil-Binding Machine electronically inserts plastic coils for faster binding.
• FULL HANDLEBAR - Our sturdy-grip handlebar allows you to punch holes in your documents either left- or right-handed. Simply apply steady pressure to punch holes in up to 20 sheets of paper at a time.
• MARGIN ADJUSTMENTS - Bind your own books of any size or shape. The TruBind Coil-Binding Machine has side and depth margin adjustments, so you control where the holes are punched on paper of any size.
• CUSTOMIZABLE BINDING - Disengaging pins let you control where the binding machine punches holes, and the open-throat design means you can punch holes and insert binding in paper larger than letter size.
• TWO-YEAR MANUFACTURER WARRANTY - We stand by the quality of our office equipment. If you are not completely satisfied with your TruBind Coil-Binding Machine, just send it back for a complete refund.

User questions & answers

Question:	The write up says "up to 20 sheets". Do you punch 20 sheets, then punch another 20 pages separately and then put them all back in to coil bind
Answer:	To get a good hole uniformly on each page, I would recommend 10-15 pages per punch. Then, you would add the comb binding to however many sets of 10-15 pages you punched.
Question:	what is the maximum mm coil you can use
Answer:	You can use whatever size coil you can find on the market. The largest coil which works with the electric coil inserter is 7/8 inch. The largest coils that I have seen advertised have been 2 inch but if you can find any larger, there is certainly no reason why you cannot use them. Anything larger than 7/8 of an inch has to be inserted by hand. It's really not all that hard to do but it does take a little bit longer.
Question:	What materials do I need to get to actually bind something using this machine? coil? Can I find that on here too
Answer:	In addition to the machine, you'll need plastic coils, covers, and a pair of coil crimping pliers. All of these items are sold separately and available for purchase on Amazon. The most common coil sizes are those for smaller books, generally ranging between 6mm and 12mm (which will accommodate books up to 92 pages, based on 20 lb. paper).
Question:	Would I be able to do smaller books-----say a 3 x 5 book or maybe even a 2 x 4 book
Answer:	The silver button looking things on the front can be pulled forward to disengage individual whole punches. This will alow you to punch the exact number of holes you want for any book. The spiral bindings can be cut with wire cutters to smaller sizes as well. Long answer short, yes, you can do smaller books with this machine.

Product features

Adjustable Depth & Side Margin

• Depth Margin: adjust the distance of your hole punches from the edge of your project.
• Side Margin: choose exactly where you want your holes to be punched based on the size of your project.
• Increases productivity: Once your Depth and Side Margins are set, you're ready to start binding project after project quickly and efficiently.

Sizing Guide

• Refer to the Sizing Guide decal on the machine to select the proper coil size based on the number of pages in your project.
• Refer to the Document Size decal when adjusting your Side Margin to get the perfect punch based on the size of your document.

Built-in Waste Bin

• The built-in waste bin is easily accessed at the rear of the machine and helps to keep your work station clean as it catches all the debris during the binding process.

Included: Heavy Duty Coil Cutting & Crimping Tool

• Every Trubind TB-S20A binding machine includes a complimentary heavy duty coil cutting and crimping tool.

Electric Coil Inserter | Hands Free Operation

• Saves time and effort for large workloads.
• Faster and easier coil insertion for larger projects.
• The red button allows you to turn on and off the electric coil inserter for a hands free operation.

Die Type: 46 Disengaging Pins

• 46 fully adjustable disengageable pins help you avoid any half punched holes on your document.

110v AC Adapter Included

• A U.S. standard 110v power AC adapter is included with every TB-S20A.
• Insert the adapter into the back side of the machine to power the electric coil inserter.

Product description

3/8 Inch (10 mm) grommet handheld hole punch pliers kits grommet machine hand press tool with 1000 grommets in silver grommet machine pliers hole punch tool and eyelet for banners tarps curtains belts



Features:



Multiple occasions:

The hand-held grommets kit allows you to easily punch holes and fix the grommets eyelets well in materials such as leather, linen, nylon, cotton fabrics and more. It can be applied in coverings for PVC banners, tarpaulin, tents, pool, truck and decorate clothes, bags, shoes, belts, etc.



Specifications:

Size: 0.39 inches/ 10 mm

Colors of grommets eyelet: sliver



Package includes:

1 x Handheld grommets

1000 x Grommet eyelets



Notices:

The product is small in size, children under the age of three are not suitable for use. It can be applied with parents.

Please keep this product away from fire, toxic, flammable and dangerous materials.

