13 best peachtree woodworking k body clamps

Product description

Bora knows how important it is to rigidly clamp down your case goods and other woodworking projects. Rock-solid stability means more precise work. Our parallel jaw clamp is the woodworking clamp that both enthusiasts and professionals reach for. With the perfect amount of pressure 1, 100 lbs (500 kg), A 3 ½” (89 mm) throat with a padded jaw, and sizes that range from 12” to 50”, it becomes an extremely versatile tool for your clamping needs. Add in the little extras that make all Bora products stand out – in this case, a passive Lock bottom jaw, and large, easy-grip handle. Get one (or several) for your shop today.

• Strong and steady – the 3. 5-Inch wide padded jaw provides constant, even pressure without damaging material and the jaw stays in place when winding the Clamp
• Perfect pressure - not too loose, not too tight, just right with 1, 100lbs (500kg) of clamping pressure
• Multiple sizes - The Bora parallel jaw Clamp is right for any project, available in lengths: 12”, 24”, 31”, 40” and 50”
• Trusted Bora Quality - Bora knows how important rock-solid clamping is to woodworkers and designed this product based on end-user Feedback
• Includes two 40" Parallel Clamps
• Usable space: 41-1/4 in.

User questions & answers

Question:	Are the sizes of these clamps between the jaws? Or the overall length? Ie can you clamp a 40 inch wide tabletop in a 40 inch clamp
Answer:	This Kit includes the Command 500850 thermostat when purchased from WarmYourFloor, as shown in the image. Other sellers may have old stock with the old thermostat 500775, at a different price. Sorry for the confusion on the description, but the title is correct when purchased from WarmYourFloor, http://www.amazon.com/SunTouch-Programmable-Thermostat-Temperature-Installation/dp/B003FIBP6C/ref=sr_1_5?m=A2AZVIVOJYQ3SW&s=merchant-items&ie=UTF8&qid=1451751944&sr=1-5&refinements=p_4%3ASunTouch the Thank you for the question.
Question:	Are the heads of these reversable to use as spreaders
Answer:	Suntouch mats provide 12 Watts per Sq Ft, so a 30 Sq Ft mat = 360 Watts
Question:	Where are these made
Answer:	I would recommend directly contacting warmwire. They have assisted on all layout and technical questions.

Product features

40-Inch Parallel Clamp, Two-Pack

The Bora Tool 12-Inch Parallel Clamp delivers exceptional clamping pressure and performance with an easy-to-use design. The 3.5-inch padded jaws slide up and down with a simple lift of the handle, and they automatically become parallel as you tighten them on your project. Precision clamping has never been so easy.

Easy-Grip Handle

The large, easy-grip handle makes it easy to lift and release the jaw to slide along the bar. This enables you to work quickly so you can clamp your material and get right to work.

Anti-Slip Bottom Jaw

The mindfully engineered passive lock jaw stays in place while winding, ensuring the jaw will not move unless manually adjusted.

Material Is Safe From Damage

Our clamps have a 3.5-inch deep throat with a padded jaw that provides constant, even pressure without damaging your material.

Padded Jaws Provide Perfect Clamping Pressure

Not too loose, not too tight…our clamps provide the perfect amount of clamping pressure. At 1,100lbs. (500kg) you can count on the pressure being consistently even when using these clamps. This translates to carcass work that stays in shape, delivering the result you expect.

Clamps You Can Trust

With consistent clamping pressure and an exceptional hold, there’s no replacement for Bora's parallel clamp. Designed to rigidly clamp your case goods and other woodworking projects, their rock-solid stability will deliver a superior finished product that you can be proud of - every time.

Product description

The BORA 5-pc NGX Deluxe Set makes it faster and simpler to break down sheet material and rip boards with clean, accurate cuts every time.

• Includes: NGX 50-inch clamp edge, NGX 50-inch extension with connectors for 100-inches of cutting capacity, saw plate, two rolls of 55-inch non-chip strip, and a pair of track clamps
• Saw plate features fixed center molded channel helps reduce blade offset and guesswork
• 2 Rolls of 55-inch self-adhesive non-chip strip used for reducing top edge tear-out
• Track clamps easily attach to the clamp edge so you can easily cut any angle

