12 best ry tube cutters

Product description

100% brand new and high quality

Features:

Essential cutting tool for your home handy man, plumbers, electricians, and vehicle mechanics.

Strong, lightweight slide and wheel housing, and large knurled feed screw knob give easy control of cutting pressure for clean cuts.

Can cut copper, brass, aluminium, and vinyl pipes. Used in all sorts of Plumbing Work.

Specifically designed for use in restricted spaces on small diameter, hard and soft copper, aluminum, brass and plastic tubing.

The type of cutter used depends on the material, diameter, and thickness of the pipe or tube. Pipe and tube cutters are frequently used to create custom piping systems both for residential and commercial buildings, industrial plumbing or processing lines for fluid transfer systems, waste water treatment, fluid or gas handling, and for heating and cooling systems.

Specification:

Cutting capacity: 3-22 mm(1/8" - 7/8")

Material: Cast steel

Dimensions: 57x32mm/2.24x1.26inch

Color: Red

Quantity: 1 Pc

Note: 1.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.

2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you

Package includes:

1 x Mini Tube Cutter

• Essential cutting tool for your home handy man, plumbers, electricians, and vehicle mechanics.
• Strong, lightweight slide and wheel housing, and large knurled feed screw knob give easy control of cutting pressure for clean cuts.
• Can cut copper, brass, aluminium, and vinyl pipes. Used in all sorts of Plumbing Work.
• Specifically designed for use in restricted spaces on small diameter, hard and soft copper, aluminum, brass and plastic tubing.
• The type of cutter used depends on the material, diameter, and thickness of the pipe or tube. Pipe and tube cutters are frequently used to create custom piping systems both for residential and commercial buildings, industrial plumbing or processing lines for fluid transfer systems, waste water treatment, fluid or gas handling, and for heating and cooling systems.

• Makes STRAIGHT CLEAN BURR-FREE Cuts
• Cuts PEX Pipes from 1/8"-1"
• Spring loaded handle for quick opening/fast cutting
• DO NOT use to cut metallic pipes or cable wire
• Perfect for the DIY home-owner or the professional looking for the perfect way to get started with PEX plumbing

User questions & answers

Question:	can this be used on 1/2 poly tubing
Answer:	It cuts 1/2” PEX like butter so should have no problem cutting poly .
Question:	What is the differenct between this and a pvc pipe cutter? Looks that same
Answer:	This cutter is mainly designed for cutting Pex Pipes. Some feedback from our customers say that it cannot work with PVC pipes, some say it can work with PVC pipes. You can have a try.
Question:	why can't i get a replacement blade
Answer:	Excellent tool, excellent design, great price not worth replacing only a blade when the tool is under $8
Question:	It says made of steel! is it steel or cast aluminum/pot metal
Answer:	The handle is aluminum alloy and the blade is 70A steel.

Product features

Product description

A handy tool for working in tight and cramped spaces, the RIDGID 40617 Close Quarters Tubing Cutter is a must have for any plumber's toolbox. This tube cutter is specially designed for use in restricted spaces on small diameter tubing. Rollers feature grooves for close-to-flare cuts. Constructed for durability and ease of use, it has strong yet lightweight slide and wheel housing and a large knurled feed screw knob that produces clean cuts through easy control of cutting pressure.

The metal tube cutter includes a spare cutter wheel in the knob for maximum uptime.

This RIDGID tubing cutter has a 1/4-inch to 1-1/8-inch cutting capacity and effectively cuts hard and soft copper, aluminum, brass and plastic tubing.

RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.

From the Manufacturer

Since 1923, Ridgid has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the Ridgid brand is engineered to the same high standards of quality, strength and endurance as was that first heavy-duty pipe wrench more than 80 years ago. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. The Ridgid 40617 is a tubing cutting with a capacity of 1/2-Inch to 2-Inch and is specifically designed for use in restricted spaces on small diameter, hard and soft copper, aluminum, brass and plastic tubing; rollers include grooves for close-to-flare cuts. It has a strong, lightweight slide and wheel housing, large knurled feed screw knob gives easy control of cutting pressure for clean cuts. This cutter includes a spare cutter wheel in the knob

