12 best hammer handles

Hammer handles are a critical component of hammers, which are commonly used hand tools in construction, carpentry, and various other applications. The handle of a hammer plays a crucial role in providing grip, control, and shock absorption. Here are some key points about hammer handles:

Materials: Hammer handles are typically made from various materials, including wood, fiberglass, steel, and composite materials. The choice of material depends on the type of hammer and its intended use.
Wooden Handles: Wooden handles, often made from hickory or ash, are traditional and known for their durability and shock-absorbing properties. They are commonly used for claw hammers and mallets.
Fiberglass Handles: Fiberglass handles are lightweight and offer excellent strength and durability. They are often used for hammers that require extra strength, such as sledgehammers.
Steel Handles: Steel handles provide exceptional strength and durability and are commonly found on specialty hammers like engineer's hammers.
Composite Handles: Composite handles are made from a combination of materials, such as fiberglass and rubber, to provide a comfortable grip and reduce vibration. They are commonly used in anti-vibration hammers.
Handle Length: The length of the hammer handle can vary depending on the type of hammer and its intended use. Longer handles are often used for more extended reach and leverage, while shorter handles offer better control and maneuverability.
Grip: Many hammer handles have textured or ergonomic grips to enhance comfort and control during use. These grips can help reduce hand fatigue and improve accuracy.
Shock Absorption: Wooden handles are known for their natural shock-absorbing properties, which help reduce the impact on the user's hand and arm when striking a surface.Fiberglass and composite handles may also include shock-absorbing features.
Replacement: Over time, hammer handles can wear out or break due to heavy use. It's essential to replace damaged handles promptly to ensure the safety and effectiveness of the tool.
Maintenance: Regular maintenance of hammer handles involves inspecting them for cracks, splinters, or signs of wear. Applying a coat of protective finish to wooden handles can help extend their lifespan.
Safety: When using hammers, it's essential to wear appropriate personal protective equipment, including eye protection and gloves, to prevent injury from flying debris or mishandling.

In summary, hammer handles are a crucial component of hammers, providing users with the grip, control, and shock absorption needed for various tasks. The choice of handle material and length depends on the type of hammer and its intended use, and proper maintenance is essential to ensure the longevity and safety of the tool.

Below you can find our editor's choice of the best hammer handles on the market

Seymour 403-19 12-Inch Ball Peen Hammer Handle

Seymour

Based on 193 reviews Check latest price

Product description

Seymour link handles 403-19 12-inch ball peen hammer handle

Shock-absorbing American Hickory with Clear lacquer and Fire finish
For 8 to 12-ounce hammers
3/4-Inch by 7/16-Inch
12-Inch length

User questions & answers

Question:	The eye of my hammer head is approximately 1/2' wide by 3/4" in long. Will this handle fit my hammer
Answer:	I am pretty certain that it does. If not, they are readily available from any hardware store.
Question:	dose it come with any wedges
Answer:	It's oval and you might have to file the wood some to get it to seat correctly and the place the wedge into the split. It me about 10 to 15 mins to get the correct contour and seating. Works great with hammer head.
Question:	Its the head straight or round. My hammers hole is oval not square. Would this work
Answer:	Onley a metal wedge.
Question:	Does it come with both a wood and metal wedge
Answer:	Thanks for your interest! No, this product is designed to be used as a golf divot tool. We apologize for any inconvenience.

Seymour LK-480-19 10-1/2-Inch Sledge Hammer Handle, Oval Eye

Seymour

Based on 229 reviews Check latest price

Product description

For warwood 3 & 4 lb. Hammers; for wooding verona 2, 3 & 4 lb. Hammers; for true Temper 2, 3 & 4 lb. Hammers; for Warren 2, 3 & 4 lb. Hammers; for Council hammers nos.2272-101/2 or 2272-12; & for Stanley 2, 3 & 4 lb. Hammers. Fk - Forest K ing hickory: fire finished, buffed, sealed with clear waterproof sealer. Good weight, White, tough, straight grain. Able to withstand hard service. B - beauty: good quality, white hickory. Slight blemishes of growth permitted In areas not affect ting service. Tips of red wood permitted.