User questions & answers

Question:	Will this new plate work with the old track
Answer:	I have a Bora track which I bought 5 years ago and the sled works fine with it. The tracks match up but I bought the new ones because I got tired of taking the long track apart to use on a shorter piece of work. Answer: mine work together.
Question:	Can be use for cutting ceramic tile
Answer:	I wouldn't. I bought this and returned it. I just completed a tile backsplash and used the 7" Skilsaw from Amazon. Worth the money though if I had to do again, I'd go one level up. I have no idea what I am doing but I did discover to use the right tool for the project or else you just end up frustrated.
Question:	How deep can a typical circular saw cut with this setup
Answer:	I ended up returning this but I am fairly certain it would cut just as deep as my circular saw would allow. My issue was it required a lot of tinkering when on the sled and I would end up rubbing the blade against the rail. It could have been user error, but I think a straight edge (even Bora's) without the sled worked just as well. I had bought the kit so I returned the whole thing and depending on the scope and scale of your project this might not be worth the money.
Question:	what is the hiegt of the track
Answer:	1/2 invh

Product features

BORA 5pc NGX Deluxe Set

It’s never been easier to rip, crosscut, and break down material than with the NGX Clamp Edge System. No more fumbling with adjustable clamp ends on opposite sides of the straight edge—the adjustable clamp is connected to the handle. Simply hook the Clamp Edge across your board, line it up with your cut, and clamp it down — all without moving your feet.

Pair of Track Clamps

Track clamps fit into the WTX or NGX Clamp Edge to make a more versatile system. You are able to make any angle quickly and accurately.

50-inch Clamp Edge

Made of heavy-gauge, rigid aluminum for extreme durability, the NGX clamp edge has a locking end that moves with the handle so you are able to make adjustments from one side.

50-inch Extension with Connectors

The NGX extension will add 50-inches of straight cutting to the NGX clamp edge - up to 100-inches. The connectors are included so you can easily attach the extension to the clamp edge.

Saw plate and Non-Chip Strip

The Saw Plate and Non-Chip Strip work together to save boards from tear-out. Simply press this self-adhesive strip onto the Clamp Edge and cut—this trims down the excess width of the strip so the edge of the Non-Chip Strip sits flat against your blade. For every future use, just line up the strip to your measuring mark for accurate, clean results.

Locks Into Place from One Side

Simply hook the Clamp Edge across your board, line it up with your cut, and clamp it down — all without moving your feet.

Easy Attach

The Clamp Edge's modular design allows you to easily add an extension to increase the cutting capacity, up to 100 inches. Connectors are included for easy set up.

Straight Angled Cuts

The Track Clamps (2 included) easily slide into the NGX clamp edge so you can quickly get set up to make straight, diagonal cuts using your clamp edge.

Strong Hold

Your saw has three points of contact to the Saw Plate so you have a secure hold while cutting, resulting in more precise cuts.

Product description

PAIR of KRE3531 parallel bar clamps!

BESSEY's K Body REVOlution parallel bar clamp has been redesigned to provide you with easier and more powerful clamping force than their previous model -- up to 1700 lbs! The new and improved operating jaw stays where you put it for easier set up; simply position the jaw where you want it and apply desired clamping force. Another new feature of this clamp is a steel socket running through the ergonomic handle that is designed to receive a hex key or driver on its end to provide more clamping force if desired (max torque 17Nm). Additionally, the jaws, which are designed to clamp at a 90-degree angle to the rail, provide a larger clamping surfaces than in the previous model and come with three removable pressure caps that are glue-, paint-, and solvent-resistant. Two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project.

The K Body REVOlution is easy to operate! To close and clamp your work-piece, tilt the handle down toward the rail, slide the jaw toward your work-piece, and tighten. Once positioned, the operating jaw will stay in place and provide you the clamping power you need, right where you need it. To remove the clamp, release the clamping pressure, and then simply pivot the handle up and away from the rail to slide the jaw away. Need a spreader? Simply remove the rail end clip, slide off the operating jaw and slide it back into the bar in the reverse position to give spreading support to your project, no tools required!

To maximize the potential of this clamp, consider purchasing the optional pivoting jaws (KR-AS) for your tapered work-piece clamping needs, and/or Bessey's framing blocks (KP Blocks) that, with four clamps, allow you to apply even clamping force at all four corners of your work-piece!

KRE3531 specs: 31" clamping capacity; 3-3/4" throat depth; 1700 lbs. of clamping force; 10" to 36-1/2" spreading capacity.

• Two 31" KRE3531 clamps: 31" of clamping capacity, a 3-3/4" throat depth, a 10" to 36-1/2" spreading capacity, and up to 1700 lbs. of clamping force!
• Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength.
• Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping.
• Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces; and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project.
• Easily converts to spreader without tools!

