12 best snap ring pliers for ford

Product description

Used to Replace the Spindle Snap Rings

Found on 2007 and Newer Ford Super

Duty Pickups.

• Rigid plier design with narrow tips to fit into the 2-1/2” inside diameter of the hub.
• Ratcheting lock mechanism holds the snap ring open for easy removal and installation
• Heavy Duty Pliers
• Fit type: Vehicle Specific

Product description

PLIER SNAP RING 16" 2 PC (BMC). 1 Internal. 1 External. Heat treated tip. Soft grip handle. Includes 4 quick-change snap ring tips: 2- 45 degree, 2- 90 degree

• Includes both internal and external snap ring pliers for snap rings inside a bore or around a shaft
• Uses a spring ratchet locking mechanism to securely hold against circle tension and work with non-standard circlips
• Interchangeable tips are made with hardened, heat treated steel for durability and black oxide finish prevents corrosion
• Comes with straight tips attached and includes 4 quick-change snap ring tips: 2- 45 degree, 2- 90 degree
• Specs: spread: 3-1/4"; internal pliers capacity: 3-1/16" to 6-1/4"; external pliers capacity: 3-1/2" to 6-1/2"

User questions & answers

Question:	will these work for 3.5" internal rings
Answer:	Yes. I ship fast and immediately upon receipt of purchase.
Question:	What is the reach of the tips? Is it greater than 30 millimeters
Answer:	These are traditional Post-it Notes. If you are looking for the alternating side notes to use with a dispenser, search for Post-it Pop-Up Notes.
Question:	What are the size of the tips
Answer:	No.
Question:	Where can I buy more tips
Answer:	good question!

Product description

Gear wrench 2-Piece double-X internal snap ring pliers. Contains: 82032 double X snap ring plier, .038 straight tip set, .038 90 degree tip set, .047 straight tip set, .047 90 degree tip set, .070 straight tip set, 2millimeter hex key, plastic caddy for tips. Gear wrench double X pliers feature compound joint that allows access with minimal handle movement. Jaws open greater distance than the handle for added reach in tight locations. Tool's design provides for maximum reach without exceeding center point of interference. Flush rivet for strength and narrow profile, interchangeable straight and 90 degree tips. Plier has corrosion resistant alloy steel and dual-dipped grips for comfort and sure grip.

• Jaws open greater distance than handle for added reach in tight locations
• Maximum reach without exceeding center point of interference
• Flush rivet for strength and narrow profile
• Corrosion resistant alloy steel
• Dual-dipped grips for sure grip and comfort

User questions & answers

Question:	Max separation at tips
Answer:	The deluxe edition includes the standard game and deluxe packs which includes premium customization items to personalize your character, weapons, vehicles, drones and more. The gold edition includes the standard game, season pass and deluxe packs.

Product description

Gear wrench double-X 2-Piece external and internal snap ring plier set. Consisting of 82032 Double-X internal snap ring plier 13-Inch, 82033 Double-X external snap ring plier 13-Inch, .038 straight tip set, .038 90 degree tip set, .047 straight tip set, .047 90 degree tip set, .070 straight tip set, 2 millimeter hex key, plastic caddy for tips.

• Jaws open greater distance than handle for added reach in tight locations
• Maximum reach without exceeding center point of interference
• Flush rivet for strength and narrow profile
• Corrosion resistant alloy steel
• Dual-dipped grips for sure grip and comfort

User questions & answers

Question:	Do they come in a plastic tray so they stay organized in a drawer
Answer:	Yes, you are able to play this game on a Xbox One S.
Question:	Do the tips line up nice so you can get a good grip on small objects
Answer:	The Crew does not have local co-op. You can play with up to 4 people online.
Question:	Maximum opening size
Answer:	Yes, you can.

Product description

Features and Benefits: Made of ductile iron.

• [HIGH QUALITY]- High quality, Precision machined, steel construction provides enhanced durability and extended life
• [COMFORT GRIP]- Highly Durable, Secure and Safe to Use - The snap ring pliers feature premium vinyl non slip handles which provides overall control, makes them more comfortable and secure than others
• [MULTI USE] - Our snap plier is ideal to remove and install externally placed retaining rings. It also provides instant holding power and is easy to reposition during assembly & fastening
• [LIFETIME WARRANTY]- Snap Rings Pliers is warranted for life
• [IDEAL USE]- This tool is perfect for removes and installs externally placed retaining rings, widely applied for the fixed bearing or hole bearing in machinery industry, such for bicycles, motorcycle, farm machinery.

