14 best paint remover for metal wheel

Paint remover for metal wheels is a product specifically designed to strip old paint or coatings from metal wheel surfaces. It is an essential tool when refinishing or repainting wheels to achieve a clean and smooth finish. Here's what you need to know about paint removers for metal wheels:

  1. Types of Paint Removers:

    • Chemical Paint Removers: These are liquid or gel-based products that use chemical compounds to break down and soften the paint or coating on the metal wheel.They are typically applied with a brush or a roller.

    • Aerosol Paint Removers: Some paint removers come in aerosol spray cans, which allow for easy and even application. They are suitable for smaller wheel surfaces or touch-up work.

    • Gel Paint Removers: Gel-based paint removers are thicker and stickier than liquid versions, which makes them ideal for vertical surfaces and areas where you want the remover to cling to the surface.

    • Citrus-Based Paint Removers: These are eco-friendly alternatives that use natural citrus solvents to dissolve paint. They are generally less toxic and have a milder odor than traditional chemical paint removers.

  2. Safety Precautions:

    • Always work in a well-ventilated area or wear a respirator mask to avoid inhaling fumes.
    • Wear protective gloves and safety goggles to protect your skin and eyes from contact with the paint remover.
    • Follow the manufacturer's instructions carefully, including recommended application times and techniques.
  3. Application Process:

    • Clean the metal wheel surface to remove any dirt, grease, or debris.
    • Apply the paint remover evenly to the wheel's surface using a brush or other appropriate tools.
    • Allow the remover to sit for the recommended time, typically indicated on the product label.
    • Use a scraper, wire brush, or abrasive pad to gently remove the softened paint or coating.
    • Repeat the process if necessary until all the paint is removed.
    • Rinse the wheel thoroughly with water to remove any remaining residue from the paint remover.
  4. Disposal: Dispose of paint remover and any removed paint according to local environmental regulations. Some paint removers may be hazardous waste and should not be poured down drains or disposed of in regular trash.

  5. Follow-Up Steps:

    • After removing the paint, it's a good idea to sand the metal wheel's surface to create a smooth and even texture before applying new paint or coatings.
    • Apply a primer or base coat if you plan to repaint the wheels.
    • Finish with a topcoat or clear coat to protect the metal and achieve the desired look.

Using a suitable paint remover for metal wheels can help you efficiently strip away old paint or coatings, preparing the surface for refinishing or repainting. Be sure to choose a product that matches the type of paint or coating you need to remove and follow safety precautions to protect yourself and the environment.

Below you can find our editor's choice of the best paint remover for metal wheel on the market
  

Rust Remover Wheel Remove Paint and Oxidation Poly Strip Wheel Disc Abrasive Angle Grinding Wheel (5Pack - 4" x 60#)

Based on 192 reviews Check latest price

Product description

Product parameters



Name: Black Diamond Cup Wheel

Size:

4" x 60#" (100*16mm) : Diameter 4",Thickness 3/5",Aperture 5/8", Maximum speed 12500 (R.P.M), Maximum speed 80

Abrasive grain size: black silicon carbide 46#



Features:

✔ Elastic, will not damage the polished surface

✔ Easy to Strip Discs Clean & Remove Paint, Rust and Oxidation

✔ It does not damage the surface of the object, the grinding force is uniform, the processing effect is uniform and wear-resistant, the water resistance is strong, the plasticity is strong, the softness is good

✔ It is suitable for various shapes to be peeled off by the grinding body, the grinding sound is small, the dust is small



Scope of application:

✔ Sanding interface grinding

✔ Oil pipe burr removal

✔ Ceramic bottom polishing car surface paint removal and so on.

  • 🌞【RUST REMOVAL WHEEL MATERIALS】: Black Diamond Cup Wheel - The black diamond material is a high-strength, high-wearing honeycomb soft abrasive tool formed by combining high-strength wear-resistant fiber mesh as a substrate and organically combining resin elastomer and high-quality corundum with a special process.
  • 🌞【RUST REMOVER PAINT SIZE】: 4" x 60# (100*16mm) : Diameter 4",Thickness 3/5",Aperture 5/8", Maximum speed 12500 (R.P.M), Maximum speed 80, Abrasive grain size - black silicon carbide 46#
  • 🌞【SCOPE OF APPLICATION】: Wheel rust remover applies for sanding interface grinding, oil pipe burr removal, ceramic bottom polishing c1/2ar surface paint removal and so on. Easy to strip discs clean & remove paint, rust and oxidatio
  • 🌞【SCOPE OF INSTRUMENT】: Suitable for angle grinders of various models
  • 🌞【PAINT RUST REMOVER FEATURES】: It does not damage the surface of the object, the grinding force is uniform, the processing effect is uniform and wear-resistant, the water resistance is strong, the plasticity is strong, the softness is good, it is suitable for various shapes to be peeled off by the grinding body, the grinding sound is small, the dust is small