• ADJUSTABLE SIZE - Fit boards with a thickness of 3/16" - 3/4" for 90 degree corner and T-joints, also apply to assembly two board with different thickness
• SMOOTH STRONG SPRING - High spring tension to keep boards in place when screwing or gluing them together
• SINGLE HANDED OPERATION - It allows you to open this clamp with one hand,and hold workpieces together with the other
• HIGH EFFICIENCY- The advantage of having 4 pack angle clips is that you can square and set entire side of wood box in one
• GREAT SET for ARTS and CRAFTS - Perfect for small wood working project, to build wooden boxes, picture frames, birdhouse,mailbox, dresser drawers assembly

User questions & answers

Question:	Will this clamp 2x
Answer:	Hello,The mats can be cut and modified to fit any shape of room. The orange mesh can even be completely cut away and the wire be used by itself as long as you maintain the 3" spacing. The BLUE wire can NOT be cut or shortened. Good luck on your installation!

Product features

CASIMR 90 Degree Corner Clamp - ideal gift for your family and friends to do DIY at home

The need for wood working project, assembling furniture, mailbox, or setting up a cabinet arises frequently in any home or commercial place. 100% brand new CASIMR 90° corner clamp is a practical tool that you may need. This corner clamp is a go-to tool, it also is a handy tool for home DIYers, easy to use for woodworking, welding, screwing, aligning, nailing, making cabinets, box, and picture frames, and much more.

Fits panel thickness 3/16" - 3/4"

Adjustable to fits panel of different thickness

Smooth strong spring to keep boards in place

Specifications:

• Single Handle 90° corner clamp.
• Material: ABS+Strong Spring Steel.
• Max Jaw Opening: 3/4 inch/22cm.
• Min Jaw Opening: 3/16 inch/5cm.
• Fast and Simple Fixing

Packing List

• Set of 4 Right Angle Clamp.

• 4.5 inch long spring nylon clamp - Comes with 10 piece set
• Made of strong and rugged type of plastic - Heavy Duty
• Movable tips for maximum flexibility and tension
• Tempered steel spring applies consistent pressure
• Provides instant holding power and is easy to re-position during assembly, fastening, and gluing work

User questions & answers

Question:	Are these hard to squeeze open? I have some Pony metal clamps that are very difficult to squeeze open
Answer:	Hello,Thank you for your inquiry. The thermostat and controls sold separately and available in stock.Kind Regards,Faucet Town USA
Question:	What type of material are the spings made from? I want to ues this for fabric dying and certain metals with react with my dyes
Answer:	Good morning, You can not connect two mats in series, however, you can connect them in parallel and install up to 15AMPS on one thermostat meaning you can use multiple rolls to heat one area if needed.
Question:	Will this clamp go around a 1 1/2 PVC pipe
Answer:	We ordered the WarmlyYours UDG4-4999 nSpire Touch programmable T-stat with floor sensor for our shower. Just make sure to follow follow manufacturer directions for a wet location.
Question:	Can I used this for a washer machine hose
Answer:	You can trim the backing mat, but can not cut the heating wire.

Product features

Backdrop / Background

It is strongly fixed when installing back-drops for photo taking.

Cable Theorem

It can be used to clean up messy cables.

Wood working

It can be used to join trees or pick up drawings.

Picture

It can be used to display pictures.

Product description

Bora knows how important it is to rigidly clamp down your case goods and other woodworking projects. Rock-solid stability means more precise work. Our parallel jaw clamp is the woodworking clamp that both enthusiasts and professionals reach for. With the perfect amount of pressure 1, 100 lbs (500 kg), A 3 ½” (89 mm) throat with a padded jaw, and sizes that range from 12” to 50”, it becomes an extremely versatile tool for your clamping needs. Add in the little extras that make all Bora products stand out – in this case, a passive Lock bottom jaw, and large, easy-grip handle. Get one (or several) for your shop today.

• Strong and steady – the 3. 5-Inch wide padded jaw provides constant, even pressure without damaging material and the jaw stays in place when winding the Clamp
• Perfect pressure - not too loose, not too tight, just right with 1, 100lbs (500kg) of clamping pressure
• Multiple sizes - The Bora parallel jaw Clamp is right for any project, available in lengths: 12”, 24”, 31”, 40” and 50”
• Trusted Bora Quality - Bora knows how important rock-solid clamping is to woodworkers and designed this product based on end-user Feedback
• Usable space: 41-1/4 in.

User questions & answers

Question:	What is the O.D. of the clamp's acme screw and what is the screw made of
Answer:	The floor warming system can be installed in a bathroom. The floor warming system supplies 12 watts/ square foot.
Question:	Why won’t it open
Answer:	240 linear ft.
Question:	What is the thickness of the steel shaft
Answer:	This floor heating cable system includes the cable, thermostat, floor sensor, and aluminum foil tape to hold the cable in place prior to embedding it in a cement based mortar. If you would like a second floor sensor for back up that has to be purchased separately.

