13 best japanese pole saw

Product description

What is “SUIZAN“?

SUIZAN, a Japanese brand, creates the highest quality Japanese hand tools.

With a history of over 100 years, all of the processes are completed in one of Japan’s towns known for their craftsmanship: Sanjō in Niigata prefecture.

That’s why our products are highly appreciated by many woodworkers.



One of the Japanese Tools

There are a couple of differences between Western tools and Japanese tools.

In many cases, Japanese tools are lighter and simpler than Western ones because Japanese tools are minimally designed and there is no unnecessary waste.

Nowadays, the Japanese tools has become a popular tool in woodcrafting around the world due to its high quality.



Do you know about a “Pull Saw“?

This product is a pull saw.

Japanese saws cut materials via pulling and thus are called “pull saws.”

It requires less power, realizes exceedingly smooth and accurate cut, and results that the cutting-section is clean.

And particularly this saw's blade is sharper and thinner (0.02 inch), and has a greater number of teeth per inch (9 & 15 TPI) than comparable saws of its size.



This is a Ryoba Saw

A remarkable point of this Ryoba (Double Edge) Saw is that there are two blades in one saw - Cross-Cut and Rip-Cut.

Therefore you don’t have to change your tools: you only have to use it!

It is for time-saving and space-saving in your tool box.



If you have some difficulty using Western saws, once get to use a Japanese saw.

You will never go back to a conventional saw!

• JAPANESE STYLE PULL SAW: This product is a “Pull Saw.” What most people are used to are European saws, which cut materials via pushing, thus are called “push saws.” On the other hand, Japanese saws cut materials via pulling and thus are called “pull saws,” which is what this product is. In comparison to “push saws,” “pull saws” are lighter in weight, requires less power, and the resulting edge is cleaner.
• JAPANESE STEEL: All SUIZAN Japanese saws are consisted of top quality japanese steel. It uses high quality Japanese steel, which makes cuts to be sharp.
• MADE IN JAPAN: All SUIZAN products are manufactured in Japan by Japanese master craftsmen.With a history of over 100 years in making japanese hand tools, all of the process gone into making tools were completed in one of Japan’s towns known for their craft making tradition: Sanjō in Niigata
• DIVERSIFY YOUR WOODWORKING LIFE: No matter you are a master or a beginner in using saws, it gives you brand new experience from using traditional Japanese style saws and enables you to make a wider variety of woodworking products, thus change your life!

User questions & answers

Question:	Does the blade come with a cover to protect the teeth when not using it
Answer:	I have cut 4X4 pine post to shape legs..it works perfectly fine. Be slow and it does its own work with super finish
Question:	id like to buy all the suizan product line are the blades replaceable ? if so where can i order the Blades
Answer:	Japanese saws are normally much too thin to track in a western mitre box .Also western saws you can alter the cut but japanese saws you can not .so if you go off course with a japanese saw it is better to start a different cut line.
Question:	Hope long do blades last
Answer:	It says 22 crosscut and 9 rip in the description.
Question:	What other saws should i buy for a started set in addition to this saw
Answer:	I don't believe there are any manufacturer's instructions in English. I own 3 Gyokucho Japanese Saws (including this one), and I found the best info regarding the proper use of this saw on that popular video site. Just do a search for "Using Japanese Pull Saws", and you will find a plethora of instructional videos. These saws do require a certain technique that is vastly different from their western counterparts, but once you see it done, you'll be able to start practicing it. And once you get the hang of it (mostly just a light touch and the proper cutting angle), you will really enjoy using this saw.

Product features

Do you know about a “Japanese Pull Saw“?

Japanese saws cut materials via pulling and thus are called “pull saws.” It requires less power, realizes exceedingly smooth and accurate cut, and results that the cutting-section is clean. And particularly this saw's blade is sharper and thinner, and has a greater number of teeth per inch than comparable saws of its size.

MADE IN JAPAN BY JAPANESE CRAFTSMEN

All SUIZAN products are manufactured in Japan by Japanese master craftsmen. While many other makers in Japan have shifted to creating products outside of Japan, we continues to plan, create trial products, and carry out product tests in our factory and are able to incorporate the fresh and new opinions of craftsmen. This allows us to ensure our high quality in our products.

Easy to interchange

The blades are easily removable and interchangeable. Links of blades are in all product links so you can easy to find them.

Over Fifty Thousand woodworkers Have Switched to SUIZAN

Over fifty thousand woodworkers, from executive woodworkers like professional carpenter, furniture maker, musical instrument makers to home carpentry and everyone in between, have switched to SUIZAN for our superior quality, unconditional support, and loyal community, and SUIZAN users are treated like family.

What is SUIZAN?

SUIZAN, a Japanese brand, creates the highest quality Japanese hand tools. With a history of over 100 years, all of the processes are completed in one of Japan’s towns known for their craftsmanship: Sanjō in Niigata prefecture. That’s why our products are highly appreciated by many woodworkers.

A Brand Ambassador of SUIZAN

Jonathan Katz-Moses is an entrepreneur, inventor, and content creator with a lust for teaching only surpassed by his love for coming up with unique solutions to everyday problems. His love for making things has been a life long addiction and in 2014 he decided he needed to chase that dream. Jonathan shares his love for woodworking on his self titled YouTube Channel and has invented several woodworking tools that can be found in 157 countries around the world. He is the inventor of The Katz-Moses Magnetic Dovetail Jig and The Katz-Moses No Deflection Stop Block. Jonathan produces a segment on his YouTube Channel called "Joint of the Week" where he showcases different joinery techniques using SUIZAN Saws.

