12 best malco electric drills

Product description

The distinctive blue color of these chuck drivers is your assurance that they can withstand the kind of impact driver stress characteristic for each fastening application. And all Malco Impact-Grade power drivers are precisely machined for positive, fail-proof engagement of the fastener head. These Magnetic Hex Driver selections feature a spring-loaded, floating magnet that prevents breakage resulting from impact driver stress or higher profile hex head fasteners that may seat directly on the magnet.

• Hex Opening 5/16-inch
• Color Code Yellow
• Resists impact driver stress.
• Fail-proof engagement of fastener head.
• Unbreakable floating magnet.

Product description

Make fast, easy and precise crimps in larger or small round duct and pipe using this power assisted Crimper (C5A) from Malco. It easily attaches to your drill, and can be used on 24 to 30-gauge (0.71 to 0.41 mm) galvanized steel duct, spiral duct, black stove pipe or aluminum pipe. The drive shaft attachment inserts into the chuck of a minimum 14.4 volt cordless or maximum 7 amp a/C drill. Its 9: 1 gear reduction ensures safety and control, while the narrow slot prevents your fingers from entering the gear area for added safety.

• Attaches to any drill
• Precision air-tight crimping
• Crimping in galvanized duct, aluminum pipe, black stove pipe

User questions & answers

Question:	Can i used it for impact drill
Answer:	yes as long as they are 18 gauge brad nails
Question:	Can i use it with a impact drill
Answer:	This is a 18 gauge finish nailer. I used it on my deck to add finish molding to the 4x4 posts where they come through the deck. You'll need a framing nailer.http://www.amazon.com/Hitachi-Plastic-Collated-Full-Head-Framing/dp/B002JPJGFY/ref=sr_1_4?s=power-hand-tools&ie=UTF8&qid=1445004470&sr=1-4&keywords=framing+nailer

Product description

Turbo Shear, Straight, Left Cutting Action, Curve Type Tight Patterns, Right Angles, Metal Gauge 18 Mild Steel 20 Galvanized 22 Stainless Steel, Steel, Installs In Chuck Of 1200 RPM Or Larger Drill Including Tight Patterns And Square Cuts

The Malco TurboShear convert your power drill to a power shears. To operate this time-saving tool, simply insert the TurboShear directly into any 3/8-inch chuck of a standard 1,200 RPM A/C or cordless drill. This rugged but inexpressive accessory cuts straight and to the left. It makes fast cuts in sheet metal and is capable of navigating tight curved patterns and squares in heavy 20-gauge galvanized steel. Blind cuts require only a 1/2-inch starting hole. Cutting applications include both ferrous and non-ferrous sheet metals, metal roofing/building panels, vinyl, steel mesh, duct work, even the thick metal of furnace jackets, equipment enclosures or automotive body panels. An offset design keeps both hands away from work surface. The long-wearing hardened jaws are also replaceable.

• Turns your power drill into a power shear
• Inserts into chuck of an A/C or cordless drill
• 20 gauge capacity in galvanized steel
• Navigates tight patterns and square cuts
• TSDC Drill Clamp can be purchased separately
• Made in the USA

User questions & answers

Question:	could you use this for cold form steel framing? cutting studs, track, etc
Answer:	The ss404 and ss400 snapper shears are interchangeable not sure if it the same for the ss424 blades you'd have to contact the manufacturer directly
Question:	Does the handle come off
Answer:	I have never used them for that. I have some scrap pieces, maybe I should try that. I install laminate flooring to some times...
Question:	will it stainless steel of 1mm
Answer:	This works great on the 7/16" Hardie Backer. I have no doubt that it would also work just fine on 1/2" Hardie Plank. I am a 68 year old woman and have no trouble at all using this tool.
Question:	Can this cut HardiPlank
Answer:	Absolutely. In fact, I didn't know it would cut backer board. I built a shed with 5/16" hardiboard siding all the way around, and it was one of the life savers of the project.

Product features

Malco TS1 Turbo Shear 20 Gauge Capacity Sheet Metal Cutting Attachment

Description:

The time-saving TURBOSHEAR Model No. TS1 inserts directly into the chuck of a standard 1200 rpm A/C or cordless drill. It’s that easy to convert your power drill to a power shear!

This rugged but inexpensive accessory cuts straight and to the left and is capable of navigating tight curved patterns and squares in heavy 20-gauge (1.02 mm) galvanized steel. Blind cuts require only a 1/2”(12.7 mm) starting hole. Cutting applications include both ferrous and non-ferrous sheet metals, metal roofing/building panels, vinyl, steel mesh, ductwork, even the thick metal of furnace jackets, equipment enclosures or automotive body panels. An offset design keeps both hands away from work surface. Long-wearing hardened jaws are also replaceable.