Product features

40-Inch Parallel Clamp

The Bora Tool 40-Inch Parallel Clamp delivers exceptional clamping pressure and performance with an easy-to-use design. The 3.5-inch padded jaws slide up and down with a simple lift of the handle, and they automatically become parallel as you tighten them on your project. Precision clamping has never been so easy.

Clamps You Can Trust

With consistent clamping pressure and an exceptional hold, there’s no replacement for Bora's parallel clamp. Designed to rigidly clamp your case goods and other woodworking projects, their rock-solid stability will deliver a superior finished product that you can be proud of - every time.

Easy-Grip Handle

The large, easy-grip handle makes it easy to lift and release the jaw to slide along the bar. This enables you to work quickly so you can clamp your material and get right to work.

Anti-Slip Bottom Jaw

The mindfully engineered passive lock jaw stays in place while winding, ensuring the jaw will not move unless manually adjusted.

Material Is Safe From Damage

Our clamps have a 3.5-inch deep throat with a padded jaw that provides constant, even pressure without damaging your material.

Padded Jaws Provide Perfect Clamping Pressure

Not too loose, not too tight…our clamps provide the perfect amount of clamping pressure. At 1,100lbs. (500kg) you can count on the pressure being consistently even when using these clamps. This translates to carcass work that stays in shape, delivering the result you expect.

Product description

This 31" fixed jaw parallel clamp features a large, flat parallel clamping surface made of impact and break resistant polyamide that comes with three replaceable pressure caps that are glue, paint and grease resistant. The internal frame ensures accurate 90-degree angles which are very sturdy even at maximum pressures. A large, comfortable two-component composite handle with a soft plastic insert makes a comfortable grip. Rail protection pieces made of same glue resistant polyamide elevate the workpiece from the rail, and the removable end rail clip ensures that the clamp sits parallel to the rail and can easily be removed to reverse sliding arm for use as a spreader.

• 31" fixed jaw parallel clamp
• Large, flat parallel clamping surface
• Internal frame ensures 90-degree angles even at maximum pressures
• Replaceable protection caps for delicate surfaces
• Easily converts to spreader without tools

User questions & answers

Question:	Is there 1 or 2 clamps
Answer:	The floor heating system can be installed under laminate or engineered wood floors, but not a traditional wood floor in which you are nailing down the floor because of the risk of putting a nail through the wire. Regardless of the flooring type, the floor heating system must be completely embedded in a polymer modified cement based mortar.
Question:	Are these still made in Germany
Answer:	You need to seal your concrete floor! Theres a great product on amazon here that gets down into concrete and seals up everything--it even pushes dirt and moisture out as its sealing! and you just spray it on. Its advertised to block radon, but its all the same different of sealing concrete (will make moisture barrier, block radon, etc.) I think its just called "Radonseal" and its in a big bucket; you'll also need a 1 gallon sprayer, they run about ten bucks. I would seal it before installing this product, as you'll get a lot more out of it. You'll still want to cover it with something so it can distribute its heat (like put in thinset or something like that) it doesn't have to be fancy tile. I did mine in thinset and threw a rug over it to make a warm place for my pets while i'm at work.
Question:	What is the differance between this clamp and the bessey kr3.531 31-inch k body revo fixed jaw parallel clamp
Answer:	No, but Kohler has a tub that has a built in heating element on the portion where you lean up against. I don't know how well it would heat the water, but I bet it would be nice.
Question:	does this model have the hex key tightening feature
Answer:	Yes, this floor heating system can be installed in a shower. As with any application, the system needs to be GFCI protected and embedded in cement based mortar.

