12 best block plane

Product description

Caliastro No. 60-1/2 Adjustable Mouth Low Angle Block Plane. Length 6.1 Inches, Width 1-3/4 Inches. Includes 2 hardened and tempered blades which are 4.25 inches in long, 1.3 inches wide, and 1/8 or .125 inches thick. Cast as a single piece base and frog from iron to provide accuracy and durability. Blade honing is recommended to personal specifications.

• Fully adjustable mouth allows for coarse cuts or finishing work with easy and precise adjustment
• Ready-to-use hardened and tempered blade, though tuning to personal specifications is recommended. Do not test the sharpness of the pre-mounted blade with your finger, use a piece of paper instead
• Length 6.1 Inches, Width 1-3/4 Inches, Blade is bedded at 13.5 degrees
• 2 Blades - Length 4.25 Inches, Width 1.3 Inches, Thickness (1/8 Inches) or .125 Inches
• Single-piece base and frog cast from iron provides accuracy and durability

User questions & answers

Question:	Is this a model
Answer:	Mexico. I think the cutter is made in England though.
Question:	Why is delivery going to take so long? Even with Prime
Answer:	Yes the frog can be adjusted for and aft
Question:	How big is this planer
Answer:	The angle of the blade is fixed but the frog is adjustable, the depth of the blade is adjustable and the skew of the blade side to side is adjustable, slightly. It is easy to skew the blade when you lock it in as well. Normally, you want the blade as close to perfectly centered as possible. Paul Sellers actually recommends putting a slight convex on the iron's leading edge to prevent gouging at the sides when your iron is set deep.
Question:	Is this all cast iron, brass and steel, no Aluminum
Answer:	Bevel down. All standard angle planes are bevel down. Low angle planes, like the #62; are bevel up.

Product description

STANLEY is a leading global manufacturer of hand tools, power tools and related accessories, and a flagship brand of the wider Stanley Black & Decker Corporation. Ever since its foundation in 1843, STANLEY has been committed to providing professionals across the globe with products which are smart, tough, pioneering and up to the task. For over 170 years, STANLEY has been responsible for unlocking new levels of user performance through creating some of the most useful tools ever made including the Bailey Plane, the Surform shaper, the PowerLock tape rule, and most recently, the FatMax line of products. Today, the company continues to be an industry leader in hand tool innovation thanks to a continued focus on the excellence that is inherent in every product, employee and business.

From the Manufacturer

Both the 12-247 and 12-220 have machined sides. Cutter rests at a 21° angle, ideal for cross-grain planing. Cutter is fully adjustable for depth of cut and alignment. Gray, cast-iron base with precision-ground sides and bottom. Durable epoxy coating provides long-lasting protection. Finger-rest at front of plane adds comfort and control.

• Manually adjustable
• General purpose, ideal for 1-12-220 Makers, craft and all light duty jobs
• Cutter rests at a 21° angle, ideal for cross-grain planing
• Both the 12-247 and 12-220 have machined sides
• Cutter rests at a 21° angle, ideal for cross-grain planing
• Cutter is fully adjustable for depth of cut and alignment
• Gray, cast-iron base with precision-ground sides and bottom. Durable epoxy coating provides long-lasting protection
• Limited Lifetime Warranty

User questions & answers

Question:	Can I use this to shave the bottom of my wooden doors to shorten the height
Answer:	Yes. Make sure the door is stable before using a good plane. Be careful when nearing the outer edges of the door to avoid tear out. Avoid this by clamping a 2X4 or scrap piece of wood at least the same thickness as the door on both ends.
Question:	What do these (14.9 x 5 x 0.6 inches) measurements refer to
Answer:	Good question, because that's not the correct size of this plane. It's 9 3/4" long and 2 3/4" wide and 5" tall.
Question:	I cannot figure out how to put this together, are there any directions online
Answer:	Try this link http://tooltrip.com/tooltrip9/stanley/stan-bpl/benchplanes.pdf If it doesn't work, search for Stanley plane instructions. You have a 12-220 block plane. You will need to sharpen the blade before using. Many complain about this but it's no big deal - if you are going to use a plane, you better know how to sharpen the blades.
Question:	Does this have a chipbreaker
Answer:	No. Not like my larger planes. But, with the micro-adjust brass screw, you can take very fine bites so it doesn't matter. I own about 8 to 10 planes and this one works as well as any other. I love this little one for quick or small jobs. Well built and steady.