Product description

The telescoping drill clamp fits drills and impact drivers large and small-including newer lithium-ion models. The recent redesign allows the tool to rotate 360-degrees and lock into position. The adjustment wrench now stores with the tool, preventing loss. The hex shank drive shaft attaches directly into the chuck of any drill or impact driver. Fast cutting blades are specialized for fiber cement siding only. The blades design minimizes dust. Wide skid plate design stabilizes for a precise clean cut (including window and door arches) in fiber cement siding up to 5/16” (8mm). Replacement blade TSF1RB.

• Attaches to a drill or impact driver you already own
• Easily cuts 5/16-inch Fiber Cement Siding Plank with minimal dust
• 360 degree rotating head for optimum tool clearance and material flow
• Able to cut precise arcs, straight lines and fine trimming
• Made in the USA

User questions & answers

Question:	Will it work on Dewalt 20 V max
Answer:	Not sure, compare your model of dewalt to the Hitachi
Question:	Does this come with the plactic carrying case that some other listings show
Answer:	I'm not an expert but I do not think it will fit, It fits my brad nailer and the narrow crown Hitachi. The Metabo you speak of looks much larger comparing in pictures.
Question:	Can I use this thing on fiber cementt3 feet by 5 feet
Answer:	13-1/2" W x 12-3/8" D x 1-3/4" T. It is not a blank case-it has the moldings to hold the brad nailer, and a few spots to hold packages of brads, and I've squeezed in a bottle of oil also.
Question:	Will these shears work on old, brittle cement-asbestos siding
Answer:	You would have to buy a pin nailer such as the Hitachi NP35A 1-3/8" 23-Gauge Pin Nailer, to handle the 23GA x 3/4" micri= that you mention.The brad nailer sold in the set only handles brad nails.

Product description

The distinctive blue color of these chuck drivers is your assurance that they can withstand the kind of impact driver stress characteristic for each fastening application. And all Malco Impact-Grade power drivers are precisely machined for positive, fail-proof engagement of the fastener head. These Magnetic Hex Driver selections feature a spring-loaded, floating magnet that prevents breakage resulting from impact driver stress or higher profile hex head fasteners that may seat directly on the magnet.

• Hex Opening 1/4-inch
• Color Code Red
• Resists impact driver stress.
• Fail-proof engagement of fastener head.
• Unbreakable floating magnet.

Product description

The distinctive blue color of these chuck drivers is your assurance that they can withstand the kind of impact driver stress characteristic for each fastening application. And all Malco Impact-Grade power drivers are precisely machined for positive, fail-proof engagement of the fastener head. These Magnetic Hex Driver selections feature a spring-loaded, floating magnet that prevents breakage resulting from impact driver stress or higher profile hex head fasteners that may seat directly on the magnet.

• Hex Opening 5/16-inch
• Color Code Yellow
• Resists impact driver stress.
• Fail-proof engagement of fastener head.
• Unbreakable floating magnet.

Product description

These quick-change Malco extension bits extend the reach of any 1/4-inch hex shank driver an extra 12-inches. The have a fast and easy push-in style receiver, with 3 ball bearing detents that holds any 1/4-inch hex shank power Groove or insert bit securely. The impact grade steel construction make these a reliable and durable tool to use on the jobsite. These impact grade Extension bits work with a drill, impact driver, and Malco CONNEXT1, CONNEXT2, and CONNEXT3 Ratcheting handles.

• Extends the reach of any 1/4-inch hex shank driver an extra 12-inches
• Fast and easy push-in style receiver, with 3 ball bearing detents that holds any 1/4-inch hex shank power Groove or insert bit securely
• Impact grade steel construction
• Works with a drill or impact driver
• Works with Malco connext1, connext2, and connext3 ratcheting handles

User questions & answers

Question:	The photo shows 4 extensions but the part number implies that this is only a 12" extension which is this 4 or 1 extention
Answer:	This will not fit this nailer. Part #884340 is the correct case for this nailer.

Product description

The distinctive blue color of these chuck drivers is your assurance that they can withstand the kind of impact driver stress characteristic for each fastening application. And all Malco Impact-Grade power drivers are precisely machined for positive, fail-proof engagement of the fastener head. These Magnetic Hex Driver selections feature a spring-loaded, floating magnet that prevents breakage resulting from impact driver stress or higher profile hex head fasteners that may seat directly on the magnet.

• Hex Opening 3/8-inch
• Color Code Blue
• Resists impact driver stress.
• Fail-proof engagement of fastener head.
• Unbreakable floating magnet.