Product description

GRR-RIPPER 3D Push Block is a must-have for any table saw user. A true MICROJIG Innovation. Essential Protection It's essential for superior precision, control and safety on your table saw and other major woodworking machinery. Protect your hands like never before, virtually eliminate kickback with unmatched control, and guide and rip with surgical precision. Extreme Control The powerful green grr-rip gives you a commanding hold over the work piece for total control. GRR-RIPPER has three legs to give you three-directions of control on the keeper and off-cut work piece. It provides downward pressure to virtually eliminate kickback, inward pressure to keep the stock against the fence, and forward pressure to prevent burning. Unmatched Precision Stabilize your cut with the built-in Balance Support to square your cut and safely handle the smallest parts of wood when cutting on the table saw or router table. Rip as accurate as a 1/4" Standard without readjusting the fence. Fully Adjustable The adjustable Center Leg accommodates for a variety of different sizes and widths of material while the grip secures a virtually unlimited variety of woods, solid surfaces, aluminum or even plastic. GRR-RIPPER handle can be angled and adjusted for your comfort and control. Total Versatility GRR-RIPPER videos feature over 30 unique uses on the table saw, router table, jointer, and band saws. The powerful hold, extreme accuracy, and versatile adjustability will help you maximize your materials and greatly improve your protection against dangerous accidents. Trusted Everywhere Over 400, 000 GRR-RIPPERs sold worldwide. Join the smartest woodworkers worldwide. MICROJIG is a true innovator and founded by woodworker, Henry Wang, in his home garage. MICROJIG has now sold over 1 Million Products in over 20 Countries! GRR-RIPPER - Don’t Use a Table Saw Without It. Work Safer. Work Smarter. Made in the USA. 100% Satisfaction. Extended 3-Year . Watch the action video and add to your cart today! Using two GRR-RIPPERs allows you to feed long stock continuously without stopping, virtually eliminating burning and blade marks caused by inconsistent feed rate. Parts come off the saw ready to use with little to no additional sanding or planing.

• Protect hands and prevent kickback like never before
• Powerful high-friction durable grip for extreme hold
• Precision cutting and control down to 1/4" Ripping
• Fully adjustable for easy handling
• Work with small stock safely on the table saw, Router table, Jointer, & Band saw
• Made in USA. A true MICROJIG Innovation.
• Extended 3-Year . 100% Satisfaction .

User questions & answers

Question:	How hard is it to level the jig when adjusting the side support
Answer:	The bit is capable of being set to the depth of 1/4. I have never personally made a dovetail this small though because I used the jig only a few times and I only worked with soft woods. I believe if hardwoods were being used 1/4 would be adequate depth.
Question:	I looked at the videos. Am I correct in assuming that you have to remove the blade guard in order to use this
Answer:	I believe the bit is a 3/8 dovetail bit. I bought mine when I bought the jig. I would look up the jig on amazon and go to the "people who bought this item often buy..." I think that's how I got mine. Hope this helps.
Question:	What is the absolute minimum thickness the jig will cut? I need to rip 1/4" strips
Answer:	Yes, you can make box joints with the 4210.
Question:	What is the difference between the gr 100 and the gr 200by model and is it worth the price difference
Answer:	I believe it's a 1/2" shank but I'm not absolutely sure. It's in my shop up in CT and I'm in NYC at the moment, so I can't check it. I'll check this weekend and send confirmation. But your router should be able to handle 1/4", 3/8" and 1/2" shanks with different collets.

Product features

Three directions of force gives you superior precision, control and safety.

1. Downward Virtually eliminates kickback.

2. Inward Keeps stock firmly against the fence .

3. Forward Controls and feeds both sides of the stock for cleaner cuts.

Unbelievable gripping power with Green-GRIP.

Green-GRIP is the proprietary non-slip material that gives you superior gripping power over workpieces and materials such as oak, cherry, walnut, ebony, pine, poplar, maple, plastics and aluminum. Treaded grooves provide increased traction on the workpiece even with sawdust. Easily cleaned with denatured or rubbing alcohol. No other push block’s grip comes close.

Virtually eliminates kickback on table saws.

The GRR-RIPPER’s unique design provides downward force, controlling the keeper and off cut workpiece. This prevents the workpiece from lifting up off the table top – virtually eliminating kickback. Inward Pressure keeps the workpiece guiding along the fence preventing it from catching the rear-rising teeth. This gives you a smoother, cleaner, and safer cut. Work safer.

Versatility – table saws, bandsaws, router tables, jointers, and more.

Rip long stock on the table saw by using two GRR-RIPPERs with the hand-over-hand or leapfrog technique.

Versatility – table saws, bandsaws, router tables, jointers, and more.

Use the GRR-RIPPER in the vertical position to resaw or veneer cuts firmly against the fence to prevent bandsaw drift and ensure a straight cut from beginning to end.

Versatility – table saws, bandsaws, router tables, jointers, and more.

Control your workpiece when freehand routing on your router table.

Versatility – table saws, bandsaws, router tables, jointers, and more.

For proper and safe face jointing, you need technique, and reliable heavy-duty holding power. Strengthen your operation with our Green-GRIP non-slip material.

GR-100 includes the following

GRR-RIPPER GR-100: Handle, Main Body, 3 Legs with Green GRR-RIP, Balance Support, Hardware.