Product description

Are you a hobbyist or artisan that enjoys working with wood and in need of a Block Plane? Perhaps you have never used a carpenter’s block plane and wonder, how this tool can help you complete your project? Block planes are commonly used for cleaning up wood components by removing thin shavings, in addition to cutting end grains and doing touchup or finish work. These WORKPRO Block Planes are ideal for cleaning up wood ends and edges by removing thin shavings of wood, in order to make additional wood components fit together tighter, and within desired tolerances. When these low-angle block planes are set at the correct blade depth, they can help smooth rough areas of solid wood components, with greater precision in just a few simple passes. These cast iron block planes are easy to use and include a front wooden handle for improved control. They feature a single hardened and tempered steel blade set at a shallow angle, which allows the blade to slice through end grain with greater efficiency. Best results are achieved when the plane is held at an angle of up to 45 degrees when pulling or pushing across the edge of the wood. This allows the cutting edge to slice much easier through the wood fibers as they pass from one end of the cutting edge to the other. Sharp, dangerous wood corners can be easily removed with these compact planes, a process also known as chamfering, which leaves wood edges with safer, beveled edges. These planes are also frequently used for paring and butting end grains of stock material, for touchup and finish work, and for removing dry, hardened wood glue. Do not wait any longer. Order yours today, and save time and money while providing a smooth finish to your woodworking projects.

• Used by carpenters and woodworkers to smooth
• Features a front knob handle for extra control
• Hardened and tempered 1-5/8 in. wide cutter
• Constructed of a cast iron body for lasting strength and durability
• Machine polished to help resist rusting

User questions & answers

Question:	Who do you use to ship this (usps or a carrier like ups?) also is it shipped in a sturdy box so it doesn't get crushed
Answer:	The padded part of the cushion belt is 25 inches...the straps on each side are 68 inches long each with a total length of the belt and straps being 161 inches.
Question:	Do you build these yourself
Answer:	I can’t say for sure, but it’s not heavy duty, nylon w/ Velcro. Unfortunately Mom rarely uses it because she’s in & out of the bathroom, & I don’t use it to transport her to appts. Check the length & whether it can be secured to the recliner. Sorry couldn’t be more help.
Question:	If i order today, what day will the package be in the usps system
Answer:	I don’t think the one I ordered was that long. I was never able to use it effectively with my father.
Question:	Is there a rubber band with this
Answer:	Not easily, I sew so I could extend one of the straps. I think there are "extension" available. I was not comfortable with the security though - it was easy for my husband to "undo" (if that is an issue & it was for me). I finally used a extra large back brace (like from HomeDepot) to wrap around him and the chair! They have a wide velco secure area. (Put the large "back" in the front to support him and the velco on the back side of the chair...where he couldn't get to it. That held him up and was much more secure.

Product description

The PORTER-CABLE PC60THP 6 Amp Hand Planer features a heavy-duty 6 amp motor which provides smooth cutting in hard materials, with a max no load speed at 16,500 rpm for smooth material removal. This planer has dual side dust extraction that allows for flexibility to place the dust extraction on either side of the tool as needed to keep work area clean. The over mold depth knob offers 10 positive steps which allow for better planer control and multiple depth control settings, along with 3 chamfering grooves for options on edge chamfering. An 11.5" cast aluminum shoe provides added control and better finish quality and the 5/64" depth of cut removes excess material in less time. It also has .47" max rabbit depth which removes more material per pass. Includes: PC60THP Hand Planer, Carbide Cutting Blades, Wrench, Dust bag, Edge Guide, Kit Bag.

