14 best hose clamping tools

Product description

When you're looking to clamp-off a hose reach for these hose clamp pliers from Juvale! These pliers close off flexible hoses while leaving them undamaged. Use the locking mechanism to leave your hands free to repair! These pliers are heat resistant, lightweight, non-conductive and rust-proof. To prevent serious injuries please adhere to these guidelines below. Wear ANSI-approved safety goggles during use. Use only for repair and remove from the car after use. Keep hands and clamp away from radiator fans. Do not use on the damaged hoses. Do not use if the clamp has loose parts. Juvale was born from the belief that the happiest way to live is to keep things uncomplicated and easy. Juvale products are constructed from quality materials, designed with modern aesthetics for the needs of home today.

• Hose Clamps: These flexible hose pliers can lock into position leaving your hands free to repair; please note that these are not for use on rigid, reinforced, or high pressure lines
• Multi-Use: These are ideal to use on brake hoses, fuel hoses, gas lines, coolant hoses, radiator hoses, lawnmower fuel gas lines and more
• Reliable Material: These hose pliers are durable, light weight, non-conductive and rust-proof
• Dimensions: The large pliers measure approximately 9.93 x 2.12 x 0.75 inches, the medium pliers measure 7.18 x 1.87 x 0.75 inches, the small pliers measure 6.12 x 1.62 x 0.62 inches
• 3 Sizes: Our set comes with 3 fuel line clamps in 3 different sizes

User questions & answers

Question:	Are they parallel jaws when clamped on a hose? Images don't look like it
Answer:	There is a slight gap , but the hose fills it , & they do totally shut the line off , they worked fine for me , I used them on a hot tub repair so I didn’t have to drain tub .
Question:	Will this work to pinch off the water in flow valve for a jetski that is being towed
Answer:	It should work if it is a rubber hose.

• SAVE COOLANT & SAVE TIME: The ABN Hose Pincher Pliers 3-Piece Crimping Pinch-Off Tool Set – Automotive Pinching Radiator, Coolant, Heater, Fuel Pinch is a lifesaver when performing fuel line or coolant maintenance; Easily pinch off cooling hoses instead of losing coolant and it spilling all over engine on certain jobs such as valve cover gasket replacements; No need to drain systems before servicing; Ratcheting jaws allow for automatic locking to save you even more time
• EASY TO USE: Simply use the ratcheting mechanism on the pliers to close the jaws and squeeze shut your desired hose; Plier jaws swivel to ensure a complete shut off
• 3-IN-1 SET: Package includes pinch off pliers – a small 8-inch (20.3cm) long tool with a 1.5-inch (3.8cm) contact area, 10-inch (25.4cm) long tool with a 1.75-inch (4.4cm) contact area, and 12-inch (30.5cm) long tool with a 2-inch (5.1cm) contact area
• VARIOUS APPLICATIONS: Small 8-inch plier works great for pinching off small engine fuel hoses or fragile 1/4-inch (6.4mm) plastic water lines under your kitchen sink; Medium 10-inch and large 12-inch pliers clamp off radiator hoses on coolant recovery tank; This entire set can safely be used on washing machine drain hoses, automotive hose lines, radiator lines, fuel lines, coolant lines, and more with zero damage
• BUILT TO LAST: Plastic hose pinchers do not work efficiently and can easily become misaligned, break, or even damage your application hoses; This metal pliers set is extremely durable and safe to use on all hoses; All 3 pliers in set include metal serrated teeth that are strong and make it much quicker and easier than attempting to zip tie the hoses

User questions & answers

Question:	Where are these made
Answer:	About 1 1/2" and have very strong springs. The tips pivot forward and back, so they sit flat when the clamp is attached to various thicknesses of flat surfaces. The area behind these tips works better on round surfaces.

Product features

Check This Out! - ABN Hose Pinch-Off Pliers

Built to Last

These tools include metal serrated teeth that are strong and make it much quicker and easier than attempting to zip tie the hoses. There is no need to drain your systems before servicing, and the ratcheting jaws allow for automatic locking to save you even more time.

Easy to Use

To use, simply use the ratcheting mechanism to close the jaws and squeeze shut your desired hose. The plier jaws swivel to ensure a complete shut off, so there is no need to worry about leakage.