Since eyelets are made of iron and need to be protected from moisture, please keep them in a dry place.

The handheld hole punch pliers can only be applied with matching eyelets.

• Package contains: you will get a 10 mm handheld grommet pliers and 1000 pieces grommets eyelets in silver; The eyelets can be applied together with the hole punch pliers, sufficient quantity can satisfy your different use and replacement
• Easy to operate: you don't need to sew or crop before using punching machine grommet kits, you can easily punch holes on leather, tents, awnings, canvas, tarps and other cloth-made products; The operation is simply and quick (refer to the picture for detailed instructions)
• Practical grommet tools: these manual punching pliers are made of steel and the surface are chrome-plated, which can drill holes on belts or clothes without much effort and nicely fix the grommets eyelets, saving your time and energy; Their handles with anti-friction and non-slip design, easy to handle
• Common size: these grommets eyelets are made of solid metal and 0.39 inches/ 10 mm in diameter, which are durable and can serve you for a long time; Silver color makes them match most of objects
• Widely use: this 0.39 inches/ 10 mm handheld grommets kit can be applied in a variety of materials, such as leather, linen, nylon, cotton fabric, etc., suitable for coverings of PVC banners, tarpaulin, tents, pool, and truck; It is also can be applied to decorated clothes, bags, shoes, belts, wallets and other crafts

• 【PRECISE POSITIONING】- The hydraulic hole puncher is made of stainless steel, which is durable. It can accurately position and drill without offsetting. Hydraulic punching will maintain stable penetration, avoiding chipping.
• 【ULTRA-HIGH POWER】- Equipped with a 900W high power motor, the electric hydraulic hole puncher features high efficiency and quickly enters the hole. It is suitable for an iron/steel plate no higher than 6 mm and a copper/aluminum plate no higher than 8 mm.
• 【STANDARD PUNCH DIES】- The hydraulic puncher also comes with five standard punch dies, φ6.5, φ9, φ13, φ17, φ20.5mm, respectively. You can choose any one of them according to your requirements when you use it.
• 【MANUAL OIL RETURN SWITCH】- Our product has a high-strength and durable open button. You can turn on and off the switch several times in a row without damage. The manual oil return switch can return oil anytime and anywhere, convenient to operate.
• 【WIDE APPLICATIONS】- The electric hydraulic hole punch can be used in punching on steel plate, angle steel plate, iron plate, aluminum plate, and U-steel, especially in some industrial and mechanical place. You can also use it at home to meet your needs.

User questions & answers

Question:	I need to punch 1000 holes a day, 6 days a week. Can this machine handle this type of repetitive work
Answer:	no

Product features

Electric Hydraulic Hole Puncher

We offer you a superior MPH-20 hydraulic puncher press. It is a portable electric-hydraulic punch that is capable of cutting 1/4" thick material. The MPH-20 operates on 110V, 60HZ power. It equips with five dies of φ6.5, φ9, φ13, φ17, φ20.5mm. The electric hydraulic hole punch can be used in punching on steel plate, angle steel plate, iron plate, aluminum plate, and U-steel, especially in some industrial and mechanical place.

Stable Penetration

The hydraulic puncher can drill a hole accurately; you need not worry about the wrong hole position. The puncher will keep stable penetration.

900W High Power

The hydraulic metal hole puncher comes with a 900W strong power, which provides high power for punching, and you can efficiently complete the work.

Five Applicable Dies

There are five different dies, φ6.5, φ9, φ13, φ17, φ20.5mm. They are portable and easy to use, improving punching efficiency.

Durable Open Button

The open button of our product is durable and can be opened many times in succession. It also can return oil anytime.

Auxiliary Handle Design

The auxiliary handle of our product is detachable, and you can operate it from different angles, which is convenient and easy to use.

Various Uses

The handy hydraulic puncher is suitable for punching on steel plate, angle steel plate, iron plate, aluminum plate, and U-steel.

Specifications

• Model: MPH-20
• Rated Voltage: 110V±15%, 50/60Hz
• Motor Power: 900W
• Maximum Output: 10 T/ 22046 lbs
• Cutting Thick: 1/4 in
• Throat Depth: 40 mm/1.57 in
• Punching Speed: 2-3s
• Copper/Aluminum Plate: Thickness ≤ 8 mm/0.3 in
• Iron / Steel Plate: Thickness ≤ 6 mm/0.2 in
• Dies Size: φ6.5, φ9, φ13, φ17, φ20.5mm