User questions & answers

Question: does this fit the Milwaukee angle grinder
Answer: Used it for rust on bumper and load ramps, worked great.
Question: I have about 20 ft of rusted ibeam to restore. Will this do the job
Answer: Yes,you can
Question: Can these be used on a Wagner Painteater
Answer: In my opinion, it is a 90* grinder which allows a flat surface to be sanded from a lateral position. I used this product to sand 50 years of paint off 4'X8', wooden porch screens. This conversion took a mundane turn of the century house porch and transformed it into a hybrid French/New Orleans look of gorgeous proportions. This was developed by the legendary Dee Stein of Neenah Wisconsin. Unfortunately, nobody had done proper service for 50 years and a deep layered collage of lead based and oil based paints covered the wood. The angle grinder has allowed me to lay these giant panels down and protectively sand the units down to the wood. Then I could repair the Dowling's and rescreen and repaint same. My experience says the 4-1/2 inch, (PURPLE) discs are best. They last longest and really eat up the still pliable paint elastics. PS: please use breathing protection (lead paints) and eye protection. Amazon prime has been an ideal source for both knowledge, parts, and equipment. Thank you.
Question: What is an Angel grinder? Is that a brand name, or does an angel come down and do the grinding for you
Answer: With Dewalt Rubber Backing Pad and Flat Screw that comes with the pad Amazon ASIN# B01B9J5R8U

3M 7772ES Paint and Rust Stripper, 4 in., 1 Disc

3M

Based on 319 reviews Check latest price

Product description

3M Paint and Rust Stripper 7772ES, 4in, Open Stock, One. For use on wood, metal, plastic or fiberglass. Cleans rusty surfaces with a double thick edge to strip quicker. Features Scotch Brite abrasive web that won't rust or splinter like wire brushes. Conforms to surface contours, reduces gouging and leaves a smooth paintable surface. Fits all standard household drills: 1/4 inch, 3/8 inch and 1/2 inch. Use as a rotary disc (on face) or as a brush (on edge).

From the Manufacturer

3M Paint and Rust Stripper easily removes paint from wood and metal surfaces. Cleans rusty surfaces and has a double-thick edge to strip quicker. Features Scotch-Brite abrasive web that will not rust or splinter. Fits all standard household drills.

  • Heavy duty automotive rust and paint stripper
  • Attaches easily to a standard electric drill
  • Double-thick scotch-bright web strips quicker
  • Lasts longer and cuts faster than conventional sandpaper
  • Conforms to surface contours

User questions & answers

Question: What is the width
Answer: It helps remove multiple layers of paint, both latex, and oil-based paints. It quickly removes polyurethane, epoxy, varnish, and shellac from wood, metal, and masonry surfaces. The thick, brushable paste clings to vertical surfaces without runs or drips. This paint remover does contain methylene chloride, a patent-pending formula less toxic, and no severe working conditions for the employees. Application: Pour into a metal container and apply a thick coat on with a paintbrush. Brush in one direction only. Leave the area and let the stripper do the work at least 15 minutes, before test scraping. If the finish is ready to be removed, scrape it off with your putty knife.
Question: Can you use this to remove pool calcium buildup on tiles
Answer: no
Question: The description says 11inches, and the photo shows 4 inches... Which is it
Answer: The container only states don't use on plastic, linoleum, rubber or sheet rock/ plaster. I'm using it for wood, glass and formica countertops. Hope this helps. You may need to email the company for the best information. Cheers Michael
Question: What is the difference between the 7772ES and the 7771? Is one coarser or something else
Answer: we have used it on wood to remove almost everything except marine grade. We even used it on brass so making a guess it might

LotFancy Stripping Disc, 6PCS 4 1/2” x 7/8” Quick Easy Strip and Clean Discs, Paint and Rust Remover Stripper for Angle Grinder, Silicon Carbide Abrasive Wheel for Wood Metal Fiberglass, Purple

LotFancy

Based on 14 reviews Check latest price
  • PREMIUM SILICON CARBIDE ABRASIVE: Each abrasive strip disc made from durable silicon carbide and bonded with strong fiberglass backing; Long lasting uniform grinding effect and improved cut rate
  • CLOG-RESISTANT & DURABLE: Stripping wheel with non-woven nylon webbing for effective, clog-resistant grinding; Less dust and low noise; Fiberglass backing to absorb vibration and offer additional durability and reinforcement
  • PAINT AND RUST REMOVER: Strip disc removes rust, paint, weld spatter, oxidation and coatings quickly and effortlessly, without damaging the original surface; -Purple strip discs have the longest service life and highest efficiency than the black and blue strip discs
  • DESIGNED FOR ANGLE GRINDERS: 4.5” Strip disc with 7/8" arbor fits angle grinder paint stripper. Note - DOES NOT FIT Wagnet paint eater
  • WIDE USE: Paint stripper is used for surface preparation, conditioning and finishing on metal, fiberglass, wood