Product description

SUIZAN japanese ryoba saw

• JAPANESE STYLE PULL SAW: This product is a “Pull Saw.” What most people are used to are European saws, which cut materials via pushing, thus are called “push saws.” On the other hand, Japanese saws cut materials via pulling and thus are called “pull saws,” which is what this product is. In comparison to “push saws,” “pull saws” are lighter in weight, requires less power, and the resulting edge is cleaner.
• JAPANESE STEEL: All SUIZAN Japanese saws are consisted of top quality japanese steel. It uses high quality Japanese steel, which makes cuts to be sharp.
• MADE IN JAPAN: All SUIZAN products are manufactured in Japan by Japanese master craftsmen.With a history of over 100 years in making japanese hand tools, all of the process gone into making tools were completed in one of Japan’s towns known for their craft making tradition: Sanjō in Niigata
• DIVERSIFY YOUR WOODWORKING LIFE: No matter you are a master or a beginner in using saws, it gives you brand new experience from using traditional Japanese style saws and enables you to make a wider variety of woodworking products, thus change your life!

User questions & answers

Question:	Are the sides marked so as to know which blade to do cross cuts and which side to use for rips
Answer:	The blade is rust-proof and will not rust. Please purchase with confidence. If you have any questions, please feel free to contact us. We value customer experience, especially product experience.
Question:	Why is the blade tapered in width
Answer:	The blade is rust-proof and will not rust. Please purchase with confidence. If you have any questions, please feel free to contact us. We value customer experience, especially product experience.
Question:	What are the specifications for this particular saw? Kerf, tpi, length
Answer:	The blade is rust-proof and will not rust. Please purchase with confidence. If you have any questions, please feel free to contact us. We value customer experience, especially product experience.
Question:	Is the blade flexible enough to use this saw to cut door casings and jambs in place to allow sliding a floating floor underneath
Answer:	You can easily cut branches up to 4-inches in diameter with this rust-resistant powerful handsaw!

Product features

Do you know about a “Japanese Pull Saw“?

Japanese saws cut materials via pulling and thus are called “pull saws.” It requires less power, realizes exceedingly smooth and accurate cut, and results that the cutting-section is clean. And particularly this saw's blade is sharper and thinner, and has a greater number of teeth per inch than comparable saws of its size.

MADE IN JAPAN BY JAPANESE CRAFTSMEN

All SUIZAN products are manufactured in Japan by Japanese master craftsmen. While many other makers in Japan have shifted to creating products outside of Japan, we continues to plan, create trial products, and carry out product tests in our factory and are able to incorporate the fresh and new opinions of craftsmen. This allows us to ensure our high quality in our products.

Easy to interchange

The blades are easily removable and interchangeable. Links of blades are in all product links so you can easy to find them.

Over Fifty Thousand woodworkers Have Switched to SUIZAN

Over fifty thousand woodworkers, from executive woodworkers like professional carpenter, furniture maker, musical instrument makers to home carpentry and everyone in between, have switched to SUIZAN for our superior quality, unconditional support, and loyal community, and SUIZAN users are treated like family.

What is SUIZAN?

SUIZAN, a Japanese brand, creates the highest quality Japanese hand tools. With a history of over 100 years, all of the processes are completed in one of Japan’s town known for their craftsmanship: Sanjō in Niigata prefecture. That’s why our products are highly appreciated by many woodworkers.

A Brand Ambassador of SUIZAN

Jonathan Katz-Moses is an entrepreneur, inventor, and content creator with a lust for teaching only surpassed by his love for coming up with unique solutions to everyday problems. His love for making things has been a life long addiction and in 2014 he decided he needed to chase that dream. Jonathan shares his love for woodworking on his self titled YouTube Channel and has invented several woodworking tools that can be found in 157 countries around the world. He is the inventor of The Katz-Moses Magnetic Dovetail Jig and The Katz-Moses No Deflection Stop Block. Jonathan produces a segment on his YouTube Channel called "Joint of the Week" where he showcases different joinery techniques using SUIZAN Saws.

Product description

Do you know about a “Japanese Pull Saw“?

Japanese saws cut materials via pulling and thus are called “pull saws.” It requires less power, realizes exceedingly smooth and accurate cut, and results that the cutting-section is clean. And particularly this saw's blade is sharper and thinner, and has a greater number of teeth per inch than comparable saws of its size.



MADE IN JAPAN BY JAPANESE CRAFTSMEN

All SUIZAN products are manufactured in Japan by Japanese master craftsmen. While many other makers in Japan have shifted to creating products outside of Japan, we continues to plan, create trial products, and carry out product tests in our factory and are able to incorporate the fresh and new opinions of craftsmen. This allows us to ensure our high quality in our products.



FEATURES AND BENEFITS

*Lighter in weight!

*Requires less power!

*The resulting edge is cleaner!

*Very narrow kerf

*Smooth and accurate cut

*Sharp and thin blade



Suitable Blade for Hardwood and Softwood

TPI: 17 and 25 TPI, Blade thickness: 0.012 inch, Kerf width: 0.012 inch.

Thin and sharp teeth can cut off excess wood cleanly. The blade for hardwood has a special shape so that the blade will last for a long time.



Over Fifty Thousand woodworkers Have Switched to SUIZAN

Over fifty thousand woodworkers, from executive woodworkers like professional carpenter, furniture maker, musical instrument makers to home carpentry and everyone in between, have switched to SUIZAN for our superior quality, unconditional support, and loyal community, and SUIZAN users are treated like family.



What is SUIZAN?

SUIZAN, a Japanese brand, creates the highest quality Japanese hand tools. With a history of over 100 years, all of the processes are completed in one of Japan’s towns known for their craftsmanship; Sanjō in Niigata prefecture. That’s why our products are highly appreciated by many woodworkers.