Various Applications

The small 8-inch plier works great for pinching off small engine fuel hoses or fragile plastic water lines under your kitchen sink, and the medium 10-inch and large 12-inch pliers clamp off radiator hoses on coolant recovery tank with zero damage.

Product description

Take apart an engine and replace fuel, oil, and water hoses with the ABN Hose Clamp Plier 9-Piece Set – Universal Automotive Fuel Hose, Oil Hose, Water Hose Removal Pliers Remover Tool Kit. The included tools squeeze together clamp tabs to take pressure off the hose. Simply slide the tool into the tab cover on the side of the connector and hold the locking tab in the open position while you pull them apart. This ratchet locking mechanism holds the clamp in the open position which saves your fingers from accidents and injuries. The long-reach hose clamp pliers with a flexible wire allows access to hard-to-reach areas and awkward angles, and the swivel jaws allow access hose clamps in any position. This 9-piece kit is packed inside a plastic blow-molded carrying case for your convenience. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

• [Cohesive Plier Clamp Set]: ABN Hose Clamp Plier 9-Piece Set is a one stop shop for taking apart an engine or replacing fuel, oil, and water hoses; Tools in the plyer kit squeeze together taking pressure off hose; Tools can hold the locking tab of connector in an open position leaving your hands free to work elsewhere
• [Built to Last]: Corrosion-resistant nickel chromium steel; Long-reach hose clamp pliers with 24-inch (61cm) flexible wire cable shaft allows access to awkward angles; Approximate 1.2 to 1.75-inch (3 to 4.4cm) jaw openings swivel to access hose clamps in any position (approximate 8-inch / 20.3cm overall length)
• [Comfortable Grip]: Molded, rubberized handles for less user fatigue and more productivity; Pliers feature a ratchet locking mechanism that holds clamp in an open position which saves your fingers from accidents and injuries
• [Portable Storage]: Heavy-duty 18.6 x 3.5 x 10.9 inch (47.2 x 8.9 x 27.7cm) plastic blow-molded case with handle for easy transportation, safe storage, and quick organization
• [Package Contents]: Includes a single hose clamp pliers, swivel jaw band clip pliers, swivel jaw spring wire clip pliers, flat band hose clamp pliers, angled flat band hose clamp pliers, hose removal pliers, circle-R (clic-R) collar pliers, screwdriver, and hose remover dismount hook.

User questions & answers

Question:	They made on USA
Answer:	The area behind the yellow tips grips the round tubing of the photo stand. If hanging a backdrop, you would wrap the fabric over the horizontal or vertical tube of the photo stand and use these like large spring clothes pins to hold the fabric in place. Squeeze the handles together and place it over the fabric and tube, then release the handles. The yellow tips hold well if attaching a backdrop to a flat iron rod or other secure flat edge, while the round part of the clamps hold better to round surfaces.
Question:	What part #A-1 for
Answer:	Dear customer, yes it's made of non-toxic materials. Hope my answer helps you. If you have any questions or problems, please contact the after-sales services at "[email protected]". Thanks.
Question:	will the clic pliers work for the one time use ear clamps
Answer:	Not sure how long they will last outdoors as Sunlight tends to make some plastic brittle over time. The spring will likely rust too, but for temporary use like photo shoots, I use them frequently.

Product features

BUILT TO LAST

Constructed from nickel chromium steel for ultimate strength and longevity.

Black oxide finish provides resistance to corrosion.

Rubberized handles allow less user fatigue and more productivity.

EASY TO USE

Simply slide the tool into the tab cover on the side of the connector and hold the locking tab in the open position while you pull them apart.

The long-reach hose clamp pliers with a flexible wire allows access to hard-to-reach areas and awkward angles, and the swivel jaws allow access hose clamps in any position.

Pliers feature a ratchet locking mechanism that holds the clamp in the open position which saves your fingers from accidents and injuries.

CONVENIENT STORAGE

Heavy duty plastic blow-molded case with handle for easy transportation, safe storage, and quick organization.

Features comfortable handle and secure locking latches. Measures at 18.6” x 3.5” x 10.9” inch.

EVERYTHING YOU NEED

Take apart an engine and replace fuel, oil, and water hoses with this Hose Clamp Plier 9-Piece Set.

The included tools squeeze together clamp tabs to take pressure off the hose.