Product description

OTC 0600 External Straight Tip Snap Ring Pliers are designed to install and remove standard and reverse lug rings. .090 inch diameter straight tip. Fits standard lug external rings sized 150 through 350, shaft sizes 1-1/2 inch through 3-1/2 inch. Also fits reversed lug external rings sized 215 through 334, shaft sizes 2-1/8 inch through 3-11/32 inch. Durable, tempered steel construction with vinyl grips. Made in USA. Value is at the core of the OTC tool and equipment portfolio. Whether it’s a simple repair or the most complex drivability concern, these award-winning tools universally solve problems faster, and at better value, than any other product line available. Whether it’s a specialty tool or unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians’ productivity and shop profits.

• .090 inch diameter straight tip external snap ring pliers
• Fits standard lug external rings sized 150 through 350, shaft sizes 1-1/2 inch through 3-1/2 inch
• Also fits reversed lug external rings sized 215 through 334, shaft sizes 2-1/8 inch through 3-11/32 inch
• Durable, tempered steel construction
• Vinyl grips

User questions & answers

Question:	what is the total lenth
Answer:	No it’s a traditional mouse that connects with a cord

Product features

OTC - Proudly Serving Professional Technicians for Almost a Century

Technicians are problem solvers who aren’t afraid of sweat on their brow and grease on their hands. They provide high quality services that demand high quality tools. When they need a reliable tool, they know they can depend on OTC tools to deliver.

Owatonna Tool Company for the long haul — proudly designing and manufacturing American specialty service tools, diagnostics and shop equipment since 1925.

Product description

Gear wrench 2-Piece double-X external snap ring pliers 13. Contains: 82033 double X snap ring plier, .038 straight tip set, .038 90 degree tip set, .047 straight tip set, .047 90 degree tip set, .070 straight tip set, 2millimeter hex key, plastic caddy for tips. Gear wrench double X pliers feature compound joint that allows access with minimal handle movement. Jaws open greater distance than the handle for added reach in tight locations. Tool's design provides for maximum reach without exceeding center point of interference. Flush rivet for strength and narrow profile, interchangeable straight and 90 degree tips. Plier has corrosion resistant alloy steel and dual-dipped grips for comfort and sure grip.

• Jaws open greater distance than handle for added reach in tight locations
• Maximum reach without exceeding center point of interference
• Flush rivet for strength and narrow profile
• Corrosion resistant alloy steel
• Dual-dipped grips for sure grip and comfort

User questions & answers

Question:	How far do the jaws open
Answer:	about 3 inches at the tip.
Question:	how long is it
Answer:	Fully Open 2.58" external spread at inside tip
Question:	Will this work on a 2014 f350 front wheel assembly
Answer:	Not for the Xbox One edition but for PC.
Question:	Are the pliers internal or external
Answer:	You will need a minimum of 24 GB for this game.

Product description

1. Snap Ring Pliers are forged from hardened chrome vanadium steel.

2. Tip is forged inward to prevent retaining rings from slipping off and is used for installing and removing internal rings on the inside bore holes.

3. Non-slip plastic dipped handle for easy and comfortable grip during fitting and removal.

4. Used widely to remove or install the spring in the mechanical equipment.



Specification:

Product Name: Snap Ring Pliers

Material: Cr-V, Plastic

Total Length: 225mm / 9 inch

Jaw Type: Internal Straight

Tip Diameter: 2mm / 0.08 inch

Jaw Capacity: 3-34mm(Min-Max)

Package Content: 1 x Snap Ring Pliers

Weight: 256g; Color: Black, Red

• 9 inch Internal Circlip Pliers, straight nose
• Made of hardened Chrome Vanadium
• For easy fitting of internal snap rings
• Tip is forged inward to prevent retaining rings from slipping off and is used for installing and removing internal rings on the inside bore holes.
• Non-slip plastic dipped handle for easy and comfortable grip

User questions & answers

Question:	How long is the nose of the pliers
Answer:	Yes

Product description

The Astro 94222 13" 4pc Large Internal/ External Snap Ring Pliers are made of hardened chrome vanadium with a professional fit and finish. The pliers in this set include internal and external straight and 90 degree bent pliers with a 0.90” tip size.