Product description

Remember when you needed to clamp some stuff down? If you’ve gotten this far, odds are you know what a clamp is. I don’t need to tell you anything about clamps that you don’t already know. This two pack of WEN F-Clamps is especially great. The 36-inch steel bar combined with the 2.5-inch throat provide users maximum versatility to meet the needs of a variety of projects. The quick-adjust feature allows users to slide the clamp closed without pressing a single button. The clamp remains tight until you press the release lever and open the jaws back up. The ridged shaft creates stops every .05 inches while the additional micro-adjustment knob provides even more specificity than that. For even more force, crank the micro-adjustment knob to strengthen the grip on your workpiece. Non-marring pads protect your projects from the 600 pounds of force created by these two clamps. Remember when you had the perfect woodworking clamps? Remember WEN.

• Quick-adjust design: slide the clamp closed without pressing a single button
• Features a 36-inch steel rail and a 2.5-inch throat
• Micro-adjustment knob creates additional grip and precision
• Non-marring pads prevent scratching and scuffing to your projects
• Includes two powerful F-clamps for a clamping force of over 1200 pounds across your workpiece

User questions & answers

Question:	box size
Answer:	We are using these to hang mats that are full of fluid. They are very heavy duty and perfect for hanging the mats up for fluids to drain out. We use them in our hospital!
Question:	What’s the maximum length these can clamp at
Answer:	I doubt it, as picture frame construction requires special CLAMPS to ensure squareness
Question:	Will these rust if I leave them outside
Answer:	Yes. but I use them for holding down a biscuit jointer. They surprisingly strong.

Product description

The new K Body REVO clamp range from BESSEY offers some 30-Percent more clamping force, and newly-designed pressure caps and work-piece contact elements also protect the work-piece exceptionally well. The Vario K Body REVO clamp enables the head to be adjusted at the press of a button. The new K Body REVO clamp from BESSEY achieves a powerful 7,000 N clamping force - some 2,000 N more than usual. In addition, the jaw face has been increased by 30-Percent. Three removable and glue-repellent pressure caps guarantee work piece protection. Adjustable work piece contact elements prevent direct contact between the work piece and the serrated steel rail under full utilization of the jaw face. The tilting K Body clamp adapter (available separately) KR-AS which is easily pushed on to the clamping jaws enables clamping requirements outside of the 90-Degree range to be fulfilled. The tilting adapter adjusts to the work piece, regardless of whether fitted in a v-shape or at a slanted parallel. The additional module is infinitely tilt-able within a range of 30-Degree. 50-Inch K Body REVO, 1,500 lb clamping force, 3-3/4-Inch Throat depth, 3 removable jaw pads, 2 component ergonomic handle, removable material protector pads, removable end stop, can be attached to a work bench using Bessey TK-6 clamps

• Perfect Parallel jaw design for, 90-Degree clamping of materials, glue-ups of materials, general purpose clamping of wood, composites, plastics, light metals, and mixed materials, can be attached to work surfaces using TK-6 clamps
• 3-3/4-Inch throat depth, with 3 removable jaws pads designed to protect material surfaces, two rail protector pads designed to keep clamped material from contacting rail surfaces. Rail protector pads snap off when not needed.
• 1,500 lb clamping force, with ergonomic designed 2 component molded soft grip handle
• rapid action jaw opening and closing, simple raise handle away from steel rail and slide moveable jaw to desired point, reverse movable jaw for spreading
• cold drawn steel alloy rail with six serrated edges for secure, slip pro0f clamping, K Body REVO clamps sit flush on work surface for easy set ups

User questions & answers

Question:	Why are all of the two-packs so overpriced? The 50-inch clamps are $44 each ($88 for two) but the two-pack is $118?? do you get something extra
Answer:	800 W
Question:	Why are these so expensive here? they are around $50 retail at home depot. are these different
Answer:	Hi There, this will work for 110V only but if you use a converter you will be able to use it
Question:	what is the and depth and width of the clamp, wondering if the irwin 48 inches are larger in width. The irwin is 3.75 in depth no info on width
Answer:	I bought the purple dolphin on side cups work great. Came three to a package
Question:	Can I glue up something 48" wide with a 50" clamp
Answer:	Yes it will. It fits any standard Kcup in the market and also the refillable ones.

• The unique 2-3/16" wide tube rail construction keeps the PRO-Grip Clamps light and easy to use, yet more rigid than other similar clamps that are available.
• No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.
• Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.
• Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.
• How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.
• The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your project or application, you may need to apply more pressure by securing the lock lever to the appropriate position. Once secured, the ProGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time!