• JAPANESE STYLE PULL SAW: This product is a “Pull Saw.” What most people are used to are European saws, which cut materials via pushing, thus are called “push saws.” On the other hand, Japanese saws cut materials via pulling and thus are called “pull saws,” which is what this product is. In comparison to “push saws,” “pull saws” are lighter in weight, requires less power, and the resulting edge is cleaner.
• JAPANESE STEEL: All Suizan japanese saws are consisted of top quality japanese steel. It uses high quality Japanese steel, which makes cuts to be sharp.
• BLADE FOR HARDWOOD AND SOFTWOOD: You can easily cut oak, sandalwood, ebony, mahogany, maple, walnut and pine by robust blade for hardwood. The blade for softwood can be used for white cedar, Japanese cedar, larch, paulownia wood and so on.
• MADE IN JAPAN: All SUIZAN products are manufactured in Japan by Japanese master craftsmen.With a history of over 100 years in making japanese hand tools, all of the process gone into making tools were completed in one of Japan’s towns known for their craft making tradition: Sanjō in Niigata
• DIVERSIFY YOUR WOODWORKING LIFE: No matter you are a master or a beginner in using saws, it gives you brand new experience from using traditional Japanese style saws and enables you to make a wider variety of woodworking products, thus change your life!

User questions & answers

Question:	Is this made from hardened steel
Answer:	ours is the 40"; I can't comment on 24", sounds pretty small.
Question:	Weight and dimensions
Answer:	Yes
Question:	I use round, through, wedged, tenons ~ 2-3", benches and tables and want a saw larger flush cut saw for triming the ends-which flush cut saw
Answer:	A 3 month old does not yet crawl, let alone swing unstrapped on an disc. A 3 year old would enjoy it. We have had a few 3, 4 and 5 year-olds on ours under close supervision.
Question:	Is this hard to get out of the sheath
Answer:	I’m not sure on the flags, but they have Velcro on them so you can just take them off if they get faded

Product features

Do you know about a “Japanese Pull Saw“?

Japanese saws cut materials via pulling and thus are called “pull saws.” It requires less power, realizes exceedingly smooth and accurate cut, and results that the cutting-section is clean. And particularly this saw's blade is sharper and thinner, and has a greater number of teeth per inch than comparable saws of its size.

MADE IN JAPAN BY JAPANESE CRAFTSMEN

All SUIZAN products are manufactured in Japan by Japanese master craftsmen. While many other makers in Japan have shifted to creating products outside of Japan,we continues to plan, create trial products, and carry out product tests in our factory and are able to incorporate the fresh and new opinions of craftsmen.This allows us to ensure our high quality in our products.

Suitable Blade for Hardwood and Softwood

TPI: 17 and 25 TPI, Blade thickness: 0.012 inch, Kerf width: 0.012 inch.

Thin and sharp teeth can cut off excess wood cleanly. The blade for hardwood has a special shape so that the blade will last for a long time.

Over Fifty Thousand woodworkers Have Switched to SUIZAN

Over fifty thousand woodworkers, from executive woodworkers like professional carpenter, furniture maker, musical instrument makers to home carpentry and everyone in between, have switched to SUIZAN for our superior quality, unconditional support, and loyal community, and SUIZAN users are treated like family.

What is SUIZAN?

SUIZAN, a Japanese brand, creates the highest quality Japanese hand tools. With a history of over 100 years, all of the processes are completed in one of Japan’s town known for their craftsmanship: Sanjō in Niigata prefecture. That’s why our products are highly appreciated by many woodworkers.

A Brand Ambassador of SUIZAN

Jonathan Katz-Moses is an entrepreneur, inventor, and content creator with a lust for teaching only surpassed by his love for coming up with unique solutions to everyday problems. His love for making things has been a life long addiction and in 2014 he decided he needed to chase that dream. Jonathan shares his love for woodworking on his self titled YouTube Channel and has invented several woodworking tools that can be found in 157 countries around the world. He is the inventor of The Katz-Moses Magnetic Dovetail Jig and The Katz-Moses No Deflection Stop Block. Jonathan produces a segment on his YouTube Channel called "Joint of the Week" where he showcases different joinery techniques using SUIZAN Saws.

Product description

Product description The Razorsaw 7" Double Edge Ryoba Saw made by Gyokucho has a blade length of 7" and an overall length of 15". The cross cut side has 19tpi, and the rip side has 9 tpi. A unique feature of the Gyokucho Ryoba Saws is the handle which can be tilted in relation to the blade. This allows access into areas otherwise awkward or impossible to reach. Carpenters, restoration workers and boat builders will find this feature particularly useful. The teeth are impulse hardened for extended wear. The handles are wrapped with rattan for a secure grip. The various blades can be interchanged. This Gyokucho saw has been designed to easily fit into a tool box or work bag. Use #155638 for replacement blade. Features: Blade length 7" Overall length 15" Tilted handle allows access to awkward places Compact enough to fit in tool bag From the Manufacturer Perfect for cross cutting or ripping of smaller stock. Blade has 17 teeth per inch on the cross cutting side and 6 teeth per inch on the rip side. Overall length of about 18 inches with a fantastic, comfortable, contoured plastic grip. Small kerfs and accurate cuts will result from the quality, balance, and design of these saws.

• Modern variation of the traditional Japanese pull-stroke saw
• 2 saws in 1
• Use finer side for crosscut work
• Turn over to use for rip work
• .5mm thick blade gives a fine kerf

User questions & answers

Question:	How long is the blade? Can it be used for crosscuts and rips in hardwood
Answer:	The blade is 7 and 3/16 inches long. Coarse teeth on one side of the blade and fine teeth on the other side enable both ripping and crosscutting with the same blade. I have used these saws for years. You can do very fine work with them, and if you are careful they will last for a long time. They are superior to any American saw for small handwork.
Question:	What are the exact dimensions for the blade? I am Looking for height from teeth to spine, kerf, and length of cutting portion of the blade
Answer:	cutting portion of blade is 18 centimeters; 5 1/2 centimeters at the short end of blade; 7 centimeters at the long end of the blade; kerf is 1 millimeter.
Question:	Where is this saw made
Answer:	they are made in japan and they are the best i have had. much sharper than any others i have bought. would highly recommend.
Question:	Is this saw really durable? Can it used for tennon cutting? Can it be sharpen
Answer:	This is a very good saw. I don't know if you're familiar with Japanese saws already, but they cut on the pull stroke. If you position yourself so that you are holding the saw at a 45 degree angle with the tip of the handle pointing towards the floor and pulling down into the cut, kind of like crouching in front of the wood with the wood higher than your hand, you will get the best results. I had a tendency at first to hold the saw like a western saw that you would PUSH into the cut, holding the handle above the wood with the saw plate angled down to the wood and the handle higher than the saw plate like I wanted to push the saw-cut down into the wood. That does not work. If used on the downward pull-stroke, this saw cuts super-clean. You could cut tenons with this saw, but I have found I use this saw more for odds and ends. It's very small and not as precise as some of the other gyokucho saws. If you want to cut great tenons and dovetails, then go with one of the gyokucho saws with the longer white colored handles. I bought the 303 on Amazon too and it is great for joinery. And it's only like 10 dollars more. Well worth it. And no, the blade cannot to be sharpened, but the teeth are induction hardened, and when eventually they dull, you can order a replacement blade that is very easy to replace onto the handle. And when you buy only the replacement blade it's very affordable.

