14 best needle noses

Product description

Get into small spaces with this 6 PC. Mini pliers set. Made from drop forged steel, these pliers offer strength and durability while the multi-zone bi-material grips allow for dedicated comfort and secure grip zones.

• 6-Piece set.
• Case included.
• Multi-zone bi-material grips for comfort and control.
• Drop forged steel for strength and durability
• Full Lifetime Warranty, refer to "Warranty & Support" section below for full details

User questions & answers

Question:	Made in china
Answer:	Yes, the CMHT81716 is manufactured in China.
Question:	what are the size of the pliers? 4 inch
Answer:	All are slightly over 4 inches in length
Question:	Can these be used for jewelry making and do the pliers have teeth in them
Answer:	I haven’t tried using them for jewelry. Two of the pliers have teeth, 2 are side cutters, 2 have smooth jaws, including the one with the hooked bill.
Question:	Do we make anything in the us anymore
Answer:	I work in a factory that makes cardboard boxes for the agricultural sector. I know someone who works in a glass factory. We still make some stuff in the USA.

Product description

When you’re looking to land your next big catch, the Sea Striker will be by your side. Our saltwater lures include Got-Cha plugs, soft plastics, dusters and Buck tail teasers that come in bright colors with great action to grab a fish’s attention. Sea Striker ball bearing snap swivels are small but strong to handle almost any species and depth, while sinker slides are an inexpensive way to weigh down braided line without fraying it. Get rugged surf rods and standing roads for inshore coastal fishing along with rigging kits, beads and snelled hooks.

• Country Of Origin : China
• The Package Height Of The Product Is 4.25 Inches
• The Package Length Of The Product Is 1.5 Inches
• The Package Width Of The Product Is 10.25 Inches

User questions & answers

Question:	Ad says "Steel plated or stainless steel models" but does not identify which is which. Also what is "steel plated
Answer:	Yes, but the release lever for the arm will be on the bottom side instead of the top side.
Question:	Has anyone used these for micro links or hand Tied hair extensions
Answer:	When folded in the reel measures 10 inches then add another 2 inches for the knob. Total 12 inches from wall to knob.
Question:	the description doesn't say what size this is, or if it has a cutter (help
Answer:	I did not have that particular problem. My problem was that the crank handle was missing on my initial shipment. The replacement reel that was sent by Amazon had the same problem. I contacted the reel manufacturer (Ames) and they sent me the missing part, right away. I returned the replacement reel to Amazon. Amazon did not seem to be able to address specific issues. They would have kept sending new reels until I turned blue in the face.
Question:	The description states steel plated OR stainless steel. Which is it
Answer:	I've bought two , and they both came assembled. They have worked out well in the year or so I've had them.

Product description

6" needle nose pliers feature long, tempered jaws ideal for bending wires or working with small objects as well as work in tight places. With carbon steel construction provides durability and long life, plastic-dipped handles provide comfortable use. These are great tool for bending wire, jewelry making, computers maintenance, electronics repair, small object gripping etc.

• 6-inch needle nose pliers with long tempered jaws for working in hard to reach areas, excellent for work in tight places.
• Tapered nose with fine tips for bending wire, jewelry making, computers maintenance, electronics repair, small object gripping ect.
• Great tool for general, hobby, or craft use, especially useful for jewelry craftsmen, artisans, electricians, and network engineers.
• Carbon steel construction for durability; Plastic-dipped handles for added comfort.
• Leaf Spring loaded design makes this long nose pliers easier to use and relieve fatigue.

User questions & answers

Question:	Are these made in the USA
Answer:	6 inches and yes a very good cutter
Question:	What is the width at the tip
Answer:	Not stainless steel. I use in saltwater and rinse. They are good, will cut line and steel leader with no problem.
Question:	Are these smooth jaw pliers
Answer:	Open all the way & then press down on tab in middle where it catches and pull out.
Question:	What size is tip
Answer:	Yes, if it is initially installed by using screws into studs, it should be fairly easy for one person to remove and reinstall; however, the hose reel is quite cumbersome and would recommend having one person hold the reel in place while the other person re-installs the screws into the studs. If using molly bolts, you will have to purchase new bolts each time you re-install because the part of the molly bolt that is inside the wall will fall off inside the wall.

