10 best tool iwiss for copper crimping

• Secure crimping in seconds; Automatic locking of pressing tongs
• Rotating 360 degree head; Extendable handles for improved leverage
• Creates leak-free connections ,No more brazing, soldering or flaring
• Safe Handling with slip-proof rubberised handle grips; Easy two handed operation
• Compatible with Viega Copper,Pro-Press,Elkhart,Conex Pipe Fittings

User questions & answers

Question:	Can i order the other sizes like
Answer:	No, the arm weight is factory preset.
Question:	Does the tool need to be adjusted or is it ready to use. Are the adjustment instructions just in case the tool comes out of adjustment over time
Answer:	you can cut it at the designated points but wont be able to use the excess
Question:	Can this tool do 1/2" copper T fitting
Answer:	Yes, they can be connected.
Question:	Can we use the same tool to crimp pex fiitings
Answer:	1,IOS users need to import music from iTunes to local music when using music mode 2,Enter Music mode(via phone app). 3,Click to start playing music (it will choose from your local music).

Product features

IWS-1632AF Copper Tubing Pressing Tool Kit with 1/2",3/4" and 1" Jaw

Product description

F1807 American standards With Interchangeable jaw set 3/8,1/2,3/4-inch, the tool itself is 1-inch With Crimp Ring Removal Tool ,which Used To Remove 1/2-inch to 1-inch cable ring With Go/No-Go Gauge and spanner Suitable for narrow space and pipe maintenance Tough plastic tool kit helps you keep track of all your crimping tools Tool sets used to fasten PEX pipe to brass or poly fittings using copper crimp rings Includes: 1-inch Crimping Tool with three interchangeable jaws 3/8,1/2,3/4-inch 1* Copper Ring Removal Tool 1* Pex Pipe Cutter 1* GO NO GO Gauge 1* Wrench 1* Suitcase

• Meet ASTM F1807 Standard
• With Interchangeable jaw set 3/8,1/2,3/4-inch, the tool itself is 1-inch
• With Crimp Ring Removal Tool ,which Used To Remove 1/2-inch to 1-inch copper ring
• With Go/No-Go Gauge and spanner Suitable for narrow space and pipe maintenance
• Tool sets used to fasten PEX pipe to brass or poly fittings using copper crimp rings

User questions & answers

Question:	What about refrigeration fitting
Answer:	Ia don't think it will get that small for refrigeration fittings.
Question:	How long is the tool
Answer:	The length of tool is 38cm/15inch.
Question:	What is the difference between the long kit and short kit
Answer:	I have the short set(red) it is a little shorter in length so the effort to crimp is higher, but it let's you get into a slightly more cramped area. (the handles open to almost 180 degrees to get over the pipe.
Question:	Has anyone had to adjust dial pressure default of 1 and 2 on the dials? I will use for 3/4. I guess you adjust based on go/no, but wanted to ask. Tx
Answer:	The tool is factory-adjusted with different number, you can use it directly without any calibration.It only need calibration after long time using.

Product features

IWS-FA PEX TOOL KIT

This toolset includes all tools you need for a plumbing renovation in your house .You can remove the old pex connection and installation new one.

• 1.Meets ASTM F1807 Standard and comes with Go/No-Go gauge.
• 2.Ergonomical handle design with comfort grips minimizes user fatigue.
• 3.Polished Jaws ensure no damage of cooper rings and get a perfect crimp connection.
• 4.Adds NEW FUNCTION of reshaping deformed 1/2” and 3/4” copper crimp rings by itself.
• 5.2-in-1 PEX PIPE Tool used to fasten PEX Copper Crimp Rings in 1/2 inches and 3/4 inches.

User questions & answers

Question:	Will this tool work with shark bite products
Answer:	It is plugged to use.
Question:	What is the difference between models iws-1234p .... and .... iws-1234ps
Answer:	Nope, but I really like the unit. 🤗
Question:	Does the tool come with a case
Answer:	I’m not sure about the skipping but the speed up and slow down probably is caused by an issue with the belt. Incidentally I had to return 2 of these because of defects so let the buyer beware...
Question:	Will this crimper work with all fittings ,metal,brass,copper,just asking because I seen a comment saying it didn’t thanks
Answer:	Yes. it play 7, 10, and 12 inch records. It also plays 2 different speeds, 33 1/3, and 45.