• Designed for use in restricted spaces on small diameter hard and soft copper, aluminum, brass and plastic tubing
• Strong, lightweight slide and wheel housing and large knurled feed screw knob ensure easy control of cutting pressure for clean cuts
• Rollers include grooves for close-to-flare cuts
• Tubing cutter has a 1/4-inch to 1-1/8-inch (6 mm to 28 mm) cutting capacity
• Includes spare cutter wheel in knob

User questions & answers

Question:	Will this work on fiber glass arrows
Answer:	The tig torch will have a separate outside gas hose to use while the MIG is all internal
Question:	Can this cut most pipes
Answer:	3-year warranty
Question:	I'm digging up a water main that's copper and is thicker than hvac copper. Will this cut it nice and clean? It's
Answer:	Yes this machine can run with 7018 electrodes.
Question:	Can this cut 1" brass pipe? The Outside diameter of 1" brass pipe is 1.32". Thanks
Answer:	Hello, Thank you for your message. The welder that you are referring to can weld up to 3/8” thick steel. Regards,

Product features

Achieve Clean Cuts in Tight and Cramped Spaces

An essential tool for working in tight and cramped spaces, the RIDGID 101 Close Quarters Tubing Cutter is a handy tool for any plumber's toolbox. With tough cutting jobs in mind, this metal tube cutter is specially designed for use in restricted spaces on small diameter tubing. Constructed for durability and ease of use, the tube cutter has strong yet lightweight slide-and-wheel housing and a large knurled feed screw knob that produces clean cuts through easy control of cutting pressure.

Ideal for Restricted Spaces

RIDGID Close Quarter Tubing Cutters are specifically designed for use in tight and cramped spaces on small diameter tubing.

Durable and Easy-Use Design

Tube cutter features a strong yet lightweight slide­-and-wheel housing and a large knurled feed screw knob that produces clean cuts through easy control of cutting pressure.

Grooved Rollers

For added versatility, the rollers on this tubing cutter feature grooves that allow for close-to-flare cuts.

Works with a Variety of Materials

The RIDGID 101 tubing cutter has a 1/4-inch to 1-1/8-inch cutting capacity and is suitable for use with hard and soft copper, aluminum, brass and plastic.

Handy Spare Wheel

The 101 metal tube cutter works with the RIDGID E3469 Cutter Wheel; tube cutter includes a convenient spare cutter wheel in the knob for maximum uptime.

Full Lifetime Warranty

RIDGID tools are built to last and come standard with the best warranty in the industry. Our reputation for superior quality and durability allows us to stand behind our tools with the RIDGID Full Lifetime Warranty against defects in workmanship and material. Should your tool ever malfunction from defects in workmanship or materials, we will repair or replace the tool free of charge.

Product description

Specifically designed for use in restricted spaces on small diameter tubing, the RIDGID Close Quarters Tubing Cutter makes tight cutting jobs easier. Built for durability and ease of use, the metal tube cutter features a strong, lightweight slide and wheel housing and large knurled feed screw knob that produce clean cuts by providing easy control of cutting pressure.

This copper tubing cutter has an 1/8-inch to 5/8-inch cutting capacity and effectively cuts hard and soft copper, aluminum, brass and plastic tubing.

RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.

From the Manufacturer

Since 1923, ridgid has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the ridgid brand is engineered to the same high standards of quality, strength and endurance as was that first heavy-duty pipe wrench more than 80 years ago. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. The ridgid 32975 is a close quarters tubing cutter with a capacity of 1/8-Inch to 5/8-Inch. This cutter is specifically designed for use in restricted spaces on small diameter, hard and soft copper, aluminum, brass and plastic tubing. The rollers include grooves for close-to-flare cuts. This cutter features a strong, lightweight slide and wheel housing and has a large knurled feed screw knob that gives easy control of cutting pressure for clean cuts

• Cuts hard and soft copper, aluminum, brass and plastic tubing
• Specifically designed for use in restricted spaces on small diameter tubing
• Strong, lightweight slide and wheel housing and large knurled feed screw knob provide easy control of cutting pressure for clean cuts
• Tubing cutter has a 1/8-inch to 5/8-inch (3 mm to 16 mm) cutting capacity
• RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool

User questions & answers

Question:	Will this score glass tubing
Answer:	It didn’t fit my Lincoln pro mig 180 .
Question:	Canyou cut rigid acrlic tubing with this
Answer:	Yes
Question:	how do you turn the cutter wheel
Answer:	Overall Dimensions: 10.75” wide X 17” long X 15.75” tall. The outside diameter is 30mm, inside diameter is 10mm and the thickness is 11.85mm. Weight: 62.0Lbs (24.5kg)
Question:	Will this work for metric pipe as well
Answer:	Overall Dimensions: 10.75” wide X 17” long X 15.75” tall. Weight: 62.0Lbs (24.5kg)

Product features

RIDGID Model 103 Close Quarters Tubing Cutter

Specifically designed for use in restricted spaces on small diameter, hard and soft copper, aluminum, brass and plastic tubing.

• Rollers include grooves for close-to-flare cuts on models 101, 101J and 118.
• Strong, lightweight slide and wheel housing, and large knurled feed screw knob give easy control of cutting pressure for clean cuts.
• Models 117 and 118 include a self-feeding AUTOFEED cutter wheel that automatically cuts after tightening the knob only once.
• The Model 118 features a special knob for easier tightening of the feedscrew.
• Model 101-ML is for multilayer tubing only.

Product description

Specially designed for use in restricted spaces on small diameter tubing, the RIDGID 32985 Close Quarters Tubing Cutter makes tight cutting jobs more manageable. Constructed for durability and ease of use, the metal tube cutter features a strong yet lightweight slide and wheel housing and a large knurled feed screw knob that results in clean cuts by ensuring easy control of cutting pressure.

This copper tubing cutter has a 3/16-inch to 15/16-inch cutting capacity and effectively cuts hard and soft copper, aluminum, brass and plastic tubing.

RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.

From the Manufacturer

Since 1923, Ridgid has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the Ridgid brand is engineered to the same high standards of quality, strength and endurance, as was that first heavy-duty pipe wrench more than 80 years ago. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. The Ridgid 32985 close quarters cutter is specifically designed for use in restricted spaces on hard and soft copper, aluminum, brass and plastic tubing. It has a strong, lightweight slide and wheel housing with a large knurled feed screw knob that gives the user easy control of cutting pressure for cleaner cuts.

• Cuts hard and soft copper, aluminum, brass and plastic tubing
• Specifically designed for use on small diameter tubing in restricted spaces
• Strong, lightweight slide and wheel housing and large knurled feed screw knob allow easy control of cutting pressure for clean cuts
• Tubing cutter has a 3/16-inch to 15/16-inch (5 mm to 24 mm) cutting capacity
• RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool

User questions & answers

Question:	Is the handle round or oval
Answer:	I assume by handle you mean the knob that controls the blade disc... it's round.
Question:	What is the minimum and maximum in millimeters that it can cut
Answer:	hi, minimum 5 mm and max 24 mm.
Question:	will this cut on CPCV pipe
Answer:	It cuts copper,so I assume it would
Question:	What's the minimum and maximum pipe diameter that it cuts
Answer:	Accommodates piping with diameters measuring 3/16 in. 15/16 in.

Product description

The RIDGID 32573 2-in-1 Close Quarters AUTOFEED Cutter with Ratchet Handle is designed for easier cutting of hard and soft copper, aluminum and brass in tight, restricted spaces where the cutter cannot be rotated by hand. With its 2-in-1 design, the tubing cutter can be used alone or with the ratchet handle, a light and ergonomic accessory that offers greater flexibility and mobility when cutting. The rugged, compact handle attaches to the cutter and operates in ratchet steps as small as 10 degrees, allowing for fine indexing in tight spaces. The easy-to-turn football-shaped knob only needs tightening once and the spring-loaded cutter wheel automatically cuts, for ease of use in hard-to-reach areas. Close quarters tubing cutter has an adjustable 1/4-inch to 1-1/8-inch (6 mm to 28 mm) outside diameter capacity. This tubing cutter includes a spare E-3469 Cutter Wheel in the knob. Ratchet handle is also compatible with the model 101 tubing cutter and E-1740 soft flexible plastic cutter wheel. RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength, and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.