Product description

Value Not found

• Strips, cuts, loops, crimps and shears
• Strips 10-18 AWG solid and 12-20 AWG stranded wire.
• 6-32 and 8-32 screw shearing.
• Crimps non-insulated connectors, lugs and terminals.
• Dual material Journeyman handles provide better grip.

User questions & answers

Question:	Are these insulated
Answer:	Not insulated. Plastic-dipped or slip-on plastic handles are NOT intended for protection against electrical shock.
Question:	If you thread the screw in the wrong way and now have the sheared part of the screw stuck in the pliers, what would be the best way to get it out
Answer:	Try a very sharp twist bit smaller than the threaded ID- with the pliers open, drill from the UN-CUT Side. As the bit gets a bite, hopefully it will actually rotate the piece of screw out of the tool.
Question:	Does it strip all wire type well
Answer:	Strips 10-18 AWG Solid and 12-20 AWG Stranded wire. We haven't' had any complaints.We have it in stock. Hope this helps.
Question:	Does the spring loaded version have a lock
Answer:	The spring loaded set does not have a locking mechanism.

Product features

Needle Nose Pliers with Crimper, All Purpose Plier Crimps, Strips, Cuts, Loops, and Shears

This All Purpose tool is the perfect combination of wire stripper and long nose pliers with the added bonus of a crimper. Cuts, strips and twists wire. Shears bolts, crimps and reaches into tight spaces.

• The item comes with 45 degree angled or straight needle nose pliers,total 2*6 inch needle nose pliers
• Made of drop-forged carbon steel with pro heat treatments, nickel anti-rust coated, wear resistant and durable
• 2 mini pliers with its special fine tips could reach into narrow spaces to help you do small jobs, like bending wire, jewelry making, industrial maintenance, electrical and mechanical maintenance, instrument maintenance and household appliance repair.
• The handle is designed with anti-slip rubber for better grip while wet, insulated for cold weather use
• Apply lubricating antirust oil to the surface to avoid rust when not use.If you have any questions about our products, please feel free to contact us.

Product description

These Long-Nose Side-Cutters are made of forged steel for durability. The long nose is great for grabbing and looping wire. Cutting knives are induction hardened for long life. Knurled jaws provide sure wrapping and looping. 7-Inch long nose pliers ensure easy work in confined areas. Pliers with knurled jaw offer better gripping power. Steel pliers have curved plastic-dipped handles. Plastic-dipped handles for comfort and ease of identification. Custom, US-made tool steel. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.

From the Manufacturer

Klein D203-7 7-Inch Standard Long-Nose Pliers-Side-Cutting. The Klein D203-7 7-Inch Standard Long-Nose Pliers-Side-Cutting feature induction hardened, long-lasting cutting knives, knurled jaws for sure wrapping and looping, and curved handles that provide greater tool control. The Klein D203-7 7-Inch Standard Long-Nose Pliers-Side-Cutting is custom US-made tool steel. The Klein D203-7 7-Inch Standard Long-Nose Pliers-Side-Cutting has hot-riveted joint ensures smooth action and no handle wobble, slim head design for working in confined areas, and plastic-dipped handles for comfort and ease of identification.

• Induction-hardened cutting knives for long life
• Knurled jaws for sure wrapping and looping
• Slim head design for working in confined areas
• Hot-riveted joint ensures smooth action and no handle wobble
• Curved handles provide greater tool control

User questions & answers

Question:	are all Klein tools made in china now, or only some
Answer:	2“
Question:	Are the inside (the gripping surfaces) smoother or textured for grip
Answer:	I am not sure. However, I do know that you must not allow them to "air dry". As doon as they are washed they must be dried or they will have rust spots on them. This might answer your question as to the metal. I would most likely order them sgain because of their shape and tight closure.
Question:	Country of Origin for this product? Thanks in advance
Answer:	Amazon! I do not have a clue as to whether this item can be used as the question is worded. I use this item to pull covers off yoghurt and other sealed food containers. This is why I cannot answer the question as you demand , Amazon.

Product description

Made In Wuppertal-Cronenberg, Germany. In Addition To Quality, Innovation And Performance, Other Important Cornerstones Are Sustainable Actions And Value-Guided Orientation.