Product features

Specifications

Material:silicon carbide abrasive

Backing Type: Fiberglass

Color: Blue / Black / Purple / Assorted

Size: 4.5” x 7/8” arbor (115x22mm)

Quantity: 6 pieces

Maximum speed: 13000RPM

Features

- Made from durable silicon carbide abrasive and bonded with strong fiberglass backing

- Polyurethane coated nylon webbing for effective clog-resistant grinding

- Uniform grinding effect, less dust and low noise

- Fast and effectively removes rust, dirt, paint, weld spatter, scaling, oxidation and other surface contaminates

- No damage to the original surface

- Widely used for grinding and polishing the surface of steel, aluminum, copper, plastic, fiber products, wood, stone, concrete, and more

- Black strip wheels are designed to remove light painting and coating

- Blue strip discs have a longer service life and higher strip efficiency than the black strip discs

- Purple strip discs have the longest service life and highest efficiency than the black and blue strip discs

Compatibility

4-1/2" Diameter with 7/8" Arbor disc set fits most 4.5 Inch Angle Grinder, compatible with DEWALT DCG414B, DWE402, Makita 9557PBX1, Bosch 1375A, GWS8-45, PORTER-CABLE PC60TAG, PCE810, Black & Decker BDEG400, G950 and more.

Note - DOES NOT FIT Wagnet paint eater

ABN Rust and Paint Stripping Disc Set - 4.5in Angle Grinder Paint Remover Disc 10 Pack Grinding Wheels with 7/8in Arbor

Based on 21 reviews Check latest price
  • [Remove Paint & Rust with Ease] Strip away oxidation, mill and pipe scale, and old finishes with the ABN 4.5-Inch Angle Grinder Paint Stripping Wheels; Unlike conventional sandpaper, wire brush disks, and cutting discs, these webbed angle grinder sanding discs will last longer and cut faster with minimal material loss
  • [Built to Last] Coarse silicon carbide abrasive material ensures aggressive grinding against rust and scale while the non-woven nylon webbing provides minor flexibility to work on curves and contours; Each grinding wheel paint removal disc has a 4.5-inch (11.4cm) diameter and a 5/8-inch (16mm) thickness
  • [Fits Your Tools] Each silicon carbide car paint stripper wheel tool has a 7/8-inch (22mm) arbor fitting that will attach easily to your angle grinder and drill arbor bits; Power tools allow you to work faster; Abrasive grinder wheel provides up to 11,000 RPMs; Grinder attachment not included
  • [Safe on Your Vehicle] Wide grinder cleaning wheels provides a uniform surface for greater consistency and power, but unlike grinding and cutting discs or wire brushes, these angle grinder discs will not damage the primary surface material or your vehicle body
  • [Ideal for Various Materials] Tough open webbing is clog resistant and strips impurities faster than standard sandpaper; Use on fiberglass, plastic, stone, wood, and metal to remove paint and finishes, mill scale and rust, adhesive, and epoxy

Product features

COARSE WEBBING

Silicon carbide impregnated nylon provides a coarse webbing construction that is safer and more flexible than wire brushes, hand scrapers, and cutting discs on your vehicle body or other working surfaces.

FIT FOR YOUR KIT

Each paint removing disc has a 4.5-inch diameter, a 5/8-inch thickness, and a 7/8-inch inner hole to fit your angle grinder arbor or mandrel.

BUILT TO LAST

Angle grinder stripping discs will last longer and cut faster with minimal material loss. Mainly used for surface treatment such as removing rust, burrs, and paint, or pre-treatment before auto repairs, welding, and weld cleaning. Grinder attachment not included.

Paint Stripping Disc Wheel 3 Pieces Rust Stripper Strip Discs for 4 x 5/8 Inch Angle Grinder for Wood Metal Fiberglass Products Removing Paint Coating Rust (Blue, Black, Purple)

Based on 52 reviews Check latest price

Product description



Paint stripping disc wheel 3 pieces rust stripper strip discs for 4 x 5/ 8 inch angle grinder for wood metal fiberglass products removing paint coating rust, 3 colors



Good helper:

The stripping wheel strip discs are helpful to remove paint, varnish, welding point, rust and so on, work well on items made of wood, metal and fiberglass.