• JAPANESE STYLE PULL SAW: This product is a “Pull Saw.” What most people are used to are European saws, which cut materials via pushing, thus are called “push saws.” On the other hand, Japanese saws cut materials via pulling and thus are called “pull saws,” which is what this product is. In comparison to “push saws,” “pull saws” are lighter in weight, requires less power, and the resulting edge is cleaner.
• JAPANESE STEEL: All SUIZAN Japanese saws are consisted of top quality japanese steel. It uses high quality Japanese steel, which makes cuts to be sharp.
• MADE IN JAPAN: All SUIZAN products are manufactured in Japan by Japanese master craftsmen.With a history of over 100 years in making japanese hand tools, all of the process gone into making tools were completed in one of Japan’s towns known for their craft making tradition: Sanjō in Niigata
• DIVERSIFY YOUR WOODWORKING LIFE: No matter you are a master or a beginner in using saws, it gives you brand new experience from using traditional Japanese style saws and enables you to make a wider variety of woodworking products, thus change your life!

User questions & answers

Question:	how many teeth per inch
Answer:	15 to 30 depending upon the style. T%here is a table on Amazon but it does not list the 7 inches but this puts you in the ballpark.
Question:	I took down a pergola so now I have six 4” square posts protruding from the concrete patio. I'd like to cut them off flush. Will one of these do it
Answer:	As described, the cutting edge is 7", but due to the spline on the back of the blade (you can see in the photo), the "working" edge is 6" which would limit you to a 2" cutting stroke. It would be tedious at best. I would think a better process for what you want to do is cut it close with any kind of saw available and then "grind" it flush with a shaper blade on a hand grinder. Maybe someone makes a bigger version of this saw. I would not attempt to do what you want with this specific saw.
Question:	will the 7 inch blade fit the 6 inch saw
Answer:	You would have to contact the SUIZAN web site.
Question:	How do I purchase a replacement blade for this? The Amazon link from your website takes me to a new saw, not a replacement blade
Answer:	I had the same problem at first. Easy way: type in Suizan replacement blades, and it takes you to the site, Multiple blade choices. Good saws. As fine as the teeth are I'm surprised they last as long as they do.

Product features

Do you know about a “Japanese Pull Saw“?

Japanese saws cut materials via pulling and thus are called “pull saws.” It requires less power, realizes exceedingly smooth and accurate cut, and results that the cutting-section is clean. And particularly this saw's blade is sharper and thinner, and has a greater number of teeth per inch than comparable saws of its size.

MADE IN JAPAN BY JAPANESE CRAFTSMEN

All SUIZAN products are manufactured in Japan by Japanese master craftsmen. While many other makers in Japan have shifted to creating products outside of Japan,we continues to plan, create trial products, and carry out product tests in our factory and are able to incorporate the fresh and new opinions of craftsmen.This allows us to ensure our high quality in our products.

Easy to interchange

The blades are easily removable and interchangeable. Links of blades are in all product links so you can easy to find them.

Over Fifty Thousand woodworkers Have Switched to SUIZAN

Over fifty thousand woodworkers, from executive woodworkers like professional carpenter, furniture maker, musical instrument makers to home carpentry and everyone in between, have switched to SUIZAN for our superior quality, unconditional support, and loyal community, and SUIZAN users are treated like family.

What is SUIZAN?

SUIZAN, a Japanese brand, creates the highest quality Japanese hand tools. With a history of over 100 years, all of the processes are completed in one of Japan’s town known for their craftsmanship: Sanjō in Niigata prefecture. That’s why our products are highly appreciated by many woodworkers.

A Brand Ambassador of SUIZAN

Jonathan Katz-Moses is an entrepreneur, inventor, and content creator with a lust for teaching only surpassed by his love for coming up with unique solutions to everyday problems. His love for making things has been a life long addiction and in 2014 he decided he needed to chase that dream. Jonathan shares his love for woodworking on his self titled YouTube Channel and has invented several woodworking tools that can be found in 157 countries around the world. He is the inventor of The Katz-Moses Magnetic Dovetail Jig and The Katz-Moses No Deflection Stop Block. Jonathan produces a segment on his YouTube Channel called "Joint of the Week" where he showcases different joinery techniques using SUIZAN Saws.