Product features

IWS-1234PS PEX COPPER RING CRIMP TOOL

• Combination 1/2" and 3/4" 2-in-1 PEX Crimping Tool for PEX copper crimp rings
• No need to change tools to switch from 1/2" to 3/4" - both sizes are in one tool
• 20% lighter than most PEX crimp tools to help you stay on the job longer with less fatigue without sacrificing tool strength.
• Soft comfort grips increase crimping power and lessen chance of slippage
• Easily calibrated; simple instructions are on the handle
• Crimps conform to ASTM F-1807 Standard Specification
• Includes Go/No-Go gauge to check crimps

• SWAGING SLEEVES: Swage steel, copper and aluminum oval sleeves and stop loops to wire rope.
• PREMIUM STANDARD: Made of High carbon, heat-treated and polished jaws for excellent crimp and durability.
• FEATURES : The heavy-duty wire rope crimping tool crimps from 1/16-inch to 3/16-inch. Long Handles helps you have better leverage.
• PACKAGE INCLUDES : One wire roper swager and one wire cable cutter. Cutting up to -INCH (3.5mm) steel cables, single stand wires like fencing wires.
• WIDELY USES: Decking, DIY Balustrade, DIY Projects, Clotheslines, Outdoor Shades or Hanging String Lights. Note : Do not use on coated wire rope without first removing the coating from the assembly area.

User questions & answers

Question:	What is the warranty
Answer:	Only good for crimp sizes you have for tool
Question:	do they have a swager for bigger than
Answer:	The adjustments are there to adjust the crimp. Generally it is ready to go out of the box. This is for pro press copper fittings not pex crimps. Great tool
Question:	what comes in box
Answer:	The T fitting can be done but it is the trickiest one. The crimping edge is closer to one side than the other so you need to have that side closest to the fitting. Because of the tools size, you will need to figure out the best way to get the tool in tight areas. Some connections are better done first, then put the pipie in place.
Question:	can i use this tool for 5mm metric wire rope
Answer:	This product is only for copper fitting. And there is no need to use such a tool for pex fittings

Product features

IWISS WIRE ROPE CRIMPING TOOL

Engineered for field conditions, IWISS toggle-action tools are manufactured from alloyed forged steel with specially hardened working surfaces. Tools are designed to create maximum metal flow of the splicing sleeve around the wire or conductor. This results in splices that are strong and reliable. The toggle-action mechanism produces perfect splices with a minimum of handle force.

• Meet ASTM F1807
• Combo Crimping Tool for 1/2-inch and 3/4-inch
• With high quality made from tool steel,come with 20PCS 1/2-inch and 10PCS 3/4-inch Copper Ring & Pex Cutter&GO NO GO Gauge
• Smart design help you reach into tight connection and make the pipe installation easier.
• Well polished jaws ensure no damage for copper ring and bring secure&reliable connection

User questions & answers

Question:	Is this a 3 stage crimp tool
Answer:	Yes, this tool works with Sharkbite copper rings and fittings and all the products who meets ASTM F1807 standard.
Question:	will this handle sharkbite stainless steel rings
Answer:	Both of them works on copper crimp rings. IWS-1234PS is shorten than IWS-1234P in length.
Question:	Does this need to be calibrated
Answer:	No, it does not come with case. But this is a GREAT tool, used it on a bathroom reno.
Question:	Is a lot of muscle needed for this tool? I rented a different crimper the other day and it was all I could do to crimp one in a tight place
Answer:	This tool works with all fittings, metal brass and copper rings, which meet ASTM F1807 standard.

Product features

OPEN THE HANDLES

Pull the upper handle upward and then backward.(DO NOT force the handles apart)

CRIMP THE COPPER RING

Align the jaw open around the copper ring and squeeze the handles until fullly closed.

CHECK WITH GO/NO-GO GAUGE

When the copper ring slides into the slot and stops in the "Go" range,the crimping is good.

EFFECTIVE SOLUTION FOR HOME RENOVATION

• Features : Meet ASTM F1807 Standard with 1/2",3/4",3/8" and 1" Press Jaws
• Easy to Use : Wrench changes jaws and available adjusts crimping force. Short length and light weight, easy to carry and work in tight space
• Effortless Design : Ergonomical handle design with comfort grips minimizes user fatigue
• Crimp Rings Type : Tool sets used to fasten PEX pipe to brass or poly fittings using copper crimp rings
• Safe : Perfect locator and perfect polished press jaws ensure no damage on copper rings and pipes