Provide convenience to change the look of your item.



Different colors:

3 Colors of the paint stripping discs allow you to classify and distinguish easily.



Specifications:

Size: approx.4 x 5/ 8 inch/ 100 x 16 mm

Material: nylon silicon carbide

Color: blue, purple and black



Package includes:

3 x Strip disc



Note:

Since the size above is measured by hand, the size of the actual item you received could be slight different from the size above.

  • Wide usages: the paint removing disc is suitable for removing paint, varnish, welding point, rust, sealant and other surface contaminants, good for products made of wood, metal and fiberglass
  • 3 Colors: you will get 3 pieces stripping wheels in different colors including blue, purple and black, enough quantity to use, replace and share with families or friends
  • Material: these strip discs area made from nylon silicon carbide material, durable to use, help to remove rust and paint effortlessly but will not hurt your items
  • Proper size: each rust removal tool is approx. 4 x 5/ 8 inch/ 100 x 16 mm, big enough to clean your items, easy to store and carry
  • Fit 4.5 Inch angle grinder: the paint stripping wheel is compatible with 4.5 Inch angle grinder rather wagner paint eater

User questions & answers

Question: What grit are each color
Answer: I have forgotten which manufacturer's site I found this info on - and it didn't give specific grit values, but it identified purple as course, black as medium, and blue as fine.

5PCS Strip Discs Grinder 4" x 5/8" Stripping Wheel Strip Discs for Angle Grinders Clean Remove Rust Paint Varnish, Coating, Rust and Oxidation for Wood Metal Fiberglass Work

Soaoun

Based on 8 reviews Check latest price

Product description

Specifications:

The black adamas material is a high-strength, high-wearing honeycomb soft abrasive tool formed by combining high-strength wear-resistant fiber mesh as substrate and organically combining resin elastomer and corundum with a special process.

Rust remover wheel applies for sanding interface grinding, oil pipe burr removal, ceramic bottom polishing, surface paint removal and so on. 

Strip discs are easy to clean & remove paint, rust and oxidation.

Strip disc wheel is suitable for angle grinders of various models in the market.

Paint rust remover does not damage the surface of the object, the grinding force is uniform, the processing effect is uniform and wear-resistant, the water resistance is strong, the plasticity is strong, the softness is good, it is suitable for various shapes to be peeled off by the grinding body, the grinding sound is small and the dust is small.

 

Item Name: Grinding Wheel

Material: Black Adamas

Quantity: 5Pcs

Diameter: 100mm/4", Thickness: 3/5", Aperture: 5/8" (Approx.)

Maximum Speed: 12500RPM

Features: Universal, Solid, Clean Disc, Easy to Use

Size: 10cm x 10cm x 2cm/3.94" x 3.94" x 0.8" (Approx.)

 

Notes:

Due to the light and screen setting difference, the item's color may be slightly different from the pictures.

Please allow slight dimension difference due to different manual measurement.

 

Package Includes:

5 x Grinding Wheel



  • RUST REMOVAL WHEEL MATERIALS: Black Diamond Cup Wheel - The black diamond material is a high-strength, high-wearing honeycomb soft abrasive tool formed by combining high-strength wear-resistant fiber mesh as a substrate and organically combining resin elastomer and high-quality corundum with a special process.
  • SCOPE OF APPLICATION: Wheel rust remover applies for sanding interface grinding, oil pipe burr removal, ceramic bottom polishing surface paint removal and so on. Easy to strip discs clean & remove paint, rust and oxidatio
  • SIZE: Grinding Wheel Diameter 100mm/4", Thickness: 3/5", Aperture: 5/8" (Approx.) Maximum Speed: 12500RPM Size: 3.94" x 3.94" x 0.8" (Approx.)
  • PAINT RUST REMOVER FEATURES:Paint rust remover does not damage the surface of the object, the grinding force is uniform, the processing effect is uniform and wear-resistant, the water resistance is strong, the plasticity is strong, the softness is good, it is suitable for various shapes to be peeled off by the grinding body, the grinding sound is small and the dust is small.
  • SCOPE OF INSTRUMENT: the Clean Welds Grinding Wheel suitable for angle grinders of various models

Katzco Wire Wheels Brush - 2 Pack Knotted and Crimped Cups for Rust Removal, Corrosion and Paint - Hardened Steel Wire for Reduced Wire Breakage and Longer Life

Based on 550 reviews Check latest price
  • SET INCLUDES 2 wire wheel, 3” brushes: one knotted, one crimped.
  • SPIRAL KNOTTED WHEEL for precision deburring, removing rust, spatter, and paint.
  • 1/4” SHANK fits all drills; maximum RPM of 4500.
  • HARDENED STEEL MATERIALS for reduced wire breakage and long life.
  • VERSATILE for automotive and household applications; great for auto body shops, garages, and homes.