Shock-absorbing American hickory with clear lacquer and fire finish
For 2 to 4-pound hammers
Oval eye 1-inch by 3/4-inch
10-1/2-inch length

User questions & answers

Question:	Can I use this on a 3 pound craftsman
Answer:	I think this one is a little short for that. I have about a 17" handle for my 6lb. Feels right for me. Any shorter and it would be tough to swing/use.
Question:	Would this handle be good for a 6lb sledge
Answer:	This handle really is designed to work with a small (2-4#) sledge hammer, otherwise known as a "drill hammer". I suggest you keep looking for a replacement handle appropriate for your small hammer, or look for a total replacement at a garage sale.
Question:	Can I use it for my 7 oz hammer? The length of my handle is 10 inches so I was wondering if this would work
Answer:	Yes.
Question:	Does it come with a wedge
Answer:	My hammer head had an opening of about 1/2 by 3/4 inch like yours. I used a file or rasp to take just a bit of wood off the handle to make it fit through the hole, then hammered the cleat into the end to lock the handle onto the hammer head. I rubbed on some Old English furniture & scratch remover for color and sprayed on a coat of varnish. Voila, better than new!

Stiletto 18-Inch Curved Replacement Handle

Stiletto

Based on 387 reviews Check latest price

Product description

Includes 18-in Curved Hickory Replacement Handle (12, 14, 19, 21 oz.) - STLHDL-C, Round Steel Wedges, Poplar Wood Wedge, Replacement Instructions.

Made of good quality products
Select propellants that deliver consistent accuracy and performance
Product is manufactured in United States

User questions & answers

Question:	Is it only 16 ounces
Answer:	Prime. 2 days
Question:	Does this really take 2 months to get here
Answer:	Yes..the Stilletto hammer head is the same.
Question:	Can this be use to replace a fiberglass handled stiletto
Answer:	The size is approx 1 3/4" x 5/8" And it is a triangular shaped oval with the smaller part to the back. I love this handle it just has the right feel to get a good swing. All hammers area little different this handle is made for the stilleto hammer but it also fit my California framing hammer with a little sanding. I used my die grinder with a roloc sanding disc to fit it just right. I used a candle to blacken the inside of the hammer head to see where I needed to sand and after a couple of minutes I had a perfect fit.
Question:	whht is the size that goes into the eye of the axe head
Answer:	Not sure. What is a "3 pound craftsman"?

Stiletto STLHDL-C16 16-Inch Curved Replaceable Handle with wedges (Fits 12,14,19 & 21 Ounce) by Stiletto

Stiletto Hammers

Based on 28 reviews Check latest price

Product description

The item is Stiletto STLHDL-C16 16-Inch Curved Replaceable Handle with wedges (Fits 12,14,19 & 21 Ounce) . Used for Handtools & Tool Organizers, Hammers. The product is manufactured in China. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

The item is Stiletto STLHDL-C16 16-Inch Curved Replaceable Handle with wedges (Fits 12,14,19 & 21 Ounce)
Used for Handtools & Tool Organizers, Hammers
The product is manufactured in China

Seymour 423-19 16-Inch Oval Eye Engineer's Or Blacksmith Hammer Handle

Seymour

Based on 183 reviews Check latest price

Product description

Seymour link handles 423-19 16-inch oval eye engineer's or blacksmith hammer handle

Shock-absorbing American Hickory with Clear lacquer and Fire finish
For 3 to 4-Pound hammers
Oval eye
1-Inch by 3/4-Inch
16-Inch length

User questions & answers

Question:	Does it include a fastening wedge
Answer:	said USA hickory
Question:	Is it made in the USA
Answer:	The Seymour 423-19 handle I received won't. Unfortunately, I didn't read the description thoroughly before I ordered it, but rather I relied on these answers instead. Big mistake! The description states that it has a 1-inch by 3/4 inch oval eye. That's exactly describes the handle that I received! I'm really curious how it's shaped, what the "usual fitting and wedging steps" apply and what "minor shaping" will make this handle fit a hammer head with a 1 1/4" x 1" oval hole. The answer to this question is NO IT WON'T!
Question:	I have a 4 lb sledge hammer with an oval hole 1 1/4" x 1". Will this handle work for me
Answer:	Yes mine did come with a wedge...
Question:	Were these supposed to come with a wedge? Mine didn't
Answer:	This is just the handle, the hammer head is not included. The hammer head it fits is a 14 oz, Stlletto tool Co., titanium hammer head, If you do not have this specific hammer head, you may wish to select a more universal handle.