User questions & answers

Question:	can you hook two together to make
Answer:	You can’t hook together
Question:	The description says "The clamp rails accept many different accessories..." but I dont see any accessories. What is available
Answer:	I havent used them with accessories yet, but they do have 2 slots that would accept “t” bolts, and possibly hex bolts, so any accessory that works with “T” track should work with these. Specifically hold down clamps, and stops come to mind, but I believe you can also make home made sleds for a saw and/or router too.
Question:	Do the measures have metric? Also, do they slide
Answer:	No metric scale. The plastic rulers are not attached well, mine slid out when I hung them up. Had to use some double side tape to keep them in place.
Question:	Is there a Router Adapter available
Answer:	There is no specific router adapter (that I am aware of existing); just use your router base against the straight edge of the clamps, like you would with any other router base guide.

Product features

The Original ProGrip Straight Edge Guide System

No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.

Cut Straight on Large or Small Panels

The ProGrip Straight Edge Guide Clamps are the perfect solution for cutting larger panels down to size. With the unique clamping assembly along with the rigid aluminum rails, you'll be getting your projects done in no time. The ProGrip Clamps also provide you with a better way of cutting sheet goods. Typically we may use a table saw to do so, but we all know how cumbersome the large sheets can be, especially when its only one of us doing the work.

Cut Dados All Day Long!

Cutting dado slots for shelves can be challenging. The ProGrip Straight Edge Guide Clamps are the ideal way for cutting dados accurately and cleanly with your hand held router. Simply align and set the clamp exactly where you need it to be, then rout the dado slot. It truly is that easy!

Contractor Grade Materials and Construction

Each ProGrip Straight Edge Guide Clamp is made from a single piece of extruded aluminum. The extrusion has been designed to be extra rigid as well as lightweight. Perfect for the everyday rigors on the job site or around the workshop.

Cut Straight Lines Every time

It doesn't matter if you're using a circular saw, a router or even a trim router the results are the same. Simply make sure your ProGrip Straight Edge Guide Clamp is properly aligned and secure and you will be making straight cuts ever time you use it!

Extra Width For More Rigidity

The ProGrip Straight Edge Guide Clamps have an extra wide rail. This gives you more surface are to work with accessories or shop made jigs and fixtures you create. Both sides of the rail have identical track profiles making the clamp even more versatile.

Attach ProGrip Clamps quicker and easier than most any other clamp!

• The Rail Guide Coping Sled Pro is an indispensable tool for making precise, square, clean cuts for door and drawer fronts.
• When building cope and stick door and drawer fronts, one of the tasks that must be done is to cut the end grains of your rails. This sounds easy enough, however the narrower your rails are, the more difficult it is to hold the stock firmly up against a router table fence. Our Rail Guide Coping Sled Pro solves this issue and helps you make precise, square, clean cuts for rail and style doors, drawer fronts and most any other type of end grain cut on your router table.
• The idea behind the Rail Guide Coping Sled Pro is simple; hold your rails firmly at a 90 degree angle to your router table fence so you can feed your stock through the cutter for the cleanest, squarest cuts possible. When doing drawer fronts which often times use very narrow rails, this sled will prevent your stock from dipping or pushing in too far and also keeps your hands away from harm.
• We have included a single sacrificial block with the sled to get you started with your first profile. The sacrificial block helps to prevent end grain blowout at the back of your end grain cuts. Also included is an abrasive strip that is adhered to the adjustable fence. The abrasive strip keeps your stock from sliding or wandering during the coping process. That, along with the heavy duty hold down toggle keeps your stock firmly in place.
• Many sleds rely on the miter slot for reference. Our coping sled uses the fence as a reference instead. The Rail Guide Coping Sled Pro features a clear acrylic fence for reference which is offset and raised 2” above the base so you won’t cut into the sled. Using a fence rather than a miter bar mounted to the bottom means that you will always be parallel to the router table fence. This is a distinct time saving advantage as you will no longer have keep re-adjusting your router table fence
• This robust, full featured coping sled has a laminated ½” thick MDF base that slides across your router table surface effortlessly. The sled also features a large, heavy duty hold down toggle with a 1-5/8” hold down foot to keep your stock in place. The unit also includes two large and sturdy handles for guiding the sled through the cutter. The maximum stock size is 5” wide by 1 ¼” thick. Full instructions are included.