User questions & answers

Question: Will these work with pneumatic die grinders
Answer: According to a few sources (specifically from foreign importers in Europe and Australia) they are made in USA. I'm a bit surprised, because I'd expect them to be twice the price, considering that.
Question: Where is this manufactured (what country). USA
Answer: Sure, look for Chicago 208 piece rotary tool accessory kit.
Question: Is there a brush for a dremel tool
Answer: 1/4 inch.
Question: What is the shank diameter
Answer: Yes, most of these come the mandrel to attach to drill, unless you are buying refills. These work great and make the job EZ.

Chemical Guys SPI21516 Decon Pro Iron Remover and Wheel Cleaner, 16 fl. oz.

Chemical Guys

Based on 1 reviews Check latest price

Product description

DeCon Pro removes stubborn brake dust, iron deposits, and other embedded metallic contamination from wheels and lower body panels. Brake dust contains shards of iron and steel from brake rotors, brake pad friction material, and burnt carbon left over after intense braking. This material gets sprayed out from the brakes and embeds itself into wheels, lower body panels, undercarriage parts, and all over nearby vehicles. This brake dust is corrosive and abrasive, and without proper and quick removal, it causes a chemical reaction that leads to permanent rust damage, or scratches and swirl marks from improper cleaning. Chemical Guys DeCon Pro is a specialty gel that releases iron deposits and other ferrous metal contamination from automotive surfaces, then neutralizes the corrosive chemical reaction that leads to rust and paint failure. Specialty iron catalysts react with ferrous metals and turn purple once the chemical reaction releases embedded contamination from painted surfaces. DeCon Pro is the only pH balanced cleaner that removes deep contamination you can't even see. Add DeCon Pro to your wheel cleaning arsenal to remove tough brake dust from wheels, brake rotors and calipers, and undercarriage parts. Decontaminate painted surfaces, polished metals, and glass during a full detail for a deep and thorough clean you can see and feel. Break down the worst brake dust and embedded iron deposits before they destroy your paint with DeCon Pro.

  • Finish the car wash process with DeCon Pro, then follow up with clay bar service for thorough decontamination during a full detail
  • pH balanced formula safe for all wheel types, gloss paint, clear coat finishes, polished metal, chrome, and glass
  • Formula neutralizes the reactions that cause rust and paint failure caused by hot brake dust particles
  • Iron catalyst turns purple once reaction is complete
  • Add to wheel cleaning arsenal to remove toughest stuck on brake dust and contaminants

User questions & answers

Question: Can you clean forged aluminum wheels with this product
Answer: pH balanced formula safe for all wheel types, gloss paint, clear coat finishes, polished metal, chrome, and glass
Question: Is there any difference between this and the diablo wheel cleaner
Answer: This is designed to remove iron and other contaminants that might be stuck on. It turns from clear to purple if it comes to contact with iron so you can see. It's more of a heavy duty cleaner in my opinion. I'd use the diablo regularly and just use this every 5th wash or so.
Question: Diablo vs decon spray
Answer: I'd use Decon maybe once every 4 washes but use diablo in between. Decon every time would be overkill in my opinion
Question: where to buy it
Answer: Ummmmmm, right here on Amazon?

Product features

Take Iron Out Of The Equation

Modern vehicles easily achieve higher speeds and require stronger braking systems to stop in time. These powerful brakes spit out large amounts of hot, corrosive, and filthy brake dust all over wheels and brake parts, and all over the rest of the vehicle. The hot iron particles embed into the surface, and cannot be fully removed by normal car washing techniques or products. Clay bars pull up the embedded debris, but do nothing to neutralize the corrosion reaction started by the decaying iron particles. DeCon Pro helps release the stuck-on iron deposits from the surface, and neutralizes the chemical reaction that begins to destroy paintwork, clear coat finishes, polished metals, and wheel finishes.

Change You Can See On Contamination You Can’t

Microscopic brake dust and embedded iron particles may not always be visible to the eye, but the contamination actively destroys vehicles every day. DeCon Pro sprays on clear and changes color to deep purple once the catalyst reaction has released and neutralized iron corrosion from vehicle surfaces. Performance braking systems use carbon-ceramic or kevlar pads to generate tons of heat and stop the fastest modern cars in their tracks. The enormous braking force peels off billions of tiny steel shards from brake rotors, and spews burnt pad material and carbon all over vehicle surfaces and into the air. Freight and passenger trains use similar braking systems and kick up enormous amounts of rail dust into the air.