• Heavy-duty 6 amp motor
• Dual side dust extraction allows for extraction on either side of the tool
• Overmold depth knob with 10 positive steps
• 3 chamfering grooves allow for options for edge chamfering
• Heavy-duty 6 amp motor
• Dual side dust extraction allows for extraction on either side of the tool
• Overmold depth knob with 10 positive steps

User questions & answers

Question:	What is the difference (besides price) of the pc60thp and the pc60thpk
Answer:	The pc60thpk is a heavy duty contractor model. The pc60thp is a lighter duty for homeowners.
Question:	how wide is the bades
Answer:	Mine measures 3 1/4 inches.
Question:	How does this work with boards that are wider than 3 inches
Answer:	It does OK but I would practice with some scrap first. I had a 12 inch wide board and made several passes without a straight edge. I stated at a very low setting, 1/64, and made two passes to remove stain. I did have to go back and sand down some overlaping spots. Next time I would use a straight edge to keep the planer straight on each past. Hopes this helps.
Question:	Is this a single blade or double blade
Answer:	It is a double blade and a very nice tool.

Product description

Big Horn 6-1/4-inch Block plane is fully adjustable, low blade angle for planning end grain and difficult wood. Heavy cast-iron body is finely machined for precision work. To adjust the Cutter blade for thickness of shavings, just loosen the wheel and manually adjust the Cutter blade endwise as required. Moveable front piece adjusts throat opening for fine or coarse planning. Lever cap and adjusting mechanism assures solid, accurate blade alignment. High-carbon steel blade hones to a sharp, long-lasting edge.

• Features: 6-1/4" contractor grade block plane with a 1-3/8" cutter
• Fully adjustable cutter blade rests at 13.5 degrees | adjustable knob for angle setting
• Low blade angle for face grain & end grain | adjustable mouth knob for different types of woods
• Cutter blade is fully adjustable for depth of cut and alignment
• Adjustable knob for depth of cut blades adjustment

User questions & answers

Question:	Where is this made? in the usa
Answer:	This pad uses an arbor to adapt the pad to the machine. 3M 05710 5/8" Superbuff Adaptor Shaft $12.75
Question:	Robert Luckett, the listing mentions nothing about the size reaching 50ft when 'filled'. Does the hose expand more than twice it's size when filled
Answer:	you need the adaptor for double sided pads, it screws on to it. When you want you flip the pad over and start fresh, It has wool on both sides and in the end will do about twice as many sq ft as a single pad does . I do this for a living and only use double sided pads for marine industry lots of surface to cover
Question:	I received the item today and there are some water that leaks between the spray nozzle and the brass connector. Is it normal
Answer:	Current inventory on this product is 15 with more expected by 6/10, next week.

Product features

The Ultimate Garden Hose

Introducing the new high quality expandable garden hose by Ovareo! Unrivaled quality and performance will make watering your garden or washing your car an activity you love. Ovareo garden hoses combine practicality, functionality and durability into one perfect hose! Our hose is available in 4 different sizes, so there is a perfect garden hose for everyone. The best part? We stand behind our hose and your satisfaction is our priority, so don't hesitate to get your garden hose today.

Product description

For Surface finishing of boards and square timber etc.

• JAPANESE WOODEN PULL PLANE KANNA: Ideal Japanese type woodworking hand planer for surface finishing of wood. You can make smooth chamfers by polishing the wood with this handtool. Because it is used by pulling instead of pushing, it is easy to apply force evenly, and accurate and efficient straight carpentry work is possible. It can be used not only for professional carpenters but also for a home DIY woodworkers.
• EASY TO HANDLE MINI SIZE: A small handy size wood planer. Ideal for chamfering corner of the wood. Angled shave is possible. Because it can be operated with one hand, it is also useful for precision work. The portable size is convenient for carrying around.
• TOP QUALITY JAPANESE TOOL: Only Japanese high-grade materials are used. The plane blade is razor-sharp and durable, it is possible to restore the sharpness by sharpening the blade with a whetstone. Also, the wooden body is heavy duty and excellent wear resistance. All KAKURI brand products are manufactured in Japan and handcrafted by Japanese craftsmen.
• OFFICIAL ENGLISH INSTRUCTION: KAKURI Official English instruction is included. The length of the blade is adjustable by hitting with a hammer. Fine adjustment of the blade is necessary when using a Japanese plane.
• PRODUCT SPECIFICATIONS: Made in Japan / Body: Oak wood / Blade: Japanese high carbon steel / Size: 2.2×5.9×1.6 inches