Product description

The telescoping drill clamp fits drills and impact drivers large and small-including newer lithium-ion models. The recent redesign allows the tool to rotate 360-degrees and lock into position. The adjustment wrench now stores with the tool, preventing loss. The hex shank drive shaft attaches directly into the chuck of any drill or impact driver. The TSCM makes fast cross-cuts, lengthwise trim cuts, and circular or square outlet holes, in large or small corrugated patterns and other non-standing-seam panels including trapezoidal (box) profiles. Elongated offset blades with compact jaws allow the drill handle or battery pack to clear the roofing panel surface as the TSCM head follows the rising angle of corrugations and other angled profiles. A sleek, lightweight aluminum-cast shear head and compact molded polymer drill clamp allows maximum portability and ease to go wherever the work is. The shear can operate at high or low speeds for the control you need to follow a precise cut line. Hardened carbon steel blades combine to offer long service life in 30 to 24-gauge (0.31 - 0.61 mm) roofing panel metal. A lateral blade adjustment capability ensures that optimum cutting performance and maneuverability can be maintained for the life of the blades. Replacement blades TSCMRB

• Attaches to a drill or impact driver you already own
• Make fast cross-cuts, lengthwise trim cuts in large or small metal corrugated patterns
• 360 degree rotating head for optimum tool clearance and material flow
• Able to cut curves and straight lines
• Made in the USA

User questions & answers

Question:	I have to make valley cuts on Pro Rib roof sheeting. Which of these two is best; the TSCM or the TSHD? Many thanks
Answer:	The TSHD shear is enough, but I would buy the TSCM; it cuts thicker metal, it's a better unit.
Question:	Can this unit cut standard corrugated roofing as well as asphalt shingles
Answer:	Never cut asphalt shingles but this thing will cut metal roofing. Just a couple of tricks I learned, run drill about 1/2 speed and hold at 70 degree angle. Let the tool do the cutting, don't try to rush. Hope this helps. Practice a little and you will be satisfied. "Rooster"
Question:	need cutting shear for the 5-rib metal with a 1" in height, metal
Answer:	Show a pic of your description. I do know that the shears work great on corrugated metal
Question:	What drill do you use with this? What would you recommend
Answer:	I have used an 18 volt dewalt, and a corded milwaulkee drill. Don't know if a smaller than 18 volt would do very good.

Product description

The distinctive blue color of these chuck drivers is your assurance that they can withstand the kind of impact driver stress characteristic for each fastening application. And all Malco Impact-Grade power drivers are precisely machined for positive, fail-proof engagement of the fastener head. These Magnetic Hex Driver selections feature a spring-loaded, floating magnet that prevents breakage resulting from impact driver stress or higher profile hex head fasteners that may seat directly on the magnet.

• Hex Opening 5/16-inch
• Color Code Yellow
• Resists impact driver stress.
• Fail-proof engagement of fastener head.
• Unbreakable floating magnet.

Product description

Use air pressure for unstoppable shearing power! Combined with Malco's unique patent pending TurboShearFC Design, the TSF1A is the ultimate tool for those who want to make quick, clean cuts in fiber cement siding including window and door arches! Designed for cutting 5/16" (8mm) Fiber Cement Siding.

• Pneumatic fiber cement siding shear
• Use air pressure for unstoppable shearing power
• Make quick, clean cuts in fiber cement siding
• Attach to your existing cordless or A/C drill

User questions & answers

Question:	Will this tool cut 1/2" thick material
Answer:	absolutely NOT. The framing nailer uses a 21 degree strip nail. The finish gun uses a small gauge straight nail.
Question:	Compressor 2.6 cfm is ok
Answer:	Yes 20to 22 degree plastic collated nails will work

Product description

This sheet metal crimping attachment is designed to work with a minimum 12 volt DC cordless or maximum 7 amp AC corded IMPACT DRIVER. No set up or adjustment is needed. Immediately begin crimping multiple sizes, types, and thicknesses of round metal duct (Including spiral duct and metal stove pipe). It’s also easy to balance while using and stores comfortably in a pouch or bag when not in use.

• The compact turbo crimper impact is easy to Balance while in use and stores easily in a pouch or bag when not in use
• No set-up or adjustment is needed to immediately begin crimping multiple sizes
• No set up or adjustment is needed to begin crimping different types and thickness of round metal duct, including spiral duct, and metal stove pipe
• Designed to work with a minimum 12 volt DC cordless or maximum 7 amp AC corded impact Driver equipped with a quick release 1/4 inch hex Chuck

User questions & answers

Question:	The shaft broke, is there any way to repair it or do I need to buy a new one
Answer:	Yes, the DB769 7 In. Rapido Premium Continuous Rim Diamond Blade has an arbor size of 5/8". For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	What is the heaviest gauge metal these will crimp
Answer:	not sure what the QEP 700 saw is. sorry
Question:	Can I use my standard drill instead
Answer:	I haven't ever noticed sparks but I haven't really watched the gun closely while I am working. I am usually watching whatever I am nailing.
Question:	Has anyone tried to use this on 4” gutter downspout? Specifically 20oz copper and zinc
Answer:	Yes, I've used 2 inch nails.