• TOP QUALITY KAKURI JAPANESE TRADITIONAL FLUSH CUT SAW: A High-quality Japanese hand saw for cutting wood materials. Small and lightweight, easy to use, ideal for DIY and precise woodworking. The smooth cut surface of the wood and with comfortable sharpness feel has been realized by a special fine-tooth of the handsaw. Japanese pull saws enable to cut the wood evenly with minimal force by cutting with pulling force.
• COMFORTABLE WOODEN GRIP & BLADE COVER: Adopted high-quality wooden handle used by Japanese carpenters. The gentle and non-slip grip makes your woodwork more enjoyable. The special plastic blade sleeve case makes it easy to carry and safe to store.
• 2 TYPES DOUBLE EDGED RYOBA BLADE: Assuming every woodworking scene, the double-edged blade has two types of blades on the left and right. One is a crosscuts blade that cuts at right angles or crosses to the grain, another is a rip cut blade that cuts parallel to the grain.
• OFFICIAL ENGLISH INSTRUCTION & TOP QUALITY JAPANESE TOOL: KAKURI Official English instruction is included. Only Japanese high-grade materials are used. The blade is razor-sharp and durable. All KAKURI brand products are manufactured in Japan and handcrafted by Japanese craftsmen.
• PRODUCT SPECIFICATIONS: Made in Japan / Blade: Japanese high carbon tool steel / Blade Length: 7 inches / Overall Size: 2.1×0.7×14.7 inches / Weight: 2.6 oz

Product features

Authentic Japanese Craftsmanship Brand

Japanese traditional style "Pull Saw"

Japanese wood saw cut the material by not pushing force but pulling force. It is called “pull saw.” Because the special blade teeth maximize the pulling force to the wood, it performs more accurate cutting with a light force. The teeth pitch is designed to enable efficient woodworking by selecting a blade that matches the size of the wood.

MADE IN SANJO, JAPAN BY JAPANESE CRAFTSMEN

All KAKURI products are manufactured in Japan by Japanese master craftsmen. The skills and craftsmanship that have consistently manufactured carpentry tools since 1946 reside in each saw. Please feel the authentic Japanese quality tools.

Razor-Sharp Top Quality Japanese Steel Blade

A genuine Japanese tool made by Japanese craftsmen using only Japanese high-grade steel. Tough & Heavy-duty teeth realizes excellent sharpness and long durability.

Rip & Cross Cutting

Double-edged blades can be used by rip cut pulling parallel to the grain and cross cut pulling vertical to the grain. This one saw can handle any types of wood and cutting.

Safe Blade Case

Blades can be stored safely in a special plastic case. Safe to carry to your woodworking workshop.

Product description

It is the mini size of the super precision saw. [Use] Saw for general wood, sheet, plywood and balsa. [functions and features] The replacement blades are compatible in the mini panel saw series. Beautiful cut skin, perfect for work and cutting small materials. The replacement blade is hook type, so it can be put on and taken off easily and quickly. The finest (Pitch 1.00 mm) crosscut saw. The pattern of the mini panel saw series is available. [Specification] Blade length: 150 mm. Pitch: 1.0 mm. Thickness: 0.3 mm. Cut width: 0.4 mm. All wisteria rolls. [Material] Blade: SK4. Pattern: Sawa Kurumi (walnut).

• Beautiful cut skin, perfect for work and cutting small materials.
• Blade length: 150mm(5.9 in), Total length: 370mm(14.6 in).
• Replacement blade hook type.
• Thickness: 0.30mm.
• Blade: Carbon Tool Steel 4 kinds (SK4) Handle: walnut.

User questions & answers

Question:	Can I use this saw for cutting kumiko strips
Answer:	You should be able to buy it’s not that fine. I’d go with a finer larger dozuki for that. I’m a furniture maker and use kumiko for much of my work. If recomend getting one with at least 22tpi if you are doing very thin strips like 1-3mm thick 1/16-1/8”. If doing much thicker beginners work I’d say this would be fine just not large enough so still would recommend a larger one.
Question:	Think this will cut a 4 x 8 bamboo strip sheet. It's flimsy since it's only 1/16 inch thick. lifting motion cause trouble cutting
Answer:	Yes. This saw is VERY sharp.
Question:	How many teeth per inch does the blade have? (A metric answer is OK too
Answer:	Blade Length : 150mmPitch : 1.00mmThickness : 0.30mmKerf : 0.40mmCompact saw body with the finest blade of Z-saw Dozuki back saw series, ideal for extremely intricate and precise works on general wood materials. The maximum cutting depth of the blade is 38mm.
Question:	What is the maximum thickness of wood can this saw cut for dovetails
Answer:	i've cut boards up to 2" thick

Product description

The Corona folding razor tooth saw is extremely fast & efficient. Each razor tooth saw blade goes through 4 Manufacturing processes for maximum durability, hardness & friction reduction. Available in a variety of blade sizes.

Founded in the early 1920s, Corona is a leader in the marketing and manufacturing of professional and consumer tools for the lawn and garden, landscape, irrigation, construction and agriculture markets. With a retail and distribution network that extends throughout the United States and Canada, Corona’s proven designs, quality manufacturing processes and unparalleled customer service make it the best choice in tools for contractors, agricultural professionals and avid gardeners alike. Limited lifetime warranty.

From the Manufacturer

Founded in the early 1920s, Corona is a leader in the marketing and manufacturing of professional and consumer tools for the lawn and garden, landscape, irrigation, construction and agriculture markets. With a retail and distribution network that extends throughout the United States and Canada, Corona’s proven designs, quality manufacturing processes and unparalleled customer service make it the best choice in tools for contractors, agricultural professionals and avid gardeners alike. Limited lifetime warranty.

• 3 SIDED RAZOR TEETH FOR EFFICIENT CUTTING: 10" blade is ideal for cutting 5" - 6" diameter, small to medium, branches
• ERGONOMICALLY DESIGNED, COMFORTABLE, CO-MOLDED HANDLE: Provides a comfortable grip for extended use
• EASY TO LATCH BLADE PREVENTS INJURY WHEN NOT IN USE: Folding blade is curved, taper-ground, and replaceable
• IMPULSE HARDENED TEETH FOR LONG SERVICE LIFE: Extends the life of the tool season after season
• UP TO 6 TEETH PER INCH AND CURVED BLADE DESIGN FOR FASTER CUTTING: Cuts are smoother and quicker than a traditional saw.