User questions & answers

Question:	Was looking fir something to trim the edge of a door that sticks a bit and wondering if this would work
Answer:	It straps around the back of the chair like a weight belt. It doesn't attach to the chair but it seems s s good belt.
Question:	Do you have to keep tapping with a hammer between passes like the video shows
Answer:	Looks like vinyl so I would say yes on water proof
Question:	What are the true dimensions of the kanna? The Amazon listing has two different sizes listed. Thank you
Answer:	I'm not sure it would fit, unfortunately it still loosens on the bike I use.
Question:	Will this plane be suitable for working with hardwoods
Answer:	It measures ~5” from the bottom of the clamp to the high point on the cushion. But depending on how much you tilt the seat, that measurement will change.

Product features

Do you know about a “Japanese Pull Plane“?

Japanese plane finish surface of wood via pulling and thus are called “pull plane.” It requires less power, realizes exceedingly smooth and accurate scrape, and results that the finished surface is clean. And particularly this plane's blade is sharper because high quality carbon steel is used, enable comfortable wood working comparable plane of its size.

MADE IN JAPAN BY JAPANESE CRAFTSMEN

All KaKurI products are manufactured in Japan by Japanese master craftsmen. While many other makers in Japan have shifted to creating products outside of Japan, we continues to plan, create trial products, and carry out product tests in our factory and are able to incorporate the fresh and new opinions of craftsmen. This allows us to ensure our high quality in our products.

For finishing the surface of wood!

This tool is possible to finish the surface of wood smooth.

Pull it forward with both hands.

Fine adjustment of the plane blade is required to use the plane appropriately.

Please refer included English instructions.

Handy size. Ideal for wood work!

It is an easy-to-hold mini plane that you can work with one hand.

Portable size enable you to work smart and comfortable.

• Size: 1.6 × 5.9 ×2.1 inches
• Weight: 9.4 oz

Product description

6-Inch Block Plane is fully adjustable, Low blade angle for face grain and end grain, Bronze and cast iron construction, Plane blade measures 1-3/8-Inch wide, Adjustable throat opening.

• 6-Inch Block Plane is fully adjustable
• Low blade angle for face grain and end grain
• Bronze and cast iron construction
• Plane blade measures 1-3/8-Inch wide
• Adjustable throat opening

User questions & answers

Question:	Where is it made
Answer:	No
Question:	Is the replacement blade available in the market? If not is there any compatible blade
Answer:	2 per pack
Question:	are the adjustment rough or fine? how out flat is the sole
Answer:	This pad is 8" I do not believe that 3M is making 6" Velcro pads at this time. For rotary buffers, there are 6" double-sided polishing pads (3M 33285) that may be used with a Quick Connect adapter (3M 5752, For single-sided Velcro pads, I would check out other manufacturers including Meguiar's, Rupes, SM Arnold, and Buff & Shine.
Question:	Block Plane Blades11-5/8" 5/8"Slot
Answer:	Hi Meagan. The pad you have in question is designed for use with a cutting compound. Polishes and waxes should be applied using different pads. We'd like the opportunity to discuss it further and gather additional information. Please connect with our team at 877.666.2277 M-F 8am-4:30pm CT. Thank you for your question and we look forward to your call.

Product description

This low angle block plane is the perfect tool for smaller smoothing and trimming jobs. The low angle design excels at slicing through end grain. This block plane is ideal for the cabinet maker and discerning woodworker. The body is made from nearly indestructible stress-relieved ductile cast iron. The sole and sides are precision lapped to within 0.001” over the entire length of the sole. Overall length is 7 inches long, 2-1/8 inches wide. Weight is 1.8 pounds. The stainless steel knuckle joint cap snaps in place to secure the blade and provides a comfortable palm rest for extended use. The blade is adjusted forward/back via the solid brass rear adjustment knob. The 1/8 inch thick by 1-5/8 inch wide tool steel iron is hardened and tempered to 55-60 Rockwell C. Blade is ground at 25 degrees. The mouth opening can be easily adjusted for both fine and coarse work. This plane has good mass to reduce chatter and can easily be used one-handed. Bed angle is 12 degrees. "