From the Manufacturer

The Ridgid 32573 118 Close Quarters Quick-Feed Cutter can now be enhanced with a ratchet handle that allows for easier cutting in tight, restricted spaces. Of rugged and compact design, the handle can be attached to the cutter and operated in ratchet steps as small as 10 degrees. This allows for fine indexing of the cutter to operate in tight spaces. The new ratchet handle allows more flexibility and mobility while keeping the AUTOFEED features of the model 118 Cutter, which is designed to cut hard and soft copper, aluminum and brass. The 2-in-1 close quarters cutter can be used alone or with the ratchet handle, a light and ergonomic accessory to help use the cutter in tight and restricted spaces. This cutter is easy to use in hard-to-reach areas because the knob only needs to be tightened once. The handle works in tight spaces that are too small to rotate the cutter by hand. The 32573 is adjustable to any size from 1/4-Inch to 11/8-Inch OD. This tubing cutter comes with a spare E-3469 cutter wheel in the knob. Since 1923, Ridgid has remained the symbol of certainty to dedicated professionals of the expert trades. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

• Featuring a 2-in-1 design, the tube cutter can be used alone or with the attachable, light and ergonomic ratchet handle
• Designed to cut hard and soft copper, aluminum and brass
• Rugged and compact ratchet handle attaches to cutter for easier cutting in tight, restricted spaces; handle can be operated in ratchet steps as small as 10 degrees
• Cutter is easy to use in hard-to-reach areas because the knob only needs to be tightened once
• Tubing bender has an adjustable 1/4-inch to 1-1/8-inch (6 mm to 28 mm) outside diameter capacity

User questions & answers

Question:	Will it cut 1" copper tubing thats actually 1 -1/8 od
Answer:	yes . Very sturdy pipe cutters. Handles are comfortable and product is song and durable. Cut on pipe is very clean. Great cutters!
Question:	It uses the same blade as rigid 101 and 104 that claim they cut pvc. why won't this model do the same
Answer:	I would not use this type of cutter for copper pipe, as it would try to smash the pipe some. Use your normal wheel cutter.
Question:	Will this cut 1/2” electric conduit in close courters
Answer:	for $14 just buy a new tool.. I use mine for home use and I cant for see me wearing it out if properly used on materials it is designed for. For the price it works well.
Question:	can the handle be purchased separately? Already got the cutter
Answer:	1 1/2 in. pvc is 1.9 outside dia. that is more than 1 5/8

Product features

Designed to Cut Various Materials

The RIDGID 32573 2-in-1 Close Quarters AUTOFEED Cutter with Ratchet Handle is engineered to easily cut hard and soft copper, aluminum and brass. Sleek and lightweight, this tool can reach tight and restricted spaces where the cutter cannot be rotated by hand.

Versatile and Multipurpose

With its 2-in-1 design, the RIDGID 32573 2-in-1 Close Quarters AUTOFEED Cutter with Ratchet Handle also functions as a tubing cutter that can be used alone or with the ratchet handle. A super lightweight and ergonomic accessory to use, the RIDGID 32573 2-in-1 Close Quarters AUTOFEED Cutter with Ratchet Handle offers greater flexibility and mobility when cutting.

Rugged and Compact

The handle of this tool attaches to the cutter and operates in ratchet steps as small as 10 degrees, allowing for fine indexing in tight spaces. It also features an easy-to-turn football-shaped knob that only requires to be tightened once and has a wide outside diameter capacity.

Product description

Cuts PEX Pipes from 1/8", 1/4", 3/8", 1/2", 3/4", 1"

• Cuts PEX Pipes from 1/8", 1/4", 3/8", 1/2", 3/4", 1"
• Makes STRAIGHT CLEAN BURR-FREE Cuts
• Newest Ratcheting Design is more Labor-saving and Convenient,Spring loaded handle for quick opening/fast cutting. Only One Hand is Needed to Complete the Cutting Operation Smoothly
• Package Dimensions: 2.692 L x 21.310 H x 5.791 W (centimeters)

Product features

YIYITOOLS Pipe Cutter

Changzhou YiYiTools Factory is an extroversive enterprise with 20 years of professional experience in the production and sale all kinds of rubber hammer, dead blow rubber hammer, plastic dead blow rubber hammer, hammer with plastic, rubber hammer and the installation of the rubber and plastics products and other hand tools. After years of efforts, the size of the enterprise expanding continuously.

Ergonomics Design

The professional tube cutter adopts ratchet drive technology to greatly save your strength.

Easy To Operate

Tubing cutter built with comfortable, ergonomic, textured handles that provide a reliable grip.