User questions & answers

Question:	Does the 10-inch model have replacement curved blades as the 7-inch model seems to
Answer:	It's not a true flush cutting saw but depending on the specific position of the cut it will get very close to a flush cut. I think Zona saws are great generally better than xacto. There are true flush cutting saws available.
Question:	Is the blade flimsy or thick like a knife? Does the blade bend when cutting
Answer:	The width of the saw blade from teeth to the edge of the rib of the saw is 1 1/8 inch.
Question:	Where is it made
Answer:	The ".010 - inch kerf" is your answer.
Question:	OK how much does it realy weigh ??? one guy says less then a pound the other says 3 pounds. Does anybody know
Answer:	I use mine both ways with good results, but predominantly for cross cutting. The stiffener on the back pretty much limits use for ripping. Not to disagree with Old Sailor who probably has better eyes, but under my magnifying lamp it really appears to be a ripcut with no set. Whichever, they are very good and useful saws. I have been using them for 35 or 40 years.

Product description

What is “SUIZAN“?

SUIZAN, a Japanese brand, creates the highest quality Japanese hand tools.

With a history of over 100 years, all of the processes are completed in one of Japan’s towns known for their craftsmanship: Sanjō in Niigata prefecture.

That’s why our products are highly appreciated by many woodworkers.



One of the Japanese Tools

There are a couple of differences between Western tools and Japanese tools.

In many cases, Japanese tools are lighter and simpler than Western ones because Japanese tools are minimally designed and there is no unnecessary waste.

Nowadays, the Japanese tools has become a popular tool in woodcrafting around the world due to its high quality.



Do you know about a “Pull Saw“?

Japanese saws cut materials via pulling and thus are called “pull saws.”

It requires less power, realizes exceedingly smooth and accurate cut, and results that the cutting-section is clean.

And particularly this saw's blade is sharper and thinner (0.012 inch), and has a greater number of teeth per inch (25 TPI) than comparable saws of its size.



This is a Dozuki Saw

Remarkable points of this Dozuki (Dovetail) Saw is the awesome thin blade and 6 inch best handling size. Have you ever seen such a amazing saw? This is made in Japan quality.

And it’s consisted of top quality Japanese steel. It combines durableness, sensitivity and powerfulness.



If you have some difficulty using Western saws, once get to use a Japanese saw.

You will never go back to a conventional saw!

• JAPANESE STYLE PULL SAW: This product is a “Pull Saw.” What most people are used to are European saws, which cut materials via pushing, thus are called “push saws.” On the other hand, Japanese saws cut materials via pulling and thus are called “pull saws,” which is what this product is. In comparison to “push saws,” “pull saws” are lighter in weight, requires less power, and the resulting edge is cleaner.
• JAPANESE STEEL: All SUIZAN Japanese saws are consisted of top quality japanese steel. It uses high quality Japanese steel, which makes cuts to be sharp.
• MADE IN JAPAN: All SUIZAN products are manufactured in Japan by Japanese master craftsmen.With a history of over 100 years in making japanese hand tools, all of the process gone into making tools were completed in one of Japan’s towns known for their craft making tradition: Sanjō in Niigata
• DIVERSIFY YOUR WOODWORKING LIFE: No matter you are a master or a beginner in using saws, it gives you brand new experience from using traditional Japanese style saws and enables you to make a wider variety of woodworking products, thus change your life!

User questions & answers

Question:	Does this saw work well with hardwoods
Answer:	China, and poorly made as well. The saw will arrive stuck in the case.
Question:	is this price for one thing
Answer:	No it does not have an extension. It is a basic close up cutting saw that works very well. If you want to get beyond your reachI would suggest another saw.
Question:	Will this cut through bone
Answer:	Cuts mainly on the pull-stroke. That's where the curve of the blade becomes effective as it "dives" deeper removing material on the frontside of the cut leaving less material to cut on the next stroke and so on.
Question:	What materials were used in making the handle for this saw? It is difficult to tell from the photos if the bands are bamboo, plastic or
Answer:	I just received mine and had this problem. The blade was protruding from the end of the scabbard and I think it was forcibly inserted and become stuck. I tapped the protruding part of the saw blade with a hammer until it popped back in the scabbard. Now I can remove it without too much difficulty.

Product features

Do you know about a “Japanese Pull Saw“?

Japanese saws cut materials via pulling and thus are called “pull saws.” It requires less power, realizes exceedingly smooth and accurate cut, and results that the cutting-section is clean. And particularly this saw's blade is sharper and thinner, and has a greater number of teeth per inch than comparable saws of its size.

MADE IN JAPAN BY JAPANESE CRAFTSMEN

All SUIZAN products are manufactured in Japan by Japanese master craftsmen. While many other makers in Japan have shifted to creating products outside of Japan,we continues to plan, create trial products, and carry out product tests in our factory and are able to incorporate the fresh and new opinions of craftsmen. This allows us to ensure our high quality in our products.

Easy to interchange

The blades are easily removable and interchangeable. Links of blades are in all product links so you can easy to find them.

Over Fifty Thousand woodworkers Have Switched to SUIZAN

Over fifty thousand woodworkers, from executive woodworkers like professional carpenter, furniture maker, musical instrument makers to home carpentry and everyone in between, have switched to SUIZAN for our superior quality, unconditional support, and loyal community, and SUIZAN users are treated like family.

What is SUIZAN?

SUIZAN, a Japanese brand, creates the highest quality Japanese hand tools. With a history of over 100 years, all of the processes are completed in one of Japan’s town known for their craftsmanship: Sanjō in Niigata prefecture. That’s why our products are highly appreciated by many woodworkers.

A Brand Ambassador of SUIZAN

Jonathan Katz-Moses is an entrepreneur, inventor, and content creator with a lust for teaching only surpassed by his love for coming up with unique solutions to everyday problems. His love for making things has been a life long addiction and in 2014 he decided he needed to chase that dream. Jonathan shares his love for woodworking on his self titled YouTube Channel and has invented several woodworking tools that can be found in 157 countries around the world. He is the inventor of The Katz-Moses Magnetic Dovetail Jig and The Katz-Moses No Deflection Stop Block. Jonathan produces a segment on his YouTube Channel called "Joint of the Week" where he showcases different joinery techniques using SUIZAN Saws.