From the Manufacturer

The Snipe Nose Side Cutting Pliers have high loadable, elastic precision points. The comfort grip handles are made of two color dual component material. The half-round, long jaws have serrated gripping surfaces. The cutting edges are induction hardened to approximately 61 HRC and will cut medium hard wire maximum diameter 3.2 mm and hard wire with a maximum diameter 2.2 mm.

• Precision Grade Performance Tools
• The Number 1 Choice Of Tradesman Worldwide
• Comfortable In Use And Quality Assured Design
• Fit To Match The Needs In The Shop, At Home Or In The Service Field

User questions & answers

Question:	Is there a return spring
Answer:	I have a five inch and six inch Klein needle nose plier and the stamped markings do not indicate country of origin. For what it's worth, a retailer of this tool states the country of origin is U.S.A. See this link: http://www.grainger.com/product/KLEIN-TOOLS-Needle-Nose-Pliers-4A842
Question:	What material is the comfort grip handle? Will oil or solvents degrade them and make them peel and smell
Answer:	I do not believe so. There is no made in USA stamp in them, so although it's possible I can't say for certain that they are.
Question:	The handle material appears to be the same as on Klein tools. Surely they have to be somewhat insulated, right
Answer:	3.6 x 2.3 mm at the very tip when closed
Question:	Are they nickle or chrome plated
Answer:	The surfaces in the jaw are smooth.

Product description

The product is Tools,Channellock Pliers-7.5in. The product is Highly durable. The product is manufactured United States. The product is manufactured United States.

From the Manufacturer

The Channellock 317 7-1/2-Inch Long Nose Plier with Side Cutter has laser heat-treated cutting edges that last longer. The crosshatch pattern on jaws grips work tightly. Only Channellock uses a knife and anvil style cutting edge to ensure perfect mating and superior cutting edge life. Channellock uses high-carbon C1080 steel for superior performance on the job and electronic coating for ultimate rust prevention. Channellock Blue grips for comfort.

• with side cutter
• Crosshatch pattern on jaws grips work tightly
• CHANNELOCK's knife and anvil style cutting edge ensures perfect mating and superior cutting edge life
• High-carbon C1080 steel for superior performance on the job and electronic coating for ultimate rust prevention
• Made in the USA

User questions & answers

Question:	what the warranty on these
Answer:	It is definitely insulated. More than the plastic dip from Klein tools. But they are not technically voltage rated
Question:	What's the difference between this and the channellock 3017 long nose plier, 8-inch
Answer:	Chrome
Question:	what is the inside to inside distance between the tips, when they are opened to the maximum
Answer:	These needle nose pliers are made in the USA. I have yet to see a Chinese Klein tool yet, but most companies are outsourcing to keep cost down. I hope quality doesn't change if this is happening. The made in USA, plus durability of Klien's tools is why I keep buying this brand. I have Klein lineman cutters that are 19 years old. I use Klein and Malco tools mostly. The only Klein tool I replace due to wear is my wire strippers. most of my tools have aged well and are out in the rain sometimes with me. I just spray with some wd40.
Question:	Where are they made
Answer:	Yes inside the plier it is textured to have a better grip.

Product description

Product description Resilient precision tips snap back into place even after being twisted Half-round, long, pointed jaws With additionally hardened cutting edges (hardness approx. 61 HRC) for soft, medium hard and hard wire Plastic coated handles

• Precision Grade Performance Tools
• The Number 1 Choice Of Tradesman Worldwide
• Comfortable In Use And Quality Assured Design
• Fit To Match The Needs In The Shop, At Home Or In The Service Field
• Each Tool Is Proven And Tested For Durability And Function In Real World Use And Conditions

User questions & answers

Question:	How do the tips of these hold up to twisting common electrical gauge wire
Answer:	2 5/8 inches
Question:	Think you could use this for small stripped screws
Answer:	They are made in USA. ChannelLock makes great tools. And the blue grips are smooth so they clean up easily. I own nearly every one they make! Hopefully they keep their manufacturing in the USA.
Question:	do these rust
Answer:	there is no spring on these.
Question:	Are the teeth offset so that the jaws close completely or do the teeth keep the jaws open
Answer:	Not sure if it's 100% hardened rubber. But they are pretty comfortable. Oil will make them slippery though. I don't think it will degrade the grips though.