Wide Application

This PVC Pipe Cutters is ideal for use on a variety of plastic pipe and tube.

• 2 pack of Replacement Blades for this tube Cutter.
• The rollers and the blade utilize ball bearings for smoother action.
• Made from aluminum alloy and Wear-resistant steel blades ensures a durable and sturdy usage.
• Capacity from 3/16-inch-1-1/4-inch (4-32mm). Adjustable cutting depth designed for fast and safe cutting.
• With clean, no burrs and smooth cuts on copper tubing and stainless steel tubing without deforming the peaks of corrugations.

User questions & answers

Question:	will it cut brass tubes
Answer:	Yes. I used it to cut copper lines running to my hotwater heater.
Question:	Will this cut EMT conduit
Answer:	Yea
Question:	Were do they sell extra cutting wheels
Answer:	I assume you can order them from Amazon. A hardware store, maybe?
Question:	Does this cutter work on oval stainless steal rods used for closets
Answer:	I'm not sure but I cut 1/2"- 3/4" stainless steel tubing at my job. It's a good tubing cutter plus it comes with 3 extra blades

Product features

About IWISS

IWISS Tools, founded in the year of 2008, has established two production bases to manufacture pipe tools and cable tools respectively by 2013. We're frequent exhibitor of American AHR Expo and National Hardware Show, Mexican Expo Guadalajara, Australian ARBS, Italian MCE Expocomfort, Russian Auqatherm Moscow and Chinese Canton Fair.

Product description

Designed for optimal performance, the RIDGID 29963 Stainless Steel Tubing Cutter quickly and easily cuts stainless steel tube to the length you need. Featuring an innovative design, the tube cutter has 6 individual bearings that replace traditional rollers. These bearings create a smoother cut and allow for increased speed around the tube. Also, helping deliver a smoother cut, the specially designed stainless steel cutter wheel contains bearings in the hub, decreasing drag around the tube.

The tubing cutter has a contoured frame that allows for easy alignment while adjusting the cutter to make a cut, and it is equipped with an ergonomic knob for easy adjustments. Built for maximum performance, the cutter now includes an X-CEL knob design for quicker cutting.

This steel tube cutter has a 1/4-inch to 1-3/8-inch cutting capacity.

RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.

From the Manufacturer

Since 1923, Ridgid has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the Ridgid brand is engineered to the same high standards of quality, strength and endurance, as that was first heavy-duty pipe wrench more than 80 years ago. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. The Ridgid 29963 35S Steel tubing cutter has been designed for optimized performance on stainless steel tubes. It has six-individual bearings that replace the traditional rollers. The bearings create a smoother cut and allow for increased speed around the tube. Also it has ergonomic knobs that allow for easy adjustments

• 6 individual bearings replace traditional rollers, creating a smoother cut and allowing for increased speed around the tube
• Contoured frame allows for easy alignment while adjusting the cutter to make a cut
• Features a specially designed stainless steel cutter wheel that contains bearings in the hub, decreasing drag around the tube for a smoother cut
• Ergonomic knob allows for easy adjustments
• Steel tube cutter has a 1/4-inch to 1-3/8-inch (6 mm to 35 mm) cutting capacity

User questions & answers

Question:	What size do they cut
Answer:	Yes.Easy to use Cutter! Improted Blade form Japan，I have strength problems with my hands, but this cutter is so easy to use and provides clean cuts on PVC pipes and plastic tubing every time. This has been an incredible time-saver in putting my automatic watering system together for my hydroponic vertical garden. I highly recommend this cutter and to me, worth every dollar. Just a great performing tool.
Question:	Can this be used for copper and aluminum as well
Answer:	Try the manufacture web site.
Question:	does anyone know the total width of the rollers
Answer:	Yes. I used this to make about 70 cuts on 1" pvc. Wear gloves. Sometimes the handles pinch at the end of the squeeze. I learned the hard way after the 1st 10. I like this pipe cutter because of the price, light weight and bright color. I like brighter color tools as I get older. Easier to find in the garage.
Question:	will this cut a schedule 40 1" steel pipe (OD
Answer:	Yes, I have used it on pex tubing.

Product features

RIDGID Model 35S Stainless Steel Tubing Cutter

These tubing cutters have been designed for optimized performance on Stainless Steel tube.