• Body made from stress-relieved ductile cast iron with precision lapped sides and sole
• Stainless steel knuckle joint cap
• 1/8 inch thick tool steel blade, hardened and tempered to 55-60 HRC. Sharpened to 25 degrees.
• Sole precision ground to within 0.001” over the entire length
• Overall length 7”, 1-5/8" wide, 1.8 pounds

User questions & answers

Question:	In what countru is this made
Answer:	3m should warranty it against workmanship defects but I have used these for years and have only had an issue once.
Question:	Where do I buy a replacement blade
Answer:	Dewalt makes a good one. Make sure the speed adjusts down to 1000 rpm or less
Question:	How many pieces do this thing have? I think something it’s missing
Answer:	Hi Scott. This product is just a pad driver and will not burn the serface wile buffing it is the pad that will burn. It is important to select the correct pad for the job. I use a standard sheepskins pad with rounded edges for buffing compound but for a finishing product like Faness-it for clearcoat I use a foam egg creat pad. Good luck, I'm sure you will do fine. Stay away from edges and don't get the serface to hot :-)
Question:	Will this work to shave some wood from a door the swells and sticks shut
Answer:	Unfortunately Im out of town and can’t answer because I ordered2 wool pads,,, 1 worked with my quick release and #2 didn’t. Had to reorder to get the one that did. So,, don’t know which one you’re referring to. Call Amazon customer service,, that’s what Zi did to finally get the right product after receiving the wrong one
Question:	Anybody care to explain how do I adjust this? The instructions are not helpul, and it looks like I have to do it with a mallet. Not very precise
Answer:	Not sure what you mean by "step 3" but if it is your final step in polishing, you want to choose the 3M wool polishing bonnet/pad.

Product description

7", adjustable block plane, cast iron body is accurately machined & polished, hardened & tempered 1-5/8" width Cutter, low angle blade for precision work, adjustable for thickness of cut, longitudinal & lateral adjustments, hardwood handle.

From the Manufacturer

Block Plane, popular for everyday type of work, with a steel screw to adjust the 1-5/8-inch cutter for thickness of cut and a polished 7-inch base.

• Popular type plane for everyday work
• Steel screw makes the 1-5/8" cutter adjustable for thickness of cut
• 7" base is polished
• Buck Bros - a Great Neck Saw brand

User questions & answers

Question:	does this plane have brass or bronze hardware or is that just the way it appears in the photo
Answer:	Yes
Question:	Does it have an adjustable mouth
Answer:	the petite brush is about 1 1/2 to 2 inches in diameter
Question:	where can i get parts for the block plane
Answer:	NO! First of all you'd need a thread adapter and second, your speed would be way too high possibly causing the pad to "explode" Don't do it for safety sake.

Product description

12-920 Cutting Wth: 1 5/8 (part# 12-920) This item features: -Grey cast iron base with side and bottom precision ground. -Durable epoxy coating for long-lasting protection. -Hardened, tempered, and precision ground tool steel cutter for cutting edge durability. -Exact depth and lateral cutter adjustment for precise shaving. -Quick release cam-lock for easy blade removal. -Machined finger grips in sides provide for easy single-handed use. -Fully adjustable cutter resting at 21 degrees. -Grey, cast iron base with precision ground sides and bottom. -Low angle cutter rests at 13-1/2 angle. -Solid brass depth adjustment knob. -Length: 6 1/4 in. -Price is for 1 Each. Amazon.com This Stanley 6 1/4-inch Contractor Grade Block Plane is ideal for planing end grain and plastic materials. Designed with a gray, cast-iron base that has precision-ground sides and bottom, this plane will work quickly and efficiently to smooth and remove debris from any work piece on your bench. Versatile, durable, and designed to accomplish tasks efficiently. Works efficiently and easily with your bench-top projects. View larger. The block plane has a fully adjustable cutter that rests at 21-degrees and adjusts to 13 1/2-degrees, for less vibration, more control, and a finer finish. Its hardened, tempered steel construction gives you a precision-ground cutter edge that's durable and reliable, and a cutter mechanism that moves with your needs for complete manageability. This block plane boasts a quick-release cam lock that makes iron removal easy, and there are finger grips machined into the sides, making single-handed use unbelievably easy. It's even topped off with a durable epoxy coating so you can enjoy years of heavy-duty use. This block plane is 6 1/4-inches long with a 1 5/8-inch cutter.