Decontaminate Automotive Surfaces

DeCon Pro is formulated for gentle cleaning action on the most common areas of iron contamination and pollution. Use DeCon Pro to release hot iron deposits from paintwork, polished metals, wheels, brake components, undercarriage parts, glass, and lower body panels closest to wheels and brakes. DeCon Pro is pH-balanced, non-caustic, and safe for all shiny and glossy wheel and paint finishes. Iron particles can cause abrasive swirls and scratches from improper removal, but they also break down painted finishes and promote rust and corrosion. Even after the particles are removed from paint, the reaction has started and can continue to destroy painted finishes on any vehicle.DeCon Pro actively neutralizes the chemical reaction in its tracks and stops corrosive damage from hot iron deposits before they cause total paint failure.

How It Works

DeCon Pro removes stubborn brake dust, iron deposits, and other embedded metallic contamination from wheels and lower body panels. Brake dust contains shards of iron and steel from brake rotors, brake pad friction material, and burnt carbon left over after intense braking. This material gets sprayed out from the brakes and embeds itself into wheels, lower body panels, undercarriage parts, and all over nearby vehicles. This brake dust is corrosive and abrasive, and without proper and quick removal, it causes a chemical reaction that leads to permanent rust damage, or scratches and swirl marks from improper cleaning.

Chemical Guys DeCon Pro is a specialty gel that releases iron deposits and other ferrous metal contamination from automotive surfaces, then neutralizes the corrosive chemical reaction that leads to rust and paint failure. Specialty iron catalysts react with ferrous metals and turn purple once the chemical reaction releases embedded contamination from painted surfaces.

DeCon Pro is the only pH-balanced cleaner that removes deep contamination you can’t even see. Finish the car wash process with DeCon Pro, then follow up with clay bar service for thorough decontamination during a full detail!

QuickT SDA702K 4 1/2" Rust Paint Stripper Remover Stripping Disc Abrasive Wheel Pad Tool for Angle Grinder - Pack of 5, 7/8" Arbor

Shop N Save Diamond Tools

Based on 88 reviews Check latest price

Product description

QuickT SDA702K 4.5 Inch quick stripping disk is designed for cleaning and removing paint, rust, oxidation, scaling, weld deposits from metal, wood, fiberglass and similar surfaces.



Use Cases

- Auto body paint and under coating removal, Prepares the surface for painting without damaging the under metal and vehicle body

- Welding weld line Scaling, oxidation, Removal and clean up weld lines

- Wood surface paint removal and surface preparation for painting

- Fiberglass cleanup and surface preparation



Improved Quality and Durability

Improved premium quality purple extra aggressive discs for higher performance faster cutting and longer life.



Clog-Resistant Webbing Design

The non-woven nylon webbing to avoid clogging in paint remover disc. Works faster and more effective in removing rust or paint.



Works with Angle Grinders

7/8" arbor for for quick connect, designed to work with angle grinders. Fiberglass backing for adequate support for nylon webbing during surface preparation and cleanup. Very effective with paint stripping tool



  • PACK OF 5 RUST PAINT STRIPPER - 4.5", Pack of 5 Versatile, Durable Cleaning and Stripping abrasive discs for paint, rust, scaling, oxidation removal, welding cleaning and similar usage
  • EFFECTIVE ON VARIOUS USAGE - Quick strip disc for Faster and Effective Auto paint, wood paint, rust, oxidation, scaling removal and cleanup. Angle grinder paint remover abrasive disc for faster surface preparation and cleaning
  • WORKS ON VARIETY OF SURFACES - Versatile abrasive stripping pads, works very effectively on metal, wood and fiberglass surface preparation, cleaning and debris removal
  • CLOG-RESISTANT & DURABLE - Stripping wheel pad with non-woven nylon webbing for effective clog-resistant grinding, Professional grade Advanced Purple colred striping disk for faster grinding, longer life and durability. Outlasts blue or black rust paint stripping disc pads
  • DESIGNED FOR ANGLE GRINDERS - Quick strip disc with 7/8" arbor that connects to angle grinder paint stripper. Note - Quickt paint striper disc DOES NOT FIT Wagnet paint eater

6 Pack 4” Strip Discs Rust Remover Wheel for Angle Grinders Clean and Remove Paint, Coating, Rust and Oxidation for Wood Metal Fiberglass Work

Product description

Product parameters



Name: Black Diamond Cup Wheel

Size:

4" x 60#" (100*16mm) : Diameter 4",Thickness 3/5",Aperture 5/8", Maximum speed 12500 (R.P.M), Maximum speed 80

Abrasive grain size: black silicon carbide 46#



Features:

✔ Elastic, will not damage the polished surface

✔ Easy to Strip Discs Clean & Remove Paint, Rust and Oxidation

✔ It does not damage the surface of the object, the grinding force is uniform, the processing effect is uniform and wear-resistant, the water resistance is strong, the plasticity is strong, the softness is good

✔ It is suitable for various shapes to be peeled off by the grinding body, the grinding sound is small, the dust is small



Scope of application:

✔ Sanding interface grinding

✔ Oil pipe burr removal

✔ Ceramic bottom polishing car surface paint removal and so on.