A contoured frame allows for easy alignment while adjusting the cutter to make a cut.

• Ergonomic knob allows for easy adjustments.
• Now includes X-CEL Knob for quicker cutting.
• Six individual bearings in the 15-SI and 35S and 12 in the 65S replace traditional rollers. The bearings create a smoother cut, and allow for increased speed around the tube.
• Specially designed Stainless Steel cutter wheel in 35S and 65S contains bearings in the hub, to decrease drag around the tube for a smoother cut.

Product description

The scissor-style RIDGID 23488 Single Stroke Plastic Pipe and Tubing Cutter is an easy-to-use tool that's ideal for cutting plastic tubing and pipe. Designed for quick and easy use, the pipe cutter features spring-loaded handles for faster positioning of easy, single stroke cuts. Built to last, its reversible blade provides two times the blade life.

This tube cutter has an 1/8-inch to 1-5/8-inch O.D. capacity and is suitable for cutting plastic (PVC, CPVC, PP, PEX, PE). This single stroke cutter is not suitable for cutting multilayer tubing.

RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.

From the Manufacturer

Since 1923, Ridgid has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the Ridgid brand is engineered to the same high standards of quality, strength and endurance, as that was first heavy-duty pipe wrench more than 80 years ago. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. The Ridgid 23488 PC-1250 cutter is an easy-to-use tool that can cut all types of plastic or rubber tubing and pipes up to 15/8-Inch outside Diameter. It comes with an X-cel blade which is quick to change and also has a reversible blade making it equal to two-times the blade life. With this cutter there is no ratcheting or twisting required. Also it has spring loaded handles for faster positioning and has a compact size for easy storage

• Cuts plastic (PVC, CPVC, PP, PEX, PE)
• Spring-loaded handles allow for faster positioning. Single stroke, easy cut
• Features a reversible blade that provides two times the blade life; Not suitable for cutting multilayer tubing
• PVC pipe cutter has a 1/8-inch to 1-5/8-inch (3 mm to 42 mm) outer diameter capacity
• RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool

User questions & answers

Question:	The cutting diameter details states, "up to 15/8-Inch outside Diameter". Is that supposed to be
Answer:	That is 1and 5/8 inch.
Question:	We’re do I get blades
Answer:	Search for the Ridgid 26803 PC-1250 Replacement Blade. I found them on Amazon as well as through several other sellers.
Question:	How does this do on PVC
Answer:	The largest PVC I've been able to cut is 3/4" sch 40 and I had to squeeze real hard with both hands. It shifted in the jaws and made a slightly crooked cut.
Question:	where is it made
Answer:	The one I bought in 2016 was made in China. It is very lightweight and feels cheap.

Product features

RIDGID 23488 Model PC-1250 Single Stroke Plastic Pipe and Tubing Cutter, 1/8-inch to 1-5/8-inch Pipe Cutter

• For plastic (PVC, CPVC, PP, PEX, PE) and multilayer tubing.
• Spring-loaded handles for faster positioning. Single stroke, easy cut.
• PC-1250 features a reversible blade providing two times blade life. Is not suitable for cutting multilayer tubing.

Product description

If you’re working with pipes, you’ll need to cut them at some point. Whether you’re a plumber, HVAC specialist, boiler worker, or other industrial worker, you’ll benefit from Milwaukee’s 12 Volt lithium ion copper pipe cutter. Rather than hack through your tubing with a handsaw or other crank-operated hand tool, simply pull the trigger on this powerful device and you’ll be able to rip through 3/8" to 1” piping with ease. Don’t worry about adjustments, because the 2471-20 will do it for you. Simply hold it over the pipe, press the trigger, and hold on until the unwanted end of your pipe falls away. Its motor runs at up to 500 RPM, so you know you’ll be able to tear through it with ease. Damp environments won’t weaken the strength of this tool, either. Its insulated design keeps water out of the motor and other moving parts, letting you focus completely on the task at hand without fear of unnecessary wear. While it works best with the 12V Red Lithium line of batteries, this cutter will function with the other 12 Volt lithium ion or NiCad batteries offered from Milwaukee (batteries not included). For industrial applications where time and quality are of the essence, look no further than the Milwaukee 2471-20 to fulfill your needs with ease.