User questions & answers

Question:	Should this tool pinch the copper crimp rings? I bought some at menards and it pinches them more in an oval shape
Answer:	May I know the brand of your copper crimp rings? The jaw of our tool is circle and the crimp result is in a circle shape, not oval shape.
Question:	What is the tiny tool on the handle
Answer:	I think you're referring to the "go / no-go" gauge, which is the black, rectangular piece of metal with arches cut into it. You set the gauge over the ring you crimped to the PEX piping and check if it sits too high or sits completely flush against the ring. The gauge for the particular ring size (e.g, 3/8", 1/2", etc.) should rest about half-way when setting it onto the ring you just crimped. This is to give you an idea if the crimp was not enough or over-crimped. In either of those cases, you could end up with a leak and you'd need to adjust the crimp level of the main tool. I found with mine that it was already set to the correct amount of crimp pressure for the rings I used, so there was no need to adjust. However, you may find it needs to be adjusted especially if you use various brands of crimp rings, and their overall thickness, which can vary slightly depending on manufacturer.
Question:	My tool is set right side on one left side on two. When adjusting tension do both sides have to be equal numbers or will that oblong ring
Answer:	I would make sure tension is same on both, usually set right from factory, it can be off a little..
Question:	th item in the description says "Crimp rings: ....", but I do not see rings in any of the pictures. Are they included
Answer:	Crimp rings are not included. The 4th bullet point clarifies which crimp rings are used for.

Product features

IWISS F1807 Multi-Head PEX Crimp Tool Kit

PEX Crimp Tool Kit works with 4 sizes of PEX tubing - 3/8", 1/2", 3/4" and 1'' - all in a compact and durable carrying case. Compatible with all types of PEX copper crimp rings and crimp style PEX fittings. PEX crimp tool kit allows you to make a secure connection to PEX tubing with copper crimp rings 3/8 in., 1/2 in., 3/4 in. and 1 in. in size (copper crimp rings sold separately). The kit boasts a 1 in. PEX crimp tool and three dies for each crimp size, which can be changed without any special tools. The kit also includes a go/no-go gauge for gauging crimps and lightweight, composite handles, which reduce fatigue as you work. The tool is factory calibrated and all crimps conform to the ASTM F-1807 standard.

Compatibility:

• Copper crimp rings (Sioux Chief, Watts, Nibco and other brands);
• Brass or Poly crimp style PEX fittings;
• All types and brands of PEX tubing - Everhot, Viega, Nibco, Watts, Zurn, etc.

• Meet ASTM F1807 Standard, compatible with 1/2-inch and 3/4-inch copper ring in PEX pipe connection
• Well-polished jaws ensure no damage to the copper rings to avoid leaking
• Constructed of durable steel ensure an integrated mechanical property and calibration function supports a long service life
• Lightweight and short handles improve the performance of operability in narrow space
• The innovative new design saves deformed rings and Pre-crimping function brings quick&easy installations

User questions & answers

Question:	What is the tools warranty
Answer:	We promise half-year warranty.
Question:	If you have connected all fitting an one links will tool open enough to fit over water line with out cutting line so you can clamp ring tighter
Answer:	Sorry, at present there is no other tool works for 1/4 cables and ferrules.
Question:	Should the fitting spin after crimped
Answer:	Package includes the sleeves crimping tool and cable cutter.
Question:	Does this crimping tool ratchet
Answer:	You may be pushing the limits here a little... If 5mm 'still' equals approximately 0.19685" (5 divided by 25.4 ... converting mm to inches). Then... 1/16"-3/16" (0.0625"-0.1875") is the range of this tool. The description says up to 4mm(0.157"), though 3/16" (0.1875) is super close to 5mm. The description is correct so far as math is concerned, but it is my experience in the field that it probably might work, with tolerances and all. Just DO NOT APPLY THIS LOGIC TO CABLE RIGGING OF AN AIRCRAFT!! ANY AIRCRAFT, Cessna or 747. (PERIOD!). It is outside of specification (I know, all of aviation is in inches anyway, jus' sayin'). Dang it, I just did the thing that frustrates me the most in Amazon answers; I haven't ACTUALLY tried this (or done it), just offered an educated guess. Whelp, GOOD LUCK!! (YMMV)

Product features

BRING CONVENIENCE INTO YOUR LIFE

• 【Product upgrade】NEW 「 HX-50BI 」with 6 dies in AWG: 8,6,4,2,1,1/0,NOT IN METRIC
• 【Precise dies】Hexagonal rotating dies are processed with Wire EDM Cutting, more accurate than normal casting dies.
• 【Comfortable operation】Comfortable grip with antislip surface saves strength and improves user's experience.
• 【Solid construction】Made of high quality carbon steel which can offer long service life.
• 【Versatilel】Compatiable with copper&aluminum cable lug,non-welding and standard electrical connection.