This Stanley 6 1/4-inch Contractor Grade Block Plane is ideal for planing end grain and plastic materials. Designed with a gray, cast-iron base that has precision-ground sides and bottom, this plane will work quickly and efficiently to smooth and remove debris from any work piece on your bench.

Versatile, durable, and designed to accomplish tasks efficiently.

Works efficiently and easily with your bench-top projects. View larger.

The block plane has a fully adjustable cutter that rests at 21-degrees and adjusts to 13 1/2-degrees, for less vibration, more control, and a finer finish. Its hardened, tempered steel construction gives you a precision-ground cutter edge that's durable and reliable, and a cutter mechanism that moves with your needs for complete manageability. This block plane boasts a quick-release cam lock that makes iron removal easy, and there are finger grips machined into the sides, making single-handed use unbelievably easy. It's even topped off with a durable epoxy coating so you can enjoy years of heavy-duty use. This block plane is 6 1/4-inches long with a 1 5/8-inch cutter.

• 6-1/4-inch contractor grade block plane with a 1-5/8-inch cutter
• Fully adjustable cutter rests at 21 degrees
• Gray, cast-iron base with precision-ground sides and bottom; durable epoxy coating provides long-lasting protection
• Quick-release cam-lock makes iron removal easy
• 6-1/4 inches long; 1-5/8-inch cutter; limited lifetime warranty

User questions & answers

Question:	Which are the differences vs 12-220 model
Answer:	Yes. In QC terms, I can't speak for every plane that they made in this series, but mine came "good to go" right out of the box. The sole was flat to a few mills. The sides were square to the sole. The back of the blade was flat and polished and the bevel only required a light honing to further polish it. I can not speak to the compatibility with Veritas, Lie-Nielson or Hock replacement blades. However, I would be surprised if there is an issue. I should note that I managed to nick the blade planing some 10-20 year old cherry. I managed to find a knot from hell. The Veritas powder-metalurgy blade might have stood up to that, but I can't say that for sure. I hope that helps.
Question:	Can this be used to make chamfer edges on oak? Was thinking of 15 degree edge for a nicer look
Answer:	You can buy spare premium blades for almost any hand plane from Hock tools. Search for Hock plane blades and you will find them. My woodworking teacher recommends the "01" versions because they are easier to sharpen - he doesn't think the more expensive 02 Hock blades are really worth it. But since 85% of the function of any hand plane comes from the blade, adding a nice blade to even a junky old plane can get you something that works very well.
Question:	Is this a good block plane for a homeowner? I need something for the random project that comes up. Any difference in the low profile one
Answer:	CHN
Question:	I have several 1"x6" pine that I want to join together for a table top. Would this be the right tool to square the 1" edges if I needed to
Answer:	Sure I will try to answer questions

Product features

Stanley 12-920 Features

• Ideal for planing end grain and plastic materials
• 12-920 block plane has a fully adjustable cutter resting at 21°
• 13-1/2° low angle cutter on the 12-960 block plane keeps vibration to a minimum, creating a fine finish
• Gray, cast-iron base with precision-ground sides and bottom
• Finger grips machined into sides make single-handed use easy
• Hardened, tempered steel gives precision-ground cutter edge durability
• Cutter adjusts for depth and alignment, offering precise control
• Durable epoxy coating for long-lasting protection
• Quick-release cam-lock makes iron removal easy