Product features

Easy to operate

Pliers act as that extra support to your hands when you need that additional strength. And tackling such a tool should be easy and not an additional job. The KNIPEX Tools Long Nose Pliers with Cutter is versatile and tough.

Stays firm on the object

It is very essential for a plier to stay firm and hold onto the object without slipping to get the job done faster. With the KNIPEX Tools Long Nose Pliers with Cutter, it’s easy to grip the object without slipping and less hand force.

Assured Durability and Utility

From grabbing and turning fasteners to joining wires the KNIPEX Tools Long Nose Pliers with Cutter are wonderful designed hardened teeth in the jaw that hardness approx.

• [Mechanic Pliers Set] Work around obstructions, grip small parts, and bend wires, using the ABN 11 Inch Long Needle Nose Pliers Set; Each set includes a straight needle nose plier, a 45-degree angle needle nose plier, a 90-degree bent needle nose plier, and a duckbill straight plier
• [Reach and Grip Effortlessly] 4 piece long reach pliers set allows you to access limited clearance areas while keeping your hands safe from sharp and hot surfaces; Bend, shape, and twist wire, hold and pull tiny fasteners, and work with objects that are just too small for your fingers
• [For Crafting and Repair Work] When servicing your computer or vehicle, your fingers can be too thick to work with the small parts; Small needle nose pliers help you hold and manipulate these small parts and can also be used to string guitars, wire a fishing pole, and craft jewelry and artwork
• [Perfect Fit for your Projects] Straight and bent nose pliers feature an overall 10 to 11 inch (25.4 to 27.9cm) length to access narrow spaces; Jaw opening reaches to 2.5-3 inches (6.3-7.6cm) and is 3.5 inches (8.9cm) long
• [Comfortable, Secure Grip] 4 inch (10.2cm) soft molded handles ensure more comfort and less user fatigue, while serrated gripping teeth provide these hose pliers with increased control

User questions & answers

Question:	what is the country of manufacture
Answer:	No
Question:	Hello everyone! what type of metal are these made from, cr-v? also, are they sturdy
Answer:	It's salt. It's in every thing we eat and often found in the cleansing products we use.
Question:	do these come with a case of some sort
Answer:	I've used it with clothes soiled from potty training successfully, but I haven't used it for that specific application.
Question:	What country are these tools made in
Answer:	Yes I use it in my HE washing machine

Product features

About the ABN Long Reach Pliers Set

If you work around obstructions, grip small parts, or bend wires, use the ABN Long Reach 11” Inch Plier 4-Piece Set.

The most common sizes for automotive repair are included:

• 90-degree angled plier
• 45-degree angled plier
• Needle nose straight plier
• Duckbill straight plier

*Not for high torque use.

GET IN TIGHT SPOTS

They have an 11” length to access limited clearance/narrow spaces and keep your hands safe.

FITS YOUR APPLICATION

They have estimated 2.5-3” jaw openings and 7-7.5” handle distance when fully expanded, and the jaws are approximately 3.5” long and close without gaps.

NO SLIPPAGE

The cross-cut teeth apply even pressure and grip in any direction without slipping. The 4” soft molded non-slip handles are for less user fatigue and more comfort.

Product description

The Crescent X2 Long Reach Pliers contain a compound joint allows access with minimal handle movement. Jaws open greater distance than the handle for added reach in tight locations. Extends pliers where others cannot go. Contains: 13-Inch Long nose and 12.75-Inch 45-Degree Bent Long Nose pliers.

• Long reach and 45-Degree bent nose long reach pliers with compound action joint for increased access in tight spaces
• Dual material grips designed for improved comfort and performance
• Flush rivets for strength and thinner profile
• Tips are ground with milled grooves, allowing you to grip fasteners and other objects tightly
• Corrosion resistant alloy steel