9 Piece kit provides you with everything you need to unlock electrical connectors.

Who We Are

Auto Body Now is a family owned company based out of South Dakota. We provide the Midwest with the highest quality auto body supplies and car care products on the market. We have an exceptionally strong presence on Amazon, shipping over 50,000 products each month. In fact, if you have purchased any of your auto body supplies or car care supplies online, there is a good chance we have had the opportunity to serve you.

Product description

Standard BAND-IT Banding Tool. For use on band widths of 3/16" to 3/4". Comes with a spin handle retaining ring to keep parts intact. Tensions over 2,400 lbs of force and cuts off the tail of the clamp being formed. Used to apply BAND-IT Stainless Steel Band, Galvanized Carbon Steel Band, BAND-FAST, general use band and miscellaneous strapping. Drop forged tool with built in cutter. Spring loaded gripper lever improves ease of use. Blue, epoxy powder coated finish resists corrosive elements.

• Tensions over 2,400 lbs of force and cuts off the tail of the clamp being formed
• Used to apply BAND-IT Stainless Steel Band, Galvanized Carbon Steel Band, BAND-FAST, general use band and miscellaneous strapping
• Drop forged tool with built in cutter
• Spring loaded gripper lever improves ease of use
• Blue, epoxy powder coated finish resists corrosive elements

User questions & answers

Question:	What size band is this tool for
Answer:	Yes, there's only one right angle clamp in box, but you can buy two to get 10% OFF.
Question:	Can you get replacement parts like the cuter and wing handles
Answer:	YES!! WETOLS Wood Clamp is perfect for welding, framing, drilling, doweling, woodworking, making cabinet, installing furniture, box and picture frames, etc.
Question:	What size band is this tool for
Answer:	Aluminum
Question:	I am looking to attach wood planks around a steel pool. Could this be used to band them in place
Answer:	11 inches

Product features

C00169: Multi-Use Band Tensioning and Cut-Off Tool

Standard Band -IT Banding Tool. For use on band widths of 1/4" to 3/4". Used to apply Band -IT Stainless Steel Band, Galvanized Carbon Steel Band, Band -Fast, general use band and miscellaneous strapping. Drop forged tool with built in cutter. Spring loaded gripper lever improves ease of use.

• Blue, epoxy powder coated finish resists corrosive elements.
• Comes with a spin handle retaining ring to keep parts intact.
• Tensions over 2,400 lbs of force and cuts off the tail of the clamp being formed.

Band and buckle sold separately.

Product description

Band clamp tool. Hand tool for application of 5/8" band clamps. Imported tool. Pack of 1.

• Band clamp tool
• Hand tool for application of 5/8" band clamps
• Imported tool
• Pack of 1

User questions & answers

Question:	Do you have the hammer impact punch replacements for this tool
Answer:	I haven't tried those So I dont know. I have a dif
Question:	can this do 3/8 band clamps without the adapter
Answer:	These seem to be well made but not labeled. USA products are almost always stamped "USA"

Product description

OEMTOOLS 24689 3 PIECE HOSE PINCHING PLIERS SET These automotive tools will save you time, money, and frustration during common engine, radiator, brake, and power steering system repairs, just to name a few. Using pliers that don’t completely pinch off your fluid lines creates drips and spills which can be costly and a hassle to clean up. Fluid hose pinching pliers are the best, most convenient, and most efficient way to completely pinch off your fluid lines and hold them in place throughout long automotive repairs. This is an automotive tool set that no mechanic regrets having in their arsenal. These pinching pliers have so many uses: they’re a valuable addition to every gas line, brake system, engine, power steering, air conditioning, and radiator repair kit. PRODUCT SPECIFICATIONS - Comes with 3 hose clamp pliers: Small (1/8" to 5/16"), Medium (1/2" to 3/4"), Large (3/4" to 2-1/2") - Lightweight and Non-Metallic - Color: Green - Designed to clamp hoses shut and lock them into place - The pliers are designed with smooth, rounded jaws to prevent hose damage.