User questions & answers

Question:	Is there a warranty on this
Answer:	It can hold a lot of small things, but not suggested hold too many heavy things, after all, the product is not very big. At least I can hold about 20 pens and it won't slide down. so convenient pen holder.
Question:	Does this come with lugs
Answer:	It will set flat on a desk, but without the magnet to support it, not sure how steady it will be. It might fall over when filled with pens. I have a metal vertical file tray on my desk, and attach it to that via the magnet. That way it is very sturdy.
Question:	Are the awg dies just metric dies relabeled in awg or are they sized properly as well? can the dies be purchased seperatly
Answer:	The flat part with the magnet is 3-1/4" long. From front to back it is about 1-1/8" wide. From top to bottom it is 4" tall.
Question:	Will it crimp 6 awg 'insulated' ring connectors
Answer:	I don't think it would. I will hold 12 regular pens, and about 8 regular sharpie sized pens.

Product features

FEATURES

• Built in 6 AWG standard dies : 8, 6, 4, 2, 1, 1/0
• Hexagonal rotating dies processed with Wire EDM Cutting,more accurate than normal casting dies
• Made of high quality carbon steel ,durable and sturdy
• Comfortable grip with anti-slip surface saves strength and improves user’s experience
• Application : Copper&Aluminum Cable lug and Non-Welding&Standard Electrical Connection
• Compatible with most of connectors from Blackburn,Burndy,ILSCO,Pamduit,T&B,etc.

• Tool is factory calibrated. PIPE CUTTER is inside of 1/2"Crimper!!
• Angled-heads for access to tight spaces with ease.
• Go/No-Go Gauge and PEX PIPE CUTTER and Instruction included.
• Polished crimp jaw ensures no damage both on PEX Pipe and Copper Crimp Rings.
• Lightweight composite handles reduce fatigue Works with 1/2-inch and 3/4-inch PEX copper crimp rings and meets ASTM F1807 standard.

User questions & answers

Question:	The Amazon listing says this unit works on both copper and stainless steel rings, but box says: "Used for pressing stainless steel sleeves only
Answer:	It is a 2 stage. Crimp halfway. Adjust the knob, then crimp the rest of the way.
Question:	So, it appears that iws-1234p, along w/the iws pipe cutter, are a more economical approach than the angled head 'separates' in this kit, right
Answer:	hello Paul, this tool is for copper ring meet astm 1807 standard, it's not for stainless steel ring.
Question:	How much room or space do the tools need to operate? Can they operate in tight spaces? Between two joists on 16" center
Answer:	hello, I used this unit right out of the box, approximately 75 1/2 and 50 3/4. It worked perfectly, no leaks and no calibration was needed. I highly recommend this kit. The angle of the jaws helped in many tight locations. You can't go wrong with this one, I love it. The carrying case even carries spare 1/2 and 3/4 crimp rings right in the case, so you are always ready to go. Hope this helps.
Question:	How hard is it to crimp with these ? Can you do it one handed ? Our current shark bite ones have longer handles. Leary of handheld concept
Answer:	The first time I used it was in a tight place. I found it to be easy to crimp using moderate pressure.

Product features

Copper Crimp Ring Combo PEX Crimping Tool

• Easily calibrated.
• 20% lighter than most PEX crimp tools to help you stay on the job longer with less fatigue without sacrificing tool strength.
• Crimps conform to ASTM F-1807 Standard Specification.
• Includes Go/No-Go gauge to check crimps.
• Angled head slides into tight corner easily.

• Swage copper& aluminum oval sleeves and stop loops to wire rope.
• Carbon steel and heat-treated with a rust resistant black oxide finish for durability .
• Built-in value added cutter cuts up to 1/8” aluminum and annealed copper wire ropes with ease.
• Well-polished swage jaw leaves no scratches on sleeves and prevents sleeves from being stuck after swaging.
• Multi-cavity of 4 grooves works from 3/64” to 1/8”. Note : Do not use on coated wire rope without first removing the coating from the assembly area.

Product features

IWISS new design wire rope tool built-in cutter function is required to properly make aluminum and copper sleeves and stops on wire rope.

• Swage copper and aluminum oval sleeves and stop loops to wire rope.
• Carbon steel and heat-treated with a rust resistant black oxide finish for durability.
• Built-in value added cutter cuts up to 1/8” aluminum and annealed copper wire ropes with ease.
• Well-polished swage jaw leaves no scratches on sleeves and prevents sleeves from being stuck after swaging.
• Multi-cavity of 4 grooves works from 3/64” to 1/8”. Note : Do not use on coated wire rope without first removing the coating from the assembly area.
• Package Includes:1 X IWS-1608M-C tool

IMPORTANT NOTE:

• Do not use on coated wire rope without first removing the coating from the assembly area.