User questions & answers

Question:	Why the 1 to 2 month wait on shipping
Answer:	Here is the official response to the original question taken directly from the knipex website. "Steel starts to rust as soon as it comes into contact with water and oxygen. If a water-resistant coating is applied, it will not rust. Such layers may be an oil film, varnish or electroplated layer of non-rusting material such as nickel or chrome, for example. An oil film is the simplest method of obtaining rust protection. It is particularly effective on a very smooth surface. For this reason the surfaces of pliers are sanded to finely polish them, and are sometimes even mirror polished. Oil films wear off over time and must be reapplied regularly. Layers of varnish also wear off when the pliers are used intensively. However such intensive use generally prevents rust forming on the areas where the coat of varnish has worn away. As a rule, care should be taken to store the pliers in as dry a place as possible. A chrome plated option is worthwhile if condensation (e.g. in a service vehicle) is unavoidable. Almost all KNIPEX pliers are available with chrome plating." the pliers in question are not chrome plated, so a touch of oil from time to time is appropriate.
Question:	what is the overall length of the pliers
Answer:	the teeth are offset
Question:	Would these have a tight enough grip for pulling very thing, new growth saplings and weeds from a rock bed? Roots are somewhat strong
Answer:	Warranty? They are a good product, cheap price, and last a long time. Who needs a warranty? The shipping would cost more than buying a new one.
Question:	Does it have a lifetime warranty
Answer:	The 317 has a side cutter as others have stated. Both plier's are the same except for that but also there is a difference in price. The 3017 is a few dollars cheaper. I don't use the side cutter on mine so really it was a waist of money for me. It all comes down to your preference. They are both excellent pliers.

Product features

Crescent 2 Pc. X2 Straight and Bent Long Nose Dual Material Plier Set

Overview:

We designed Crescent X2 Long Reach Pliers with double joints so that the jaws can open a greater distance than the handles for improved access in tight spots. These long-nose pliers extend where others pliers cannot go. The PSX204C set includes both straight jaw and bent-nose X2 pliers.

Features:

• Long reach pliers for better access in tight spaces
• Double joints allows the jaws to open a greater distance than the handle
• Compound joint opens wider with less effort
• Flush rivets are stronger and have a thinner profile

• Dual material grips for improved ergonomics and comfort
• Milled grooves in the tips grip fasteners and other objects tightly
• Made from corrosion-resistant alloy steel

Product description

Klein's Long-Nose Side-Cutting Pliers offer a high-leverage design ensures easy cutting with less force needed. The slim head gets into confined spaces while the extended handles provide extra reach. The long nose is great for grabbing and looping wire. Slim head pliers ensure easy work in confined areas. Knife is induction hardened to deliver precise cut. 8-Inch pliers with hot riveted joint deliver smooth action. State-of-the-art, dual material Journeyman handles provide a better grip without sacrificing tool strength or durability. Hard, black material for toughness and durability. Soft material on outer surface for comfort and a firm grip. Color-coded handles allow quick identification of tool. Custom, US-made tool steel. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.

From the Manufacturer

Klein's 8" journeyman heavy duty, long nose pliers go through state-of-the-art dual material molding process. The process allows them to not only have the comfort but the durability. It has a heavier design for greater cutting power. Soft material on outer surface for comfort and a firm grip. The hard black material is for toughness and durability. Also it has a contoured thumb area for additional comfort and positive feel. It gives you all you need in a plier!

• Needle nose plier with heavier design for greater cutting power
• Extended handles provide added reach and leverage
• Slim head design for working in confined areas
• Induction hardened cutting knives for long life
• Hot-riveted joint ensures smooth action and no handle wobble

User questions & answers

Question:	What country are these made in
Answer:	They have a very strong grip so I believe they would work to pull weeds and saplings.
Question:	Do these pliers have teeth on the inside of the long nose? I am looking for a pair of pliers without the teeth on the inside
Answer:	Yes
Question:	What's the difference between these and the klein tools j203-8n 8" inch journeyman heavy duty long nose pliers side cutting
Answer:	After almost a year of nearly exclusive use with safety wire, I don't think electrical wiring will be any problem
Question:	Are these handles insulated for electric
Answer:	Wrong tool for the job. Get a pair of gas fitter's pliers; or better yet the Engineer or Vampliers (which are the US version of the Engineer Pliers) screw pliers. Failing that, a pair of Vise Grips (straight or pipe jaw) works equally as well.