• 3 PIECE HOSE PINCHING PLIERS SET: Comes with Small (1/8" to 5/16"), Medium (1/2" to 3/4"), and Large (3/4" to 2-1/2") fluid hose pinching pliers
• WILL NOT DAMAGE HOSES: These lightweight and non-metallic hose clamp pliers provide a tight, no-slip grip on hoses and will not damage, break, or puncture your fluid lines
• EASY TO USE MONEY SAVING TOOL: Slide-locking design helps these flexible hose pinching pliers completely stop the flow of liquids through flexible hose lines; keep your brake, power steering, engine, and radiator fluids inside your car instead of draining them before repairs AND SAVE MONEY
• IMPORTANT FOR MANY COMMON REPAIRS: You need hose line clamps to perform a number of repairs including: Power Steering Repair, Radiator Repair, Fuel Line and Fuel Injector Repair, Water Pump Repair, Brake Line Repair, and more
• THOUGHTFULLY DESIGNED: Heat resistant plastic; Simple slide-lock mechanism; Strong clamping jaws; These automotive tools will keep every drop of fluid within your fluid lines during common repairs and will not damage sensitive auto parts

Product description

GEARWRENCH offers a variety of hose clamp and Pinch-Off pliers. The hose clamp pliers are available in straight, angled, heavy-duty, and corbin styles. They are used on flat band, corbin style, and flat ear style hose clamps. Hose Pinch-Off pliers are available to accept 4 hose diameters: up to 3/4", up to 1", up to 1-1/4", and up to 2-1/2". The hose clamp pliers are ideally used on a variety of hoses including radiator, water, air, heater, vacuum, and fuel lines. They're a must have for every mechanic's toolbox.

• Pinch off Pliers eliminate the need to drain a cooling system during servicing
• Pliers squeeze hoses shut, and jaws swivel for parallel clamping
• Automatically locking ratchet
• "Maximum capacity of 1" Outside hose diameter"
• Comfort grip handles to reduce user hand fatigue
• Not for use on wire-reinforced hose
• included components: Automatic Locking Ratcheting Hose Pinch Off Pliers
• power source type: Manual

User questions & answers

Question:	What size hoses will the145 work on
Answer:	1/2" - 5/8" - 3/4" .
Question:	Will these work on a vacuum line
Answer:	Yes, this tool is used to install banding with a buckle. Take a look at the banding and Ear-Lokt buckles to go with this tool.
Question:	Will this work for brake lines when removing s caliper
Answer:	They are ok
Question:	What is the max size hose these will work on
Answer:	it is for if you break your line

Product features

GearWrench 145 Hose Pinch Off Pliers

Hose Pinch Off Pliers

• Pinch off pliers eliminate the need to drain a cooling system during servicing
• Pliers squeeze hoses shut, and jaws swivel for parallel clamping
• Automatically locking ratchet
• Maximum capacity of 1" outside hose diameter
• Comfort grip handles to reduce user hand fatigue
• Not for use on wire-reinforced hose

Product description

This cinch tool is universal and can be used

with any ASTM F2098 stainless steel clamps

from any manufacturer with of sizes 3/8", 1/2",

5/8", 3/4" and 1" .It's factory-adjusted and

support directly using.



includes :1pc of cinch&remove tool

22pcs of 1/2” clamps

10pcs of 3/4” clamps

• Ratchet and self-releasing mechanism ensure a completed crimp
• The cinch&remove tool is constructedof durable high-quality steel with forging process to ensure integrated mechanical property and long service life
• It’s easy to switch cinch and remove function.And the ratchet design and self-release mechanism makes the cinch easy.The tool is factory-adjusted with no requirement for calibration tool
• Work with Stainless Steel Clamps of sizes 3/8", 1/2", 5/8", 3/4" and 1"
• This is a All-in-one kit for pex pipe installation,includes 1pc of cinch&remove tool,22pcs of 1/2” clamps and 10pcs of 3/4” clamps

User questions & answers

Question:	Can this be used to repair a broken pressure washer hose
Answer:	They don't. That's the bad thing about Amazon they sell very few replacement parts for the vast items they sell. That being said you can contact the manufacturer and they can send you a replacement part.
Question:	will the tool work on crimping external water hose ends
Answer:	It should not be much of a problem. The hammer impact dimple to lock the band after tensioning will not be in the exact center of the buckle if the band is against one side of the tool (off by 1/16"), but other wise should be fine.
Question:	I see some reviews reporting issues with the clamps that come with this, however these are old. Do I need to buy shark bite clamps
Answer:	This Band-it tool will handle a range of band sizes. The most common size used is 1/2", 5/8" & 3/4". Buy what size band you want and the buckles to suit. I mostly use S/S 5/8". Cheers John M.
Question:	I need 5/8 clamps
Answer:	I have always just bought the complete tool so not sure if you can buy the parts seperately

Product features

JWGJW Stainless Steel Pex Clamp

1). The PEX stainless steel cinch clamps is a high-quality cinch ring.