  • 【Abrasive Disc Wheel Clean Size】- 4" x 60# (100*16mm), Outer Diameter 4",Thickness 3/5",Aperture 5/8", Maximum speed 12500 (R.P.M), Maximum speed 80, Abrasive grain size - black silicon carbide 46#
  • 【Paint Stripper Discs Materials】 - Rust remover disc uses high-strength wear resistant fiber mesh as the base material, and organically combines resin elastomer and high-quality emery through a special process to form a high strength, high wear resistant, honeycomb shaped grinding wheel
  • 【Fits Angle Grinder】- Roloc disc fit for most 4" angel grinders, widely used for grinding and polishing of metal, glass fiber, wood, stone and other surfaces
  • 【Range of Application】- Easily remove paint, varnish, solder joints, rust, sealant, scale, oxidation and other surface contaminants. Poly strip disc wheel an ideal tool for surface treatment such as paint, rust, and scale removal
  • 【High Performance】- The grinding wheel will not damage the surface of the object, the grinding force is uniform, the processing effect is uniform, wear resistance, strong water resistance, strong plasticity and good softness. Dirt will not block the fine seams of the grinding surface, no rust, no fall off, low grinding sound and less dust

Katzco Rust/Paint Wire Wheel Remover - 4 1/2 Inch Heavy Duty and Durable Knotted Wire Wheel – Removes Paint, Rust and Corrosion

Based on 58 reviews Check latest price
  • WHAT YOU GET – 1 wire wheel, 4 1/2 Inch. - 11 threaded arbor. 1/4"" face, 7/8"" trim. 11,000 RPM max. A deep cleaning tool to remove paint, rusts and can even shine up metals. Fits all 4-1/2"" angle grinders with 5/8""
  • PERFECRT FOR – this is a perfect use for rust removal, corrosion and paint. This is ideal for heavy brushing actions like weld cleaning, deburring, and oxide removal. This wire wheel can be used to brush more rugged so that the cutting action can be more aggressive.
  • QUALITY MATERIALS – Our wire wheel remover is made up of premium quality materials that is proven and tested for its durability and functionality. Made of high quality bristle with innovative spiral knotted wires construction for a narrow face, rust, spatter and paint removal, surface conditioning and preparation. This has thick knotted wheel feature that is great for small spaces and borders.
  • IDEAL FOR HEAVY USE - Rust paint wire wheel remover can withstand heavy and abusive usage without affecting its lifespan. It is made with high quality materials and thick knotted wheel design feature. They support dynamic cutting and absorbs bending vibration that can cause wire fatigue.
  • WHY CHOOSE US: When it comes to purchasing your tools, you have plenty of options. However, a reputable company that cares about you and your project will help you experience a better result. Katzco has a large variety of tools, accessories and supplies to meet your immediate needs and your needs in the future.

User questions & answers

Question: What weed eater does it fit
Answer: Does not fit weed eaters nor meant to be used as eating weeds! It’s a 4 1/2” wire wheel for a hand held grinder to remove paint and rust. When I received mine it states a two pack, only received one and sent it back for that reason and it was not heavy duty as stated in the description.
Question: Is there one or two wheels in pack
Answer: There was only 1 wheel in the package that I received even though the product description says that it is a 2 pk.

10 pack 4-1/2" Replacement Disc for Paint & Rust Remover, Stripper

Based on 115 reviews Check latest price

Product description

Made of nylon impregnated with extra course Silicon Carbide abrasive grain, a highly flexible disc alternative to wire brush, hand scrapers and abrasive discs. Tough open web makes this product non-loading and cool-working, no harm to the work piece, even works in wet areas. It is also easy to clean with air.