• This is a saw for craftsmen made using traditional Japanese methods "MOROTEGAKE".
• The vertical lines on the surface of blades made with the "MOROTEGAKE" technique reduce the drag of each stroke and smoothly remove shavings.
• The double bladed saw has a ripping blade and a crosscutting blade.
• Blade length: 7.1 inches, total length: 17.7 inches, weight: 3.85 ounces. Made in Japan.
• [Important] Japanese saws are pull saws. If you try to saw in a pushing motion the blade may be damaged.

User questions & answers

Question:	Are replacement blades available for these
Answer:	Nothing to replace here. This has a one peice blade and tang. It should stay sharp for a long long time.
Question:	Will this saw cut green wood effectively
Answer:	It will cut green wood. As with any fine tooth saw the moisture content of the wood makes binding more prevalent. You may have to clear saw dust more often.
Question:	How do I know which side is the crosscut and which is the rip cut
Answer:	Rip cut is with the big teeths ! Cross cut is with the fine small ones.
Question:	In the description it says “ However, they are not suitable for hardwood.” what would be suitable for hardwood? This
Answer:	I have used the particular saw with hardwood and it was completely satisfactory.

Product features

RYOBA (Double Bladed Saw)

The double bladed saw has a ripping blade and a crosscutting blade.

The Rip-Cut Blade

The rip-cut blade is for cutting along the wood grain.

Crosscut blade

It's used when cutting across the grain and has a smaller tooth pitch than the rip-cut blade.

• DOUBLE-DUTY TREE PRUNING SAW – New 2020 model featuring the DocaPole Double-Duty Extension Pole with 2X the strength of the original – Guaranteed to be the absolute best high-reach dual-use pruning saw on the market today – Two great uses in One saw! Use as a pole saw for pruning high or hand-held saw for pruning and grooming low
• USE ON THE DOCAPOLE OR BY HAND –.The new Double-Duty GoSaw Extension Pole features double-strength aluminum walls at twice the thickness of the original GoSaw Pole, providing extra strength for the rigors of pruning – For jobs on the ground, just unscrew the GoSaw and saw by hand
• RAZOR SHARP - Razor sharp 13-inch bi-directional cut w/3X tooth design. Sturdy, lightweight handle with comfort grip. Use on the pole or remove and use by hand.
• HIGH REACH AND READY TO GO - Fully assembled and ready to go out of the box, providing up to 28’ of pruning reach when used while standing. For optimal performance, always extend and use the thicker, lower pole segments first if not using at full extension to reduce flex.
• MULTI-USE PREMIUM EXTENSION POLE - High-quality aluminum telescoping pole that can be used with a wide variety of attachments to accomplish all your hard-to-reach tasks; features a standard ACME threaded metal tip

User questions & answers

Question:	Do they make a sheath for the blade
Answer:	No, it does not include bar oil.
Question:	Are replacement blades readily available
Answer:	Yes, the chain can be sharpened.
Question:	Where can I get a motorized , or battery operated 30feet adjustable pruning pole with saw
Answer:	Includes standing height.
Question:	where is this made
Answer:	Yes, CMCCSP20M1 includes: (1) CMCCSP20 V20* Pole Chainsaw (1) CMCB402 V20* 4.0 Ah Battery (1) V20* Lithium Ion Charger (1) Instruction Manual (1) Extension Pole

Product features

The only Double-Duty extension pole you will ever need plus the best pruning saw

The DocaPole GoSaw with 24 Foot DOUBLE-DUTY Extension Pole is the perfect long-reach solution for pruning high limbs and branches. At twice the thickness and twice the strength of our regular DocaPole, the Double-Duty DocaPole is optimized for the toughest tasks and extends from 6 feet to 24 feet. The premium GoSaw can be also used as a hand-held saw for grooming lower branches, thick brush, and small logs. The GoSaw and extension pole provide up to 30 feet of reach when used standing, making it the ideal way to reach any stubborn branch without a ladder.

Compatible with any standard threaded attachments, the Double-Duty DocaPole is the ultimate high-reach/long-reach/far-reach telescopic pole.

(other attachments sold separately)

Durable, versatile Double-Duty design

• 2X Thickness
• 2X Strength
• Lightweight, high-quality aluminum
• Thumb levers clasps allow for easy pole extension and retraction
• Adjust from 6 to 24 feet
• Foam-padded grip for comfortable use

Super Sharp

• Razor sharp 13 inch blade
• Precision taper-ground teeth for efficient sawing
• Bi-directional cutting action works on both the push and the pull stroke
• Chrome plate finish provides a smooth cut
• Resists rust and extends the life of the blade

Versatile

• Two great uses in one saw
• Use as a pole saw for pruning high limbs and branches
• Use as a hand-held saw for pruning and grooming lower branches, brush, and logs
• Sturdy, lightweight handle with comfort grip

Durable

• Removable threaded insert is compatible with all standard threaded extension poles
• Internal locking set screw positively locks the handle securely into place for confidence while cutting

Stay off the ladder. Stay Safe.....Get the job done with the DocaPole GoSaw and Double-Duty extension pole!

(other DocaPole accessories sold separately)

• Guaranteed to be the absolute best dual-use pruning saw and tree pruner on the market today.
• Two great uses in One saw! Use as a pole saw for pruning high limbs or branches or as a hand-held saw for pruning and grooming lower branches, brush, and logs.
• Razor sharp 13-inch bi-directional cut w/3X tooth design. Durable, rust-resistant hard-chrome plate finish provides a smooth cut and extends the life of the blade. Sturdy, lightweight handle with comfort grip.
• Fits all standard acme-threaded extension poles or long handles (pole NOT included). Best to use with metal tipped poles, such as the 12’ or 24’ DocaPole Extension Pole
• Fully assembled and ready to go out of the box. 100% satisfaction guarantee.