2). The ear clamp’s special design eliminates steps and/or overlaps on the inner circumference of the clamp for a 360° leak-free seal.

3). Due to the fact that this ring’s design is so compact, it is perfect for use in tight spaces – including those that a normal crimp tool would not typically reach.

4). TO INSTALL: Use A PEX clamp tool or PEX cinch tool which works with PEX clamps up to 1" in size

JWGJW PEX Clamp Cinch Tool Crimping Tool Crimper

1). The cinch&remove tool is constructedof durable high-quality steel with forging process to ensure integrated mechanical property and long service life

2). It’s easy to switch cinch and remove function.And the ratchet design and self-release mechanism makes the cinch easy.

3). This cinch tool is universal and works with stainless steel clamps of sizes 3/8", 1/2", 5/8", 3/4" and 1"

packing of products

1 PCS Clamp Cinch

10 PCS 3/4" SS Clamps

22 PCS 1/2" SS Clamps

Product description

Feature:

1.100%Brand New and high quality.

2.Reusable, durable, flexible and practical.

3.Their use is recommended when the hose is subject to rapid changes in temperature which cause expansion and contraction of the material used in the assembly. 

4.The Spring clip maintains pressure during this process, there by preventing leaks.

5.With 360 degree inner ring precision design,it prevents damage to pipeline effectively.10 different size spring clips,which fit for most air hose tube, water pipe, fuel line silicone hose, as well as carburetors,engines and etc.



Package includes:

 20*6mm Spring Clips

 20*8mm Spring  Clips

 20*10mm Spring Clips

 20*12mm Spring Clips

 20*14mm Spring Clips

 20*15mm Spring Clips

 20*16mm Spring Clips

 20*18mm Spring Clips

 20*20mm Spring Clips

 20*22mm Spring Clips

• 10 Popular Sizes--6mm/0.24",8mm/0.31",10mm/0.39", 12mm/0.47",14mm/0.55",15mm/0.59",16mm/0.63", 18mm/0.7",20mm/0.79",22mm/0.87".total 200pcs(each size 20pcs).
• Protect the Pipeline--Spring hose clips are designed to distribute pressure uniformly around the application zone.360 degree inner ring precision design,prevent pipeline from damage effectively.
• Reusable＆Practical--Made of high quality 65Mn spring steel,Corrosion and rust resistant,not easy to break,durable in use,reusable,flexible and practical.
• Simple to Use--Choose the proper size spring hose clamps that suitable for your pipe or hose, and then fasten them with clamp pliers,you're done it!
• Muitipurpose Use--Can be used for industrial use or household.The Spring Hose Clips Assortment Kit perfect used for fuel line,water pipe,air hose tube, silicone hose,etc.

Product description

Clamptite tools give you the ability to create a perfect, custom fitted clamp for your hoses in any application. Ideal for emergency applications such has a hose bursting in your vehicle, the tools can be used as banding tools, reducers or for creating custom clamps with any gauge wire and almost any type of wire you may have including stainless steel wire, tie wire, and even a wire clothes hanger. Clamptite saves you money on clamps by turning any inexpensive wire into the best clamp money can buy. Just under 6 inches in length the ClampTite tool is about the size of a pencil and is precision machined from stainless steel and alumabronze. The ClampTite tool provides a way of tightening wires wrapped around an object and then locking it in place. The ClampTite tool can be used with various sizes of wires, which eliminates space as well as strength issues, oftened encountered with screw operated worm gear type clamps. No matter if you're looking for a quick and effective emergency leak repair or a bullet proof means for securing nearly any material from rubber hoses to spliced wires, this new and innovative tool is a must have addition to any portable or shop tool chest. ClampTite quickly replaces ineffective or damaged conventional hose clamps with a temporary or permanent clamping mechanism formed from stainless steel safety wire. Clamps formed using ClampTite seal a full 360 degrees with no flat spots and can be used to band any type or size material.

• Makes clamps from ordinary wire, even coat hanger!
• A must for every toolbox!
• Repair hoses and handles!