  • They are used for cleaning rust and pain, coatings, welding blue, adhesives, and epoxy on any worked surface.
  • Ideal for removing and polishing and all kinds of surface conditions.
  • No harm to the work piece, even works in wet areas.
  • Conforms to contours and leaves a smooth, paintable surface
  • 4-1/2" Diameter with 7/8" Arbor fits Paint Remover and Angle Grinder

User questions & answers

Question: Will this remove loose paint from exterior concrete block home
Answer: I did use these replacement discs on a Bosch high speed grinder. Used them on heavy concrete stain paint on exterior cement walkway and I went through an entire 10 pack to strip the 3 layers of paint off for roughly 80 sq. feet of surface. It worked for me but the discs disintegrate fairly rapidly. Hope this information helps.
Question: Will this adapt to fit a 1/4" arbor for use on a drill
Answer: If your arbor has a spacer that will fit the 7/8 dia hole then yes. If not you would need to get a different arbor that has the spacer, they do make them.
Question: For use on painted brick
Answer: Yes!....but you will go through more discs than if you were to remove paint on car surfaces.
Question: Will this work on a grinder
Answer: Yes, our company uses these wheels on our 4 1/2” angle grinders to remove paint without damaging the metal underneath the paint

Porter Cable PXRARP01 Restorer Paint and Rust Remover Roller Wheel

Based on 93 reviews Check latest price

Product description

Rust and paint removal wheel for use with the Porter Cable Restoration Tool works on wood, metal and cement Durable rust and paint removal wheel for larger projects

  • Paint and Rust Remover Wheel
  • For use on all Porter Cable Restorer Tools
  • Includes 1 Wheel
  • Package dimensions:6.7"L x 3.46"W x 3.43"H

User questions & answers

Question: How do you prep a hood of a car for painting
Answer: I would not use the roller wheel. it will create to much heat and warp the hood. depending on how far you want to go on it, i would use 80 grit on a 6"da cut it down to the last coat (primer), then finish it with 180 grit. just don't heat up the hood to much in one spot, and use a medium to low speed. Hope this helps.
Question: I want to use this to prep pallet wood for rustic refinishing. I know this is a hard question, but how often will I need to replace this drum
Answer: Yea, it’s a hard question because it all depends on how often do you use it and how hard is the items you will be using it on.
Question: Does anyone know if this will fit eastwood’s contour sct tool
Answer: No it does not, I tried on my sct. The center hole is about half the size of the eastwood's.
Question: Is it like a sponge. If i was to use it to remove paint and it ran in to a nail tip wouls it rip of get damaged
Answer: No problem, will work great...

3M Paint and Rust Stripper Brush - 7771

3M

Based on 1 reviews Check latest price

Product description

3M Paint and Rust Stripper 7771NA 10 Brush Mandrels Hardware Department Open Stock Cleans rusty surfaces with a double-thick edge to strip quicker Features Scotch-Brite abrasive web that won't rust or splinter like wire brushes Conforms to surface contours reduces gouging and leaves a smooth paintable surface Fits all standard household drills 1/4-Inch 3/8-Inch and 1/2-Inch Use as a rotary disc (on face) or as a brush (on edge)

From the Manufacturer

3M Paint and Rust Stripper 7771NA 10 Brush Mandrels Hardware Department, Open Stock. Cleans rusty surfaces with a double-thick edge to strip quicker. Features Scotch-Brite abrasive web that won't rust or splinter like wire brushes. Conforms to surface contours, reduces gouging and leaves a smooth paintable surface. Fits all standard household drills: 1/4-Inch, 3/8-Inch and 1/2-Inch. Use as a rotary disc (on face) or as a brush (on edge).

  • Cleans rusty surfaces and has a double-thick edge to strip quicker
  • Features Scotch-Brite abrasive web that will not rust or splinter
  • Conforms to contours and leaves a smooth paintable surface
  • Fits all standard household drills
  • Use as a rotary disc (on face) or as a brush (on edge)

User questions & answers

Question: Does this disk come with the hardware (mandrel) to attach it to my drill
Answer: This is too large to be used on a Dremel - works fine on a regular drill.
Question: Can this work with dremel rotory tool
Answer: It will gouge wood and may leave non-removable aluminum oxide dust in the grain. It is very course and cleans metal aggressively. It is not a wood-sanding product.
Question: Can this be used to remove paint off wood or only metals
Answer: I don't think it is hard enough to effectively remove iron. Even on aluminum, it doesn't remove very much material, by design -- it's intended to take off the paint but leave the metal. I have successfully used an random orbit sander on cast iron pans, you just have to be careful that the sandpaper doesn't contain anything that will make you sick.
Question: Can this be used to grind smooth a new Lodge caste iron skillet
Answer: These buffs are quite hard. They take and hold polishing compounds well and stand up to hard use. I use them in the restoration of older firearms and they work well. I recommend them.

Product features

3M Paint and Rust Stripper Brush

Details

  • Grinding disc removes rust, scale, and old paint from metal
  • Multi-use abrasive works on metal, wood, fiberboard and plastics
  • Flexible non-woven nylon fiber disc will not rust or splinter
  • Coarse silicon carbide abrasive cuts fast to save time
  • Easily attaches to an electric drill with a ¼-inch mandrel

Latest Reviews

View all