• Includes Internal and External straight and 90 degree bent pliers with a 0.90” tip size
• Made of hardened Chrome Vanadium
• Black & Polished Finish with Dipped, Non-Slip Handles
• Professional fit and finish
• 13” long pliers, 0.90” (2.3mm) tip size

User questions & answers

Question:	will these handle 1.5" and 2.0" external rings
Answer:	They did for me.
Question:	Where are these made
Answer:	Made in China, and are absolutely built strong.
Question:	will these handle 1.5" and 2.0" external rings
Answer:	I bought these and another set (same brand slightly smaller to complement my tool box and throw all the other ones in my junk tool box) for removing the internal circlips on motorcycle fork seal clips (about 2-1/4"). These worked great! The other set is for smaller pin holes and). Both kits I bought have 2 sets of internal and 2 sets for external (straight and 90 deg.). They are very heavy duty and removed the frozen rusted clips when all other supposedly good snap ring plyers have failed and broke. I've spent more money on the useless combo ones then I spent on these. As far as snap ring size you will need to check the catch holes on your snap rings with the tail end of a decimal drill bit and make sure the pins will work on the set you buy.
Question:	Is there any warranty on this pliers set
Answer:	Yes, 1yr warranty.

Product description

Made In Wuppertal-Cronenberg, Germany. In Addition To Quality, Innovation And Performance, Other Important Cornerstones Are Sustainable Actions And Value-Guided Orientation.

• Eight of Knipex best selling Precision circlip pliers in one kit - includes foam tool storage tray
• Heavy duty for continuous operation - up to 10 times longer service life than turned tips
• Tips are made of high-density spring steel and offer a high level of protection against excessive stress and strain
• Contains Internal Circlip Pliers: 48 11 J1, 48 11 J2, 48 21 J11, and 48 21 J21
• Contains External Circlip Pliers: 49 11 A1, 49 11 A2, 49 21 A11, and 49 21 A21

User questions & answers

Question:	Do these pliers have the set screw to make small adjustments and not over stretch your circlips
Answer:	no
Question:	Origin above says china. i thought knipex were german. what's the truth
Answer:	Knipex is a German manufacturer of pliers for professional use. The headquarters are located in Wuppertal-Cronenberg. For four generations, Knipex has been an independent, owner-managed family company. WikipediaHeadquarters: Wuppertal, GermanyFounded: 1882, Wuppertal, GermanyCEO: Ralf Putsch
Question:	What is the warranty on this set
Answer:	If you scroll down in the discription you can click on the KNIPEX warranty information and see what it says for yourself and make a decession basied on what you read.
Question:	Are all of the pliers in the set spring loaded? I just got mine and only two of them are spring loaded
Answer:	The 2 shorter handle pliers (straight and bent) in the top left compartment should both be spring assisted... and the 2 longer handle pliers (straight and bent) in the very bottom compartment should both be spring assisted. To spot the spring loaded pliers in the picture (as well as my personal set) look for the pliers that appear to be open in the picture. So you should have a total of 4 pliers with a spring load and 4 pliers without. This would be the difference in pliers used for internal snap rings vs external snap rings. So "Rick's" answer below, is incorrect, if in fact he has the exact same set as these... or he better check his pliers again... because he should return them for the right ones...lol. Hope this helps.

Product features

Knipex 00 20 04 SB, 8-Piece Precision Circlip Snap-Ring Pliers Set

Knipex’s Precision Snap Ring Pliers feature spring steel tips that will last longer than typical snap ring pliers. Significant pressure is exerted on snap rings when they are put on or taken off. Sometimes, this pressure is transferred to the pliers tip which can subsequently cause breakage, especially when the tip is poorly cnstructed from pressed steel. Knipex’s Snap Ring Pliers are forged from a solid piece of Chrome vanadium steel. These pliers are much stronger, perform more consistently and will last much longer (up to 10X longer) than other pliers. The tips of the Snap Ring Pliers feature a grooved surface that acts to hold the snap ring on the tips of the pliers more securely. These spring steel Snap Ring Pliers are available in several diameter sizes with internal and external tips in a straight or 90° angled design. They are available individually or in popular sized sets.