From the Manufacturer

Milwaukee Electric Tool Corporation introduces the industry's first M12 Copper Tubing Cutter, specifically designed for cutting copper with the speed and versatility that plumbers, mechanical contractors and remodelers require. With a 12-Volt LITHIUM-ION battery and ultra efficient gearing, the 2471-22 performs over 200 cuts on a single charge. A close-Quarter rotating head cuts installed copper tubing with as little as 1-1/2-Inch of clearance. At 500 RPM, the patent pending cutting mechanism cuts copper tubing up to 10X faster than conventional cutters and automatically adjusts diameter to cut through 3/8" – 1" copper tubing (1/2-Inch – 1 1/8" OD, Type K, L and M). The inline design offers greater reach and reduced wrist strain in confined spaces. The metal cutting head is corrosion and rust resistant and is sealed for protection from water. Electronic overload protection and uni-body construction provide exceptional durability. Additional features include a battery fuel gauge, which displays the remaining run-time and a built-in LED work light which illuminates the work surface. Backed by Milwaukee's 5-Year tool warranty.

• AUTOMATIC ADJUSTMENT: Wrap this around type K, L, and M copper pipes and it will adjust from between 3/8" and 1” automatically
• WATER RESISTANT: The head of the unit is sealed tightly to prevent water from leaking in and damaging the motor. Ideal for plumbing applications
• HIGH POWERED MOTOR works at up to 500 RPM, letting you work up to 10 times faster than standard hand-operated pipe cutters or saws
• LOW CLEARANCE: You can use this with piping that is as little as 1 1/2“ away from a wall without risk of damage to the tool or pipe
• RED LITHIUM COMPATIBLE: This tool will function with the batteries in the Milwaukee M12 lineup. These include the 48-59-1201, 48-11-1970, 48-11-2401, 48-11-2430, 48-11-2460, 48-11-2420, 48-11-2402, and 48-11-2440

User questions & answers

Question:	Can you use the m18 red lithium xc 5.0 battery in this tool
Answer:	No. this is a 12 volt tool
Question:	Will this cut 1" copper that is slightly out of round I can do it was regular cutters is just a pain
Answer:	not sure. never tried on out of round pipe
Question:	Will it work on 3/4 PVC plastic pipe
Answer:	I don't think so but probably it will takes like 5 or 10 minutes when with a PVC cutter takes 2 seconds for around 8 or 10 bucks. Even with a handsaw it's faster. Reason: it's intended to be used for copper pipes from 1/2 to 1 inches.
Question:	I bought the cutter. Love it. I used it with alittle water in the line and the unit stopped working for 24hrs. Any idea why
Answer:	This must be some type of safety feature because it has happened to me before where it will just stop working for a while. Then it will come back on every time.

Product description

The Klein Tools Professional Tubing Cutter features an accurate 4-roller tracking system. This keeps the tube from threading and helps eliminate spiraling. This professional reaming tool is great for HVAC work. Cuts 1/8-Inch to 1-3/8-Inch steel and copper tubing. Employs accurate 4-roller tracking system to eliminate spiraling. Large handle is comfortable and easy to turn. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.

• Accurate 4 roller tracking system - no spiraling
• Professional reaming tool
• Extra cutting wheel included; simply remove screw in the back and open the handle to access
• Replacement cutting wheel available (Cat. No. 88905)

User questions & answers

Question:	What is the maximum wall thickness of the tubing it can cut
Answer:	the thickness of steel conduit wall. It is a heavy duty tubing cutter.
Question:	Can this cut stainless steel tubing
Answer:	I was able to cut 15/16" OD steel conduit. I don't know about stainless steel.
Question:	is this made in the USA
Answer:	its made in spain, if it helps i have been in construction 41 years and this is the best cutter i had yet, the built in reamer works so good.
Question:	Does it cut emt? And does tje reamer work or is it junk
Answer:	I have been in the construction since 1980, I do commercial electrical work , all my life I gave rigid cutter a go for, bit this is way better then rigid cutter- the 4 wheel is a great improvement over the two wheel rigid had, with this cutter you can go left or right without it walking. the reamer is most definitely the best feature, and yes it really works. I even ream emt with wire in the pipe, just go slow and move wires as you turn. cost a bit more than rigid, but you wont be sorry if you get it.