User questions & answers

Question:	What gauge range of wire can be used
Answer:	1 1/4 -

Product description

PEX Crimping Set, Pex Crimping Pipe Fitting Tool, PEX Clamp Crimping Tool for Stainless Steel Clamps Sizes from 3/8" to 1" with 20pcs 1/2" and 10 pcs 3/4" Clamps set with Storage Bag

• This Pex tool meets the ASTM 2098 standard. Pex Crimping Set works with stainless steel clamps from any manufacturer to make PEX connections from 3/8" to 1"
• Perfect polishing provide no damage during crimping avoid leaking
• It’s easy to switch cinch. And the ratchet design and self-release mechanism will make the cinch easy. The tool is factory-adjusted with no requirement for calibration tool
• This is a 5 in 1 tool that can be used to crimp 3/8, 1/2, 5/8, 3/4 & 1" inch Stainless clamps. No Adjustment on the tool is needed to switch sizes.
• Package Includes: 1pc - Red handle Cinch Crimp tool, 1pc - Red handle pipe cutter, 20pcs 1/2" and 10 pcs 3/4" Clamps set, 1pc Storage Bag

User questions & answers

Question:	Where can I get User instructions for this item
Answer:	The crimper can be used from 1" to 3/8" crimp rings. But in the package it contains 1/2" and 3/4" crimp rings.
Question:	If the tool doesn't need calibration, why include the calibration tool? Also, no instructions were included. Can I get them somewhere
Answer:	I have used it on 3/4", 5/8" and 3/8" hoses with no issues.
Question:	Can this be used to crimp copper rings or just stainless steel ones? And is the crimper tool all metal besides that handle grips
Answer:	They work on any rubber hose fuel, vacuum etc.
Question:	The ad clearly states the tool can be used for removing. How
Answer:	You shouldnt pinch rubber brake lines. I believe they have more structure to them, than just regular rubber hoses. You will end up wrecking them. I believe it causes them to collapse afterwards when they are in use if youve damaged them by crushing the inner core by pinching them off.

Product features

Pex Crimping Clamp Cinch Tool

• Pex Crimping Set works with stainless steel clamps from any manufacturer to make PEX connections from 3/8" to 1"
• New design makes it be a multi-function tool which can cinch Clamps and remove the clamps from pipe to re-install
• It’s easy to switch cinch. Andthhe ratchet design and self-release mechanism makes the cinch easy.The tool is factory-adjusted with no requirement for calibration tool
• This is a 5 in 1 tool if can be used to crimp 3/8 , 1/2, 5/8, 3/4 & 1" inch Stainless clamps. No Adjustment on the tool is needed to switch sizes.

Pex Crimping Clamp Cinch Tool

This PEX Crimping Clamp Cinch tool also works with heavy duty rope clips, adjustable hose clamp for Car&Truck. As long as the length and width of the ear on the clamps are within the capacity.

Pex Crimping Clamp Cinch Tool

The ratchet safety-function bring fast and reliable installation.

PEX Cinch Crimp tool

• This cinch tool is universal and works with stainless steel clamps of sizes 3/8, 1/2, 5/8, 3/4 and 1-inch

Pex Crimping Clamp Cinch Tool Kit

• Package Includes: 1pc - Red handle Cinch Crimp tool, 1pc - Red handle pipe cutter, 20pcs 1/2" and 10 pcs 3/4" Clamps set, 1pc Storage Bag.

• Corrosion resistance: Bandwidth is 7mm, thickness is 0.6mm. High precision single ear stepless hose clamp 304 stainless steel, corrosion resistant, will not rust for long-term use.
• Increased clamping force: Hose clamps for sealing various types of hoses. Pliers increase clamping force and are designed for repairing pipes and piping systems.
• Smooth edge polishing: The cochlear design ensures continuous clamping during temperature changes or machine vibrations, smooth edges and avoids damage to the hose, perfect for DIY homeowners or professionals looking for a bundle of pipes.
• 360° stepless design: The internal narrow band design has no protrusions and gaps, providing a more concentrated sealing pressure. Suitable for indoor hot water pipes, air conditioning pipes, petrochemical pipelines, etc.
• Quick and easy to install, visualize the installation effect, and special treatment with edging technology to avoid damage to the pipe and ensure safety.