Product features

Fulton Rail Guide Coping Sled PRO

When you need to make clean, smooth and precise profile cuts on the end grain of your rail pieces it can get a little hairy. The Fulton Rail Guide Coping Sled PRO has been designed to make this part of the cabinet door and drawer building process much easier and safer. No longer worry about your piece dipping to far into the router bit and even worse losing control. This sled will help you produce wonderful looking and fitting end grain cuts each and every time you use it!

Beautiful Looking Joinery Doesn't Have To Be Difficult

When building doors and drawers for kitchen and bathroom cabinets we want everything to be just right. This includes the style and rail joinery the can be seen from the top and bottom of the doors and drawers. While the style cut runs the entire length of the work piece, the rail is usually a very small run of a couple of inches. In the past, many of us used to attempt this cut freehanded. The end grain cut of such a small section is not only dangerous, it often times produced less than desirable results. With the Fulton Rail Guide Coping Sled PRO, you will be able to not only make the cut with confidence, you will also produce wonderful looking rail end grain profiles with minimal tear-out. This makes for the ideal fit into the style piece

Clear Acrylic Guide Fence

The Clear Acrylic Guide Fence essentially pull double duty. First and foremost it provides you with a reference contact point to your router table fence. This means that when you are placing your stock on to the jig you simply align with the Clear Acrylic Guide Fence. An easy way to do this is to place the Rail Guide Coping Sled PRO against your router table fence with the Clear Acrylic Guide Fence flat against the router table fence. Then slide your stock piece on to the Rail Guide Coping Sled PRO with the end up against your router table fence and secure your work piece. This essentially aligns your stock with the Clear Acrylic Guide Fence. Please follow the instructions that come with the sled before making any cuts on your router table with the Rail Guide Coping Sled PRO.

The second duty that the Clear Acrylic Guide Fence does is it acts as a shield to keep debris from flying up at you while making your cuts. Since the guide is clear, you can see exactly what you are doing while still being protected.

Keep Your Stock Secure

With a solid base platform, a large toggle with an oversized hold down pad and an adjustable fence with a holdfast abrasive strip, you stock won't lift, dip or slide out of place when making your coping cuts. The large toggle with hold down pads provides more than enough pressure to keep your stock from popping up our out of the sled. The adjustable fence is pushed up against the front side of your stock to keep your stock from moving front to back. With the addition of a simple abrasive strip to the adjustable fence, your stock piece won't shimmy side to side either. This jig has got all the bases covered when it comes to securing your stock in place for safer, cleaner and smoother coping cuts.

Its Time!

Now that you know that there is a much better and safer way to make end grain coping cuts on you cabinet door and drawer rails, there's nothing holding you back! With the Fulton Rail Guide Coping Sled PRO you'll be able to make these cuts over and over again with the same great results every single time.

Product description

This Jorgensen bar clamp set is ideal for flat panel, box, cabinet, frame and panel doors assemblies or any other project that requires squareness or evenly applied pressure. Large steel reinforced jaws assure the distribution of clamping pressure over large areas. The jaws stay parallel to assure squareness and prevent work pieces from bowing or lifting. Built in clamp stand allows clamps to stand upright for one handed use and easier/quicker sliding head adjustment. The sliding head can be reserved on the bar and the clamp then acts as a spreader.

• Tips: The jaws are not parallel when opened, they are preset by an inclination of +/-0.5°, when you tight up and clamp the items, the clamps will be parallel.
• Perfect Parallel jaw design for, 90-Degree clamping of materials, glue-ups of materials, general purpose clamping of wood, composites, plastics, light metals, and mixed materials, can be attached to work surfaces using this clamp.
• Deep 3-3/4 inch jaw depth for optimized pressure distribution. Secure locking system prevents jaws from slipping. Features ergonomic designed 2 component molded soft grip handle.
• Rapid action jaw opening and closing, simple raise handle away from steel rail and slide moveable jaw to desired point, reverse movable jaw for spreading.
• This Jorgensen bar clamp set is ideal for flat panel, box, cabinet, frame and panel doors assemblies or any other project that requires squareness or evenly applied pressure.

User questions & answers

Question:	Can the clamp actually hold material 24 inches wide or will that be too close to the max width
Answer:	No minimum so zero to 24-1/4"
Question:	Are these made in USA
Answer:	I received two clamps in a box for the advertised price.
Question:	Are these clamps still being made (but in China), and if so, are they being made in any lengths other than 24" now
Answer:	I tired to order and got a message, they are out of stock. Maybe because of the good price. Don't know how I was able to order and get charged when it was out of stock? Still shows in stock :(
Question:	I own 16 older Cabinet Master clamps that need the fix so they don't get stuck in the locked position. Will the company continue this product support
Answer:	One clamp