Quality in Every Detail

Sometimes we give our pliers a really hard time. We try to destroy them to find out what makes them good and long-lasting. Because we don't want to leave anything to chance, we take a long, careful look.

The steel Knipex uses is precisely hardened with a maximum of 0.8% carbon and defined parts of chromium and vanadium, guaranteeing optimum cutting performance and service life — even though it requires special production and costs a bit more. But our high product demands require this.

Knipex also looks closely at the small details. The angles, the sharpness, the hardness, the toughness of the cutting edges. The precision and smooth movement of the joint. The handle design and the finish. We keep reviewing these subjects, we research, we test, and we improve our pliers.

Product description

Pliers include 3 pairs of interchangeable points in the following sizes: 0.108" diameter, 15 degree angle; 0.108" diameter, 45 degree angle and 0.123" diameter, 45 degree angle. The tips are designed to have a secure lock and maintain the positions while in use. These are made with strong quality and safety for a good performance!

• Removes and installs heavy duty internal snap rings from 2-7/16" to 3-1/2" in diameter and external snap rings from 1-1/2" to 4" in diameter
• Points lock securely into the jaws
• Screw-type design maintains jaw position during use
• Overall length without tips: 9-1/2"
• Hex stock size of tips: .156"

User questions & answers

Question:	Has anyone successfully removed the front hub snap ring from an F-350 with these? Mine is a
Answer:	On rear of package it states "Lifetime" warranty and includes contact information. Great quality tools.
Question:	Can I buy just the replacement tips
Answer:	Like WU HUANG said, Taiwan. Don't be afraid to buy, they are very well built and as far as tools go, USA first, Taiwanese second and China for all the rest of the junk.
Question:	What is the size of the holes the pins will go into? The snap rings I am looking at this for has holes that measure 0.098 inches or 2.5mm
Answer:	Unfortunately no
Question:	Has anyone successfully removed the front hub snap ring from an F-350 with these? Mine is a
Answer:	HA HA These are well built, serviceable angles and these tools are borrowed by everyone in the shop frequently. you will LOVE this tool kit!!!

Product description

The Astro Pneumatic 9401 8-Piece Snap Ring Pliers Set operates both internal and external rings. The pliers' heat-treated chrome molybdenum steel material provides enhanced durability and extended life. Comfortable insulated vinyl handles guarantee a sturdy grip. Set includes: 5-1/2-inch Bend Pliers with .038-inch Tip, 6-inch Straight Pliers with .038-inch Tip, 5-1/2-inch Bend Pliers with .047-inch Tip, 6-inch Straight Pliers with .047-inch Tip, 7-1/2-inch Bend Pliers with .070-inch Tip, 8-inch Straight Pliers with .070-inch Tip, 8-1/2-inch Bend Pliers with .090-inch Tip, 9-inch Straight Pliers with .090-inch Tip, 1 -piece 5-inch Hook Tool, and 1 -piece 5-inch Pick Tool in a blow molded case.

• Snap ring pliers operates both internal and external rings
• Heat treated chromium-molybdenum steel
• Comfortable insulated vinyl handles
• Set includes 10 different size snap ring pliers

User questions & answers

Question:	Would any of the pliers remove snap rings from brushless RC motors with 4/5mm shafts? I'm guessing the rings have about 1 mm holes
Answer:	I'm not sure what you're asking the overall measurement is 9 3/8" with the tips being a max of 2 1/4 " these are strictly made for popping loose door panel clips and the like such as the old type plastic clips that hold on fender panels and such they are very sturdy and work well I myself have used a set since 1988 without any issues . I hope this helps you , Regards Wade
Question:	Will these work with very small (1/8") snap rings
Answer:	These are a good general tool, but for what you are doing I recommend Steck item #21720. It will wrap around the clip solid, so when you pry you have less chance of it slipping off and damaging the trim panel. The older panels are usually cardboard, and wont take very much stress. The KD tools pliers work well with the newer plastic panels.
Question:	HI- I need to take about a 1.5" snap ring out of power steering gear. My pairs with extra tips are too small- 5-7"- so need 8-10" ---will these work
Answer:	tool works as advertised but I did not use it on a F350
Question:	Will these work for 5mm to 8mm circlips
Answer:	I do not know as I have never checked. I think you can purchase at an auto parts store