User questions & answers

Question:	How are the clamps packaged? Are they in plastic bags or does it come with a container
Answer:	Recommended wire gauge for this tool 18. The ranges that can be used are 23 gauge to 14 gauge. The thinner gauge(18) will require you not trying to really cinch down a project as the tensile strength is not very high on thinner gauge wire.
Question:	Is this acceptable for oxy/acetylene hoses
Answer:	If it is PEX connections but I suspect you have a braided power washer hose so no, the clamp will clamp down but the pressure hose most likely will not conform like pipe made like pex!
Question:	How is this packaged, is it in a kit
Answer:	Not sure what you are asking. This is for 1/2” and 3/4” pex Will work on shark bite clamps.
Question:	can this be used on rubber gas line
Answer:	You have the option of using ether type. I bought the cinch tool and extra clamps because they are the factory type. This meant that all my replacements or repairs were of factory standards. Tip....clamps can easily be removed by taking a pair of diagonal cutters, and twist the protruding pin. All the clamps are stainless steel and I haven't had any failures or difficulties. I also will have extra clamps so I can easily help some one else, with a RV plumbing issue. Shark bite clamps work great; but can get expensive, if you have multiple repairs. Hope this helps.

Product features

High quality crimper

The jaws are made of chrome vanadium steel, which is durable and will not collapse or deform, so the installation effect is always the same.

Product description

Product Type: High precision single ear stepless hose clamps with pincers Kit

Material: Single ear stepless hose clamps made of 304 stainless steel, corrosion-resistant

Feature: Edge polished smooth can avoid damage to the hose,narrowband design providing a more concentrated sealing pressure

Application: Products are used for rubber hose, plastic tubing, electrical cable, welding, and equipment hoses

Package: 80Pcs different size of hose clamps and pincers in a square paper box

Hose Clamp Listing: 6.00-7.00 mm -------------------- 10 pcs

7.00-8.70 mm -------------------- 15 pcs

8.8-10.50 mm -------------------- 15 pcs

10.3-12.8 mm -------------------- 10 pcs

12.8-15.3 mm--------------------- 10 pcs

15.3-18.5 mm--------------------- 10 pcs

17.8-21.0 mm--------------------- 10 pcs

A Pair of standard jaw pincers: Length: 25cm / 9.8'', Weight: 385g / 13.5oz

This product is professional single ear clamp pliers, made of high-quality steel, adjust the position to the ear when used, clamping in one step, avoid the secondary pressure

• 【Corrosion-Resistant】TUV approved, high precision single ear stepless hose clamps are made of 304 stainless steel. These clamps are anti-rust and corrosion resistant, a good choice for long-term use. Hose clamps are used to seal various types of hoses. Included pincer is used to increase clamp force. The jaws of the crimper are made of chrome vanadium steel, which is durable and will not collapse or deform. It is the perfect design for repairing pipes & plumbing systems.
• 【Cochlear Design】Cochlear design ensures continuous clamping during temperature changes, machine variations, or dimensional changes. The pipe is always in good sealing and fastening status.
• 【Polished Smooth Edge】The edge of all clamps are polished smooth, and they will not damage the hose. 360 ° Stepless Design, no inner protrusion/gap and Narrow band design provide a more centralized seal pressure.
• 【COMPLETE SPECIFICATIONS】This single ear hose clamp set comes with 7 common sizes: 6-7 mm, 7-8.7 mm, 8.8-10.5 mm, 10.3-12.8 mm, 12.8-15.3 mm, 15.3-18.5 mm, 17.8-21.0 mm. They are widely used in hoses and plastic pipes, especially suitable for plumbing, beverage, automotive, marine, motorcycle, and industrial applications. One Ear Clamp Pincer is included in this kit. The pincer has a plastic coated handle, easier to use when sealing the hose.
• 【SATISFACTION GUARANTEED】Leberna 80 Pcs 304 Stainless Steel Stepless Single Ear 7-21mm Hose Clamps with Pincers Crimper Tool Kit makes perfect toolset for household or industrial use. If for any reason you are not satisfied, return within 30 days. No question asked.