User questions & answers

Question:	What replacement blade does this use
Answer:	We have our own replacement blades for the "GoSaw" and will make them available on Amazon.com this week. This saw is a fairly recent addition to our line and most customers have not used it enough to need a new blade. But we have them and will start a new listing by Tuesday after the holiday. Thanks for asking. Jim the Owner.
Question:	Can the blade be sharpened
Answer:	Noah, Thanks for you inquiry. Yes, the teeth of the GoSaw blade can be sharpened. It does take some work and correct type of file but, if you know how to do it, it can be done. If you keep the blade lightly oiled before and after pruning, the blade will stay sharp longer. Oil will help keep sap from gumming up the teeth. I hope this answers your question. Thanks. Jim the Owner
Question:	Does it come with a cover, or is one available for it
Answer:	It comes in a thin cardboard sheath. It wouldn't serve well as a rugged cover to withstand rolling sound with other tools, but it works well for simple protection around the house. I use it.
Question:	Fit's mr. long arm? 3/4 acme threads
Answer:	Yes, the threaded insert used for the "GoSaw" is compatible with the acme-threaded tips on all Mr. LongArm poles. Please note that we have found the metal acme tip on the 16ft. Mr. LongArm pole sold at Home Depot is slightly longer than the tip on some of their other poles. The "GoSaw" still fits the tip on the 16ft pole but may need a firm last turn to fully seat. Use of the Set Screw on the underside of the handle will ensure the saw will stay secure on the tip of the Mr. LongArm pole (or any acme-threaded tip). I hope this reply answers your question. Jim the Owner.

Product features

The Ultimate Pruning Attachment

DocaPole GoSaw Pole and Hand Pruning Saw

The fabulous DocaPole BIG-REACH "GoSaw" is the new must-have tool for home owners, property managers and landscape professionals in need of a simple solution for light-duty pruning high and low. Two saws in One! The multi-mount handle-grip design allows the "GoSaw" to be used as a pole saw or a hand-held pruning saw. Mounts to any standard acme-threaded extension pole or long handle (Pole NOT included). The threaded insert can also be removed so the saw can mount to non-threaded pruning poles. Super sharp 13-inch blade with precision-ground 3-sided tooth design and bi-directional cutting action. Durable, rust-resistant hard-chrome plate finish provides a smooth cut and extends the life of the blade. Comfort-grip handle design takes the pain and suffering out of pruning by hand. Internal set screw locks the handle securely into place for smooth, easy cuts. Poles are NOT included with the "GoSaw" product set.

(DOCAPOLE SOLD SEPARATELY)

Use By Hand or Mount on Extension Pole

The DocaPole GoSaw Pruner will get the job done! Combine it with a 24' DocaPole Extension Pole for the Ultimate High-Reach Pruning Solution!

• Mount on pole or use by hand
• 13" razor sharp bi-directional cut
• 3X-sided taper-ground tooth design
• Secure-fit locking screw

(DOCAPOLE SOLD SEPARATELY)

Stay off the ladder. Stay off the roof. Stay Safe.....Get the job done with DocaPole!

(24 Foot DocaPole Extension Pole sold separately)

Product description

If you are searching for a clever and practical pull saw, then you should end your search here. With this japanese pull saw, put the samurai moves on a slab of cedar. You're in for a pleasant awakening.



No matter you are a master or a beginner in using saws, you can control it with ease.





Great Japanese Saw for logs and timbers



Use them to the pull saw:





PVC&ABS PIPES



MEDIUM CROSSCUT BAMBOO



GARDEN PRUNING



WOODWORKING



MDF PLYWOOD MATERIALS



MANY OF OTHER APPLICATIONS





Why Choose This Japanese Pull Saw?



Ergonomics TPR handle



Lighter In Weight



Requires Less Power



Blade Replaceable



The Resulting Edge Is Cleaner



Very Narrow Kerf



Smooth And Accurate Cut



Sharp And Thin Blade



Quality You Can Trust



We've designed our japanese saw using SK5 steel which is rustproof, sturdy for years of use. Japanese hand saw is 0.023 inch thick, 10 inch long flexible double edge blade and 12.5 inch Ergonomics TPR handle (overall length is 22.5 inch),



can handle size for highly precision woodworking and provides accurate cuts with much less effort.

• 👍👍【2 Saws in 1】Our japanese hand saw with impulse hardened teeth for extended wear. the 18 TPI triple-cut sawteeth finer side for highly precision crosscut work the other side 6TPI to 10TPI for ripping. Ideal for medium crosscut bamboo, Iogs,timbers,PVC&ABS pipes,MDF PLYWOOD MATERMLS.
• 👍👍【0.023 inch Blade】The 0.023 inch thick, 10 inch long blade consisted of TOP QUALITY JAPANESE STEEL Gives a Fine Kerf, handling size for highly precision work and provides accurate cuts with much less effort.
• 👍👍【Blade Replaceable】plastic head thumb screws, making it very quick and easy to break the saw down
• 👍👍【Ergonomics TPR handle】The ergonomic handles are wrapped with Thermal Plastic Rubber for a secure grip.
• 👍👍【PREMIUM QUALITY】Our products have been inspected by a reputable third party inspection company. Each product has been checked, put under a durability and functionality test before shipped to you.Don’t forget to buy this as a PERFECT GIFT for your family & friends.100% Money-Back Guarantee 120 days full refund or send a replacement guarantee and whit in 7*24 hours quick response if you have any concerns.

User questions & answers

Question:	Where can you buy additional blades
Answer:	at amazon
Question:	Where is it made
Answer:	It's made in China. ("On Japanese machines!")
Question:	Is this saw produced in Japan
Answer:	On the saw and package I received, there is no way to tell, at least not that I can see. I just checked the packaging thoroughly, and there is no indication on the packaging, or on the saw, of where it was actually made. The packaging has the statement "Saw Blades Produced by Japanese Machinery and Technology", but it doesn't say "in Japan" anywhere, or in any country.