Product features

Needle Nose Pliers with Cutter, Heavy Duty 8-Inch Journeyman

Klein's Long-Nose Side-Cutting Pliers offer a high-leverage design ensures easy cutting with less force needed. The slim head gets into confined spaces while the extended handles provide extra reach. The long nose is great for grabbing and looping wire.

Product description

These long reach needle nose pliers feature a dual-pivot design that proved increased jaw opening in tight spaces compared to regular long reach pliers. They are made from durable chrome-vanadium tool steel hand have a comfort grip, slip resistant handle. Ideal for use in confined space applications. Size 13-1/4".

• Dual pivot design allows for increased jaw opening in tight spaces
• Made from high quality chrome-vanadium tool steel
• Slip resistant comfort grip handle
• Ideal for use in confined space application
• Handle Length (in.) - 7. Nose length (in.) - 2.75

User questions & answers

Question:	Are these lightweight, like for gardening or jewelry making? or big gant industrial size
Answer:	The Klein J203-8N includes a stripping notch in the side cutter. The notch is for stripping 12AWG solid wire.Standard Supply ElectronicsAmazon Fulfillment
Question:	Do you expect they would be useful for pulling french fries and coins from between the car seats
Answer:	No, no they are not insulated.. the original responder should be held liable for responding in that way... insulated gear is multi layered, and undeniably marked as insulated to Vde/or Astm standards! For anyone who reads this... this pair is NOT INSULATED... Klein products will have part number J2000-48-INS and J2000-48. With the "INS" being the insulated portion.
Question:	Do these have serated gripping jaws or smooth jaws
Answer:	Ours is available within 3-5 business days.
Question:	how long of a reach
Answer:	The long nose pliers have a total length of 13 3/4 inchesThe bent nose pliers have a length of 13 1/2 inches

Product features

Specially designed for tight spaces

The Needle Nose Pliers from Zenith Industries have been specially designed for long reach, to get to tight spaces easily. What makes this possible is the dual pivot design, with the Handle Length (in.) - 7. Nose length (in.) - 2.75, allows for an extended jaw opening in confined spaces.

Tough construction, easy on hands

The pliers are made with high quality chrome-vanadium tool steel that makes it strong and long-lasting. Reaching to tight spaces exerts a lot of pressure on the hands, but with the Zenith Pliers, it’s not a worry anymore, the slip resistant comfort grip on the handle makes it easy to hold and use.

Product description

4 Pc 11"-Long Nose Plier Set, Heavy Duty Construction, Forged, Cushioned Comfort Grip Handles, 11" Straight Long Nose Pliers, 45 Degree Long Nose Pliers, 90 Degree Long Nose Pliers, "S"-Long Nose Pliers.

• Extra long 11 inch length heavy pliers suited for industrial, construction, home garage or professional automotive use
• Drop forged, high carbon steel construction and hardened teeth makes for a durable plier set
• Curved tip pliers facilitate easy access to hard-to-reach wires and cables at different angles; set includes straight, 45 and 90 degree angled pliers
• Precision riveted joint for smooth action, cross-cut teeth at tip provide omnidirectional gripping
• Textured nonslip rubber soft-grip is comfortable to hold, easy to grip while wet, insulated for cold weather use

User questions & answers

Question:	Do you have any branch in Afghanistan
Answer:	UUGGH!! Hate it when that happens!! Sorry, but you received a dud! The pliers should be perfectly aligned like any other pliers. Maybe yours got damaged somewhere in transit. Honestly, don't give up hope. Send them back and request a new pair. These pliers are really great for hobbies and crafts that require precision. Been using mine for several months now. Love them!! BTW, saw a few reviews that said theirs broke. Well not sure if they're using them to fix their car, cuz that's not what these are made for. Treat them right, and they'll easily become your new favorite tool.
Question:	How wide do the jaws open
Answer:	Thank you for your question. See specs below: SPECIALTY PLIERS Thin, short pliers for very delicate work 12mm long jaw with 1mm nose Steel: 3.0 mm Nose Pointed Jaws: Smooth Outside Edge: Flat We hope this helps! -American Hakko Products
Question:	Where are these manufactured
Answer:	I'm assuming you mean at the tip of the pliers, Yes they are less than 2mm thick. Each tip is about 1mm wide and .75mm thick as an approximation using a ruler and a magnifying glass (I don't have calipers on hand.) Hope this helps.