Link Handles 65406 Octagon Body Claw Handle for 16 oz. Hammers, 14" Length, Wax Finish, Grade A

Link Handles

Based on 101 reviews Check latest price

Product description

Link Handles 65406 Octagon Body Claw Handle for 16 oz. Hammers, 14" Length, Wax Finish, Grade A

For 16 oz. hammers, Eye 1-1/16" x 9/16"
Best-quality American hickory
Wax finish
Grade a and industrial use
Length is 14"

User questions & answers

Question:	Is this for an oval eye? Or tear drop? Or
Answer:	Yes, it comes with a steel wedge and a couple of wooden wedges.
Question:	Does this come with a wedge to set the handle
Answer:	Yes, metal and wood

Link Handles 65751 Oval Eye Engineer's/Blacksmith's Handle for 3.5 lb. and Heavier Hammers, 16" Length, Clear Lacquer, Fire Finish

Link Handles

Based on 104 reviews Check latest price

Product description

16IN BLACKSMITH HAMMER HDL

For 3. 5 lbs. and heavier hammers, Eye 1-1/4" x 1"
Better-quality American hickory
Fire finish
Contractor grade
Length is 16"

User questions & answers

Question:	does it come with wood wedge
Answer:	Just measured it as one and a quarter inch by three quarter installed. I had to rasp it to get it in. Then used the steel wedge that came with for a rock solid fit. So originally it was probably a bit larger than now.
Question:	What is the oval dimension at the end of the handle
Answer:	its a oval

Link Hammer Handle 15 " Fiberglass Boxed

Based on 43 reviews Check latest price

Product description

Highlights: Heavy duty fiberglass core with high visibility yellow molded clad exterior Includes epoxy kit Handle Length: 15" With epoxy and fiberglass material Replacement handle for Catalog ID: 41017454 Boxed

Heavy duty fiberglass core with high visibility yellow molded clad exterior
Includes epoxy kit
Handle Length: 15"
With epoxy and fiberglass material
Replacement handle for Catalog ID: 41017454

User questions & answers

Question:	Will work for a 1” round eye
Answer:	the epoxy will take up any gaps once you get it close 1 3/4x3/4
Question:	What are the dimensions of the part that goes inside the head
Answer:	Mine did include a wedge.

Vaughan & Bushnell 3800 Dalluge Straight Replacement Handle for 7180 Model

Dalluge Tools

Based on 159 reviews Check latest price

Product description

Dalluge decking and framing hammers are in a class by themselves. Designed by a professional carpenter for professional carpenters, Dalluge hits the word "balance" right on the nose, with head-to-handle weight ratio so precise, you'll swear you're swinging a much light hammer. The result is surer, deeper, more powerful nail driving with less strain on the arm and shoulder.

Country Of Origin: United States
Model Number: 3800
Item Package Dimension: 19.75" L x 7.25" W x 1.78" H
Item Package Weight: 0.8 lb

User questions & answers

Question:	Is this a 15" handle? Or a 17"? Another listing with same part # said it's a
Answer:	This handle specifically fits the 3800 Delluge 7180 Model.
Question:	Will it fit my husbands 20oz Douglas head
Answer:	yes, fit great on mine
Question:	I have a douglas dfr23. does this handle fit well on it
Answer:	Yes. It comes with new handle and bolts.
Question:	Do the two bolts come with the Handle
Answer:	no

Handle Wedges 36 Pack Large

Based on 167 reviews Check latest price

Product description

36 steel wedges for hammers, axes, mauls, and sledge hammers. 12 pieces each size T-80, T-90, and T-100 "Sure-Hold" flat wedges with our patented barbed face design. Wedges are designed, manufactured, and sold by TACO Fasteners Inc. of Plainville, Connecticut.

3 sizes perfect for all sizes of tool eyes
Barbed face design prevents wedges from working out of tool handles
Designed and manufactured by our family business in Plainville, Connecicut USA

User questions & answers

Question:	What is the degree of angle
Answer:	The T-80 wedge is approximately 1/2" wide and 1 1/8" long. Thank you for your interest in our metal wedges. With kind regards: TACO Fasteners.
Question:	how wide are these wedges? (how wide is a t-80 wedge
Answer:	Mine came 15-3/4" overall

Stiletto STLHDL-S16 16-Inch Straight Replaceable Handle with wedges (Fits 12,14,19 & 21 Ounce)

Stiletto

Based on 67 reviews Check latest price

Product description

The item is Stiletto STLHDL-S16 16-Inch Straight Replaceable Handle with wedges (Fits 12,14,19 & 21 Ounce) . Used for Handtools & Tool Organizers, Hammers. The product is manufactured in China.

From the Manufacturer

16" Straight Hickory replacement handle ( Fits 12,14,19 & 21 oz )

The item is Stiletto STLHDL-S16 16-Inch Straight Replaceable Handle with wedges (Fits 12,14,19 & 21 Ounce)
Used for Handtools & Tool Organizers, Hammers
The product is manufactured in China