User questions & answers

Question:	For pex
Answer:	not sure about the copper rings i would think so, but the kit comes complete with many different size rings to use. Yes it is all metal except the grips. i am glad i bought mine i used it 7 times so far mostly on my rv water lines that like
Question:	How do you remove the clamp later on
Answer:	put the tool on as if you’re clamping it. Then work side to side and clamp will snap. Wear your safety squints

Product features

Leberna 80 Pcs 304 Stainless Steel Stepless Single Ear 7-21mm Hose Clamps with Pincers Crimper Tool Kit | Securing Pipe Hoses Automotive | Cinch Rings

Product Type: High precision single ear stepless hose clamps with pincers Kit

Material: Single ear stepless hose clamps made of 304 stainless steel, corrosion-resistant

Feature: Edge polished smooth can avoid damage to the hose, narrowband design providing a more concentrated sealing pressure

Application: Products are used for rubber hose, plastic tubing, electrical cable, welding, and equipment hoses

Package: 80Pcs different size of hose clamps and pincers in a square paper box

Hose Clamp Includes:

• 6.00-7.00 mm -------------------- 10 pcs
• 7.00-8.70 mm -------------------- 15 pcs
• 8.8-10.50 mm -------------------- 15 pcs
• 10.3-12.8 mm -------------------- 10 pcs
• 12.8-15.3 mm--------------------- 10 pcs
• 15.3-18.5 mm--------------------- 10 pcs
• 17.8-21.0 mm--------------------- 10 pcs

A Pair of standard jaw pincers: Length: 25cm / 9.8'', Weight: 385g / 13.5oz

This product is professional single ear clamp pliers, made of high-quality steel, adjust the position to the ear when used, clamping in one step, avoid the secondary pressure

Product description

Specification:

Corrosion-Resistant: TUV approved High precision single ear stepless hose clamps 304 stainless steel, Corrosion-Resistant , will not rust for long-term use

Increase Clamp Force: Hose clamps used to seal various types of hoses, pincers can increase clamp force, designed for repairing pipes & plumbing systems

Edge Polished Smooth: Cochlear design ensures continuous clamping during temperature changes or machine vibrations, edge polished smooth, avoid damage to the hose.

360°Stepless Design: There is no protrusion and gap in the inner, narrowband design providing a more concentrated sealing pressure

High quality crimper: The jaws are made of chrome vanadium steel, which is durable and will not collapse or deform, so the installation effect is always the same.

Perfect kit for the DIY home-owner or the professional looking to get started with plumbing bundle.

Perfect for Indoor hot water pipes, air conditioning pipes, petrochemical transport pipeline and so on

Package:

6-7mm: 20pcs

7-8.7mm: 20pcs

8.8-10.5mm: 20pcs

10.3-12.8mm: 20pcs

12.8-15.3mm：20pcs

15.3-18.5mm: 15pcs

17.8-21mm：15pcs

22.4-25.6mm: 10pcs

28.4-31.6mm: 10pcs

Single ear hose clamp crimper: 1pcs

• 【Corrosion-Resistant】TUV approved, high precision single ear stepless hose clamps 304 stainless steel, anti-rust for long-term use.
• 【Increase Clamp Force】Hose clamps used to seal various types of hoses, pincers to increase clamp force, design for repairing pipes & plumbing systems
• 【Edge Polished Smooth】Cochlear design ensures continuous clamping during temperature changes or machine vibrations, edge polished smooth, avoid damage to the hose.
• 【360°Stepless Design & Durable Crimper】No inner protrusion/gap, narrowband design ensures a more concentrated sealing pressure; with chrome vanadium steel jaw, not to collapse or deform.
• 【Good Pack Value】Perfect tool for DIY home-owner or professionalists, for Indoor hot water pipes, air conditioning pipes, petrochemical transport pipeline use.

User questions & answers

Question:	Would these work on 3/8 air compressor hose
Answer:	No all of it came in a box. Bags marked with sizes. Had to put it all in a container.
Question:	I want to make my own air hoses up, is this what I need
Answer:	It will work find on rubber fuel line
Question:	Does it come in storage a box
Answer:	I simply did a Google search and you will find two types of crimpers, the circular variety and the side crimp variety, which is what this tool is (a side crimper). Basically pretty easy, put the crimp connector over the PEX, position it within 1/8" to 1/4" from the end of the PEX, put the crimp connector's "head" into the tool, line it up perpendicularly to the PEX and squeeze the tool until it bottoms out. Done.
Question:	Maximum PSI that the clamps can withstand
Answer:	The calibration tool is not for the crimper! It is for the clamps to make sure they have been crimped correctly.

Product features

1pcs single ear hose clamp crimper + 150pcs Cinch Clamp Rings

The jaws are made of chrome vanadium steel, which is durable and will not collapse or deform, so the installation effect is always the same.