Product description

Are you a hobbyist or artisan that enjoys working with wood and in need of a Block Plane? Perhaps you have never used a carpenter’s block plane and wonder, how this tool can help you complete your project? Block planes are commonly used for cleaning up wood components by removing thin shavings, in addition to cutting end grains and doing touchup or finish work. These WORKPRO Block Planes are ideal for cleaning up wood ends and edges by removing thin shavings of wood, in order to make additional wood components fit together tighter, and within desired tolerances. When set at the correct blade depth, these block planes help smooth rough areas of solid wood components, with just a few simple passes, they are easy to use and fit comfortably in one hand. These planes are constructed of a cast iron body and include a front handle for best control. They feature a single steel blade set at a shallow angle, which allows the blade to slice through end grain with greater efficiency. Best results are achieved when the plane is held at an angle of up to 45 degrees when pulling or pushing across the edge of the wood. This allows the cutting edge to slice much easier through the wood fibers as they pass from one end of the cutting edge to the other. Sharp, dangerous wood corners can be easily removed with these compact planes, a process also known as chamfering, which leaves wood edges with safer, beveled edges. These planes are also frequently used for paring and butting end grains of stock material, for touchup and finish work, and for removing dry, hardened wood glue. Do not wait any longer. Order yours today, and save time and money while providing a smooth finish to your woodworking projects.

• Used by carpenters and woodworkers to smooth
• Features a front knob handle for extra control
• Hardened and tempered 1-9/16 in. wide cutter
• Constructed of a cast iron body for lasting strength and durability
• Machine polished to help resist rusting

Product description

[Application] Scraping work of wood surface. [Features, Functions] It is easy to use small size planes. [Material] Blade: Carbon tool steel. [Precautions] Since it is a cutlery, please handle with care. Do not use if there is a crack in Plane body, cutting edge. If there is a foreign object such as a nail in the material, please use it after removing it. Senkichi is one of eight original brands of Fujiwara Sangyo Co., Ltd., specialized in cutting tool for carpentry and gardening. "Providing products to all tool distribution channels in Japan." Established in April 17, 1944, the company business is carried out from the headquarters and seven branches and sales offices. [Products] Carpenterfs tools/Work tools/Air tools/Tip tools/ Work support/Gardening tools/Gardening equipment/Gardening supplies. [Product Categories] A wide range of products, from carpentry and power tools, to hand and gardening tools. As a trading firm focused on planning and development, we offer a variety of DIY tools, primarily power tools, hand tools, and gardening tools. Our product line includes approximately 100,000 models. This vast array of products allows us to satisfy the needs of our clients. [Carpenterfs tools] Basic DIY tools for cutting, grinding, hammering, polishing, and measuring. [Work tools] Hand tools for any work situation and application. [Air tools] Power tools that efficiently perform high-precision work. [Tip tools] Tool bits with high precision that can be safely used with any material [Work support] Product support for safe, secure, and comfortable work performance. [Gardening] Gardening equipment for hobby gardeners and professionals. [Gardening equipment] Wide range of products for pruning, cutting, planting, weeding, cultivating, and storing. [Gardening supplies] Gardening tools for various gardening applications.

• Total length: 150mm
• Blade width: 40mm
• Size: W54 x H150 x D38mm
• Weight: 140g
• great for grinding wood surface

User questions & answers

Question:	How can i sharpen the blade
Answer:	Yes they are. I haven't seen one bristle fall off or get stuck in my hair when using it or have seen any bristles on the floor.
Question:	What is the size of this plane? It is listed as 40 mm which is 1.57". Is this correct
Answer:	These are used just like any brush that is used along with a blow dryer. Just like in the hair salon. They don't need batteries.
Question:	How do you adjust and slow the blade? Like the metallic pin that is seen in many Japanese brushes. I dont see a piece for this in the picture
Answer:	Thank for your interest in Olivia Garden. This particular brush you are viewing is the Olivia Garden Ceramic and Ion Turbo Vent Combo in the 2 1/2" barrel (CITV-COMD). If you are looking for the Olivia Garden Speed XL (CIXL-55) that has a 2 1/8" barrel that would be similar in barrel size but offers different benefits for your hair including faster drying time, as it is made with a Ceramic coated barrel that heats up faster & retains heat longer. Hope this answers your question. Happy styling, Olivia Garden
Question:	I need to plane the top edge of a door that is getting stuck. Don’t want to remove it from the hinges first. Will this be able to handle that task
Answer:	I don't have a hard time using mine, as long as my hair is not sopping wet, and as long as my hair is detangled prior to use. But I don't have curly or thick hair, mine is fine and wavy. Did you get the right size for your hair length?